diff --git a/charts/acmecertmanagerio-challenge-editor/Chart.yaml b/charts/acmecertmanagerio-challenge-editor/Chart.yaml index ab9232e843..37970e3488 100644 --- a/charts/acmecertmanagerio-challenge-editor/Chart.yaml +++ b/charts/acmecertmanagerio-challenge-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"acme.cert-manager.io","version":"v1","resource":"challenges"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Challenge Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: acmecertmanagerio-challenge-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/acmecertmanagerio-challenge-editor/README.md b/charts/acmecertmanagerio-challenge-editor/README.md index 6182a4fc09..d73183eccb 100644 --- a/charts/acmecertmanagerio-challenge-editor/README.md +++ b/charts/acmecertmanagerio-challenge-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/acmecertmanagerio-challenge-editor --version=v0.38.0 -$ helm upgrade -i acmecertmanagerio-challenge-editor appscode/acmecertmanagerio-challenge-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/acmecertmanagerio-challenge-editor --version=v0.39.0 +$ helm upgrade -i acmecertmanagerio-challenge-editor appscode/acmecertmanagerio-challenge-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Challenge Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `acmecertmanagerio-challenge-editor`: ```bash -$ helm upgrade -i acmecertmanagerio-challenge-editor appscode/acmecertmanagerio-challenge-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i acmecertmanagerio-challenge-editor appscode/acmecertmanagerio-challenge-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Challenge Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `acmecertmanagerio- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i acmecertmanagerio-challenge-editor appscode/acmecertmanagerio-challenge-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=acme.cert-manager.io/v1 +$ helm upgrade -i acmecertmanagerio-challenge-editor appscode/acmecertmanagerio-challenge-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=acme.cert-manager.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i acmecertmanagerio-challenge-editor appscode/acmecertmanagerio-challenge-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i acmecertmanagerio-challenge-editor appscode/acmecertmanagerio-challenge-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/acmecertmanagerio-order-editor/Chart.yaml b/charts/acmecertmanagerio-order-editor/Chart.yaml index b055e93d92..0fc21fd84d 100644 --- a/charts/acmecertmanagerio-order-editor/Chart.yaml +++ b/charts/acmecertmanagerio-order-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"acme.cert-manager.io","version":"v1","resource":"orders"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Order Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: acmecertmanagerio-order-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/acmecertmanagerio-order-editor/README.md b/charts/acmecertmanagerio-order-editor/README.md index 328249a065..e973586ff2 100644 --- a/charts/acmecertmanagerio-order-editor/README.md +++ b/charts/acmecertmanagerio-order-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/acmecertmanagerio-order-editor --version=v0.38.0 -$ helm upgrade -i acmecertmanagerio-order-editor appscode/acmecertmanagerio-order-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/acmecertmanagerio-order-editor --version=v0.39.0 +$ helm upgrade -i acmecertmanagerio-order-editor appscode/acmecertmanagerio-order-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Order Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `acmecertmanagerio-order-editor`: ```bash -$ helm upgrade -i acmecertmanagerio-order-editor appscode/acmecertmanagerio-order-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i acmecertmanagerio-order-editor appscode/acmecertmanagerio-order-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Order Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `acmecertmanagerio- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i acmecertmanagerio-order-editor appscode/acmecertmanagerio-order-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=acme.cert-manager.io/v1 +$ helm upgrade -i acmecertmanagerio-order-editor appscode/acmecertmanagerio-order-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=acme.cert-manager.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i acmecertmanagerio-order-editor appscode/acmecertmanagerio-order-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i acmecertmanagerio-order-editor appscode/acmecertmanagerio-order-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/addonopenclustermanagementio-addondeploymentconfig-editor/Chart.yaml b/charts/addonopenclustermanagementio-addondeploymentconfig-editor/Chart.yaml index 239c8e6330..000a73452a 100644 --- a/charts/addonopenclustermanagementio-addondeploymentconfig-editor/Chart.yaml +++ b/charts/addonopenclustermanagementio-addondeploymentconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"addon.open-cluster-management.io","version":"v1alpha1","resource":"addondeploymentconfigs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AddOnDeploymentConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: addonopenclustermanagementio-addondeploymentconfig-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/addonopenclustermanagementio-addondeploymentconfig-editor/README.md b/charts/addonopenclustermanagementio-addondeploymentconfig-editor/README.md index b12ec84a27..7646f1fd80 100644 --- a/charts/addonopenclustermanagementio-addondeploymentconfig-editor/README.md +++ b/charts/addonopenclustermanagementio-addondeploymentconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/addonopenclustermanagementio-addondeploymentconfig-editor --version=v0.38.0 -$ helm upgrade -i addonopenclustermanagementio-addondeploymentconfig-editor appscode/addonopenclustermanagementio-addondeploymentconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/addonopenclustermanagementio-addondeploymentconfig-editor --version=v0.39.0 +$ helm upgrade -i addonopenclustermanagementio-addondeploymentconfig-editor appscode/addonopenclustermanagementio-addondeploymentconfig-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AddOnDeploymentConfig Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `addonopenclustermanagementio-addondeploymentconfig-editor`: ```bash -$ helm upgrade -i addonopenclustermanagementio-addondeploymentconfig-editor appscode/addonopenclustermanagementio-addondeploymentconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i addonopenclustermanagementio-addondeploymentconfig-editor appscode/addonopenclustermanagementio-addondeploymentconfig-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AddOnDeploymentConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `addonopenclusterma Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i addonopenclustermanagementio-addondeploymentconfig-editor appscode/addonopenclustermanagementio-addondeploymentconfig-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=addon.open-cluster-management.io/v1alpha1 +$ helm upgrade -i addonopenclustermanagementio-addondeploymentconfig-editor appscode/addonopenclustermanagementio-addondeploymentconfig-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=addon.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i addonopenclustermanagementio-addondeploymentconfig-editor appscode/addonopenclustermanagementio-addondeploymentconfig-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i addonopenclustermanagementio-addondeploymentconfig-editor appscode/addonopenclustermanagementio-addondeploymentconfig-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/addonopenclustermanagementio-addontemplate-editor/Chart.yaml b/charts/addonopenclustermanagementio-addontemplate-editor/Chart.yaml index 22efd87105..5eed2f8452 100644 --- a/charts/addonopenclustermanagementio-addontemplate-editor/Chart.yaml +++ b/charts/addonopenclustermanagementio-addontemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"addon.open-cluster-management.io","version":"v1alpha1","resource":"addontemplates"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AddOnTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: addonopenclustermanagementio-addontemplate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/addonopenclustermanagementio-addontemplate-editor/README.md b/charts/addonopenclustermanagementio-addontemplate-editor/README.md index 9b5fd8c1c8..a523bff83a 100644 --- a/charts/addonopenclustermanagementio-addontemplate-editor/README.md +++ b/charts/addonopenclustermanagementio-addontemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/addonopenclustermanagementio-addontemplate-editor --version=v0.38.0 -$ helm upgrade -i addonopenclustermanagementio-addontemplate-editor appscode/addonopenclustermanagementio-addontemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/addonopenclustermanagementio-addontemplate-editor --version=v0.39.0 +$ helm upgrade -i addonopenclustermanagementio-addontemplate-editor appscode/addonopenclustermanagementio-addontemplate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AddOnTemplate Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `addonopenclustermanagementio-addontemplate-editor`: ```bash -$ helm upgrade -i addonopenclustermanagementio-addontemplate-editor appscode/addonopenclustermanagementio-addontemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i addonopenclustermanagementio-addontemplate-editor appscode/addonopenclustermanagementio-addontemplate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AddOnTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `addonopenclusterma Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i addonopenclustermanagementio-addontemplate-editor appscode/addonopenclustermanagementio-addontemplate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=addon.open-cluster-management.io/v1alpha1 +$ helm upgrade -i addonopenclustermanagementio-addontemplate-editor appscode/addonopenclustermanagementio-addontemplate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=addon.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i addonopenclustermanagementio-addontemplate-editor appscode/addonopenclustermanagementio-addontemplate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i addonopenclustermanagementio-addontemplate-editor appscode/addonopenclustermanagementio-addontemplate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/addonopenclustermanagementio-clustermanagementaddon-editor/Chart.yaml b/charts/addonopenclustermanagementio-clustermanagementaddon-editor/Chart.yaml index a7399c8f9d..4e045a1301 100644 --- a/charts/addonopenclustermanagementio-clustermanagementaddon-editor/Chart.yaml +++ b/charts/addonopenclustermanagementio-clustermanagementaddon-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"addon.open-cluster-management.io","version":"v1alpha1","resource":"clustermanagementaddons"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterManagementAddOn Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: addonopenclustermanagementio-clustermanagementaddon-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/addonopenclustermanagementio-clustermanagementaddon-editor/README.md b/charts/addonopenclustermanagementio-clustermanagementaddon-editor/README.md index 207fae7e32..91dc1fcab9 100644 --- a/charts/addonopenclustermanagementio-clustermanagementaddon-editor/README.md +++ b/charts/addonopenclustermanagementio-clustermanagementaddon-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/addonopenclustermanagementio-clustermanagementaddon-editor --version=v0.38.0 -$ helm upgrade -i addonopenclustermanagementio-clustermanagementaddon-editor appscode/addonopenclustermanagementio-clustermanagementaddon-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/addonopenclustermanagementio-clustermanagementaddon-editor --version=v0.39.0 +$ helm upgrade -i addonopenclustermanagementio-clustermanagementaddon-editor appscode/addonopenclustermanagementio-clustermanagementaddon-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterManagementAddOn Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `addonopenclustermanagementio-clustermanagementaddon-editor`: ```bash -$ helm upgrade -i addonopenclustermanagementio-clustermanagementaddon-editor appscode/addonopenclustermanagementio-clustermanagementaddon-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i addonopenclustermanagementio-clustermanagementaddon-editor appscode/addonopenclustermanagementio-clustermanagementaddon-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterManagementAddOn Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `addonopenclusterma Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i addonopenclustermanagementio-clustermanagementaddon-editor appscode/addonopenclustermanagementio-clustermanagementaddon-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=addon.open-cluster-management.io/v1alpha1 +$ helm upgrade -i addonopenclustermanagementio-clustermanagementaddon-editor appscode/addonopenclustermanagementio-clustermanagementaddon-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=addon.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i addonopenclustermanagementio-clustermanagementaddon-editor appscode/addonopenclustermanagementio-clustermanagementaddon-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i addonopenclustermanagementio-clustermanagementaddon-editor appscode/addonopenclustermanagementio-clustermanagementaddon-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/addonopenclustermanagementio-managedclusteraddon-editor/Chart.yaml b/charts/addonopenclustermanagementio-managedclusteraddon-editor/Chart.yaml index 030c108915..29aae2983a 100644 --- a/charts/addonopenclustermanagementio-managedclusteraddon-editor/Chart.yaml +++ b/charts/addonopenclustermanagementio-managedclusteraddon-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"addon.open-cluster-management.io","version":"v1alpha1","resource":"managedclusteraddons"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ManagedClusterAddOn Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: addonopenclustermanagementio-managedclusteraddon-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/addonopenclustermanagementio-managedclusteraddon-editor/README.md b/charts/addonopenclustermanagementio-managedclusteraddon-editor/README.md index 327a715797..adb6f30d06 100644 --- a/charts/addonopenclustermanagementio-managedclusteraddon-editor/README.md +++ b/charts/addonopenclustermanagementio-managedclusteraddon-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/addonopenclustermanagementio-managedclusteraddon-editor --version=v0.38.0 -$ helm upgrade -i addonopenclustermanagementio-managedclusteraddon-editor appscode/addonopenclustermanagementio-managedclusteraddon-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/addonopenclustermanagementio-managedclusteraddon-editor --version=v0.39.0 +$ helm upgrade -i addonopenclustermanagementio-managedclusteraddon-editor appscode/addonopenclustermanagementio-managedclusteraddon-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManagedClusterAddOn Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `addonopenclustermanagementio-managedclusteraddon-editor`: ```bash -$ helm upgrade -i addonopenclustermanagementio-managedclusteraddon-editor appscode/addonopenclustermanagementio-managedclusteraddon-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i addonopenclustermanagementio-managedclusteraddon-editor appscode/addonopenclustermanagementio-managedclusteraddon-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ManagedClusterAddOn Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `addonopenclusterma Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i addonopenclustermanagementio-managedclusteraddon-editor appscode/addonopenclustermanagementio-managedclusteraddon-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=addon.open-cluster-management.io/v1alpha1 +$ helm upgrade -i addonopenclustermanagementio-managedclusteraddon-editor appscode/addonopenclustermanagementio-managedclusteraddon-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=addon.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i addonopenclustermanagementio-managedclusteraddon-editor appscode/addonopenclustermanagementio-managedclusteraddon-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i addonopenclustermanagementio-managedclusteraddon-editor appscode/addonopenclustermanagementio-managedclusteraddon-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/addonsclusterxk8sio-clusterresourceset-editor/Chart.yaml b/charts/addonsclusterxk8sio-clusterresourceset-editor/Chart.yaml index 892c3f807c..99f6deb87c 100644 --- a/charts/addonsclusterxk8sio-clusterresourceset-editor/Chart.yaml +++ b/charts/addonsclusterxk8sio-clusterresourceset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"addons.cluster.x-k8s.io","version":"v1beta1","resource":"clusterresourcesets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterResourceSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: addonsclusterxk8sio-clusterresourceset-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/addonsclusterxk8sio-clusterresourceset-editor/README.md b/charts/addonsclusterxk8sio-clusterresourceset-editor/README.md index a3c9f8d7ec..93e1d87093 100644 --- a/charts/addonsclusterxk8sio-clusterresourceset-editor/README.md +++ b/charts/addonsclusterxk8sio-clusterresourceset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/addonsclusterxk8sio-clusterresourceset-editor --version=v0.38.0 -$ helm upgrade -i addonsclusterxk8sio-clusterresourceset-editor appscode/addonsclusterxk8sio-clusterresourceset-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/addonsclusterxk8sio-clusterresourceset-editor --version=v0.39.0 +$ helm upgrade -i addonsclusterxk8sio-clusterresourceset-editor appscode/addonsclusterxk8sio-clusterresourceset-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterResourceSet Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `addonsclusterxk8sio-clusterresourceset-editor`: ```bash -$ helm upgrade -i addonsclusterxk8sio-clusterresourceset-editor appscode/addonsclusterxk8sio-clusterresourceset-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i addonsclusterxk8sio-clusterresourceset-editor appscode/addonsclusterxk8sio-clusterresourceset-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterResourceSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `addonsclusterxk8si Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i addonsclusterxk8sio-clusterresourceset-editor appscode/addonsclusterxk8sio-clusterresourceset-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=addons.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i addonsclusterxk8sio-clusterresourceset-editor appscode/addonsclusterxk8sio-clusterresourceset-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=addons.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i addonsclusterxk8sio-clusterresourceset-editor appscode/addonsclusterxk8sio-clusterresourceset-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i addonsclusterxk8sio-clusterresourceset-editor appscode/addonsclusterxk8sio-clusterresourceset-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/addonsclusterxk8sio-clusterresourcesetbinding-editor/Chart.yaml b/charts/addonsclusterxk8sio-clusterresourcesetbinding-editor/Chart.yaml index 9327d3a2ed..605511fb6e 100644 --- a/charts/addonsclusterxk8sio-clusterresourcesetbinding-editor/Chart.yaml +++ b/charts/addonsclusterxk8sio-clusterresourcesetbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"addons.cluster.x-k8s.io","version":"v1beta1","resource":"clusterresourcesetbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterResourceSetBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: addonsclusterxk8sio-clusterresourcesetbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/addonsclusterxk8sio-clusterresourcesetbinding-editor/README.md b/charts/addonsclusterxk8sio-clusterresourcesetbinding-editor/README.md index df710ce8f8..02984a837b 100644 --- a/charts/addonsclusterxk8sio-clusterresourcesetbinding-editor/README.md +++ b/charts/addonsclusterxk8sio-clusterresourcesetbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/addonsclusterxk8sio-clusterresourcesetbinding-editor --version=v0.38.0 -$ helm upgrade -i addonsclusterxk8sio-clusterresourcesetbinding-editor appscode/addonsclusterxk8sio-clusterresourcesetbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/addonsclusterxk8sio-clusterresourcesetbinding-editor --version=v0.39.0 +$ helm upgrade -i addonsclusterxk8sio-clusterresourcesetbinding-editor appscode/addonsclusterxk8sio-clusterresourcesetbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterResourceSetBinding Editor on a [Kubernetes](http://k To install/upgrade the chart with the release name `addonsclusterxk8sio-clusterresourcesetbinding-editor`: ```bash -$ helm upgrade -i addonsclusterxk8sio-clusterresourcesetbinding-editor appscode/addonsclusterxk8sio-clusterresourcesetbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i addonsclusterxk8sio-clusterresourcesetbinding-editor appscode/addonsclusterxk8sio-clusterresourcesetbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterResourceSetBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `addonsclusterxk8si Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i addonsclusterxk8sio-clusterresourcesetbinding-editor appscode/addonsclusterxk8sio-clusterresourcesetbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=addons.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i addonsclusterxk8sio-clusterresourcesetbinding-editor appscode/addonsclusterxk8sio-clusterresourcesetbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=addons.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i addonsclusterxk8sio-clusterresourcesetbinding-editor appscode/addonsclusterxk8sio-clusterresourcesetbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i addonsclusterxk8sio-clusterresourcesetbinding-editor appscode/addonsclusterxk8sio-clusterresourcesetbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/addonskubestashcom-addon-editor/Chart.yaml b/charts/addonskubestashcom-addon-editor/Chart.yaml index 04c5820990..6b35795ab8 100644 --- a/charts/addonskubestashcom-addon-editor/Chart.yaml +++ b/charts/addonskubestashcom-addon-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"addons.kubestash.com","version":"v1alpha1","resource":"addons"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Addon Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: addonskubestashcom-addon-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/addonskubestashcom-addon-editor/README.md b/charts/addonskubestashcom-addon-editor/README.md index 6c054a5178..5e9da70318 100644 --- a/charts/addonskubestashcom-addon-editor/README.md +++ b/charts/addonskubestashcom-addon-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/addonskubestashcom-addon-editor --version=v0.38.0 -$ helm upgrade -i addonskubestashcom-addon-editor appscode/addonskubestashcom-addon-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/addonskubestashcom-addon-editor --version=v0.39.0 +$ helm upgrade -i addonskubestashcom-addon-editor appscode/addonskubestashcom-addon-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Addon Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `addonskubestashcom-addon-editor`: ```bash -$ helm upgrade -i addonskubestashcom-addon-editor appscode/addonskubestashcom-addon-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i addonskubestashcom-addon-editor appscode/addonskubestashcom-addon-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Addon Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `addonskubestashcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i addonskubestashcom-addon-editor appscode/addonskubestashcom-addon-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=addons.kubestash.com/v1alpha1 +$ helm upgrade -i addonskubestashcom-addon-editor appscode/addonskubestashcom-addon-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=addons.kubestash.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i addonskubestashcom-addon-editor appscode/addonskubestashcom-addon-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i addonskubestashcom-addon-editor appscode/addonskubestashcom-addon-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/addonskubestashcom-function-editor/Chart.yaml b/charts/addonskubestashcom-function-editor/Chart.yaml index 89c9aeee63..04cdcda2c0 100644 --- a/charts/addonskubestashcom-function-editor/Chart.yaml +++ b/charts/addonskubestashcom-function-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"addons.kubestash.com","version":"v1alpha1","resource":"functions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Function Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: addonskubestashcom-function-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/addonskubestashcom-function-editor/README.md b/charts/addonskubestashcom-function-editor/README.md index 54a577313c..91c7e67ed2 100644 --- a/charts/addonskubestashcom-function-editor/README.md +++ b/charts/addonskubestashcom-function-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/addonskubestashcom-function-editor --version=v0.38.0 -$ helm upgrade -i addonskubestashcom-function-editor appscode/addonskubestashcom-function-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/addonskubestashcom-function-editor --version=v0.39.0 +$ helm upgrade -i addonskubestashcom-function-editor appscode/addonskubestashcom-function-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Function Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `addonskubestashcom-function-editor`: ```bash -$ helm upgrade -i addonskubestashcom-function-editor appscode/addonskubestashcom-function-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i addonskubestashcom-function-editor appscode/addonskubestashcom-function-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Function Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `addonskubestashcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i addonskubestashcom-function-editor appscode/addonskubestashcom-function-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=addons.kubestash.com/v1alpha1 +$ helm upgrade -i addonskubestashcom-function-editor appscode/addonskubestashcom-function-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=addons.kubestash.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i addonskubestashcom-function-editor appscode/addonskubestashcom-function-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i addonskubestashcom-function-editor appscode/addonskubestashcom-function-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/admissionregistrationk8sio-mutatingwebhookconfiguration-editor/Chart.yaml b/charts/admissionregistrationk8sio-mutatingwebhookconfiguration-editor/Chart.yaml index ac19aec4ca..ec1d462532 100644 --- a/charts/admissionregistrationk8sio-mutatingwebhookconfiguration-editor/Chart.yaml +++ b/charts/admissionregistrationk8sio-mutatingwebhookconfiguration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"admissionregistration.k8s.io","version":"v1","resource":"mutatingwebhookconfigurations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MutatingWebhookConfiguration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: admissionregistrationk8sio-mutatingwebhookconfiguration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/admissionregistrationk8sio-mutatingwebhookconfiguration-editor/README.md b/charts/admissionregistrationk8sio-mutatingwebhookconfiguration-editor/README.md index eca720391d..fb155bd083 100644 --- a/charts/admissionregistrationk8sio-mutatingwebhookconfiguration-editor/README.md +++ b/charts/admissionregistrationk8sio-mutatingwebhookconfiguration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/admissionregistrationk8sio-mutatingwebhookconfiguration-editor --version=v0.38.0 -$ helm upgrade -i admissionregistrationk8sio-mutatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-mutatingwebhookconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/admissionregistrationk8sio-mutatingwebhookconfiguration-editor --version=v0.39.0 +$ helm upgrade -i admissionregistrationk8sio-mutatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-mutatingwebhookconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MutatingWebhookConfiguration Editor on a [Kubernetes](http: To install/upgrade the chart with the release name `admissionregistrationk8sio-mutatingwebhookconfiguration-editor`: ```bash -$ helm upgrade -i admissionregistrationk8sio-mutatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-mutatingwebhookconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i admissionregistrationk8sio-mutatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-mutatingwebhookconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MutatingWebhookConfiguration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `admissionregistrat Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i admissionregistrationk8sio-mutatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-mutatingwebhookconfiguration-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=admissionregistration.k8s.io/v1 +$ helm upgrade -i admissionregistrationk8sio-mutatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-mutatingwebhookconfiguration-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=admissionregistration.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i admissionregistrationk8sio-mutatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-mutatingwebhookconfiguration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i admissionregistrationk8sio-mutatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-mutatingwebhookconfiguration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/admissionregistrationk8sio-validatingwebhookconfiguration-editor/Chart.yaml b/charts/admissionregistrationk8sio-validatingwebhookconfiguration-editor/Chart.yaml index 9247a6ac66..5fde1cbdc1 100644 --- a/charts/admissionregistrationk8sio-validatingwebhookconfiguration-editor/Chart.yaml +++ b/charts/admissionregistrationk8sio-validatingwebhookconfiguration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"admissionregistration.k8s.io","version":"v1","resource":"validatingwebhookconfigurations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ValidatingWebhookConfiguration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: admissionregistrationk8sio-validatingwebhookconfiguration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/admissionregistrationk8sio-validatingwebhookconfiguration-editor/README.md b/charts/admissionregistrationk8sio-validatingwebhookconfiguration-editor/README.md index 2e903ac557..69e100d721 100644 --- a/charts/admissionregistrationk8sio-validatingwebhookconfiguration-editor/README.md +++ b/charts/admissionregistrationk8sio-validatingwebhookconfiguration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/admissionregistrationk8sio-validatingwebhookconfiguration-editor --version=v0.38.0 -$ helm upgrade -i admissionregistrationk8sio-validatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-validatingwebhookconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/admissionregistrationk8sio-validatingwebhookconfiguration-editor --version=v0.39.0 +$ helm upgrade -i admissionregistrationk8sio-validatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-validatingwebhookconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ValidatingWebhookConfiguration Editor on a [Kubernetes](htt To install/upgrade the chart with the release name `admissionregistrationk8sio-validatingwebhookconfiguration-editor`: ```bash -$ helm upgrade -i admissionregistrationk8sio-validatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-validatingwebhookconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i admissionregistrationk8sio-validatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-validatingwebhookconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ValidatingWebhookConfiguration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `admissionregistrat Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i admissionregistrationk8sio-validatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-validatingwebhookconfiguration-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=admissionregistration.k8s.io/v1 +$ helm upgrade -i admissionregistrationk8sio-validatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-validatingwebhookconfiguration-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=admissionregistration.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i admissionregistrationk8sio-validatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-validatingwebhookconfiguration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i admissionregistrationk8sio-validatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-validatingwebhookconfiguration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/apiextensionscrossplaneio-compositeresourcedefinition-editor/Chart.yaml b/charts/apiextensionscrossplaneio-compositeresourcedefinition-editor/Chart.yaml index 0ff0599055..c1360d4443 100644 --- a/charts/apiextensionscrossplaneio-compositeresourcedefinition-editor/Chart.yaml +++ b/charts/apiextensionscrossplaneio-compositeresourcedefinition-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apiextensions.crossplane.io","version":"v1","resource":"compositeresourcedefinitions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: CompositeResourceDefinition Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apiextensionscrossplaneio-compositeresourcedefinition-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/apiextensionscrossplaneio-compositeresourcedefinition-editor/README.md b/charts/apiextensionscrossplaneio-compositeresourcedefinition-editor/README.md index 04117b057e..7cf607f018 100644 --- a/charts/apiextensionscrossplaneio-compositeresourcedefinition-editor/README.md +++ b/charts/apiextensionscrossplaneio-compositeresourcedefinition-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apiextensionscrossplaneio-compositeresourcedefinition-editor --version=v0.38.0 -$ helm upgrade -i apiextensionscrossplaneio-compositeresourcedefinition-editor appscode/apiextensionscrossplaneio-compositeresourcedefinition-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/apiextensionscrossplaneio-compositeresourcedefinition-editor --version=v0.39.0 +$ helm upgrade -i apiextensionscrossplaneio-compositeresourcedefinition-editor appscode/apiextensionscrossplaneio-compositeresourcedefinition-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CompositeResourceDefinition Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `apiextensionscrossplaneio-compositeresourcedefinition-editor`: ```bash -$ helm upgrade -i apiextensionscrossplaneio-compositeresourcedefinition-editor appscode/apiextensionscrossplaneio-compositeresourcedefinition-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i apiextensionscrossplaneio-compositeresourcedefinition-editor appscode/apiextensionscrossplaneio-compositeresourcedefinition-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a CompositeResourceDefinition Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apiextensionscross Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apiextensionscrossplaneio-compositeresourcedefinition-editor appscode/apiextensionscrossplaneio-compositeresourcedefinition-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=apiextensions.crossplane.io/v1 +$ helm upgrade -i apiextensionscrossplaneio-compositeresourcedefinition-editor appscode/apiextensionscrossplaneio-compositeresourcedefinition-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=apiextensions.crossplane.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apiextensionscrossplaneio-compositeresourcedefinition-editor appscode/apiextensionscrossplaneio-compositeresourcedefinition-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i apiextensionscrossplaneio-compositeresourcedefinition-editor appscode/apiextensionscrossplaneio-compositeresourcedefinition-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/apiextensionscrossplaneio-composition-editor/Chart.yaml b/charts/apiextensionscrossplaneio-composition-editor/Chart.yaml index b76132e6c1..602f5b9042 100644 --- a/charts/apiextensionscrossplaneio-composition-editor/Chart.yaml +++ b/charts/apiextensionscrossplaneio-composition-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apiextensions.crossplane.io","version":"v1","resource":"compositions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Composition Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apiextensionscrossplaneio-composition-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/apiextensionscrossplaneio-composition-editor/README.md b/charts/apiextensionscrossplaneio-composition-editor/README.md index 1d680fe597..e4ccc01bdf 100644 --- a/charts/apiextensionscrossplaneio-composition-editor/README.md +++ b/charts/apiextensionscrossplaneio-composition-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apiextensionscrossplaneio-composition-editor --version=v0.38.0 -$ helm upgrade -i apiextensionscrossplaneio-composition-editor appscode/apiextensionscrossplaneio-composition-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/apiextensionscrossplaneio-composition-editor --version=v0.39.0 +$ helm upgrade -i apiextensionscrossplaneio-composition-editor appscode/apiextensionscrossplaneio-composition-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Composition Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `apiextensionscrossplaneio-composition-editor`: ```bash -$ helm upgrade -i apiextensionscrossplaneio-composition-editor appscode/apiextensionscrossplaneio-composition-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i apiextensionscrossplaneio-composition-editor appscode/apiextensionscrossplaneio-composition-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Composition Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apiextensionscross Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apiextensionscrossplaneio-composition-editor appscode/apiextensionscrossplaneio-composition-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=apiextensions.crossplane.io/v1 +$ helm upgrade -i apiextensionscrossplaneio-composition-editor appscode/apiextensionscrossplaneio-composition-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=apiextensions.crossplane.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apiextensionscrossplaneio-composition-editor appscode/apiextensionscrossplaneio-composition-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i apiextensionscrossplaneio-composition-editor appscode/apiextensionscrossplaneio-composition-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/apiextensionscrossplaneio-compositionrevision-editor/Chart.yaml b/charts/apiextensionscrossplaneio-compositionrevision-editor/Chart.yaml index cbc7af4c7c..90c8e5441a 100644 --- a/charts/apiextensionscrossplaneio-compositionrevision-editor/Chart.yaml +++ b/charts/apiextensionscrossplaneio-compositionrevision-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apiextensions.crossplane.io","version":"v1","resource":"compositionrevisions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: CompositionRevision Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apiextensionscrossplaneio-compositionrevision-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/apiextensionscrossplaneio-compositionrevision-editor/README.md b/charts/apiextensionscrossplaneio-compositionrevision-editor/README.md index 47241832c1..ef6bdeeeb5 100644 --- a/charts/apiextensionscrossplaneio-compositionrevision-editor/README.md +++ b/charts/apiextensionscrossplaneio-compositionrevision-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apiextensionscrossplaneio-compositionrevision-editor --version=v0.38.0 -$ helm upgrade -i apiextensionscrossplaneio-compositionrevision-editor appscode/apiextensionscrossplaneio-compositionrevision-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/apiextensionscrossplaneio-compositionrevision-editor --version=v0.39.0 +$ helm upgrade -i apiextensionscrossplaneio-compositionrevision-editor appscode/apiextensionscrossplaneio-compositionrevision-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CompositionRevision Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `apiextensionscrossplaneio-compositionrevision-editor`: ```bash -$ helm upgrade -i apiextensionscrossplaneio-compositionrevision-editor appscode/apiextensionscrossplaneio-compositionrevision-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i apiextensionscrossplaneio-compositionrevision-editor appscode/apiextensionscrossplaneio-compositionrevision-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a CompositionRevision Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apiextensionscross Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apiextensionscrossplaneio-compositionrevision-editor appscode/apiextensionscrossplaneio-compositionrevision-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=apiextensions.crossplane.io/v1 +$ helm upgrade -i apiextensionscrossplaneio-compositionrevision-editor appscode/apiextensionscrossplaneio-compositionrevision-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=apiextensions.crossplane.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apiextensionscrossplaneio-compositionrevision-editor appscode/apiextensionscrossplaneio-compositionrevision-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i apiextensionscrossplaneio-compositionrevision-editor appscode/apiextensionscrossplaneio-compositionrevision-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/apiextensionscrossplaneio-environmentconfig-editor/Chart.yaml b/charts/apiextensionscrossplaneio-environmentconfig-editor/Chart.yaml index fbb30eb3fd..70ca65715e 100644 --- a/charts/apiextensionscrossplaneio-environmentconfig-editor/Chart.yaml +++ b/charts/apiextensionscrossplaneio-environmentconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apiextensions.crossplane.io","version":"v1alpha1","resource":"environmentconfigs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: EnvironmentConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apiextensionscrossplaneio-environmentconfig-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/apiextensionscrossplaneio-environmentconfig-editor/README.md b/charts/apiextensionscrossplaneio-environmentconfig-editor/README.md index 6062940cc2..cb18f4b8f1 100644 --- a/charts/apiextensionscrossplaneio-environmentconfig-editor/README.md +++ b/charts/apiextensionscrossplaneio-environmentconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apiextensionscrossplaneio-environmentconfig-editor --version=v0.38.0 -$ helm upgrade -i apiextensionscrossplaneio-environmentconfig-editor appscode/apiextensionscrossplaneio-environmentconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/apiextensionscrossplaneio-environmentconfig-editor --version=v0.39.0 +$ helm upgrade -i apiextensionscrossplaneio-environmentconfig-editor appscode/apiextensionscrossplaneio-environmentconfig-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EnvironmentConfig Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `apiextensionscrossplaneio-environmentconfig-editor`: ```bash -$ helm upgrade -i apiextensionscrossplaneio-environmentconfig-editor appscode/apiextensionscrossplaneio-environmentconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i apiextensionscrossplaneio-environmentconfig-editor appscode/apiextensionscrossplaneio-environmentconfig-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a EnvironmentConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apiextensionscross Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apiextensionscrossplaneio-environmentconfig-editor appscode/apiextensionscrossplaneio-environmentconfig-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=apiextensions.crossplane.io/v1alpha1 +$ helm upgrade -i apiextensionscrossplaneio-environmentconfig-editor appscode/apiextensionscrossplaneio-environmentconfig-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=apiextensions.crossplane.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apiextensionscrossplaneio-environmentconfig-editor appscode/apiextensionscrossplaneio-environmentconfig-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i apiextensionscrossplaneio-environmentconfig-editor appscode/apiextensionscrossplaneio-environmentconfig-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/apiextensionsk8sio-customresourcedefinition-editor/Chart.yaml b/charts/apiextensionsk8sio-customresourcedefinition-editor/Chart.yaml index 6ecb41e54e..ff3836eeda 100644 --- a/charts/apiextensionsk8sio-customresourcedefinition-editor/Chart.yaml +++ b/charts/apiextensionsk8sio-customresourcedefinition-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apiextensions.k8s.io","version":"v1","resource":"customresourcedefinitions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: CustomResourceDefinition Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apiextensionsk8sio-customresourcedefinition-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/apiextensionsk8sio-customresourcedefinition-editor/README.md b/charts/apiextensionsk8sio-customresourcedefinition-editor/README.md index 906d7ab77d..311141b61d 100644 --- a/charts/apiextensionsk8sio-customresourcedefinition-editor/README.md +++ b/charts/apiextensionsk8sio-customresourcedefinition-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apiextensionsk8sio-customresourcedefinition-editor --version=v0.38.0 -$ helm upgrade -i apiextensionsk8sio-customresourcedefinition-editor appscode/apiextensionsk8sio-customresourcedefinition-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/apiextensionsk8sio-customresourcedefinition-editor --version=v0.39.0 +$ helm upgrade -i apiextensionsk8sio-customresourcedefinition-editor appscode/apiextensionsk8sio-customresourcedefinition-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CustomResourceDefinition Editor on a [Kubernetes](http://ku To install/upgrade the chart with the release name `apiextensionsk8sio-customresourcedefinition-editor`: ```bash -$ helm upgrade -i apiextensionsk8sio-customresourcedefinition-editor appscode/apiextensionsk8sio-customresourcedefinition-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i apiextensionsk8sio-customresourcedefinition-editor appscode/apiextensionsk8sio-customresourcedefinition-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a CustomResourceDefinition Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apiextensionsk8sio Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apiextensionsk8sio-customresourcedefinition-editor appscode/apiextensionsk8sio-customresourcedefinition-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=apiextensions.k8s.io/v1 +$ helm upgrade -i apiextensionsk8sio-customresourcedefinition-editor appscode/apiextensionsk8sio-customresourcedefinition-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=apiextensions.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apiextensionsk8sio-customresourcedefinition-editor appscode/apiextensionsk8sio-customresourcedefinition-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i apiextensionsk8sio-customresourcedefinition-editor appscode/apiextensionsk8sio-customresourcedefinition-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/apiregistrationk8sio-apiservice-editor/Chart.yaml b/charts/apiregistrationk8sio-apiservice-editor/Chart.yaml index 306c8a1e77..eb05cabc44 100644 --- a/charts/apiregistrationk8sio-apiservice-editor/Chart.yaml +++ b/charts/apiregistrationk8sio-apiservice-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apiregistration.k8s.io","version":"v1","resource":"apiservices"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: APIService Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apiregistrationk8sio-apiservice-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/apiregistrationk8sio-apiservice-editor/README.md b/charts/apiregistrationk8sio-apiservice-editor/README.md index 11670e9c9c..857fe02dc0 100644 --- a/charts/apiregistrationk8sio-apiservice-editor/README.md +++ b/charts/apiregistrationk8sio-apiservice-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apiregistrationk8sio-apiservice-editor --version=v0.38.0 -$ helm upgrade -i apiregistrationk8sio-apiservice-editor appscode/apiregistrationk8sio-apiservice-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/apiregistrationk8sio-apiservice-editor --version=v0.39.0 +$ helm upgrade -i apiregistrationk8sio-apiservice-editor appscode/apiregistrationk8sio-apiservice-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a APIService Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `apiregistrationk8sio-apiservice-editor`: ```bash -$ helm upgrade -i apiregistrationk8sio-apiservice-editor appscode/apiregistrationk8sio-apiservice-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i apiregistrationk8sio-apiservice-editor appscode/apiregistrationk8sio-apiservice-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a APIService Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apiregistrationk8s Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apiregistrationk8sio-apiservice-editor appscode/apiregistrationk8sio-apiservice-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=apiregistration.k8s.io/v1 +$ helm upgrade -i apiregistrationk8sio-apiservice-editor appscode/apiregistrationk8sio-apiservice-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=apiregistration.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apiregistrationk8sio-apiservice-editor appscode/apiregistrationk8sio-apiservice-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i apiregistrationk8sio-apiservice-editor appscode/apiregistrationk8sio-apiservice-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/appcatalogappscodecom-appbinding-editor/Chart.yaml b/charts/appcatalogappscodecom-appbinding-editor/Chart.yaml index a78ee781fe..7b4073a489 100644 --- a/charts/appcatalogappscodecom-appbinding-editor/Chart.yaml +++ b/charts/appcatalogappscodecom-appbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"appcatalog.appscode.com","version":"v1alpha1","resource":"appbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AppBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: appcatalogappscodecom-appbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/appcatalogappscodecom-appbinding-editor/README.md b/charts/appcatalogappscodecom-appbinding-editor/README.md index e5dde0ff35..7cafd06229 100644 --- a/charts/appcatalogappscodecom-appbinding-editor/README.md +++ b/charts/appcatalogappscodecom-appbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/appcatalogappscodecom-appbinding-editor --version=v0.38.0 -$ helm upgrade -i appcatalogappscodecom-appbinding-editor appscode/appcatalogappscodecom-appbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/appcatalogappscodecom-appbinding-editor --version=v0.39.0 +$ helm upgrade -i appcatalogappscodecom-appbinding-editor appscode/appcatalogappscodecom-appbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AppBinding Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `appcatalogappscodecom-appbinding-editor`: ```bash -$ helm upgrade -i appcatalogappscodecom-appbinding-editor appscode/appcatalogappscodecom-appbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i appcatalogappscodecom-appbinding-editor appscode/appcatalogappscodecom-appbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AppBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `appcatalogappscode Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i appcatalogappscodecom-appbinding-editor appscode/appcatalogappscodecom-appbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=appcatalog.appscode.com/v1alpha1 +$ helm upgrade -i appcatalogappscodecom-appbinding-editor appscode/appcatalogappscodecom-appbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=appcatalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i appcatalogappscodecom-appbinding-editor appscode/appcatalogappscodecom-appbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i appcatalogappscodecom-appbinding-editor appscode/appcatalogappscodecom-appbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/appk8sio-application-editor/Chart.yaml b/charts/appk8sio-application-editor/Chart.yaml index 21ec6e814c..e1e4aa3a37 100644 --- a/charts/appk8sio-application-editor/Chart.yaml +++ b/charts/appk8sio-application-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"app.k8s.io","version":"v1beta1","resource":"applications"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Application Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: appk8sio-application-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/appk8sio-application-editor/README.md b/charts/appk8sio-application-editor/README.md index bb6e35ac52..8a0de8e603 100644 --- a/charts/appk8sio-application-editor/README.md +++ b/charts/appk8sio-application-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/appk8sio-application-editor --version=v0.38.0 -$ helm upgrade -i appk8sio-application-editor appscode/appk8sio-application-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/appk8sio-application-editor --version=v0.39.0 +$ helm upgrade -i appk8sio-application-editor appscode/appk8sio-application-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Application Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `appk8sio-application-editor`: ```bash -$ helm upgrade -i appk8sio-application-editor appscode/appk8sio-application-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i appk8sio-application-editor appscode/appk8sio-application-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Application Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `appk8sio-applicati Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i appk8sio-application-editor appscode/appk8sio-application-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=app.k8s.io/v1beta1 +$ helm upgrade -i appk8sio-application-editor appscode/appk8sio-application-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=app.k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i appk8sio-application-editor appscode/appk8sio-application-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i appk8sio-application-editor appscode/appk8sio-application-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/apps-controllerrevision-editor/Chart.yaml b/charts/apps-controllerrevision-editor/Chart.yaml index c35365289c..5e4a7e1265 100644 --- a/charts/apps-controllerrevision-editor/Chart.yaml +++ b/charts/apps-controllerrevision-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apps","version":"v1","resource":"controllerrevisions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ControllerRevision Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apps-controllerrevision-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/apps-controllerrevision-editor/README.md b/charts/apps-controllerrevision-editor/README.md index ee9242ead6..99bf82aace 100644 --- a/charts/apps-controllerrevision-editor/README.md +++ b/charts/apps-controllerrevision-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apps-controllerrevision-editor --version=v0.38.0 -$ helm upgrade -i apps-controllerrevision-editor appscode/apps-controllerrevision-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/apps-controllerrevision-editor --version=v0.39.0 +$ helm upgrade -i apps-controllerrevision-editor appscode/apps-controllerrevision-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ControllerRevision Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `apps-controllerrevision-editor`: ```bash -$ helm upgrade -i apps-controllerrevision-editor appscode/apps-controllerrevision-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i apps-controllerrevision-editor appscode/apps-controllerrevision-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ControllerRevision Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apps-controllerrev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apps-controllerrevision-editor appscode/apps-controllerrevision-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=apps/v1 +$ helm upgrade -i apps-controllerrevision-editor appscode/apps-controllerrevision-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=apps/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apps-controllerrevision-editor appscode/apps-controllerrevision-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i apps-controllerrevision-editor appscode/apps-controllerrevision-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/apps-daemonset-editor/Chart.yaml b/charts/apps-daemonset-editor/Chart.yaml index 368bff9066..2a73557ab9 100644 --- a/charts/apps-daemonset-editor/Chart.yaml +++ b/charts/apps-daemonset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apps","version":"v1","resource":"daemonsets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DaemonSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apps-daemonset-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/apps-daemonset-editor/README.md b/charts/apps-daemonset-editor/README.md index cf194fc868..80fdc06861 100644 --- a/charts/apps-daemonset-editor/README.md +++ b/charts/apps-daemonset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apps-daemonset-editor --version=v0.38.0 -$ helm upgrade -i apps-daemonset-editor appscode/apps-daemonset-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/apps-daemonset-editor --version=v0.39.0 +$ helm upgrade -i apps-daemonset-editor appscode/apps-daemonset-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DaemonSet Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `apps-daemonset-editor`: ```bash -$ helm upgrade -i apps-daemonset-editor appscode/apps-daemonset-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i apps-daemonset-editor appscode/apps-daemonset-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DaemonSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apps-daemonset-edi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apps-daemonset-editor appscode/apps-daemonset-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=apps/v1 +$ helm upgrade -i apps-daemonset-editor appscode/apps-daemonset-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=apps/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apps-daemonset-editor appscode/apps-daemonset-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i apps-daemonset-editor appscode/apps-daemonset-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/apps-deployment-editor/Chart.yaml b/charts/apps-deployment-editor/Chart.yaml index 4a88c20090..6031a275a4 100644 --- a/charts/apps-deployment-editor/Chart.yaml +++ b/charts/apps-deployment-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apps","version":"v1","resource":"deployments"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Deployment Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apps-deployment-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/apps-deployment-editor/README.md b/charts/apps-deployment-editor/README.md index 8c9df49e58..33ca2c710b 100644 --- a/charts/apps-deployment-editor/README.md +++ b/charts/apps-deployment-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apps-deployment-editor --version=v0.38.0 -$ helm upgrade -i apps-deployment-editor appscode/apps-deployment-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/apps-deployment-editor --version=v0.39.0 +$ helm upgrade -i apps-deployment-editor appscode/apps-deployment-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Deployment Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `apps-deployment-editor`: ```bash -$ helm upgrade -i apps-deployment-editor appscode/apps-deployment-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i apps-deployment-editor appscode/apps-deployment-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Deployment Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apps-deployment-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apps-deployment-editor appscode/apps-deployment-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=apps/v1 +$ helm upgrade -i apps-deployment-editor appscode/apps-deployment-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=apps/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apps-deployment-editor appscode/apps-deployment-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i apps-deployment-editor appscode/apps-deployment-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/apps-replicaset-editor/Chart.yaml b/charts/apps-replicaset-editor/Chart.yaml index 7d784246c9..6b042a35bd 100644 --- a/charts/apps-replicaset-editor/Chart.yaml +++ b/charts/apps-replicaset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apps","version":"v1","resource":"replicasets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ReplicaSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apps-replicaset-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/apps-replicaset-editor/README.md b/charts/apps-replicaset-editor/README.md index 5ea6bb85e1..f7669b7eb1 100644 --- a/charts/apps-replicaset-editor/README.md +++ b/charts/apps-replicaset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apps-replicaset-editor --version=v0.38.0 -$ helm upgrade -i apps-replicaset-editor appscode/apps-replicaset-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/apps-replicaset-editor --version=v0.39.0 +$ helm upgrade -i apps-replicaset-editor appscode/apps-replicaset-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ReplicaSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `apps-replicaset-editor`: ```bash -$ helm upgrade -i apps-replicaset-editor appscode/apps-replicaset-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i apps-replicaset-editor appscode/apps-replicaset-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ReplicaSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apps-replicaset-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apps-replicaset-editor appscode/apps-replicaset-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=apps/v1 +$ helm upgrade -i apps-replicaset-editor appscode/apps-replicaset-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=apps/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apps-replicaset-editor appscode/apps-replicaset-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i apps-replicaset-editor appscode/apps-replicaset-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/apps-statefulset-editor/Chart.yaml b/charts/apps-statefulset-editor/Chart.yaml index f833dfaf1c..d2535570e7 100644 --- a/charts/apps-statefulset-editor/Chart.yaml +++ b/charts/apps-statefulset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apps","version":"v1","resource":"statefulsets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: StatefulSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apps-statefulset-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/apps-statefulset-editor/README.md b/charts/apps-statefulset-editor/README.md index 46d061b73d..40b30e8b3a 100644 --- a/charts/apps-statefulset-editor/README.md +++ b/charts/apps-statefulset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apps-statefulset-editor --version=v0.38.0 -$ helm upgrade -i apps-statefulset-editor appscode/apps-statefulset-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/apps-statefulset-editor --version=v0.39.0 +$ helm upgrade -i apps-statefulset-editor appscode/apps-statefulset-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a StatefulSet Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `apps-statefulset-editor`: ```bash -$ helm upgrade -i apps-statefulset-editor appscode/apps-statefulset-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i apps-statefulset-editor appscode/apps-statefulset-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a StatefulSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apps-statefulset-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apps-statefulset-editor appscode/apps-statefulset-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=apps/v1 +$ helm upgrade -i apps-statefulset-editor appscode/apps-statefulset-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=apps/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apps-statefulset-editor appscode/apps-statefulset-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i apps-statefulset-editor appscode/apps-statefulset-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/appsk8sappscodecom-petset-editor/Chart.yaml b/charts/appsk8sappscodecom-petset-editor/Chart.yaml index 3ce218051b..42a1133468 100644 --- a/charts/appsk8sappscodecom-petset-editor/Chart.yaml +++ b/charts/appsk8sappscodecom-petset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apps.k8s.appscode.com","version":"v1","resource":"petsets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PetSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: appsk8sappscodecom-petset-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/appsk8sappscodecom-petset-editor/README.md b/charts/appsk8sappscodecom-petset-editor/README.md index 073d525ad2..56d125083c 100644 --- a/charts/appsk8sappscodecom-petset-editor/README.md +++ b/charts/appsk8sappscodecom-petset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/appsk8sappscodecom-petset-editor --version=v0.38.0 -$ helm upgrade -i appsk8sappscodecom-petset-editor appscode/appsk8sappscodecom-petset-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/appsk8sappscodecom-petset-editor --version=v0.39.0 +$ helm upgrade -i appsk8sappscodecom-petset-editor appscode/appsk8sappscodecom-petset-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PetSet Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `appsk8sappscodecom-petset-editor`: ```bash -$ helm upgrade -i appsk8sappscodecom-petset-editor appscode/appsk8sappscodecom-petset-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i appsk8sappscodecom-petset-editor appscode/appsk8sappscodecom-petset-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PetSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `appsk8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i appsk8sappscodecom-petset-editor appscode/appsk8sappscodecom-petset-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=apps.k8s.appscode.com/v1 +$ helm upgrade -i appsk8sappscodecom-petset-editor appscode/appsk8sappscodecom-petset-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=apps.k8s.appscode.com/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i appsk8sappscodecom-petset-editor appscode/appsk8sappscodecom-petset-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i appsk8sappscodecom-petset-editor appscode/appsk8sappscodecom-petset-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/appsk8sappscodecom-placementpolicy-editor/Chart.yaml b/charts/appsk8sappscodecom-placementpolicy-editor/Chart.yaml index 512dd944fc..1b4c3bf713 100644 --- a/charts/appsk8sappscodecom-placementpolicy-editor/Chart.yaml +++ b/charts/appsk8sappscodecom-placementpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apps.k8s.appscode.com","version":"v1","resource":"placementpolicies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PlacementPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: appsk8sappscodecom-placementpolicy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/appsk8sappscodecom-placementpolicy-editor/README.md b/charts/appsk8sappscodecom-placementpolicy-editor/README.md index 9580c91263..f6caaf0582 100644 --- a/charts/appsk8sappscodecom-placementpolicy-editor/README.md +++ b/charts/appsk8sappscodecom-placementpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/appsk8sappscodecom-placementpolicy-editor --version=v0.38.0 -$ helm upgrade -i appsk8sappscodecom-placementpolicy-editor appscode/appsk8sappscodecom-placementpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/appsk8sappscodecom-placementpolicy-editor --version=v0.39.0 +$ helm upgrade -i appsk8sappscodecom-placementpolicy-editor appscode/appsk8sappscodecom-placementpolicy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PlacementPolicy Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `appsk8sappscodecom-placementpolicy-editor`: ```bash -$ helm upgrade -i appsk8sappscodecom-placementpolicy-editor appscode/appsk8sappscodecom-placementpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i appsk8sappscodecom-placementpolicy-editor appscode/appsk8sappscodecom-placementpolicy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PlacementPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `appsk8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i appsk8sappscodecom-placementpolicy-editor appscode/appsk8sappscodecom-placementpolicy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=apps.k8s.appscode.com/v1 +$ helm upgrade -i appsk8sappscodecom-placementpolicy-editor appscode/appsk8sappscodecom-placementpolicy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=apps.k8s.appscode.com/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i appsk8sappscodecom-placementpolicy-editor appscode/appsk8sappscodecom-placementpolicy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i appsk8sappscodecom-placementpolicy-editor appscode/appsk8sappscodecom-placementpolicy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/archiverkubedbcom-clickhousearchiver-editor/Chart.yaml b/charts/archiverkubedbcom-clickhousearchiver-editor/Chart.yaml index 8c0aac7d88..af0e583996 100644 --- a/charts/archiverkubedbcom-clickhousearchiver-editor/Chart.yaml +++ b/charts/archiverkubedbcom-clickhousearchiver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"archiver.kubedb.com","version":"v1alpha1","resource":"clickhousearchivers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClickHouseArchiver Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: archiverkubedbcom-clickhousearchiver-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/archiverkubedbcom-clickhousearchiver-editor/README.md b/charts/archiverkubedbcom-clickhousearchiver-editor/README.md index 4fad08bbda..9efc00cbef 100644 --- a/charts/archiverkubedbcom-clickhousearchiver-editor/README.md +++ b/charts/archiverkubedbcom-clickhousearchiver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/archiverkubedbcom-clickhousearchiver-editor --version=v0.38.0 -$ helm upgrade -i archiverkubedbcom-clickhousearchiver-editor appscode/archiverkubedbcom-clickhousearchiver-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/archiverkubedbcom-clickhousearchiver-editor --version=v0.39.0 +$ helm upgrade -i archiverkubedbcom-clickhousearchiver-editor appscode/archiverkubedbcom-clickhousearchiver-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClickHouseArchiver Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `archiverkubedbcom-clickhousearchiver-editor`: ```bash -$ helm upgrade -i archiverkubedbcom-clickhousearchiver-editor appscode/archiverkubedbcom-clickhousearchiver-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i archiverkubedbcom-clickhousearchiver-editor appscode/archiverkubedbcom-clickhousearchiver-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClickHouseArchiver Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `archiverkubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i archiverkubedbcom-clickhousearchiver-editor appscode/archiverkubedbcom-clickhousearchiver-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=archiver.kubedb.com/v1alpha1 +$ helm upgrade -i archiverkubedbcom-clickhousearchiver-editor appscode/archiverkubedbcom-clickhousearchiver-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=archiver.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i archiverkubedbcom-clickhousearchiver-editor appscode/archiverkubedbcom-clickhousearchiver-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i archiverkubedbcom-clickhousearchiver-editor appscode/archiverkubedbcom-clickhousearchiver-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/archiverkubedbcom-mariadbarchiver-editor/Chart.yaml b/charts/archiverkubedbcom-mariadbarchiver-editor/Chart.yaml index ed654ce901..1f314d5f62 100644 --- a/charts/archiverkubedbcom-mariadbarchiver-editor/Chart.yaml +++ b/charts/archiverkubedbcom-mariadbarchiver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"archiver.kubedb.com","version":"v1alpha1","resource":"mariadbarchivers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MariaDBArchiver Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: archiverkubedbcom-mariadbarchiver-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/archiverkubedbcom-mariadbarchiver-editor/README.md b/charts/archiverkubedbcom-mariadbarchiver-editor/README.md index 0155e39c91..ef28e04552 100644 --- a/charts/archiverkubedbcom-mariadbarchiver-editor/README.md +++ b/charts/archiverkubedbcom-mariadbarchiver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/archiverkubedbcom-mariadbarchiver-editor --version=v0.38.0 -$ helm upgrade -i archiverkubedbcom-mariadbarchiver-editor appscode/archiverkubedbcom-mariadbarchiver-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/archiverkubedbcom-mariadbarchiver-editor --version=v0.39.0 +$ helm upgrade -i archiverkubedbcom-mariadbarchiver-editor appscode/archiverkubedbcom-mariadbarchiver-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBArchiver Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `archiverkubedbcom-mariadbarchiver-editor`: ```bash -$ helm upgrade -i archiverkubedbcom-mariadbarchiver-editor appscode/archiverkubedbcom-mariadbarchiver-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i archiverkubedbcom-mariadbarchiver-editor appscode/archiverkubedbcom-mariadbarchiver-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MariaDBArchiver Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `archiverkubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i archiverkubedbcom-mariadbarchiver-editor appscode/archiverkubedbcom-mariadbarchiver-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=archiver.kubedb.com/v1alpha1 +$ helm upgrade -i archiverkubedbcom-mariadbarchiver-editor appscode/archiverkubedbcom-mariadbarchiver-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=archiver.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i archiverkubedbcom-mariadbarchiver-editor appscode/archiverkubedbcom-mariadbarchiver-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i archiverkubedbcom-mariadbarchiver-editor appscode/archiverkubedbcom-mariadbarchiver-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/archiverkubedbcom-mongodbarchiver-editor/Chart.yaml b/charts/archiverkubedbcom-mongodbarchiver-editor/Chart.yaml index ff3c66d78e..e55e480926 100644 --- a/charts/archiverkubedbcom-mongodbarchiver-editor/Chart.yaml +++ b/charts/archiverkubedbcom-mongodbarchiver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"archiver.kubedb.com","version":"v1alpha1","resource":"mongodbarchivers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MongoDBArchiver Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: archiverkubedbcom-mongodbarchiver-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/archiverkubedbcom-mongodbarchiver-editor/README.md b/charts/archiverkubedbcom-mongodbarchiver-editor/README.md index 92e4c3db5f..4cdbbb7e80 100644 --- a/charts/archiverkubedbcom-mongodbarchiver-editor/README.md +++ b/charts/archiverkubedbcom-mongodbarchiver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/archiverkubedbcom-mongodbarchiver-editor --version=v0.38.0 -$ helm upgrade -i archiverkubedbcom-mongodbarchiver-editor appscode/archiverkubedbcom-mongodbarchiver-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/archiverkubedbcom-mongodbarchiver-editor --version=v0.39.0 +$ helm upgrade -i archiverkubedbcom-mongodbarchiver-editor appscode/archiverkubedbcom-mongodbarchiver-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBArchiver Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `archiverkubedbcom-mongodbarchiver-editor`: ```bash -$ helm upgrade -i archiverkubedbcom-mongodbarchiver-editor appscode/archiverkubedbcom-mongodbarchiver-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i archiverkubedbcom-mongodbarchiver-editor appscode/archiverkubedbcom-mongodbarchiver-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MongoDBArchiver Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `archiverkubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i archiverkubedbcom-mongodbarchiver-editor appscode/archiverkubedbcom-mongodbarchiver-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=archiver.kubedb.com/v1alpha1 +$ helm upgrade -i archiverkubedbcom-mongodbarchiver-editor appscode/archiverkubedbcom-mongodbarchiver-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=archiver.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i archiverkubedbcom-mongodbarchiver-editor appscode/archiverkubedbcom-mongodbarchiver-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i archiverkubedbcom-mongodbarchiver-editor appscode/archiverkubedbcom-mongodbarchiver-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/archiverkubedbcom-mssqlserverarchiver-editor/Chart.yaml b/charts/archiverkubedbcom-mssqlserverarchiver-editor/Chart.yaml index 5a25e3f1df..2f2e9a68fb 100644 --- a/charts/archiverkubedbcom-mssqlserverarchiver-editor/Chart.yaml +++ b/charts/archiverkubedbcom-mssqlserverarchiver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"archiver.kubedb.com","version":"v1alpha1","resource":"mssqlserverarchivers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLServerArchiver Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: archiverkubedbcom-mssqlserverarchiver-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/archiverkubedbcom-mssqlserverarchiver-editor/README.md b/charts/archiverkubedbcom-mssqlserverarchiver-editor/README.md index a26018b4b2..941e183d6d 100644 --- a/charts/archiverkubedbcom-mssqlserverarchiver-editor/README.md +++ b/charts/archiverkubedbcom-mssqlserverarchiver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/archiverkubedbcom-mssqlserverarchiver-editor --version=v0.38.0 -$ helm upgrade -i archiverkubedbcom-mssqlserverarchiver-editor appscode/archiverkubedbcom-mssqlserverarchiver-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/archiverkubedbcom-mssqlserverarchiver-editor --version=v0.39.0 +$ helm upgrade -i archiverkubedbcom-mssqlserverarchiver-editor appscode/archiverkubedbcom-mssqlserverarchiver-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerArchiver Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `archiverkubedbcom-mssqlserverarchiver-editor`: ```bash -$ helm upgrade -i archiverkubedbcom-mssqlserverarchiver-editor appscode/archiverkubedbcom-mssqlserverarchiver-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i archiverkubedbcom-mssqlserverarchiver-editor appscode/archiverkubedbcom-mssqlserverarchiver-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLServerArchiver Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `archiverkubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i archiverkubedbcom-mssqlserverarchiver-editor appscode/archiverkubedbcom-mssqlserverarchiver-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=archiver.kubedb.com/v1alpha1 +$ helm upgrade -i archiverkubedbcom-mssqlserverarchiver-editor appscode/archiverkubedbcom-mssqlserverarchiver-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=archiver.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i archiverkubedbcom-mssqlserverarchiver-editor appscode/archiverkubedbcom-mssqlserverarchiver-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i archiverkubedbcom-mssqlserverarchiver-editor appscode/archiverkubedbcom-mssqlserverarchiver-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/archiverkubedbcom-mysqlarchiver-editor/Chart.yaml b/charts/archiverkubedbcom-mysqlarchiver-editor/Chart.yaml index a5ea2adace..e1f4931bce 100644 --- a/charts/archiverkubedbcom-mysqlarchiver-editor/Chart.yaml +++ b/charts/archiverkubedbcom-mysqlarchiver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"archiver.kubedb.com","version":"v1alpha1","resource":"mysqlarchivers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MySQLArchiver Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: archiverkubedbcom-mysqlarchiver-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/archiverkubedbcom-mysqlarchiver-editor/README.md b/charts/archiverkubedbcom-mysqlarchiver-editor/README.md index 2e16259925..617cfd2701 100644 --- a/charts/archiverkubedbcom-mysqlarchiver-editor/README.md +++ b/charts/archiverkubedbcom-mysqlarchiver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/archiverkubedbcom-mysqlarchiver-editor --version=v0.38.0 -$ helm upgrade -i archiverkubedbcom-mysqlarchiver-editor appscode/archiverkubedbcom-mysqlarchiver-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/archiverkubedbcom-mysqlarchiver-editor --version=v0.39.0 +$ helm upgrade -i archiverkubedbcom-mysqlarchiver-editor appscode/archiverkubedbcom-mysqlarchiver-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLArchiver Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `archiverkubedbcom-mysqlarchiver-editor`: ```bash -$ helm upgrade -i archiverkubedbcom-mysqlarchiver-editor appscode/archiverkubedbcom-mysqlarchiver-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i archiverkubedbcom-mysqlarchiver-editor appscode/archiverkubedbcom-mysqlarchiver-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MySQLArchiver Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `archiverkubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i archiverkubedbcom-mysqlarchiver-editor appscode/archiverkubedbcom-mysqlarchiver-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=archiver.kubedb.com/v1alpha1 +$ helm upgrade -i archiverkubedbcom-mysqlarchiver-editor appscode/archiverkubedbcom-mysqlarchiver-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=archiver.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i archiverkubedbcom-mysqlarchiver-editor appscode/archiverkubedbcom-mysqlarchiver-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i archiverkubedbcom-mysqlarchiver-editor appscode/archiverkubedbcom-mysqlarchiver-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/archiverkubedbcom-postgresarchiver-editor/Chart.yaml b/charts/archiverkubedbcom-postgresarchiver-editor/Chart.yaml index c87cf3fb49..231d0d7f5e 100644 --- a/charts/archiverkubedbcom-postgresarchiver-editor/Chart.yaml +++ b/charts/archiverkubedbcom-postgresarchiver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"archiver.kubedb.com","version":"v1alpha1","resource":"postgresarchivers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PostgresArchiver Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: archiverkubedbcom-postgresarchiver-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/archiverkubedbcom-postgresarchiver-editor/README.md b/charts/archiverkubedbcom-postgresarchiver-editor/README.md index 0022a1c76f..0a45cce265 100644 --- a/charts/archiverkubedbcom-postgresarchiver-editor/README.md +++ b/charts/archiverkubedbcom-postgresarchiver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/archiverkubedbcom-postgresarchiver-editor --version=v0.38.0 -$ helm upgrade -i archiverkubedbcom-postgresarchiver-editor appscode/archiverkubedbcom-postgresarchiver-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/archiverkubedbcom-postgresarchiver-editor --version=v0.39.0 +$ helm upgrade -i archiverkubedbcom-postgresarchiver-editor appscode/archiverkubedbcom-postgresarchiver-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresArchiver Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `archiverkubedbcom-postgresarchiver-editor`: ```bash -$ helm upgrade -i archiverkubedbcom-postgresarchiver-editor appscode/archiverkubedbcom-postgresarchiver-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i archiverkubedbcom-postgresarchiver-editor appscode/archiverkubedbcom-postgresarchiver-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PostgresArchiver Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `archiverkubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i archiverkubedbcom-postgresarchiver-editor appscode/archiverkubedbcom-postgresarchiver-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=archiver.kubedb.com/v1alpha1 +$ helm upgrade -i archiverkubedbcom-postgresarchiver-editor appscode/archiverkubedbcom-postgresarchiver-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=archiver.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i archiverkubedbcom-postgresarchiver-editor appscode/archiverkubedbcom-postgresarchiver-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i archiverkubedbcom-postgresarchiver-editor appscode/archiverkubedbcom-postgresarchiver-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/auditorappscodecom-siteinfo-editor/Chart.yaml b/charts/auditorappscodecom-siteinfo-editor/Chart.yaml index a7e591e149..92e0bd7aee 100644 --- a/charts/auditorappscodecom-siteinfo-editor/Chart.yaml +++ b/charts/auditorappscodecom-siteinfo-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"auditor.appscode.com","version":"v1alpha1","resource":"siteinfos"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SiteInfo Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: auditorappscodecom-siteinfo-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/auditorappscodecom-siteinfo-editor/README.md b/charts/auditorappscodecom-siteinfo-editor/README.md index 1b32b4b766..2820a8fca7 100644 --- a/charts/auditorappscodecom-siteinfo-editor/README.md +++ b/charts/auditorappscodecom-siteinfo-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/auditorappscodecom-siteinfo-editor --version=v0.38.0 -$ helm upgrade -i auditorappscodecom-siteinfo-editor appscode/auditorappscodecom-siteinfo-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/auditorappscodecom-siteinfo-editor --version=v0.39.0 +$ helm upgrade -i auditorappscodecom-siteinfo-editor appscode/auditorappscodecom-siteinfo-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SiteInfo Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `auditorappscodecom-siteinfo-editor`: ```bash -$ helm upgrade -i auditorappscodecom-siteinfo-editor appscode/auditorappscodecom-siteinfo-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i auditorappscodecom-siteinfo-editor appscode/auditorappscodecom-siteinfo-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SiteInfo Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `auditorappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i auditorappscodecom-siteinfo-editor appscode/auditorappscodecom-siteinfo-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=auditor.appscode.com/v1alpha1 +$ helm upgrade -i auditorappscodecom-siteinfo-editor appscode/auditorappscodecom-siteinfo-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=auditor.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i auditorappscodecom-siteinfo-editor appscode/auditorappscodecom-siteinfo-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i auditorappscodecom-siteinfo-editor appscode/auditorappscodecom-siteinfo-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/auditregistrationk8sio-auditsink-editor/Chart.yaml b/charts/auditregistrationk8sio-auditsink-editor/Chart.yaml index de493c64b0..2a6207785a 100644 --- a/charts/auditregistrationk8sio-auditsink-editor/Chart.yaml +++ b/charts/auditregistrationk8sio-auditsink-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"auditregistration.k8s.io","version":"v1alpha1","resource":"auditsinks"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AuditSink Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: auditregistrationk8sio-auditsink-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/auditregistrationk8sio-auditsink-editor/README.md b/charts/auditregistrationk8sio-auditsink-editor/README.md index d1d29dc503..5de64441d1 100644 --- a/charts/auditregistrationk8sio-auditsink-editor/README.md +++ b/charts/auditregistrationk8sio-auditsink-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/auditregistrationk8sio-auditsink-editor --version=v0.38.0 -$ helm upgrade -i auditregistrationk8sio-auditsink-editor appscode/auditregistrationk8sio-auditsink-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/auditregistrationk8sio-auditsink-editor --version=v0.39.0 +$ helm upgrade -i auditregistrationk8sio-auditsink-editor appscode/auditregistrationk8sio-auditsink-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AuditSink Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `auditregistrationk8sio-auditsink-editor`: ```bash -$ helm upgrade -i auditregistrationk8sio-auditsink-editor appscode/auditregistrationk8sio-auditsink-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i auditregistrationk8sio-auditsink-editor appscode/auditregistrationk8sio-auditsink-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AuditSink Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `auditregistrationk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i auditregistrationk8sio-auditsink-editor appscode/auditregistrationk8sio-auditsink-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=auditregistration.k8s.io/v1alpha1 +$ helm upgrade -i auditregistrationk8sio-auditsink-editor appscode/auditregistrationk8sio-auditsink-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=auditregistration.k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i auditregistrationk8sio-auditsink-editor appscode/auditregistrationk8sio-auditsink-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i auditregistrationk8sio-auditsink-editor appscode/auditregistrationk8sio-auditsink-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/authenticationk8sappscodecom-account-editor/Chart.yaml b/charts/authenticationk8sappscodecom-account-editor/Chart.yaml index e7679086b1..56264b1437 100644 --- a/charts/authenticationk8sappscodecom-account-editor/Chart.yaml +++ b/charts/authenticationk8sappscodecom-account-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authentication.k8s.appscode.com","version":"v1alpha1","resource":"accounts"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Account Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authenticationk8sappscodecom-account-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/authenticationk8sappscodecom-account-editor/README.md b/charts/authenticationk8sappscodecom-account-editor/README.md index 7172b4db89..b27a04426b 100644 --- a/charts/authenticationk8sappscodecom-account-editor/README.md +++ b/charts/authenticationk8sappscodecom-account-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authenticationk8sappscodecom-account-editor --version=v0.38.0 -$ helm upgrade -i authenticationk8sappscodecom-account-editor appscode/authenticationk8sappscodecom-account-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/authenticationk8sappscodecom-account-editor --version=v0.39.0 +$ helm upgrade -i authenticationk8sappscodecom-account-editor appscode/authenticationk8sappscodecom-account-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Account Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `authenticationk8sappscodecom-account-editor`: ```bash -$ helm upgrade -i authenticationk8sappscodecom-account-editor appscode/authenticationk8sappscodecom-account-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i authenticationk8sappscodecom-account-editor appscode/authenticationk8sappscodecom-account-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Account Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authenticationk8sa Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authenticationk8sappscodecom-account-editor appscode/authenticationk8sappscodecom-account-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=authentication.k8s.appscode.com/v1alpha1 +$ helm upgrade -i authenticationk8sappscodecom-account-editor appscode/authenticationk8sappscodecom-account-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=authentication.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authenticationk8sappscodecom-account-editor appscode/authenticationk8sappscodecom-account-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i authenticationk8sappscodecom-account-editor appscode/authenticationk8sappscodecom-account-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/authenticationk8sappscodecom-user-editor/Chart.yaml b/charts/authenticationk8sappscodecom-user-editor/Chart.yaml index efdb788613..d8f73c9ec8 100644 --- a/charts/authenticationk8sappscodecom-user-editor/Chart.yaml +++ b/charts/authenticationk8sappscodecom-user-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authentication.k8s.appscode.com","version":"v1alpha1","resource":"users"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: User Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authenticationk8sappscodecom-user-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/authenticationk8sappscodecom-user-editor/README.md b/charts/authenticationk8sappscodecom-user-editor/README.md index 4458af0552..93ef3c51ef 100644 --- a/charts/authenticationk8sappscodecom-user-editor/README.md +++ b/charts/authenticationk8sappscodecom-user-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authenticationk8sappscodecom-user-editor --version=v0.38.0 -$ helm upgrade -i authenticationk8sappscodecom-user-editor appscode/authenticationk8sappscodecom-user-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/authenticationk8sappscodecom-user-editor --version=v0.39.0 +$ helm upgrade -i authenticationk8sappscodecom-user-editor appscode/authenticationk8sappscodecom-user-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a User Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `authenticationk8sappscodecom-user-editor`: ```bash -$ helm upgrade -i authenticationk8sappscodecom-user-editor appscode/authenticationk8sappscodecom-user-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i authenticationk8sappscodecom-user-editor appscode/authenticationk8sappscodecom-user-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a User Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authenticationk8sa Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authenticationk8sappscodecom-user-editor appscode/authenticationk8sappscodecom-user-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=authentication.k8s.appscode.com/v1alpha1 +$ helm upgrade -i authenticationk8sappscodecom-user-editor appscode/authenticationk8sappscodecom-user-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=authentication.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authenticationk8sappscodecom-user-editor appscode/authenticationk8sappscodecom-user-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i authenticationk8sappscodecom-user-editor appscode/authenticationk8sappscodecom-user-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/authenticationk8sio-tokenrequest-editor/Chart.yaml b/charts/authenticationk8sio-tokenrequest-editor/Chart.yaml index de509b00b0..6372ffe44f 100644 --- a/charts/authenticationk8sio-tokenrequest-editor/Chart.yaml +++ b/charts/authenticationk8sio-tokenrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authentication.k8s.io","version":"v1","resource":"tokenrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: TokenRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authenticationk8sio-tokenrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/authenticationk8sio-tokenrequest-editor/README.md b/charts/authenticationk8sio-tokenrequest-editor/README.md index 545fa47e4c..73376dc3cf 100644 --- a/charts/authenticationk8sio-tokenrequest-editor/README.md +++ b/charts/authenticationk8sio-tokenrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authenticationk8sio-tokenrequest-editor --version=v0.38.0 -$ helm upgrade -i authenticationk8sio-tokenrequest-editor appscode/authenticationk8sio-tokenrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/authenticationk8sio-tokenrequest-editor --version=v0.39.0 +$ helm upgrade -i authenticationk8sio-tokenrequest-editor appscode/authenticationk8sio-tokenrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a TokenRequest Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `authenticationk8sio-tokenrequest-editor`: ```bash -$ helm upgrade -i authenticationk8sio-tokenrequest-editor appscode/authenticationk8sio-tokenrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i authenticationk8sio-tokenrequest-editor appscode/authenticationk8sio-tokenrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a TokenRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authenticationk8si Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authenticationk8sio-tokenrequest-editor appscode/authenticationk8sio-tokenrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=authentication.k8s.io/v1 +$ helm upgrade -i authenticationk8sio-tokenrequest-editor appscode/authenticationk8sio-tokenrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=authentication.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authenticationk8sio-tokenrequest-editor appscode/authenticationk8sio-tokenrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i authenticationk8sio-tokenrequest-editor appscode/authenticationk8sio-tokenrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/authenticationk8sio-tokenreview-editor/Chart.yaml b/charts/authenticationk8sio-tokenreview-editor/Chart.yaml index f75d3d7532..a4756da326 100644 --- a/charts/authenticationk8sio-tokenreview-editor/Chart.yaml +++ b/charts/authenticationk8sio-tokenreview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authentication.k8s.io","version":"v1","resource":"tokenreviews"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: TokenReview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authenticationk8sio-tokenreview-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/authenticationk8sio-tokenreview-editor/README.md b/charts/authenticationk8sio-tokenreview-editor/README.md index bf6fb142f4..ee3f3fed7c 100644 --- a/charts/authenticationk8sio-tokenreview-editor/README.md +++ b/charts/authenticationk8sio-tokenreview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authenticationk8sio-tokenreview-editor --version=v0.38.0 -$ helm upgrade -i authenticationk8sio-tokenreview-editor appscode/authenticationk8sio-tokenreview-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/authenticationk8sio-tokenreview-editor --version=v0.39.0 +$ helm upgrade -i authenticationk8sio-tokenreview-editor appscode/authenticationk8sio-tokenreview-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a TokenReview Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `authenticationk8sio-tokenreview-editor`: ```bash -$ helm upgrade -i authenticationk8sio-tokenreview-editor appscode/authenticationk8sio-tokenreview-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i authenticationk8sio-tokenreview-editor appscode/authenticationk8sio-tokenreview-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a TokenReview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authenticationk8si Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authenticationk8sio-tokenreview-editor appscode/authenticationk8sio-tokenreview-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=authentication.k8s.io/v1 +$ helm upgrade -i authenticationk8sio-tokenreview-editor appscode/authenticationk8sio-tokenreview-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=authentication.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authenticationk8sio-tokenreview-editor appscode/authenticationk8sio-tokenreview-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i authenticationk8sio-tokenreview-editor appscode/authenticationk8sio-tokenreview-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/authenticationopenclustermanagementio-managedserviceaccount-editor/Chart.yaml b/charts/authenticationopenclustermanagementio-managedserviceaccount-editor/Chart.yaml index 0c2b1a7244..b2a3e72ae6 100644 --- a/charts/authenticationopenclustermanagementio-managedserviceaccount-editor/Chart.yaml +++ b/charts/authenticationopenclustermanagementio-managedserviceaccount-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authentication.open-cluster-management.io","version":"v1beta1","resource":"managedserviceaccounts"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ManagedServiceAccount Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authenticationopenclustermanagementio-managedserviceaccount-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/authenticationopenclustermanagementio-managedserviceaccount-editor/README.md b/charts/authenticationopenclustermanagementio-managedserviceaccount-editor/README.md index da5d3e322a..24f6cb9fc6 100644 --- a/charts/authenticationopenclustermanagementio-managedserviceaccount-editor/README.md +++ b/charts/authenticationopenclustermanagementio-managedserviceaccount-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authenticationopenclustermanagementio-managedserviceaccount-editor --version=v0.38.0 -$ helm upgrade -i authenticationopenclustermanagementio-managedserviceaccount-editor appscode/authenticationopenclustermanagementio-managedserviceaccount-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/authenticationopenclustermanagementio-managedserviceaccount-editor --version=v0.39.0 +$ helm upgrade -i authenticationopenclustermanagementio-managedserviceaccount-editor appscode/authenticationopenclustermanagementio-managedserviceaccount-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManagedServiceAccount Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `authenticationopenclustermanagementio-managedserviceaccount-editor`: ```bash -$ helm upgrade -i authenticationopenclustermanagementio-managedserviceaccount-editor appscode/authenticationopenclustermanagementio-managedserviceaccount-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i authenticationopenclustermanagementio-managedserviceaccount-editor appscode/authenticationopenclustermanagementio-managedserviceaccount-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ManagedServiceAccount Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authenticationopen Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authenticationopenclustermanagementio-managedserviceaccount-editor appscode/authenticationopenclustermanagementio-managedserviceaccount-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=authentication.open-cluster-management.io/v1beta1 +$ helm upgrade -i authenticationopenclustermanagementio-managedserviceaccount-editor appscode/authenticationopenclustermanagementio-managedserviceaccount-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=authentication.open-cluster-management.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authenticationopenclustermanagementio-managedserviceaccount-editor appscode/authenticationopenclustermanagementio-managedserviceaccount-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i authenticationopenclustermanagementio-managedserviceaccount-editor appscode/authenticationopenclustermanagementio-managedserviceaccount-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/authorizationazurekubedbcom-roleassignment-editor/Chart.yaml b/charts/authorizationazurekubedbcom-roleassignment-editor/Chart.yaml index 307c689174..7af1e84e9d 100644 --- a/charts/authorizationazurekubedbcom-roleassignment-editor/Chart.yaml +++ b/charts/authorizationazurekubedbcom-roleassignment-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authorization.azure.kubedb.com","version":"v1alpha1","resource":"roleassignments"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RoleAssignment Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authorizationazurekubedbcom-roleassignment-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/authorizationazurekubedbcom-roleassignment-editor/README.md b/charts/authorizationazurekubedbcom-roleassignment-editor/README.md index d2cd4f1c19..0658bd7700 100644 --- a/charts/authorizationazurekubedbcom-roleassignment-editor/README.md +++ b/charts/authorizationazurekubedbcom-roleassignment-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authorizationazurekubedbcom-roleassignment-editor --version=v0.38.0 -$ helm upgrade -i authorizationazurekubedbcom-roleassignment-editor appscode/authorizationazurekubedbcom-roleassignment-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/authorizationazurekubedbcom-roleassignment-editor --version=v0.39.0 +$ helm upgrade -i authorizationazurekubedbcom-roleassignment-editor appscode/authorizationazurekubedbcom-roleassignment-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RoleAssignment Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `authorizationazurekubedbcom-roleassignment-editor`: ```bash -$ helm upgrade -i authorizationazurekubedbcom-roleassignment-editor appscode/authorizationazurekubedbcom-roleassignment-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i authorizationazurekubedbcom-roleassignment-editor appscode/authorizationazurekubedbcom-roleassignment-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RoleAssignment Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authorizationazure Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authorizationazurekubedbcom-roleassignment-editor appscode/authorizationazurekubedbcom-roleassignment-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=authorization.azure.kubedb.com/v1alpha1 +$ helm upgrade -i authorizationazurekubedbcom-roleassignment-editor appscode/authorizationazurekubedbcom-roleassignment-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=authorization.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authorizationazurekubedbcom-roleassignment-editor appscode/authorizationazurekubedbcom-roleassignment-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i authorizationazurekubedbcom-roleassignment-editor appscode/authorizationazurekubedbcom-roleassignment-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/authorizationk8sappscodecom-managedclusterrole-editor/Chart.yaml b/charts/authorizationk8sappscodecom-managedclusterrole-editor/Chart.yaml index de01ae6e0f..eee47ef681 100644 --- a/charts/authorizationk8sappscodecom-managedclusterrole-editor/Chart.yaml +++ b/charts/authorizationk8sappscodecom-managedclusterrole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authorization.k8s.appscode.com","version":"v1alpha1","resource":"managedclusterroles"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ManagedClusterRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authorizationk8sappscodecom-managedclusterrole-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/authorizationk8sappscodecom-managedclusterrole-editor/README.md b/charts/authorizationk8sappscodecom-managedclusterrole-editor/README.md index 0d7ecb6337..681fb29fd3 100644 --- a/charts/authorizationk8sappscodecom-managedclusterrole-editor/README.md +++ b/charts/authorizationk8sappscodecom-managedclusterrole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authorizationk8sappscodecom-managedclusterrole-editor --version=v0.38.0 -$ helm upgrade -i authorizationk8sappscodecom-managedclusterrole-editor appscode/authorizationk8sappscodecom-managedclusterrole-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/authorizationk8sappscodecom-managedclusterrole-editor --version=v0.39.0 +$ helm upgrade -i authorizationk8sappscodecom-managedclusterrole-editor appscode/authorizationk8sappscodecom-managedclusterrole-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManagedClusterRole Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `authorizationk8sappscodecom-managedclusterrole-editor`: ```bash -$ helm upgrade -i authorizationk8sappscodecom-managedclusterrole-editor appscode/authorizationk8sappscodecom-managedclusterrole-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i authorizationk8sappscodecom-managedclusterrole-editor appscode/authorizationk8sappscodecom-managedclusterrole-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ManagedClusterRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authorizationk8sap Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authorizationk8sappscodecom-managedclusterrole-editor appscode/authorizationk8sappscodecom-managedclusterrole-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=authorization.k8s.appscode.com/v1alpha1 +$ helm upgrade -i authorizationk8sappscodecom-managedclusterrole-editor appscode/authorizationk8sappscodecom-managedclusterrole-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=authorization.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authorizationk8sappscodecom-managedclusterrole-editor appscode/authorizationk8sappscodecom-managedclusterrole-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i authorizationk8sappscodecom-managedclusterrole-editor appscode/authorizationk8sappscodecom-managedclusterrole-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/authorizationk8sappscodecom-managedclusterrolebinding-editor/Chart.yaml b/charts/authorizationk8sappscodecom-managedclusterrolebinding-editor/Chart.yaml index eedce436e5..6cc8099960 100644 --- a/charts/authorizationk8sappscodecom-managedclusterrolebinding-editor/Chart.yaml +++ b/charts/authorizationk8sappscodecom-managedclusterrolebinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authorization.k8s.appscode.com","version":"v1alpha1","resource":"managedclusterrolebindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ManagedClusterRoleBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authorizationk8sappscodecom-managedclusterrolebinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/authorizationk8sappscodecom-managedclusterrolebinding-editor/README.md b/charts/authorizationk8sappscodecom-managedclusterrolebinding-editor/README.md index d4ae14de2a..d7b004b9f5 100644 --- a/charts/authorizationk8sappscodecom-managedclusterrolebinding-editor/README.md +++ b/charts/authorizationk8sappscodecom-managedclusterrolebinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authorizationk8sappscodecom-managedclusterrolebinding-editor --version=v0.38.0 -$ helm upgrade -i authorizationk8sappscodecom-managedclusterrolebinding-editor appscode/authorizationk8sappscodecom-managedclusterrolebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/authorizationk8sappscodecom-managedclusterrolebinding-editor --version=v0.39.0 +$ helm upgrade -i authorizationk8sappscodecom-managedclusterrolebinding-editor appscode/authorizationk8sappscodecom-managedclusterrolebinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManagedClusterRoleBinding Editor on a [Kubernetes](http://k To install/upgrade the chart with the release name `authorizationk8sappscodecom-managedclusterrolebinding-editor`: ```bash -$ helm upgrade -i authorizationk8sappscodecom-managedclusterrolebinding-editor appscode/authorizationk8sappscodecom-managedclusterrolebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i authorizationk8sappscodecom-managedclusterrolebinding-editor appscode/authorizationk8sappscodecom-managedclusterrolebinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ManagedClusterRoleBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authorizationk8sap Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authorizationk8sappscodecom-managedclusterrolebinding-editor appscode/authorizationk8sappscodecom-managedclusterrolebinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=authorization.k8s.appscode.com/v1alpha1 +$ helm upgrade -i authorizationk8sappscodecom-managedclusterrolebinding-editor appscode/authorizationk8sappscodecom-managedclusterrolebinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=authorization.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authorizationk8sappscodecom-managedclusterrolebinding-editor appscode/authorizationk8sappscodecom-managedclusterrolebinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i authorizationk8sappscodecom-managedclusterrolebinding-editor appscode/authorizationk8sappscodecom-managedclusterrolebinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/authorizationk8sappscodecom-managedclustersetrolebinding-editor/Chart.yaml b/charts/authorizationk8sappscodecom-managedclustersetrolebinding-editor/Chart.yaml index 1db5defc31..6b4f630905 100644 --- a/charts/authorizationk8sappscodecom-managedclustersetrolebinding-editor/Chart.yaml +++ b/charts/authorizationk8sappscodecom-managedclustersetrolebinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authorization.k8s.appscode.com","version":"v1alpha1","resource":"managedclustersetrolebindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ManagedClusterSetRoleBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authorizationk8sappscodecom-managedclustersetrolebinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/authorizationk8sappscodecom-managedclustersetrolebinding-editor/README.md b/charts/authorizationk8sappscodecom-managedclustersetrolebinding-editor/README.md index af17026498..032dbb8fdc 100644 --- a/charts/authorizationk8sappscodecom-managedclustersetrolebinding-editor/README.md +++ b/charts/authorizationk8sappscodecom-managedclustersetrolebinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authorizationk8sappscodecom-managedclustersetrolebinding-editor --version=v0.38.0 -$ helm upgrade -i authorizationk8sappscodecom-managedclustersetrolebinding-editor appscode/authorizationk8sappscodecom-managedclustersetrolebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/authorizationk8sappscodecom-managedclustersetrolebinding-editor --version=v0.39.0 +$ helm upgrade -i authorizationk8sappscodecom-managedclustersetrolebinding-editor appscode/authorizationk8sappscodecom-managedclustersetrolebinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManagedClusterSetRoleBinding Editor on a [Kubernetes](http: To install/upgrade the chart with the release name `authorizationk8sappscodecom-managedclustersetrolebinding-editor`: ```bash -$ helm upgrade -i authorizationk8sappscodecom-managedclustersetrolebinding-editor appscode/authorizationk8sappscodecom-managedclustersetrolebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i authorizationk8sappscodecom-managedclustersetrolebinding-editor appscode/authorizationk8sappscodecom-managedclustersetrolebinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ManagedClusterSetRoleBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authorizationk8sap Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authorizationk8sappscodecom-managedclustersetrolebinding-editor appscode/authorizationk8sappscodecom-managedclustersetrolebinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=authorization.k8s.appscode.com/v1alpha1 +$ helm upgrade -i authorizationk8sappscodecom-managedclustersetrolebinding-editor appscode/authorizationk8sappscodecom-managedclustersetrolebinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=authorization.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authorizationk8sappscodecom-managedclustersetrolebinding-editor appscode/authorizationk8sappscodecom-managedclustersetrolebinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i authorizationk8sappscodecom-managedclustersetrolebinding-editor appscode/authorizationk8sappscodecom-managedclustersetrolebinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/authorizationk8sio-localsubjectaccessreview-editor/Chart.yaml b/charts/authorizationk8sio-localsubjectaccessreview-editor/Chart.yaml index fdf64ea5ae..d717cb442a 100644 --- a/charts/authorizationk8sio-localsubjectaccessreview-editor/Chart.yaml +++ b/charts/authorizationk8sio-localsubjectaccessreview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authorization.k8s.io","version":"v1","resource":"localsubjectaccessreviews"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: LocalSubjectAccessReview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authorizationk8sio-localsubjectaccessreview-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/authorizationk8sio-localsubjectaccessreview-editor/README.md b/charts/authorizationk8sio-localsubjectaccessreview-editor/README.md index 6511ccb1e9..dd51098d99 100644 --- a/charts/authorizationk8sio-localsubjectaccessreview-editor/README.md +++ b/charts/authorizationk8sio-localsubjectaccessreview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authorizationk8sio-localsubjectaccessreview-editor --version=v0.38.0 -$ helm upgrade -i authorizationk8sio-localsubjectaccessreview-editor appscode/authorizationk8sio-localsubjectaccessreview-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/authorizationk8sio-localsubjectaccessreview-editor --version=v0.39.0 +$ helm upgrade -i authorizationk8sio-localsubjectaccessreview-editor appscode/authorizationk8sio-localsubjectaccessreview-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a LocalSubjectAccessReview Editor on a [Kubernetes](http://ku To install/upgrade the chart with the release name `authorizationk8sio-localsubjectaccessreview-editor`: ```bash -$ helm upgrade -i authorizationk8sio-localsubjectaccessreview-editor appscode/authorizationk8sio-localsubjectaccessreview-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i authorizationk8sio-localsubjectaccessreview-editor appscode/authorizationk8sio-localsubjectaccessreview-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a LocalSubjectAccessReview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authorizationk8sio Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authorizationk8sio-localsubjectaccessreview-editor appscode/authorizationk8sio-localsubjectaccessreview-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=authorization.k8s.io/v1 +$ helm upgrade -i authorizationk8sio-localsubjectaccessreview-editor appscode/authorizationk8sio-localsubjectaccessreview-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=authorization.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authorizationk8sio-localsubjectaccessreview-editor appscode/authorizationk8sio-localsubjectaccessreview-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i authorizationk8sio-localsubjectaccessreview-editor appscode/authorizationk8sio-localsubjectaccessreview-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/authorizationk8sio-selfsubjectaccessreview-editor/Chart.yaml b/charts/authorizationk8sio-selfsubjectaccessreview-editor/Chart.yaml index a758f63f61..89b59907f3 100644 --- a/charts/authorizationk8sio-selfsubjectaccessreview-editor/Chart.yaml +++ b/charts/authorizationk8sio-selfsubjectaccessreview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authorization.k8s.io","version":"v1","resource":"selfsubjectaccessreviews"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SelfSubjectAccessReview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authorizationk8sio-selfsubjectaccessreview-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/authorizationk8sio-selfsubjectaccessreview-editor/README.md b/charts/authorizationk8sio-selfsubjectaccessreview-editor/README.md index 670cbc4eed..06bc581cfe 100644 --- a/charts/authorizationk8sio-selfsubjectaccessreview-editor/README.md +++ b/charts/authorizationk8sio-selfsubjectaccessreview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authorizationk8sio-selfsubjectaccessreview-editor --version=v0.38.0 -$ helm upgrade -i authorizationk8sio-selfsubjectaccessreview-editor appscode/authorizationk8sio-selfsubjectaccessreview-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/authorizationk8sio-selfsubjectaccessreview-editor --version=v0.39.0 +$ helm upgrade -i authorizationk8sio-selfsubjectaccessreview-editor appscode/authorizationk8sio-selfsubjectaccessreview-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SelfSubjectAccessReview Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `authorizationk8sio-selfsubjectaccessreview-editor`: ```bash -$ helm upgrade -i authorizationk8sio-selfsubjectaccessreview-editor appscode/authorizationk8sio-selfsubjectaccessreview-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i authorizationk8sio-selfsubjectaccessreview-editor appscode/authorizationk8sio-selfsubjectaccessreview-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SelfSubjectAccessReview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authorizationk8sio Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authorizationk8sio-selfsubjectaccessreview-editor appscode/authorizationk8sio-selfsubjectaccessreview-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=authorization.k8s.io/v1 +$ helm upgrade -i authorizationk8sio-selfsubjectaccessreview-editor appscode/authorizationk8sio-selfsubjectaccessreview-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=authorization.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authorizationk8sio-selfsubjectaccessreview-editor appscode/authorizationk8sio-selfsubjectaccessreview-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i authorizationk8sio-selfsubjectaccessreview-editor appscode/authorizationk8sio-selfsubjectaccessreview-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/authorizationk8sio-selfsubjectrulesreview-editor/Chart.yaml b/charts/authorizationk8sio-selfsubjectrulesreview-editor/Chart.yaml index 89792e0308..6c9a416fe1 100644 --- a/charts/authorizationk8sio-selfsubjectrulesreview-editor/Chart.yaml +++ b/charts/authorizationk8sio-selfsubjectrulesreview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authorization.k8s.io","version":"v1","resource":"selfsubjectrulesreviews"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SelfSubjectRulesReview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authorizationk8sio-selfsubjectrulesreview-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/authorizationk8sio-selfsubjectrulesreview-editor/README.md b/charts/authorizationk8sio-selfsubjectrulesreview-editor/README.md index 1edba26775..d3e17bbcc5 100644 --- a/charts/authorizationk8sio-selfsubjectrulesreview-editor/README.md +++ b/charts/authorizationk8sio-selfsubjectrulesreview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authorizationk8sio-selfsubjectrulesreview-editor --version=v0.38.0 -$ helm upgrade -i authorizationk8sio-selfsubjectrulesreview-editor appscode/authorizationk8sio-selfsubjectrulesreview-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/authorizationk8sio-selfsubjectrulesreview-editor --version=v0.39.0 +$ helm upgrade -i authorizationk8sio-selfsubjectrulesreview-editor appscode/authorizationk8sio-selfsubjectrulesreview-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SelfSubjectRulesReview Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `authorizationk8sio-selfsubjectrulesreview-editor`: ```bash -$ helm upgrade -i authorizationk8sio-selfsubjectrulesreview-editor appscode/authorizationk8sio-selfsubjectrulesreview-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i authorizationk8sio-selfsubjectrulesreview-editor appscode/authorizationk8sio-selfsubjectrulesreview-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SelfSubjectRulesReview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authorizationk8sio Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authorizationk8sio-selfsubjectrulesreview-editor appscode/authorizationk8sio-selfsubjectrulesreview-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=authorization.k8s.io/v1 +$ helm upgrade -i authorizationk8sio-selfsubjectrulesreview-editor appscode/authorizationk8sio-selfsubjectrulesreview-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=authorization.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authorizationk8sio-selfsubjectrulesreview-editor appscode/authorizationk8sio-selfsubjectrulesreview-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i authorizationk8sio-selfsubjectrulesreview-editor appscode/authorizationk8sio-selfsubjectrulesreview-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/authorizationk8sio-subjectaccessreview-editor/Chart.yaml b/charts/authorizationk8sio-subjectaccessreview-editor/Chart.yaml index efe2c4755d..abe5fef8e0 100644 --- a/charts/authorizationk8sio-subjectaccessreview-editor/Chart.yaml +++ b/charts/authorizationk8sio-subjectaccessreview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authorization.k8s.io","version":"v1","resource":"subjectaccessreviews"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SubjectAccessReview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authorizationk8sio-subjectaccessreview-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/authorizationk8sio-subjectaccessreview-editor/README.md b/charts/authorizationk8sio-subjectaccessreview-editor/README.md index b217b588dd..60042677a2 100644 --- a/charts/authorizationk8sio-subjectaccessreview-editor/README.md +++ b/charts/authorizationk8sio-subjectaccessreview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authorizationk8sio-subjectaccessreview-editor --version=v0.38.0 -$ helm upgrade -i authorizationk8sio-subjectaccessreview-editor appscode/authorizationk8sio-subjectaccessreview-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/authorizationk8sio-subjectaccessreview-editor --version=v0.39.0 +$ helm upgrade -i authorizationk8sio-subjectaccessreview-editor appscode/authorizationk8sio-subjectaccessreview-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SubjectAccessReview Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `authorizationk8sio-subjectaccessreview-editor`: ```bash -$ helm upgrade -i authorizationk8sio-subjectaccessreview-editor appscode/authorizationk8sio-subjectaccessreview-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i authorizationk8sio-subjectaccessreview-editor appscode/authorizationk8sio-subjectaccessreview-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SubjectAccessReview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authorizationk8sio Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authorizationk8sio-subjectaccessreview-editor appscode/authorizationk8sio-subjectaccessreview-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=authorization.k8s.io/v1 +$ helm upgrade -i authorizationk8sio-subjectaccessreview-editor appscode/authorizationk8sio-subjectaccessreview-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=authorization.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authorizationk8sio-subjectaccessreview-editor appscode/authorizationk8sio-subjectaccessreview-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i authorizationk8sio-subjectaccessreview-editor appscode/authorizationk8sio-subjectaccessreview-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscaling-horizontalpodautoscaler-editor/Chart.yaml b/charts/autoscaling-horizontalpodautoscaler-editor/Chart.yaml index 1983030d6f..77299c571b 100644 --- a/charts/autoscaling-horizontalpodautoscaler-editor/Chart.yaml +++ b/charts/autoscaling-horizontalpodautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling","version":"v2beta2","resource":"horizontalpodautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: HorizontalPodAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscaling-horizontalpodautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscaling-horizontalpodautoscaler-editor/README.md b/charts/autoscaling-horizontalpodautoscaler-editor/README.md index daa6ab56f2..c1899c1918 100644 --- a/charts/autoscaling-horizontalpodautoscaler-editor/README.md +++ b/charts/autoscaling-horizontalpodautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscaling-horizontalpodautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscaling-horizontalpodautoscaler-editor appscode/autoscaling-horizontalpodautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscaling-horizontalpodautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscaling-horizontalpodautoscaler-editor appscode/autoscaling-horizontalpodautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HorizontalPodAutoscaler Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `autoscaling-horizontalpodautoscaler-editor`: ```bash -$ helm upgrade -i autoscaling-horizontalpodautoscaler-editor appscode/autoscaling-horizontalpodautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscaling-horizontalpodautoscaler-editor appscode/autoscaling-horizontalpodautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a HorizontalPodAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscaling-horizo Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscaling-horizontalpodautoscaler-editor appscode/autoscaling-horizontalpodautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling/v2beta2 +$ helm upgrade -i autoscaling-horizontalpodautoscaler-editor appscode/autoscaling-horizontalpodautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling/v2beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscaling-horizontalpodautoscaler-editor appscode/autoscaling-horizontalpodautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscaling-horizontalpodautoscaler-editor appscode/autoscaling-horizontalpodautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingk8sio-verticalpodautoscaler-editor/Chart.yaml b/charts/autoscalingk8sio-verticalpodautoscaler-editor/Chart.yaml index b8f6340de0..9c09ea3314 100644 --- a/charts/autoscalingk8sio-verticalpodautoscaler-editor/Chart.yaml +++ b/charts/autoscalingk8sio-verticalpodautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.k8s.io","version":"v1","resource":"verticalpodautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: VerticalPodAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingk8sio-verticalpodautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingk8sio-verticalpodautoscaler-editor/README.md b/charts/autoscalingk8sio-verticalpodautoscaler-editor/README.md index ad8b7c2e5b..754ecd0270 100644 --- a/charts/autoscalingk8sio-verticalpodautoscaler-editor/README.md +++ b/charts/autoscalingk8sio-verticalpodautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingk8sio-verticalpodautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingk8sio-verticalpodautoscaler-editor appscode/autoscalingk8sio-verticalpodautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingk8sio-verticalpodautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingk8sio-verticalpodautoscaler-editor appscode/autoscalingk8sio-verticalpodautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VerticalPodAutoscaler Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `autoscalingk8sio-verticalpodautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingk8sio-verticalpodautoscaler-editor appscode/autoscalingk8sio-verticalpodautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingk8sio-verticalpodautoscaler-editor appscode/autoscalingk8sio-verticalpodautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a VerticalPodAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingk8sio-v Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingk8sio-verticalpodautoscaler-editor appscode/autoscalingk8sio-verticalpodautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.k8s.io/v1 +$ helm upgrade -i autoscalingk8sio-verticalpodautoscaler-editor appscode/autoscalingk8sio-verticalpodautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingk8sio-verticalpodautoscaler-editor appscode/autoscalingk8sio-verticalpodautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingk8sio-verticalpodautoscaler-editor appscode/autoscalingk8sio-verticalpodautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingk8sio-verticalpodautoscalercheckpoint-editor/Chart.yaml b/charts/autoscalingk8sio-verticalpodautoscalercheckpoint-editor/Chart.yaml index 8fdfa3e5c6..576e5f8f61 100644 --- a/charts/autoscalingk8sio-verticalpodautoscalercheckpoint-editor/Chart.yaml +++ b/charts/autoscalingk8sio-verticalpodautoscalercheckpoint-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.k8s.io","version":"v1","resource":"verticalpodautoscalercheckpoints"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: VerticalPodAutoscalerCheckpoint Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingk8sio-verticalpodautoscalercheckpoint-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingk8sio-verticalpodautoscalercheckpoint-editor/README.md b/charts/autoscalingk8sio-verticalpodautoscalercheckpoint-editor/README.md index e1b5f2a908..457d207184 100644 --- a/charts/autoscalingk8sio-verticalpodautoscalercheckpoint-editor/README.md +++ b/charts/autoscalingk8sio-verticalpodautoscalercheckpoint-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingk8sio-verticalpodautoscalercheckpoint-editor --version=v0.38.0 -$ helm upgrade -i autoscalingk8sio-verticalpodautoscalercheckpoint-editor appscode/autoscalingk8sio-verticalpodautoscalercheckpoint-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingk8sio-verticalpodautoscalercheckpoint-editor --version=v0.39.0 +$ helm upgrade -i autoscalingk8sio-verticalpodautoscalercheckpoint-editor appscode/autoscalingk8sio-verticalpodautoscalercheckpoint-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VerticalPodAutoscalerCheckpoint Editor on a [Kubernetes](ht To install/upgrade the chart with the release name `autoscalingk8sio-verticalpodautoscalercheckpoint-editor`: ```bash -$ helm upgrade -i autoscalingk8sio-verticalpodautoscalercheckpoint-editor appscode/autoscalingk8sio-verticalpodautoscalercheckpoint-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingk8sio-verticalpodautoscalercheckpoint-editor appscode/autoscalingk8sio-verticalpodautoscalercheckpoint-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a VerticalPodAutoscalerCheckpoint Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingk8sio-v Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingk8sio-verticalpodautoscalercheckpoint-editor appscode/autoscalingk8sio-verticalpodautoscalercheckpoint-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.k8s.io/v1 +$ helm upgrade -i autoscalingk8sio-verticalpodautoscalercheckpoint-editor appscode/autoscalingk8sio-verticalpodautoscalercheckpoint-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingk8sio-verticalpodautoscalercheckpoint-editor appscode/autoscalingk8sio-verticalpodautoscalercheckpoint-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingk8sio-verticalpodautoscalercheckpoint-editor appscode/autoscalingk8sio-verticalpodautoscalercheckpoint-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-aerospikeautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-aerospikeautoscaler-editor/Chart.yaml index 0be7159318..bbfb3160e6 100644 --- a/charts/autoscalingkubedbcom-aerospikeautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-aerospikeautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"aerospikeautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AerospikeAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-aerospikeautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-aerospikeautoscaler-editor/README.md b/charts/autoscalingkubedbcom-aerospikeautoscaler-editor/README.md index c3f4712c5d..7b1658f228 100644 --- a/charts/autoscalingkubedbcom-aerospikeautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-aerospikeautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-aerospikeautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-aerospikeautoscaler-editor appscode/autoscalingkubedbcom-aerospikeautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-aerospikeautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-aerospikeautoscaler-editor appscode/autoscalingkubedbcom-aerospikeautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AerospikeAutoscaler Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `autoscalingkubedbcom-aerospikeautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-aerospikeautoscaler-editor appscode/autoscalingkubedbcom-aerospikeautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-aerospikeautoscaler-editor appscode/autoscalingkubedbcom-aerospikeautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AerospikeAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-aerospikeautoscaler-editor appscode/autoscalingkubedbcom-aerospikeautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-aerospikeautoscaler-editor appscode/autoscalingkubedbcom-aerospikeautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-aerospikeautoscaler-editor appscode/autoscalingkubedbcom-aerospikeautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-aerospikeautoscaler-editor appscode/autoscalingkubedbcom-aerospikeautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-cassandraautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-cassandraautoscaler-editor/Chart.yaml index 97167a139a..32b3388031 100644 --- a/charts/autoscalingkubedbcom-cassandraautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-cassandraautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"cassandraautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: CassandraAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-cassandraautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-cassandraautoscaler-editor/README.md b/charts/autoscalingkubedbcom-cassandraautoscaler-editor/README.md index 0f8fd92ff5..c43f44c71a 100644 --- a/charts/autoscalingkubedbcom-cassandraautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-cassandraautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-cassandraautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-cassandraautoscaler-editor appscode/autoscalingkubedbcom-cassandraautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-cassandraautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-cassandraautoscaler-editor appscode/autoscalingkubedbcom-cassandraautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CassandraAutoscaler Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `autoscalingkubedbcom-cassandraautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-cassandraautoscaler-editor appscode/autoscalingkubedbcom-cassandraautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-cassandraautoscaler-editor appscode/autoscalingkubedbcom-cassandraautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a CassandraAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-cassandraautoscaler-editor appscode/autoscalingkubedbcom-cassandraautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-cassandraautoscaler-editor appscode/autoscalingkubedbcom-cassandraautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-cassandraautoscaler-editor appscode/autoscalingkubedbcom-cassandraautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-cassandraautoscaler-editor appscode/autoscalingkubedbcom-cassandraautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-clickhouseautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-clickhouseautoscaler-editor/Chart.yaml index 4354fe667f..786a090802 100644 --- a/charts/autoscalingkubedbcom-clickhouseautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-clickhouseautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"clickhouseautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClickHouseAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-clickhouseautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-clickhouseautoscaler-editor/README.md b/charts/autoscalingkubedbcom-clickhouseautoscaler-editor/README.md index 72d54f40ae..a3d97abfed 100644 --- a/charts/autoscalingkubedbcom-clickhouseautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-clickhouseautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-clickhouseautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-clickhouseautoscaler-editor appscode/autoscalingkubedbcom-clickhouseautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-clickhouseautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-clickhouseautoscaler-editor appscode/autoscalingkubedbcom-clickhouseautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClickHouseAutoscaler Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `autoscalingkubedbcom-clickhouseautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-clickhouseautoscaler-editor appscode/autoscalingkubedbcom-clickhouseautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-clickhouseautoscaler-editor appscode/autoscalingkubedbcom-clickhouseautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClickHouseAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-clickhouseautoscaler-editor appscode/autoscalingkubedbcom-clickhouseautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-clickhouseautoscaler-editor appscode/autoscalingkubedbcom-clickhouseautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-clickhouseautoscaler-editor appscode/autoscalingkubedbcom-clickhouseautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-clickhouseautoscaler-editor appscode/autoscalingkubedbcom-clickhouseautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-db2autoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-db2autoscaler-editor/Chart.yaml index 0f9ace3f77..c3fdef3e50 100644 --- a/charts/autoscalingkubedbcom-db2autoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-db2autoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"db2autoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DB2Autoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-db2autoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-db2autoscaler-editor/README.md b/charts/autoscalingkubedbcom-db2autoscaler-editor/README.md index 0a71b36bfd..213af6c90d 100644 --- a/charts/autoscalingkubedbcom-db2autoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-db2autoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-db2autoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-db2autoscaler-editor appscode/autoscalingkubedbcom-db2autoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-db2autoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-db2autoscaler-editor appscode/autoscalingkubedbcom-db2autoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DB2Autoscaler Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `autoscalingkubedbcom-db2autoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-db2autoscaler-editor appscode/autoscalingkubedbcom-db2autoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-db2autoscaler-editor appscode/autoscalingkubedbcom-db2autoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DB2Autoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-db2autoscaler-editor appscode/autoscalingkubedbcom-db2autoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-db2autoscaler-editor appscode/autoscalingkubedbcom-db2autoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-db2autoscaler-editor appscode/autoscalingkubedbcom-db2autoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-db2autoscaler-editor appscode/autoscalingkubedbcom-db2autoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-documentdbautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-documentdbautoscaler-editor/Chart.yaml index 10cbf79125..8d02fc5dcf 100644 --- a/charts/autoscalingkubedbcom-documentdbautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-documentdbautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"documentdbautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DocumentDBAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-documentdbautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-documentdbautoscaler-editor/README.md b/charts/autoscalingkubedbcom-documentdbautoscaler-editor/README.md index 6df5c00fca..c0cae9405c 100644 --- a/charts/autoscalingkubedbcom-documentdbautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-documentdbautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-documentdbautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-documentdbautoscaler-editor appscode/autoscalingkubedbcom-documentdbautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-documentdbautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-documentdbautoscaler-editor appscode/autoscalingkubedbcom-documentdbautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DocumentDBAutoscaler Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `autoscalingkubedbcom-documentdbautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-documentdbautoscaler-editor appscode/autoscalingkubedbcom-documentdbautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-documentdbautoscaler-editor appscode/autoscalingkubedbcom-documentdbautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DocumentDBAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-documentdbautoscaler-editor appscode/autoscalingkubedbcom-documentdbautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-documentdbautoscaler-editor appscode/autoscalingkubedbcom-documentdbautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-documentdbautoscaler-editor appscode/autoscalingkubedbcom-documentdbautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-documentdbautoscaler-editor appscode/autoscalingkubedbcom-documentdbautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-druidautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-druidautoscaler-editor/Chart.yaml index 4b26661328..0f6f1a4102 100644 --- a/charts/autoscalingkubedbcom-druidautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-druidautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"druidautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DruidAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-druidautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-druidautoscaler-editor/README.md b/charts/autoscalingkubedbcom-druidautoscaler-editor/README.md index 0f84730734..3a7aaa8ea6 100644 --- a/charts/autoscalingkubedbcom-druidautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-druidautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-druidautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-druidautoscaler-editor appscode/autoscalingkubedbcom-druidautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-druidautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-druidautoscaler-editor appscode/autoscalingkubedbcom-druidautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DruidAutoscaler Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `autoscalingkubedbcom-druidautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-druidautoscaler-editor appscode/autoscalingkubedbcom-druidautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-druidautoscaler-editor appscode/autoscalingkubedbcom-druidautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DruidAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-druidautoscaler-editor appscode/autoscalingkubedbcom-druidautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-druidautoscaler-editor appscode/autoscalingkubedbcom-druidautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-druidautoscaler-editor appscode/autoscalingkubedbcom-druidautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-druidautoscaler-editor appscode/autoscalingkubedbcom-druidautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-elasticsearchautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-elasticsearchautoscaler-editor/Chart.yaml index 65ffc78a57..fd2d488429 100644 --- a/charts/autoscalingkubedbcom-elasticsearchautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-elasticsearchautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"elasticsearchautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ElasticsearchAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-elasticsearchautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-elasticsearchautoscaler-editor/README.md b/charts/autoscalingkubedbcom-elasticsearchautoscaler-editor/README.md index e4686147f7..e3dd6e2fd4 100644 --- a/charts/autoscalingkubedbcom-elasticsearchautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-elasticsearchautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-elasticsearchautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-elasticsearchautoscaler-editor appscode/autoscalingkubedbcom-elasticsearchautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-elasticsearchautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-elasticsearchautoscaler-editor appscode/autoscalingkubedbcom-elasticsearchautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ElasticsearchAutoscaler Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `autoscalingkubedbcom-elasticsearchautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-elasticsearchautoscaler-editor appscode/autoscalingkubedbcom-elasticsearchautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-elasticsearchautoscaler-editor appscode/autoscalingkubedbcom-elasticsearchautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ElasticsearchAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-elasticsearchautoscaler-editor appscode/autoscalingkubedbcom-elasticsearchautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-elasticsearchautoscaler-editor appscode/autoscalingkubedbcom-elasticsearchautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-elasticsearchautoscaler-editor appscode/autoscalingkubedbcom-elasticsearchautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-elasticsearchautoscaler-editor appscode/autoscalingkubedbcom-elasticsearchautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-etcdautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-etcdautoscaler-editor/Chart.yaml index ff97ac03f1..ba67652022 100644 --- a/charts/autoscalingkubedbcom-etcdautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-etcdautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"etcdautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: EtcdAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-etcdautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-etcdautoscaler-editor/README.md b/charts/autoscalingkubedbcom-etcdautoscaler-editor/README.md index 9aa2045650..a60fc25259 100644 --- a/charts/autoscalingkubedbcom-etcdautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-etcdautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-etcdautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-etcdautoscaler-editor appscode/autoscalingkubedbcom-etcdautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-etcdautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-etcdautoscaler-editor appscode/autoscalingkubedbcom-etcdautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EtcdAutoscaler Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `autoscalingkubedbcom-etcdautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-etcdautoscaler-editor appscode/autoscalingkubedbcom-etcdautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-etcdautoscaler-editor appscode/autoscalingkubedbcom-etcdautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a EtcdAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-etcdautoscaler-editor appscode/autoscalingkubedbcom-etcdautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-etcdautoscaler-editor appscode/autoscalingkubedbcom-etcdautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-etcdautoscaler-editor appscode/autoscalingkubedbcom-etcdautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-etcdautoscaler-editor appscode/autoscalingkubedbcom-etcdautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-hanadbautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-hanadbautoscaler-editor/Chart.yaml index cd2d14a13d..64d4413fea 100644 --- a/charts/autoscalingkubedbcom-hanadbautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-hanadbautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"hanadbautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: HanaDBAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-hanadbautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-hanadbautoscaler-editor/README.md b/charts/autoscalingkubedbcom-hanadbautoscaler-editor/README.md index 3f3a9922db..49b58b0dd2 100644 --- a/charts/autoscalingkubedbcom-hanadbautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-hanadbautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-hanadbautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-hanadbautoscaler-editor appscode/autoscalingkubedbcom-hanadbautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-hanadbautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-hanadbautoscaler-editor appscode/autoscalingkubedbcom-hanadbautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HanaDBAutoscaler Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `autoscalingkubedbcom-hanadbautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-hanadbautoscaler-editor appscode/autoscalingkubedbcom-hanadbautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-hanadbautoscaler-editor appscode/autoscalingkubedbcom-hanadbautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a HanaDBAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-hanadbautoscaler-editor appscode/autoscalingkubedbcom-hanadbautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-hanadbautoscaler-editor appscode/autoscalingkubedbcom-hanadbautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-hanadbautoscaler-editor appscode/autoscalingkubedbcom-hanadbautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-hanadbautoscaler-editor appscode/autoscalingkubedbcom-hanadbautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-hazelcastautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-hazelcastautoscaler-editor/Chart.yaml index 0586a0c307..0d622c1c1c 100644 --- a/charts/autoscalingkubedbcom-hazelcastautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-hazelcastautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"hazelcastautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: HazelcastAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-hazelcastautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-hazelcastautoscaler-editor/README.md b/charts/autoscalingkubedbcom-hazelcastautoscaler-editor/README.md index ee30816ffe..f9bcff6d11 100644 --- a/charts/autoscalingkubedbcom-hazelcastautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-hazelcastautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-hazelcastautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-hazelcastautoscaler-editor appscode/autoscalingkubedbcom-hazelcastautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-hazelcastautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-hazelcastautoscaler-editor appscode/autoscalingkubedbcom-hazelcastautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HazelcastAutoscaler Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `autoscalingkubedbcom-hazelcastautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-hazelcastautoscaler-editor appscode/autoscalingkubedbcom-hazelcastautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-hazelcastautoscaler-editor appscode/autoscalingkubedbcom-hazelcastautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a HazelcastAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-hazelcastautoscaler-editor appscode/autoscalingkubedbcom-hazelcastautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-hazelcastautoscaler-editor appscode/autoscalingkubedbcom-hazelcastautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-hazelcastautoscaler-editor appscode/autoscalingkubedbcom-hazelcastautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-hazelcastautoscaler-editor appscode/autoscalingkubedbcom-hazelcastautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-igniteautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-igniteautoscaler-editor/Chart.yaml index 26ae0052a2..10e320021f 100644 --- a/charts/autoscalingkubedbcom-igniteautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-igniteautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"igniteautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: IgniteAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-igniteautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-igniteautoscaler-editor/README.md b/charts/autoscalingkubedbcom-igniteautoscaler-editor/README.md index b046dca4c8..e4d3a0727a 100644 --- a/charts/autoscalingkubedbcom-igniteautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-igniteautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-igniteautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-igniteautoscaler-editor appscode/autoscalingkubedbcom-igniteautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-igniteautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-igniteautoscaler-editor appscode/autoscalingkubedbcom-igniteautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a IgniteAutoscaler Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `autoscalingkubedbcom-igniteautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-igniteautoscaler-editor appscode/autoscalingkubedbcom-igniteautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-igniteautoscaler-editor appscode/autoscalingkubedbcom-igniteautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a IgniteAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-igniteautoscaler-editor appscode/autoscalingkubedbcom-igniteautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-igniteautoscaler-editor appscode/autoscalingkubedbcom-igniteautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-igniteautoscaler-editor appscode/autoscalingkubedbcom-igniteautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-igniteautoscaler-editor appscode/autoscalingkubedbcom-igniteautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-kafkaautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-kafkaautoscaler-editor/Chart.yaml index afb5e13b4e..c9fceb0775 100644 --- a/charts/autoscalingkubedbcom-kafkaautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-kafkaautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"kafkaautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: KafkaAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-kafkaautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-kafkaautoscaler-editor/README.md b/charts/autoscalingkubedbcom-kafkaautoscaler-editor/README.md index f612afc675..40032a5ced 100644 --- a/charts/autoscalingkubedbcom-kafkaautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-kafkaautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-kafkaautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-kafkaautoscaler-editor appscode/autoscalingkubedbcom-kafkaautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-kafkaautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-kafkaautoscaler-editor appscode/autoscalingkubedbcom-kafkaautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a KafkaAutoscaler Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `autoscalingkubedbcom-kafkaautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-kafkaautoscaler-editor appscode/autoscalingkubedbcom-kafkaautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-kafkaautoscaler-editor appscode/autoscalingkubedbcom-kafkaautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a KafkaAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-kafkaautoscaler-editor appscode/autoscalingkubedbcom-kafkaautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-kafkaautoscaler-editor appscode/autoscalingkubedbcom-kafkaautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-kafkaautoscaler-editor appscode/autoscalingkubedbcom-kafkaautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-kafkaautoscaler-editor appscode/autoscalingkubedbcom-kafkaautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-mariadbautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-mariadbautoscaler-editor/Chart.yaml index cb5b7f2be8..faef508854 100644 --- a/charts/autoscalingkubedbcom-mariadbautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-mariadbautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"mariadbautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MariaDBAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-mariadbautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-mariadbautoscaler-editor/README.md b/charts/autoscalingkubedbcom-mariadbautoscaler-editor/README.md index ea1867728b..7ff99b9432 100644 --- a/charts/autoscalingkubedbcom-mariadbautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-mariadbautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-mariadbautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-mariadbautoscaler-editor appscode/autoscalingkubedbcom-mariadbautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-mariadbautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-mariadbautoscaler-editor appscode/autoscalingkubedbcom-mariadbautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBAutoscaler Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `autoscalingkubedbcom-mariadbautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-mariadbautoscaler-editor appscode/autoscalingkubedbcom-mariadbautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-mariadbautoscaler-editor appscode/autoscalingkubedbcom-mariadbautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MariaDBAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-mariadbautoscaler-editor appscode/autoscalingkubedbcom-mariadbautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-mariadbautoscaler-editor appscode/autoscalingkubedbcom-mariadbautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-mariadbautoscaler-editor appscode/autoscalingkubedbcom-mariadbautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-mariadbautoscaler-editor appscode/autoscalingkubedbcom-mariadbautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-memcachedautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-memcachedautoscaler-editor/Chart.yaml index a43d579308..6dd022f7cc 100644 --- a/charts/autoscalingkubedbcom-memcachedautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-memcachedautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"memcachedautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MemcachedAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-memcachedautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-memcachedautoscaler-editor/README.md b/charts/autoscalingkubedbcom-memcachedautoscaler-editor/README.md index b23b63ac3f..b89832cb98 100644 --- a/charts/autoscalingkubedbcom-memcachedautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-memcachedautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-memcachedautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-memcachedautoscaler-editor appscode/autoscalingkubedbcom-memcachedautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-memcachedautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-memcachedautoscaler-editor appscode/autoscalingkubedbcom-memcachedautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MemcachedAutoscaler Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `autoscalingkubedbcom-memcachedautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-memcachedautoscaler-editor appscode/autoscalingkubedbcom-memcachedautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-memcachedautoscaler-editor appscode/autoscalingkubedbcom-memcachedautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MemcachedAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-memcachedautoscaler-editor appscode/autoscalingkubedbcom-memcachedautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-memcachedautoscaler-editor appscode/autoscalingkubedbcom-memcachedautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-memcachedautoscaler-editor appscode/autoscalingkubedbcom-memcachedautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-memcachedautoscaler-editor appscode/autoscalingkubedbcom-memcachedautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-milvusautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-milvusautoscaler-editor/Chart.yaml index 40cb29e96c..9ecfc8e3c6 100644 --- a/charts/autoscalingkubedbcom-milvusautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-milvusautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"milvusautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MilvusAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-milvusautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-milvusautoscaler-editor/README.md b/charts/autoscalingkubedbcom-milvusautoscaler-editor/README.md index 7afa2dc563..7d1d2c5cf6 100644 --- a/charts/autoscalingkubedbcom-milvusautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-milvusautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-milvusautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-milvusautoscaler-editor appscode/autoscalingkubedbcom-milvusautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-milvusautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-milvusautoscaler-editor appscode/autoscalingkubedbcom-milvusautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MilvusAutoscaler Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `autoscalingkubedbcom-milvusautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-milvusautoscaler-editor appscode/autoscalingkubedbcom-milvusautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-milvusautoscaler-editor appscode/autoscalingkubedbcom-milvusautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MilvusAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-milvusautoscaler-editor appscode/autoscalingkubedbcom-milvusautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-milvusautoscaler-editor appscode/autoscalingkubedbcom-milvusautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-milvusautoscaler-editor appscode/autoscalingkubedbcom-milvusautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-milvusautoscaler-editor appscode/autoscalingkubedbcom-milvusautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-mongodbautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-mongodbautoscaler-editor/Chart.yaml index 00f1f1c763..8282866f5e 100644 --- a/charts/autoscalingkubedbcom-mongodbautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-mongodbautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"mongodbautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MongoDBAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-mongodbautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-mongodbautoscaler-editor/README.md b/charts/autoscalingkubedbcom-mongodbautoscaler-editor/README.md index f0588a13e4..d431a016eb 100644 --- a/charts/autoscalingkubedbcom-mongodbautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-mongodbautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-mongodbautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-mongodbautoscaler-editor appscode/autoscalingkubedbcom-mongodbautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-mongodbautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-mongodbautoscaler-editor appscode/autoscalingkubedbcom-mongodbautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBAutoscaler Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `autoscalingkubedbcom-mongodbautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-mongodbautoscaler-editor appscode/autoscalingkubedbcom-mongodbautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-mongodbautoscaler-editor appscode/autoscalingkubedbcom-mongodbautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MongoDBAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-mongodbautoscaler-editor appscode/autoscalingkubedbcom-mongodbautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-mongodbautoscaler-editor appscode/autoscalingkubedbcom-mongodbautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-mongodbautoscaler-editor appscode/autoscalingkubedbcom-mongodbautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-mongodbautoscaler-editor appscode/autoscalingkubedbcom-mongodbautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-mssqlserverautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-mssqlserverautoscaler-editor/Chart.yaml index 327ed3e588..1d23c4b6a6 100644 --- a/charts/autoscalingkubedbcom-mssqlserverautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-mssqlserverautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"mssqlserverautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLServerAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-mssqlserverautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-mssqlserverautoscaler-editor/README.md b/charts/autoscalingkubedbcom-mssqlserverautoscaler-editor/README.md index 32e83d7f9b..2fa91583fa 100644 --- a/charts/autoscalingkubedbcom-mssqlserverautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-mssqlserverautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-mssqlserverautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-mssqlserverautoscaler-editor appscode/autoscalingkubedbcom-mssqlserverautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-mssqlserverautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-mssqlserverautoscaler-editor appscode/autoscalingkubedbcom-mssqlserverautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerAutoscaler Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `autoscalingkubedbcom-mssqlserverautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-mssqlserverautoscaler-editor appscode/autoscalingkubedbcom-mssqlserverautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-mssqlserverautoscaler-editor appscode/autoscalingkubedbcom-mssqlserverautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLServerAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-mssqlserverautoscaler-editor appscode/autoscalingkubedbcom-mssqlserverautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-mssqlserverautoscaler-editor appscode/autoscalingkubedbcom-mssqlserverautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-mssqlserverautoscaler-editor appscode/autoscalingkubedbcom-mssqlserverautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-mssqlserverautoscaler-editor appscode/autoscalingkubedbcom-mssqlserverautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-mysqlautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-mysqlautoscaler-editor/Chart.yaml index cc1a6eb326..3d7967cbf3 100644 --- a/charts/autoscalingkubedbcom-mysqlautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-mysqlautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"mysqlautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MySQLAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-mysqlautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-mysqlautoscaler-editor/README.md b/charts/autoscalingkubedbcom-mysqlautoscaler-editor/README.md index 0069caef3c..9ac0335226 100644 --- a/charts/autoscalingkubedbcom-mysqlautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-mysqlautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-mysqlautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-mysqlautoscaler-editor appscode/autoscalingkubedbcom-mysqlautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-mysqlautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-mysqlautoscaler-editor appscode/autoscalingkubedbcom-mysqlautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLAutoscaler Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `autoscalingkubedbcom-mysqlautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-mysqlautoscaler-editor appscode/autoscalingkubedbcom-mysqlautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-mysqlautoscaler-editor appscode/autoscalingkubedbcom-mysqlautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MySQLAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-mysqlautoscaler-editor appscode/autoscalingkubedbcom-mysqlautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-mysqlautoscaler-editor appscode/autoscalingkubedbcom-mysqlautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-mysqlautoscaler-editor appscode/autoscalingkubedbcom-mysqlautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-mysqlautoscaler-editor appscode/autoscalingkubedbcom-mysqlautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-neo4jautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-neo4jautoscaler-editor/Chart.yaml index 5bc6a16363..5dddafe7c6 100644 --- a/charts/autoscalingkubedbcom-neo4jautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-neo4jautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"neo4jautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Neo4jAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-neo4jautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-neo4jautoscaler-editor/README.md b/charts/autoscalingkubedbcom-neo4jautoscaler-editor/README.md index b0023dda77..f66d2d1b2c 100644 --- a/charts/autoscalingkubedbcom-neo4jautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-neo4jautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-neo4jautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-neo4jautoscaler-editor appscode/autoscalingkubedbcom-neo4jautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-neo4jautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-neo4jautoscaler-editor appscode/autoscalingkubedbcom-neo4jautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Neo4jAutoscaler Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `autoscalingkubedbcom-neo4jautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-neo4jautoscaler-editor appscode/autoscalingkubedbcom-neo4jautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-neo4jautoscaler-editor appscode/autoscalingkubedbcom-neo4jautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Neo4jAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-neo4jautoscaler-editor appscode/autoscalingkubedbcom-neo4jautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-neo4jautoscaler-editor appscode/autoscalingkubedbcom-neo4jautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-neo4jautoscaler-editor appscode/autoscalingkubedbcom-neo4jautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-neo4jautoscaler-editor appscode/autoscalingkubedbcom-neo4jautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-oracleautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-oracleautoscaler-editor/Chart.yaml index 2f4932d509..a87ea6b2e6 100644 --- a/charts/autoscalingkubedbcom-oracleautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-oracleautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"oracleautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: OracleAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-oracleautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-oracleautoscaler-editor/README.md b/charts/autoscalingkubedbcom-oracleautoscaler-editor/README.md index 6be239056e..db150d1ade 100644 --- a/charts/autoscalingkubedbcom-oracleautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-oracleautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-oracleautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-oracleautoscaler-editor appscode/autoscalingkubedbcom-oracleautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-oracleautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-oracleautoscaler-editor appscode/autoscalingkubedbcom-oracleautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a OracleAutoscaler Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `autoscalingkubedbcom-oracleautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-oracleautoscaler-editor appscode/autoscalingkubedbcom-oracleautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-oracleautoscaler-editor appscode/autoscalingkubedbcom-oracleautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a OracleAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-oracleautoscaler-editor appscode/autoscalingkubedbcom-oracleautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-oracleautoscaler-editor appscode/autoscalingkubedbcom-oracleautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-oracleautoscaler-editor appscode/autoscalingkubedbcom-oracleautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-oracleautoscaler-editor appscode/autoscalingkubedbcom-oracleautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-perconaxtradbautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-perconaxtradbautoscaler-editor/Chart.yaml index 843da92ab9..e24a96126d 100644 --- a/charts/autoscalingkubedbcom-perconaxtradbautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-perconaxtradbautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"perconaxtradbautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PerconaXtraDBAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-perconaxtradbautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-perconaxtradbautoscaler-editor/README.md b/charts/autoscalingkubedbcom-perconaxtradbautoscaler-editor/README.md index ebe39f3f12..94f7dd047f 100644 --- a/charts/autoscalingkubedbcom-perconaxtradbautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-perconaxtradbautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-perconaxtradbautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-perconaxtradbautoscaler-editor appscode/autoscalingkubedbcom-perconaxtradbautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-perconaxtradbautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-perconaxtradbautoscaler-editor appscode/autoscalingkubedbcom-perconaxtradbautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PerconaXtraDBAutoscaler Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `autoscalingkubedbcom-perconaxtradbautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-perconaxtradbautoscaler-editor appscode/autoscalingkubedbcom-perconaxtradbautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-perconaxtradbautoscaler-editor appscode/autoscalingkubedbcom-perconaxtradbautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PerconaXtraDBAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-perconaxtradbautoscaler-editor appscode/autoscalingkubedbcom-perconaxtradbautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-perconaxtradbautoscaler-editor appscode/autoscalingkubedbcom-perconaxtradbautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-perconaxtradbautoscaler-editor appscode/autoscalingkubedbcom-perconaxtradbautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-perconaxtradbautoscaler-editor appscode/autoscalingkubedbcom-perconaxtradbautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-pgbouncerautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-pgbouncerautoscaler-editor/Chart.yaml index fe31b3904b..520ee8d00c 100644 --- a/charts/autoscalingkubedbcom-pgbouncerautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-pgbouncerautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"pgbouncerautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PgBouncerAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-pgbouncerautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-pgbouncerautoscaler-editor/README.md b/charts/autoscalingkubedbcom-pgbouncerautoscaler-editor/README.md index 72ff2054ca..e01621965a 100644 --- a/charts/autoscalingkubedbcom-pgbouncerautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-pgbouncerautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-pgbouncerautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-pgbouncerautoscaler-editor appscode/autoscalingkubedbcom-pgbouncerautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-pgbouncerautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-pgbouncerautoscaler-editor appscode/autoscalingkubedbcom-pgbouncerautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncerAutoscaler Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `autoscalingkubedbcom-pgbouncerautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-pgbouncerautoscaler-editor appscode/autoscalingkubedbcom-pgbouncerautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-pgbouncerautoscaler-editor appscode/autoscalingkubedbcom-pgbouncerautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PgBouncerAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-pgbouncerautoscaler-editor appscode/autoscalingkubedbcom-pgbouncerautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-pgbouncerautoscaler-editor appscode/autoscalingkubedbcom-pgbouncerautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-pgbouncerautoscaler-editor appscode/autoscalingkubedbcom-pgbouncerautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-pgbouncerautoscaler-editor appscode/autoscalingkubedbcom-pgbouncerautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-pgpoolautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-pgpoolautoscaler-editor/Chart.yaml index 4ad625ecc9..4f57a9472d 100644 --- a/charts/autoscalingkubedbcom-pgpoolautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-pgpoolautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"pgpoolautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PgpoolAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-pgpoolautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-pgpoolautoscaler-editor/README.md b/charts/autoscalingkubedbcom-pgpoolautoscaler-editor/README.md index f2e1093172..3f1691cd7d 100644 --- a/charts/autoscalingkubedbcom-pgpoolautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-pgpoolautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-pgpoolautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-pgpoolautoscaler-editor appscode/autoscalingkubedbcom-pgpoolautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-pgpoolautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-pgpoolautoscaler-editor appscode/autoscalingkubedbcom-pgpoolautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgpoolAutoscaler Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `autoscalingkubedbcom-pgpoolautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-pgpoolautoscaler-editor appscode/autoscalingkubedbcom-pgpoolautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-pgpoolautoscaler-editor appscode/autoscalingkubedbcom-pgpoolautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PgpoolAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-pgpoolautoscaler-editor appscode/autoscalingkubedbcom-pgpoolautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-pgpoolautoscaler-editor appscode/autoscalingkubedbcom-pgpoolautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-pgpoolautoscaler-editor appscode/autoscalingkubedbcom-pgpoolautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-pgpoolautoscaler-editor appscode/autoscalingkubedbcom-pgpoolautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-postgresautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-postgresautoscaler-editor/Chart.yaml index 03163e81fe..d15681b598 100644 --- a/charts/autoscalingkubedbcom-postgresautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-postgresautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"postgresautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PostgresAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-postgresautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-postgresautoscaler-editor/README.md b/charts/autoscalingkubedbcom-postgresautoscaler-editor/README.md index 9a65fc208c..2376245a84 100644 --- a/charts/autoscalingkubedbcom-postgresautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-postgresautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-postgresautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-postgresautoscaler-editor appscode/autoscalingkubedbcom-postgresautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-postgresautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-postgresautoscaler-editor appscode/autoscalingkubedbcom-postgresautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresAutoscaler Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `autoscalingkubedbcom-postgresautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-postgresautoscaler-editor appscode/autoscalingkubedbcom-postgresautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-postgresautoscaler-editor appscode/autoscalingkubedbcom-postgresautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PostgresAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-postgresautoscaler-editor appscode/autoscalingkubedbcom-postgresautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-postgresautoscaler-editor appscode/autoscalingkubedbcom-postgresautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-postgresautoscaler-editor appscode/autoscalingkubedbcom-postgresautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-postgresautoscaler-editor appscode/autoscalingkubedbcom-postgresautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-proxysqlautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-proxysqlautoscaler-editor/Chart.yaml index 811a1515e4..090325e754 100644 --- a/charts/autoscalingkubedbcom-proxysqlautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-proxysqlautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"proxysqlautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProxySQLAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-proxysqlautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-proxysqlautoscaler-editor/README.md b/charts/autoscalingkubedbcom-proxysqlautoscaler-editor/README.md index f070a0eda7..0de5c9188b 100644 --- a/charts/autoscalingkubedbcom-proxysqlautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-proxysqlautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-proxysqlautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-proxysqlautoscaler-editor appscode/autoscalingkubedbcom-proxysqlautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-proxysqlautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-proxysqlautoscaler-editor appscode/autoscalingkubedbcom-proxysqlautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQLAutoscaler Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `autoscalingkubedbcom-proxysqlautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-proxysqlautoscaler-editor appscode/autoscalingkubedbcom-proxysqlautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-proxysqlautoscaler-editor appscode/autoscalingkubedbcom-proxysqlautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProxySQLAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-proxysqlautoscaler-editor appscode/autoscalingkubedbcom-proxysqlautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-proxysqlautoscaler-editor appscode/autoscalingkubedbcom-proxysqlautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-proxysqlautoscaler-editor appscode/autoscalingkubedbcom-proxysqlautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-proxysqlautoscaler-editor appscode/autoscalingkubedbcom-proxysqlautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-qdrantautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-qdrantautoscaler-editor/Chart.yaml index e6f8b95a3c..f28b10e43e 100644 --- a/charts/autoscalingkubedbcom-qdrantautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-qdrantautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"qdrantautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: QdrantAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-qdrantautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-qdrantautoscaler-editor/README.md b/charts/autoscalingkubedbcom-qdrantautoscaler-editor/README.md index 108dbc1718..708fbf7f78 100644 --- a/charts/autoscalingkubedbcom-qdrantautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-qdrantautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-qdrantautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-qdrantautoscaler-editor appscode/autoscalingkubedbcom-qdrantautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-qdrantautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-qdrantautoscaler-editor appscode/autoscalingkubedbcom-qdrantautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a QdrantAutoscaler Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `autoscalingkubedbcom-qdrantautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-qdrantautoscaler-editor appscode/autoscalingkubedbcom-qdrantautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-qdrantautoscaler-editor appscode/autoscalingkubedbcom-qdrantautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a QdrantAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-qdrantautoscaler-editor appscode/autoscalingkubedbcom-qdrantautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-qdrantautoscaler-editor appscode/autoscalingkubedbcom-qdrantautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-qdrantautoscaler-editor appscode/autoscalingkubedbcom-qdrantautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-qdrantautoscaler-editor appscode/autoscalingkubedbcom-qdrantautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-rabbitmqautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-rabbitmqautoscaler-editor/Chart.yaml index 59cd79c77f..1e44ba3bad 100644 --- a/charts/autoscalingkubedbcom-rabbitmqautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-rabbitmqautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"rabbitmqautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RabbitMQAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-rabbitmqautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-rabbitmqautoscaler-editor/README.md b/charts/autoscalingkubedbcom-rabbitmqautoscaler-editor/README.md index 779f43354a..cd94325b57 100644 --- a/charts/autoscalingkubedbcom-rabbitmqautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-rabbitmqautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-rabbitmqautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-rabbitmqautoscaler-editor appscode/autoscalingkubedbcom-rabbitmqautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-rabbitmqautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-rabbitmqautoscaler-editor appscode/autoscalingkubedbcom-rabbitmqautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RabbitMQAutoscaler Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `autoscalingkubedbcom-rabbitmqautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-rabbitmqautoscaler-editor appscode/autoscalingkubedbcom-rabbitmqautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-rabbitmqautoscaler-editor appscode/autoscalingkubedbcom-rabbitmqautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RabbitMQAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-rabbitmqautoscaler-editor appscode/autoscalingkubedbcom-rabbitmqautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-rabbitmqautoscaler-editor appscode/autoscalingkubedbcom-rabbitmqautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-rabbitmqautoscaler-editor appscode/autoscalingkubedbcom-rabbitmqautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-rabbitmqautoscaler-editor appscode/autoscalingkubedbcom-rabbitmqautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-redisautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-redisautoscaler-editor/Chart.yaml index a41db8dfdc..ddc95d0dd9 100644 --- a/charts/autoscalingkubedbcom-redisautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-redisautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"redisautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RedisAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-redisautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-redisautoscaler-editor/README.md b/charts/autoscalingkubedbcom-redisautoscaler-editor/README.md index 3e46ef243d..2de10ac035 100644 --- a/charts/autoscalingkubedbcom-redisautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-redisautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-redisautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-redisautoscaler-editor appscode/autoscalingkubedbcom-redisautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-redisautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-redisautoscaler-editor appscode/autoscalingkubedbcom-redisautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisAutoscaler Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `autoscalingkubedbcom-redisautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-redisautoscaler-editor appscode/autoscalingkubedbcom-redisautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-redisautoscaler-editor appscode/autoscalingkubedbcom-redisautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RedisAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-redisautoscaler-editor appscode/autoscalingkubedbcom-redisautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-redisautoscaler-editor appscode/autoscalingkubedbcom-redisautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-redisautoscaler-editor appscode/autoscalingkubedbcom-redisautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-redisautoscaler-editor appscode/autoscalingkubedbcom-redisautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-redissentinelautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-redissentinelautoscaler-editor/Chart.yaml index b57943795c..7a5d02ec2b 100644 --- a/charts/autoscalingkubedbcom-redissentinelautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-redissentinelautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"redissentinelautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RedisSentinelAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-redissentinelautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-redissentinelautoscaler-editor/README.md b/charts/autoscalingkubedbcom-redissentinelautoscaler-editor/README.md index 9b0b64c583..ddc5cea3bf 100644 --- a/charts/autoscalingkubedbcom-redissentinelautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-redissentinelautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-redissentinelautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-redissentinelautoscaler-editor appscode/autoscalingkubedbcom-redissentinelautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-redissentinelautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-redissentinelautoscaler-editor appscode/autoscalingkubedbcom-redissentinelautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisSentinelAutoscaler Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `autoscalingkubedbcom-redissentinelautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-redissentinelautoscaler-editor appscode/autoscalingkubedbcom-redissentinelautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-redissentinelautoscaler-editor appscode/autoscalingkubedbcom-redissentinelautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RedisSentinelAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-redissentinelautoscaler-editor appscode/autoscalingkubedbcom-redissentinelautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-redissentinelautoscaler-editor appscode/autoscalingkubedbcom-redissentinelautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-redissentinelautoscaler-editor appscode/autoscalingkubedbcom-redissentinelautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-redissentinelautoscaler-editor appscode/autoscalingkubedbcom-redissentinelautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-singlestoreautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-singlestoreautoscaler-editor/Chart.yaml index 3979458ad7..e8314e5427 100644 --- a/charts/autoscalingkubedbcom-singlestoreautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-singlestoreautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"singlestoreautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SinglestoreAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-singlestoreautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-singlestoreautoscaler-editor/README.md b/charts/autoscalingkubedbcom-singlestoreautoscaler-editor/README.md index 1559f294a0..93b6eee9aa 100644 --- a/charts/autoscalingkubedbcom-singlestoreautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-singlestoreautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-singlestoreautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-singlestoreautoscaler-editor appscode/autoscalingkubedbcom-singlestoreautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-singlestoreautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-singlestoreautoscaler-editor appscode/autoscalingkubedbcom-singlestoreautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SinglestoreAutoscaler Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `autoscalingkubedbcom-singlestoreautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-singlestoreautoscaler-editor appscode/autoscalingkubedbcom-singlestoreautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-singlestoreautoscaler-editor appscode/autoscalingkubedbcom-singlestoreautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SinglestoreAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-singlestoreautoscaler-editor appscode/autoscalingkubedbcom-singlestoreautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-singlestoreautoscaler-editor appscode/autoscalingkubedbcom-singlestoreautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-singlestoreautoscaler-editor appscode/autoscalingkubedbcom-singlestoreautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-singlestoreautoscaler-editor appscode/autoscalingkubedbcom-singlestoreautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-solrautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-solrautoscaler-editor/Chart.yaml index ecf4a6aada..ca21b3d3f3 100644 --- a/charts/autoscalingkubedbcom-solrautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-solrautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"solrautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SolrAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-solrautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-solrautoscaler-editor/README.md b/charts/autoscalingkubedbcom-solrautoscaler-editor/README.md index 0bf341a1f1..800a1c8608 100644 --- a/charts/autoscalingkubedbcom-solrautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-solrautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-solrautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-solrautoscaler-editor appscode/autoscalingkubedbcom-solrautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-solrautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-solrautoscaler-editor appscode/autoscalingkubedbcom-solrautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SolrAutoscaler Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `autoscalingkubedbcom-solrautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-solrautoscaler-editor appscode/autoscalingkubedbcom-solrautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-solrautoscaler-editor appscode/autoscalingkubedbcom-solrautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SolrAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-solrautoscaler-editor appscode/autoscalingkubedbcom-solrautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-solrautoscaler-editor appscode/autoscalingkubedbcom-solrautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-solrautoscaler-editor appscode/autoscalingkubedbcom-solrautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-solrautoscaler-editor appscode/autoscalingkubedbcom-solrautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-verticalautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-verticalautoscaler-editor/Chart.yaml index 146eeddd35..290d909e59 100644 --- a/charts/autoscalingkubedbcom-verticalautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-verticalautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"verticalautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: VerticalAutoscaler Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-verticalautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-verticalautoscaler-editor/README.md b/charts/autoscalingkubedbcom-verticalautoscaler-editor/README.md index 3a486606d6..6df460ee8b 100644 --- a/charts/autoscalingkubedbcom-verticalautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-verticalautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-verticalautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-verticalautoscaler-editor appscode/autoscalingkubedbcom-verticalautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-verticalautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-verticalautoscaler-editor appscode/autoscalingkubedbcom-verticalautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VerticalAutoscaler Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `autoscalingkubedbcom-verticalautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-verticalautoscaler-editor appscode/autoscalingkubedbcom-verticalautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-verticalautoscaler-editor appscode/autoscalingkubedbcom-verticalautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a VerticalAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-verticalautoscaler-editor appscode/autoscalingkubedbcom-verticalautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-verticalautoscaler-editor appscode/autoscalingkubedbcom-verticalautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-verticalautoscaler-editor appscode/autoscalingkubedbcom-verticalautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-verticalautoscaler-editor appscode/autoscalingkubedbcom-verticalautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-verticalautoscalercheckpoint-editor/Chart.yaml b/charts/autoscalingkubedbcom-verticalautoscalercheckpoint-editor/Chart.yaml index 651c9a7908..3edfae8a0c 100644 --- a/charts/autoscalingkubedbcom-verticalautoscalercheckpoint-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-verticalautoscalercheckpoint-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"verticalautoscalercheckpoints"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: VerticalAutoscalerCheckpoint Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-verticalautoscalercheckpoint-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-verticalautoscalercheckpoint-editor/README.md b/charts/autoscalingkubedbcom-verticalautoscalercheckpoint-editor/README.md index 7fbb84a1dd..3abe09970b 100644 --- a/charts/autoscalingkubedbcom-verticalautoscalercheckpoint-editor/README.md +++ b/charts/autoscalingkubedbcom-verticalautoscalercheckpoint-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-verticalautoscalercheckpoint-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-verticalautoscalercheckpoint-editor appscode/autoscalingkubedbcom-verticalautoscalercheckpoint-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-verticalautoscalercheckpoint-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-verticalautoscalercheckpoint-editor appscode/autoscalingkubedbcom-verticalautoscalercheckpoint-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VerticalAutoscalerCheckpoint Editor on a [Kubernetes](http: To install/upgrade the chart with the release name `autoscalingkubedbcom-verticalautoscalercheckpoint-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-verticalautoscalercheckpoint-editor appscode/autoscalingkubedbcom-verticalautoscalercheckpoint-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-verticalautoscalercheckpoint-editor appscode/autoscalingkubedbcom-verticalautoscalercheckpoint-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a VerticalAutoscalerCheckpoint Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-verticalautoscalercheckpoint-editor appscode/autoscalingkubedbcom-verticalautoscalercheckpoint-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-verticalautoscalercheckpoint-editor appscode/autoscalingkubedbcom-verticalautoscalercheckpoint-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-verticalautoscalercheckpoint-editor appscode/autoscalingkubedbcom-verticalautoscalercheckpoint-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-verticalautoscalercheckpoint-editor appscode/autoscalingkubedbcom-verticalautoscalercheckpoint-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-weaviateautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-weaviateautoscaler-editor/Chart.yaml index d106938980..c6a0d08ea4 100644 --- a/charts/autoscalingkubedbcom-weaviateautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-weaviateautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"weaviateautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: WeaviateAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-weaviateautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-weaviateautoscaler-editor/README.md b/charts/autoscalingkubedbcom-weaviateautoscaler-editor/README.md index 2c80420d91..e4d6c6e972 100644 --- a/charts/autoscalingkubedbcom-weaviateautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-weaviateautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-weaviateautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-weaviateautoscaler-editor appscode/autoscalingkubedbcom-weaviateautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-weaviateautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-weaviateautoscaler-editor appscode/autoscalingkubedbcom-weaviateautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a WeaviateAutoscaler Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `autoscalingkubedbcom-weaviateautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-weaviateautoscaler-editor appscode/autoscalingkubedbcom-weaviateautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-weaviateautoscaler-editor appscode/autoscalingkubedbcom-weaviateautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a WeaviateAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-weaviateautoscaler-editor appscode/autoscalingkubedbcom-weaviateautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-weaviateautoscaler-editor appscode/autoscalingkubedbcom-weaviateautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-weaviateautoscaler-editor appscode/autoscalingkubedbcom-weaviateautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-weaviateautoscaler-editor appscode/autoscalingkubedbcom-weaviateautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-zookeeperautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-zookeeperautoscaler-editor/Chart.yaml index c6d105d182..aa9883d8b6 100644 --- a/charts/autoscalingkubedbcom-zookeeperautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-zookeeperautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"zookeeperautoscalers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ZooKeeperAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-zookeeperautoscaler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/autoscalingkubedbcom-zookeeperautoscaler-editor/README.md b/charts/autoscalingkubedbcom-zookeeperautoscaler-editor/README.md index aadc8e3759..8a62d0fecc 100644 --- a/charts/autoscalingkubedbcom-zookeeperautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-zookeeperautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-zookeeperautoscaler-editor --version=v0.38.0 -$ helm upgrade -i autoscalingkubedbcom-zookeeperautoscaler-editor appscode/autoscalingkubedbcom-zookeeperautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/autoscalingkubedbcom-zookeeperautoscaler-editor --version=v0.39.0 +$ helm upgrade -i autoscalingkubedbcom-zookeeperautoscaler-editor appscode/autoscalingkubedbcom-zookeeperautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ZooKeeperAutoscaler Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `autoscalingkubedbcom-zookeeperautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-zookeeperautoscaler-editor appscode/autoscalingkubedbcom-zookeeperautoscaler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i autoscalingkubedbcom-zookeeperautoscaler-editor appscode/autoscalingkubedbcom-zookeeperautoscaler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ZooKeeperAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-zookeeperautoscaler-editor appscode/autoscalingkubedbcom-zookeeperautoscaler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-zookeeperautoscaler-editor appscode/autoscalingkubedbcom-zookeeperautoscaler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-zookeeperautoscaler-editor appscode/autoscalingkubedbcom-zookeeperautoscaler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-zookeeperautoscaler-editor appscode/autoscalingkubedbcom-zookeeperautoscaler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/awskubedbcom-providerconfig-editor/Chart.yaml b/charts/awskubedbcom-providerconfig-editor/Chart.yaml index 4806c94f39..24b67bdaac 100644 --- a/charts/awskubedbcom-providerconfig-editor/Chart.yaml +++ b/charts/awskubedbcom-providerconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"aws.kubedb.com","version":"v1beta1","resource":"providerconfigs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProviderConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: awskubedbcom-providerconfig-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/awskubedbcom-providerconfig-editor/README.md b/charts/awskubedbcom-providerconfig-editor/README.md index 9d47bf1610..4db06087f4 100644 --- a/charts/awskubedbcom-providerconfig-editor/README.md +++ b/charts/awskubedbcom-providerconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/awskubedbcom-providerconfig-editor --version=v0.38.0 -$ helm upgrade -i awskubedbcom-providerconfig-editor appscode/awskubedbcom-providerconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/awskubedbcom-providerconfig-editor --version=v0.39.0 +$ helm upgrade -i awskubedbcom-providerconfig-editor appscode/awskubedbcom-providerconfig-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProviderConfig Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `awskubedbcom-providerconfig-editor`: ```bash -$ helm upgrade -i awskubedbcom-providerconfig-editor appscode/awskubedbcom-providerconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i awskubedbcom-providerconfig-editor appscode/awskubedbcom-providerconfig-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProviderConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `awskubedbcom-provi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i awskubedbcom-providerconfig-editor appscode/awskubedbcom-providerconfig-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=aws.kubedb.com/v1beta1 +$ helm upgrade -i awskubedbcom-providerconfig-editor appscode/awskubedbcom-providerconfig-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=aws.kubedb.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i awskubedbcom-providerconfig-editor appscode/awskubedbcom-providerconfig-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i awskubedbcom-providerconfig-editor appscode/awskubedbcom-providerconfig-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/awskubedbcom-providerconfigusage-editor/Chart.yaml b/charts/awskubedbcom-providerconfigusage-editor/Chart.yaml index f000f43f37..5c05b3f1d7 100644 --- a/charts/awskubedbcom-providerconfigusage-editor/Chart.yaml +++ b/charts/awskubedbcom-providerconfigusage-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"aws.kubedb.com","version":"v1beta1","resource":"providerconfigusages"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProviderConfigUsage Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: awskubedbcom-providerconfigusage-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/awskubedbcom-providerconfigusage-editor/README.md b/charts/awskubedbcom-providerconfigusage-editor/README.md index 3bc158adfe..9444a61ea0 100644 --- a/charts/awskubedbcom-providerconfigusage-editor/README.md +++ b/charts/awskubedbcom-providerconfigusage-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/awskubedbcom-providerconfigusage-editor --version=v0.38.0 -$ helm upgrade -i awskubedbcom-providerconfigusage-editor appscode/awskubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/awskubedbcom-providerconfigusage-editor --version=v0.39.0 +$ helm upgrade -i awskubedbcom-providerconfigusage-editor appscode/awskubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProviderConfigUsage Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `awskubedbcom-providerconfigusage-editor`: ```bash -$ helm upgrade -i awskubedbcom-providerconfigusage-editor appscode/awskubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i awskubedbcom-providerconfigusage-editor appscode/awskubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProviderConfigUsage Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `awskubedbcom-provi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i awskubedbcom-providerconfigusage-editor appscode/awskubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=aws.kubedb.com/v1beta1 +$ helm upgrade -i awskubedbcom-providerconfigusage-editor appscode/awskubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=aws.kubedb.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i awskubedbcom-providerconfigusage-editor appscode/awskubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i awskubedbcom-providerconfigusage-editor appscode/awskubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/awskubedbcom-storeconfig-editor/Chart.yaml b/charts/awskubedbcom-storeconfig-editor/Chart.yaml index 771bd5c15c..df1d4d0c89 100644 --- a/charts/awskubedbcom-storeconfig-editor/Chart.yaml +++ b/charts/awskubedbcom-storeconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"aws.kubedb.com","version":"v1alpha1","resource":"storeconfigs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: StoreConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: awskubedbcom-storeconfig-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/awskubedbcom-storeconfig-editor/README.md b/charts/awskubedbcom-storeconfig-editor/README.md index 17838da3d7..dc9fc9887b 100644 --- a/charts/awskubedbcom-storeconfig-editor/README.md +++ b/charts/awskubedbcom-storeconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/awskubedbcom-storeconfig-editor --version=v0.38.0 -$ helm upgrade -i awskubedbcom-storeconfig-editor appscode/awskubedbcom-storeconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/awskubedbcom-storeconfig-editor --version=v0.39.0 +$ helm upgrade -i awskubedbcom-storeconfig-editor appscode/awskubedbcom-storeconfig-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a StoreConfig Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `awskubedbcom-storeconfig-editor`: ```bash -$ helm upgrade -i awskubedbcom-storeconfig-editor appscode/awskubedbcom-storeconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i awskubedbcom-storeconfig-editor appscode/awskubedbcom-storeconfig-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a StoreConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `awskubedbcom-store Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i awskubedbcom-storeconfig-editor appscode/awskubedbcom-storeconfig-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=aws.kubedb.com/v1alpha1 +$ helm upgrade -i awskubedbcom-storeconfig-editor appscode/awskubedbcom-storeconfig-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i awskubedbcom-storeconfig-editor appscode/awskubedbcom-storeconfig-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i awskubedbcom-storeconfig-editor appscode/awskubedbcom-storeconfig-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/azurekubedbcom-providerconfig-editor/Chart.yaml b/charts/azurekubedbcom-providerconfig-editor/Chart.yaml index 758cd636fe..e0bffd5e70 100644 --- a/charts/azurekubedbcom-providerconfig-editor/Chart.yaml +++ b/charts/azurekubedbcom-providerconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"azure.kubedb.com","version":"v1beta1","resource":"providerconfigs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProviderConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: azurekubedbcom-providerconfig-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/azurekubedbcom-providerconfig-editor/README.md b/charts/azurekubedbcom-providerconfig-editor/README.md index a8351187d9..216d7e80db 100644 --- a/charts/azurekubedbcom-providerconfig-editor/README.md +++ b/charts/azurekubedbcom-providerconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/azurekubedbcom-providerconfig-editor --version=v0.38.0 -$ helm upgrade -i azurekubedbcom-providerconfig-editor appscode/azurekubedbcom-providerconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/azurekubedbcom-providerconfig-editor --version=v0.39.0 +$ helm upgrade -i azurekubedbcom-providerconfig-editor appscode/azurekubedbcom-providerconfig-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProviderConfig Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `azurekubedbcom-providerconfig-editor`: ```bash -$ helm upgrade -i azurekubedbcom-providerconfig-editor appscode/azurekubedbcom-providerconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i azurekubedbcom-providerconfig-editor appscode/azurekubedbcom-providerconfig-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProviderConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `azurekubedbcom-pro Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i azurekubedbcom-providerconfig-editor appscode/azurekubedbcom-providerconfig-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=azure.kubedb.com/v1beta1 +$ helm upgrade -i azurekubedbcom-providerconfig-editor appscode/azurekubedbcom-providerconfig-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=azure.kubedb.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i azurekubedbcom-providerconfig-editor appscode/azurekubedbcom-providerconfig-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i azurekubedbcom-providerconfig-editor appscode/azurekubedbcom-providerconfig-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/azurekubedbcom-providerconfigusage-editor/Chart.yaml b/charts/azurekubedbcom-providerconfigusage-editor/Chart.yaml index 0980aafa89..b21b755863 100644 --- a/charts/azurekubedbcom-providerconfigusage-editor/Chart.yaml +++ b/charts/azurekubedbcom-providerconfigusage-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"azure.kubedb.com","version":"v1beta1","resource":"providerconfigusages"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProviderConfigUsage Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: azurekubedbcom-providerconfigusage-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/azurekubedbcom-providerconfigusage-editor/README.md b/charts/azurekubedbcom-providerconfigusage-editor/README.md index 5db9ba735b..3f9af16d5b 100644 --- a/charts/azurekubedbcom-providerconfigusage-editor/README.md +++ b/charts/azurekubedbcom-providerconfigusage-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/azurekubedbcom-providerconfigusage-editor --version=v0.38.0 -$ helm upgrade -i azurekubedbcom-providerconfigusage-editor appscode/azurekubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/azurekubedbcom-providerconfigusage-editor --version=v0.39.0 +$ helm upgrade -i azurekubedbcom-providerconfigusage-editor appscode/azurekubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProviderConfigUsage Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `azurekubedbcom-providerconfigusage-editor`: ```bash -$ helm upgrade -i azurekubedbcom-providerconfigusage-editor appscode/azurekubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i azurekubedbcom-providerconfigusage-editor appscode/azurekubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProviderConfigUsage Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `azurekubedbcom-pro Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i azurekubedbcom-providerconfigusage-editor appscode/azurekubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=azure.kubedb.com/v1beta1 +$ helm upgrade -i azurekubedbcom-providerconfigusage-editor appscode/azurekubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=azure.kubedb.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i azurekubedbcom-providerconfigusage-editor appscode/azurekubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i azurekubedbcom-providerconfigusage-editor appscode/azurekubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/azurekubedbcom-providerregistration-editor/Chart.yaml b/charts/azurekubedbcom-providerregistration-editor/Chart.yaml index 7a9f3d7cf8..08620b52a7 100644 --- a/charts/azurekubedbcom-providerregistration-editor/Chart.yaml +++ b/charts/azurekubedbcom-providerregistration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"azure.kubedb.com","version":"v1alpha1","resource":"providerregistrations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProviderRegistration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: azurekubedbcom-providerregistration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/azurekubedbcom-providerregistration-editor/README.md b/charts/azurekubedbcom-providerregistration-editor/README.md index 3ee4325c02..e33cffe59a 100644 --- a/charts/azurekubedbcom-providerregistration-editor/README.md +++ b/charts/azurekubedbcom-providerregistration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/azurekubedbcom-providerregistration-editor --version=v0.38.0 -$ helm upgrade -i azurekubedbcom-providerregistration-editor appscode/azurekubedbcom-providerregistration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/azurekubedbcom-providerregistration-editor --version=v0.39.0 +$ helm upgrade -i azurekubedbcom-providerregistration-editor appscode/azurekubedbcom-providerregistration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProviderRegistration Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `azurekubedbcom-providerregistration-editor`: ```bash -$ helm upgrade -i azurekubedbcom-providerregistration-editor appscode/azurekubedbcom-providerregistration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i azurekubedbcom-providerregistration-editor appscode/azurekubedbcom-providerregistration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProviderRegistration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `azurekubedbcom-pro Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i azurekubedbcom-providerregistration-editor appscode/azurekubedbcom-providerregistration-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=azure.kubedb.com/v1alpha1 +$ helm upgrade -i azurekubedbcom-providerregistration-editor appscode/azurekubedbcom-providerregistration-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i azurekubedbcom-providerregistration-editor appscode/azurekubedbcom-providerregistration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i azurekubedbcom-providerregistration-editor appscode/azurekubedbcom-providerregistration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/azurekubedbcom-resourcegroup-editor/Chart.yaml b/charts/azurekubedbcom-resourcegroup-editor/Chart.yaml index 68b7c9e6c1..64b0a53992 100644 --- a/charts/azurekubedbcom-resourcegroup-editor/Chart.yaml +++ b/charts/azurekubedbcom-resourcegroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"azure.kubedb.com","version":"v1alpha1","resource":"resourcegroups"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ResourceGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: azurekubedbcom-resourcegroup-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/azurekubedbcom-resourcegroup-editor/README.md b/charts/azurekubedbcom-resourcegroup-editor/README.md index 1781cd99b5..cf351a8d71 100644 --- a/charts/azurekubedbcom-resourcegroup-editor/README.md +++ b/charts/azurekubedbcom-resourcegroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/azurekubedbcom-resourcegroup-editor --version=v0.38.0 -$ helm upgrade -i azurekubedbcom-resourcegroup-editor appscode/azurekubedbcom-resourcegroup-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/azurekubedbcom-resourcegroup-editor --version=v0.39.0 +$ helm upgrade -i azurekubedbcom-resourcegroup-editor appscode/azurekubedbcom-resourcegroup-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceGroup Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `azurekubedbcom-resourcegroup-editor`: ```bash -$ helm upgrade -i azurekubedbcom-resourcegroup-editor appscode/azurekubedbcom-resourcegroup-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i azurekubedbcom-resourcegroup-editor appscode/azurekubedbcom-resourcegroup-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ResourceGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `azurekubedbcom-res Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i azurekubedbcom-resourcegroup-editor appscode/azurekubedbcom-resourcegroup-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=azure.kubedb.com/v1alpha1 +$ helm upgrade -i azurekubedbcom-resourcegroup-editor appscode/azurekubedbcom-resourcegroup-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i azurekubedbcom-resourcegroup-editor appscode/azurekubedbcom-resourcegroup-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i azurekubedbcom-resourcegroup-editor appscode/azurekubedbcom-resourcegroup-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/azurekubedbcom-storeconfig-editor/Chart.yaml b/charts/azurekubedbcom-storeconfig-editor/Chart.yaml index 8fd14eb23f..c71b168a67 100644 --- a/charts/azurekubedbcom-storeconfig-editor/Chart.yaml +++ b/charts/azurekubedbcom-storeconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"azure.kubedb.com","version":"v1alpha1","resource":"storeconfigs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: StoreConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: azurekubedbcom-storeconfig-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/azurekubedbcom-storeconfig-editor/README.md b/charts/azurekubedbcom-storeconfig-editor/README.md index ac7ecc6de0..563b8bce83 100644 --- a/charts/azurekubedbcom-storeconfig-editor/README.md +++ b/charts/azurekubedbcom-storeconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/azurekubedbcom-storeconfig-editor --version=v0.38.0 -$ helm upgrade -i azurekubedbcom-storeconfig-editor appscode/azurekubedbcom-storeconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/azurekubedbcom-storeconfig-editor --version=v0.39.0 +$ helm upgrade -i azurekubedbcom-storeconfig-editor appscode/azurekubedbcom-storeconfig-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a StoreConfig Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `azurekubedbcom-storeconfig-editor`: ```bash -$ helm upgrade -i azurekubedbcom-storeconfig-editor appscode/azurekubedbcom-storeconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i azurekubedbcom-storeconfig-editor appscode/azurekubedbcom-storeconfig-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a StoreConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `azurekubedbcom-sto Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i azurekubedbcom-storeconfig-editor appscode/azurekubedbcom-storeconfig-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=azure.kubedb.com/v1alpha1 +$ helm upgrade -i azurekubedbcom-storeconfig-editor appscode/azurekubedbcom-storeconfig-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i azurekubedbcom-storeconfig-editor appscode/azurekubedbcom-storeconfig-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i azurekubedbcom-storeconfig-editor appscode/azurekubedbcom-storeconfig-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/azurekubedbcom-subscription-editor/Chart.yaml b/charts/azurekubedbcom-subscription-editor/Chart.yaml index b459f93688..23ccb59b40 100644 --- a/charts/azurekubedbcom-subscription-editor/Chart.yaml +++ b/charts/azurekubedbcom-subscription-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"azure.kubedb.com","version":"v1alpha1","resource":"subscriptions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Subscription Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: azurekubedbcom-subscription-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/azurekubedbcom-subscription-editor/README.md b/charts/azurekubedbcom-subscription-editor/README.md index be013f3035..8fb1784df6 100644 --- a/charts/azurekubedbcom-subscription-editor/README.md +++ b/charts/azurekubedbcom-subscription-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/azurekubedbcom-subscription-editor --version=v0.38.0 -$ helm upgrade -i azurekubedbcom-subscription-editor appscode/azurekubedbcom-subscription-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/azurekubedbcom-subscription-editor --version=v0.39.0 +$ helm upgrade -i azurekubedbcom-subscription-editor appscode/azurekubedbcom-subscription-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Subscription Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `azurekubedbcom-subscription-editor`: ```bash -$ helm upgrade -i azurekubedbcom-subscription-editor appscode/azurekubedbcom-subscription-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i azurekubedbcom-subscription-editor appscode/azurekubedbcom-subscription-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Subscription Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `azurekubedbcom-sub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i azurekubedbcom-subscription-editor appscode/azurekubedbcom-subscription-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=azure.kubedb.com/v1alpha1 +$ helm upgrade -i azurekubedbcom-subscription-editor appscode/azurekubedbcom-subscription-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i azurekubedbcom-subscription-editor appscode/azurekubedbcom-subscription-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i azurekubedbcom-subscription-editor appscode/azurekubedbcom-subscription-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/batch-cronjob-editor/Chart.yaml b/charts/batch-cronjob-editor/Chart.yaml index c49bc3071b..f72d592291 100644 --- a/charts/batch-cronjob-editor/Chart.yaml +++ b/charts/batch-cronjob-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"batch","version":"v1","resource":"cronjobs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: CronJob Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: batch-cronjob-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/batch-cronjob-editor/README.md b/charts/batch-cronjob-editor/README.md index f00ced4aac..ab7746354c 100644 --- a/charts/batch-cronjob-editor/README.md +++ b/charts/batch-cronjob-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/batch-cronjob-editor --version=v0.38.0 -$ helm upgrade -i batch-cronjob-editor appscode/batch-cronjob-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/batch-cronjob-editor --version=v0.39.0 +$ helm upgrade -i batch-cronjob-editor appscode/batch-cronjob-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CronJob Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `batch-cronjob-editor`: ```bash -$ helm upgrade -i batch-cronjob-editor appscode/batch-cronjob-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i batch-cronjob-editor appscode/batch-cronjob-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a CronJob Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `batch-cronjob-edit Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i batch-cronjob-editor appscode/batch-cronjob-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=batch/v1 +$ helm upgrade -i batch-cronjob-editor appscode/batch-cronjob-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=batch/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i batch-cronjob-editor appscode/batch-cronjob-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i batch-cronjob-editor appscode/batch-cronjob-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/batch-job-editor/Chart.yaml b/charts/batch-job-editor/Chart.yaml index e010781055..e5ab2162ff 100644 --- a/charts/batch-job-editor/Chart.yaml +++ b/charts/batch-job-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"batch","version":"v1","resource":"jobs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Job Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: batch-job-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/batch-job-editor/README.md b/charts/batch-job-editor/README.md index 7d347d13e8..c151efce03 100644 --- a/charts/batch-job-editor/README.md +++ b/charts/batch-job-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/batch-job-editor --version=v0.38.0 -$ helm upgrade -i batch-job-editor appscode/batch-job-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/batch-job-editor --version=v0.39.0 +$ helm upgrade -i batch-job-editor appscode/batch-job-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Job Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `batch-job-editor`: ```bash -$ helm upgrade -i batch-job-editor appscode/batch-job-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i batch-job-editor appscode/batch-job-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Job Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `batch-job-editor` Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i batch-job-editor appscode/batch-job-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=batch/v1 +$ helm upgrade -i batch-job-editor appscode/batch-job-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=batch/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i batch-job-editor appscode/batch-job-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i batch-job-editor appscode/batch-job-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/batch-jobtemplate-editor/Chart.yaml b/charts/batch-jobtemplate-editor/Chart.yaml index 5933340d76..e92e656015 100644 --- a/charts/batch-jobtemplate-editor/Chart.yaml +++ b/charts/batch-jobtemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"batch","version":"v1beta1","resource":"jobtemplates"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: JobTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: batch-jobtemplate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/batch-jobtemplate-editor/README.md b/charts/batch-jobtemplate-editor/README.md index 7df444498d..509267c6ee 100644 --- a/charts/batch-jobtemplate-editor/README.md +++ b/charts/batch-jobtemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/batch-jobtemplate-editor --version=v0.38.0 -$ helm upgrade -i batch-jobtemplate-editor appscode/batch-jobtemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/batch-jobtemplate-editor --version=v0.39.0 +$ helm upgrade -i batch-jobtemplate-editor appscode/batch-jobtemplate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a JobTemplate Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `batch-jobtemplate-editor`: ```bash -$ helm upgrade -i batch-jobtemplate-editor appscode/batch-jobtemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i batch-jobtemplate-editor appscode/batch-jobtemplate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a JobTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `batch-jobtemplate- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i batch-jobtemplate-editor appscode/batch-jobtemplate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=batch/v1beta1 +$ helm upgrade -i batch-jobtemplate-editor appscode/batch-jobtemplate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=batch/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i batch-jobtemplate-editor appscode/batch-jobtemplate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i batch-jobtemplate-editor appscode/batch-jobtemplate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/batchk8sappscodecom-pendingtask-editor/Chart.yaml b/charts/batchk8sappscodecom-pendingtask-editor/Chart.yaml index 6a8b8f7a99..730ad4bb79 100644 --- a/charts/batchk8sappscodecom-pendingtask-editor/Chart.yaml +++ b/charts/batchk8sappscodecom-pendingtask-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"batch.k8s.appscode.com","version":"v1alpha1","resource":"pendingtasks"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PendingTask Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: batchk8sappscodecom-pendingtask-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/batchk8sappscodecom-pendingtask-editor/README.md b/charts/batchk8sappscodecom-pendingtask-editor/README.md index 8ae37bef05..02aa1b8957 100644 --- a/charts/batchk8sappscodecom-pendingtask-editor/README.md +++ b/charts/batchk8sappscodecom-pendingtask-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/batchk8sappscodecom-pendingtask-editor --version=v0.38.0 -$ helm upgrade -i batchk8sappscodecom-pendingtask-editor appscode/batchk8sappscodecom-pendingtask-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/batchk8sappscodecom-pendingtask-editor --version=v0.39.0 +$ helm upgrade -i batchk8sappscodecom-pendingtask-editor appscode/batchk8sappscodecom-pendingtask-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PendingTask Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `batchk8sappscodecom-pendingtask-editor`: ```bash -$ helm upgrade -i batchk8sappscodecom-pendingtask-editor appscode/batchk8sappscodecom-pendingtask-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i batchk8sappscodecom-pendingtask-editor appscode/batchk8sappscodecom-pendingtask-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PendingTask Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `batchk8sappscodeco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i batchk8sappscodecom-pendingtask-editor appscode/batchk8sappscodecom-pendingtask-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=batch.k8s.appscode.com/v1alpha1 +$ helm upgrade -i batchk8sappscodecom-pendingtask-editor appscode/batchk8sappscodecom-pendingtask-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=batch.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i batchk8sappscodecom-pendingtask-editor appscode/batchk8sappscodecom-pendingtask-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i batchk8sappscodecom-pendingtask-editor appscode/batchk8sappscodecom-pendingtask-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/batchk8sappscodecom-taskqueue-editor/Chart.yaml b/charts/batchk8sappscodecom-taskqueue-editor/Chart.yaml index d8a5f67052..891c3ef02f 100644 --- a/charts/batchk8sappscodecom-taskqueue-editor/Chart.yaml +++ b/charts/batchk8sappscodecom-taskqueue-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"batch.k8s.appscode.com","version":"v1alpha1","resource":"taskqueues"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: TaskQueue Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: batchk8sappscodecom-taskqueue-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/batchk8sappscodecom-taskqueue-editor/README.md b/charts/batchk8sappscodecom-taskqueue-editor/README.md index 40e7a021fd..8f7a250c24 100644 --- a/charts/batchk8sappscodecom-taskqueue-editor/README.md +++ b/charts/batchk8sappscodecom-taskqueue-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/batchk8sappscodecom-taskqueue-editor --version=v0.38.0 -$ helm upgrade -i batchk8sappscodecom-taskqueue-editor appscode/batchk8sappscodecom-taskqueue-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/batchk8sappscodecom-taskqueue-editor --version=v0.39.0 +$ helm upgrade -i batchk8sappscodecom-taskqueue-editor appscode/batchk8sappscodecom-taskqueue-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a TaskQueue Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `batchk8sappscodecom-taskqueue-editor`: ```bash -$ helm upgrade -i batchk8sappscodecom-taskqueue-editor appscode/batchk8sappscodecom-taskqueue-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i batchk8sappscodecom-taskqueue-editor appscode/batchk8sappscodecom-taskqueue-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a TaskQueue Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `batchk8sappscodeco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i batchk8sappscodecom-taskqueue-editor appscode/batchk8sappscodecom-taskqueue-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=batch.k8s.appscode.com/v1alpha1 +$ helm upgrade -i batchk8sappscodecom-taskqueue-editor appscode/batchk8sappscodecom-taskqueue-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=batch.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i batchk8sappscodecom-taskqueue-editor appscode/batchk8sappscodecom-taskqueue-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i batchk8sappscodecom-taskqueue-editor appscode/batchk8sappscodecom-taskqueue-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/bootstrapclusterxk8sio-eksconfig-editor/Chart.yaml b/charts/bootstrapclusterxk8sio-eksconfig-editor/Chart.yaml index 4458543d78..066cdfc7c7 100644 --- a/charts/bootstrapclusterxk8sio-eksconfig-editor/Chart.yaml +++ b/charts/bootstrapclusterxk8sio-eksconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"bootstrap.cluster.x-k8s.io","version":"v1beta2","resource":"eksconfigs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: EKSConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: bootstrapclusterxk8sio-eksconfig-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/bootstrapclusterxk8sio-eksconfig-editor/README.md b/charts/bootstrapclusterxk8sio-eksconfig-editor/README.md index 7eab8b1487..73f76ee211 100644 --- a/charts/bootstrapclusterxk8sio-eksconfig-editor/README.md +++ b/charts/bootstrapclusterxk8sio-eksconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/bootstrapclusterxk8sio-eksconfig-editor --version=v0.38.0 -$ helm upgrade -i bootstrapclusterxk8sio-eksconfig-editor appscode/bootstrapclusterxk8sio-eksconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/bootstrapclusterxk8sio-eksconfig-editor --version=v0.39.0 +$ helm upgrade -i bootstrapclusterxk8sio-eksconfig-editor appscode/bootstrapclusterxk8sio-eksconfig-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EKSConfig Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `bootstrapclusterxk8sio-eksconfig-editor`: ```bash -$ helm upgrade -i bootstrapclusterxk8sio-eksconfig-editor appscode/bootstrapclusterxk8sio-eksconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i bootstrapclusterxk8sio-eksconfig-editor appscode/bootstrapclusterxk8sio-eksconfig-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a EKSConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `bootstrapclusterxk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i bootstrapclusterxk8sio-eksconfig-editor appscode/bootstrapclusterxk8sio-eksconfig-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=bootstrap.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i bootstrapclusterxk8sio-eksconfig-editor appscode/bootstrapclusterxk8sio-eksconfig-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=bootstrap.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i bootstrapclusterxk8sio-eksconfig-editor appscode/bootstrapclusterxk8sio-eksconfig-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i bootstrapclusterxk8sio-eksconfig-editor appscode/bootstrapclusterxk8sio-eksconfig-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/bootstrapclusterxk8sio-eksconfigtemplate-editor/Chart.yaml b/charts/bootstrapclusterxk8sio-eksconfigtemplate-editor/Chart.yaml index 5c0c840666..8f5eaa9851 100644 --- a/charts/bootstrapclusterxk8sio-eksconfigtemplate-editor/Chart.yaml +++ b/charts/bootstrapclusterxk8sio-eksconfigtemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"bootstrap.cluster.x-k8s.io","version":"v1beta2","resource":"eksconfigtemplates"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: EKSConfigTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: bootstrapclusterxk8sio-eksconfigtemplate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/bootstrapclusterxk8sio-eksconfigtemplate-editor/README.md b/charts/bootstrapclusterxk8sio-eksconfigtemplate-editor/README.md index 1663b067b5..1493acb0df 100644 --- a/charts/bootstrapclusterxk8sio-eksconfigtemplate-editor/README.md +++ b/charts/bootstrapclusterxk8sio-eksconfigtemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/bootstrapclusterxk8sio-eksconfigtemplate-editor --version=v0.38.0 -$ helm upgrade -i bootstrapclusterxk8sio-eksconfigtemplate-editor appscode/bootstrapclusterxk8sio-eksconfigtemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/bootstrapclusterxk8sio-eksconfigtemplate-editor --version=v0.39.0 +$ helm upgrade -i bootstrapclusterxk8sio-eksconfigtemplate-editor appscode/bootstrapclusterxk8sio-eksconfigtemplate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EKSConfigTemplate Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `bootstrapclusterxk8sio-eksconfigtemplate-editor`: ```bash -$ helm upgrade -i bootstrapclusterxk8sio-eksconfigtemplate-editor appscode/bootstrapclusterxk8sio-eksconfigtemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i bootstrapclusterxk8sio-eksconfigtemplate-editor appscode/bootstrapclusterxk8sio-eksconfigtemplate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a EKSConfigTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `bootstrapclusterxk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i bootstrapclusterxk8sio-eksconfigtemplate-editor appscode/bootstrapclusterxk8sio-eksconfigtemplate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=bootstrap.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i bootstrapclusterxk8sio-eksconfigtemplate-editor appscode/bootstrapclusterxk8sio-eksconfigtemplate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=bootstrap.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i bootstrapclusterxk8sio-eksconfigtemplate-editor appscode/bootstrapclusterxk8sio-eksconfigtemplate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i bootstrapclusterxk8sio-eksconfigtemplate-editor appscode/bootstrapclusterxk8sio-eksconfigtemplate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cacheazurekubedbcom-rediscache-editor/Chart.yaml b/charts/cacheazurekubedbcom-rediscache-editor/Chart.yaml index 978f09c669..8126f3eb9b 100644 --- a/charts/cacheazurekubedbcom-rediscache-editor/Chart.yaml +++ b/charts/cacheazurekubedbcom-rediscache-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cache.azure.kubedb.com","version":"v1alpha1","resource":"rediscaches"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RedisCache Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cacheazurekubedbcom-rediscache-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cacheazurekubedbcom-rediscache-editor/README.md b/charts/cacheazurekubedbcom-rediscache-editor/README.md index b53998ea5d..245aeeb3bb 100644 --- a/charts/cacheazurekubedbcom-rediscache-editor/README.md +++ b/charts/cacheazurekubedbcom-rediscache-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cacheazurekubedbcom-rediscache-editor --version=v0.38.0 -$ helm upgrade -i cacheazurekubedbcom-rediscache-editor appscode/cacheazurekubedbcom-rediscache-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cacheazurekubedbcom-rediscache-editor --version=v0.39.0 +$ helm upgrade -i cacheazurekubedbcom-rediscache-editor appscode/cacheazurekubedbcom-rediscache-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisCache Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `cacheazurekubedbcom-rediscache-editor`: ```bash -$ helm upgrade -i cacheazurekubedbcom-rediscache-editor appscode/cacheazurekubedbcom-rediscache-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cacheazurekubedbcom-rediscache-editor appscode/cacheazurekubedbcom-rediscache-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RedisCache Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cacheazurekubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cacheazurekubedbcom-rediscache-editor appscode/cacheazurekubedbcom-rediscache-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cache.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cacheazurekubedbcom-rediscache-editor appscode/cacheazurekubedbcom-rediscache-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cache.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cacheazurekubedbcom-rediscache-editor appscode/cacheazurekubedbcom-rediscache-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cacheazurekubedbcom-rediscache-editor appscode/cacheazurekubedbcom-rediscache-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cacheazurekubedbcom-redisenterprisecluster-editor/Chart.yaml b/charts/cacheazurekubedbcom-redisenterprisecluster-editor/Chart.yaml index 5fba0f79b1..6b6cfa477e 100644 --- a/charts/cacheazurekubedbcom-redisenterprisecluster-editor/Chart.yaml +++ b/charts/cacheazurekubedbcom-redisenterprisecluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cache.azure.kubedb.com","version":"v1alpha1","resource":"redisenterpriseclusters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RedisEnterpriseCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cacheazurekubedbcom-redisenterprisecluster-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cacheazurekubedbcom-redisenterprisecluster-editor/README.md b/charts/cacheazurekubedbcom-redisenterprisecluster-editor/README.md index 8d0b3acd78..c1f0be94dc 100644 --- a/charts/cacheazurekubedbcom-redisenterprisecluster-editor/README.md +++ b/charts/cacheazurekubedbcom-redisenterprisecluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cacheazurekubedbcom-redisenterprisecluster-editor --version=v0.38.0 -$ helm upgrade -i cacheazurekubedbcom-redisenterprisecluster-editor appscode/cacheazurekubedbcom-redisenterprisecluster-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cacheazurekubedbcom-redisenterprisecluster-editor --version=v0.39.0 +$ helm upgrade -i cacheazurekubedbcom-redisenterprisecluster-editor appscode/cacheazurekubedbcom-redisenterprisecluster-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisEnterpriseCluster Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `cacheazurekubedbcom-redisenterprisecluster-editor`: ```bash -$ helm upgrade -i cacheazurekubedbcom-redisenterprisecluster-editor appscode/cacheazurekubedbcom-redisenterprisecluster-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cacheazurekubedbcom-redisenterprisecluster-editor appscode/cacheazurekubedbcom-redisenterprisecluster-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RedisEnterpriseCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cacheazurekubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cacheazurekubedbcom-redisenterprisecluster-editor appscode/cacheazurekubedbcom-redisenterprisecluster-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cache.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cacheazurekubedbcom-redisenterprisecluster-editor appscode/cacheazurekubedbcom-redisenterprisecluster-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cache.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cacheazurekubedbcom-redisenterprisecluster-editor appscode/cacheazurekubedbcom-redisenterprisecluster-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cacheazurekubedbcom-redisenterprisecluster-editor appscode/cacheazurekubedbcom-redisenterprisecluster-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cacheazurekubedbcom-redisenterprisedatabase-editor/Chart.yaml b/charts/cacheazurekubedbcom-redisenterprisedatabase-editor/Chart.yaml index 6f707e4f29..7a347da388 100644 --- a/charts/cacheazurekubedbcom-redisenterprisedatabase-editor/Chart.yaml +++ b/charts/cacheazurekubedbcom-redisenterprisedatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cache.azure.kubedb.com","version":"v1alpha1","resource":"redisenterprisedatabases"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RedisEnterpriseDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cacheazurekubedbcom-redisenterprisedatabase-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cacheazurekubedbcom-redisenterprisedatabase-editor/README.md b/charts/cacheazurekubedbcom-redisenterprisedatabase-editor/README.md index 5638d524cf..c9b29d64ed 100644 --- a/charts/cacheazurekubedbcom-redisenterprisedatabase-editor/README.md +++ b/charts/cacheazurekubedbcom-redisenterprisedatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cacheazurekubedbcom-redisenterprisedatabase-editor --version=v0.38.0 -$ helm upgrade -i cacheazurekubedbcom-redisenterprisedatabase-editor appscode/cacheazurekubedbcom-redisenterprisedatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cacheazurekubedbcom-redisenterprisedatabase-editor --version=v0.39.0 +$ helm upgrade -i cacheazurekubedbcom-redisenterprisedatabase-editor appscode/cacheazurekubedbcom-redisenterprisedatabase-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisEnterpriseDatabase Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `cacheazurekubedbcom-redisenterprisedatabase-editor`: ```bash -$ helm upgrade -i cacheazurekubedbcom-redisenterprisedatabase-editor appscode/cacheazurekubedbcom-redisenterprisedatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cacheazurekubedbcom-redisenterprisedatabase-editor appscode/cacheazurekubedbcom-redisenterprisedatabase-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RedisEnterpriseDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cacheazurekubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cacheazurekubedbcom-redisenterprisedatabase-editor appscode/cacheazurekubedbcom-redisenterprisedatabase-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cache.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cacheazurekubedbcom-redisenterprisedatabase-editor appscode/cacheazurekubedbcom-redisenterprisedatabase-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cache.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cacheazurekubedbcom-redisenterprisedatabase-editor appscode/cacheazurekubedbcom-redisenterprisedatabase-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cacheazurekubedbcom-redisenterprisedatabase-editor appscode/cacheazurekubedbcom-redisenterprisedatabase-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cacheazurekubedbcom-redisfirewallrule-editor/Chart.yaml b/charts/cacheazurekubedbcom-redisfirewallrule-editor/Chart.yaml index cd9518f5ce..aa4e51f46c 100644 --- a/charts/cacheazurekubedbcom-redisfirewallrule-editor/Chart.yaml +++ b/charts/cacheazurekubedbcom-redisfirewallrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cache.azure.kubedb.com","version":"v1alpha1","resource":"redisfirewallrules"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RedisFirewallRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cacheazurekubedbcom-redisfirewallrule-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cacheazurekubedbcom-redisfirewallrule-editor/README.md b/charts/cacheazurekubedbcom-redisfirewallrule-editor/README.md index 53252aa3d3..bc8b1088d5 100644 --- a/charts/cacheazurekubedbcom-redisfirewallrule-editor/README.md +++ b/charts/cacheazurekubedbcom-redisfirewallrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cacheazurekubedbcom-redisfirewallrule-editor --version=v0.38.0 -$ helm upgrade -i cacheazurekubedbcom-redisfirewallrule-editor appscode/cacheazurekubedbcom-redisfirewallrule-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cacheazurekubedbcom-redisfirewallrule-editor --version=v0.39.0 +$ helm upgrade -i cacheazurekubedbcom-redisfirewallrule-editor appscode/cacheazurekubedbcom-redisfirewallrule-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisFirewallRule Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `cacheazurekubedbcom-redisfirewallrule-editor`: ```bash -$ helm upgrade -i cacheazurekubedbcom-redisfirewallrule-editor appscode/cacheazurekubedbcom-redisfirewallrule-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cacheazurekubedbcom-redisfirewallrule-editor appscode/cacheazurekubedbcom-redisfirewallrule-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RedisFirewallRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cacheazurekubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cacheazurekubedbcom-redisfirewallrule-editor appscode/cacheazurekubedbcom-redisfirewallrule-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cache.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cacheazurekubedbcom-redisfirewallrule-editor appscode/cacheazurekubedbcom-redisfirewallrule-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cache.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cacheazurekubedbcom-redisfirewallrule-editor appscode/cacheazurekubedbcom-redisfirewallrule-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cacheazurekubedbcom-redisfirewallrule-editor appscode/cacheazurekubedbcom-redisfirewallrule-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cacheazurekubedbcom-redislinkedserver-editor/Chart.yaml b/charts/cacheazurekubedbcom-redislinkedserver-editor/Chart.yaml index 8710ca2469..8a85a77e8d 100644 --- a/charts/cacheazurekubedbcom-redislinkedserver-editor/Chart.yaml +++ b/charts/cacheazurekubedbcom-redislinkedserver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cache.azure.kubedb.com","version":"v1alpha1","resource":"redislinkedservers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RedisLinkedServer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cacheazurekubedbcom-redislinkedserver-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cacheazurekubedbcom-redislinkedserver-editor/README.md b/charts/cacheazurekubedbcom-redislinkedserver-editor/README.md index cd5bfdda27..76e1a82139 100644 --- a/charts/cacheazurekubedbcom-redislinkedserver-editor/README.md +++ b/charts/cacheazurekubedbcom-redislinkedserver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cacheazurekubedbcom-redislinkedserver-editor --version=v0.38.0 -$ helm upgrade -i cacheazurekubedbcom-redislinkedserver-editor appscode/cacheazurekubedbcom-redislinkedserver-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cacheazurekubedbcom-redislinkedserver-editor --version=v0.39.0 +$ helm upgrade -i cacheazurekubedbcom-redislinkedserver-editor appscode/cacheazurekubedbcom-redislinkedserver-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisLinkedServer Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `cacheazurekubedbcom-redislinkedserver-editor`: ```bash -$ helm upgrade -i cacheazurekubedbcom-redislinkedserver-editor appscode/cacheazurekubedbcom-redislinkedserver-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cacheazurekubedbcom-redislinkedserver-editor appscode/cacheazurekubedbcom-redislinkedserver-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RedisLinkedServer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cacheazurekubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cacheazurekubedbcom-redislinkedserver-editor appscode/cacheazurekubedbcom-redislinkedserver-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cache.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cacheazurekubedbcom-redislinkedserver-editor appscode/cacheazurekubedbcom-redislinkedserver-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cache.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cacheazurekubedbcom-redislinkedserver-editor appscode/cacheazurekubedbcom-redislinkedserver-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cacheazurekubedbcom-redislinkedserver-editor appscode/cacheazurekubedbcom-redislinkedserver-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-aerospikebinding-editor/Chart.yaml b/charts/catalogappscodecom-aerospikebinding-editor/Chart.yaml index c8054e573f..5ed49e6ad5 100644 --- a/charts/catalogappscodecom-aerospikebinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-aerospikebinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"aerospikebindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AerospikeBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-aerospikebinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-aerospikebinding-editor/README.md b/charts/catalogappscodecom-aerospikebinding-editor/README.md index d15f4dcadf..cf902ed7a8 100644 --- a/charts/catalogappscodecom-aerospikebinding-editor/README.md +++ b/charts/catalogappscodecom-aerospikebinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-aerospikebinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-aerospikebinding-editor appscode/catalogappscodecom-aerospikebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-aerospikebinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-aerospikebinding-editor appscode/catalogappscodecom-aerospikebinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AerospikeBinding Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogappscodecom-aerospikebinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-aerospikebinding-editor appscode/catalogappscodecom-aerospikebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-aerospikebinding-editor appscode/catalogappscodecom-aerospikebinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AerospikeBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-aerospikebinding-editor appscode/catalogappscodecom-aerospikebinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-aerospikebinding-editor appscode/catalogappscodecom-aerospikebinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-aerospikebinding-editor appscode/catalogappscodecom-aerospikebinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-aerospikebinding-editor appscode/catalogappscodecom-aerospikebinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-cassandrabinding-editor/Chart.yaml b/charts/catalogappscodecom-cassandrabinding-editor/Chart.yaml index ca0c762d88..3fb4bc05f0 100644 --- a/charts/catalogappscodecom-cassandrabinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-cassandrabinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"cassandrabindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: CassandraBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-cassandrabinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-cassandrabinding-editor/README.md b/charts/catalogappscodecom-cassandrabinding-editor/README.md index e698d0bccc..72013e8b01 100644 --- a/charts/catalogappscodecom-cassandrabinding-editor/README.md +++ b/charts/catalogappscodecom-cassandrabinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-cassandrabinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-cassandrabinding-editor appscode/catalogappscodecom-cassandrabinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-cassandrabinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-cassandrabinding-editor appscode/catalogappscodecom-cassandrabinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CassandraBinding Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogappscodecom-cassandrabinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-cassandrabinding-editor appscode/catalogappscodecom-cassandrabinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-cassandrabinding-editor appscode/catalogappscodecom-cassandrabinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a CassandraBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-cassandrabinding-editor appscode/catalogappscodecom-cassandrabinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-cassandrabinding-editor appscode/catalogappscodecom-cassandrabinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-cassandrabinding-editor appscode/catalogappscodecom-cassandrabinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-cassandrabinding-editor appscode/catalogappscodecom-cassandrabinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-clickhousebinding-editor/Chart.yaml b/charts/catalogappscodecom-clickhousebinding-editor/Chart.yaml index 8f064595a6..a2dfd8bf8c 100644 --- a/charts/catalogappscodecom-clickhousebinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-clickhousebinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"clickhousebindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClickHouseBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-clickhousebinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-clickhousebinding-editor/README.md b/charts/catalogappscodecom-clickhousebinding-editor/README.md index 9765a092e5..af3db21622 100644 --- a/charts/catalogappscodecom-clickhousebinding-editor/README.md +++ b/charts/catalogappscodecom-clickhousebinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-clickhousebinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-clickhousebinding-editor appscode/catalogappscodecom-clickhousebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-clickhousebinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-clickhousebinding-editor appscode/catalogappscodecom-clickhousebinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClickHouseBinding Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `catalogappscodecom-clickhousebinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-clickhousebinding-editor appscode/catalogappscodecom-clickhousebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-clickhousebinding-editor appscode/catalogappscodecom-clickhousebinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClickHouseBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-clickhousebinding-editor appscode/catalogappscodecom-clickhousebinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-clickhousebinding-editor appscode/catalogappscodecom-clickhousebinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-clickhousebinding-editor appscode/catalogappscodecom-clickhousebinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-clickhousebinding-editor appscode/catalogappscodecom-clickhousebinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-db2binding-editor/Chart.yaml b/charts/catalogappscodecom-db2binding-editor/Chart.yaml index d429a3ba4b..248025087f 100644 --- a/charts/catalogappscodecom-db2binding-editor/Chart.yaml +++ b/charts/catalogappscodecom-db2binding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"db2bindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DB2Binding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-db2binding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-db2binding-editor/README.md b/charts/catalogappscodecom-db2binding-editor/README.md index 4c93e855ee..97f4177cf6 100644 --- a/charts/catalogappscodecom-db2binding-editor/README.md +++ b/charts/catalogappscodecom-db2binding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-db2binding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-db2binding-editor appscode/catalogappscodecom-db2binding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-db2binding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-db2binding-editor appscode/catalogappscodecom-db2binding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DB2Binding Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `catalogappscodecom-db2binding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-db2binding-editor appscode/catalogappscodecom-db2binding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-db2binding-editor appscode/catalogappscodecom-db2binding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DB2Binding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-db2binding-editor appscode/catalogappscodecom-db2binding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-db2binding-editor appscode/catalogappscodecom-db2binding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-db2binding-editor appscode/catalogappscodecom-db2binding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-db2binding-editor appscode/catalogappscodecom-db2binding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-documentdbbinding-editor/Chart.yaml b/charts/catalogappscodecom-documentdbbinding-editor/Chart.yaml index 2d5895457f..1df48a4c9a 100644 --- a/charts/catalogappscodecom-documentdbbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-documentdbbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"documentdbbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DocumentDBBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-documentdbbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-documentdbbinding-editor/README.md b/charts/catalogappscodecom-documentdbbinding-editor/README.md index 6821b8d47c..c42c825f3d 100644 --- a/charts/catalogappscodecom-documentdbbinding-editor/README.md +++ b/charts/catalogappscodecom-documentdbbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-documentdbbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-documentdbbinding-editor appscode/catalogappscodecom-documentdbbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-documentdbbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-documentdbbinding-editor appscode/catalogappscodecom-documentdbbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DocumentDBBinding Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `catalogappscodecom-documentdbbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-documentdbbinding-editor appscode/catalogappscodecom-documentdbbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-documentdbbinding-editor appscode/catalogappscodecom-documentdbbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DocumentDBBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-documentdbbinding-editor appscode/catalogappscodecom-documentdbbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-documentdbbinding-editor appscode/catalogappscodecom-documentdbbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-documentdbbinding-editor appscode/catalogappscodecom-documentdbbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-documentdbbinding-editor appscode/catalogappscodecom-documentdbbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-druidbinding-editor/Chart.yaml b/charts/catalogappscodecom-druidbinding-editor/Chart.yaml index 7569e6e41b..4646ed4443 100644 --- a/charts/catalogappscodecom-druidbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-druidbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"druidbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DruidBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-druidbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-druidbinding-editor/README.md b/charts/catalogappscodecom-druidbinding-editor/README.md index e3cca093c1..e0da999d64 100644 --- a/charts/catalogappscodecom-druidbinding-editor/README.md +++ b/charts/catalogappscodecom-druidbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-druidbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-druidbinding-editor appscode/catalogappscodecom-druidbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-druidbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-druidbinding-editor appscode/catalogappscodecom-druidbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DruidBinding Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogappscodecom-druidbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-druidbinding-editor appscode/catalogappscodecom-druidbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-druidbinding-editor appscode/catalogappscodecom-druidbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DruidBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-druidbinding-editor appscode/catalogappscodecom-druidbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-druidbinding-editor appscode/catalogappscodecom-druidbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-druidbinding-editor appscode/catalogappscodecom-druidbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-druidbinding-editor appscode/catalogappscodecom-druidbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-elasticsearchbinding-editor/Chart.yaml b/charts/catalogappscodecom-elasticsearchbinding-editor/Chart.yaml index e72e8f9cbb..5f312867b4 100644 --- a/charts/catalogappscodecom-elasticsearchbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-elasticsearchbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"elasticsearchbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ElasticsearchBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-elasticsearchbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-elasticsearchbinding-editor/README.md b/charts/catalogappscodecom-elasticsearchbinding-editor/README.md index ab47e5d432..1f0047a67a 100644 --- a/charts/catalogappscodecom-elasticsearchbinding-editor/README.md +++ b/charts/catalogappscodecom-elasticsearchbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-elasticsearchbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-elasticsearchbinding-editor appscode/catalogappscodecom-elasticsearchbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-elasticsearchbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-elasticsearchbinding-editor appscode/catalogappscodecom-elasticsearchbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ElasticsearchBinding Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `catalogappscodecom-elasticsearchbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-elasticsearchbinding-editor appscode/catalogappscodecom-elasticsearchbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-elasticsearchbinding-editor appscode/catalogappscodecom-elasticsearchbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ElasticsearchBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-elasticsearchbinding-editor appscode/catalogappscodecom-elasticsearchbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-elasticsearchbinding-editor appscode/catalogappscodecom-elasticsearchbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-elasticsearchbinding-editor appscode/catalogappscodecom-elasticsearchbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-elasticsearchbinding-editor appscode/catalogappscodecom-elasticsearchbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-hanadbbinding-editor/Chart.yaml b/charts/catalogappscodecom-hanadbbinding-editor/Chart.yaml index c49e294d42..a590146d64 100644 --- a/charts/catalogappscodecom-hanadbbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-hanadbbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"hanadbbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: HanaDBBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-hanadbbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-hanadbbinding-editor/README.md b/charts/catalogappscodecom-hanadbbinding-editor/README.md index ec21506202..cc7ffeed55 100644 --- a/charts/catalogappscodecom-hanadbbinding-editor/README.md +++ b/charts/catalogappscodecom-hanadbbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-hanadbbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-hanadbbinding-editor appscode/catalogappscodecom-hanadbbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-hanadbbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-hanadbbinding-editor appscode/catalogappscodecom-hanadbbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HanaDBBinding Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `catalogappscodecom-hanadbbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-hanadbbinding-editor appscode/catalogappscodecom-hanadbbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-hanadbbinding-editor appscode/catalogappscodecom-hanadbbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a HanaDBBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-hanadbbinding-editor appscode/catalogappscodecom-hanadbbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-hanadbbinding-editor appscode/catalogappscodecom-hanadbbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-hanadbbinding-editor appscode/catalogappscodecom-hanadbbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-hanadbbinding-editor appscode/catalogappscodecom-hanadbbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-hazelcastbinding-editor/Chart.yaml b/charts/catalogappscodecom-hazelcastbinding-editor/Chart.yaml index aa6fe29795..186bfcc1b7 100644 --- a/charts/catalogappscodecom-hazelcastbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-hazelcastbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"hazelcastbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: HazelcastBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-hazelcastbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-hazelcastbinding-editor/README.md b/charts/catalogappscodecom-hazelcastbinding-editor/README.md index fb40db403e..599a933232 100644 --- a/charts/catalogappscodecom-hazelcastbinding-editor/README.md +++ b/charts/catalogappscodecom-hazelcastbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-hazelcastbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-hazelcastbinding-editor appscode/catalogappscodecom-hazelcastbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-hazelcastbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-hazelcastbinding-editor appscode/catalogappscodecom-hazelcastbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HazelcastBinding Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogappscodecom-hazelcastbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-hazelcastbinding-editor appscode/catalogappscodecom-hazelcastbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-hazelcastbinding-editor appscode/catalogappscodecom-hazelcastbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a HazelcastBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-hazelcastbinding-editor appscode/catalogappscodecom-hazelcastbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-hazelcastbinding-editor appscode/catalogappscodecom-hazelcastbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-hazelcastbinding-editor appscode/catalogappscodecom-hazelcastbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-hazelcastbinding-editor appscode/catalogappscodecom-hazelcastbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-ignitebinding-editor/Chart.yaml b/charts/catalogappscodecom-ignitebinding-editor/Chart.yaml index f604ba0e77..379b06b0f4 100644 --- a/charts/catalogappscodecom-ignitebinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-ignitebinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"ignitebindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: IgniteBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-ignitebinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-ignitebinding-editor/README.md b/charts/catalogappscodecom-ignitebinding-editor/README.md index 937340b6fa..8527c7b23f 100644 --- a/charts/catalogappscodecom-ignitebinding-editor/README.md +++ b/charts/catalogappscodecom-ignitebinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-ignitebinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-ignitebinding-editor appscode/catalogappscodecom-ignitebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-ignitebinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-ignitebinding-editor appscode/catalogappscodecom-ignitebinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a IgniteBinding Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `catalogappscodecom-ignitebinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-ignitebinding-editor appscode/catalogappscodecom-ignitebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-ignitebinding-editor appscode/catalogappscodecom-ignitebinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a IgniteBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-ignitebinding-editor appscode/catalogappscodecom-ignitebinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-ignitebinding-editor appscode/catalogappscodecom-ignitebinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-ignitebinding-editor appscode/catalogappscodecom-ignitebinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-ignitebinding-editor appscode/catalogappscodecom-ignitebinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-kafkabinding-editor/Chart.yaml b/charts/catalogappscodecom-kafkabinding-editor/Chart.yaml index ec07da4a4f..361b97e21e 100644 --- a/charts/catalogappscodecom-kafkabinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-kafkabinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"kafkabindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: KafkaBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-kafkabinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-kafkabinding-editor/README.md b/charts/catalogappscodecom-kafkabinding-editor/README.md index 240299be23..8f3316768b 100644 --- a/charts/catalogappscodecom-kafkabinding-editor/README.md +++ b/charts/catalogappscodecom-kafkabinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-kafkabinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-kafkabinding-editor appscode/catalogappscodecom-kafkabinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-kafkabinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-kafkabinding-editor appscode/catalogappscodecom-kafkabinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a KafkaBinding Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogappscodecom-kafkabinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-kafkabinding-editor appscode/catalogappscodecom-kafkabinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-kafkabinding-editor appscode/catalogappscodecom-kafkabinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a KafkaBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-kafkabinding-editor appscode/catalogappscodecom-kafkabinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-kafkabinding-editor appscode/catalogappscodecom-kafkabinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-kafkabinding-editor appscode/catalogappscodecom-kafkabinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-kafkabinding-editor appscode/catalogappscodecom-kafkabinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-mariadbbinding-editor/Chart.yaml b/charts/catalogappscodecom-mariadbbinding-editor/Chart.yaml index bd74a87c34..692f40fb27 100644 --- a/charts/catalogappscodecom-mariadbbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-mariadbbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"mariadbbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MariaDBBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-mariadbbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-mariadbbinding-editor/README.md b/charts/catalogappscodecom-mariadbbinding-editor/README.md index 80228be983..2dee2a927b 100644 --- a/charts/catalogappscodecom-mariadbbinding-editor/README.md +++ b/charts/catalogappscodecom-mariadbbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-mariadbbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-mariadbbinding-editor appscode/catalogappscodecom-mariadbbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-mariadbbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-mariadbbinding-editor appscode/catalogappscodecom-mariadbbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBBinding Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `catalogappscodecom-mariadbbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-mariadbbinding-editor appscode/catalogappscodecom-mariadbbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-mariadbbinding-editor appscode/catalogappscodecom-mariadbbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MariaDBBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-mariadbbinding-editor appscode/catalogappscodecom-mariadbbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-mariadbbinding-editor appscode/catalogappscodecom-mariadbbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-mariadbbinding-editor appscode/catalogappscodecom-mariadbbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-mariadbbinding-editor appscode/catalogappscodecom-mariadbbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-memcachedbinding-editor/Chart.yaml b/charts/catalogappscodecom-memcachedbinding-editor/Chart.yaml index 88262d70a1..cdc14cf2f8 100644 --- a/charts/catalogappscodecom-memcachedbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-memcachedbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"memcachedbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MemcachedBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-memcachedbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-memcachedbinding-editor/README.md b/charts/catalogappscodecom-memcachedbinding-editor/README.md index 88c57e28e6..8e83d7693c 100644 --- a/charts/catalogappscodecom-memcachedbinding-editor/README.md +++ b/charts/catalogappscodecom-memcachedbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-memcachedbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-memcachedbinding-editor appscode/catalogappscodecom-memcachedbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-memcachedbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-memcachedbinding-editor appscode/catalogappscodecom-memcachedbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MemcachedBinding Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogappscodecom-memcachedbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-memcachedbinding-editor appscode/catalogappscodecom-memcachedbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-memcachedbinding-editor appscode/catalogappscodecom-memcachedbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MemcachedBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-memcachedbinding-editor appscode/catalogappscodecom-memcachedbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-memcachedbinding-editor appscode/catalogappscodecom-memcachedbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-memcachedbinding-editor appscode/catalogappscodecom-memcachedbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-memcachedbinding-editor appscode/catalogappscodecom-memcachedbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-milvusbinding-editor/Chart.yaml b/charts/catalogappscodecom-milvusbinding-editor/Chart.yaml index eb6f58b61b..d5bd9c6b7e 100644 --- a/charts/catalogappscodecom-milvusbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-milvusbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"milvusbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MilvusBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-milvusbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-milvusbinding-editor/README.md b/charts/catalogappscodecom-milvusbinding-editor/README.md index dd60bf16be..3163a9e4f9 100644 --- a/charts/catalogappscodecom-milvusbinding-editor/README.md +++ b/charts/catalogappscodecom-milvusbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-milvusbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-milvusbinding-editor appscode/catalogappscodecom-milvusbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-milvusbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-milvusbinding-editor appscode/catalogappscodecom-milvusbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MilvusBinding Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `catalogappscodecom-milvusbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-milvusbinding-editor appscode/catalogappscodecom-milvusbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-milvusbinding-editor appscode/catalogappscodecom-milvusbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MilvusBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-milvusbinding-editor appscode/catalogappscodecom-milvusbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-milvusbinding-editor appscode/catalogappscodecom-milvusbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-milvusbinding-editor appscode/catalogappscodecom-milvusbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-milvusbinding-editor appscode/catalogappscodecom-milvusbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-mongodbbinding-editor/Chart.yaml b/charts/catalogappscodecom-mongodbbinding-editor/Chart.yaml index a8e4e8de42..974bb4be87 100644 --- a/charts/catalogappscodecom-mongodbbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-mongodbbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"mongodbbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MongoDBBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-mongodbbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-mongodbbinding-editor/README.md b/charts/catalogappscodecom-mongodbbinding-editor/README.md index 76c02b2b65..1b7fc520ab 100644 --- a/charts/catalogappscodecom-mongodbbinding-editor/README.md +++ b/charts/catalogappscodecom-mongodbbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-mongodbbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-mongodbbinding-editor appscode/catalogappscodecom-mongodbbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-mongodbbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-mongodbbinding-editor appscode/catalogappscodecom-mongodbbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBBinding Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `catalogappscodecom-mongodbbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-mongodbbinding-editor appscode/catalogappscodecom-mongodbbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-mongodbbinding-editor appscode/catalogappscodecom-mongodbbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MongoDBBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-mongodbbinding-editor appscode/catalogappscodecom-mongodbbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-mongodbbinding-editor appscode/catalogappscodecom-mongodbbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-mongodbbinding-editor appscode/catalogappscodecom-mongodbbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-mongodbbinding-editor appscode/catalogappscodecom-mongodbbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-mssqlserverbinding-editor/Chart.yaml b/charts/catalogappscodecom-mssqlserverbinding-editor/Chart.yaml index 9c9e165e97..1f41fc40b9 100644 --- a/charts/catalogappscodecom-mssqlserverbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-mssqlserverbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"mssqlserverbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLServerBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-mssqlserverbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-mssqlserverbinding-editor/README.md b/charts/catalogappscodecom-mssqlserverbinding-editor/README.md index 70d3a6bf65..88c1d6868e 100644 --- a/charts/catalogappscodecom-mssqlserverbinding-editor/README.md +++ b/charts/catalogappscodecom-mssqlserverbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-mssqlserverbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-mssqlserverbinding-editor appscode/catalogappscodecom-mssqlserverbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-mssqlserverbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-mssqlserverbinding-editor appscode/catalogappscodecom-mssqlserverbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerBinding Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `catalogappscodecom-mssqlserverbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-mssqlserverbinding-editor appscode/catalogappscodecom-mssqlserverbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-mssqlserverbinding-editor appscode/catalogappscodecom-mssqlserverbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLServerBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-mssqlserverbinding-editor appscode/catalogappscodecom-mssqlserverbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-mssqlserverbinding-editor appscode/catalogappscodecom-mssqlserverbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-mssqlserverbinding-editor appscode/catalogappscodecom-mssqlserverbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-mssqlserverbinding-editor appscode/catalogappscodecom-mssqlserverbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-mysqlbinding-editor/Chart.yaml b/charts/catalogappscodecom-mysqlbinding-editor/Chart.yaml index d55b92e443..35ef02bf2e 100644 --- a/charts/catalogappscodecom-mysqlbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-mysqlbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"mysqlbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MySQLBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-mysqlbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-mysqlbinding-editor/README.md b/charts/catalogappscodecom-mysqlbinding-editor/README.md index e9a82f1e70..0305d842c5 100644 --- a/charts/catalogappscodecom-mysqlbinding-editor/README.md +++ b/charts/catalogappscodecom-mysqlbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-mysqlbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-mysqlbinding-editor appscode/catalogappscodecom-mysqlbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-mysqlbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-mysqlbinding-editor appscode/catalogappscodecom-mysqlbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLBinding Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogappscodecom-mysqlbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-mysqlbinding-editor appscode/catalogappscodecom-mysqlbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-mysqlbinding-editor appscode/catalogappscodecom-mysqlbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MySQLBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-mysqlbinding-editor appscode/catalogappscodecom-mysqlbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-mysqlbinding-editor appscode/catalogappscodecom-mysqlbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-mysqlbinding-editor appscode/catalogappscodecom-mysqlbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-mysqlbinding-editor appscode/catalogappscodecom-mysqlbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-neo4jbinding-editor/Chart.yaml b/charts/catalogappscodecom-neo4jbinding-editor/Chart.yaml index 9e2394ad3c..0a84263ce9 100644 --- a/charts/catalogappscodecom-neo4jbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-neo4jbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"neo4jbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Neo4jBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-neo4jbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-neo4jbinding-editor/README.md b/charts/catalogappscodecom-neo4jbinding-editor/README.md index d8657e52e0..8563a147d4 100644 --- a/charts/catalogappscodecom-neo4jbinding-editor/README.md +++ b/charts/catalogappscodecom-neo4jbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-neo4jbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-neo4jbinding-editor appscode/catalogappscodecom-neo4jbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-neo4jbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-neo4jbinding-editor appscode/catalogappscodecom-neo4jbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Neo4jBinding Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogappscodecom-neo4jbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-neo4jbinding-editor appscode/catalogappscodecom-neo4jbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-neo4jbinding-editor appscode/catalogappscodecom-neo4jbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Neo4jBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-neo4jbinding-editor appscode/catalogappscodecom-neo4jbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-neo4jbinding-editor appscode/catalogappscodecom-neo4jbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-neo4jbinding-editor appscode/catalogappscodecom-neo4jbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-neo4jbinding-editor appscode/catalogappscodecom-neo4jbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-oraclebinding-editor/Chart.yaml b/charts/catalogappscodecom-oraclebinding-editor/Chart.yaml index ab7776dd40..287a718674 100644 --- a/charts/catalogappscodecom-oraclebinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-oraclebinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"oraclebindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: OracleBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-oraclebinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-oraclebinding-editor/README.md b/charts/catalogappscodecom-oraclebinding-editor/README.md index 799cb9cd96..3c1643a0f7 100644 --- a/charts/catalogappscodecom-oraclebinding-editor/README.md +++ b/charts/catalogappscodecom-oraclebinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-oraclebinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-oraclebinding-editor appscode/catalogappscodecom-oraclebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-oraclebinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-oraclebinding-editor appscode/catalogappscodecom-oraclebinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a OracleBinding Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `catalogappscodecom-oraclebinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-oraclebinding-editor appscode/catalogappscodecom-oraclebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-oraclebinding-editor appscode/catalogappscodecom-oraclebinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a OracleBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-oraclebinding-editor appscode/catalogappscodecom-oraclebinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-oraclebinding-editor appscode/catalogappscodecom-oraclebinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-oraclebinding-editor appscode/catalogappscodecom-oraclebinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-oraclebinding-editor appscode/catalogappscodecom-oraclebinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-perconaxtradbbinding-editor/Chart.yaml b/charts/catalogappscodecom-perconaxtradbbinding-editor/Chart.yaml index 95aa68373b..f85eced5b0 100644 --- a/charts/catalogappscodecom-perconaxtradbbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-perconaxtradbbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"perconaxtradbbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PerconaXtraDBBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-perconaxtradbbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-perconaxtradbbinding-editor/README.md b/charts/catalogappscodecom-perconaxtradbbinding-editor/README.md index 7a41444e8f..af271400b3 100644 --- a/charts/catalogappscodecom-perconaxtradbbinding-editor/README.md +++ b/charts/catalogappscodecom-perconaxtradbbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-perconaxtradbbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-perconaxtradbbinding-editor appscode/catalogappscodecom-perconaxtradbbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-perconaxtradbbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-perconaxtradbbinding-editor appscode/catalogappscodecom-perconaxtradbbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PerconaXtraDBBinding Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `catalogappscodecom-perconaxtradbbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-perconaxtradbbinding-editor appscode/catalogappscodecom-perconaxtradbbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-perconaxtradbbinding-editor appscode/catalogappscodecom-perconaxtradbbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PerconaXtraDBBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-perconaxtradbbinding-editor appscode/catalogappscodecom-perconaxtradbbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-perconaxtradbbinding-editor appscode/catalogappscodecom-perconaxtradbbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-perconaxtradbbinding-editor appscode/catalogappscodecom-perconaxtradbbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-perconaxtradbbinding-editor appscode/catalogappscodecom-perconaxtradbbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-pgbouncerbinding-editor/Chart.yaml b/charts/catalogappscodecom-pgbouncerbinding-editor/Chart.yaml index 68ea5cacd5..c97b03db05 100644 --- a/charts/catalogappscodecom-pgbouncerbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-pgbouncerbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"pgbouncerbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PgBouncerBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-pgbouncerbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-pgbouncerbinding-editor/README.md b/charts/catalogappscodecom-pgbouncerbinding-editor/README.md index 91b7b9cde4..235b5fc17f 100644 --- a/charts/catalogappscodecom-pgbouncerbinding-editor/README.md +++ b/charts/catalogappscodecom-pgbouncerbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-pgbouncerbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-pgbouncerbinding-editor appscode/catalogappscodecom-pgbouncerbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-pgbouncerbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-pgbouncerbinding-editor appscode/catalogappscodecom-pgbouncerbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncerBinding Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogappscodecom-pgbouncerbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-pgbouncerbinding-editor appscode/catalogappscodecom-pgbouncerbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-pgbouncerbinding-editor appscode/catalogappscodecom-pgbouncerbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PgBouncerBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-pgbouncerbinding-editor appscode/catalogappscodecom-pgbouncerbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-pgbouncerbinding-editor appscode/catalogappscodecom-pgbouncerbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-pgbouncerbinding-editor appscode/catalogappscodecom-pgbouncerbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-pgbouncerbinding-editor appscode/catalogappscodecom-pgbouncerbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-pgpoolbinding-editor/Chart.yaml b/charts/catalogappscodecom-pgpoolbinding-editor/Chart.yaml index f1db862f2d..2f3c010a04 100644 --- a/charts/catalogappscodecom-pgpoolbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-pgpoolbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"pgpoolbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PgpoolBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-pgpoolbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-pgpoolbinding-editor/README.md b/charts/catalogappscodecom-pgpoolbinding-editor/README.md index ce2c99505f..1248008c42 100644 --- a/charts/catalogappscodecom-pgpoolbinding-editor/README.md +++ b/charts/catalogappscodecom-pgpoolbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-pgpoolbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-pgpoolbinding-editor appscode/catalogappscodecom-pgpoolbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-pgpoolbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-pgpoolbinding-editor appscode/catalogappscodecom-pgpoolbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgpoolBinding Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `catalogappscodecom-pgpoolbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-pgpoolbinding-editor appscode/catalogappscodecom-pgpoolbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-pgpoolbinding-editor appscode/catalogappscodecom-pgpoolbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PgpoolBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-pgpoolbinding-editor appscode/catalogappscodecom-pgpoolbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-pgpoolbinding-editor appscode/catalogappscodecom-pgpoolbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-pgpoolbinding-editor appscode/catalogappscodecom-pgpoolbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-pgpoolbinding-editor appscode/catalogappscodecom-pgpoolbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-postgresbinding-editor/Chart.yaml b/charts/catalogappscodecom-postgresbinding-editor/Chart.yaml index 5d4dd2674c..0eff590c5d 100644 --- a/charts/catalogappscodecom-postgresbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-postgresbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"postgresbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PostgresBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-postgresbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-postgresbinding-editor/README.md b/charts/catalogappscodecom-postgresbinding-editor/README.md index ea3341b934..da2585dfb5 100644 --- a/charts/catalogappscodecom-postgresbinding-editor/README.md +++ b/charts/catalogappscodecom-postgresbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-postgresbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-postgresbinding-editor appscode/catalogappscodecom-postgresbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-postgresbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-postgresbinding-editor appscode/catalogappscodecom-postgresbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresBinding Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `catalogappscodecom-postgresbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-postgresbinding-editor appscode/catalogappscodecom-postgresbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-postgresbinding-editor appscode/catalogappscodecom-postgresbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PostgresBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-postgresbinding-editor appscode/catalogappscodecom-postgresbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-postgresbinding-editor appscode/catalogappscodecom-postgresbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-postgresbinding-editor appscode/catalogappscodecom-postgresbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-postgresbinding-editor appscode/catalogappscodecom-postgresbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-proxysqlbinding-editor/Chart.yaml b/charts/catalogappscodecom-proxysqlbinding-editor/Chart.yaml index 56212d4198..786113fce7 100644 --- a/charts/catalogappscodecom-proxysqlbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-proxysqlbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"proxysqlbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProxySQLBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-proxysqlbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-proxysqlbinding-editor/README.md b/charts/catalogappscodecom-proxysqlbinding-editor/README.md index bfaa064ea4..869ef181f0 100644 --- a/charts/catalogappscodecom-proxysqlbinding-editor/README.md +++ b/charts/catalogappscodecom-proxysqlbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-proxysqlbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-proxysqlbinding-editor appscode/catalogappscodecom-proxysqlbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-proxysqlbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-proxysqlbinding-editor appscode/catalogappscodecom-proxysqlbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQLBinding Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `catalogappscodecom-proxysqlbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-proxysqlbinding-editor appscode/catalogappscodecom-proxysqlbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-proxysqlbinding-editor appscode/catalogappscodecom-proxysqlbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProxySQLBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-proxysqlbinding-editor appscode/catalogappscodecom-proxysqlbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-proxysqlbinding-editor appscode/catalogappscodecom-proxysqlbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-proxysqlbinding-editor appscode/catalogappscodecom-proxysqlbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-proxysqlbinding-editor appscode/catalogappscodecom-proxysqlbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-qdrantbinding-editor/Chart.yaml b/charts/catalogappscodecom-qdrantbinding-editor/Chart.yaml index f8140bcb76..346b20c7e5 100644 --- a/charts/catalogappscodecom-qdrantbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-qdrantbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"qdrantbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: QdrantBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-qdrantbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-qdrantbinding-editor/README.md b/charts/catalogappscodecom-qdrantbinding-editor/README.md index 3887190b8d..09260ea1a0 100644 --- a/charts/catalogappscodecom-qdrantbinding-editor/README.md +++ b/charts/catalogappscodecom-qdrantbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-qdrantbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-qdrantbinding-editor appscode/catalogappscodecom-qdrantbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-qdrantbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-qdrantbinding-editor appscode/catalogappscodecom-qdrantbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a QdrantBinding Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `catalogappscodecom-qdrantbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-qdrantbinding-editor appscode/catalogappscodecom-qdrantbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-qdrantbinding-editor appscode/catalogappscodecom-qdrantbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a QdrantBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-qdrantbinding-editor appscode/catalogappscodecom-qdrantbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-qdrantbinding-editor appscode/catalogappscodecom-qdrantbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-qdrantbinding-editor appscode/catalogappscodecom-qdrantbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-qdrantbinding-editor appscode/catalogappscodecom-qdrantbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-rabbitmqbinding-editor/Chart.yaml b/charts/catalogappscodecom-rabbitmqbinding-editor/Chart.yaml index ef57d41c48..9a7f262470 100644 --- a/charts/catalogappscodecom-rabbitmqbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-rabbitmqbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"rabbitmqbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RabbitMQBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-rabbitmqbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-rabbitmqbinding-editor/README.md b/charts/catalogappscodecom-rabbitmqbinding-editor/README.md index 5bcfac20b0..788c6f9afb 100644 --- a/charts/catalogappscodecom-rabbitmqbinding-editor/README.md +++ b/charts/catalogappscodecom-rabbitmqbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-rabbitmqbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-rabbitmqbinding-editor appscode/catalogappscodecom-rabbitmqbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-rabbitmqbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-rabbitmqbinding-editor appscode/catalogappscodecom-rabbitmqbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RabbitMQBinding Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `catalogappscodecom-rabbitmqbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-rabbitmqbinding-editor appscode/catalogappscodecom-rabbitmqbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-rabbitmqbinding-editor appscode/catalogappscodecom-rabbitmqbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RabbitMQBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-rabbitmqbinding-editor appscode/catalogappscodecom-rabbitmqbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-rabbitmqbinding-editor appscode/catalogappscodecom-rabbitmqbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-rabbitmqbinding-editor appscode/catalogappscodecom-rabbitmqbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-rabbitmqbinding-editor appscode/catalogappscodecom-rabbitmqbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-redisbinding-editor/Chart.yaml b/charts/catalogappscodecom-redisbinding-editor/Chart.yaml index 4b6ad7437e..13f6b790a3 100644 --- a/charts/catalogappscodecom-redisbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-redisbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"redisbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RedisBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-redisbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-redisbinding-editor/README.md b/charts/catalogappscodecom-redisbinding-editor/README.md index 9b15b892ae..3204bb1f06 100644 --- a/charts/catalogappscodecom-redisbinding-editor/README.md +++ b/charts/catalogappscodecom-redisbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-redisbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-redisbinding-editor appscode/catalogappscodecom-redisbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-redisbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-redisbinding-editor appscode/catalogappscodecom-redisbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisBinding Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogappscodecom-redisbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-redisbinding-editor appscode/catalogappscodecom-redisbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-redisbinding-editor appscode/catalogappscodecom-redisbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RedisBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-redisbinding-editor appscode/catalogappscodecom-redisbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-redisbinding-editor appscode/catalogappscodecom-redisbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-redisbinding-editor appscode/catalogappscodecom-redisbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-redisbinding-editor appscode/catalogappscodecom-redisbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-singlestorebinding-editor/Chart.yaml b/charts/catalogappscodecom-singlestorebinding-editor/Chart.yaml index bb7dd97958..ed43a55e44 100644 --- a/charts/catalogappscodecom-singlestorebinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-singlestorebinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"singlestorebindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SinglestoreBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-singlestorebinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-singlestorebinding-editor/README.md b/charts/catalogappscodecom-singlestorebinding-editor/README.md index 9c9b5ce850..cfbc0f822a 100644 --- a/charts/catalogappscodecom-singlestorebinding-editor/README.md +++ b/charts/catalogappscodecom-singlestorebinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-singlestorebinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-singlestorebinding-editor appscode/catalogappscodecom-singlestorebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-singlestorebinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-singlestorebinding-editor appscode/catalogappscodecom-singlestorebinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SinglestoreBinding Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `catalogappscodecom-singlestorebinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-singlestorebinding-editor appscode/catalogappscodecom-singlestorebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-singlestorebinding-editor appscode/catalogappscodecom-singlestorebinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SinglestoreBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-singlestorebinding-editor appscode/catalogappscodecom-singlestorebinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-singlestorebinding-editor appscode/catalogappscodecom-singlestorebinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-singlestorebinding-editor appscode/catalogappscodecom-singlestorebinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-singlestorebinding-editor appscode/catalogappscodecom-singlestorebinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-solrbinding-editor/Chart.yaml b/charts/catalogappscodecom-solrbinding-editor/Chart.yaml index 3d595aaccf..b8018c40eb 100644 --- a/charts/catalogappscodecom-solrbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-solrbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"solrbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SolrBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-solrbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-solrbinding-editor/README.md b/charts/catalogappscodecom-solrbinding-editor/README.md index cdef65a8b9..32a78acb37 100644 --- a/charts/catalogappscodecom-solrbinding-editor/README.md +++ b/charts/catalogappscodecom-solrbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-solrbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-solrbinding-editor appscode/catalogappscodecom-solrbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-solrbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-solrbinding-editor appscode/catalogappscodecom-solrbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SolrBinding Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogappscodecom-solrbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-solrbinding-editor appscode/catalogappscodecom-solrbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-solrbinding-editor appscode/catalogappscodecom-solrbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SolrBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-solrbinding-editor appscode/catalogappscodecom-solrbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-solrbinding-editor appscode/catalogappscodecom-solrbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-solrbinding-editor appscode/catalogappscodecom-solrbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-solrbinding-editor appscode/catalogappscodecom-solrbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-weaviatebinding-editor/Chart.yaml b/charts/catalogappscodecom-weaviatebinding-editor/Chart.yaml index bc2a182970..a410261acb 100644 --- a/charts/catalogappscodecom-weaviatebinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-weaviatebinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"weaviatebindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: WeaviateBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-weaviatebinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-weaviatebinding-editor/README.md b/charts/catalogappscodecom-weaviatebinding-editor/README.md index 18f9e9cde9..cecb2ac4ae 100644 --- a/charts/catalogappscodecom-weaviatebinding-editor/README.md +++ b/charts/catalogappscodecom-weaviatebinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-weaviatebinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-weaviatebinding-editor appscode/catalogappscodecom-weaviatebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-weaviatebinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-weaviatebinding-editor appscode/catalogappscodecom-weaviatebinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a WeaviateBinding Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `catalogappscodecom-weaviatebinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-weaviatebinding-editor appscode/catalogappscodecom-weaviatebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-weaviatebinding-editor appscode/catalogappscodecom-weaviatebinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a WeaviateBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-weaviatebinding-editor appscode/catalogappscodecom-weaviatebinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-weaviatebinding-editor appscode/catalogappscodecom-weaviatebinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-weaviatebinding-editor appscode/catalogappscodecom-weaviatebinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-weaviatebinding-editor appscode/catalogappscodecom-weaviatebinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-zookeeperbinding-editor/Chart.yaml b/charts/catalogappscodecom-zookeeperbinding-editor/Chart.yaml index 26ae4043c6..0a84f67fd0 100644 --- a/charts/catalogappscodecom-zookeeperbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-zookeeperbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"zookeeperbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ZooKeeperBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-zookeeperbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogappscodecom-zookeeperbinding-editor/README.md b/charts/catalogappscodecom-zookeeperbinding-editor/README.md index 9df060d030..a819a5a824 100644 --- a/charts/catalogappscodecom-zookeeperbinding-editor/README.md +++ b/charts/catalogappscodecom-zookeeperbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-zookeeperbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogappscodecom-zookeeperbinding-editor appscode/catalogappscodecom-zookeeperbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogappscodecom-zookeeperbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogappscodecom-zookeeperbinding-editor appscode/catalogappscodecom-zookeeperbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ZooKeeperBinding Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogappscodecom-zookeeperbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-zookeeperbinding-editor appscode/catalogappscodecom-zookeeperbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogappscodecom-zookeeperbinding-editor appscode/catalogappscodecom-zookeeperbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ZooKeeperBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-zookeeperbinding-editor appscode/catalogappscodecom-zookeeperbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-zookeeperbinding-editor appscode/catalogappscodecom-zookeeperbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-zookeeperbinding-editor appscode/catalogappscodecom-zookeeperbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-zookeeperbinding-editor appscode/catalogappscodecom-zookeeperbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-aerospikeversion-editor/Chart.yaml b/charts/catalogkubedbcom-aerospikeversion-editor/Chart.yaml index f1f6cdfe2f..58e86e8aa2 100644 --- a/charts/catalogkubedbcom-aerospikeversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-aerospikeversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"aerospikeversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AerospikeVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-aerospikeversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-aerospikeversion-editor/README.md b/charts/catalogkubedbcom-aerospikeversion-editor/README.md index 3a51c6d15b..2c54fcb299 100644 --- a/charts/catalogkubedbcom-aerospikeversion-editor/README.md +++ b/charts/catalogkubedbcom-aerospikeversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-aerospikeversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-aerospikeversion-editor appscode/catalogkubedbcom-aerospikeversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-aerospikeversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-aerospikeversion-editor appscode/catalogkubedbcom-aerospikeversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AerospikeVersion Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogkubedbcom-aerospikeversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-aerospikeversion-editor appscode/catalogkubedbcom-aerospikeversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-aerospikeversion-editor appscode/catalogkubedbcom-aerospikeversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AerospikeVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-a Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-aerospikeversion-editor appscode/catalogkubedbcom-aerospikeversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-aerospikeversion-editor appscode/catalogkubedbcom-aerospikeversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-aerospikeversion-editor appscode/catalogkubedbcom-aerospikeversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-aerospikeversion-editor appscode/catalogkubedbcom-aerospikeversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-cassandraversion-editor/Chart.yaml b/charts/catalogkubedbcom-cassandraversion-editor/Chart.yaml index 6dbb2114a6..b16b64f143 100644 --- a/charts/catalogkubedbcom-cassandraversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-cassandraversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"cassandraversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: CassandraVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-cassandraversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-cassandraversion-editor/README.md b/charts/catalogkubedbcom-cassandraversion-editor/README.md index 60a900dc29..4a94418e9c 100644 --- a/charts/catalogkubedbcom-cassandraversion-editor/README.md +++ b/charts/catalogkubedbcom-cassandraversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-cassandraversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-cassandraversion-editor appscode/catalogkubedbcom-cassandraversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-cassandraversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-cassandraversion-editor appscode/catalogkubedbcom-cassandraversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CassandraVersion Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogkubedbcom-cassandraversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-cassandraversion-editor appscode/catalogkubedbcom-cassandraversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-cassandraversion-editor appscode/catalogkubedbcom-cassandraversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a CassandraVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-c Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-cassandraversion-editor appscode/catalogkubedbcom-cassandraversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-cassandraversion-editor appscode/catalogkubedbcom-cassandraversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-cassandraversion-editor appscode/catalogkubedbcom-cassandraversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-cassandraversion-editor appscode/catalogkubedbcom-cassandraversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-clickhouseversion-editor/Chart.yaml b/charts/catalogkubedbcom-clickhouseversion-editor/Chart.yaml index d3b3c300c2..c3493f4bf6 100644 --- a/charts/catalogkubedbcom-clickhouseversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-clickhouseversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"clickhouseversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClickHouseVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-clickhouseversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-clickhouseversion-editor/README.md b/charts/catalogkubedbcom-clickhouseversion-editor/README.md index dc0c4b6839..6759f049b2 100644 --- a/charts/catalogkubedbcom-clickhouseversion-editor/README.md +++ b/charts/catalogkubedbcom-clickhouseversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-clickhouseversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-clickhouseversion-editor appscode/catalogkubedbcom-clickhouseversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-clickhouseversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-clickhouseversion-editor appscode/catalogkubedbcom-clickhouseversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClickHouseVersion Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `catalogkubedbcom-clickhouseversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-clickhouseversion-editor appscode/catalogkubedbcom-clickhouseversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-clickhouseversion-editor appscode/catalogkubedbcom-clickhouseversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClickHouseVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-c Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-clickhouseversion-editor appscode/catalogkubedbcom-clickhouseversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-clickhouseversion-editor appscode/catalogkubedbcom-clickhouseversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-clickhouseversion-editor appscode/catalogkubedbcom-clickhouseversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-clickhouseversion-editor appscode/catalogkubedbcom-clickhouseversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-db2version-editor/Chart.yaml b/charts/catalogkubedbcom-db2version-editor/Chart.yaml index 9c97814ad1..2b5f200821 100644 --- a/charts/catalogkubedbcom-db2version-editor/Chart.yaml +++ b/charts/catalogkubedbcom-db2version-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"db2versions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DB2Version Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-db2version-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-db2version-editor/README.md b/charts/catalogkubedbcom-db2version-editor/README.md index 80fc2d7e17..df504b2d61 100644 --- a/charts/catalogkubedbcom-db2version-editor/README.md +++ b/charts/catalogkubedbcom-db2version-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-db2version-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-db2version-editor appscode/catalogkubedbcom-db2version-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-db2version-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-db2version-editor appscode/catalogkubedbcom-db2version-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DB2Version Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `catalogkubedbcom-db2version-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-db2version-editor appscode/catalogkubedbcom-db2version-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-db2version-editor appscode/catalogkubedbcom-db2version-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DB2Version Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-d Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-db2version-editor appscode/catalogkubedbcom-db2version-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-db2version-editor appscode/catalogkubedbcom-db2version-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-db2version-editor appscode/catalogkubedbcom-db2version-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-db2version-editor appscode/catalogkubedbcom-db2version-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-documentdbversion-editor/Chart.yaml b/charts/catalogkubedbcom-documentdbversion-editor/Chart.yaml index 97c2a1c4a8..9f1e0c4a3e 100644 --- a/charts/catalogkubedbcom-documentdbversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-documentdbversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"documentdbversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DocumentDBVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-documentdbversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-documentdbversion-editor/README.md b/charts/catalogkubedbcom-documentdbversion-editor/README.md index 2000119166..5c54a71319 100644 --- a/charts/catalogkubedbcom-documentdbversion-editor/README.md +++ b/charts/catalogkubedbcom-documentdbversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-documentdbversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-documentdbversion-editor appscode/catalogkubedbcom-documentdbversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-documentdbversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-documentdbversion-editor appscode/catalogkubedbcom-documentdbversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DocumentDBVersion Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `catalogkubedbcom-documentdbversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-documentdbversion-editor appscode/catalogkubedbcom-documentdbversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-documentdbversion-editor appscode/catalogkubedbcom-documentdbversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DocumentDBVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-d Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-documentdbversion-editor appscode/catalogkubedbcom-documentdbversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-documentdbversion-editor appscode/catalogkubedbcom-documentdbversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-documentdbversion-editor appscode/catalogkubedbcom-documentdbversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-documentdbversion-editor appscode/catalogkubedbcom-documentdbversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-druidversion-editor/Chart.yaml b/charts/catalogkubedbcom-druidversion-editor/Chart.yaml index 53e119f52e..099cece26b 100644 --- a/charts/catalogkubedbcom-druidversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-druidversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"druidversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DruidVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-druidversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-druidversion-editor/README.md b/charts/catalogkubedbcom-druidversion-editor/README.md index 417c38bcc5..e93599499e 100644 --- a/charts/catalogkubedbcom-druidversion-editor/README.md +++ b/charts/catalogkubedbcom-druidversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-druidversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-druidversion-editor appscode/catalogkubedbcom-druidversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-druidversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-druidversion-editor appscode/catalogkubedbcom-druidversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DruidVersion Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogkubedbcom-druidversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-druidversion-editor appscode/catalogkubedbcom-druidversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-druidversion-editor appscode/catalogkubedbcom-druidversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DruidVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-d Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-druidversion-editor appscode/catalogkubedbcom-druidversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-druidversion-editor appscode/catalogkubedbcom-druidversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-druidversion-editor appscode/catalogkubedbcom-druidversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-druidversion-editor appscode/catalogkubedbcom-druidversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-elasticsearchversion-editor/Chart.yaml b/charts/catalogkubedbcom-elasticsearchversion-editor/Chart.yaml index c68b3ea688..5eb67564b5 100644 --- a/charts/catalogkubedbcom-elasticsearchversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-elasticsearchversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"elasticsearchversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ElasticsearchVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-elasticsearchversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-elasticsearchversion-editor/README.md b/charts/catalogkubedbcom-elasticsearchversion-editor/README.md index 1252d7e4cf..736e364298 100644 --- a/charts/catalogkubedbcom-elasticsearchversion-editor/README.md +++ b/charts/catalogkubedbcom-elasticsearchversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-elasticsearchversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-elasticsearchversion-editor appscode/catalogkubedbcom-elasticsearchversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-elasticsearchversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-elasticsearchversion-editor appscode/catalogkubedbcom-elasticsearchversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ElasticsearchVersion Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `catalogkubedbcom-elasticsearchversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-elasticsearchversion-editor appscode/catalogkubedbcom-elasticsearchversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-elasticsearchversion-editor appscode/catalogkubedbcom-elasticsearchversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ElasticsearchVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-elasticsearchversion-editor appscode/catalogkubedbcom-elasticsearchversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-elasticsearchversion-editor appscode/catalogkubedbcom-elasticsearchversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-elasticsearchversion-editor appscode/catalogkubedbcom-elasticsearchversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-elasticsearchversion-editor appscode/catalogkubedbcom-elasticsearchversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-etcdversion-editor/Chart.yaml b/charts/catalogkubedbcom-etcdversion-editor/Chart.yaml index dff95255a0..3c0eecbdd9 100644 --- a/charts/catalogkubedbcom-etcdversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-etcdversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"etcdversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: EtcdVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-etcdversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-etcdversion-editor/README.md b/charts/catalogkubedbcom-etcdversion-editor/README.md index 74972b44b9..4b89d758df 100644 --- a/charts/catalogkubedbcom-etcdversion-editor/README.md +++ b/charts/catalogkubedbcom-etcdversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-etcdversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-etcdversion-editor appscode/catalogkubedbcom-etcdversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-etcdversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-etcdversion-editor appscode/catalogkubedbcom-etcdversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EtcdVersion Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogkubedbcom-etcdversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-etcdversion-editor appscode/catalogkubedbcom-etcdversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-etcdversion-editor appscode/catalogkubedbcom-etcdversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a EtcdVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-etcdversion-editor appscode/catalogkubedbcom-etcdversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-etcdversion-editor appscode/catalogkubedbcom-etcdversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-etcdversion-editor appscode/catalogkubedbcom-etcdversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-etcdversion-editor appscode/catalogkubedbcom-etcdversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-hanadbversion-editor/Chart.yaml b/charts/catalogkubedbcom-hanadbversion-editor/Chart.yaml index 7a2c881fc5..069333e62e 100644 --- a/charts/catalogkubedbcom-hanadbversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-hanadbversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"hanadbversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: HanaDBVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-hanadbversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-hanadbversion-editor/README.md b/charts/catalogkubedbcom-hanadbversion-editor/README.md index 5fc42a4d25..78019a7c64 100644 --- a/charts/catalogkubedbcom-hanadbversion-editor/README.md +++ b/charts/catalogkubedbcom-hanadbversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-hanadbversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-hanadbversion-editor appscode/catalogkubedbcom-hanadbversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-hanadbversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-hanadbversion-editor appscode/catalogkubedbcom-hanadbversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HanaDBVersion Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `catalogkubedbcom-hanadbversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-hanadbversion-editor appscode/catalogkubedbcom-hanadbversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-hanadbversion-editor appscode/catalogkubedbcom-hanadbversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a HanaDBVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-h Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-hanadbversion-editor appscode/catalogkubedbcom-hanadbversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-hanadbversion-editor appscode/catalogkubedbcom-hanadbversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-hanadbversion-editor appscode/catalogkubedbcom-hanadbversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-hanadbversion-editor appscode/catalogkubedbcom-hanadbversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-hazelcastversion-editor/Chart.yaml b/charts/catalogkubedbcom-hazelcastversion-editor/Chart.yaml index cbb05c9bb1..f04f0e52e6 100644 --- a/charts/catalogkubedbcom-hazelcastversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-hazelcastversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"hazelcastversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: HazelcastVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-hazelcastversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-hazelcastversion-editor/README.md b/charts/catalogkubedbcom-hazelcastversion-editor/README.md index 8249eaa177..3184f2546e 100644 --- a/charts/catalogkubedbcom-hazelcastversion-editor/README.md +++ b/charts/catalogkubedbcom-hazelcastversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-hazelcastversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-hazelcastversion-editor appscode/catalogkubedbcom-hazelcastversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-hazelcastversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-hazelcastversion-editor appscode/catalogkubedbcom-hazelcastversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HazelcastVersion Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogkubedbcom-hazelcastversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-hazelcastversion-editor appscode/catalogkubedbcom-hazelcastversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-hazelcastversion-editor appscode/catalogkubedbcom-hazelcastversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a HazelcastVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-h Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-hazelcastversion-editor appscode/catalogkubedbcom-hazelcastversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-hazelcastversion-editor appscode/catalogkubedbcom-hazelcastversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-hazelcastversion-editor appscode/catalogkubedbcom-hazelcastversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-hazelcastversion-editor appscode/catalogkubedbcom-hazelcastversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-igniteversion-editor/Chart.yaml b/charts/catalogkubedbcom-igniteversion-editor/Chart.yaml index 7f87590e94..de461048d5 100644 --- a/charts/catalogkubedbcom-igniteversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-igniteversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"igniteversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: IgniteVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-igniteversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-igniteversion-editor/README.md b/charts/catalogkubedbcom-igniteversion-editor/README.md index 9c687e6498..4fde396bf4 100644 --- a/charts/catalogkubedbcom-igniteversion-editor/README.md +++ b/charts/catalogkubedbcom-igniteversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-igniteversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-igniteversion-editor appscode/catalogkubedbcom-igniteversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-igniteversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-igniteversion-editor appscode/catalogkubedbcom-igniteversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a IgniteVersion Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `catalogkubedbcom-igniteversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-igniteversion-editor appscode/catalogkubedbcom-igniteversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-igniteversion-editor appscode/catalogkubedbcom-igniteversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a IgniteVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-i Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-igniteversion-editor appscode/catalogkubedbcom-igniteversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-igniteversion-editor appscode/catalogkubedbcom-igniteversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-igniteversion-editor appscode/catalogkubedbcom-igniteversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-igniteversion-editor appscode/catalogkubedbcom-igniteversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-kafkaconnectorversion-editor/Chart.yaml b/charts/catalogkubedbcom-kafkaconnectorversion-editor/Chart.yaml index 81bd250d53..e8618a193f 100644 --- a/charts/catalogkubedbcom-kafkaconnectorversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-kafkaconnectorversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"kafkaconnectorversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: KafkaConnectorVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-kafkaconnectorversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-kafkaconnectorversion-editor/README.md b/charts/catalogkubedbcom-kafkaconnectorversion-editor/README.md index 77029c47ea..29fc4bda98 100644 --- a/charts/catalogkubedbcom-kafkaconnectorversion-editor/README.md +++ b/charts/catalogkubedbcom-kafkaconnectorversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-kafkaconnectorversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-kafkaconnectorversion-editor appscode/catalogkubedbcom-kafkaconnectorversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-kafkaconnectorversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-kafkaconnectorversion-editor appscode/catalogkubedbcom-kafkaconnectorversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a KafkaConnectorVersion Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `catalogkubedbcom-kafkaconnectorversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-kafkaconnectorversion-editor appscode/catalogkubedbcom-kafkaconnectorversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-kafkaconnectorversion-editor appscode/catalogkubedbcom-kafkaconnectorversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a KafkaConnectorVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-k Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-kafkaconnectorversion-editor appscode/catalogkubedbcom-kafkaconnectorversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-kafkaconnectorversion-editor appscode/catalogkubedbcom-kafkaconnectorversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-kafkaconnectorversion-editor appscode/catalogkubedbcom-kafkaconnectorversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-kafkaconnectorversion-editor appscode/catalogkubedbcom-kafkaconnectorversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-kafkaversion-editor/Chart.yaml b/charts/catalogkubedbcom-kafkaversion-editor/Chart.yaml index c631ffa7ef..909d6ce2e3 100644 --- a/charts/catalogkubedbcom-kafkaversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-kafkaversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"kafkaversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: KafkaVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-kafkaversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-kafkaversion-editor/README.md b/charts/catalogkubedbcom-kafkaversion-editor/README.md index e00c0ae512..a30b17758a 100644 --- a/charts/catalogkubedbcom-kafkaversion-editor/README.md +++ b/charts/catalogkubedbcom-kafkaversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-kafkaversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-kafkaversion-editor appscode/catalogkubedbcom-kafkaversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-kafkaversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-kafkaversion-editor appscode/catalogkubedbcom-kafkaversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a KafkaVersion Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogkubedbcom-kafkaversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-kafkaversion-editor appscode/catalogkubedbcom-kafkaversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-kafkaversion-editor appscode/catalogkubedbcom-kafkaversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a KafkaVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-k Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-kafkaversion-editor appscode/catalogkubedbcom-kafkaversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-kafkaversion-editor appscode/catalogkubedbcom-kafkaversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-kafkaversion-editor appscode/catalogkubedbcom-kafkaversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-kafkaversion-editor appscode/catalogkubedbcom-kafkaversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-mariadbversion-editor/Chart.yaml b/charts/catalogkubedbcom-mariadbversion-editor/Chart.yaml index ccd28f5e3d..504d1f2e71 100644 --- a/charts/catalogkubedbcom-mariadbversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-mariadbversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"mariadbversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MariaDBVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-mariadbversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-mariadbversion-editor/README.md b/charts/catalogkubedbcom-mariadbversion-editor/README.md index da3fc51db5..9e4bd8df00 100644 --- a/charts/catalogkubedbcom-mariadbversion-editor/README.md +++ b/charts/catalogkubedbcom-mariadbversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-mariadbversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-mariadbversion-editor appscode/catalogkubedbcom-mariadbversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-mariadbversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-mariadbversion-editor appscode/catalogkubedbcom-mariadbversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBVersion Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `catalogkubedbcom-mariadbversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-mariadbversion-editor appscode/catalogkubedbcom-mariadbversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-mariadbversion-editor appscode/catalogkubedbcom-mariadbversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MariaDBVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-m Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-mariadbversion-editor appscode/catalogkubedbcom-mariadbversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-mariadbversion-editor appscode/catalogkubedbcom-mariadbversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-mariadbversion-editor appscode/catalogkubedbcom-mariadbversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-mariadbversion-editor appscode/catalogkubedbcom-mariadbversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-memcachedversion-editor/Chart.yaml b/charts/catalogkubedbcom-memcachedversion-editor/Chart.yaml index c685ba3121..e0c3d6c488 100644 --- a/charts/catalogkubedbcom-memcachedversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-memcachedversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"memcachedversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MemcachedVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-memcachedversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-memcachedversion-editor/README.md b/charts/catalogkubedbcom-memcachedversion-editor/README.md index 2bc6e656f0..54d0e4c602 100644 --- a/charts/catalogkubedbcom-memcachedversion-editor/README.md +++ b/charts/catalogkubedbcom-memcachedversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-memcachedversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-memcachedversion-editor appscode/catalogkubedbcom-memcachedversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-memcachedversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-memcachedversion-editor appscode/catalogkubedbcom-memcachedversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MemcachedVersion Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogkubedbcom-memcachedversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-memcachedversion-editor appscode/catalogkubedbcom-memcachedversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-memcachedversion-editor appscode/catalogkubedbcom-memcachedversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MemcachedVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-m Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-memcachedversion-editor appscode/catalogkubedbcom-memcachedversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-memcachedversion-editor appscode/catalogkubedbcom-memcachedversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-memcachedversion-editor appscode/catalogkubedbcom-memcachedversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-memcachedversion-editor appscode/catalogkubedbcom-memcachedversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-milvusversion-editor/Chart.yaml b/charts/catalogkubedbcom-milvusversion-editor/Chart.yaml index 87bbe68db7..03aa3d080f 100644 --- a/charts/catalogkubedbcom-milvusversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-milvusversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"milvusversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MilvusVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-milvusversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-milvusversion-editor/README.md b/charts/catalogkubedbcom-milvusversion-editor/README.md index da219e6078..54827d7951 100644 --- a/charts/catalogkubedbcom-milvusversion-editor/README.md +++ b/charts/catalogkubedbcom-milvusversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-milvusversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-milvusversion-editor appscode/catalogkubedbcom-milvusversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-milvusversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-milvusversion-editor appscode/catalogkubedbcom-milvusversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MilvusVersion Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `catalogkubedbcom-milvusversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-milvusversion-editor appscode/catalogkubedbcom-milvusversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-milvusversion-editor appscode/catalogkubedbcom-milvusversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MilvusVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-m Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-milvusversion-editor appscode/catalogkubedbcom-milvusversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-milvusversion-editor appscode/catalogkubedbcom-milvusversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-milvusversion-editor appscode/catalogkubedbcom-milvusversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-milvusversion-editor appscode/catalogkubedbcom-milvusversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-mongodbversion-editor/Chart.yaml b/charts/catalogkubedbcom-mongodbversion-editor/Chart.yaml index ace96d67c6..ab69288f66 100644 --- a/charts/catalogkubedbcom-mongodbversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-mongodbversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"mongodbversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MongoDBVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-mongodbversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-mongodbversion-editor/README.md b/charts/catalogkubedbcom-mongodbversion-editor/README.md index a05b603586..5de93571ed 100644 --- a/charts/catalogkubedbcom-mongodbversion-editor/README.md +++ b/charts/catalogkubedbcom-mongodbversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-mongodbversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-mongodbversion-editor appscode/catalogkubedbcom-mongodbversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-mongodbversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-mongodbversion-editor appscode/catalogkubedbcom-mongodbversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBVersion Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `catalogkubedbcom-mongodbversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-mongodbversion-editor appscode/catalogkubedbcom-mongodbversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-mongodbversion-editor appscode/catalogkubedbcom-mongodbversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MongoDBVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-m Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-mongodbversion-editor appscode/catalogkubedbcom-mongodbversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-mongodbversion-editor appscode/catalogkubedbcom-mongodbversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-mongodbversion-editor appscode/catalogkubedbcom-mongodbversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-mongodbversion-editor appscode/catalogkubedbcom-mongodbversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-mssqlserverversion-editor/Chart.yaml b/charts/catalogkubedbcom-mssqlserverversion-editor/Chart.yaml index 4300310f99..16b8fa0a6e 100644 --- a/charts/catalogkubedbcom-mssqlserverversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-mssqlserverversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"mssqlserverversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLServerVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-mssqlserverversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-mssqlserverversion-editor/README.md b/charts/catalogkubedbcom-mssqlserverversion-editor/README.md index 8545f7ee5f..f17a672ce4 100644 --- a/charts/catalogkubedbcom-mssqlserverversion-editor/README.md +++ b/charts/catalogkubedbcom-mssqlserverversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-mssqlserverversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-mssqlserverversion-editor appscode/catalogkubedbcom-mssqlserverversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-mssqlserverversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-mssqlserverversion-editor appscode/catalogkubedbcom-mssqlserverversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerVersion Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `catalogkubedbcom-mssqlserverversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-mssqlserverversion-editor appscode/catalogkubedbcom-mssqlserverversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-mssqlserverversion-editor appscode/catalogkubedbcom-mssqlserverversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLServerVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-m Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-mssqlserverversion-editor appscode/catalogkubedbcom-mssqlserverversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-mssqlserverversion-editor appscode/catalogkubedbcom-mssqlserverversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-mssqlserverversion-editor appscode/catalogkubedbcom-mssqlserverversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-mssqlserverversion-editor appscode/catalogkubedbcom-mssqlserverversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-mysqlversion-editor/Chart.yaml b/charts/catalogkubedbcom-mysqlversion-editor/Chart.yaml index 0e9a3013b7..a355a9ec8e 100644 --- a/charts/catalogkubedbcom-mysqlversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-mysqlversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"mysqlversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MySQLVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-mysqlversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-mysqlversion-editor/README.md b/charts/catalogkubedbcom-mysqlversion-editor/README.md index 6f2e3a5491..d63463ebd1 100644 --- a/charts/catalogkubedbcom-mysqlversion-editor/README.md +++ b/charts/catalogkubedbcom-mysqlversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-mysqlversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-mysqlversion-editor appscode/catalogkubedbcom-mysqlversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-mysqlversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-mysqlversion-editor appscode/catalogkubedbcom-mysqlversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLVersion Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogkubedbcom-mysqlversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-mysqlversion-editor appscode/catalogkubedbcom-mysqlversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-mysqlversion-editor appscode/catalogkubedbcom-mysqlversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MySQLVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-m Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-mysqlversion-editor appscode/catalogkubedbcom-mysqlversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-mysqlversion-editor appscode/catalogkubedbcom-mysqlversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-mysqlversion-editor appscode/catalogkubedbcom-mysqlversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-mysqlversion-editor appscode/catalogkubedbcom-mysqlversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-neo4jversion-editor/Chart.yaml b/charts/catalogkubedbcom-neo4jversion-editor/Chart.yaml index 4bc2488244..9f0f749c77 100644 --- a/charts/catalogkubedbcom-neo4jversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-neo4jversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"neo4jversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Neo4jVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-neo4jversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-neo4jversion-editor/README.md b/charts/catalogkubedbcom-neo4jversion-editor/README.md index 7e22f5e2be..efb22f9fbb 100644 --- a/charts/catalogkubedbcom-neo4jversion-editor/README.md +++ b/charts/catalogkubedbcom-neo4jversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-neo4jversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-neo4jversion-editor appscode/catalogkubedbcom-neo4jversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-neo4jversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-neo4jversion-editor appscode/catalogkubedbcom-neo4jversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Neo4jVersion Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogkubedbcom-neo4jversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-neo4jversion-editor appscode/catalogkubedbcom-neo4jversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-neo4jversion-editor appscode/catalogkubedbcom-neo4jversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Neo4jVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-n Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-neo4jversion-editor appscode/catalogkubedbcom-neo4jversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-neo4jversion-editor appscode/catalogkubedbcom-neo4jversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-neo4jversion-editor appscode/catalogkubedbcom-neo4jversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-neo4jversion-editor appscode/catalogkubedbcom-neo4jversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-oracleversion-editor/Chart.yaml b/charts/catalogkubedbcom-oracleversion-editor/Chart.yaml index 32ec878cb9..3fe76a2c36 100644 --- a/charts/catalogkubedbcom-oracleversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-oracleversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"oracleversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: OracleVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-oracleversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-oracleversion-editor/README.md b/charts/catalogkubedbcom-oracleversion-editor/README.md index 74ad9a5236..bf035daeb8 100644 --- a/charts/catalogkubedbcom-oracleversion-editor/README.md +++ b/charts/catalogkubedbcom-oracleversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-oracleversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-oracleversion-editor appscode/catalogkubedbcom-oracleversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-oracleversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-oracleversion-editor appscode/catalogkubedbcom-oracleversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a OracleVersion Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `catalogkubedbcom-oracleversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-oracleversion-editor appscode/catalogkubedbcom-oracleversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-oracleversion-editor appscode/catalogkubedbcom-oracleversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a OracleVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-o Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-oracleversion-editor appscode/catalogkubedbcom-oracleversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-oracleversion-editor appscode/catalogkubedbcom-oracleversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-oracleversion-editor appscode/catalogkubedbcom-oracleversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-oracleversion-editor appscode/catalogkubedbcom-oracleversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-perconaxtradbversion-editor/Chart.yaml b/charts/catalogkubedbcom-perconaxtradbversion-editor/Chart.yaml index ae4b97b2e1..8fc06ab7b3 100644 --- a/charts/catalogkubedbcom-perconaxtradbversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-perconaxtradbversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"perconaxtradbversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PerconaXtraDBVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-perconaxtradbversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-perconaxtradbversion-editor/README.md b/charts/catalogkubedbcom-perconaxtradbversion-editor/README.md index e378cbedc9..fa6e7bf7ea 100644 --- a/charts/catalogkubedbcom-perconaxtradbversion-editor/README.md +++ b/charts/catalogkubedbcom-perconaxtradbversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-perconaxtradbversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-perconaxtradbversion-editor appscode/catalogkubedbcom-perconaxtradbversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-perconaxtradbversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-perconaxtradbversion-editor appscode/catalogkubedbcom-perconaxtradbversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PerconaXtraDBVersion Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `catalogkubedbcom-perconaxtradbversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-perconaxtradbversion-editor appscode/catalogkubedbcom-perconaxtradbversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-perconaxtradbversion-editor appscode/catalogkubedbcom-perconaxtradbversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PerconaXtraDBVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-p Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-perconaxtradbversion-editor appscode/catalogkubedbcom-perconaxtradbversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-perconaxtradbversion-editor appscode/catalogkubedbcom-perconaxtradbversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-perconaxtradbversion-editor appscode/catalogkubedbcom-perconaxtradbversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-perconaxtradbversion-editor appscode/catalogkubedbcom-perconaxtradbversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-pgbouncerversion-editor/Chart.yaml b/charts/catalogkubedbcom-pgbouncerversion-editor/Chart.yaml index 3547712dcc..4b3392741b 100644 --- a/charts/catalogkubedbcom-pgbouncerversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-pgbouncerversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"pgbouncerversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PgBouncerVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-pgbouncerversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-pgbouncerversion-editor/README.md b/charts/catalogkubedbcom-pgbouncerversion-editor/README.md index d01dce56a1..a46908edcc 100644 --- a/charts/catalogkubedbcom-pgbouncerversion-editor/README.md +++ b/charts/catalogkubedbcom-pgbouncerversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-pgbouncerversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-pgbouncerversion-editor appscode/catalogkubedbcom-pgbouncerversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-pgbouncerversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-pgbouncerversion-editor appscode/catalogkubedbcom-pgbouncerversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncerVersion Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogkubedbcom-pgbouncerversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-pgbouncerversion-editor appscode/catalogkubedbcom-pgbouncerversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-pgbouncerversion-editor appscode/catalogkubedbcom-pgbouncerversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PgBouncerVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-p Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-pgbouncerversion-editor appscode/catalogkubedbcom-pgbouncerversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-pgbouncerversion-editor appscode/catalogkubedbcom-pgbouncerversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-pgbouncerversion-editor appscode/catalogkubedbcom-pgbouncerversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-pgbouncerversion-editor appscode/catalogkubedbcom-pgbouncerversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-pgpoolversion-editor/Chart.yaml b/charts/catalogkubedbcom-pgpoolversion-editor/Chart.yaml index eec3e3ae85..5f55a539f6 100644 --- a/charts/catalogkubedbcom-pgpoolversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-pgpoolversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"pgpoolversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PgpoolVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-pgpoolversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-pgpoolversion-editor/README.md b/charts/catalogkubedbcom-pgpoolversion-editor/README.md index 27655aeb29..7f056d1e43 100644 --- a/charts/catalogkubedbcom-pgpoolversion-editor/README.md +++ b/charts/catalogkubedbcom-pgpoolversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-pgpoolversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-pgpoolversion-editor appscode/catalogkubedbcom-pgpoolversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-pgpoolversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-pgpoolversion-editor appscode/catalogkubedbcom-pgpoolversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgpoolVersion Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `catalogkubedbcom-pgpoolversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-pgpoolversion-editor appscode/catalogkubedbcom-pgpoolversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-pgpoolversion-editor appscode/catalogkubedbcom-pgpoolversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PgpoolVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-p Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-pgpoolversion-editor appscode/catalogkubedbcom-pgpoolversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-pgpoolversion-editor appscode/catalogkubedbcom-pgpoolversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-pgpoolversion-editor appscode/catalogkubedbcom-pgpoolversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-pgpoolversion-editor appscode/catalogkubedbcom-pgpoolversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-postgresversion-editor/Chart.yaml b/charts/catalogkubedbcom-postgresversion-editor/Chart.yaml index f42b1d5657..c279496aed 100644 --- a/charts/catalogkubedbcom-postgresversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-postgresversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"postgresversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PostgresVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-postgresversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-postgresversion-editor/README.md b/charts/catalogkubedbcom-postgresversion-editor/README.md index 22027241f8..568ad9afbb 100644 --- a/charts/catalogkubedbcom-postgresversion-editor/README.md +++ b/charts/catalogkubedbcom-postgresversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-postgresversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-postgresversion-editor appscode/catalogkubedbcom-postgresversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-postgresversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-postgresversion-editor appscode/catalogkubedbcom-postgresversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresVersion Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `catalogkubedbcom-postgresversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-postgresversion-editor appscode/catalogkubedbcom-postgresversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-postgresversion-editor appscode/catalogkubedbcom-postgresversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PostgresVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-p Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-postgresversion-editor appscode/catalogkubedbcom-postgresversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-postgresversion-editor appscode/catalogkubedbcom-postgresversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-postgresversion-editor appscode/catalogkubedbcom-postgresversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-postgresversion-editor appscode/catalogkubedbcom-postgresversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-proxysqlversion-editor/Chart.yaml b/charts/catalogkubedbcom-proxysqlversion-editor/Chart.yaml index 8531cf6214..3cb6e33860 100644 --- a/charts/catalogkubedbcom-proxysqlversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-proxysqlversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"proxysqlversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProxySQLVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-proxysqlversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-proxysqlversion-editor/README.md b/charts/catalogkubedbcom-proxysqlversion-editor/README.md index 370ef5114a..64f783eb11 100644 --- a/charts/catalogkubedbcom-proxysqlversion-editor/README.md +++ b/charts/catalogkubedbcom-proxysqlversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-proxysqlversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-proxysqlversion-editor appscode/catalogkubedbcom-proxysqlversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-proxysqlversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-proxysqlversion-editor appscode/catalogkubedbcom-proxysqlversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQLVersion Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `catalogkubedbcom-proxysqlversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-proxysqlversion-editor appscode/catalogkubedbcom-proxysqlversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-proxysqlversion-editor appscode/catalogkubedbcom-proxysqlversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProxySQLVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-p Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-proxysqlversion-editor appscode/catalogkubedbcom-proxysqlversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-proxysqlversion-editor appscode/catalogkubedbcom-proxysqlversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-proxysqlversion-editor appscode/catalogkubedbcom-proxysqlversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-proxysqlversion-editor appscode/catalogkubedbcom-proxysqlversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-qdrantversion-editor/Chart.yaml b/charts/catalogkubedbcom-qdrantversion-editor/Chart.yaml index 451eee4037..fa3f924ecf 100644 --- a/charts/catalogkubedbcom-qdrantversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-qdrantversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"qdrantversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: QdrantVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-qdrantversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-qdrantversion-editor/README.md b/charts/catalogkubedbcom-qdrantversion-editor/README.md index 460236ea45..5f00199118 100644 --- a/charts/catalogkubedbcom-qdrantversion-editor/README.md +++ b/charts/catalogkubedbcom-qdrantversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-qdrantversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-qdrantversion-editor appscode/catalogkubedbcom-qdrantversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-qdrantversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-qdrantversion-editor appscode/catalogkubedbcom-qdrantversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a QdrantVersion Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `catalogkubedbcom-qdrantversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-qdrantversion-editor appscode/catalogkubedbcom-qdrantversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-qdrantversion-editor appscode/catalogkubedbcom-qdrantversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a QdrantVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-q Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-qdrantversion-editor appscode/catalogkubedbcom-qdrantversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-qdrantversion-editor appscode/catalogkubedbcom-qdrantversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-qdrantversion-editor appscode/catalogkubedbcom-qdrantversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-qdrantversion-editor appscode/catalogkubedbcom-qdrantversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-rabbitmqversion-editor/Chart.yaml b/charts/catalogkubedbcom-rabbitmqversion-editor/Chart.yaml index 403315f8f8..6bf5d97fa4 100644 --- a/charts/catalogkubedbcom-rabbitmqversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-rabbitmqversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"rabbitmqversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RabbitMQVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-rabbitmqversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-rabbitmqversion-editor/README.md b/charts/catalogkubedbcom-rabbitmqversion-editor/README.md index 88ad148b32..74f8aaa69b 100644 --- a/charts/catalogkubedbcom-rabbitmqversion-editor/README.md +++ b/charts/catalogkubedbcom-rabbitmqversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-rabbitmqversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-rabbitmqversion-editor appscode/catalogkubedbcom-rabbitmqversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-rabbitmqversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-rabbitmqversion-editor appscode/catalogkubedbcom-rabbitmqversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RabbitMQVersion Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `catalogkubedbcom-rabbitmqversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-rabbitmqversion-editor appscode/catalogkubedbcom-rabbitmqversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-rabbitmqversion-editor appscode/catalogkubedbcom-rabbitmqversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RabbitMQVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-rabbitmqversion-editor appscode/catalogkubedbcom-rabbitmqversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-rabbitmqversion-editor appscode/catalogkubedbcom-rabbitmqversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-rabbitmqversion-editor appscode/catalogkubedbcom-rabbitmqversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-rabbitmqversion-editor appscode/catalogkubedbcom-rabbitmqversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-redisversion-editor/Chart.yaml b/charts/catalogkubedbcom-redisversion-editor/Chart.yaml index 4340585e3f..1a8a5669b2 100644 --- a/charts/catalogkubedbcom-redisversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-redisversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"redisversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RedisVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-redisversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-redisversion-editor/README.md b/charts/catalogkubedbcom-redisversion-editor/README.md index 06c93fd115..e3d65218d8 100644 --- a/charts/catalogkubedbcom-redisversion-editor/README.md +++ b/charts/catalogkubedbcom-redisversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-redisversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-redisversion-editor appscode/catalogkubedbcom-redisversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-redisversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-redisversion-editor appscode/catalogkubedbcom-redisversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisVersion Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogkubedbcom-redisversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-redisversion-editor appscode/catalogkubedbcom-redisversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-redisversion-editor appscode/catalogkubedbcom-redisversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RedisVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-redisversion-editor appscode/catalogkubedbcom-redisversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-redisversion-editor appscode/catalogkubedbcom-redisversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-redisversion-editor appscode/catalogkubedbcom-redisversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-redisversion-editor appscode/catalogkubedbcom-redisversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-schemaregistryversion-editor/Chart.yaml b/charts/catalogkubedbcom-schemaregistryversion-editor/Chart.yaml index 244d23c83c..b9a6d49c06 100644 --- a/charts/catalogkubedbcom-schemaregistryversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-schemaregistryversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"schemaregistryversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SchemaRegistryVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-schemaregistryversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-schemaregistryversion-editor/README.md b/charts/catalogkubedbcom-schemaregistryversion-editor/README.md index 7418120a06..039be9422c 100644 --- a/charts/catalogkubedbcom-schemaregistryversion-editor/README.md +++ b/charts/catalogkubedbcom-schemaregistryversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-schemaregistryversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-schemaregistryversion-editor appscode/catalogkubedbcom-schemaregistryversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-schemaregistryversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-schemaregistryversion-editor appscode/catalogkubedbcom-schemaregistryversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SchemaRegistryVersion Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `catalogkubedbcom-schemaregistryversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-schemaregistryversion-editor appscode/catalogkubedbcom-schemaregistryversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-schemaregistryversion-editor appscode/catalogkubedbcom-schemaregistryversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SchemaRegistryVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-s Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-schemaregistryversion-editor appscode/catalogkubedbcom-schemaregistryversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-schemaregistryversion-editor appscode/catalogkubedbcom-schemaregistryversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-schemaregistryversion-editor appscode/catalogkubedbcom-schemaregistryversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-schemaregistryversion-editor appscode/catalogkubedbcom-schemaregistryversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-singlestoreversion-editor/Chart.yaml b/charts/catalogkubedbcom-singlestoreversion-editor/Chart.yaml index c2d5855c39..7988920a71 100644 --- a/charts/catalogkubedbcom-singlestoreversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-singlestoreversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"singlestoreversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SinglestoreVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-singlestoreversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-singlestoreversion-editor/README.md b/charts/catalogkubedbcom-singlestoreversion-editor/README.md index f62bc1be05..28852a0fdc 100644 --- a/charts/catalogkubedbcom-singlestoreversion-editor/README.md +++ b/charts/catalogkubedbcom-singlestoreversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-singlestoreversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-singlestoreversion-editor appscode/catalogkubedbcom-singlestoreversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-singlestoreversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-singlestoreversion-editor appscode/catalogkubedbcom-singlestoreversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SinglestoreVersion Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `catalogkubedbcom-singlestoreversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-singlestoreversion-editor appscode/catalogkubedbcom-singlestoreversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-singlestoreversion-editor appscode/catalogkubedbcom-singlestoreversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SinglestoreVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-s Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-singlestoreversion-editor appscode/catalogkubedbcom-singlestoreversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-singlestoreversion-editor appscode/catalogkubedbcom-singlestoreversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-singlestoreversion-editor appscode/catalogkubedbcom-singlestoreversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-singlestoreversion-editor appscode/catalogkubedbcom-singlestoreversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-solrversion-editor/Chart.yaml b/charts/catalogkubedbcom-solrversion-editor/Chart.yaml index 25394b4fc1..6d845816fd 100644 --- a/charts/catalogkubedbcom-solrversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-solrversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"solrversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SolrVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-solrversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-solrversion-editor/README.md b/charts/catalogkubedbcom-solrversion-editor/README.md index f1f65b67a3..cfebd69c31 100644 --- a/charts/catalogkubedbcom-solrversion-editor/README.md +++ b/charts/catalogkubedbcom-solrversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-solrversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-solrversion-editor appscode/catalogkubedbcom-solrversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-solrversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-solrversion-editor appscode/catalogkubedbcom-solrversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SolrVersion Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogkubedbcom-solrversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-solrversion-editor appscode/catalogkubedbcom-solrversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-solrversion-editor appscode/catalogkubedbcom-solrversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SolrVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-s Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-solrversion-editor appscode/catalogkubedbcom-solrversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-solrversion-editor appscode/catalogkubedbcom-solrversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-solrversion-editor appscode/catalogkubedbcom-solrversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-solrversion-editor appscode/catalogkubedbcom-solrversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-weaviateversion-editor/Chart.yaml b/charts/catalogkubedbcom-weaviateversion-editor/Chart.yaml index 4d72ed8314..8e56ab170e 100644 --- a/charts/catalogkubedbcom-weaviateversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-weaviateversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"weaviateversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: WeaviateVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-weaviateversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-weaviateversion-editor/README.md b/charts/catalogkubedbcom-weaviateversion-editor/README.md index f7d84eae6e..d8304f20c9 100644 --- a/charts/catalogkubedbcom-weaviateversion-editor/README.md +++ b/charts/catalogkubedbcom-weaviateversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-weaviateversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-weaviateversion-editor appscode/catalogkubedbcom-weaviateversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-weaviateversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-weaviateversion-editor appscode/catalogkubedbcom-weaviateversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a WeaviateVersion Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `catalogkubedbcom-weaviateversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-weaviateversion-editor appscode/catalogkubedbcom-weaviateversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-weaviateversion-editor appscode/catalogkubedbcom-weaviateversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a WeaviateVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-w Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-weaviateversion-editor appscode/catalogkubedbcom-weaviateversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-weaviateversion-editor appscode/catalogkubedbcom-weaviateversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-weaviateversion-editor appscode/catalogkubedbcom-weaviateversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-weaviateversion-editor appscode/catalogkubedbcom-weaviateversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-zookeeperversion-editor/Chart.yaml b/charts/catalogkubedbcom-zookeeperversion-editor/Chart.yaml index 3110c32a54..324eafd25d 100644 --- a/charts/catalogkubedbcom-zookeeperversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-zookeeperversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"zookeeperversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ZooKeeperVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-zookeeperversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubedbcom-zookeeperversion-editor/README.md b/charts/catalogkubedbcom-zookeeperversion-editor/README.md index debae2759c..1eac348794 100644 --- a/charts/catalogkubedbcom-zookeeperversion-editor/README.md +++ b/charts/catalogkubedbcom-zookeeperversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-zookeeperversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubedbcom-zookeeperversion-editor appscode/catalogkubedbcom-zookeeperversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubedbcom-zookeeperversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubedbcom-zookeeperversion-editor appscode/catalogkubedbcom-zookeeperversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ZooKeeperVersion Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogkubedbcom-zookeeperversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-zookeeperversion-editor appscode/catalogkubedbcom-zookeeperversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubedbcom-zookeeperversion-editor appscode/catalogkubedbcom-zookeeperversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ZooKeeperVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-z Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-zookeeperversion-editor appscode/catalogkubedbcom-zookeeperversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-zookeeperversion-editor appscode/catalogkubedbcom-zookeeperversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-zookeeperversion-editor appscode/catalogkubedbcom-zookeeperversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-zookeeperversion-editor appscode/catalogkubedbcom-zookeeperversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubevaultcom-vaultserverversion-editor/Chart.yaml b/charts/catalogkubevaultcom-vaultserverversion-editor/Chart.yaml index c587ead9b6..5f88d40303 100644 --- a/charts/catalogkubevaultcom-vaultserverversion-editor/Chart.yaml +++ b/charts/catalogkubevaultcom-vaultserverversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubevault.com","version":"v1alpha1","resource":"vaultserverversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: VaultServerVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubevaultcom-vaultserverversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubevaultcom-vaultserverversion-editor/README.md b/charts/catalogkubevaultcom-vaultserverversion-editor/README.md index d30b1113cc..74c72e731a 100644 --- a/charts/catalogkubevaultcom-vaultserverversion-editor/README.md +++ b/charts/catalogkubevaultcom-vaultserverversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubevaultcom-vaultserverversion-editor --version=v0.38.0 -$ helm upgrade -i catalogkubevaultcom-vaultserverversion-editor appscode/catalogkubevaultcom-vaultserverversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubevaultcom-vaultserverversion-editor --version=v0.39.0 +$ helm upgrade -i catalogkubevaultcom-vaultserverversion-editor appscode/catalogkubevaultcom-vaultserverversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VaultServerVersion Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `catalogkubevaultcom-vaultserverversion-editor`: ```bash -$ helm upgrade -i catalogkubevaultcom-vaultserverversion-editor appscode/catalogkubevaultcom-vaultserverversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubevaultcom-vaultserverversion-editor appscode/catalogkubevaultcom-vaultserverversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a VaultServerVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubevaultco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubevaultcom-vaultserverversion-editor appscode/catalogkubevaultcom-vaultserverversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubevault.com/v1alpha1 +$ helm upgrade -i catalogkubevaultcom-vaultserverversion-editor appscode/catalogkubevaultcom-vaultserverversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubevaultcom-vaultserverversion-editor appscode/catalogkubevaultcom-vaultserverversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubevaultcom-vaultserverversion-editor appscode/catalogkubevaultcom-vaultserverversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-elasticsearchbinding-editor/Chart.yaml b/charts/catalogkubewaredev-elasticsearchbinding-editor/Chart.yaml index 7c2ee61a5f..d60709fc38 100644 --- a/charts/catalogkubewaredev-elasticsearchbinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-elasticsearchbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"elasticsearchbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ElasticsearchBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-elasticsearchbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubewaredev-elasticsearchbinding-editor/README.md b/charts/catalogkubewaredev-elasticsearchbinding-editor/README.md index d67e4eeebe..7d6419bb8e 100644 --- a/charts/catalogkubewaredev-elasticsearchbinding-editor/README.md +++ b/charts/catalogkubewaredev-elasticsearchbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-elasticsearchbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogkubewaredev-elasticsearchbinding-editor appscode/catalogkubewaredev-elasticsearchbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubewaredev-elasticsearchbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogkubewaredev-elasticsearchbinding-editor appscode/catalogkubewaredev-elasticsearchbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ElasticsearchBinding Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `catalogkubewaredev-elasticsearchbinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-elasticsearchbinding-editor appscode/catalogkubewaredev-elasticsearchbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubewaredev-elasticsearchbinding-editor appscode/catalogkubewaredev-elasticsearchbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ElasticsearchBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-elasticsearchbinding-editor appscode/catalogkubewaredev-elasticsearchbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-elasticsearchbinding-editor appscode/catalogkubewaredev-elasticsearchbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-elasticsearchbinding-editor appscode/catalogkubewaredev-elasticsearchbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-elasticsearchbinding-editor appscode/catalogkubewaredev-elasticsearchbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-kafkabinding-editor/Chart.yaml b/charts/catalogkubewaredev-kafkabinding-editor/Chart.yaml index ef12a6cfaf..440b209856 100644 --- a/charts/catalogkubewaredev-kafkabinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-kafkabinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"kafkabindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: KafkaBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-kafkabinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubewaredev-kafkabinding-editor/README.md b/charts/catalogkubewaredev-kafkabinding-editor/README.md index b578dad540..a7f2afc111 100644 --- a/charts/catalogkubewaredev-kafkabinding-editor/README.md +++ b/charts/catalogkubewaredev-kafkabinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-kafkabinding-editor --version=v0.38.0 -$ helm upgrade -i catalogkubewaredev-kafkabinding-editor appscode/catalogkubewaredev-kafkabinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubewaredev-kafkabinding-editor --version=v0.39.0 +$ helm upgrade -i catalogkubewaredev-kafkabinding-editor appscode/catalogkubewaredev-kafkabinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a KafkaBinding Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogkubewaredev-kafkabinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-kafkabinding-editor appscode/catalogkubewaredev-kafkabinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubewaredev-kafkabinding-editor appscode/catalogkubewaredev-kafkabinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a KafkaBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-kafkabinding-editor appscode/catalogkubewaredev-kafkabinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-kafkabinding-editor appscode/catalogkubewaredev-kafkabinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-kafkabinding-editor appscode/catalogkubewaredev-kafkabinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-kafkabinding-editor appscode/catalogkubewaredev-kafkabinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-mariadbbinding-editor/Chart.yaml b/charts/catalogkubewaredev-mariadbbinding-editor/Chart.yaml index 481a7b5f77..4d2c2be5f1 100644 --- a/charts/catalogkubewaredev-mariadbbinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-mariadbbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"mariadbbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MariaDBBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-mariadbbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubewaredev-mariadbbinding-editor/README.md b/charts/catalogkubewaredev-mariadbbinding-editor/README.md index 3692c5f978..9e8440ca8b 100644 --- a/charts/catalogkubewaredev-mariadbbinding-editor/README.md +++ b/charts/catalogkubewaredev-mariadbbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-mariadbbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogkubewaredev-mariadbbinding-editor appscode/catalogkubewaredev-mariadbbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubewaredev-mariadbbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogkubewaredev-mariadbbinding-editor appscode/catalogkubewaredev-mariadbbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBBinding Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `catalogkubewaredev-mariadbbinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-mariadbbinding-editor appscode/catalogkubewaredev-mariadbbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubewaredev-mariadbbinding-editor appscode/catalogkubewaredev-mariadbbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MariaDBBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-mariadbbinding-editor appscode/catalogkubewaredev-mariadbbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-mariadbbinding-editor appscode/catalogkubewaredev-mariadbbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-mariadbbinding-editor appscode/catalogkubewaredev-mariadbbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-mariadbbinding-editor appscode/catalogkubewaredev-mariadbbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-memcachedbinding-editor/Chart.yaml b/charts/catalogkubewaredev-memcachedbinding-editor/Chart.yaml index 66d07cb509..c2d29d3dc9 100644 --- a/charts/catalogkubewaredev-memcachedbinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-memcachedbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"memcachedbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MemcachedBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-memcachedbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubewaredev-memcachedbinding-editor/README.md b/charts/catalogkubewaredev-memcachedbinding-editor/README.md index b1c9620a31..de8f2dfa70 100644 --- a/charts/catalogkubewaredev-memcachedbinding-editor/README.md +++ b/charts/catalogkubewaredev-memcachedbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-memcachedbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogkubewaredev-memcachedbinding-editor appscode/catalogkubewaredev-memcachedbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubewaredev-memcachedbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogkubewaredev-memcachedbinding-editor appscode/catalogkubewaredev-memcachedbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MemcachedBinding Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogkubewaredev-memcachedbinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-memcachedbinding-editor appscode/catalogkubewaredev-memcachedbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubewaredev-memcachedbinding-editor appscode/catalogkubewaredev-memcachedbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MemcachedBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-memcachedbinding-editor appscode/catalogkubewaredev-memcachedbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-memcachedbinding-editor appscode/catalogkubewaredev-memcachedbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-memcachedbinding-editor appscode/catalogkubewaredev-memcachedbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-memcachedbinding-editor appscode/catalogkubewaredev-memcachedbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-mongodbbinding-editor/Chart.yaml b/charts/catalogkubewaredev-mongodbbinding-editor/Chart.yaml index 0143b0af62..24d5a5b4f9 100644 --- a/charts/catalogkubewaredev-mongodbbinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-mongodbbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"mongodbbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MongoDBBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-mongodbbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubewaredev-mongodbbinding-editor/README.md b/charts/catalogkubewaredev-mongodbbinding-editor/README.md index c4053f51b9..f63b5feb7f 100644 --- a/charts/catalogkubewaredev-mongodbbinding-editor/README.md +++ b/charts/catalogkubewaredev-mongodbbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-mongodbbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogkubewaredev-mongodbbinding-editor appscode/catalogkubewaredev-mongodbbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubewaredev-mongodbbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogkubewaredev-mongodbbinding-editor appscode/catalogkubewaredev-mongodbbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBBinding Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `catalogkubewaredev-mongodbbinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-mongodbbinding-editor appscode/catalogkubewaredev-mongodbbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubewaredev-mongodbbinding-editor appscode/catalogkubewaredev-mongodbbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MongoDBBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-mongodbbinding-editor appscode/catalogkubewaredev-mongodbbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-mongodbbinding-editor appscode/catalogkubewaredev-mongodbbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-mongodbbinding-editor appscode/catalogkubewaredev-mongodbbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-mongodbbinding-editor appscode/catalogkubewaredev-mongodbbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-mysqlbinding-editor/Chart.yaml b/charts/catalogkubewaredev-mysqlbinding-editor/Chart.yaml index f324f5bc62..2fe1a294ea 100644 --- a/charts/catalogkubewaredev-mysqlbinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-mysqlbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"mysqlbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MySQLBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-mysqlbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubewaredev-mysqlbinding-editor/README.md b/charts/catalogkubewaredev-mysqlbinding-editor/README.md index 23bb22bf49..8c8861a7f3 100644 --- a/charts/catalogkubewaredev-mysqlbinding-editor/README.md +++ b/charts/catalogkubewaredev-mysqlbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-mysqlbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogkubewaredev-mysqlbinding-editor appscode/catalogkubewaredev-mysqlbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubewaredev-mysqlbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogkubewaredev-mysqlbinding-editor appscode/catalogkubewaredev-mysqlbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLBinding Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogkubewaredev-mysqlbinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-mysqlbinding-editor appscode/catalogkubewaredev-mysqlbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubewaredev-mysqlbinding-editor appscode/catalogkubewaredev-mysqlbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MySQLBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-mysqlbinding-editor appscode/catalogkubewaredev-mysqlbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-mysqlbinding-editor appscode/catalogkubewaredev-mysqlbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-mysqlbinding-editor appscode/catalogkubewaredev-mysqlbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-mysqlbinding-editor appscode/catalogkubewaredev-mysqlbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-perconaxtradbbinding-editor/Chart.yaml b/charts/catalogkubewaredev-perconaxtradbbinding-editor/Chart.yaml index 342b6f930b..741434bbb5 100644 --- a/charts/catalogkubewaredev-perconaxtradbbinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-perconaxtradbbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"perconaxtradbbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PerconaXtraDBBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-perconaxtradbbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubewaredev-perconaxtradbbinding-editor/README.md b/charts/catalogkubewaredev-perconaxtradbbinding-editor/README.md index 37169a172c..a39ca05f6a 100644 --- a/charts/catalogkubewaredev-perconaxtradbbinding-editor/README.md +++ b/charts/catalogkubewaredev-perconaxtradbbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-perconaxtradbbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogkubewaredev-perconaxtradbbinding-editor appscode/catalogkubewaredev-perconaxtradbbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubewaredev-perconaxtradbbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogkubewaredev-perconaxtradbbinding-editor appscode/catalogkubewaredev-perconaxtradbbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PerconaXtraDBBinding Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `catalogkubewaredev-perconaxtradbbinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-perconaxtradbbinding-editor appscode/catalogkubewaredev-perconaxtradbbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubewaredev-perconaxtradbbinding-editor appscode/catalogkubewaredev-perconaxtradbbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PerconaXtraDBBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-perconaxtradbbinding-editor appscode/catalogkubewaredev-perconaxtradbbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-perconaxtradbbinding-editor appscode/catalogkubewaredev-perconaxtradbbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-perconaxtradbbinding-editor appscode/catalogkubewaredev-perconaxtradbbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-perconaxtradbbinding-editor appscode/catalogkubewaredev-perconaxtradbbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-pgbouncerbinding-editor/Chart.yaml b/charts/catalogkubewaredev-pgbouncerbinding-editor/Chart.yaml index ce70fe0b7a..cc0b9038bc 100644 --- a/charts/catalogkubewaredev-pgbouncerbinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-pgbouncerbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"pgbouncerbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PgBouncerBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-pgbouncerbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubewaredev-pgbouncerbinding-editor/README.md b/charts/catalogkubewaredev-pgbouncerbinding-editor/README.md index fe31574bdf..ae786f8f49 100644 --- a/charts/catalogkubewaredev-pgbouncerbinding-editor/README.md +++ b/charts/catalogkubewaredev-pgbouncerbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-pgbouncerbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogkubewaredev-pgbouncerbinding-editor appscode/catalogkubewaredev-pgbouncerbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubewaredev-pgbouncerbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogkubewaredev-pgbouncerbinding-editor appscode/catalogkubewaredev-pgbouncerbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncerBinding Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogkubewaredev-pgbouncerbinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-pgbouncerbinding-editor appscode/catalogkubewaredev-pgbouncerbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubewaredev-pgbouncerbinding-editor appscode/catalogkubewaredev-pgbouncerbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PgBouncerBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-pgbouncerbinding-editor appscode/catalogkubewaredev-pgbouncerbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-pgbouncerbinding-editor appscode/catalogkubewaredev-pgbouncerbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-pgbouncerbinding-editor appscode/catalogkubewaredev-pgbouncerbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-pgbouncerbinding-editor appscode/catalogkubewaredev-pgbouncerbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-postgresbinding-editor/Chart.yaml b/charts/catalogkubewaredev-postgresbinding-editor/Chart.yaml index 6016d2adcf..826498aade 100644 --- a/charts/catalogkubewaredev-postgresbinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-postgresbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"postgresbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PostgresBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-postgresbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubewaredev-postgresbinding-editor/README.md b/charts/catalogkubewaredev-postgresbinding-editor/README.md index 3578014d29..e0efbe11d5 100644 --- a/charts/catalogkubewaredev-postgresbinding-editor/README.md +++ b/charts/catalogkubewaredev-postgresbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-postgresbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogkubewaredev-postgresbinding-editor appscode/catalogkubewaredev-postgresbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubewaredev-postgresbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogkubewaredev-postgresbinding-editor appscode/catalogkubewaredev-postgresbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresBinding Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `catalogkubewaredev-postgresbinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-postgresbinding-editor appscode/catalogkubewaredev-postgresbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubewaredev-postgresbinding-editor appscode/catalogkubewaredev-postgresbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PostgresBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-postgresbinding-editor appscode/catalogkubewaredev-postgresbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-postgresbinding-editor appscode/catalogkubewaredev-postgresbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-postgresbinding-editor appscode/catalogkubewaredev-postgresbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-postgresbinding-editor appscode/catalogkubewaredev-postgresbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-proxysqlbinding-editor/Chart.yaml b/charts/catalogkubewaredev-proxysqlbinding-editor/Chart.yaml index 9afae3e0dd..503031ad80 100644 --- a/charts/catalogkubewaredev-proxysqlbinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-proxysqlbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"proxysqlbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProxySQLBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-proxysqlbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubewaredev-proxysqlbinding-editor/README.md b/charts/catalogkubewaredev-proxysqlbinding-editor/README.md index 3b2ec541a3..53a9ad299a 100644 --- a/charts/catalogkubewaredev-proxysqlbinding-editor/README.md +++ b/charts/catalogkubewaredev-proxysqlbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-proxysqlbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogkubewaredev-proxysqlbinding-editor appscode/catalogkubewaredev-proxysqlbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubewaredev-proxysqlbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogkubewaredev-proxysqlbinding-editor appscode/catalogkubewaredev-proxysqlbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQLBinding Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `catalogkubewaredev-proxysqlbinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-proxysqlbinding-editor appscode/catalogkubewaredev-proxysqlbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubewaredev-proxysqlbinding-editor appscode/catalogkubewaredev-proxysqlbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProxySQLBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-proxysqlbinding-editor appscode/catalogkubewaredev-proxysqlbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-proxysqlbinding-editor appscode/catalogkubewaredev-proxysqlbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-proxysqlbinding-editor appscode/catalogkubewaredev-proxysqlbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-proxysqlbinding-editor appscode/catalogkubewaredev-proxysqlbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-redisbinding-editor/Chart.yaml b/charts/catalogkubewaredev-redisbinding-editor/Chart.yaml index 0353f5c3de..b82ea973dc 100644 --- a/charts/catalogkubewaredev-redisbinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-redisbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"redisbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RedisBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-redisbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/catalogkubewaredev-redisbinding-editor/README.md b/charts/catalogkubewaredev-redisbinding-editor/README.md index 8537655162..a75f892299 100644 --- a/charts/catalogkubewaredev-redisbinding-editor/README.md +++ b/charts/catalogkubewaredev-redisbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-redisbinding-editor --version=v0.38.0 -$ helm upgrade -i catalogkubewaredev-redisbinding-editor appscode/catalogkubewaredev-redisbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/catalogkubewaredev-redisbinding-editor --version=v0.39.0 +$ helm upgrade -i catalogkubewaredev-redisbinding-editor appscode/catalogkubewaredev-redisbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisBinding Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogkubewaredev-redisbinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-redisbinding-editor appscode/catalogkubewaredev-redisbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i catalogkubewaredev-redisbinding-editor appscode/catalogkubewaredev-redisbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RedisBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-redisbinding-editor appscode/catalogkubewaredev-redisbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-redisbinding-editor appscode/catalogkubewaredev-redisbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-redisbinding-editor appscode/catalogkubewaredev-redisbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-redisbinding-editor appscode/catalogkubewaredev-redisbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/certificatesk8sio-certificatesigningrequest-editor/Chart.yaml b/charts/certificatesk8sio-certificatesigningrequest-editor/Chart.yaml index 3f36762c85..9a536643c3 100644 --- a/charts/certificatesk8sio-certificatesigningrequest-editor/Chart.yaml +++ b/charts/certificatesk8sio-certificatesigningrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"certificates.k8s.io","version":"v1","resource":"certificatesigningrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: CertificateSigningRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: certificatesk8sio-certificatesigningrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/certificatesk8sio-certificatesigningrequest-editor/README.md b/charts/certificatesk8sio-certificatesigningrequest-editor/README.md index 62e37ec71d..69bd6ebf18 100644 --- a/charts/certificatesk8sio-certificatesigningrequest-editor/README.md +++ b/charts/certificatesk8sio-certificatesigningrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/certificatesk8sio-certificatesigningrequest-editor --version=v0.38.0 -$ helm upgrade -i certificatesk8sio-certificatesigningrequest-editor appscode/certificatesk8sio-certificatesigningrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/certificatesk8sio-certificatesigningrequest-editor --version=v0.39.0 +$ helm upgrade -i certificatesk8sio-certificatesigningrequest-editor appscode/certificatesk8sio-certificatesigningrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CertificateSigningRequest Editor on a [Kubernetes](http://k To install/upgrade the chart with the release name `certificatesk8sio-certificatesigningrequest-editor`: ```bash -$ helm upgrade -i certificatesk8sio-certificatesigningrequest-editor appscode/certificatesk8sio-certificatesigningrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i certificatesk8sio-certificatesigningrequest-editor appscode/certificatesk8sio-certificatesigningrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a CertificateSigningRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `certificatesk8sio- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i certificatesk8sio-certificatesigningrequest-editor appscode/certificatesk8sio-certificatesigningrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=certificates.k8s.io/v1 +$ helm upgrade -i certificatesk8sio-certificatesigningrequest-editor appscode/certificatesk8sio-certificatesigningrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=certificates.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i certificatesk8sio-certificatesigningrequest-editor appscode/certificatesk8sio-certificatesigningrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i certificatesk8sio-certificatesigningrequest-editor appscode/certificatesk8sio-certificatesigningrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/certmanagerio-certificate-editor/Chart.yaml b/charts/certmanagerio-certificate-editor/Chart.yaml index 6d238c9298..28bd9c1241 100644 --- a/charts/certmanagerio-certificate-editor/Chart.yaml +++ b/charts/certmanagerio-certificate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cert-manager.io","version":"v1","resource":"certificates"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Certificate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: certmanagerio-certificate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/certmanagerio-certificate-editor/README.md b/charts/certmanagerio-certificate-editor/README.md index fcbd079a0e..39d02b81e6 100644 --- a/charts/certmanagerio-certificate-editor/README.md +++ b/charts/certmanagerio-certificate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/certmanagerio-certificate-editor --version=v0.38.0 -$ helm upgrade -i certmanagerio-certificate-editor appscode/certmanagerio-certificate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/certmanagerio-certificate-editor --version=v0.39.0 +$ helm upgrade -i certmanagerio-certificate-editor appscode/certmanagerio-certificate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Certificate Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `certmanagerio-certificate-editor`: ```bash -$ helm upgrade -i certmanagerio-certificate-editor appscode/certmanagerio-certificate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i certmanagerio-certificate-editor appscode/certmanagerio-certificate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Certificate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `certmanagerio-cert Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i certmanagerio-certificate-editor appscode/certmanagerio-certificate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cert-manager.io/v1 +$ helm upgrade -i certmanagerio-certificate-editor appscode/certmanagerio-certificate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cert-manager.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i certmanagerio-certificate-editor appscode/certmanagerio-certificate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i certmanagerio-certificate-editor appscode/certmanagerio-certificate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/certmanagerio-certificaterequest-editor/Chart.yaml b/charts/certmanagerio-certificaterequest-editor/Chart.yaml index fb9681ddbf..38b75763ca 100644 --- a/charts/certmanagerio-certificaterequest-editor/Chart.yaml +++ b/charts/certmanagerio-certificaterequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cert-manager.io","version":"v1","resource":"certificaterequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: CertificateRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: certmanagerio-certificaterequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/certmanagerio-certificaterequest-editor/README.md b/charts/certmanagerio-certificaterequest-editor/README.md index b2fa6c3342..ac64e00bf2 100644 --- a/charts/certmanagerio-certificaterequest-editor/README.md +++ b/charts/certmanagerio-certificaterequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/certmanagerio-certificaterequest-editor --version=v0.38.0 -$ helm upgrade -i certmanagerio-certificaterequest-editor appscode/certmanagerio-certificaterequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/certmanagerio-certificaterequest-editor --version=v0.39.0 +$ helm upgrade -i certmanagerio-certificaterequest-editor appscode/certmanagerio-certificaterequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CertificateRequest Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `certmanagerio-certificaterequest-editor`: ```bash -$ helm upgrade -i certmanagerio-certificaterequest-editor appscode/certmanagerio-certificaterequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i certmanagerio-certificaterequest-editor appscode/certmanagerio-certificaterequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a CertificateRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `certmanagerio-cert Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i certmanagerio-certificaterequest-editor appscode/certmanagerio-certificaterequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cert-manager.io/v1 +$ helm upgrade -i certmanagerio-certificaterequest-editor appscode/certmanagerio-certificaterequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cert-manager.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i certmanagerio-certificaterequest-editor appscode/certmanagerio-certificaterequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i certmanagerio-certificaterequest-editor appscode/certmanagerio-certificaterequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/certmanagerio-clusterissuer-editor/Chart.yaml b/charts/certmanagerio-clusterissuer-editor/Chart.yaml index 2ba4ea47d8..e90ba0343e 100644 --- a/charts/certmanagerio-clusterissuer-editor/Chart.yaml +++ b/charts/certmanagerio-clusterissuer-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cert-manager.io","version":"v1","resource":"clusterissuers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterIssuer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: certmanagerio-clusterissuer-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/certmanagerio-clusterissuer-editor/README.md b/charts/certmanagerio-clusterissuer-editor/README.md index 7ceb8256eb..1a392802ae 100644 --- a/charts/certmanagerio-clusterissuer-editor/README.md +++ b/charts/certmanagerio-clusterissuer-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/certmanagerio-clusterissuer-editor --version=v0.38.0 -$ helm upgrade -i certmanagerio-clusterissuer-editor appscode/certmanagerio-clusterissuer-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/certmanagerio-clusterissuer-editor --version=v0.39.0 +$ helm upgrade -i certmanagerio-clusterissuer-editor appscode/certmanagerio-clusterissuer-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterIssuer Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `certmanagerio-clusterissuer-editor`: ```bash -$ helm upgrade -i certmanagerio-clusterissuer-editor appscode/certmanagerio-clusterissuer-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i certmanagerio-clusterissuer-editor appscode/certmanagerio-clusterissuer-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterIssuer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `certmanagerio-clus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i certmanagerio-clusterissuer-editor appscode/certmanagerio-clusterissuer-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cert-manager.io/v1 +$ helm upgrade -i certmanagerio-clusterissuer-editor appscode/certmanagerio-clusterissuer-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cert-manager.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i certmanagerio-clusterissuer-editor appscode/certmanagerio-clusterissuer-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i certmanagerio-clusterissuer-editor appscode/certmanagerio-clusterissuer-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/certmanagerio-issuer-editor/Chart.yaml b/charts/certmanagerio-issuer-editor/Chart.yaml index 649fa87697..2f9b0f6f5e 100644 --- a/charts/certmanagerio-issuer-editor/Chart.yaml +++ b/charts/certmanagerio-issuer-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cert-manager.io","version":"v1","resource":"issuers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Issuer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: certmanagerio-issuer-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/certmanagerio-issuer-editor/README.md b/charts/certmanagerio-issuer-editor/README.md index 16c39014d4..57ec63c14e 100644 --- a/charts/certmanagerio-issuer-editor/README.md +++ b/charts/certmanagerio-issuer-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/certmanagerio-issuer-editor --version=v0.38.0 -$ helm upgrade -i certmanagerio-issuer-editor appscode/certmanagerio-issuer-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/certmanagerio-issuer-editor --version=v0.39.0 +$ helm upgrade -i certmanagerio-issuer-editor appscode/certmanagerio-issuer-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Issuer Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `certmanagerio-issuer-editor`: ```bash -$ helm upgrade -i certmanagerio-issuer-editor appscode/certmanagerio-issuer-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i certmanagerio-issuer-editor appscode/certmanagerio-issuer-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Issuer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `certmanagerio-issu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i certmanagerio-issuer-editor appscode/certmanagerio-issuer-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cert-manager.io/v1 +$ helm upgrade -i certmanagerio-issuer-editor appscode/certmanagerio-issuer-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cert-manager.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i certmanagerio-issuer-editor appscode/certmanagerio-issuer-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i certmanagerio-issuer-editor appscode/certmanagerio-issuer-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/chartsxhelmdev-chartpreset-editor/Chart.yaml b/charts/chartsxhelmdev-chartpreset-editor/Chart.yaml index 3cc3194b60..a9552d02a3 100644 --- a/charts/chartsxhelmdev-chartpreset-editor/Chart.yaml +++ b/charts/chartsxhelmdev-chartpreset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"charts.x-helm.dev","version":"v1alpha1","resource":"chartpresets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ChartPreset Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: chartsxhelmdev-chartpreset-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/chartsxhelmdev-chartpreset-editor/README.md b/charts/chartsxhelmdev-chartpreset-editor/README.md index 3d12ca7c81..bbb81b1df6 100644 --- a/charts/chartsxhelmdev-chartpreset-editor/README.md +++ b/charts/chartsxhelmdev-chartpreset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/chartsxhelmdev-chartpreset-editor --version=v0.38.0 -$ helm upgrade -i chartsxhelmdev-chartpreset-editor appscode/chartsxhelmdev-chartpreset-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/chartsxhelmdev-chartpreset-editor --version=v0.39.0 +$ helm upgrade -i chartsxhelmdev-chartpreset-editor appscode/chartsxhelmdev-chartpreset-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ChartPreset Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `chartsxhelmdev-chartpreset-editor`: ```bash -$ helm upgrade -i chartsxhelmdev-chartpreset-editor appscode/chartsxhelmdev-chartpreset-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i chartsxhelmdev-chartpreset-editor appscode/chartsxhelmdev-chartpreset-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ChartPreset Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `chartsxhelmdev-cha Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i chartsxhelmdev-chartpreset-editor appscode/chartsxhelmdev-chartpreset-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=charts.x-helm.dev/v1alpha1 +$ helm upgrade -i chartsxhelmdev-chartpreset-editor appscode/chartsxhelmdev-chartpreset-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=charts.x-helm.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i chartsxhelmdev-chartpreset-editor appscode/chartsxhelmdev-chartpreset-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i chartsxhelmdev-chartpreset-editor appscode/chartsxhelmdev-chartpreset-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/chartsxhelmdev-clusterchartpreset-editor-options/Chart.yaml b/charts/chartsxhelmdev-clusterchartpreset-editor-options/Chart.yaml index 81e1158d1e..c0cc36dbe7 100644 --- a/charts/chartsxhelmdev-clusterchartpreset-editor-options/Chart.yaml +++ b/charts/chartsxhelmdev-clusterchartpreset-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: chartsxhelmdev-clusterchartpreset-editor-options description: ClusterChartPresets Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/chartsxhelmdev-clusterchartpreset-editor-options/README.md b/charts/chartsxhelmdev-clusterchartpreset-editor-options/README.md index a23de4a687..9330698006 100644 --- a/charts/chartsxhelmdev-clusterchartpreset-editor-options/README.md +++ b/charts/chartsxhelmdev-clusterchartpreset-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/chartsxhelmdev-clusterchartpreset-editor-options --version=v0.38.0 -$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor-options appscode/chartsxhelmdev-clusterchartpreset-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/chartsxhelmdev-clusterchartpreset-editor-options --version=v0.39.0 +$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor-options appscode/chartsxhelmdev-clusterchartpreset-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys A ClusterChartPresets Editor UI Options on a [Kubernetes](htt To install/upgrade the chart with the release name `chartsxhelmdev-clusterchartpreset-editor-options`: ```bash -$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor-options appscode/chartsxhelmdev-clusterchartpreset-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor-options appscode/chartsxhelmdev-clusterchartpreset-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys A ClusterChartPresets Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -132,12 +132,12 @@ The following table lists the configurable parameters of the `chartsxhelmdev-clu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor-options appscode/chartsxhelmdev-clusterchartpreset-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=charts.x-helm.dev +$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor-options appscode/chartsxhelmdev-clusterchartpreset-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=charts.x-helm.dev ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor-options appscode/chartsxhelmdev-clusterchartpreset-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor-options appscode/chartsxhelmdev-clusterchartpreset-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/chartsxhelmdev-clusterchartpreset-editor/Chart.yaml b/charts/chartsxhelmdev-clusterchartpreset-editor/Chart.yaml index dbb53947d6..eecf8a2c5e 100644 --- a/charts/chartsxhelmdev-clusterchartpreset-editor/Chart.yaml +++ b/charts/chartsxhelmdev-clusterchartpreset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"charts.x-helm.dev","version":"v1alpha1","resource":"clusterchartpresets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterChartPreset Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: chartsxhelmdev-clusterchartpreset-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/chartsxhelmdev-clusterchartpreset-editor/README.md b/charts/chartsxhelmdev-clusterchartpreset-editor/README.md index 9e9b80c146..38890c2200 100644 --- a/charts/chartsxhelmdev-clusterchartpreset-editor/README.md +++ b/charts/chartsxhelmdev-clusterchartpreset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/chartsxhelmdev-clusterchartpreset-editor --version=v0.38.0 -$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor appscode/chartsxhelmdev-clusterchartpreset-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/chartsxhelmdev-clusterchartpreset-editor --version=v0.39.0 +$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor appscode/chartsxhelmdev-clusterchartpreset-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterChartPreset Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `chartsxhelmdev-clusterchartpreset-editor`: ```bash -$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor appscode/chartsxhelmdev-clusterchartpreset-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor appscode/chartsxhelmdev-clusterchartpreset-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterChartPreset Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `chartsxhelmdev-clu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor appscode/chartsxhelmdev-clusterchartpreset-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=charts.x-helm.dev/v1alpha1 +$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor appscode/chartsxhelmdev-clusterchartpreset-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=charts.x-helm.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor appscode/chartsxhelmdev-clusterchartpreset-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor appscode/chartsxhelmdev-clusterchartpreset-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/clusteropenclustermanagementio-addonplacementscore-editor/Chart.yaml b/charts/clusteropenclustermanagementio-addonplacementscore-editor/Chart.yaml index 11a93f7556..c1721ea433 100644 --- a/charts/clusteropenclustermanagementio-addonplacementscore-editor/Chart.yaml +++ b/charts/clusteropenclustermanagementio-addonplacementscore-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.open-cluster-management.io","version":"v1alpha1","resource":"addonplacementscores"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AddOnPlacementScore Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusteropenclustermanagementio-addonplacementscore-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/clusteropenclustermanagementio-addonplacementscore-editor/README.md b/charts/clusteropenclustermanagementio-addonplacementscore-editor/README.md index 5c007895c5..1399e51951 100644 --- a/charts/clusteropenclustermanagementio-addonplacementscore-editor/README.md +++ b/charts/clusteropenclustermanagementio-addonplacementscore-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusteropenclustermanagementio-addonplacementscore-editor --version=v0.38.0 -$ helm upgrade -i clusteropenclustermanagementio-addonplacementscore-editor appscode/clusteropenclustermanagementio-addonplacementscore-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/clusteropenclustermanagementio-addonplacementscore-editor --version=v0.39.0 +$ helm upgrade -i clusteropenclustermanagementio-addonplacementscore-editor appscode/clusteropenclustermanagementio-addonplacementscore-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AddOnPlacementScore Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `clusteropenclustermanagementio-addonplacementscore-editor`: ```bash -$ helm upgrade -i clusteropenclustermanagementio-addonplacementscore-editor appscode/clusteropenclustermanagementio-addonplacementscore-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i clusteropenclustermanagementio-addonplacementscore-editor appscode/clusteropenclustermanagementio-addonplacementscore-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AddOnPlacementScore Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusteropencluster Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-addonplacementscore-editor appscode/clusteropenclustermanagementio-addonplacementscore-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cluster.open-cluster-management.io/v1alpha1 +$ helm upgrade -i clusteropenclustermanagementio-addonplacementscore-editor appscode/clusteropenclustermanagementio-addonplacementscore-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cluster.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-addonplacementscore-editor appscode/clusteropenclustermanagementio-addonplacementscore-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i clusteropenclustermanagementio-addonplacementscore-editor appscode/clusteropenclustermanagementio-addonplacementscore-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/clusteropenclustermanagementio-clusterclaim-editor/Chart.yaml b/charts/clusteropenclustermanagementio-clusterclaim-editor/Chart.yaml index 8c4c5028bb..2cf85bbf59 100644 --- a/charts/clusteropenclustermanagementio-clusterclaim-editor/Chart.yaml +++ b/charts/clusteropenclustermanagementio-clusterclaim-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.open-cluster-management.io","version":"v1alpha1","resource":"clusterclaims"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterClaim Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusteropenclustermanagementio-clusterclaim-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/clusteropenclustermanagementio-clusterclaim-editor/README.md b/charts/clusteropenclustermanagementio-clusterclaim-editor/README.md index 7de113817c..1400887629 100644 --- a/charts/clusteropenclustermanagementio-clusterclaim-editor/README.md +++ b/charts/clusteropenclustermanagementio-clusterclaim-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusteropenclustermanagementio-clusterclaim-editor --version=v0.38.0 -$ helm upgrade -i clusteropenclustermanagementio-clusterclaim-editor appscode/clusteropenclustermanagementio-clusterclaim-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/clusteropenclustermanagementio-clusterclaim-editor --version=v0.39.0 +$ helm upgrade -i clusteropenclustermanagementio-clusterclaim-editor appscode/clusteropenclustermanagementio-clusterclaim-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterClaim Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `clusteropenclustermanagementio-clusterclaim-editor`: ```bash -$ helm upgrade -i clusteropenclustermanagementio-clusterclaim-editor appscode/clusteropenclustermanagementio-clusterclaim-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i clusteropenclustermanagementio-clusterclaim-editor appscode/clusteropenclustermanagementio-clusterclaim-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterClaim Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusteropencluster Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-clusterclaim-editor appscode/clusteropenclustermanagementio-clusterclaim-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cluster.open-cluster-management.io/v1alpha1 +$ helm upgrade -i clusteropenclustermanagementio-clusterclaim-editor appscode/clusteropenclustermanagementio-clusterclaim-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cluster.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-clusterclaim-editor appscode/clusteropenclustermanagementio-clusterclaim-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i clusteropenclustermanagementio-clusterclaim-editor appscode/clusteropenclustermanagementio-clusterclaim-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/clusteropenclustermanagementio-managedcluster-editor/Chart.yaml b/charts/clusteropenclustermanagementio-managedcluster-editor/Chart.yaml index 5c124f5f68..1609741b98 100644 --- a/charts/clusteropenclustermanagementio-managedcluster-editor/Chart.yaml +++ b/charts/clusteropenclustermanagementio-managedcluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.open-cluster-management.io","version":"v1","resource":"managedclusters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ManagedCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusteropenclustermanagementio-managedcluster-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/clusteropenclustermanagementio-managedcluster-editor/README.md b/charts/clusteropenclustermanagementio-managedcluster-editor/README.md index 5c54b72b97..a5f295fd13 100644 --- a/charts/clusteropenclustermanagementio-managedcluster-editor/README.md +++ b/charts/clusteropenclustermanagementio-managedcluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusteropenclustermanagementio-managedcluster-editor --version=v0.38.0 -$ helm upgrade -i clusteropenclustermanagementio-managedcluster-editor appscode/clusteropenclustermanagementio-managedcluster-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/clusteropenclustermanagementio-managedcluster-editor --version=v0.39.0 +$ helm upgrade -i clusteropenclustermanagementio-managedcluster-editor appscode/clusteropenclustermanagementio-managedcluster-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManagedCluster Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `clusteropenclustermanagementio-managedcluster-editor`: ```bash -$ helm upgrade -i clusteropenclustermanagementio-managedcluster-editor appscode/clusteropenclustermanagementio-managedcluster-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i clusteropenclustermanagementio-managedcluster-editor appscode/clusteropenclustermanagementio-managedcluster-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ManagedCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusteropencluster Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-managedcluster-editor appscode/clusteropenclustermanagementio-managedcluster-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cluster.open-cluster-management.io/v1 +$ helm upgrade -i clusteropenclustermanagementio-managedcluster-editor appscode/clusteropenclustermanagementio-managedcluster-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cluster.open-cluster-management.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-managedcluster-editor appscode/clusteropenclustermanagementio-managedcluster-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i clusteropenclustermanagementio-managedcluster-editor appscode/clusteropenclustermanagementio-managedcluster-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/clusteropenclustermanagementio-managedclusterset-editor/Chart.yaml b/charts/clusteropenclustermanagementio-managedclusterset-editor/Chart.yaml index 49b1b00361..d0a3aa0a9f 100644 --- a/charts/clusteropenclustermanagementio-managedclusterset-editor/Chart.yaml +++ b/charts/clusteropenclustermanagementio-managedclusterset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.open-cluster-management.io","version":"v1beta2","resource":"managedclustersets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ManagedClusterSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusteropenclustermanagementio-managedclusterset-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/clusteropenclustermanagementio-managedclusterset-editor/README.md b/charts/clusteropenclustermanagementio-managedclusterset-editor/README.md index 943b15fd64..642384b85c 100644 --- a/charts/clusteropenclustermanagementio-managedclusterset-editor/README.md +++ b/charts/clusteropenclustermanagementio-managedclusterset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusteropenclustermanagementio-managedclusterset-editor --version=v0.38.0 -$ helm upgrade -i clusteropenclustermanagementio-managedclusterset-editor appscode/clusteropenclustermanagementio-managedclusterset-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/clusteropenclustermanagementio-managedclusterset-editor --version=v0.39.0 +$ helm upgrade -i clusteropenclustermanagementio-managedclusterset-editor appscode/clusteropenclustermanagementio-managedclusterset-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManagedClusterSet Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `clusteropenclustermanagementio-managedclusterset-editor`: ```bash -$ helm upgrade -i clusteropenclustermanagementio-managedclusterset-editor appscode/clusteropenclustermanagementio-managedclusterset-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i clusteropenclustermanagementio-managedclusterset-editor appscode/clusteropenclustermanagementio-managedclusterset-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ManagedClusterSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusteropencluster Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-managedclusterset-editor appscode/clusteropenclustermanagementio-managedclusterset-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cluster.open-cluster-management.io/v1beta2 +$ helm upgrade -i clusteropenclustermanagementio-managedclusterset-editor appscode/clusteropenclustermanagementio-managedclusterset-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cluster.open-cluster-management.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-managedclusterset-editor appscode/clusteropenclustermanagementio-managedclusterset-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i clusteropenclustermanagementio-managedclusterset-editor appscode/clusteropenclustermanagementio-managedclusterset-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/clusteropenclustermanagementio-managedclustersetbinding-editor/Chart.yaml b/charts/clusteropenclustermanagementio-managedclustersetbinding-editor/Chart.yaml index 7c2040f130..167aeeecf8 100644 --- a/charts/clusteropenclustermanagementio-managedclustersetbinding-editor/Chart.yaml +++ b/charts/clusteropenclustermanagementio-managedclustersetbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.open-cluster-management.io","version":"v1beta2","resource":"managedclustersetbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ManagedClusterSetBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusteropenclustermanagementio-managedclustersetbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/clusteropenclustermanagementio-managedclustersetbinding-editor/README.md b/charts/clusteropenclustermanagementio-managedclustersetbinding-editor/README.md index f0786e14ed..2d2e903a4c 100644 --- a/charts/clusteropenclustermanagementio-managedclustersetbinding-editor/README.md +++ b/charts/clusteropenclustermanagementio-managedclustersetbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusteropenclustermanagementio-managedclustersetbinding-editor --version=v0.38.0 -$ helm upgrade -i clusteropenclustermanagementio-managedclustersetbinding-editor appscode/clusteropenclustermanagementio-managedclustersetbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/clusteropenclustermanagementio-managedclustersetbinding-editor --version=v0.39.0 +$ helm upgrade -i clusteropenclustermanagementio-managedclustersetbinding-editor appscode/clusteropenclustermanagementio-managedclustersetbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManagedClusterSetBinding Editor on a [Kubernetes](http://ku To install/upgrade the chart with the release name `clusteropenclustermanagementio-managedclustersetbinding-editor`: ```bash -$ helm upgrade -i clusteropenclustermanagementio-managedclustersetbinding-editor appscode/clusteropenclustermanagementio-managedclustersetbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i clusteropenclustermanagementio-managedclustersetbinding-editor appscode/clusteropenclustermanagementio-managedclustersetbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ManagedClusterSetBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusteropencluster Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-managedclustersetbinding-editor appscode/clusteropenclustermanagementio-managedclustersetbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cluster.open-cluster-management.io/v1beta2 +$ helm upgrade -i clusteropenclustermanagementio-managedclustersetbinding-editor appscode/clusteropenclustermanagementio-managedclustersetbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cluster.open-cluster-management.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-managedclustersetbinding-editor appscode/clusteropenclustermanagementio-managedclustersetbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i clusteropenclustermanagementio-managedclustersetbinding-editor appscode/clusteropenclustermanagementio-managedclustersetbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/clusteropenclustermanagementio-placement-editor/Chart.yaml b/charts/clusteropenclustermanagementio-placement-editor/Chart.yaml index 9fefe87697..c63c4ef00b 100644 --- a/charts/clusteropenclustermanagementio-placement-editor/Chart.yaml +++ b/charts/clusteropenclustermanagementio-placement-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.open-cluster-management.io","version":"v1beta1","resource":"placements"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Placement Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusteropenclustermanagementio-placement-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/clusteropenclustermanagementio-placement-editor/README.md b/charts/clusteropenclustermanagementio-placement-editor/README.md index 0b4b79dad7..be974f1a5b 100644 --- a/charts/clusteropenclustermanagementio-placement-editor/README.md +++ b/charts/clusteropenclustermanagementio-placement-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusteropenclustermanagementio-placement-editor --version=v0.38.0 -$ helm upgrade -i clusteropenclustermanagementio-placement-editor appscode/clusteropenclustermanagementio-placement-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/clusteropenclustermanagementio-placement-editor --version=v0.39.0 +$ helm upgrade -i clusteropenclustermanagementio-placement-editor appscode/clusteropenclustermanagementio-placement-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Placement Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `clusteropenclustermanagementio-placement-editor`: ```bash -$ helm upgrade -i clusteropenclustermanagementio-placement-editor appscode/clusteropenclustermanagementio-placement-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i clusteropenclustermanagementio-placement-editor appscode/clusteropenclustermanagementio-placement-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Placement Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusteropencluster Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-placement-editor appscode/clusteropenclustermanagementio-placement-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cluster.open-cluster-management.io/v1beta1 +$ helm upgrade -i clusteropenclustermanagementio-placement-editor appscode/clusteropenclustermanagementio-placement-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cluster.open-cluster-management.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-placement-editor appscode/clusteropenclustermanagementio-placement-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i clusteropenclustermanagementio-placement-editor appscode/clusteropenclustermanagementio-placement-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/clusteropenclustermanagementio-placementdecision-editor/Chart.yaml b/charts/clusteropenclustermanagementio-placementdecision-editor/Chart.yaml index 3379e5430c..eea69a59f9 100644 --- a/charts/clusteropenclustermanagementio-placementdecision-editor/Chart.yaml +++ b/charts/clusteropenclustermanagementio-placementdecision-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.open-cluster-management.io","version":"v1beta1","resource":"placementdecisions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PlacementDecision Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusteropenclustermanagementio-placementdecision-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/clusteropenclustermanagementio-placementdecision-editor/README.md b/charts/clusteropenclustermanagementio-placementdecision-editor/README.md index bd7055bc26..6d19cace0f 100644 --- a/charts/clusteropenclustermanagementio-placementdecision-editor/README.md +++ b/charts/clusteropenclustermanagementio-placementdecision-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusteropenclustermanagementio-placementdecision-editor --version=v0.38.0 -$ helm upgrade -i clusteropenclustermanagementio-placementdecision-editor appscode/clusteropenclustermanagementio-placementdecision-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/clusteropenclustermanagementio-placementdecision-editor --version=v0.39.0 +$ helm upgrade -i clusteropenclustermanagementio-placementdecision-editor appscode/clusteropenclustermanagementio-placementdecision-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PlacementDecision Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `clusteropenclustermanagementio-placementdecision-editor`: ```bash -$ helm upgrade -i clusteropenclustermanagementio-placementdecision-editor appscode/clusteropenclustermanagementio-placementdecision-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i clusteropenclustermanagementio-placementdecision-editor appscode/clusteropenclustermanagementio-placementdecision-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PlacementDecision Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusteropencluster Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-placementdecision-editor appscode/clusteropenclustermanagementio-placementdecision-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cluster.open-cluster-management.io/v1beta1 +$ helm upgrade -i clusteropenclustermanagementio-placementdecision-editor appscode/clusteropenclustermanagementio-placementdecision-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cluster.open-cluster-management.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-placementdecision-editor appscode/clusteropenclustermanagementio-placementdecision-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i clusteropenclustermanagementio-placementdecision-editor appscode/clusteropenclustermanagementio-placementdecision-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/clusterxk8sio-cluster-editor/Chart.yaml b/charts/clusterxk8sio-cluster-editor/Chart.yaml index 2ea217baef..b572b6f1df 100644 --- a/charts/clusterxk8sio-cluster-editor/Chart.yaml +++ b/charts/clusterxk8sio-cluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.x-k8s.io","version":"v1beta1","resource":"clusters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Cluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusterxk8sio-cluster-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/clusterxk8sio-cluster-editor/README.md b/charts/clusterxk8sio-cluster-editor/README.md index 04db43d3e6..7b66b32055 100644 --- a/charts/clusterxk8sio-cluster-editor/README.md +++ b/charts/clusterxk8sio-cluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusterxk8sio-cluster-editor --version=v0.38.0 -$ helm upgrade -i clusterxk8sio-cluster-editor appscode/clusterxk8sio-cluster-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/clusterxk8sio-cluster-editor --version=v0.39.0 +$ helm upgrade -i clusterxk8sio-cluster-editor appscode/clusterxk8sio-cluster-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Cluster Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `clusterxk8sio-cluster-editor`: ```bash -$ helm upgrade -i clusterxk8sio-cluster-editor appscode/clusterxk8sio-cluster-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i clusterxk8sio-cluster-editor appscode/clusterxk8sio-cluster-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Cluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusterxk8sio-clus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusterxk8sio-cluster-editor appscode/clusterxk8sio-cluster-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cluster.x-k8s.io/v1beta1 +$ helm upgrade -i clusterxk8sio-cluster-editor appscode/clusterxk8sio-cluster-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusterxk8sio-cluster-editor appscode/clusterxk8sio-cluster-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i clusterxk8sio-cluster-editor appscode/clusterxk8sio-cluster-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/clusterxk8sio-clusterclass-editor/Chart.yaml b/charts/clusterxk8sio-clusterclass-editor/Chart.yaml index f782f6f584..5bf7825d86 100644 --- a/charts/clusterxk8sio-clusterclass-editor/Chart.yaml +++ b/charts/clusterxk8sio-clusterclass-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.x-k8s.io","version":"v1beta1","resource":"clusterclasses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterClass Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusterxk8sio-clusterclass-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/clusterxk8sio-clusterclass-editor/README.md b/charts/clusterxk8sio-clusterclass-editor/README.md index 1612df6013..d787c7ff38 100644 --- a/charts/clusterxk8sio-clusterclass-editor/README.md +++ b/charts/clusterxk8sio-clusterclass-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusterxk8sio-clusterclass-editor --version=v0.38.0 -$ helm upgrade -i clusterxk8sio-clusterclass-editor appscode/clusterxk8sio-clusterclass-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/clusterxk8sio-clusterclass-editor --version=v0.39.0 +$ helm upgrade -i clusterxk8sio-clusterclass-editor appscode/clusterxk8sio-clusterclass-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterClass Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `clusterxk8sio-clusterclass-editor`: ```bash -$ helm upgrade -i clusterxk8sio-clusterclass-editor appscode/clusterxk8sio-clusterclass-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i clusterxk8sio-clusterclass-editor appscode/clusterxk8sio-clusterclass-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterClass Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusterxk8sio-clus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusterxk8sio-clusterclass-editor appscode/clusterxk8sio-clusterclass-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cluster.x-k8s.io/v1beta1 +$ helm upgrade -i clusterxk8sio-clusterclass-editor appscode/clusterxk8sio-clusterclass-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusterxk8sio-clusterclass-editor appscode/clusterxk8sio-clusterclass-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i clusterxk8sio-clusterclass-editor appscode/clusterxk8sio-clusterclass-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/clusterxk8sio-machine-editor/Chart.yaml b/charts/clusterxk8sio-machine-editor/Chart.yaml index 6e0d4bb281..90badf632f 100644 --- a/charts/clusterxk8sio-machine-editor/Chart.yaml +++ b/charts/clusterxk8sio-machine-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.x-k8s.io","version":"v1beta1","resource":"machines"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Machine Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusterxk8sio-machine-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/clusterxk8sio-machine-editor/README.md b/charts/clusterxk8sio-machine-editor/README.md index 0fd95c94f0..5d3c66830e 100644 --- a/charts/clusterxk8sio-machine-editor/README.md +++ b/charts/clusterxk8sio-machine-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusterxk8sio-machine-editor --version=v0.38.0 -$ helm upgrade -i clusterxk8sio-machine-editor appscode/clusterxk8sio-machine-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/clusterxk8sio-machine-editor --version=v0.39.0 +$ helm upgrade -i clusterxk8sio-machine-editor appscode/clusterxk8sio-machine-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Machine Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `clusterxk8sio-machine-editor`: ```bash -$ helm upgrade -i clusterxk8sio-machine-editor appscode/clusterxk8sio-machine-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i clusterxk8sio-machine-editor appscode/clusterxk8sio-machine-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Machine Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusterxk8sio-mach Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusterxk8sio-machine-editor appscode/clusterxk8sio-machine-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cluster.x-k8s.io/v1beta1 +$ helm upgrade -i clusterxk8sio-machine-editor appscode/clusterxk8sio-machine-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusterxk8sio-machine-editor appscode/clusterxk8sio-machine-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i clusterxk8sio-machine-editor appscode/clusterxk8sio-machine-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/clusterxk8sio-machinedeployment-editor/Chart.yaml b/charts/clusterxk8sio-machinedeployment-editor/Chart.yaml index a573e2d502..ea21e33a07 100644 --- a/charts/clusterxk8sio-machinedeployment-editor/Chart.yaml +++ b/charts/clusterxk8sio-machinedeployment-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.x-k8s.io","version":"v1beta1","resource":"machinedeployments"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MachineDeployment Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusterxk8sio-machinedeployment-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/clusterxk8sio-machinedeployment-editor/README.md b/charts/clusterxk8sio-machinedeployment-editor/README.md index 000118db0a..19c8d1acd0 100644 --- a/charts/clusterxk8sio-machinedeployment-editor/README.md +++ b/charts/clusterxk8sio-machinedeployment-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusterxk8sio-machinedeployment-editor --version=v0.38.0 -$ helm upgrade -i clusterxk8sio-machinedeployment-editor appscode/clusterxk8sio-machinedeployment-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/clusterxk8sio-machinedeployment-editor --version=v0.39.0 +$ helm upgrade -i clusterxk8sio-machinedeployment-editor appscode/clusterxk8sio-machinedeployment-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MachineDeployment Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `clusterxk8sio-machinedeployment-editor`: ```bash -$ helm upgrade -i clusterxk8sio-machinedeployment-editor appscode/clusterxk8sio-machinedeployment-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i clusterxk8sio-machinedeployment-editor appscode/clusterxk8sio-machinedeployment-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MachineDeployment Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusterxk8sio-mach Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusterxk8sio-machinedeployment-editor appscode/clusterxk8sio-machinedeployment-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cluster.x-k8s.io/v1beta1 +$ helm upgrade -i clusterxk8sio-machinedeployment-editor appscode/clusterxk8sio-machinedeployment-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusterxk8sio-machinedeployment-editor appscode/clusterxk8sio-machinedeployment-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i clusterxk8sio-machinedeployment-editor appscode/clusterxk8sio-machinedeployment-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/clusterxk8sio-machinehealthcheck-editor/Chart.yaml b/charts/clusterxk8sio-machinehealthcheck-editor/Chart.yaml index 74cf76a003..6e385d82ce 100644 --- a/charts/clusterxk8sio-machinehealthcheck-editor/Chart.yaml +++ b/charts/clusterxk8sio-machinehealthcheck-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.x-k8s.io","version":"v1beta1","resource":"machinehealthchecks"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MachineHealthCheck Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusterxk8sio-machinehealthcheck-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/clusterxk8sio-machinehealthcheck-editor/README.md b/charts/clusterxk8sio-machinehealthcheck-editor/README.md index 51ac8f508b..26fd18ecde 100644 --- a/charts/clusterxk8sio-machinehealthcheck-editor/README.md +++ b/charts/clusterxk8sio-machinehealthcheck-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusterxk8sio-machinehealthcheck-editor --version=v0.38.0 -$ helm upgrade -i clusterxk8sio-machinehealthcheck-editor appscode/clusterxk8sio-machinehealthcheck-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/clusterxk8sio-machinehealthcheck-editor --version=v0.39.0 +$ helm upgrade -i clusterxk8sio-machinehealthcheck-editor appscode/clusterxk8sio-machinehealthcheck-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MachineHealthCheck Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `clusterxk8sio-machinehealthcheck-editor`: ```bash -$ helm upgrade -i clusterxk8sio-machinehealthcheck-editor appscode/clusterxk8sio-machinehealthcheck-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i clusterxk8sio-machinehealthcheck-editor appscode/clusterxk8sio-machinehealthcheck-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MachineHealthCheck Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusterxk8sio-mach Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusterxk8sio-machinehealthcheck-editor appscode/clusterxk8sio-machinehealthcheck-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cluster.x-k8s.io/v1beta1 +$ helm upgrade -i clusterxk8sio-machinehealthcheck-editor appscode/clusterxk8sio-machinehealthcheck-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusterxk8sio-machinehealthcheck-editor appscode/clusterxk8sio-machinehealthcheck-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i clusterxk8sio-machinehealthcheck-editor appscode/clusterxk8sio-machinehealthcheck-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/clusterxk8sio-machinepool-editor/Chart.yaml b/charts/clusterxk8sio-machinepool-editor/Chart.yaml index 52505d8407..869d12af76 100644 --- a/charts/clusterxk8sio-machinepool-editor/Chart.yaml +++ b/charts/clusterxk8sio-machinepool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.x-k8s.io","version":"v1beta1","resource":"machinepools"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MachinePool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusterxk8sio-machinepool-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/clusterxk8sio-machinepool-editor/README.md b/charts/clusterxk8sio-machinepool-editor/README.md index 707d9cef01..c68fbc8e85 100644 --- a/charts/clusterxk8sio-machinepool-editor/README.md +++ b/charts/clusterxk8sio-machinepool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusterxk8sio-machinepool-editor --version=v0.38.0 -$ helm upgrade -i clusterxk8sio-machinepool-editor appscode/clusterxk8sio-machinepool-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/clusterxk8sio-machinepool-editor --version=v0.39.0 +$ helm upgrade -i clusterxk8sio-machinepool-editor appscode/clusterxk8sio-machinepool-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MachinePool Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `clusterxk8sio-machinepool-editor`: ```bash -$ helm upgrade -i clusterxk8sio-machinepool-editor appscode/clusterxk8sio-machinepool-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i clusterxk8sio-machinepool-editor appscode/clusterxk8sio-machinepool-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MachinePool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusterxk8sio-mach Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusterxk8sio-machinepool-editor appscode/clusterxk8sio-machinepool-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cluster.x-k8s.io/v1beta1 +$ helm upgrade -i clusterxk8sio-machinepool-editor appscode/clusterxk8sio-machinepool-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusterxk8sio-machinepool-editor appscode/clusterxk8sio-machinepool-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i clusterxk8sio-machinepool-editor appscode/clusterxk8sio-machinepool-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/clusterxk8sio-machineset-editor/Chart.yaml b/charts/clusterxk8sio-machineset-editor/Chart.yaml index a4b42f2603..4d8de2fda2 100644 --- a/charts/clusterxk8sio-machineset-editor/Chart.yaml +++ b/charts/clusterxk8sio-machineset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.x-k8s.io","version":"v1beta1","resource":"machinesets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MachineSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusterxk8sio-machineset-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/clusterxk8sio-machineset-editor/README.md b/charts/clusterxk8sio-machineset-editor/README.md index 3d28bdc74a..f79c5886fa 100644 --- a/charts/clusterxk8sio-machineset-editor/README.md +++ b/charts/clusterxk8sio-machineset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusterxk8sio-machineset-editor --version=v0.38.0 -$ helm upgrade -i clusterxk8sio-machineset-editor appscode/clusterxk8sio-machineset-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/clusterxk8sio-machineset-editor --version=v0.39.0 +$ helm upgrade -i clusterxk8sio-machineset-editor appscode/clusterxk8sio-machineset-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MachineSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `clusterxk8sio-machineset-editor`: ```bash -$ helm upgrade -i clusterxk8sio-machineset-editor appscode/clusterxk8sio-machineset-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i clusterxk8sio-machineset-editor appscode/clusterxk8sio-machineset-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MachineSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusterxk8sio-mach Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusterxk8sio-machineset-editor appscode/clusterxk8sio-machineset-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cluster.x-k8s.io/v1beta1 +$ helm upgrade -i clusterxk8sio-machineset-editor appscode/clusterxk8sio-machineset-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusterxk8sio-machineset-editor appscode/clusterxk8sio-machineset-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i clusterxk8sio-machineset-editor appscode/clusterxk8sio-machineset-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/computegcpkubedbcom-firewall-editor/Chart.yaml b/charts/computegcpkubedbcom-firewall-editor/Chart.yaml index 5c462f7b1b..866809098b 100644 --- a/charts/computegcpkubedbcom-firewall-editor/Chart.yaml +++ b/charts/computegcpkubedbcom-firewall-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"compute.gcp.kubedb.com","version":"v1alpha1","resource":"firewalls"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Firewall Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: computegcpkubedbcom-firewall-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/computegcpkubedbcom-firewall-editor/README.md b/charts/computegcpkubedbcom-firewall-editor/README.md index 6276341f90..f0bb76ef40 100644 --- a/charts/computegcpkubedbcom-firewall-editor/README.md +++ b/charts/computegcpkubedbcom-firewall-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/computegcpkubedbcom-firewall-editor --version=v0.38.0 -$ helm upgrade -i computegcpkubedbcom-firewall-editor appscode/computegcpkubedbcom-firewall-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/computegcpkubedbcom-firewall-editor --version=v0.39.0 +$ helm upgrade -i computegcpkubedbcom-firewall-editor appscode/computegcpkubedbcom-firewall-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Firewall Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `computegcpkubedbcom-firewall-editor`: ```bash -$ helm upgrade -i computegcpkubedbcom-firewall-editor appscode/computegcpkubedbcom-firewall-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i computegcpkubedbcom-firewall-editor appscode/computegcpkubedbcom-firewall-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Firewall Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `computegcpkubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i computegcpkubedbcom-firewall-editor appscode/computegcpkubedbcom-firewall-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=compute.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i computegcpkubedbcom-firewall-editor appscode/computegcpkubedbcom-firewall-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=compute.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i computegcpkubedbcom-firewall-editor appscode/computegcpkubedbcom-firewall-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i computegcpkubedbcom-firewall-editor appscode/computegcpkubedbcom-firewall-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/computegcpkubedbcom-network-editor/Chart.yaml b/charts/computegcpkubedbcom-network-editor/Chart.yaml index b7241cc42d..d2d20ded83 100644 --- a/charts/computegcpkubedbcom-network-editor/Chart.yaml +++ b/charts/computegcpkubedbcom-network-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"compute.gcp.kubedb.com","version":"v1alpha1","resource":"networks"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Network Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: computegcpkubedbcom-network-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/computegcpkubedbcom-network-editor/README.md b/charts/computegcpkubedbcom-network-editor/README.md index f3e0b4a41f..254d167025 100644 --- a/charts/computegcpkubedbcom-network-editor/README.md +++ b/charts/computegcpkubedbcom-network-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/computegcpkubedbcom-network-editor --version=v0.38.0 -$ helm upgrade -i computegcpkubedbcom-network-editor appscode/computegcpkubedbcom-network-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/computegcpkubedbcom-network-editor --version=v0.39.0 +$ helm upgrade -i computegcpkubedbcom-network-editor appscode/computegcpkubedbcom-network-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Network Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `computegcpkubedbcom-network-editor`: ```bash -$ helm upgrade -i computegcpkubedbcom-network-editor appscode/computegcpkubedbcom-network-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i computegcpkubedbcom-network-editor appscode/computegcpkubedbcom-network-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Network Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `computegcpkubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i computegcpkubedbcom-network-editor appscode/computegcpkubedbcom-network-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=compute.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i computegcpkubedbcom-network-editor appscode/computegcpkubedbcom-network-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=compute.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i computegcpkubedbcom-network-editor appscode/computegcpkubedbcom-network-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i computegcpkubedbcom-network-editor appscode/computegcpkubedbcom-network-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/computegcpkubedbcom-networkpeering-editor/Chart.yaml b/charts/computegcpkubedbcom-networkpeering-editor/Chart.yaml index 3cef4fd718..77879a782a 100644 --- a/charts/computegcpkubedbcom-networkpeering-editor/Chart.yaml +++ b/charts/computegcpkubedbcom-networkpeering-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"compute.gcp.kubedb.com","version":"v1alpha1","resource":"networkpeerings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: NetworkPeering Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: computegcpkubedbcom-networkpeering-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/computegcpkubedbcom-networkpeering-editor/README.md b/charts/computegcpkubedbcom-networkpeering-editor/README.md index 1b20e67aed..5bbe138261 100644 --- a/charts/computegcpkubedbcom-networkpeering-editor/README.md +++ b/charts/computegcpkubedbcom-networkpeering-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/computegcpkubedbcom-networkpeering-editor --version=v0.38.0 -$ helm upgrade -i computegcpkubedbcom-networkpeering-editor appscode/computegcpkubedbcom-networkpeering-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/computegcpkubedbcom-networkpeering-editor --version=v0.39.0 +$ helm upgrade -i computegcpkubedbcom-networkpeering-editor appscode/computegcpkubedbcom-networkpeering-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a NetworkPeering Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `computegcpkubedbcom-networkpeering-editor`: ```bash -$ helm upgrade -i computegcpkubedbcom-networkpeering-editor appscode/computegcpkubedbcom-networkpeering-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i computegcpkubedbcom-networkpeering-editor appscode/computegcpkubedbcom-networkpeering-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a NetworkPeering Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `computegcpkubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i computegcpkubedbcom-networkpeering-editor appscode/computegcpkubedbcom-networkpeering-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=compute.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i computegcpkubedbcom-networkpeering-editor appscode/computegcpkubedbcom-networkpeering-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=compute.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i computegcpkubedbcom-networkpeering-editor appscode/computegcpkubedbcom-networkpeering-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i computegcpkubedbcom-networkpeering-editor appscode/computegcpkubedbcom-networkpeering-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/configgatekeepersh-config-editor/Chart.yaml b/charts/configgatekeepersh-config-editor/Chart.yaml index b1dbc8c897..fea6af1118 100644 --- a/charts/configgatekeepersh-config-editor/Chart.yaml +++ b/charts/configgatekeepersh-config-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"config.gatekeeper.sh","version":"v1alpha1","resource":"configs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Config Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: configgatekeepersh-config-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/configgatekeepersh-config-editor/README.md b/charts/configgatekeepersh-config-editor/README.md index 3ae6cb6b5e..d5f7eff5e4 100644 --- a/charts/configgatekeepersh-config-editor/README.md +++ b/charts/configgatekeepersh-config-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/configgatekeepersh-config-editor --version=v0.38.0 -$ helm upgrade -i configgatekeepersh-config-editor appscode/configgatekeepersh-config-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/configgatekeepersh-config-editor --version=v0.39.0 +$ helm upgrade -i configgatekeepersh-config-editor appscode/configgatekeepersh-config-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Config Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `configgatekeepersh-config-editor`: ```bash -$ helm upgrade -i configgatekeepersh-config-editor appscode/configgatekeepersh-config-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i configgatekeepersh-config-editor appscode/configgatekeepersh-config-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Config Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `configgatekeepersh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i configgatekeepersh-config-editor appscode/configgatekeepersh-config-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=config.gatekeeper.sh/v1alpha1 +$ helm upgrade -i configgatekeepersh-config-editor appscode/configgatekeepersh-config-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=config.gatekeeper.sh/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i configgatekeepersh-config-editor appscode/configgatekeepersh-config-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i configgatekeepersh-config-editor appscode/configgatekeepersh-config-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/configgatewayenvoyproxyio-envoyproxy-editor/Chart.yaml b/charts/configgatewayenvoyproxyio-envoyproxy-editor/Chart.yaml index 5ebfbf456f..94f45f3998 100644 --- a/charts/configgatewayenvoyproxyio-envoyproxy-editor/Chart.yaml +++ b/charts/configgatewayenvoyproxyio-envoyproxy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"config.gateway.envoyproxy.io","version":"v1alpha1","resource":"envoyproxies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: EnvoyProxy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: configgatewayenvoyproxyio-envoyproxy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/configgatewayenvoyproxyio-envoyproxy-editor/README.md b/charts/configgatewayenvoyproxyio-envoyproxy-editor/README.md index 253ed97dbd..50315b13fb 100644 --- a/charts/configgatewayenvoyproxyio-envoyproxy-editor/README.md +++ b/charts/configgatewayenvoyproxyio-envoyproxy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/configgatewayenvoyproxyio-envoyproxy-editor --version=v0.38.0 -$ helm upgrade -i configgatewayenvoyproxyio-envoyproxy-editor appscode/configgatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/configgatewayenvoyproxyio-envoyproxy-editor --version=v0.39.0 +$ helm upgrade -i configgatewayenvoyproxyio-envoyproxy-editor appscode/configgatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EnvoyProxy Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `configgatewayenvoyproxyio-envoyproxy-editor`: ```bash -$ helm upgrade -i configgatewayenvoyproxyio-envoyproxy-editor appscode/configgatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i configgatewayenvoyproxyio-envoyproxy-editor appscode/configgatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a EnvoyProxy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `configgatewayenvoy Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i configgatewayenvoyproxyio-envoyproxy-editor appscode/configgatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=config.gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i configgatewayenvoyproxyio-envoyproxy-editor appscode/configgatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=config.gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i configgatewayenvoyproxyio-envoyproxy-editor appscode/configgatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i configgatewayenvoyproxyio-envoyproxy-editor appscode/configgatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor/Chart.yaml b/charts/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor/Chart.yaml index ebc8a61dc7..0b58601cc2 100644 --- a/charts/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor/Chart.yaml +++ b/charts/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"config.gateway.open-cluster-management.io","version":"v1alpha1","resource":"clustergatewayconfigurations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterGatewayConfiguration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: configgatewayopenclustermanagementio-clustergatewayconfiguration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor/README.md b/charts/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor/README.md index b6b38e28ce..444dbc5d1e 100644 --- a/charts/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor/README.md +++ b/charts/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor --version=v0.38.0 -$ helm upgrade -i configgatewayopenclustermanagementio-clustergatewayconfiguration-editor appscode/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor --version=v0.39.0 +$ helm upgrade -i configgatewayopenclustermanagementio-clustergatewayconfiguration-editor appscode/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterGatewayConfiguration Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `configgatewayopenclustermanagementio-clustergatewayconfiguration-editor`: ```bash -$ helm upgrade -i configgatewayopenclustermanagementio-clustergatewayconfiguration-editor appscode/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i configgatewayopenclustermanagementio-clustergatewayconfiguration-editor appscode/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterGatewayConfiguration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `configgatewayopenc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i configgatewayopenclustermanagementio-clustergatewayconfiguration-editor appscode/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=config.gateway.open-cluster-management.io/v1alpha1 +$ helm upgrade -i configgatewayopenclustermanagementio-clustergatewayconfiguration-editor appscode/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=config.gateway.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i configgatewayopenclustermanagementio-clustergatewayconfiguration-editor appscode/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i configgatewayopenclustermanagementio-clustergatewayconfiguration-editor appscode/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/configvirtualsecretsdev-secretmetadata-editor/Chart.yaml b/charts/configvirtualsecretsdev-secretmetadata-editor/Chart.yaml index 2371c88df0..5112e6bf54 100644 --- a/charts/configvirtualsecretsdev-secretmetadata-editor/Chart.yaml +++ b/charts/configvirtualsecretsdev-secretmetadata-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"config.virtual-secrets.dev","version":"v1alpha1","resource":"secretmetadatas"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SecretMetadata Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: configvirtualsecretsdev-secretmetadata-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/configvirtualsecretsdev-secretmetadata-editor/README.md b/charts/configvirtualsecretsdev-secretmetadata-editor/README.md index 5474d10c48..a43c681b55 100644 --- a/charts/configvirtualsecretsdev-secretmetadata-editor/README.md +++ b/charts/configvirtualsecretsdev-secretmetadata-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/configvirtualsecretsdev-secretmetadata-editor --version=v0.38.0 -$ helm upgrade -i configvirtualsecretsdev-secretmetadata-editor appscode/configvirtualsecretsdev-secretmetadata-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/configvirtualsecretsdev-secretmetadata-editor --version=v0.39.0 +$ helm upgrade -i configvirtualsecretsdev-secretmetadata-editor appscode/configvirtualsecretsdev-secretmetadata-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecretMetadata Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `configvirtualsecretsdev-secretmetadata-editor`: ```bash -$ helm upgrade -i configvirtualsecretsdev-secretmetadata-editor appscode/configvirtualsecretsdev-secretmetadata-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i configvirtualsecretsdev-secretmetadata-editor appscode/configvirtualsecretsdev-secretmetadata-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SecretMetadata Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `configvirtualsecre Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i configvirtualsecretsdev-secretmetadata-editor appscode/configvirtualsecretsdev-secretmetadata-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=config.virtual-secrets.dev/v1alpha1 +$ helm upgrade -i configvirtualsecretsdev-secretmetadata-editor appscode/configvirtualsecretsdev-secretmetadata-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=config.virtual-secrets.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i configvirtualsecretsdev-secretmetadata-editor appscode/configvirtualsecretsdev-secretmetadata-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i configvirtualsecretsdev-secretmetadata-editor appscode/configvirtualsecretsdev-secretmetadata-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/configvirtualsecretsdev-secretstore-editor/Chart.yaml b/charts/configvirtualsecretsdev-secretstore-editor/Chart.yaml index 7909bc70a5..631797bb94 100644 --- a/charts/configvirtualsecretsdev-secretstore-editor/Chart.yaml +++ b/charts/configvirtualsecretsdev-secretstore-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"config.virtual-secrets.dev","version":"v1alpha1","resource":"secretstores"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SecretStore Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: configvirtualsecretsdev-secretstore-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/configvirtualsecretsdev-secretstore-editor/README.md b/charts/configvirtualsecretsdev-secretstore-editor/README.md index 1c6df5b663..14fa4b8429 100644 --- a/charts/configvirtualsecretsdev-secretstore-editor/README.md +++ b/charts/configvirtualsecretsdev-secretstore-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/configvirtualsecretsdev-secretstore-editor --version=v0.38.0 -$ helm upgrade -i configvirtualsecretsdev-secretstore-editor appscode/configvirtualsecretsdev-secretstore-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/configvirtualsecretsdev-secretstore-editor --version=v0.39.0 +$ helm upgrade -i configvirtualsecretsdev-secretstore-editor appscode/configvirtualsecretsdev-secretstore-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecretStore Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `configvirtualsecretsdev-secretstore-editor`: ```bash -$ helm upgrade -i configvirtualsecretsdev-secretstore-editor appscode/configvirtualsecretsdev-secretstore-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i configvirtualsecretsdev-secretstore-editor appscode/configvirtualsecretsdev-secretstore-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SecretStore Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `configvirtualsecre Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i configvirtualsecretsdev-secretstore-editor appscode/configvirtualsecretsdev-secretstore-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=config.virtual-secrets.dev/v1alpha1 +$ helm upgrade -i configvirtualsecretsdev-secretstore-editor appscode/configvirtualsecretsdev-secretstore-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=config.virtual-secrets.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i configvirtualsecretsdev-secretstore-editor appscode/configvirtualsecretsdev-secretstore-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i configvirtualsecretsdev-secretstore-editor appscode/configvirtualsecretsdev-secretstore-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor/Chart.yaml b/charts/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor/Chart.yaml index 2f7625a1ac..47c8bd2dfe 100644 --- a/charts/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor/Chart.yaml +++ b/charts/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"controlplane.cluster.x-k8s.io","version":"v1beta2","resource":"awsmanagedcontrolplanes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AWSManagedControlPlane Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: controlplaneclusterxk8sio-awsmanagedcontrolplane-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor/README.md b/charts/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor/README.md index e088b5c890..35bbf23c34 100644 --- a/charts/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor/README.md +++ b/charts/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor --version=v0.38.0 -$ helm upgrade -i controlplaneclusterxk8sio-awsmanagedcontrolplane-editor appscode/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor --version=v0.39.0 +$ helm upgrade -i controlplaneclusterxk8sio-awsmanagedcontrolplane-editor appscode/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSManagedControlPlane Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `controlplaneclusterxk8sio-awsmanagedcontrolplane-editor`: ```bash -$ helm upgrade -i controlplaneclusterxk8sio-awsmanagedcontrolplane-editor appscode/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i controlplaneclusterxk8sio-awsmanagedcontrolplane-editor appscode/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AWSManagedControlPlane Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `controlplanecluste Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i controlplaneclusterxk8sio-awsmanagedcontrolplane-editor appscode/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=controlplane.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i controlplaneclusterxk8sio-awsmanagedcontrolplane-editor appscode/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=controlplane.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i controlplaneclusterxk8sio-awsmanagedcontrolplane-editor appscode/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i controlplaneclusterxk8sio-awsmanagedcontrolplane-editor appscode/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/controlplaneclusterxk8sio-rosacontrolplane-editor/Chart.yaml b/charts/controlplaneclusterxk8sio-rosacontrolplane-editor/Chart.yaml index 7a9ab1f47a..bd2cc6c04a 100644 --- a/charts/controlplaneclusterxk8sio-rosacontrolplane-editor/Chart.yaml +++ b/charts/controlplaneclusterxk8sio-rosacontrolplane-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"controlplane.cluster.x-k8s.io","version":"v1beta2","resource":"rosacontrolplanes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ROSAControlPlane Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: controlplaneclusterxk8sio-rosacontrolplane-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/controlplaneclusterxk8sio-rosacontrolplane-editor/README.md b/charts/controlplaneclusterxk8sio-rosacontrolplane-editor/README.md index c6d95e8f56..f2b157f043 100644 --- a/charts/controlplaneclusterxk8sio-rosacontrolplane-editor/README.md +++ b/charts/controlplaneclusterxk8sio-rosacontrolplane-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/controlplaneclusterxk8sio-rosacontrolplane-editor --version=v0.38.0 -$ helm upgrade -i controlplaneclusterxk8sio-rosacontrolplane-editor appscode/controlplaneclusterxk8sio-rosacontrolplane-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/controlplaneclusterxk8sio-rosacontrolplane-editor --version=v0.39.0 +$ helm upgrade -i controlplaneclusterxk8sio-rosacontrolplane-editor appscode/controlplaneclusterxk8sio-rosacontrolplane-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ROSAControlPlane Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `controlplaneclusterxk8sio-rosacontrolplane-editor`: ```bash -$ helm upgrade -i controlplaneclusterxk8sio-rosacontrolplane-editor appscode/controlplaneclusterxk8sio-rosacontrolplane-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i controlplaneclusterxk8sio-rosacontrolplane-editor appscode/controlplaneclusterxk8sio-rosacontrolplane-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ROSAControlPlane Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `controlplanecluste Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i controlplaneclusterxk8sio-rosacontrolplane-editor appscode/controlplaneclusterxk8sio-rosacontrolplane-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=controlplane.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i controlplaneclusterxk8sio-rosacontrolplane-editor appscode/controlplaneclusterxk8sio-rosacontrolplane-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=controlplane.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i controlplaneclusterxk8sio-rosacontrolplane-editor appscode/controlplaneclusterxk8sio-rosacontrolplane-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i controlplaneclusterxk8sio-rosacontrolplane-editor appscode/controlplaneclusterxk8sio-rosacontrolplane-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/coordinationk8sio-lease-editor/Chart.yaml b/charts/coordinationk8sio-lease-editor/Chart.yaml index 09e4a313dd..443012fd54 100644 --- a/charts/coordinationk8sio-lease-editor/Chart.yaml +++ b/charts/coordinationk8sio-lease-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"coordination.k8s.io","version":"v1","resource":"leases"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Lease Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: coordinationk8sio-lease-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/coordinationk8sio-lease-editor/README.md b/charts/coordinationk8sio-lease-editor/README.md index 7fb9041d80..5a1f994025 100644 --- a/charts/coordinationk8sio-lease-editor/README.md +++ b/charts/coordinationk8sio-lease-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/coordinationk8sio-lease-editor --version=v0.38.0 -$ helm upgrade -i coordinationk8sio-lease-editor appscode/coordinationk8sio-lease-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/coordinationk8sio-lease-editor --version=v0.39.0 +$ helm upgrade -i coordinationk8sio-lease-editor appscode/coordinationk8sio-lease-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Lease Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `coordinationk8sio-lease-editor`: ```bash -$ helm upgrade -i coordinationk8sio-lease-editor appscode/coordinationk8sio-lease-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i coordinationk8sio-lease-editor appscode/coordinationk8sio-lease-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Lease Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `coordinationk8sio- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i coordinationk8sio-lease-editor appscode/coordinationk8sio-lease-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=coordination.k8s.io/v1 +$ helm upgrade -i coordinationk8sio-lease-editor appscode/coordinationk8sio-lease-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=coordination.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i coordinationk8sio-lease-editor appscode/coordinationk8sio-lease-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i coordinationk8sio-lease-editor appscode/coordinationk8sio-lease-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/core-binding-editor/Chart.yaml b/charts/core-binding-editor/Chart.yaml index 6dda8511aa..bd25a3b433 100644 --- a/charts/core-binding-editor/Chart.yaml +++ b/charts/core-binding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"bindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Binding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-binding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/core-binding-editor/README.md b/charts/core-binding-editor/README.md index 4ba08c7371..ac43fbb9d5 100644 --- a/charts/core-binding-editor/README.md +++ b/charts/core-binding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-binding-editor --version=v0.38.0 -$ helm upgrade -i core-binding-editor appscode/core-binding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/core-binding-editor --version=v0.39.0 +$ helm upgrade -i core-binding-editor appscode/core-binding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Binding Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `core-binding-editor`: ```bash -$ helm upgrade -i core-binding-editor appscode/core-binding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i core-binding-editor appscode/core-binding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Binding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-binding-edito Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-binding-editor appscode/core-binding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=v1 +$ helm upgrade -i core-binding-editor appscode/core-binding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-binding-editor appscode/core-binding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i core-binding-editor appscode/core-binding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/core-componentstatus-editor/Chart.yaml b/charts/core-componentstatus-editor/Chart.yaml index d368723e99..b117f09070 100644 --- a/charts/core-componentstatus-editor/Chart.yaml +++ b/charts/core-componentstatus-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"componentstatuses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ComponentStatus Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-componentstatus-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/core-componentstatus-editor/README.md b/charts/core-componentstatus-editor/README.md index b860d213c2..9a1cad6cd5 100644 --- a/charts/core-componentstatus-editor/README.md +++ b/charts/core-componentstatus-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-componentstatus-editor --version=v0.38.0 -$ helm upgrade -i core-componentstatus-editor appscode/core-componentstatus-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/core-componentstatus-editor --version=v0.39.0 +$ helm upgrade -i core-componentstatus-editor appscode/core-componentstatus-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ComponentStatus Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `core-componentstatus-editor`: ```bash -$ helm upgrade -i core-componentstatus-editor appscode/core-componentstatus-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i core-componentstatus-editor appscode/core-componentstatus-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ComponentStatus Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-componentstat Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-componentstatus-editor appscode/core-componentstatus-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=v1 +$ helm upgrade -i core-componentstatus-editor appscode/core-componentstatus-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-componentstatus-editor appscode/core-componentstatus-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i core-componentstatus-editor appscode/core-componentstatus-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/core-configmap-editor/Chart.yaml b/charts/core-configmap-editor/Chart.yaml index 4476c9d6db..5a23116963 100644 --- a/charts/core-configmap-editor/Chart.yaml +++ b/charts/core-configmap-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"configmaps"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ConfigMap Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-configmap-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/core-configmap-editor/README.md b/charts/core-configmap-editor/README.md index 7f75db5785..7811bedce1 100644 --- a/charts/core-configmap-editor/README.md +++ b/charts/core-configmap-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-configmap-editor --version=v0.38.0 -$ helm upgrade -i core-configmap-editor appscode/core-configmap-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/core-configmap-editor --version=v0.39.0 +$ helm upgrade -i core-configmap-editor appscode/core-configmap-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ConfigMap Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `core-configmap-editor`: ```bash -$ helm upgrade -i core-configmap-editor appscode/core-configmap-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i core-configmap-editor appscode/core-configmap-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ConfigMap Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-configmap-edi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-configmap-editor appscode/core-configmap-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=v1 +$ helm upgrade -i core-configmap-editor appscode/core-configmap-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-configmap-editor appscode/core-configmap-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i core-configmap-editor appscode/core-configmap-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/core-endpoints-editor/Chart.yaml b/charts/core-endpoints-editor/Chart.yaml index 5745c43484..1c24538d90 100644 --- a/charts/core-endpoints-editor/Chart.yaml +++ b/charts/core-endpoints-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"endpoints"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Endpoints Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-endpoints-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/core-endpoints-editor/README.md b/charts/core-endpoints-editor/README.md index 719c94b5cf..563db47c33 100644 --- a/charts/core-endpoints-editor/README.md +++ b/charts/core-endpoints-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-endpoints-editor --version=v0.38.0 -$ helm upgrade -i core-endpoints-editor appscode/core-endpoints-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/core-endpoints-editor --version=v0.39.0 +$ helm upgrade -i core-endpoints-editor appscode/core-endpoints-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Endpoints Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `core-endpoints-editor`: ```bash -$ helm upgrade -i core-endpoints-editor appscode/core-endpoints-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i core-endpoints-editor appscode/core-endpoints-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Endpoints Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-endpoints-edi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-endpoints-editor appscode/core-endpoints-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=v1 +$ helm upgrade -i core-endpoints-editor appscode/core-endpoints-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-endpoints-editor appscode/core-endpoints-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i core-endpoints-editor appscode/core-endpoints-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/core-ephemeralcontainers-editor/Chart.yaml b/charts/core-ephemeralcontainers-editor/Chart.yaml index cb37ea19f1..2af42e37a8 100644 --- a/charts/core-ephemeralcontainers-editor/Chart.yaml +++ b/charts/core-ephemeralcontainers-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"ephemeralcontainers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: EphemeralContainers Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-ephemeralcontainers-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/core-ephemeralcontainers-editor/README.md b/charts/core-ephemeralcontainers-editor/README.md index 1e072b4568..6df7102117 100644 --- a/charts/core-ephemeralcontainers-editor/README.md +++ b/charts/core-ephemeralcontainers-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-ephemeralcontainers-editor --version=v0.38.0 -$ helm upgrade -i core-ephemeralcontainers-editor appscode/core-ephemeralcontainers-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/core-ephemeralcontainers-editor --version=v0.39.0 +$ helm upgrade -i core-ephemeralcontainers-editor appscode/core-ephemeralcontainers-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EphemeralContainers Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `core-ephemeralcontainers-editor`: ```bash -$ helm upgrade -i core-ephemeralcontainers-editor appscode/core-ephemeralcontainers-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i core-ephemeralcontainers-editor appscode/core-ephemeralcontainers-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a EphemeralContainers Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-ephemeralcont Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-ephemeralcontainers-editor appscode/core-ephemeralcontainers-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=v1 +$ helm upgrade -i core-ephemeralcontainers-editor appscode/core-ephemeralcontainers-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-ephemeralcontainers-editor appscode/core-ephemeralcontainers-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i core-ephemeralcontainers-editor appscode/core-ephemeralcontainers-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/core-event-editor/Chart.yaml b/charts/core-event-editor/Chart.yaml index db9c8f2ea9..0b591fb9b6 100644 --- a/charts/core-event-editor/Chart.yaml +++ b/charts/core-event-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"events"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Event Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-event-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/core-event-editor/README.md b/charts/core-event-editor/README.md index 9517fea533..24da54cdc1 100644 --- a/charts/core-event-editor/README.md +++ b/charts/core-event-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-event-editor --version=v0.38.0 -$ helm upgrade -i core-event-editor appscode/core-event-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/core-event-editor --version=v0.39.0 +$ helm upgrade -i core-event-editor appscode/core-event-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Event Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `core-event-editor`: ```bash -$ helm upgrade -i core-event-editor appscode/core-event-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i core-event-editor appscode/core-event-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Event Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-event-editor` Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-event-editor appscode/core-event-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=v1 +$ helm upgrade -i core-event-editor appscode/core-event-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-event-editor appscode/core-event-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i core-event-editor appscode/core-event-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/core-limitrange-editor/Chart.yaml b/charts/core-limitrange-editor/Chart.yaml index 467db4e144..612215ca98 100644 --- a/charts/core-limitrange-editor/Chart.yaml +++ b/charts/core-limitrange-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"limitranges"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: LimitRange Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-limitrange-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/core-limitrange-editor/README.md b/charts/core-limitrange-editor/README.md index e66a66e8b1..d2bf0460f2 100644 --- a/charts/core-limitrange-editor/README.md +++ b/charts/core-limitrange-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-limitrange-editor --version=v0.38.0 -$ helm upgrade -i core-limitrange-editor appscode/core-limitrange-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/core-limitrange-editor --version=v0.39.0 +$ helm upgrade -i core-limitrange-editor appscode/core-limitrange-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a LimitRange Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `core-limitrange-editor`: ```bash -$ helm upgrade -i core-limitrange-editor appscode/core-limitrange-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i core-limitrange-editor appscode/core-limitrange-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a LimitRange Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-limitrange-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-limitrange-editor appscode/core-limitrange-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=v1 +$ helm upgrade -i core-limitrange-editor appscode/core-limitrange-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-limitrange-editor appscode/core-limitrange-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i core-limitrange-editor appscode/core-limitrange-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/core-namespace-editor/Chart.yaml b/charts/core-namespace-editor/Chart.yaml index be290aeecb..747759bd69 100644 --- a/charts/core-namespace-editor/Chart.yaml +++ b/charts/core-namespace-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"namespaces"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Namespace Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-namespace-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/core-namespace-editor/README.md b/charts/core-namespace-editor/README.md index 3156ec8fb7..a4a6280b26 100644 --- a/charts/core-namespace-editor/README.md +++ b/charts/core-namespace-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-namespace-editor --version=v0.38.0 -$ helm upgrade -i core-namespace-editor appscode/core-namespace-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/core-namespace-editor --version=v0.39.0 +$ helm upgrade -i core-namespace-editor appscode/core-namespace-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Namespace Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `core-namespace-editor`: ```bash -$ helm upgrade -i core-namespace-editor appscode/core-namespace-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i core-namespace-editor appscode/core-namespace-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Namespace Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-namespace-edi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-namespace-editor appscode/core-namespace-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=v1 +$ helm upgrade -i core-namespace-editor appscode/core-namespace-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-namespace-editor appscode/core-namespace-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i core-namespace-editor appscode/core-namespace-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/core-node-editor/Chart.yaml b/charts/core-node-editor/Chart.yaml index acc62c527f..778dc48943 100644 --- a/charts/core-node-editor/Chart.yaml +++ b/charts/core-node-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"nodes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Node Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-node-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/core-node-editor/README.md b/charts/core-node-editor/README.md index cde713ff40..4689296a81 100644 --- a/charts/core-node-editor/README.md +++ b/charts/core-node-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-node-editor --version=v0.38.0 -$ helm upgrade -i core-node-editor appscode/core-node-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/core-node-editor --version=v0.39.0 +$ helm upgrade -i core-node-editor appscode/core-node-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Node Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `core-node-editor`: ```bash -$ helm upgrade -i core-node-editor appscode/core-node-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i core-node-editor appscode/core-node-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Node Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-node-editor` Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-node-editor appscode/core-node-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=v1 +$ helm upgrade -i core-node-editor appscode/core-node-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-node-editor appscode/core-node-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i core-node-editor appscode/core-node-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/core-persistentvolume-editor/Chart.yaml b/charts/core-persistentvolume-editor/Chart.yaml index 66ece4c5b6..05318ecb07 100644 --- a/charts/core-persistentvolume-editor/Chart.yaml +++ b/charts/core-persistentvolume-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"persistentvolumes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PersistentVolume Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-persistentvolume-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/core-persistentvolume-editor/README.md b/charts/core-persistentvolume-editor/README.md index 9bc2ae516e..319ea401e1 100644 --- a/charts/core-persistentvolume-editor/README.md +++ b/charts/core-persistentvolume-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-persistentvolume-editor --version=v0.38.0 -$ helm upgrade -i core-persistentvolume-editor appscode/core-persistentvolume-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/core-persistentvolume-editor --version=v0.39.0 +$ helm upgrade -i core-persistentvolume-editor appscode/core-persistentvolume-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PersistentVolume Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `core-persistentvolume-editor`: ```bash -$ helm upgrade -i core-persistentvolume-editor appscode/core-persistentvolume-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i core-persistentvolume-editor appscode/core-persistentvolume-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PersistentVolume Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-persistentvol Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-persistentvolume-editor appscode/core-persistentvolume-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=v1 +$ helm upgrade -i core-persistentvolume-editor appscode/core-persistentvolume-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-persistentvolume-editor appscode/core-persistentvolume-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i core-persistentvolume-editor appscode/core-persistentvolume-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/core-persistentvolumeclaim-editor/Chart.yaml b/charts/core-persistentvolumeclaim-editor/Chart.yaml index 0f79a323be..a25af59b4c 100644 --- a/charts/core-persistentvolumeclaim-editor/Chart.yaml +++ b/charts/core-persistentvolumeclaim-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"persistentvolumeclaims"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PersistentVolumeClaim Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-persistentvolumeclaim-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/core-persistentvolumeclaim-editor/README.md b/charts/core-persistentvolumeclaim-editor/README.md index fe5ca49f40..4398f04650 100644 --- a/charts/core-persistentvolumeclaim-editor/README.md +++ b/charts/core-persistentvolumeclaim-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-persistentvolumeclaim-editor --version=v0.38.0 -$ helm upgrade -i core-persistentvolumeclaim-editor appscode/core-persistentvolumeclaim-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/core-persistentvolumeclaim-editor --version=v0.39.0 +$ helm upgrade -i core-persistentvolumeclaim-editor appscode/core-persistentvolumeclaim-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PersistentVolumeClaim Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `core-persistentvolumeclaim-editor`: ```bash -$ helm upgrade -i core-persistentvolumeclaim-editor appscode/core-persistentvolumeclaim-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i core-persistentvolumeclaim-editor appscode/core-persistentvolumeclaim-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PersistentVolumeClaim Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-persistentvol Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-persistentvolumeclaim-editor appscode/core-persistentvolumeclaim-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=v1 +$ helm upgrade -i core-persistentvolumeclaim-editor appscode/core-persistentvolumeclaim-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-persistentvolumeclaim-editor appscode/core-persistentvolumeclaim-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i core-persistentvolumeclaim-editor appscode/core-persistentvolumeclaim-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/core-pod-editor/Chart.yaml b/charts/core-pod-editor/Chart.yaml index e7a2d63b9b..8ebef49164 100644 --- a/charts/core-pod-editor/Chart.yaml +++ b/charts/core-pod-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"pods"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Pod Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-pod-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/core-pod-editor/README.md b/charts/core-pod-editor/README.md index e9a60d1cb5..b328e4eecf 100644 --- a/charts/core-pod-editor/README.md +++ b/charts/core-pod-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-pod-editor --version=v0.38.0 -$ helm upgrade -i core-pod-editor appscode/core-pod-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/core-pod-editor --version=v0.39.0 +$ helm upgrade -i core-pod-editor appscode/core-pod-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Pod Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `core-pod-editor`: ```bash -$ helm upgrade -i core-pod-editor appscode/core-pod-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i core-pod-editor appscode/core-pod-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Pod Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-pod-editor` c Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-pod-editor appscode/core-pod-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=v1 +$ helm upgrade -i core-pod-editor appscode/core-pod-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-pod-editor appscode/core-pod-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i core-pod-editor appscode/core-pod-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/core-podstatusresult-editor/Chart.yaml b/charts/core-podstatusresult-editor/Chart.yaml index 9f76962937..5b44159f7c 100644 --- a/charts/core-podstatusresult-editor/Chart.yaml +++ b/charts/core-podstatusresult-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"podstatusresults"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PodStatusResult Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-podstatusresult-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/core-podstatusresult-editor/README.md b/charts/core-podstatusresult-editor/README.md index e49d5480ea..ab72993e16 100644 --- a/charts/core-podstatusresult-editor/README.md +++ b/charts/core-podstatusresult-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-podstatusresult-editor --version=v0.38.0 -$ helm upgrade -i core-podstatusresult-editor appscode/core-podstatusresult-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/core-podstatusresult-editor --version=v0.39.0 +$ helm upgrade -i core-podstatusresult-editor appscode/core-podstatusresult-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PodStatusResult Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `core-podstatusresult-editor`: ```bash -$ helm upgrade -i core-podstatusresult-editor appscode/core-podstatusresult-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i core-podstatusresult-editor appscode/core-podstatusresult-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PodStatusResult Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-podstatusresu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-podstatusresult-editor appscode/core-podstatusresult-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=v1 +$ helm upgrade -i core-podstatusresult-editor appscode/core-podstatusresult-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-podstatusresult-editor appscode/core-podstatusresult-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i core-podstatusresult-editor appscode/core-podstatusresult-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/core-rangeallocation-editor/Chart.yaml b/charts/core-rangeallocation-editor/Chart.yaml index de6f8576af..a7e7da4a08 100644 --- a/charts/core-rangeallocation-editor/Chart.yaml +++ b/charts/core-rangeallocation-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"rangeallocations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RangeAllocation Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-rangeallocation-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/core-rangeallocation-editor/README.md b/charts/core-rangeallocation-editor/README.md index eb04dcab25..d4b9999c00 100644 --- a/charts/core-rangeallocation-editor/README.md +++ b/charts/core-rangeallocation-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-rangeallocation-editor --version=v0.38.0 -$ helm upgrade -i core-rangeallocation-editor appscode/core-rangeallocation-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/core-rangeallocation-editor --version=v0.39.0 +$ helm upgrade -i core-rangeallocation-editor appscode/core-rangeallocation-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RangeAllocation Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `core-rangeallocation-editor`: ```bash -$ helm upgrade -i core-rangeallocation-editor appscode/core-rangeallocation-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i core-rangeallocation-editor appscode/core-rangeallocation-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RangeAllocation Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-rangeallocati Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-rangeallocation-editor appscode/core-rangeallocation-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=v1 +$ helm upgrade -i core-rangeallocation-editor appscode/core-rangeallocation-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-rangeallocation-editor appscode/core-rangeallocation-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i core-rangeallocation-editor appscode/core-rangeallocation-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/core-replicationcontroller-editor/Chart.yaml b/charts/core-replicationcontroller-editor/Chart.yaml index 8a81fbb33b..f933d2464f 100644 --- a/charts/core-replicationcontroller-editor/Chart.yaml +++ b/charts/core-replicationcontroller-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"replicationcontrollers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ReplicationController Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-replicationcontroller-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/core-replicationcontroller-editor/README.md b/charts/core-replicationcontroller-editor/README.md index 1b5dd08fdc..62d7a64c8c 100644 --- a/charts/core-replicationcontroller-editor/README.md +++ b/charts/core-replicationcontroller-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-replicationcontroller-editor --version=v0.38.0 -$ helm upgrade -i core-replicationcontroller-editor appscode/core-replicationcontroller-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/core-replicationcontroller-editor --version=v0.39.0 +$ helm upgrade -i core-replicationcontroller-editor appscode/core-replicationcontroller-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ReplicationController Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `core-replicationcontroller-editor`: ```bash -$ helm upgrade -i core-replicationcontroller-editor appscode/core-replicationcontroller-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i core-replicationcontroller-editor appscode/core-replicationcontroller-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ReplicationController Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-replicationco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-replicationcontroller-editor appscode/core-replicationcontroller-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=v1 +$ helm upgrade -i core-replicationcontroller-editor appscode/core-replicationcontroller-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-replicationcontroller-editor appscode/core-replicationcontroller-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i core-replicationcontroller-editor appscode/core-replicationcontroller-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/core-resourcequota-editor/Chart.yaml b/charts/core-resourcequota-editor/Chart.yaml index 53d07dfd63..b6415b8180 100644 --- a/charts/core-resourcequota-editor/Chart.yaml +++ b/charts/core-resourcequota-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"resourcequotas"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ResourceQuota Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-resourcequota-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/core-resourcequota-editor/README.md b/charts/core-resourcequota-editor/README.md index 3e1d104073..4d2a473363 100644 --- a/charts/core-resourcequota-editor/README.md +++ b/charts/core-resourcequota-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-resourcequota-editor --version=v0.38.0 -$ helm upgrade -i core-resourcequota-editor appscode/core-resourcequota-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/core-resourcequota-editor --version=v0.39.0 +$ helm upgrade -i core-resourcequota-editor appscode/core-resourcequota-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceQuota Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `core-resourcequota-editor`: ```bash -$ helm upgrade -i core-resourcequota-editor appscode/core-resourcequota-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i core-resourcequota-editor appscode/core-resourcequota-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ResourceQuota Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-resourcequota Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-resourcequota-editor appscode/core-resourcequota-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=v1 +$ helm upgrade -i core-resourcequota-editor appscode/core-resourcequota-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-resourcequota-editor appscode/core-resourcequota-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i core-resourcequota-editor appscode/core-resourcequota-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/core-secret-editor/Chart.yaml b/charts/core-secret-editor/Chart.yaml index d40bc8eaad..55ecc11662 100644 --- a/charts/core-secret-editor/Chart.yaml +++ b/charts/core-secret-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"secrets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Secret Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-secret-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/core-secret-editor/README.md b/charts/core-secret-editor/README.md index 89d01125ca..abd2552b64 100644 --- a/charts/core-secret-editor/README.md +++ b/charts/core-secret-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-secret-editor --version=v0.38.0 -$ helm upgrade -i core-secret-editor appscode/core-secret-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/core-secret-editor --version=v0.39.0 +$ helm upgrade -i core-secret-editor appscode/core-secret-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Secret Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `core-secret-editor`: ```bash -$ helm upgrade -i core-secret-editor appscode/core-secret-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i core-secret-editor appscode/core-secret-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Secret Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-secret-editor Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-secret-editor appscode/core-secret-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=v1 +$ helm upgrade -i core-secret-editor appscode/core-secret-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-secret-editor appscode/core-secret-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i core-secret-editor appscode/core-secret-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/core-service-editor/Chart.yaml b/charts/core-service-editor/Chart.yaml index a45f20429c..2b5bf362e2 100644 --- a/charts/core-service-editor/Chart.yaml +++ b/charts/core-service-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"services"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Service Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-service-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/core-service-editor/README.md b/charts/core-service-editor/README.md index cc0ed72d56..48d110939a 100644 --- a/charts/core-service-editor/README.md +++ b/charts/core-service-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-service-editor --version=v0.38.0 -$ helm upgrade -i core-service-editor appscode/core-service-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/core-service-editor --version=v0.39.0 +$ helm upgrade -i core-service-editor appscode/core-service-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Service Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `core-service-editor`: ```bash -$ helm upgrade -i core-service-editor appscode/core-service-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i core-service-editor appscode/core-service-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Service Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-service-edito Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-service-editor appscode/core-service-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=v1 +$ helm upgrade -i core-service-editor appscode/core-service-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-service-editor appscode/core-service-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i core-service-editor appscode/core-service-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/core-serviceaccount-editor/Chart.yaml b/charts/core-serviceaccount-editor/Chart.yaml index 470918d25d..eacded0dab 100644 --- a/charts/core-serviceaccount-editor/Chart.yaml +++ b/charts/core-serviceaccount-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"serviceaccounts"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ServiceAccount Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-serviceaccount-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/core-serviceaccount-editor/README.md b/charts/core-serviceaccount-editor/README.md index d7be2cccef..88bee24937 100644 --- a/charts/core-serviceaccount-editor/README.md +++ b/charts/core-serviceaccount-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-serviceaccount-editor --version=v0.38.0 -$ helm upgrade -i core-serviceaccount-editor appscode/core-serviceaccount-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/core-serviceaccount-editor --version=v0.39.0 +$ helm upgrade -i core-serviceaccount-editor appscode/core-serviceaccount-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ServiceAccount Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `core-serviceaccount-editor`: ```bash -$ helm upgrade -i core-serviceaccount-editor appscode/core-serviceaccount-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i core-serviceaccount-editor appscode/core-serviceaccount-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ServiceAccount Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-serviceaccoun Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-serviceaccount-editor appscode/core-serviceaccount-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=v1 +$ helm upgrade -i core-serviceaccount-editor appscode/core-serviceaccount-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-serviceaccount-editor appscode/core-serviceaccount-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i core-serviceaccount-editor appscode/core-serviceaccount-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/corek8sappscodecom-genericresource-editor/Chart.yaml b/charts/corek8sappscodecom-genericresource-editor/Chart.yaml index dbc6cb2fde..71046eb467 100644 --- a/charts/corek8sappscodecom-genericresource-editor/Chart.yaml +++ b/charts/corek8sappscodecom-genericresource-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.k8s.appscode.com","version":"v1alpha1","resource":"genericresources"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GenericResource Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corek8sappscodecom-genericresource-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/corek8sappscodecom-genericresource-editor/README.md b/charts/corek8sappscodecom-genericresource-editor/README.md index 35c5096db8..18e8f49a8a 100644 --- a/charts/corek8sappscodecom-genericresource-editor/README.md +++ b/charts/corek8sappscodecom-genericresource-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corek8sappscodecom-genericresource-editor --version=v0.38.0 -$ helm upgrade -i corek8sappscodecom-genericresource-editor appscode/corek8sappscodecom-genericresource-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/corek8sappscodecom-genericresource-editor --version=v0.39.0 +$ helm upgrade -i corek8sappscodecom-genericresource-editor appscode/corek8sappscodecom-genericresource-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GenericResource Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `corek8sappscodecom-genericresource-editor`: ```bash -$ helm upgrade -i corek8sappscodecom-genericresource-editor appscode/corek8sappscodecom-genericresource-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i corek8sappscodecom-genericresource-editor appscode/corek8sappscodecom-genericresource-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GenericResource Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corek8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corek8sappscodecom-genericresource-editor appscode/corek8sappscodecom-genericresource-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 +$ helm upgrade -i corek8sappscodecom-genericresource-editor appscode/corek8sappscodecom-genericresource-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corek8sappscodecom-genericresource-editor appscode/corek8sappscodecom-genericresource-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i corek8sappscodecom-genericresource-editor appscode/corek8sappscodecom-genericresource-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/corek8sappscodecom-genericresourceservice-editor/Chart.yaml b/charts/corek8sappscodecom-genericresourceservice-editor/Chart.yaml index 4126430131..bb54dac255 100644 --- a/charts/corek8sappscodecom-genericresourceservice-editor/Chart.yaml +++ b/charts/corek8sappscodecom-genericresourceservice-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.k8s.appscode.com","version":"v1alpha1","resource":"genericresourceservices"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GenericResourceService Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corek8sappscodecom-genericresourceservice-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/corek8sappscodecom-genericresourceservice-editor/README.md b/charts/corek8sappscodecom-genericresourceservice-editor/README.md index 63c136b793..077161b689 100644 --- a/charts/corek8sappscodecom-genericresourceservice-editor/README.md +++ b/charts/corek8sappscodecom-genericresourceservice-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corek8sappscodecom-genericresourceservice-editor --version=v0.38.0 -$ helm upgrade -i corek8sappscodecom-genericresourceservice-editor appscode/corek8sappscodecom-genericresourceservice-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/corek8sappscodecom-genericresourceservice-editor --version=v0.39.0 +$ helm upgrade -i corek8sappscodecom-genericresourceservice-editor appscode/corek8sappscodecom-genericresourceservice-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GenericResourceService Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `corek8sappscodecom-genericresourceservice-editor`: ```bash -$ helm upgrade -i corek8sappscodecom-genericresourceservice-editor appscode/corek8sappscodecom-genericresourceservice-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i corek8sappscodecom-genericresourceservice-editor appscode/corek8sappscodecom-genericresourceservice-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GenericResourceService Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corek8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corek8sappscodecom-genericresourceservice-editor appscode/corek8sappscodecom-genericresourceservice-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 +$ helm upgrade -i corek8sappscodecom-genericresourceservice-editor appscode/corek8sappscodecom-genericresourceservice-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corek8sappscodecom-genericresourceservice-editor appscode/corek8sappscodecom-genericresourceservice-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i corek8sappscodecom-genericresourceservice-editor appscode/corek8sappscodecom-genericresourceservice-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/corek8sappscodecom-podview-editor/Chart.yaml b/charts/corek8sappscodecom-podview-editor/Chart.yaml index 0600745183..7f1e474a64 100644 --- a/charts/corek8sappscodecom-podview-editor/Chart.yaml +++ b/charts/corek8sappscodecom-podview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.k8s.appscode.com","version":"v1alpha1","resource":"podviews"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PodView Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corek8sappscodecom-podview-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/corek8sappscodecom-podview-editor/README.md b/charts/corek8sappscodecom-podview-editor/README.md index 33f3a412ee..2bfd2a574b 100644 --- a/charts/corek8sappscodecom-podview-editor/README.md +++ b/charts/corek8sappscodecom-podview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corek8sappscodecom-podview-editor --version=v0.38.0 -$ helm upgrade -i corek8sappscodecom-podview-editor appscode/corek8sappscodecom-podview-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/corek8sappscodecom-podview-editor --version=v0.39.0 +$ helm upgrade -i corek8sappscodecom-podview-editor appscode/corek8sappscodecom-podview-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PodView Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `corek8sappscodecom-podview-editor`: ```bash -$ helm upgrade -i corek8sappscodecom-podview-editor appscode/corek8sappscodecom-podview-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i corek8sappscodecom-podview-editor appscode/corek8sappscodecom-podview-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PodView Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corek8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corek8sappscodecom-podview-editor appscode/corek8sappscodecom-podview-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 +$ helm upgrade -i corek8sappscodecom-podview-editor appscode/corek8sappscodecom-podview-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corek8sappscodecom-podview-editor appscode/corek8sappscodecom-podview-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i corek8sappscodecom-podview-editor appscode/corek8sappscodecom-podview-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/corek8sappscodecom-project-editor/Chart.yaml b/charts/corek8sappscodecom-project-editor/Chart.yaml index 4e50d32f7e..cf3c9a48f9 100644 --- a/charts/corek8sappscodecom-project-editor/Chart.yaml +++ b/charts/corek8sappscodecom-project-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.k8s.appscode.com","version":"v1alpha1","resource":"projects"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Project Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corek8sappscodecom-project-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/corek8sappscodecom-project-editor/README.md b/charts/corek8sappscodecom-project-editor/README.md index cb57faea7d..227f8e7346 100644 --- a/charts/corek8sappscodecom-project-editor/README.md +++ b/charts/corek8sappscodecom-project-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corek8sappscodecom-project-editor --version=v0.38.0 -$ helm upgrade -i corek8sappscodecom-project-editor appscode/corek8sappscodecom-project-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/corek8sappscodecom-project-editor --version=v0.39.0 +$ helm upgrade -i corek8sappscodecom-project-editor appscode/corek8sappscodecom-project-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Project Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `corek8sappscodecom-project-editor`: ```bash -$ helm upgrade -i corek8sappscodecom-project-editor appscode/corek8sappscodecom-project-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i corek8sappscodecom-project-editor appscode/corek8sappscodecom-project-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Project Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corek8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corek8sappscodecom-project-editor appscode/corek8sappscodecom-project-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 +$ helm upgrade -i corek8sappscodecom-project-editor appscode/corek8sappscodecom-project-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corek8sappscodecom-project-editor appscode/corek8sappscodecom-project-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i corek8sappscodecom-project-editor appscode/corek8sappscodecom-project-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/corek8sappscodecom-resourcecalculator-editor/Chart.yaml b/charts/corek8sappscodecom-resourcecalculator-editor/Chart.yaml index 0288030442..99793ed970 100644 --- a/charts/corek8sappscodecom-resourcecalculator-editor/Chart.yaml +++ b/charts/corek8sappscodecom-resourcecalculator-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.k8s.appscode.com","version":"v1alpha1","resource":"resourcecalculators"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ResourceCalculator Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corek8sappscodecom-resourcecalculator-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/corek8sappscodecom-resourcecalculator-editor/README.md b/charts/corek8sappscodecom-resourcecalculator-editor/README.md index 3ea313e7d2..7f06bd1505 100644 --- a/charts/corek8sappscodecom-resourcecalculator-editor/README.md +++ b/charts/corek8sappscodecom-resourcecalculator-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corek8sappscodecom-resourcecalculator-editor --version=v0.38.0 -$ helm upgrade -i corek8sappscodecom-resourcecalculator-editor appscode/corek8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/corek8sappscodecom-resourcecalculator-editor --version=v0.39.0 +$ helm upgrade -i corek8sappscodecom-resourcecalculator-editor appscode/corek8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceCalculator Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `corek8sappscodecom-resourcecalculator-editor`: ```bash -$ helm upgrade -i corek8sappscodecom-resourcecalculator-editor appscode/corek8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i corek8sappscodecom-resourcecalculator-editor appscode/corek8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ResourceCalculator Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corek8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corek8sappscodecom-resourcecalculator-editor appscode/corek8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 +$ helm upgrade -i corek8sappscodecom-resourcecalculator-editor appscode/corek8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corek8sappscodecom-resourcecalculator-editor appscode/corek8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i corek8sappscodecom-resourcecalculator-editor appscode/corek8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/corek8sappscodecom-resourcesummary-editor/Chart.yaml b/charts/corek8sappscodecom-resourcesummary-editor/Chart.yaml index 39dfa4b7d6..13ea1dea41 100644 --- a/charts/corek8sappscodecom-resourcesummary-editor/Chart.yaml +++ b/charts/corek8sappscodecom-resourcesummary-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.k8s.appscode.com","version":"v1alpha1","resource":"resourcesummaries"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ResourceSummary Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corek8sappscodecom-resourcesummary-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/corek8sappscodecom-resourcesummary-editor/README.md b/charts/corek8sappscodecom-resourcesummary-editor/README.md index da157daa71..b610d1b05f 100644 --- a/charts/corek8sappscodecom-resourcesummary-editor/README.md +++ b/charts/corek8sappscodecom-resourcesummary-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corek8sappscodecom-resourcesummary-editor --version=v0.38.0 -$ helm upgrade -i corek8sappscodecom-resourcesummary-editor appscode/corek8sappscodecom-resourcesummary-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/corek8sappscodecom-resourcesummary-editor --version=v0.39.0 +$ helm upgrade -i corek8sappscodecom-resourcesummary-editor appscode/corek8sappscodecom-resourcesummary-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceSummary Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `corek8sappscodecom-resourcesummary-editor`: ```bash -$ helm upgrade -i corek8sappscodecom-resourcesummary-editor appscode/corek8sappscodecom-resourcesummary-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i corek8sappscodecom-resourcesummary-editor appscode/corek8sappscodecom-resourcesummary-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ResourceSummary Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corek8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corek8sappscodecom-resourcesummary-editor appscode/corek8sappscodecom-resourcesummary-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 +$ helm upgrade -i corek8sappscodecom-resourcesummary-editor appscode/corek8sappscodecom-resourcesummary-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corek8sappscodecom-resourcesummary-editor appscode/corek8sappscodecom-resourcesummary-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i corek8sappscodecom-resourcesummary-editor appscode/corek8sappscodecom-resourcesummary-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-backupbatch-editor/Chart.yaml b/charts/corekubestashcom-backupbatch-editor/Chart.yaml index 1c60eb7f3d..4b3c6a3add 100644 --- a/charts/corekubestashcom-backupbatch-editor/Chart.yaml +++ b/charts/corekubestashcom-backupbatch-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.kubestash.com","version":"v1alpha1","resource":"backupbatches"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: BackupBatch Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corekubestashcom-backupbatch-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/corekubestashcom-backupbatch-editor/README.md b/charts/corekubestashcom-backupbatch-editor/README.md index 1d1f3f49e2..8335944175 100644 --- a/charts/corekubestashcom-backupbatch-editor/README.md +++ b/charts/corekubestashcom-backupbatch-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-backupbatch-editor --version=v0.38.0 -$ helm upgrade -i corekubestashcom-backupbatch-editor appscode/corekubestashcom-backupbatch-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/corekubestashcom-backupbatch-editor --version=v0.39.0 +$ helm upgrade -i corekubestashcom-backupbatch-editor appscode/corekubestashcom-backupbatch-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupBatch Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `corekubestashcom-backupbatch-editor`: ```bash -$ helm upgrade -i corekubestashcom-backupbatch-editor appscode/corekubestashcom-backupbatch-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i corekubestashcom-backupbatch-editor appscode/corekubestashcom-backupbatch-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a BackupBatch Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corekubestashcom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corekubestashcom-backupbatch-editor appscode/corekubestashcom-backupbatch-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=core.kubestash.com/v1alpha1 +$ helm upgrade -i corekubestashcom-backupbatch-editor appscode/corekubestashcom-backupbatch-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=core.kubestash.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corekubestashcom-backupbatch-editor appscode/corekubestashcom-backupbatch-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i corekubestashcom-backupbatch-editor appscode/corekubestashcom-backupbatch-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-backupblueprint-editor/Chart.yaml b/charts/corekubestashcom-backupblueprint-editor/Chart.yaml index 2a5a30aed9..a39845552c 100644 --- a/charts/corekubestashcom-backupblueprint-editor/Chart.yaml +++ b/charts/corekubestashcom-backupblueprint-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.kubestash.com","version":"v1alpha1","resource":"backupblueprints"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: BackupBlueprint Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corekubestashcom-backupblueprint-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/corekubestashcom-backupblueprint-editor/README.md b/charts/corekubestashcom-backupblueprint-editor/README.md index 881edd7215..e05aee907f 100644 --- a/charts/corekubestashcom-backupblueprint-editor/README.md +++ b/charts/corekubestashcom-backupblueprint-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-backupblueprint-editor --version=v0.38.0 -$ helm upgrade -i corekubestashcom-backupblueprint-editor appscode/corekubestashcom-backupblueprint-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/corekubestashcom-backupblueprint-editor --version=v0.39.0 +$ helm upgrade -i corekubestashcom-backupblueprint-editor appscode/corekubestashcom-backupblueprint-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupBlueprint Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `corekubestashcom-backupblueprint-editor`: ```bash -$ helm upgrade -i corekubestashcom-backupblueprint-editor appscode/corekubestashcom-backupblueprint-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i corekubestashcom-backupblueprint-editor appscode/corekubestashcom-backupblueprint-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a BackupBlueprint Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corekubestashcom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corekubestashcom-backupblueprint-editor appscode/corekubestashcom-backupblueprint-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=core.kubestash.com/v1alpha1 +$ helm upgrade -i corekubestashcom-backupblueprint-editor appscode/corekubestashcom-backupblueprint-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=core.kubestash.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corekubestashcom-backupblueprint-editor appscode/corekubestashcom-backupblueprint-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i corekubestashcom-backupblueprint-editor appscode/corekubestashcom-backupblueprint-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-backupconfiguration-editor-options/Chart.yaml b/charts/corekubestashcom-backupconfiguration-editor-options/Chart.yaml index 098e7728ef..72bfe4ad5a 100644 --- a/charts/corekubestashcom-backupconfiguration-editor-options/Chart.yaml +++ b/charts/corekubestashcom-backupconfiguration-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: corekubestashcom-backupconfiguration-editor-options description: BackupConfiguration Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/corekubestashcom-backupconfiguration-editor-options/README.md b/charts/corekubestashcom-backupconfiguration-editor-options/README.md index bcdfe7b098..b1ce6f9b1b 100644 --- a/charts/corekubestashcom-backupconfiguration-editor-options/README.md +++ b/charts/corekubestashcom-backupconfiguration-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-backupconfiguration-editor-options --version=v0.38.0 -$ helm upgrade -i kubestashcom-backupconfiguration-editor-options appscode/corekubestashcom-backupconfiguration-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/corekubestashcom-backupconfiguration-editor-options --version=v0.39.0 +$ helm upgrade -i kubestashcom-backupconfiguration-editor-options appscode/corekubestashcom-backupconfiguration-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Backupconfiguration Editor UI Options on a [Kubernetes](htt To install/upgrade the chart with the release name `kubestashcom-backupconfiguration-editor-options`: ```bash -$ helm upgrade -i kubestashcom-backupconfiguration-editor-options appscode/corekubestashcom-backupconfiguration-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubestashcom-backupconfiguration-editor-options appscode/corekubestashcom-backupconfiguration-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Backupconfiguration Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -70,12 +70,12 @@ The following table lists the configurable parameters of the `corekubestashcom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubestashcom-backupconfiguration-editor-options appscode/corekubestashcom-backupconfiguration-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=core.kubestash.com +$ helm upgrade -i kubestashcom-backupconfiguration-editor-options appscode/corekubestashcom-backupconfiguration-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=core.kubestash.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubestashcom-backupconfiguration-editor-options appscode/corekubestashcom-backupconfiguration-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubestashcom-backupconfiguration-editor-options appscode/corekubestashcom-backupconfiguration-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-backupconfiguration-editor/Chart.yaml b/charts/corekubestashcom-backupconfiguration-editor/Chart.yaml index 63c9d188f3..3d368e951a 100644 --- a/charts/corekubestashcom-backupconfiguration-editor/Chart.yaml +++ b/charts/corekubestashcom-backupconfiguration-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: core.kubestash.com\n kind: BackupConfiguration\n\ \ version: v1alpha1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: BackupConfiguration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: corekubestashcom-backupconfiguration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/corekubestashcom-backupconfiguration-editor/README.md b/charts/corekubestashcom-backupconfiguration-editor/README.md index cef1d8efbc..8f3a05357d 100644 --- a/charts/corekubestashcom-backupconfiguration-editor/README.md +++ b/charts/corekubestashcom-backupconfiguration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-backupconfiguration-editor --version=v0.38.0 -$ helm upgrade -i corekubestashcom-backupconfiguration-editor appscode/corekubestashcom-backupconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/corekubestashcom-backupconfiguration-editor --version=v0.39.0 +$ helm upgrade -i corekubestashcom-backupconfiguration-editor appscode/corekubestashcom-backupconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupConfiguration Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `corekubestashcom-backupconfiguration-editor`: ```bash -$ helm upgrade -i corekubestashcom-backupconfiguration-editor appscode/corekubestashcom-backupconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i corekubestashcom-backupconfiguration-editor appscode/corekubestashcom-backupconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a BackupConfiguration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -60,12 +60,12 @@ The following table lists the configurable parameters of the `corekubestashcom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corekubestashcom-backupconfiguration-editor appscode/corekubestashcom-backupconfiguration-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=core.kubestash.com +$ helm upgrade -i corekubestashcom-backupconfiguration-editor appscode/corekubestashcom-backupconfiguration-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=core.kubestash.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corekubestashcom-backupconfiguration-editor appscode/corekubestashcom-backupconfiguration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i corekubestashcom-backupconfiguration-editor appscode/corekubestashcom-backupconfiguration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-backupsession-editor-options/Chart.yaml b/charts/corekubestashcom-backupsession-editor-options/Chart.yaml index 7ec3e5f053..9fadc03150 100644 --- a/charts/corekubestashcom-backupsession-editor-options/Chart.yaml +++ b/charts/corekubestashcom-backupsession-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: corekubestashcom-backupsession-editor-options description: KubeStash BackupSession Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/corekubestashcom-backupsession-editor-options/README.md b/charts/corekubestashcom-backupsession-editor-options/README.md index 47e2f85d84..721adaabdd 100644 --- a/charts/corekubestashcom-backupsession-editor-options/README.md +++ b/charts/corekubestashcom-backupsession-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-backupsession-editor-options --version=v0.38.0 -$ helm upgrade -i corekubestashcom-backupsession-editor-options appscode/corekubestashcom-backupsession-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/corekubestashcom-backupsession-editor-options --version=v0.39.0 +$ helm upgrade -i corekubestashcom-backupsession-editor-options appscode/corekubestashcom-backupsession-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a KubeStash BackupSession Editor UI Options on a [Kubernetes] To install/upgrade the chart with the release name `corekubestashcom-backupsession-editor-options`: ```bash -$ helm upgrade -i corekubestashcom-backupsession-editor-options appscode/corekubestashcom-backupsession-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i corekubestashcom-backupsession-editor-options appscode/corekubestashcom-backupsession-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a KubeStash BackupSession Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -67,12 +67,12 @@ The following table lists the configurable parameters of the `corekubestashcom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corekubestashcom-backupsession-editor-options appscode/corekubestashcom-backupsession-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=core.kubestash.com +$ helm upgrade -i corekubestashcom-backupsession-editor-options appscode/corekubestashcom-backupsession-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=core.kubestash.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corekubestashcom-backupsession-editor-options appscode/corekubestashcom-backupsession-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i corekubestashcom-backupsession-editor-options appscode/corekubestashcom-backupsession-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-backupsession-editor/Chart.yaml b/charts/corekubestashcom-backupsession-editor/Chart.yaml index 6c8741f35a..2f66e5d28e 100644 --- a/charts/corekubestashcom-backupsession-editor/Chart.yaml +++ b/charts/corekubestashcom-backupsession-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: core.kubestash.com\n kind: BackupSession\n\ \ version: v1alpha1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: BackupSession Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: corekubestashcom-backupsession-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/corekubestashcom-backupsession-editor/README.md b/charts/corekubestashcom-backupsession-editor/README.md index 6ee8a1080b..6d448466c8 100644 --- a/charts/corekubestashcom-backupsession-editor/README.md +++ b/charts/corekubestashcom-backupsession-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-backupsession-editor --version=v0.38.0 -$ helm upgrade -i corekubestashcom-backupsession-editor appscode/corekubestashcom-backupsession-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/corekubestashcom-backupsession-editor --version=v0.39.0 +$ helm upgrade -i corekubestashcom-backupsession-editor appscode/corekubestashcom-backupsession-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupSession Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `corekubestashcom-backupsession-editor`: ```bash -$ helm upgrade -i corekubestashcom-backupsession-editor appscode/corekubestashcom-backupsession-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i corekubestashcom-backupsession-editor appscode/corekubestashcom-backupsession-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a BackupSession Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -60,12 +60,12 @@ The following table lists the configurable parameters of the `corekubestashcom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corekubestashcom-backupsession-editor appscode/corekubestashcom-backupsession-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=core.kubestash.com +$ helm upgrade -i corekubestashcom-backupsession-editor appscode/corekubestashcom-backupsession-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=core.kubestash.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corekubestashcom-backupsession-editor appscode/corekubestashcom-backupsession-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i corekubestashcom-backupsession-editor appscode/corekubestashcom-backupsession-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-backupverificationsession-editor/Chart.yaml b/charts/corekubestashcom-backupverificationsession-editor/Chart.yaml index 6b1377e2a0..29a2afadd1 100644 --- a/charts/corekubestashcom-backupverificationsession-editor/Chart.yaml +++ b/charts/corekubestashcom-backupverificationsession-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.kubestash.com","version":"v1alpha1","resource":"backupverificationsession"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: BackupVerificationSession Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corekubestashcom-backupverificationsession-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/corekubestashcom-backupverificationsession-editor/README.md b/charts/corekubestashcom-backupverificationsession-editor/README.md index 5f62166ac1..a0fc9749fb 100644 --- a/charts/corekubestashcom-backupverificationsession-editor/README.md +++ b/charts/corekubestashcom-backupverificationsession-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-backupverificationsession-editor --version=v0.38.0 -$ helm upgrade -i corekubestashcom-backupverificationsession-editor appscode/corekubestashcom-backupverificationsession-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/corekubestashcom-backupverificationsession-editor --version=v0.39.0 +$ helm upgrade -i corekubestashcom-backupverificationsession-editor appscode/corekubestashcom-backupverificationsession-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupVerificationSession Editor on a [Kubernetes](http://k To install/upgrade the chart with the release name `corekubestashcom-backupverificationsession-editor`: ```bash -$ helm upgrade -i corekubestashcom-backupverificationsession-editor appscode/corekubestashcom-backupverificationsession-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i corekubestashcom-backupverificationsession-editor appscode/corekubestashcom-backupverificationsession-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a BackupVerificationSession Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corekubestashcom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corekubestashcom-backupverificationsession-editor appscode/corekubestashcom-backupverificationsession-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=core.kubestash.com/v1alpha1 +$ helm upgrade -i corekubestashcom-backupverificationsession-editor appscode/corekubestashcom-backupverificationsession-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=core.kubestash.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corekubestashcom-backupverificationsession-editor appscode/corekubestashcom-backupverificationsession-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i corekubestashcom-backupverificationsession-editor appscode/corekubestashcom-backupverificationsession-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-backupverifier-editor/Chart.yaml b/charts/corekubestashcom-backupverifier-editor/Chart.yaml index a174ff7a1d..63edfa734d 100644 --- a/charts/corekubestashcom-backupverifier-editor/Chart.yaml +++ b/charts/corekubestashcom-backupverifier-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.kubestash.com","version":"v1alpha1","resource":"backupverifier"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: BackupVerifier Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corekubestashcom-backupverifier-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/corekubestashcom-backupverifier-editor/README.md b/charts/corekubestashcom-backupverifier-editor/README.md index 8da149cdd0..980024e2a9 100644 --- a/charts/corekubestashcom-backupverifier-editor/README.md +++ b/charts/corekubestashcom-backupverifier-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-backupverifier-editor --version=v0.38.0 -$ helm upgrade -i corekubestashcom-backupverifier-editor appscode/corekubestashcom-backupverifier-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/corekubestashcom-backupverifier-editor --version=v0.39.0 +$ helm upgrade -i corekubestashcom-backupverifier-editor appscode/corekubestashcom-backupverifier-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupVerifier Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `corekubestashcom-backupverifier-editor`: ```bash -$ helm upgrade -i corekubestashcom-backupverifier-editor appscode/corekubestashcom-backupverifier-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i corekubestashcom-backupverifier-editor appscode/corekubestashcom-backupverifier-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a BackupVerifier Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corekubestashcom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corekubestashcom-backupverifier-editor appscode/corekubestashcom-backupverifier-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=core.kubestash.com/v1alpha1 +$ helm upgrade -i corekubestashcom-backupverifier-editor appscode/corekubestashcom-backupverifier-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=core.kubestash.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corekubestashcom-backupverifier-editor appscode/corekubestashcom-backupverifier-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i corekubestashcom-backupverifier-editor appscode/corekubestashcom-backupverifier-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-hooktemplate-editor/Chart.yaml b/charts/corekubestashcom-hooktemplate-editor/Chart.yaml index b4677e1f8a..dea8292f3d 100644 --- a/charts/corekubestashcom-hooktemplate-editor/Chart.yaml +++ b/charts/corekubestashcom-hooktemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.kubestash.com","version":"v1alpha1","resource":"hooktemplates"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: HookTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corekubestashcom-hooktemplate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/corekubestashcom-hooktemplate-editor/README.md b/charts/corekubestashcom-hooktemplate-editor/README.md index 6b35284e57..efa42dba47 100644 --- a/charts/corekubestashcom-hooktemplate-editor/README.md +++ b/charts/corekubestashcom-hooktemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-hooktemplate-editor --version=v0.38.0 -$ helm upgrade -i corekubestashcom-hooktemplate-editor appscode/corekubestashcom-hooktemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/corekubestashcom-hooktemplate-editor --version=v0.39.0 +$ helm upgrade -i corekubestashcom-hooktemplate-editor appscode/corekubestashcom-hooktemplate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HookTemplate Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `corekubestashcom-hooktemplate-editor`: ```bash -$ helm upgrade -i corekubestashcom-hooktemplate-editor appscode/corekubestashcom-hooktemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i corekubestashcom-hooktemplate-editor appscode/corekubestashcom-hooktemplate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a HookTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corekubestashcom-h Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corekubestashcom-hooktemplate-editor appscode/corekubestashcom-hooktemplate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=core.kubestash.com/v1alpha1 +$ helm upgrade -i corekubestashcom-hooktemplate-editor appscode/corekubestashcom-hooktemplate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=core.kubestash.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corekubestashcom-hooktemplate-editor appscode/corekubestashcom-hooktemplate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i corekubestashcom-hooktemplate-editor appscode/corekubestashcom-hooktemplate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-restoresession-editor-options/Chart.yaml b/charts/corekubestashcom-restoresession-editor-options/Chart.yaml index 0f8e4bcceb..821ee4008e 100644 --- a/charts/corekubestashcom-restoresession-editor-options/Chart.yaml +++ b/charts/corekubestashcom-restoresession-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: corekubestashcom-restoresession-editor-options description: KubeStash RestoreSession Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/corekubestashcom-restoresession-editor-options/README.md b/charts/corekubestashcom-restoresession-editor-options/README.md index 451452cdbb..9952016ea2 100644 --- a/charts/corekubestashcom-restoresession-editor-options/README.md +++ b/charts/corekubestashcom-restoresession-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-restoresession-editor-options --version=v0.38.0 -$ helm upgrade -i corekubestashcom-restoresession-editor-options appscode/corekubestashcom-restoresession-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/corekubestashcom-restoresession-editor-options --version=v0.39.0 +$ helm upgrade -i corekubestashcom-restoresession-editor-options appscode/corekubestashcom-restoresession-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a KubeStash RestoreSession Editor UI Options on a [Kubernetes To install/upgrade the chart with the release name `corekubestashcom-restoresession-editor-options`: ```bash -$ helm upgrade -i corekubestashcom-restoresession-editor-options appscode/corekubestashcom-restoresession-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i corekubestashcom-restoresession-editor-options appscode/corekubestashcom-restoresession-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a KubeStash RestoreSession Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -72,12 +72,12 @@ The following table lists the configurable parameters of the `corekubestashcom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corekubestashcom-restoresession-editor-options appscode/corekubestashcom-restoresession-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=core.kubestash.com +$ helm upgrade -i corekubestashcom-restoresession-editor-options appscode/corekubestashcom-restoresession-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=core.kubestash.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corekubestashcom-restoresession-editor-options appscode/corekubestashcom-restoresession-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i corekubestashcom-restoresession-editor-options appscode/corekubestashcom-restoresession-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-restoresession-editor/Chart.yaml b/charts/corekubestashcom-restoresession-editor/Chart.yaml index 0c09747814..386e0df619 100644 --- a/charts/corekubestashcom-restoresession-editor/Chart.yaml +++ b/charts/corekubestashcom-restoresession-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: core.kubestash.com\n kind: RestoreSession\n\ \ version: v1alpha1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RestoreSession Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: corekubestashcom-restoresession-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/corekubestashcom-restoresession-editor/README.md b/charts/corekubestashcom-restoresession-editor/README.md index fe579dce54..dc99318d24 100644 --- a/charts/corekubestashcom-restoresession-editor/README.md +++ b/charts/corekubestashcom-restoresession-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-restoresession-editor --version=v0.38.0 -$ helm upgrade -i corekubestashcom-restoresession-editor appscode/corekubestashcom-restoresession-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/corekubestashcom-restoresession-editor --version=v0.39.0 +$ helm upgrade -i corekubestashcom-restoresession-editor appscode/corekubestashcom-restoresession-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RestoreSession Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `corekubestashcom-restoresession-editor`: ```bash -$ helm upgrade -i corekubestashcom-restoresession-editor appscode/corekubestashcom-restoresession-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i corekubestashcom-restoresession-editor appscode/corekubestashcom-restoresession-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RestoreSession Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -60,12 +60,12 @@ The following table lists the configurable parameters of the `corekubestashcom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corekubestashcom-restoresession-editor appscode/corekubestashcom-restoresession-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=core.kubestash.com +$ helm upgrade -i corekubestashcom-restoresession-editor appscode/corekubestashcom-restoresession-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=core.kubestash.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corekubestashcom-restoresession-editor appscode/corekubestashcom-restoresession-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i corekubestashcom-restoresession-editor appscode/corekubestashcom-restoresession-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-account-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-account-editor/Chart.yaml index dbea89d784..286ff0a361 100644 --- a/charts/cosmosdbazurekubedbcom-account-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-account-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"accounts"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Account Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-account-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cosmosdbazurekubedbcom-account-editor/README.md b/charts/cosmosdbazurekubedbcom-account-editor/README.md index b92d2b770e..6bde1b3e8e 100644 --- a/charts/cosmosdbazurekubedbcom-account-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-account-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-account-editor --version=v0.38.0 -$ helm upgrade -i cosmosdbazurekubedbcom-account-editor appscode/cosmosdbazurekubedbcom-account-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-account-editor --version=v0.39.0 +$ helm upgrade -i cosmosdbazurekubedbcom-account-editor appscode/cosmosdbazurekubedbcom-account-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Account Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-account-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-account-editor appscode/cosmosdbazurekubedbcom-account-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cosmosdbazurekubedbcom-account-editor appscode/cosmosdbazurekubedbcom-account-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Account Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-account-editor appscode/cosmosdbazurekubedbcom-account-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-account-editor appscode/cosmosdbazurekubedbcom-account-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-account-editor appscode/cosmosdbazurekubedbcom-account-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-account-editor appscode/cosmosdbazurekubedbcom-account-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-cassandracluster-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-cassandracluster-editor/Chart.yaml index 4294ce2956..a9fe1e0631 100644 --- a/charts/cosmosdbazurekubedbcom-cassandracluster-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-cassandracluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"cassandraclusters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: CassandraCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-cassandracluster-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cosmosdbazurekubedbcom-cassandracluster-editor/README.md b/charts/cosmosdbazurekubedbcom-cassandracluster-editor/README.md index 5e075e3f9f..f4571c5f94 100644 --- a/charts/cosmosdbazurekubedbcom-cassandracluster-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-cassandracluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-cassandracluster-editor --version=v0.38.0 -$ helm upgrade -i cosmosdbazurekubedbcom-cassandracluster-editor appscode/cosmosdbazurekubedbcom-cassandracluster-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-cassandracluster-editor --version=v0.39.0 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandracluster-editor appscode/cosmosdbazurekubedbcom-cassandracluster-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CassandraCluster Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-cassandracluster-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandracluster-editor appscode/cosmosdbazurekubedbcom-cassandracluster-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandracluster-editor appscode/cosmosdbazurekubedbcom-cassandracluster-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a CassandraCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandracluster-editor appscode/cosmosdbazurekubedbcom-cassandracluster-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandracluster-editor appscode/cosmosdbazurekubedbcom-cassandracluster-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandracluster-editor appscode/cosmosdbazurekubedbcom-cassandracluster-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-cassandracluster-editor appscode/cosmosdbazurekubedbcom-cassandracluster-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-cassandradatacenter-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-cassandradatacenter-editor/Chart.yaml index 191d4c43ec..de5a5ac19e 100644 --- a/charts/cosmosdbazurekubedbcom-cassandradatacenter-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-cassandradatacenter-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"cassandradatacenters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: CassandraDatacenter Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-cassandradatacenter-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cosmosdbazurekubedbcom-cassandradatacenter-editor/README.md b/charts/cosmosdbazurekubedbcom-cassandradatacenter-editor/README.md index 455a5e2e4e..e1e9cefc74 100644 --- a/charts/cosmosdbazurekubedbcom-cassandradatacenter-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-cassandradatacenter-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-cassandradatacenter-editor --version=v0.38.0 -$ helm upgrade -i cosmosdbazurekubedbcom-cassandradatacenter-editor appscode/cosmosdbazurekubedbcom-cassandradatacenter-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-cassandradatacenter-editor --version=v0.39.0 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandradatacenter-editor appscode/cosmosdbazurekubedbcom-cassandradatacenter-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CassandraDatacenter Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-cassandradatacenter-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandradatacenter-editor appscode/cosmosdbazurekubedbcom-cassandradatacenter-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandradatacenter-editor appscode/cosmosdbazurekubedbcom-cassandradatacenter-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a CassandraDatacenter Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandradatacenter-editor appscode/cosmosdbazurekubedbcom-cassandradatacenter-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandradatacenter-editor appscode/cosmosdbazurekubedbcom-cassandradatacenter-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandradatacenter-editor appscode/cosmosdbazurekubedbcom-cassandradatacenter-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-cassandradatacenter-editor appscode/cosmosdbazurekubedbcom-cassandradatacenter-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-cassandrakeyspace-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-cassandrakeyspace-editor/Chart.yaml index 0dcb5ea673..54632a19da 100644 --- a/charts/cosmosdbazurekubedbcom-cassandrakeyspace-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-cassandrakeyspace-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"cassandrakeyspaces"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: CassandraKeySpace Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-cassandrakeyspace-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cosmosdbazurekubedbcom-cassandrakeyspace-editor/README.md b/charts/cosmosdbazurekubedbcom-cassandrakeyspace-editor/README.md index 6f3ce9e690..f85eb1b9ee 100644 --- a/charts/cosmosdbazurekubedbcom-cassandrakeyspace-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-cassandrakeyspace-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-cassandrakeyspace-editor --version=v0.38.0 -$ helm upgrade -i cosmosdbazurekubedbcom-cassandrakeyspace-editor appscode/cosmosdbazurekubedbcom-cassandrakeyspace-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-cassandrakeyspace-editor --version=v0.39.0 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandrakeyspace-editor appscode/cosmosdbazurekubedbcom-cassandrakeyspace-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CassandraKeySpace Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-cassandrakeyspace-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandrakeyspace-editor appscode/cosmosdbazurekubedbcom-cassandrakeyspace-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandrakeyspace-editor appscode/cosmosdbazurekubedbcom-cassandrakeyspace-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a CassandraKeySpace Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandrakeyspace-editor appscode/cosmosdbazurekubedbcom-cassandrakeyspace-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandrakeyspace-editor appscode/cosmosdbazurekubedbcom-cassandrakeyspace-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandrakeyspace-editor appscode/cosmosdbazurekubedbcom-cassandrakeyspace-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-cassandrakeyspace-editor appscode/cosmosdbazurekubedbcom-cassandrakeyspace-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-cassandratable-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-cassandratable-editor/Chart.yaml index 812668e3ae..445cb62bc7 100644 --- a/charts/cosmosdbazurekubedbcom-cassandratable-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-cassandratable-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"cassandratables"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: CassandraTable Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-cassandratable-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cosmosdbazurekubedbcom-cassandratable-editor/README.md b/charts/cosmosdbazurekubedbcom-cassandratable-editor/README.md index 8f3e9d5345..525ff5dfec 100644 --- a/charts/cosmosdbazurekubedbcom-cassandratable-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-cassandratable-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-cassandratable-editor --version=v0.38.0 -$ helm upgrade -i cosmosdbazurekubedbcom-cassandratable-editor appscode/cosmosdbazurekubedbcom-cassandratable-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-cassandratable-editor --version=v0.39.0 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandratable-editor appscode/cosmosdbazurekubedbcom-cassandratable-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CassandraTable Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-cassandratable-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandratable-editor appscode/cosmosdbazurekubedbcom-cassandratable-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandratable-editor appscode/cosmosdbazurekubedbcom-cassandratable-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a CassandraTable Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandratable-editor appscode/cosmosdbazurekubedbcom-cassandratable-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandratable-editor appscode/cosmosdbazurekubedbcom-cassandratable-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandratable-editor appscode/cosmosdbazurekubedbcom-cassandratable-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-cassandratable-editor appscode/cosmosdbazurekubedbcom-cassandratable-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-gremlindatabase-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-gremlindatabase-editor/Chart.yaml index d4c73dd21a..616cf0c987 100644 --- a/charts/cosmosdbazurekubedbcom-gremlindatabase-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-gremlindatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"gremlindatabases"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GremlinDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-gremlindatabase-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cosmosdbazurekubedbcom-gremlindatabase-editor/README.md b/charts/cosmosdbazurekubedbcom-gremlindatabase-editor/README.md index 6f0a64f045..15d451b980 100644 --- a/charts/cosmosdbazurekubedbcom-gremlindatabase-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-gremlindatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-gremlindatabase-editor --version=v0.38.0 -$ helm upgrade -i cosmosdbazurekubedbcom-gremlindatabase-editor appscode/cosmosdbazurekubedbcom-gremlindatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-gremlindatabase-editor --version=v0.39.0 +$ helm upgrade -i cosmosdbazurekubedbcom-gremlindatabase-editor appscode/cosmosdbazurekubedbcom-gremlindatabase-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GremlinDatabase Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-gremlindatabase-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-gremlindatabase-editor appscode/cosmosdbazurekubedbcom-gremlindatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cosmosdbazurekubedbcom-gremlindatabase-editor appscode/cosmosdbazurekubedbcom-gremlindatabase-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GremlinDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-gremlindatabase-editor appscode/cosmosdbazurekubedbcom-gremlindatabase-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-gremlindatabase-editor appscode/cosmosdbazurekubedbcom-gremlindatabase-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-gremlindatabase-editor appscode/cosmosdbazurekubedbcom-gremlindatabase-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-gremlindatabase-editor appscode/cosmosdbazurekubedbcom-gremlindatabase-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-gremlingraph-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-gremlingraph-editor/Chart.yaml index 5661081faf..91e891b08d 100644 --- a/charts/cosmosdbazurekubedbcom-gremlingraph-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-gremlingraph-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"gremlingraphs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GremlinGraph Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-gremlingraph-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cosmosdbazurekubedbcom-gremlingraph-editor/README.md b/charts/cosmosdbazurekubedbcom-gremlingraph-editor/README.md index cf81c8e854..986a79d80f 100644 --- a/charts/cosmosdbazurekubedbcom-gremlingraph-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-gremlingraph-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-gremlingraph-editor --version=v0.38.0 -$ helm upgrade -i cosmosdbazurekubedbcom-gremlingraph-editor appscode/cosmosdbazurekubedbcom-gremlingraph-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-gremlingraph-editor --version=v0.39.0 +$ helm upgrade -i cosmosdbazurekubedbcom-gremlingraph-editor appscode/cosmosdbazurekubedbcom-gremlingraph-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GremlinGraph Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-gremlingraph-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-gremlingraph-editor appscode/cosmosdbazurekubedbcom-gremlingraph-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cosmosdbazurekubedbcom-gremlingraph-editor appscode/cosmosdbazurekubedbcom-gremlingraph-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GremlinGraph Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-gremlingraph-editor appscode/cosmosdbazurekubedbcom-gremlingraph-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-gremlingraph-editor appscode/cosmosdbazurekubedbcom-gremlingraph-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-gremlingraph-editor appscode/cosmosdbazurekubedbcom-gremlingraph-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-gremlingraph-editor appscode/cosmosdbazurekubedbcom-gremlingraph-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-mongocollection-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-mongocollection-editor/Chart.yaml index 45149af41f..eedcdbaea1 100644 --- a/charts/cosmosdbazurekubedbcom-mongocollection-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-mongocollection-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"mongocollections"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MongoCollection Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-mongocollection-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cosmosdbazurekubedbcom-mongocollection-editor/README.md b/charts/cosmosdbazurekubedbcom-mongocollection-editor/README.md index 4dcc3c5682..c2d5df24bf 100644 --- a/charts/cosmosdbazurekubedbcom-mongocollection-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-mongocollection-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-mongocollection-editor --version=v0.38.0 -$ helm upgrade -i cosmosdbazurekubedbcom-mongocollection-editor appscode/cosmosdbazurekubedbcom-mongocollection-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-mongocollection-editor --version=v0.39.0 +$ helm upgrade -i cosmosdbazurekubedbcom-mongocollection-editor appscode/cosmosdbazurekubedbcom-mongocollection-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoCollection Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-mongocollection-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-mongocollection-editor appscode/cosmosdbazurekubedbcom-mongocollection-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cosmosdbazurekubedbcom-mongocollection-editor appscode/cosmosdbazurekubedbcom-mongocollection-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MongoCollection Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-mongocollection-editor appscode/cosmosdbazurekubedbcom-mongocollection-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-mongocollection-editor appscode/cosmosdbazurekubedbcom-mongocollection-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-mongocollection-editor appscode/cosmosdbazurekubedbcom-mongocollection-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-mongocollection-editor appscode/cosmosdbazurekubedbcom-mongocollection-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-mongodatabase-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-mongodatabase-editor/Chart.yaml index c285dfdda4..8501270a28 100644 --- a/charts/cosmosdbazurekubedbcom-mongodatabase-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-mongodatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"mongodatabases"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MongoDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-mongodatabase-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cosmosdbazurekubedbcom-mongodatabase-editor/README.md b/charts/cosmosdbazurekubedbcom-mongodatabase-editor/README.md index b322f9d1a2..77b8cb1424 100644 --- a/charts/cosmosdbazurekubedbcom-mongodatabase-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-mongodatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-mongodatabase-editor --version=v0.38.0 -$ helm upgrade -i cosmosdbazurekubedbcom-mongodatabase-editor appscode/cosmosdbazurekubedbcom-mongodatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-mongodatabase-editor --version=v0.39.0 +$ helm upgrade -i cosmosdbazurekubedbcom-mongodatabase-editor appscode/cosmosdbazurekubedbcom-mongodatabase-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDatabase Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-mongodatabase-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-mongodatabase-editor appscode/cosmosdbazurekubedbcom-mongodatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cosmosdbazurekubedbcom-mongodatabase-editor appscode/cosmosdbazurekubedbcom-mongodatabase-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MongoDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-mongodatabase-editor appscode/cosmosdbazurekubedbcom-mongodatabase-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-mongodatabase-editor appscode/cosmosdbazurekubedbcom-mongodatabase-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-mongodatabase-editor appscode/cosmosdbazurekubedbcom-mongodatabase-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-mongodatabase-editor appscode/cosmosdbazurekubedbcom-mongodatabase-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-sqlcontainer-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-sqlcontainer-editor/Chart.yaml index c2a06a203c..95f7253ea2 100644 --- a/charts/cosmosdbazurekubedbcom-sqlcontainer-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-sqlcontainer-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"sqlcontainers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SQLContainer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-sqlcontainer-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cosmosdbazurekubedbcom-sqlcontainer-editor/README.md b/charts/cosmosdbazurekubedbcom-sqlcontainer-editor/README.md index c11e430126..7ee57e7e29 100644 --- a/charts/cosmosdbazurekubedbcom-sqlcontainer-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-sqlcontainer-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-sqlcontainer-editor --version=v0.38.0 -$ helm upgrade -i cosmosdbazurekubedbcom-sqlcontainer-editor appscode/cosmosdbazurekubedbcom-sqlcontainer-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-sqlcontainer-editor --version=v0.39.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlcontainer-editor appscode/cosmosdbazurekubedbcom-sqlcontainer-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SQLContainer Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-sqlcontainer-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlcontainer-editor appscode/cosmosdbazurekubedbcom-sqlcontainer-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlcontainer-editor appscode/cosmosdbazurekubedbcom-sqlcontainer-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SQLContainer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlcontainer-editor appscode/cosmosdbazurekubedbcom-sqlcontainer-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlcontainer-editor appscode/cosmosdbazurekubedbcom-sqlcontainer-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlcontainer-editor appscode/cosmosdbazurekubedbcom-sqlcontainer-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-sqlcontainer-editor appscode/cosmosdbazurekubedbcom-sqlcontainer-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-sqldatabase-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-sqldatabase-editor/Chart.yaml index 68793dc9c7..1e0ea8cdfc 100644 --- a/charts/cosmosdbazurekubedbcom-sqldatabase-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-sqldatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"sqldatabases"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SQLDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-sqldatabase-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cosmosdbazurekubedbcom-sqldatabase-editor/README.md b/charts/cosmosdbazurekubedbcom-sqldatabase-editor/README.md index 9ac3918f43..65f7fb1d2a 100644 --- a/charts/cosmosdbazurekubedbcom-sqldatabase-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-sqldatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-sqldatabase-editor --version=v0.38.0 -$ helm upgrade -i cosmosdbazurekubedbcom-sqldatabase-editor appscode/cosmosdbazurekubedbcom-sqldatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-sqldatabase-editor --version=v0.39.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqldatabase-editor appscode/cosmosdbazurekubedbcom-sqldatabase-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SQLDatabase Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-sqldatabase-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqldatabase-editor appscode/cosmosdbazurekubedbcom-sqldatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqldatabase-editor appscode/cosmosdbazurekubedbcom-sqldatabase-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SQLDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqldatabase-editor appscode/cosmosdbazurekubedbcom-sqldatabase-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-sqldatabase-editor appscode/cosmosdbazurekubedbcom-sqldatabase-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqldatabase-editor appscode/cosmosdbazurekubedbcom-sqldatabase-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-sqldatabase-editor appscode/cosmosdbazurekubedbcom-sqldatabase-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-sqldedicatedgateway-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-sqldedicatedgateway-editor/Chart.yaml index 7ef59a96bd..b7df3c028d 100644 --- a/charts/cosmosdbazurekubedbcom-sqldedicatedgateway-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-sqldedicatedgateway-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"sqldedicatedgateways"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SQLDedicatedGateway Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-sqldedicatedgateway-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cosmosdbazurekubedbcom-sqldedicatedgateway-editor/README.md b/charts/cosmosdbazurekubedbcom-sqldedicatedgateway-editor/README.md index a791f6b9cc..080d8bb078 100644 --- a/charts/cosmosdbazurekubedbcom-sqldedicatedgateway-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-sqldedicatedgateway-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-sqldedicatedgateway-editor --version=v0.38.0 -$ helm upgrade -i cosmosdbazurekubedbcom-sqldedicatedgateway-editor appscode/cosmosdbazurekubedbcom-sqldedicatedgateway-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-sqldedicatedgateway-editor --version=v0.39.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqldedicatedgateway-editor appscode/cosmosdbazurekubedbcom-sqldedicatedgateway-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SQLDedicatedGateway Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-sqldedicatedgateway-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqldedicatedgateway-editor appscode/cosmosdbazurekubedbcom-sqldedicatedgateway-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqldedicatedgateway-editor appscode/cosmosdbazurekubedbcom-sqldedicatedgateway-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SQLDedicatedGateway Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqldedicatedgateway-editor appscode/cosmosdbazurekubedbcom-sqldedicatedgateway-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-sqldedicatedgateway-editor appscode/cosmosdbazurekubedbcom-sqldedicatedgateway-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqldedicatedgateway-editor appscode/cosmosdbazurekubedbcom-sqldedicatedgateway-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-sqldedicatedgateway-editor appscode/cosmosdbazurekubedbcom-sqldedicatedgateway-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-sqlfunction-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-sqlfunction-editor/Chart.yaml index f4c61a8ce0..4e0392e123 100644 --- a/charts/cosmosdbazurekubedbcom-sqlfunction-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-sqlfunction-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"sqlfunctions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SQLFunction Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-sqlfunction-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cosmosdbazurekubedbcom-sqlfunction-editor/README.md b/charts/cosmosdbazurekubedbcom-sqlfunction-editor/README.md index 7fe44aeec6..9331b8cb6a 100644 --- a/charts/cosmosdbazurekubedbcom-sqlfunction-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-sqlfunction-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-sqlfunction-editor --version=v0.38.0 -$ helm upgrade -i cosmosdbazurekubedbcom-sqlfunction-editor appscode/cosmosdbazurekubedbcom-sqlfunction-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-sqlfunction-editor --version=v0.39.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlfunction-editor appscode/cosmosdbazurekubedbcom-sqlfunction-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SQLFunction Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-sqlfunction-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlfunction-editor appscode/cosmosdbazurekubedbcom-sqlfunction-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlfunction-editor appscode/cosmosdbazurekubedbcom-sqlfunction-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SQLFunction Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlfunction-editor appscode/cosmosdbazurekubedbcom-sqlfunction-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlfunction-editor appscode/cosmosdbazurekubedbcom-sqlfunction-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlfunction-editor appscode/cosmosdbazurekubedbcom-sqlfunction-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-sqlfunction-editor appscode/cosmosdbazurekubedbcom-sqlfunction-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-sqlroleassignment-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-sqlroleassignment-editor/Chart.yaml index f9a70a90ce..2241b3df3d 100644 --- a/charts/cosmosdbazurekubedbcom-sqlroleassignment-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-sqlroleassignment-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"sqlroleassignments"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SQLRoleAssignment Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-sqlroleassignment-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cosmosdbazurekubedbcom-sqlroleassignment-editor/README.md b/charts/cosmosdbazurekubedbcom-sqlroleassignment-editor/README.md index 2eb7c1cecf..be505dc54e 100644 --- a/charts/cosmosdbazurekubedbcom-sqlroleassignment-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-sqlroleassignment-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-sqlroleassignment-editor --version=v0.38.0 -$ helm upgrade -i cosmosdbazurekubedbcom-sqlroleassignment-editor appscode/cosmosdbazurekubedbcom-sqlroleassignment-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-sqlroleassignment-editor --version=v0.39.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlroleassignment-editor appscode/cosmosdbazurekubedbcom-sqlroleassignment-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SQLRoleAssignment Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-sqlroleassignment-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlroleassignment-editor appscode/cosmosdbazurekubedbcom-sqlroleassignment-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlroleassignment-editor appscode/cosmosdbazurekubedbcom-sqlroleassignment-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SQLRoleAssignment Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlroleassignment-editor appscode/cosmosdbazurekubedbcom-sqlroleassignment-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlroleassignment-editor appscode/cosmosdbazurekubedbcom-sqlroleassignment-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlroleassignment-editor appscode/cosmosdbazurekubedbcom-sqlroleassignment-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-sqlroleassignment-editor appscode/cosmosdbazurekubedbcom-sqlroleassignment-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-sqlroledefinition-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-sqlroledefinition-editor/Chart.yaml index 12ce17e940..d455d61144 100644 --- a/charts/cosmosdbazurekubedbcom-sqlroledefinition-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-sqlroledefinition-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"sqlroledefinitions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SQLRoleDefinition Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-sqlroledefinition-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cosmosdbazurekubedbcom-sqlroledefinition-editor/README.md b/charts/cosmosdbazurekubedbcom-sqlroledefinition-editor/README.md index 8b4375d101..5abe9ca6eb 100644 --- a/charts/cosmosdbazurekubedbcom-sqlroledefinition-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-sqlroledefinition-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-sqlroledefinition-editor --version=v0.38.0 -$ helm upgrade -i cosmosdbazurekubedbcom-sqlroledefinition-editor appscode/cosmosdbazurekubedbcom-sqlroledefinition-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-sqlroledefinition-editor --version=v0.39.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlroledefinition-editor appscode/cosmosdbazurekubedbcom-sqlroledefinition-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SQLRoleDefinition Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-sqlroledefinition-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlroledefinition-editor appscode/cosmosdbazurekubedbcom-sqlroledefinition-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlroledefinition-editor appscode/cosmosdbazurekubedbcom-sqlroledefinition-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SQLRoleDefinition Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlroledefinition-editor appscode/cosmosdbazurekubedbcom-sqlroledefinition-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlroledefinition-editor appscode/cosmosdbazurekubedbcom-sqlroledefinition-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlroledefinition-editor appscode/cosmosdbazurekubedbcom-sqlroledefinition-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-sqlroledefinition-editor appscode/cosmosdbazurekubedbcom-sqlroledefinition-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-sqlstoredprocedure-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-sqlstoredprocedure-editor/Chart.yaml index 3df6a5c3a2..0426bcc15a 100644 --- a/charts/cosmosdbazurekubedbcom-sqlstoredprocedure-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-sqlstoredprocedure-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"sqlstoredprocedures"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SQLStoredProcedure Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-sqlstoredprocedure-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cosmosdbazurekubedbcom-sqlstoredprocedure-editor/README.md b/charts/cosmosdbazurekubedbcom-sqlstoredprocedure-editor/README.md index 06d9a73996..1798c5c8cc 100644 --- a/charts/cosmosdbazurekubedbcom-sqlstoredprocedure-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-sqlstoredprocedure-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-sqlstoredprocedure-editor --version=v0.38.0 -$ helm upgrade -i cosmosdbazurekubedbcom-sqlstoredprocedure-editor appscode/cosmosdbazurekubedbcom-sqlstoredprocedure-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-sqlstoredprocedure-editor --version=v0.39.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlstoredprocedure-editor appscode/cosmosdbazurekubedbcom-sqlstoredprocedure-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SQLStoredProcedure Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-sqlstoredprocedure-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlstoredprocedure-editor appscode/cosmosdbazurekubedbcom-sqlstoredprocedure-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlstoredprocedure-editor appscode/cosmosdbazurekubedbcom-sqlstoredprocedure-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SQLStoredProcedure Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlstoredprocedure-editor appscode/cosmosdbazurekubedbcom-sqlstoredprocedure-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlstoredprocedure-editor appscode/cosmosdbazurekubedbcom-sqlstoredprocedure-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlstoredprocedure-editor appscode/cosmosdbazurekubedbcom-sqlstoredprocedure-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-sqlstoredprocedure-editor appscode/cosmosdbazurekubedbcom-sqlstoredprocedure-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-sqltrigger-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-sqltrigger-editor/Chart.yaml index 450d4e5a5f..0ed37c21c4 100644 --- a/charts/cosmosdbazurekubedbcom-sqltrigger-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-sqltrigger-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"sqltriggers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SQLTrigger Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-sqltrigger-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cosmosdbazurekubedbcom-sqltrigger-editor/README.md b/charts/cosmosdbazurekubedbcom-sqltrigger-editor/README.md index 58fd3fa81d..9419cddf6d 100644 --- a/charts/cosmosdbazurekubedbcom-sqltrigger-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-sqltrigger-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-sqltrigger-editor --version=v0.38.0 -$ helm upgrade -i cosmosdbazurekubedbcom-sqltrigger-editor appscode/cosmosdbazurekubedbcom-sqltrigger-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-sqltrigger-editor --version=v0.39.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqltrigger-editor appscode/cosmosdbazurekubedbcom-sqltrigger-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SQLTrigger Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-sqltrigger-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqltrigger-editor appscode/cosmosdbazurekubedbcom-sqltrigger-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqltrigger-editor appscode/cosmosdbazurekubedbcom-sqltrigger-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SQLTrigger Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqltrigger-editor appscode/cosmosdbazurekubedbcom-sqltrigger-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-sqltrigger-editor appscode/cosmosdbazurekubedbcom-sqltrigger-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqltrigger-editor appscode/cosmosdbazurekubedbcom-sqltrigger-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-sqltrigger-editor appscode/cosmosdbazurekubedbcom-sqltrigger-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-table-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-table-editor/Chart.yaml index 1b8bb7da10..f0a899f5c7 100644 --- a/charts/cosmosdbazurekubedbcom-table-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-table-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"tables"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Table Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-table-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/cosmosdbazurekubedbcom-table-editor/README.md b/charts/cosmosdbazurekubedbcom-table-editor/README.md index 5169dcbce6..4652923dd6 100644 --- a/charts/cosmosdbazurekubedbcom-table-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-table-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-table-editor --version=v0.38.0 -$ helm upgrade -i cosmosdbazurekubedbcom-table-editor appscode/cosmosdbazurekubedbcom-table-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-table-editor --version=v0.39.0 +$ helm upgrade -i cosmosdbazurekubedbcom-table-editor appscode/cosmosdbazurekubedbcom-table-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Table Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-table-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-table-editor appscode/cosmosdbazurekubedbcom-table-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i cosmosdbazurekubedbcom-table-editor appscode/cosmosdbazurekubedbcom-table-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Table Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-table-editor appscode/cosmosdbazurekubedbcom-table-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-table-editor appscode/cosmosdbazurekubedbcom-table-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-table-editor appscode/cosmosdbazurekubedbcom-table-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-table-editor appscode/cosmosdbazurekubedbcom-table-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/courierkubedbcom-branch-editor/Chart.yaml b/charts/courierkubedbcom-branch-editor/Chart.yaml index b41a7046f5..9d59e6a171 100644 --- a/charts/courierkubedbcom-branch-editor/Chart.yaml +++ b/charts/courierkubedbcom-branch-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"courier.kubedb.com","version":"v1alpha1","resource":"branches"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Branch Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: courierkubedbcom-branch-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/courierkubedbcom-branch-editor/README.md b/charts/courierkubedbcom-branch-editor/README.md index 0b2229a9c6..c924eebfc3 100644 --- a/charts/courierkubedbcom-branch-editor/README.md +++ b/charts/courierkubedbcom-branch-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/courierkubedbcom-branch-editor --version=v0.38.0 -$ helm upgrade -i courierkubedbcom-branch-editor appscode/courierkubedbcom-branch-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/courierkubedbcom-branch-editor --version=v0.39.0 +$ helm upgrade -i courierkubedbcom-branch-editor appscode/courierkubedbcom-branch-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Branch Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `courierkubedbcom-branch-editor`: ```bash -$ helm upgrade -i courierkubedbcom-branch-editor appscode/courierkubedbcom-branch-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i courierkubedbcom-branch-editor appscode/courierkubedbcom-branch-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Branch Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `courierkubedbcom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i courierkubedbcom-branch-editor appscode/courierkubedbcom-branch-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=courier.kubedb.com/v1alpha1 +$ helm upgrade -i courierkubedbcom-branch-editor appscode/courierkubedbcom-branch-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=courier.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i courierkubedbcom-branch-editor appscode/courierkubedbcom-branch-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i courierkubedbcom-branch-editor appscode/courierkubedbcom-branch-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/courierkubedbcom-branchwork-editor/Chart.yaml b/charts/courierkubedbcom-branchwork-editor/Chart.yaml index 62855465ee..55b54668fd 100644 --- a/charts/courierkubedbcom-branchwork-editor/Chart.yaml +++ b/charts/courierkubedbcom-branchwork-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"courier.kubedb.com","version":"v1alpha1","resource":"branchworks"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: BranchWork Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: courierkubedbcom-branchwork-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/courierkubedbcom-branchwork-editor/README.md b/charts/courierkubedbcom-branchwork-editor/README.md index 484a760590..e6b836dbbd 100644 --- a/charts/courierkubedbcom-branchwork-editor/README.md +++ b/charts/courierkubedbcom-branchwork-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/courierkubedbcom-branchwork-editor --version=v0.38.0 -$ helm upgrade -i courierkubedbcom-branchwork-editor appscode/courierkubedbcom-branchwork-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/courierkubedbcom-branchwork-editor --version=v0.39.0 +$ helm upgrade -i courierkubedbcom-branchwork-editor appscode/courierkubedbcom-branchwork-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BranchWork Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `courierkubedbcom-branchwork-editor`: ```bash -$ helm upgrade -i courierkubedbcom-branchwork-editor appscode/courierkubedbcom-branchwork-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i courierkubedbcom-branchwork-editor appscode/courierkubedbcom-branchwork-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a BranchWork Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `courierkubedbcom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i courierkubedbcom-branchwork-editor appscode/courierkubedbcom-branchwork-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=courier.kubedb.com/v1alpha1 +$ helm upgrade -i courierkubedbcom-branchwork-editor appscode/courierkubedbcom-branchwork-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=courier.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i courierkubedbcom-branchwork-editor appscode/courierkubedbcom-branchwork-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i courierkubedbcom-branchwork-editor appscode/courierkubedbcom-branchwork-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/courierkubedbcom-mariadbmigration-editor/Chart.yaml b/charts/courierkubedbcom-mariadbmigration-editor/Chart.yaml index 5abf1018fe..88d5e7ab36 100644 --- a/charts/courierkubedbcom-mariadbmigration-editor/Chart.yaml +++ b/charts/courierkubedbcom-mariadbmigration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"courier.kubedb.com","version":"v1alpha1","resource":"mariadbmigrations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MariaDBMigration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: courierkubedbcom-mariadbmigration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/courierkubedbcom-mariadbmigration-editor/README.md b/charts/courierkubedbcom-mariadbmigration-editor/README.md index b5ed8ee30a..6e8f19e678 100644 --- a/charts/courierkubedbcom-mariadbmigration-editor/README.md +++ b/charts/courierkubedbcom-mariadbmigration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/courierkubedbcom-mariadbmigration-editor --version=v0.38.0 -$ helm upgrade -i courierkubedbcom-mariadbmigration-editor appscode/courierkubedbcom-mariadbmigration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/courierkubedbcom-mariadbmigration-editor --version=v0.39.0 +$ helm upgrade -i courierkubedbcom-mariadbmigration-editor appscode/courierkubedbcom-mariadbmigration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBMigration Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `courierkubedbcom-mariadbmigration-editor`: ```bash -$ helm upgrade -i courierkubedbcom-mariadbmigration-editor appscode/courierkubedbcom-mariadbmigration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i courierkubedbcom-mariadbmigration-editor appscode/courierkubedbcom-mariadbmigration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MariaDBMigration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `courierkubedbcom-m Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i courierkubedbcom-mariadbmigration-editor appscode/courierkubedbcom-mariadbmigration-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=courier.kubedb.com/v1alpha1 +$ helm upgrade -i courierkubedbcom-mariadbmigration-editor appscode/courierkubedbcom-mariadbmigration-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=courier.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i courierkubedbcom-mariadbmigration-editor appscode/courierkubedbcom-mariadbmigration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i courierkubedbcom-mariadbmigration-editor appscode/courierkubedbcom-mariadbmigration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/courierkubedbcom-mongodbmigration-editor/Chart.yaml b/charts/courierkubedbcom-mongodbmigration-editor/Chart.yaml index 8730289471..15898ab184 100644 --- a/charts/courierkubedbcom-mongodbmigration-editor/Chart.yaml +++ b/charts/courierkubedbcom-mongodbmigration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"courier.kubedb.com","version":"v1alpha1","resource":"mongodbmigrations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MongoDBMigration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: courierkubedbcom-mongodbmigration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/courierkubedbcom-mongodbmigration-editor/README.md b/charts/courierkubedbcom-mongodbmigration-editor/README.md index f55ea62731..1495e705f1 100644 --- a/charts/courierkubedbcom-mongodbmigration-editor/README.md +++ b/charts/courierkubedbcom-mongodbmigration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/courierkubedbcom-mongodbmigration-editor --version=v0.38.0 -$ helm upgrade -i courierkubedbcom-mongodbmigration-editor appscode/courierkubedbcom-mongodbmigration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/courierkubedbcom-mongodbmigration-editor --version=v0.39.0 +$ helm upgrade -i courierkubedbcom-mongodbmigration-editor appscode/courierkubedbcom-mongodbmigration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBMigration Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `courierkubedbcom-mongodbmigration-editor`: ```bash -$ helm upgrade -i courierkubedbcom-mongodbmigration-editor appscode/courierkubedbcom-mongodbmigration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i courierkubedbcom-mongodbmigration-editor appscode/courierkubedbcom-mongodbmigration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MongoDBMigration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `courierkubedbcom-m Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i courierkubedbcom-mongodbmigration-editor appscode/courierkubedbcom-mongodbmigration-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=courier.kubedb.com/v1alpha1 +$ helm upgrade -i courierkubedbcom-mongodbmigration-editor appscode/courierkubedbcom-mongodbmigration-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=courier.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i courierkubedbcom-mongodbmigration-editor appscode/courierkubedbcom-mongodbmigration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i courierkubedbcom-mongodbmigration-editor appscode/courierkubedbcom-mongodbmigration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/courierkubedbcom-mssqlservermigration-editor/Chart.yaml b/charts/courierkubedbcom-mssqlservermigration-editor/Chart.yaml index 3c42e64310..eaf33f9847 100644 --- a/charts/courierkubedbcom-mssqlservermigration-editor/Chart.yaml +++ b/charts/courierkubedbcom-mssqlservermigration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"courier.kubedb.com","version":"v1alpha1","resource":"mssqlservermigrations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLServerMigration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: courierkubedbcom-mssqlservermigration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/courierkubedbcom-mssqlservermigration-editor/README.md b/charts/courierkubedbcom-mssqlservermigration-editor/README.md index a1c04c4802..7457449342 100644 --- a/charts/courierkubedbcom-mssqlservermigration-editor/README.md +++ b/charts/courierkubedbcom-mssqlservermigration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/courierkubedbcom-mssqlservermigration-editor --version=v0.38.0 -$ helm upgrade -i courierkubedbcom-mssqlservermigration-editor appscode/courierkubedbcom-mssqlservermigration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/courierkubedbcom-mssqlservermigration-editor --version=v0.39.0 +$ helm upgrade -i courierkubedbcom-mssqlservermigration-editor appscode/courierkubedbcom-mssqlservermigration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerMigration Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `courierkubedbcom-mssqlservermigration-editor`: ```bash -$ helm upgrade -i courierkubedbcom-mssqlservermigration-editor appscode/courierkubedbcom-mssqlservermigration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i courierkubedbcom-mssqlservermigration-editor appscode/courierkubedbcom-mssqlservermigration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLServerMigration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `courierkubedbcom-m Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i courierkubedbcom-mssqlservermigration-editor appscode/courierkubedbcom-mssqlservermigration-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=courier.kubedb.com/v1alpha1 +$ helm upgrade -i courierkubedbcom-mssqlservermigration-editor appscode/courierkubedbcom-mssqlservermigration-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=courier.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i courierkubedbcom-mssqlservermigration-editor appscode/courierkubedbcom-mssqlservermigration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i courierkubedbcom-mssqlservermigration-editor appscode/courierkubedbcom-mssqlservermigration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/courierkubedbcom-mysqlmigration-editor/Chart.yaml b/charts/courierkubedbcom-mysqlmigration-editor/Chart.yaml index a21d9c8b84..e452cb1672 100644 --- a/charts/courierkubedbcom-mysqlmigration-editor/Chart.yaml +++ b/charts/courierkubedbcom-mysqlmigration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"courier.kubedb.com","version":"v1alpha1","resource":"mysqlmigrations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MySQLMigration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: courierkubedbcom-mysqlmigration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/courierkubedbcom-mysqlmigration-editor/README.md b/charts/courierkubedbcom-mysqlmigration-editor/README.md index 95238e98ea..ca66325b5c 100644 --- a/charts/courierkubedbcom-mysqlmigration-editor/README.md +++ b/charts/courierkubedbcom-mysqlmigration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/courierkubedbcom-mysqlmigration-editor --version=v0.38.0 -$ helm upgrade -i courierkubedbcom-mysqlmigration-editor appscode/courierkubedbcom-mysqlmigration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/courierkubedbcom-mysqlmigration-editor --version=v0.39.0 +$ helm upgrade -i courierkubedbcom-mysqlmigration-editor appscode/courierkubedbcom-mysqlmigration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLMigration Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `courierkubedbcom-mysqlmigration-editor`: ```bash -$ helm upgrade -i courierkubedbcom-mysqlmigration-editor appscode/courierkubedbcom-mysqlmigration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i courierkubedbcom-mysqlmigration-editor appscode/courierkubedbcom-mysqlmigration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MySQLMigration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `courierkubedbcom-m Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i courierkubedbcom-mysqlmigration-editor appscode/courierkubedbcom-mysqlmigration-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=courier.kubedb.com/v1alpha1 +$ helm upgrade -i courierkubedbcom-mysqlmigration-editor appscode/courierkubedbcom-mysqlmigration-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=courier.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i courierkubedbcom-mysqlmigration-editor appscode/courierkubedbcom-mysqlmigration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i courierkubedbcom-mysqlmigration-editor appscode/courierkubedbcom-mysqlmigration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/courierkubedbcom-postgresmigration-editor/Chart.yaml b/charts/courierkubedbcom-postgresmigration-editor/Chart.yaml index 1d2b8a0444..ae61c50278 100644 --- a/charts/courierkubedbcom-postgresmigration-editor/Chart.yaml +++ b/charts/courierkubedbcom-postgresmigration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"courier.kubedb.com","version":"v1alpha1","resource":"postgresmigrations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PostgresMigration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: courierkubedbcom-postgresmigration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/courierkubedbcom-postgresmigration-editor/README.md b/charts/courierkubedbcom-postgresmigration-editor/README.md index d18e3646a8..f2d6fc4886 100644 --- a/charts/courierkubedbcom-postgresmigration-editor/README.md +++ b/charts/courierkubedbcom-postgresmigration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/courierkubedbcom-postgresmigration-editor --version=v0.38.0 -$ helm upgrade -i courierkubedbcom-postgresmigration-editor appscode/courierkubedbcom-postgresmigration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/courierkubedbcom-postgresmigration-editor --version=v0.39.0 +$ helm upgrade -i courierkubedbcom-postgresmigration-editor appscode/courierkubedbcom-postgresmigration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresMigration Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `courierkubedbcom-postgresmigration-editor`: ```bash -$ helm upgrade -i courierkubedbcom-postgresmigration-editor appscode/courierkubedbcom-postgresmigration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i courierkubedbcom-postgresmigration-editor appscode/courierkubedbcom-postgresmigration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PostgresMigration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `courierkubedbcom-p Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i courierkubedbcom-postgresmigration-editor appscode/courierkubedbcom-postgresmigration-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=courier.kubedb.com/v1alpha1 +$ helm upgrade -i courierkubedbcom-postgresmigration-editor appscode/courierkubedbcom-postgresmigration-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=courier.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i courierkubedbcom-postgresmigration-editor appscode/courierkubedbcom-postgresmigration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i courierkubedbcom-postgresmigration-editor appscode/courierkubedbcom-postgresmigration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbformariadbazurekubedbcom-configuration-editor/Chart.yaml b/charts/dbformariadbazurekubedbcom-configuration-editor/Chart.yaml index 249bf0f8ab..99b0adf2c9 100644 --- a/charts/dbformariadbazurekubedbcom-configuration-editor/Chart.yaml +++ b/charts/dbformariadbazurekubedbcom-configuration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformariadb.azure.kubedb.com","version":"v1alpha1","resource":"configurations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Configuration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformariadbazurekubedbcom-configuration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbformariadbazurekubedbcom-configuration-editor/README.md b/charts/dbformariadbazurekubedbcom-configuration-editor/README.md index 1982ff543c..d7e1aed6f5 100644 --- a/charts/dbformariadbazurekubedbcom-configuration-editor/README.md +++ b/charts/dbformariadbazurekubedbcom-configuration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformariadbazurekubedbcom-configuration-editor --version=v0.38.0 -$ helm upgrade -i dbformariadbazurekubedbcom-configuration-editor appscode/dbformariadbazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbformariadbazurekubedbcom-configuration-editor --version=v0.39.0 +$ helm upgrade -i dbformariadbazurekubedbcom-configuration-editor appscode/dbformariadbazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Configuration Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `dbformariadbazurekubedbcom-configuration-editor`: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-configuration-editor appscode/dbformariadbazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbformariadbazurekubedbcom-configuration-editor appscode/dbformariadbazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Configuration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformariadbazurek Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-configuration-editor appscode/dbformariadbazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbformariadb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformariadbazurekubedbcom-configuration-editor appscode/dbformariadbazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbformariadb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-configuration-editor appscode/dbformariadbazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbformariadbazurekubedbcom-configuration-editor appscode/dbformariadbazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbformariadbazurekubedbcom-database-editor/Chart.yaml b/charts/dbformariadbazurekubedbcom-database-editor/Chart.yaml index cd0dc2ff0b..237839df9a 100644 --- a/charts/dbformariadbazurekubedbcom-database-editor/Chart.yaml +++ b/charts/dbformariadbazurekubedbcom-database-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformariadb.azure.kubedb.com","version":"v1alpha1","resource":"databases"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Database Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformariadbazurekubedbcom-database-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbformariadbazurekubedbcom-database-editor/README.md b/charts/dbformariadbazurekubedbcom-database-editor/README.md index 11e5516a92..bc95d31245 100644 --- a/charts/dbformariadbazurekubedbcom-database-editor/README.md +++ b/charts/dbformariadbazurekubedbcom-database-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformariadbazurekubedbcom-database-editor --version=v0.38.0 -$ helm upgrade -i dbformariadbazurekubedbcom-database-editor appscode/dbformariadbazurekubedbcom-database-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbformariadbazurekubedbcom-database-editor --version=v0.39.0 +$ helm upgrade -i dbformariadbazurekubedbcom-database-editor appscode/dbformariadbazurekubedbcom-database-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Database Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `dbformariadbazurekubedbcom-database-editor`: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-database-editor appscode/dbformariadbazurekubedbcom-database-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbformariadbazurekubedbcom-database-editor appscode/dbformariadbazurekubedbcom-database-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Database Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformariadbazurek Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-database-editor appscode/dbformariadbazurekubedbcom-database-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbformariadb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformariadbazurekubedbcom-database-editor appscode/dbformariadbazurekubedbcom-database-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbformariadb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-database-editor appscode/dbformariadbazurekubedbcom-database-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbformariadbazurekubedbcom-database-editor appscode/dbformariadbazurekubedbcom-database-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbformariadbazurekubedbcom-firewallrule-editor/Chart.yaml b/charts/dbformariadbazurekubedbcom-firewallrule-editor/Chart.yaml index 9673de9109..f69856fecc 100644 --- a/charts/dbformariadbazurekubedbcom-firewallrule-editor/Chart.yaml +++ b/charts/dbformariadbazurekubedbcom-firewallrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformariadb.azure.kubedb.com","version":"v1alpha1","resource":"firewallrules"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FirewallRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformariadbazurekubedbcom-firewallrule-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbformariadbazurekubedbcom-firewallrule-editor/README.md b/charts/dbformariadbazurekubedbcom-firewallrule-editor/README.md index ec7b8b59d0..66c5888afe 100644 --- a/charts/dbformariadbazurekubedbcom-firewallrule-editor/README.md +++ b/charts/dbformariadbazurekubedbcom-firewallrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformariadbazurekubedbcom-firewallrule-editor --version=v0.38.0 -$ helm upgrade -i dbformariadbazurekubedbcom-firewallrule-editor appscode/dbformariadbazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbformariadbazurekubedbcom-firewallrule-editor --version=v0.39.0 +$ helm upgrade -i dbformariadbazurekubedbcom-firewallrule-editor appscode/dbformariadbazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FirewallRule Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `dbformariadbazurekubedbcom-firewallrule-editor`: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-firewallrule-editor appscode/dbformariadbazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbformariadbazurekubedbcom-firewallrule-editor appscode/dbformariadbazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FirewallRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformariadbazurek Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-firewallrule-editor appscode/dbformariadbazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbformariadb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformariadbazurekubedbcom-firewallrule-editor appscode/dbformariadbazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbformariadb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-firewallrule-editor appscode/dbformariadbazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbformariadbazurekubedbcom-firewallrule-editor appscode/dbformariadbazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbformariadbazurekubedbcom-server-editor/Chart.yaml b/charts/dbformariadbazurekubedbcom-server-editor/Chart.yaml index b8d0f3b474..1a014b028d 100644 --- a/charts/dbformariadbazurekubedbcom-server-editor/Chart.yaml +++ b/charts/dbformariadbazurekubedbcom-server-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformariadb.azure.kubedb.com","version":"v1alpha1","resource":"servers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Server Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformariadbazurekubedbcom-server-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbformariadbazurekubedbcom-server-editor/README.md b/charts/dbformariadbazurekubedbcom-server-editor/README.md index 0e4acf7d0b..0ef278fc43 100644 --- a/charts/dbformariadbazurekubedbcom-server-editor/README.md +++ b/charts/dbformariadbazurekubedbcom-server-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformariadbazurekubedbcom-server-editor --version=v0.38.0 -$ helm upgrade -i dbformariadbazurekubedbcom-server-editor appscode/dbformariadbazurekubedbcom-server-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbformariadbazurekubedbcom-server-editor --version=v0.39.0 +$ helm upgrade -i dbformariadbazurekubedbcom-server-editor appscode/dbformariadbazurekubedbcom-server-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Server Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `dbformariadbazurekubedbcom-server-editor`: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-server-editor appscode/dbformariadbazurekubedbcom-server-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbformariadbazurekubedbcom-server-editor appscode/dbformariadbazurekubedbcom-server-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Server Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformariadbazurek Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-server-editor appscode/dbformariadbazurekubedbcom-server-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbformariadb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformariadbazurekubedbcom-server-editor appscode/dbformariadbazurekubedbcom-server-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbformariadb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-server-editor appscode/dbformariadbazurekubedbcom-server-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbformariadbazurekubedbcom-server-editor appscode/dbformariadbazurekubedbcom-server-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbformariadbazurekubedbcom-virtualnetworkrule-editor/Chart.yaml b/charts/dbformariadbazurekubedbcom-virtualnetworkrule-editor/Chart.yaml index a608d416fe..496a7fbbc0 100644 --- a/charts/dbformariadbazurekubedbcom-virtualnetworkrule-editor/Chart.yaml +++ b/charts/dbformariadbazurekubedbcom-virtualnetworkrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformariadb.azure.kubedb.com","version":"v1alpha1","resource":"virtualnetworkrules"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: VirtualNetworkRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformariadbazurekubedbcom-virtualnetworkrule-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbformariadbazurekubedbcom-virtualnetworkrule-editor/README.md b/charts/dbformariadbazurekubedbcom-virtualnetworkrule-editor/README.md index 8ba05e08ce..2753d3c36e 100644 --- a/charts/dbformariadbazurekubedbcom-virtualnetworkrule-editor/README.md +++ b/charts/dbformariadbazurekubedbcom-virtualnetworkrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformariadbazurekubedbcom-virtualnetworkrule-editor --version=v0.38.0 -$ helm upgrade -i dbformariadbazurekubedbcom-virtualnetworkrule-editor appscode/dbformariadbazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbformariadbazurekubedbcom-virtualnetworkrule-editor --version=v0.39.0 +$ helm upgrade -i dbformariadbazurekubedbcom-virtualnetworkrule-editor appscode/dbformariadbazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VirtualNetworkRule Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `dbformariadbazurekubedbcom-virtualnetworkrule-editor`: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-virtualnetworkrule-editor appscode/dbformariadbazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbformariadbazurekubedbcom-virtualnetworkrule-editor appscode/dbformariadbazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a VirtualNetworkRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformariadbazurek Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-virtualnetworkrule-editor appscode/dbformariadbazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbformariadb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformariadbazurekubedbcom-virtualnetworkrule-editor appscode/dbformariadbazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbformariadb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-virtualnetworkrule-editor appscode/dbformariadbazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbformariadbazurekubedbcom-virtualnetworkrule-editor appscode/dbformariadbazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbformysqlazurekubedbcom-activedirectoryadministrator-editor/Chart.yaml b/charts/dbformysqlazurekubedbcom-activedirectoryadministrator-editor/Chart.yaml index 83aa3920b9..029d1cd975 100644 --- a/charts/dbformysqlazurekubedbcom-activedirectoryadministrator-editor/Chart.yaml +++ b/charts/dbformysqlazurekubedbcom-activedirectoryadministrator-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformysql.azure.kubedb.com","version":"v1alpha1","resource":"activedirectoryadministrators"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ActiveDirectoryAdministrator Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformysqlazurekubedbcom-activedirectoryadministrator-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbformysqlazurekubedbcom-activedirectoryadministrator-editor/README.md b/charts/dbformysqlazurekubedbcom-activedirectoryadministrator-editor/README.md index bb37969378..a6950e969f 100644 --- a/charts/dbformysqlazurekubedbcom-activedirectoryadministrator-editor/README.md +++ b/charts/dbformysqlazurekubedbcom-activedirectoryadministrator-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformysqlazurekubedbcom-activedirectoryadministrator-editor --version=v0.38.0 -$ helm upgrade -i dbformysqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbformysqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbformysqlazurekubedbcom-activedirectoryadministrator-editor --version=v0.39.0 +$ helm upgrade -i dbformysqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbformysqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ActiveDirectoryAdministrator Editor on a [Kubernetes](http: To install/upgrade the chart with the release name `dbformysqlazurekubedbcom-activedirectoryadministrator-editor`: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbformysqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbformysqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbformysqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ActiveDirectoryAdministrator Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformysqlazurekub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbformysqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformysqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbformysqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbformysqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbformysqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbformysqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbformysqlazurekubedbcom-configuration-editor/Chart.yaml b/charts/dbformysqlazurekubedbcom-configuration-editor/Chart.yaml index 69a24da7cc..4ef548aaf9 100644 --- a/charts/dbformysqlazurekubedbcom-configuration-editor/Chart.yaml +++ b/charts/dbformysqlazurekubedbcom-configuration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformysql.azure.kubedb.com","version":"v1alpha1","resource":"configurations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Configuration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformysqlazurekubedbcom-configuration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbformysqlazurekubedbcom-configuration-editor/README.md b/charts/dbformysqlazurekubedbcom-configuration-editor/README.md index e31679be90..d4d0f1bce3 100644 --- a/charts/dbformysqlazurekubedbcom-configuration-editor/README.md +++ b/charts/dbformysqlazurekubedbcom-configuration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformysqlazurekubedbcom-configuration-editor --version=v0.38.0 -$ helm upgrade -i dbformysqlazurekubedbcom-configuration-editor appscode/dbformysqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbformysqlazurekubedbcom-configuration-editor --version=v0.39.0 +$ helm upgrade -i dbformysqlazurekubedbcom-configuration-editor appscode/dbformysqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Configuration Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `dbformysqlazurekubedbcom-configuration-editor`: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-configuration-editor appscode/dbformysqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbformysqlazurekubedbcom-configuration-editor appscode/dbformysqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Configuration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformysqlazurekub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-configuration-editor appscode/dbformysqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformysqlazurekubedbcom-configuration-editor appscode/dbformysqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-configuration-editor appscode/dbformysqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbformysqlazurekubedbcom-configuration-editor appscode/dbformysqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbformysqlazurekubedbcom-database-editor/Chart.yaml b/charts/dbformysqlazurekubedbcom-database-editor/Chart.yaml index c931ea46c0..ab05ec44aa 100644 --- a/charts/dbformysqlazurekubedbcom-database-editor/Chart.yaml +++ b/charts/dbformysqlazurekubedbcom-database-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformysql.azure.kubedb.com","version":"v1alpha1","resource":"databases"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Database Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformysqlazurekubedbcom-database-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbformysqlazurekubedbcom-database-editor/README.md b/charts/dbformysqlazurekubedbcom-database-editor/README.md index 7ab03b9d5c..2915fa98fd 100644 --- a/charts/dbformysqlazurekubedbcom-database-editor/README.md +++ b/charts/dbformysqlazurekubedbcom-database-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformysqlazurekubedbcom-database-editor --version=v0.38.0 -$ helm upgrade -i dbformysqlazurekubedbcom-database-editor appscode/dbformysqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbformysqlazurekubedbcom-database-editor --version=v0.39.0 +$ helm upgrade -i dbformysqlazurekubedbcom-database-editor appscode/dbformysqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Database Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `dbformysqlazurekubedbcom-database-editor`: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-database-editor appscode/dbformysqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbformysqlazurekubedbcom-database-editor appscode/dbformysqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Database Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformysqlazurekub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-database-editor appscode/dbformysqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformysqlazurekubedbcom-database-editor appscode/dbformysqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-database-editor appscode/dbformysqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbformysqlazurekubedbcom-database-editor appscode/dbformysqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbformysqlazurekubedbcom-firewallrule-editor/Chart.yaml b/charts/dbformysqlazurekubedbcom-firewallrule-editor/Chart.yaml index 1d7137f9a2..e745d6054d 100644 --- a/charts/dbformysqlazurekubedbcom-firewallrule-editor/Chart.yaml +++ b/charts/dbformysqlazurekubedbcom-firewallrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformysql.azure.kubedb.com","version":"v1alpha1","resource":"firewallrules"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FirewallRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformysqlazurekubedbcom-firewallrule-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbformysqlazurekubedbcom-firewallrule-editor/README.md b/charts/dbformysqlazurekubedbcom-firewallrule-editor/README.md index 78909be63a..086e8dd829 100644 --- a/charts/dbformysqlazurekubedbcom-firewallrule-editor/README.md +++ b/charts/dbformysqlazurekubedbcom-firewallrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformysqlazurekubedbcom-firewallrule-editor --version=v0.38.0 -$ helm upgrade -i dbformysqlazurekubedbcom-firewallrule-editor appscode/dbformysqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbformysqlazurekubedbcom-firewallrule-editor --version=v0.39.0 +$ helm upgrade -i dbformysqlazurekubedbcom-firewallrule-editor appscode/dbformysqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FirewallRule Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `dbformysqlazurekubedbcom-firewallrule-editor`: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-firewallrule-editor appscode/dbformysqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbformysqlazurekubedbcom-firewallrule-editor appscode/dbformysqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FirewallRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformysqlazurekub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-firewallrule-editor appscode/dbformysqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformysqlazurekubedbcom-firewallrule-editor appscode/dbformysqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-firewallrule-editor appscode/dbformysqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbformysqlazurekubedbcom-firewallrule-editor appscode/dbformysqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbformysqlazurekubedbcom-flexibledatabase-editor/Chart.yaml b/charts/dbformysqlazurekubedbcom-flexibledatabase-editor/Chart.yaml index a201f6733a..e0f5b0143c 100644 --- a/charts/dbformysqlazurekubedbcom-flexibledatabase-editor/Chart.yaml +++ b/charts/dbformysqlazurekubedbcom-flexibledatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformysql.azure.kubedb.com","version":"v1alpha1","resource":"flexibledatabases"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FlexibleDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformysqlazurekubedbcom-flexibledatabase-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbformysqlazurekubedbcom-flexibledatabase-editor/README.md b/charts/dbformysqlazurekubedbcom-flexibledatabase-editor/README.md index 9819bd9401..01ecbf75a2 100644 --- a/charts/dbformysqlazurekubedbcom-flexibledatabase-editor/README.md +++ b/charts/dbformysqlazurekubedbcom-flexibledatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformysqlazurekubedbcom-flexibledatabase-editor --version=v0.38.0 -$ helm upgrade -i dbformysqlazurekubedbcom-flexibledatabase-editor appscode/dbformysqlazurekubedbcom-flexibledatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbformysqlazurekubedbcom-flexibledatabase-editor --version=v0.39.0 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibledatabase-editor appscode/dbformysqlazurekubedbcom-flexibledatabase-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FlexibleDatabase Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `dbformysqlazurekubedbcom-flexibledatabase-editor`: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibledatabase-editor appscode/dbformysqlazurekubedbcom-flexibledatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibledatabase-editor appscode/dbformysqlazurekubedbcom-flexibledatabase-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FlexibleDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformysqlazurekub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibledatabase-editor appscode/dbformysqlazurekubedbcom-flexibledatabase-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibledatabase-editor appscode/dbformysqlazurekubedbcom-flexibledatabase-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibledatabase-editor appscode/dbformysqlazurekubedbcom-flexibledatabase-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbformysqlazurekubedbcom-flexibledatabase-editor appscode/dbformysqlazurekubedbcom-flexibledatabase-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbformysqlazurekubedbcom-flexibleserver-editor/Chart.yaml b/charts/dbformysqlazurekubedbcom-flexibleserver-editor/Chart.yaml index 7c4d4d976c..e77d1d9069 100644 --- a/charts/dbformysqlazurekubedbcom-flexibleserver-editor/Chart.yaml +++ b/charts/dbformysqlazurekubedbcom-flexibleserver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformysql.azure.kubedb.com","version":"v1alpha1","resource":"flexibleservers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FlexibleServer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformysqlazurekubedbcom-flexibleserver-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbformysqlazurekubedbcom-flexibleserver-editor/README.md b/charts/dbformysqlazurekubedbcom-flexibleserver-editor/README.md index 4a41a5421f..a0b97d04ef 100644 --- a/charts/dbformysqlazurekubedbcom-flexibleserver-editor/README.md +++ b/charts/dbformysqlazurekubedbcom-flexibleserver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformysqlazurekubedbcom-flexibleserver-editor --version=v0.38.0 -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserver-editor appscode/dbformysqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbformysqlazurekubedbcom-flexibleserver-editor --version=v0.39.0 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserver-editor appscode/dbformysqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FlexibleServer Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `dbformysqlazurekubedbcom-flexibleserver-editor`: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserver-editor appscode/dbformysqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserver-editor appscode/dbformysqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FlexibleServer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformysqlazurekub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserver-editor appscode/dbformysqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserver-editor appscode/dbformysqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserver-editor appscode/dbformysqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserver-editor appscode/dbformysqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor/Chart.yaml b/charts/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor/Chart.yaml index 4de4dbbb26..55c3b64613 100644 --- a/charts/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor/Chart.yaml +++ b/charts/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformysql.azure.kubedb.com","version":"v1alpha1","resource":"flexibleserverconfigurations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FlexibleServerConfiguration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformysqlazurekubedbcom-flexibleserverconfiguration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor/README.md b/charts/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor/README.md index f1d63cc08b..593293ba68 100644 --- a/charts/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor/README.md +++ b/charts/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor --version=v0.38.0 -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor --version=v0.39.0 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FlexibleServerConfiguration Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `dbformysqlazurekubedbcom-flexibleserverconfiguration-editor`: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FlexibleServerConfiguration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformysqlazurekub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor/Chart.yaml b/charts/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor/Chart.yaml index a9107289c4..dad31a7c7d 100644 --- a/charts/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor/Chart.yaml +++ b/charts/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformysql.azure.kubedb.com","version":"v1alpha1","resource":"flexibleserverfirewallrules"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FlexibleServerFirewallRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor/README.md b/charts/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor/README.md index 7e473e015d..f22a7ad04e 100644 --- a/charts/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor/README.md +++ b/charts/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor --version=v0.38.0 -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor --version=v0.39.0 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FlexibleServerFirewallRule Editor on a [Kubernetes](http:// To install/upgrade the chart with the release name `dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor`: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FlexibleServerFirewallRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformysqlazurekub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbformysqlazurekubedbcom-server-editor/Chart.yaml b/charts/dbformysqlazurekubedbcom-server-editor/Chart.yaml index 72169c2015..b04b5129a3 100644 --- a/charts/dbformysqlazurekubedbcom-server-editor/Chart.yaml +++ b/charts/dbformysqlazurekubedbcom-server-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformysql.azure.kubedb.com","version":"v1alpha1","resource":"servers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Server Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformysqlazurekubedbcom-server-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbformysqlazurekubedbcom-server-editor/README.md b/charts/dbformysqlazurekubedbcom-server-editor/README.md index 19a08cbb56..6ee209cd02 100644 --- a/charts/dbformysqlazurekubedbcom-server-editor/README.md +++ b/charts/dbformysqlazurekubedbcom-server-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformysqlazurekubedbcom-server-editor --version=v0.38.0 -$ helm upgrade -i dbformysqlazurekubedbcom-server-editor appscode/dbformysqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbformysqlazurekubedbcom-server-editor --version=v0.39.0 +$ helm upgrade -i dbformysqlazurekubedbcom-server-editor appscode/dbformysqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Server Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `dbformysqlazurekubedbcom-server-editor`: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-server-editor appscode/dbformysqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbformysqlazurekubedbcom-server-editor appscode/dbformysqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Server Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformysqlazurekub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-server-editor appscode/dbformysqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformysqlazurekubedbcom-server-editor appscode/dbformysqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-server-editor appscode/dbformysqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbformysqlazurekubedbcom-server-editor appscode/dbformysqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbformysqlazurekubedbcom-virtualnetworkrule-editor/Chart.yaml b/charts/dbformysqlazurekubedbcom-virtualnetworkrule-editor/Chart.yaml index 3794676d3d..4d29e1914b 100644 --- a/charts/dbformysqlazurekubedbcom-virtualnetworkrule-editor/Chart.yaml +++ b/charts/dbformysqlazurekubedbcom-virtualnetworkrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformysql.azure.kubedb.com","version":"v1alpha1","resource":"virtualnetworkrules"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: VirtualNetworkRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformysqlazurekubedbcom-virtualnetworkrule-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbformysqlazurekubedbcom-virtualnetworkrule-editor/README.md b/charts/dbformysqlazurekubedbcom-virtualnetworkrule-editor/README.md index 7fc140b35e..7182a1ce40 100644 --- a/charts/dbformysqlazurekubedbcom-virtualnetworkrule-editor/README.md +++ b/charts/dbformysqlazurekubedbcom-virtualnetworkrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformysqlazurekubedbcom-virtualnetworkrule-editor --version=v0.38.0 -$ helm upgrade -i dbformysqlazurekubedbcom-virtualnetworkrule-editor appscode/dbformysqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbformysqlazurekubedbcom-virtualnetworkrule-editor --version=v0.39.0 +$ helm upgrade -i dbformysqlazurekubedbcom-virtualnetworkrule-editor appscode/dbformysqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VirtualNetworkRule Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `dbformysqlazurekubedbcom-virtualnetworkrule-editor`: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-virtualnetworkrule-editor appscode/dbformysqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbformysqlazurekubedbcom-virtualnetworkrule-editor appscode/dbformysqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a VirtualNetworkRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformysqlazurekub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-virtualnetworkrule-editor appscode/dbformysqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformysqlazurekubedbcom-virtualnetworkrule-editor appscode/dbformysqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-virtualnetworkrule-editor appscode/dbformysqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbformysqlazurekubedbcom-virtualnetworkrule-editor appscode/dbformysqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor/Chart.yaml index bdb7017d32..64348a1aba 100644 --- a/charts/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"activedirectoryadministrators"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ActiveDirectoryAdministrator Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor/README.md index 607e30d262..5965550977 100644 --- a/charts/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor --version=v0.38.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor --version=v0.39.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ActiveDirectoryAdministrator Editor on a [Kubernetes](http: To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ActiveDirectoryAdministrator Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-configuration-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-configuration-editor/Chart.yaml index f310eafd57..28aa126b53 100644 --- a/charts/dbforpostgresqlazurekubedbcom-configuration-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-configuration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"configurations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Configuration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-configuration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-configuration-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-configuration-editor/README.md index 0e7ba05917..0a30a2ca32 100644 --- a/charts/dbforpostgresqlazurekubedbcom-configuration-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-configuration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-configuration-editor --version=v0.38.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-configuration-editor appscode/dbforpostgresqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-configuration-editor --version=v0.39.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-configuration-editor appscode/dbforpostgresqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Configuration Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-configuration-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-configuration-editor appscode/dbforpostgresqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-configuration-editor appscode/dbforpostgresqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Configuration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-configuration-editor appscode/dbforpostgresqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-configuration-editor appscode/dbforpostgresqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-configuration-editor appscode/dbforpostgresqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-configuration-editor appscode/dbforpostgresqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-database-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-database-editor/Chart.yaml index cb32de20d0..5a001656e8 100644 --- a/charts/dbforpostgresqlazurekubedbcom-database-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-database-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"databases"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Database Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-database-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-database-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-database-editor/README.md index 835648028f..656e0a6e81 100644 --- a/charts/dbforpostgresqlazurekubedbcom-database-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-database-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-database-editor --version=v0.38.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-database-editor appscode/dbforpostgresqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-database-editor --version=v0.39.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-database-editor appscode/dbforpostgresqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Database Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-database-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-database-editor appscode/dbforpostgresqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-database-editor appscode/dbforpostgresqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Database Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-database-editor appscode/dbforpostgresqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-database-editor appscode/dbforpostgresqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-database-editor appscode/dbforpostgresqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-database-editor appscode/dbforpostgresqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-firewallrule-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-firewallrule-editor/Chart.yaml index 7ce0f3de77..03cadf5081 100644 --- a/charts/dbforpostgresqlazurekubedbcom-firewallrule-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-firewallrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"firewallrules"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FirewallRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-firewallrule-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-firewallrule-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-firewallrule-editor/README.md index aaca5c84b2..6e0a470dda 100644 --- a/charts/dbforpostgresqlazurekubedbcom-firewallrule-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-firewallrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-firewallrule-editor --version=v0.38.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-firewallrule-editor appscode/dbforpostgresqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-firewallrule-editor --version=v0.39.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-firewallrule-editor appscode/dbforpostgresqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FirewallRule Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-firewallrule-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-firewallrule-editor appscode/dbforpostgresqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-firewallrule-editor appscode/dbforpostgresqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FirewallRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-firewallrule-editor appscode/dbforpostgresqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-firewallrule-editor appscode/dbforpostgresqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-firewallrule-editor appscode/dbforpostgresqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-firewallrule-editor appscode/dbforpostgresqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-flexibleserver-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-flexibleserver-editor/Chart.yaml index aaa05a7a6b..4e2658856d 100644 --- a/charts/dbforpostgresqlazurekubedbcom-flexibleserver-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-flexibleserver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"flexibleservers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FlexibleServer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-flexibleserver-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-flexibleserver-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-flexibleserver-editor/README.md index e6600b4486..8f8670960d 100644 --- a/charts/dbforpostgresqlazurekubedbcom-flexibleserver-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-flexibleserver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-flexibleserver-editor --version=v0.38.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserver-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-flexibleserver-editor --version=v0.39.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserver-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FlexibleServer Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-flexibleserver-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserver-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserver-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FlexibleServer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserver-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserver-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserver-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserver-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor/Chart.yaml index 07a2ce307e..37571548c4 100644 --- a/charts/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"flexibleserverconfigurations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FlexibleServerConfiguration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor/README.md index 33ebb37693..b142201022 100644 --- a/charts/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor --version=v0.38.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor --version=v0.39.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FlexibleServerConfiguration Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FlexibleServerConfiguration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor/Chart.yaml index 2e7748ec92..36740e96a1 100644 --- a/charts/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"flexibleserverdatabases"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FlexibleServerDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor/README.md index 08ce773f0b..2b210f4dea 100644 --- a/charts/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor --version=v0.38.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor --version=v0.39.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FlexibleServerDatabase Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FlexibleServerDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor/Chart.yaml index dfec60c190..73e87bacf4 100644 --- a/charts/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"flexibleserverfirewallrules"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FlexibleServerFirewallRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor/README.md index 0c6c267200..08ad3e48f3 100644 --- a/charts/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor --version=v0.38.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor --version=v0.39.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FlexibleServerFirewallRule Editor on a [Kubernetes](http:// To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FlexibleServerFirewallRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-server-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-server-editor/Chart.yaml index 1f4d1f5443..a2da92c57c 100644 --- a/charts/dbforpostgresqlazurekubedbcom-server-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-server-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"servers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Server Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-server-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-server-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-server-editor/README.md index a9f4245656..82fda27919 100644 --- a/charts/dbforpostgresqlazurekubedbcom-server-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-server-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-server-editor --version=v0.38.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-server-editor appscode/dbforpostgresqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-server-editor --version=v0.39.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-server-editor appscode/dbforpostgresqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Server Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-server-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-server-editor appscode/dbforpostgresqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-server-editor appscode/dbforpostgresqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Server Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-server-editor appscode/dbforpostgresqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-server-editor appscode/dbforpostgresqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-server-editor appscode/dbforpostgresqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-server-editor appscode/dbforpostgresqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-serverkey-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-serverkey-editor/Chart.yaml index 399b4cc740..f42615ff82 100644 --- a/charts/dbforpostgresqlazurekubedbcom-serverkey-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-serverkey-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"serverkeys"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ServerKey Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-serverkey-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-serverkey-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-serverkey-editor/README.md index 5bc4c11b42..150dfd422f 100644 --- a/charts/dbforpostgresqlazurekubedbcom-serverkey-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-serverkey-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-serverkey-editor --version=v0.38.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-serverkey-editor appscode/dbforpostgresqlazurekubedbcom-serverkey-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-serverkey-editor --version=v0.39.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-serverkey-editor appscode/dbforpostgresqlazurekubedbcom-serverkey-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ServerKey Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-serverkey-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-serverkey-editor appscode/dbforpostgresqlazurekubedbcom-serverkey-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-serverkey-editor appscode/dbforpostgresqlazurekubedbcom-serverkey-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ServerKey Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-serverkey-editor appscode/dbforpostgresqlazurekubedbcom-serverkey-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-serverkey-editor appscode/dbforpostgresqlazurekubedbcom-serverkey-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-serverkey-editor appscode/dbforpostgresqlazurekubedbcom-serverkey-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-serverkey-editor appscode/dbforpostgresqlazurekubedbcom-serverkey-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor/Chart.yaml index 5d71adde21..5f07c29331 100644 --- a/charts/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"virtualnetworkrules"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: VirtualNetworkRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor/README.md index 6b155bbdfe..796ba1aebe 100644 --- a/charts/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor --version=v0.38.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor appscode/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor --version=v0.39.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor appscode/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VirtualNetworkRule Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor appscode/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor appscode/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a VirtualNetworkRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor appscode/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor appscode/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor appscode/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor appscode/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/discoveryk8sio-endpointslice-editor/Chart.yaml b/charts/discoveryk8sio-endpointslice-editor/Chart.yaml index b773674b16..3742657707 100644 --- a/charts/discoveryk8sio-endpointslice-editor/Chart.yaml +++ b/charts/discoveryk8sio-endpointslice-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"discovery.k8s.io","version":"v1","resource":"endpointslices"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: EndpointSlice Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: discoveryk8sio-endpointslice-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/discoveryk8sio-endpointslice-editor/README.md b/charts/discoveryk8sio-endpointslice-editor/README.md index 2fda4e3eb6..1d1ee2a0d2 100644 --- a/charts/discoveryk8sio-endpointslice-editor/README.md +++ b/charts/discoveryk8sio-endpointslice-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/discoveryk8sio-endpointslice-editor --version=v0.38.0 -$ helm upgrade -i discoveryk8sio-endpointslice-editor appscode/discoveryk8sio-endpointslice-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/discoveryk8sio-endpointslice-editor --version=v0.39.0 +$ helm upgrade -i discoveryk8sio-endpointslice-editor appscode/discoveryk8sio-endpointslice-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EndpointSlice Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `discoveryk8sio-endpointslice-editor`: ```bash -$ helm upgrade -i discoveryk8sio-endpointslice-editor appscode/discoveryk8sio-endpointslice-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i discoveryk8sio-endpointslice-editor appscode/discoveryk8sio-endpointslice-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a EndpointSlice Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `discoveryk8sio-end Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i discoveryk8sio-endpointslice-editor appscode/discoveryk8sio-endpointslice-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=discovery.k8s.io/v1 +$ helm upgrade -i discoveryk8sio-endpointslice-editor appscode/discoveryk8sio-endpointslice-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=discovery.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i discoveryk8sio-endpointslice-editor appscode/discoveryk8sio-endpointslice-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i discoveryk8sio-endpointslice-editor appscode/discoveryk8sio-endpointslice-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/docdbawskubedbcom-cluster-editor/Chart.yaml b/charts/docdbawskubedbcom-cluster-editor/Chart.yaml index 88f00ee6a8..9b54931274 100644 --- a/charts/docdbawskubedbcom-cluster-editor/Chart.yaml +++ b/charts/docdbawskubedbcom-cluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"docdb.aws.kubedb.com","version":"v1alpha1","resource":"clusters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Cluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: docdbawskubedbcom-cluster-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/docdbawskubedbcom-cluster-editor/README.md b/charts/docdbawskubedbcom-cluster-editor/README.md index 4a17d5acb8..b832c26e80 100644 --- a/charts/docdbawskubedbcom-cluster-editor/README.md +++ b/charts/docdbawskubedbcom-cluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/docdbawskubedbcom-cluster-editor --version=v0.38.0 -$ helm upgrade -i docdbawskubedbcom-cluster-editor appscode/docdbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/docdbawskubedbcom-cluster-editor --version=v0.39.0 +$ helm upgrade -i docdbawskubedbcom-cluster-editor appscode/docdbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Cluster Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `docdbawskubedbcom-cluster-editor`: ```bash -$ helm upgrade -i docdbawskubedbcom-cluster-editor appscode/docdbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i docdbawskubedbcom-cluster-editor appscode/docdbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Cluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `docdbawskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-cluster-editor appscode/docdbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i docdbawskubedbcom-cluster-editor appscode/docdbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-cluster-editor appscode/docdbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i docdbawskubedbcom-cluster-editor appscode/docdbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/docdbawskubedbcom-clusterinstance-editor/Chart.yaml b/charts/docdbawskubedbcom-clusterinstance-editor/Chart.yaml index 64863713ef..a6262fba45 100644 --- a/charts/docdbawskubedbcom-clusterinstance-editor/Chart.yaml +++ b/charts/docdbawskubedbcom-clusterinstance-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"docdb.aws.kubedb.com","version":"v1alpha1","resource":"clusterinstances"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterInstance Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: docdbawskubedbcom-clusterinstance-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/docdbawskubedbcom-clusterinstance-editor/README.md b/charts/docdbawskubedbcom-clusterinstance-editor/README.md index 5d728de62a..d6667307b1 100644 --- a/charts/docdbawskubedbcom-clusterinstance-editor/README.md +++ b/charts/docdbawskubedbcom-clusterinstance-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/docdbawskubedbcom-clusterinstance-editor --version=v0.38.0 -$ helm upgrade -i docdbawskubedbcom-clusterinstance-editor appscode/docdbawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/docdbawskubedbcom-clusterinstance-editor --version=v0.39.0 +$ helm upgrade -i docdbawskubedbcom-clusterinstance-editor appscode/docdbawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterInstance Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `docdbawskubedbcom-clusterinstance-editor`: ```bash -$ helm upgrade -i docdbawskubedbcom-clusterinstance-editor appscode/docdbawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i docdbawskubedbcom-clusterinstance-editor appscode/docdbawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterInstance Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `docdbawskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-clusterinstance-editor appscode/docdbawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i docdbawskubedbcom-clusterinstance-editor appscode/docdbawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-clusterinstance-editor appscode/docdbawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i docdbawskubedbcom-clusterinstance-editor appscode/docdbawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/docdbawskubedbcom-clusterparametergroup-editor/Chart.yaml b/charts/docdbawskubedbcom-clusterparametergroup-editor/Chart.yaml index 3d518b9708..4a6a841153 100644 --- a/charts/docdbawskubedbcom-clusterparametergroup-editor/Chart.yaml +++ b/charts/docdbawskubedbcom-clusterparametergroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"docdb.aws.kubedb.com","version":"v1alpha1","resource":"clusterparametergroups"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterParameterGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: docdbawskubedbcom-clusterparametergroup-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/docdbawskubedbcom-clusterparametergroup-editor/README.md b/charts/docdbawskubedbcom-clusterparametergroup-editor/README.md index 8fccbbe46a..cc79920c76 100644 --- a/charts/docdbawskubedbcom-clusterparametergroup-editor/README.md +++ b/charts/docdbawskubedbcom-clusterparametergroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/docdbawskubedbcom-clusterparametergroup-editor --version=v0.38.0 -$ helm upgrade -i docdbawskubedbcom-clusterparametergroup-editor appscode/docdbawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/docdbawskubedbcom-clusterparametergroup-editor --version=v0.39.0 +$ helm upgrade -i docdbawskubedbcom-clusterparametergroup-editor appscode/docdbawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterParameterGroup Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `docdbawskubedbcom-clusterparametergroup-editor`: ```bash -$ helm upgrade -i docdbawskubedbcom-clusterparametergroup-editor appscode/docdbawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i docdbawskubedbcom-clusterparametergroup-editor appscode/docdbawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterParameterGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `docdbawskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-clusterparametergroup-editor appscode/docdbawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i docdbawskubedbcom-clusterparametergroup-editor appscode/docdbawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-clusterparametergroup-editor appscode/docdbawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i docdbawskubedbcom-clusterparametergroup-editor appscode/docdbawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/docdbawskubedbcom-clustersnapshot-editor/Chart.yaml b/charts/docdbawskubedbcom-clustersnapshot-editor/Chart.yaml index c4615548aa..b49eaed295 100644 --- a/charts/docdbawskubedbcom-clustersnapshot-editor/Chart.yaml +++ b/charts/docdbawskubedbcom-clustersnapshot-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"docdb.aws.kubedb.com","version":"v1alpha1","resource":"clustersnapshots"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterSnapshot Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: docdbawskubedbcom-clustersnapshot-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/docdbawskubedbcom-clustersnapshot-editor/README.md b/charts/docdbawskubedbcom-clustersnapshot-editor/README.md index 559c74c425..e8e0d534c8 100644 --- a/charts/docdbawskubedbcom-clustersnapshot-editor/README.md +++ b/charts/docdbawskubedbcom-clustersnapshot-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/docdbawskubedbcom-clustersnapshot-editor --version=v0.38.0 -$ helm upgrade -i docdbawskubedbcom-clustersnapshot-editor appscode/docdbawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/docdbawskubedbcom-clustersnapshot-editor --version=v0.39.0 +$ helm upgrade -i docdbawskubedbcom-clustersnapshot-editor appscode/docdbawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterSnapshot Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `docdbawskubedbcom-clustersnapshot-editor`: ```bash -$ helm upgrade -i docdbawskubedbcom-clustersnapshot-editor appscode/docdbawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i docdbawskubedbcom-clustersnapshot-editor appscode/docdbawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterSnapshot Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `docdbawskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-clustersnapshot-editor appscode/docdbawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i docdbawskubedbcom-clustersnapshot-editor appscode/docdbawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-clustersnapshot-editor appscode/docdbawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i docdbawskubedbcom-clustersnapshot-editor appscode/docdbawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/docdbawskubedbcom-eventsubscription-editor/Chart.yaml b/charts/docdbawskubedbcom-eventsubscription-editor/Chart.yaml index 8011ce427d..7ff8b2f7a1 100644 --- a/charts/docdbawskubedbcom-eventsubscription-editor/Chart.yaml +++ b/charts/docdbawskubedbcom-eventsubscription-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"docdb.aws.kubedb.com","version":"v1alpha1","resource":"eventsubscriptions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: EventSubscription Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: docdbawskubedbcom-eventsubscription-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/docdbawskubedbcom-eventsubscription-editor/README.md b/charts/docdbawskubedbcom-eventsubscription-editor/README.md index de556464ce..8661980aaa 100644 --- a/charts/docdbawskubedbcom-eventsubscription-editor/README.md +++ b/charts/docdbawskubedbcom-eventsubscription-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/docdbawskubedbcom-eventsubscription-editor --version=v0.38.0 -$ helm upgrade -i docdbawskubedbcom-eventsubscription-editor appscode/docdbawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/docdbawskubedbcom-eventsubscription-editor --version=v0.39.0 +$ helm upgrade -i docdbawskubedbcom-eventsubscription-editor appscode/docdbawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EventSubscription Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `docdbawskubedbcom-eventsubscription-editor`: ```bash -$ helm upgrade -i docdbawskubedbcom-eventsubscription-editor appscode/docdbawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i docdbawskubedbcom-eventsubscription-editor appscode/docdbawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a EventSubscription Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `docdbawskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-eventsubscription-editor appscode/docdbawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i docdbawskubedbcom-eventsubscription-editor appscode/docdbawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-eventsubscription-editor appscode/docdbawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i docdbawskubedbcom-eventsubscription-editor appscode/docdbawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/docdbawskubedbcom-globalcluster-editor/Chart.yaml b/charts/docdbawskubedbcom-globalcluster-editor/Chart.yaml index bcaf0fe673..7c7cd04307 100644 --- a/charts/docdbawskubedbcom-globalcluster-editor/Chart.yaml +++ b/charts/docdbawskubedbcom-globalcluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"docdb.aws.kubedb.com","version":"v1alpha1","resource":"globalclusters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GlobalCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: docdbawskubedbcom-globalcluster-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/docdbawskubedbcom-globalcluster-editor/README.md b/charts/docdbawskubedbcom-globalcluster-editor/README.md index ceb86ec642..4bd42dfe7b 100644 --- a/charts/docdbawskubedbcom-globalcluster-editor/README.md +++ b/charts/docdbawskubedbcom-globalcluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/docdbawskubedbcom-globalcluster-editor --version=v0.38.0 -$ helm upgrade -i docdbawskubedbcom-globalcluster-editor appscode/docdbawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/docdbawskubedbcom-globalcluster-editor --version=v0.39.0 +$ helm upgrade -i docdbawskubedbcom-globalcluster-editor appscode/docdbawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GlobalCluster Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `docdbawskubedbcom-globalcluster-editor`: ```bash -$ helm upgrade -i docdbawskubedbcom-globalcluster-editor appscode/docdbawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i docdbawskubedbcom-globalcluster-editor appscode/docdbawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GlobalCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `docdbawskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-globalcluster-editor appscode/docdbawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i docdbawskubedbcom-globalcluster-editor appscode/docdbawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-globalcluster-editor appscode/docdbawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i docdbawskubedbcom-globalcluster-editor appscode/docdbawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/docdbawskubedbcom-subnetgroup-editor/Chart.yaml b/charts/docdbawskubedbcom-subnetgroup-editor/Chart.yaml index 01e327f4c3..47284ad8dc 100644 --- a/charts/docdbawskubedbcom-subnetgroup-editor/Chart.yaml +++ b/charts/docdbawskubedbcom-subnetgroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"docdb.aws.kubedb.com","version":"v1alpha1","resource":"subnetgroups"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SubnetGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: docdbawskubedbcom-subnetgroup-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/docdbawskubedbcom-subnetgroup-editor/README.md b/charts/docdbawskubedbcom-subnetgroup-editor/README.md index aa8c4c66cc..96cbd7209a 100644 --- a/charts/docdbawskubedbcom-subnetgroup-editor/README.md +++ b/charts/docdbawskubedbcom-subnetgroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/docdbawskubedbcom-subnetgroup-editor --version=v0.38.0 -$ helm upgrade -i docdbawskubedbcom-subnetgroup-editor appscode/docdbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/docdbawskubedbcom-subnetgroup-editor --version=v0.39.0 +$ helm upgrade -i docdbawskubedbcom-subnetgroup-editor appscode/docdbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SubnetGroup Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `docdbawskubedbcom-subnetgroup-editor`: ```bash -$ helm upgrade -i docdbawskubedbcom-subnetgroup-editor appscode/docdbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i docdbawskubedbcom-subnetgroup-editor appscode/docdbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SubnetGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `docdbawskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-subnetgroup-editor appscode/docdbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i docdbawskubedbcom-subnetgroup-editor appscode/docdbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-subnetgroup-editor appscode/docdbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i docdbawskubedbcom-subnetgroup-editor appscode/docdbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/driversxhelmdev-apprelease-editor/Chart.yaml b/charts/driversxhelmdev-apprelease-editor/Chart.yaml index bd74a8f71f..971ab2ce21 100644 --- a/charts/driversxhelmdev-apprelease-editor/Chart.yaml +++ b/charts/driversxhelmdev-apprelease-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"drivers.x-helm.dev","version":"v1alpha1","resource":"appreleases"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AppRelease Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: driversxhelmdev-apprelease-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/driversxhelmdev-apprelease-editor/README.md b/charts/driversxhelmdev-apprelease-editor/README.md index 4ce3c1342a..a4e81c07de 100644 --- a/charts/driversxhelmdev-apprelease-editor/README.md +++ b/charts/driversxhelmdev-apprelease-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/driversxhelmdev-apprelease-editor --version=v0.38.0 -$ helm upgrade -i driversxhelmdev-apprelease-editor appscode/driversxhelmdev-apprelease-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/driversxhelmdev-apprelease-editor --version=v0.39.0 +$ helm upgrade -i driversxhelmdev-apprelease-editor appscode/driversxhelmdev-apprelease-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AppRelease Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `driversxhelmdev-apprelease-editor`: ```bash -$ helm upgrade -i driversxhelmdev-apprelease-editor appscode/driversxhelmdev-apprelease-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i driversxhelmdev-apprelease-editor appscode/driversxhelmdev-apprelease-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AppRelease Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `driversxhelmdev-ap Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i driversxhelmdev-apprelease-editor appscode/driversxhelmdev-apprelease-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=drivers.x-helm.dev/v1alpha1 +$ helm upgrade -i driversxhelmdev-apprelease-editor appscode/driversxhelmdev-apprelease-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=drivers.x-helm.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i driversxhelmdev-apprelease-editor appscode/driversxhelmdev-apprelease-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i driversxhelmdev-apprelease-editor appscode/driversxhelmdev-apprelease-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dynamodbawskubedbcom-contributorinsights-editor/Chart.yaml b/charts/dynamodbawskubedbcom-contributorinsights-editor/Chart.yaml index 1ef2830201..373503b18f 100644 --- a/charts/dynamodbawskubedbcom-contributorinsights-editor/Chart.yaml +++ b/charts/dynamodbawskubedbcom-contributorinsights-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dynamodb.aws.kubedb.com","version":"v1alpha1","resource":"contributorinsights"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ContributorInsights Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dynamodbawskubedbcom-contributorinsights-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dynamodbawskubedbcom-contributorinsights-editor/README.md b/charts/dynamodbawskubedbcom-contributorinsights-editor/README.md index 36abc46340..5257f1e936 100644 --- a/charts/dynamodbawskubedbcom-contributorinsights-editor/README.md +++ b/charts/dynamodbawskubedbcom-contributorinsights-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dynamodbawskubedbcom-contributorinsights-editor --version=v0.38.0 -$ helm upgrade -i dynamodbawskubedbcom-contributorinsights-editor appscode/dynamodbawskubedbcom-contributorinsights-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dynamodbawskubedbcom-contributorinsights-editor --version=v0.39.0 +$ helm upgrade -i dynamodbawskubedbcom-contributorinsights-editor appscode/dynamodbawskubedbcom-contributorinsights-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ContributorInsights Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `dynamodbawskubedbcom-contributorinsights-editor`: ```bash -$ helm upgrade -i dynamodbawskubedbcom-contributorinsights-editor appscode/dynamodbawskubedbcom-contributorinsights-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dynamodbawskubedbcom-contributorinsights-editor appscode/dynamodbawskubedbcom-contributorinsights-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ContributorInsights Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dynamodbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-contributorinsights-editor appscode/dynamodbawskubedbcom-contributorinsights-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i dynamodbawskubedbcom-contributorinsights-editor appscode/dynamodbawskubedbcom-contributorinsights-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-contributorinsights-editor appscode/dynamodbawskubedbcom-contributorinsights-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dynamodbawskubedbcom-contributorinsights-editor appscode/dynamodbawskubedbcom-contributorinsights-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dynamodbawskubedbcom-globaltable-editor/Chart.yaml b/charts/dynamodbawskubedbcom-globaltable-editor/Chart.yaml index 0036edeac6..b467d1b887 100644 --- a/charts/dynamodbawskubedbcom-globaltable-editor/Chart.yaml +++ b/charts/dynamodbawskubedbcom-globaltable-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dynamodb.aws.kubedb.com","version":"v1alpha1","resource":"globaltables"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GlobalTable Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dynamodbawskubedbcom-globaltable-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dynamodbawskubedbcom-globaltable-editor/README.md b/charts/dynamodbawskubedbcom-globaltable-editor/README.md index ccc61bc6d8..3dbdd85d72 100644 --- a/charts/dynamodbawskubedbcom-globaltable-editor/README.md +++ b/charts/dynamodbawskubedbcom-globaltable-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dynamodbawskubedbcom-globaltable-editor --version=v0.38.0 -$ helm upgrade -i dynamodbawskubedbcom-globaltable-editor appscode/dynamodbawskubedbcom-globaltable-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dynamodbawskubedbcom-globaltable-editor --version=v0.39.0 +$ helm upgrade -i dynamodbawskubedbcom-globaltable-editor appscode/dynamodbawskubedbcom-globaltable-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GlobalTable Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `dynamodbawskubedbcom-globaltable-editor`: ```bash -$ helm upgrade -i dynamodbawskubedbcom-globaltable-editor appscode/dynamodbawskubedbcom-globaltable-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dynamodbawskubedbcom-globaltable-editor appscode/dynamodbawskubedbcom-globaltable-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GlobalTable Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dynamodbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-globaltable-editor appscode/dynamodbawskubedbcom-globaltable-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i dynamodbawskubedbcom-globaltable-editor appscode/dynamodbawskubedbcom-globaltable-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-globaltable-editor appscode/dynamodbawskubedbcom-globaltable-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dynamodbawskubedbcom-globaltable-editor appscode/dynamodbawskubedbcom-globaltable-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dynamodbawskubedbcom-kinesisstreamingdestination-editor/Chart.yaml b/charts/dynamodbawskubedbcom-kinesisstreamingdestination-editor/Chart.yaml index dfd9e5c1d8..5b91842aff 100644 --- a/charts/dynamodbawskubedbcom-kinesisstreamingdestination-editor/Chart.yaml +++ b/charts/dynamodbawskubedbcom-kinesisstreamingdestination-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dynamodb.aws.kubedb.com","version":"v1alpha1","resource":"kinesisstreamingdestinations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: KinesisStreamingDestination Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dynamodbawskubedbcom-kinesisstreamingdestination-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dynamodbawskubedbcom-kinesisstreamingdestination-editor/README.md b/charts/dynamodbawskubedbcom-kinesisstreamingdestination-editor/README.md index f7795362f3..f0572bf368 100644 --- a/charts/dynamodbawskubedbcom-kinesisstreamingdestination-editor/README.md +++ b/charts/dynamodbawskubedbcom-kinesisstreamingdestination-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dynamodbawskubedbcom-kinesisstreamingdestination-editor --version=v0.38.0 -$ helm upgrade -i dynamodbawskubedbcom-kinesisstreamingdestination-editor appscode/dynamodbawskubedbcom-kinesisstreamingdestination-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dynamodbawskubedbcom-kinesisstreamingdestination-editor --version=v0.39.0 +$ helm upgrade -i dynamodbawskubedbcom-kinesisstreamingdestination-editor appscode/dynamodbawskubedbcom-kinesisstreamingdestination-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a KinesisStreamingDestination Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `dynamodbawskubedbcom-kinesisstreamingdestination-editor`: ```bash -$ helm upgrade -i dynamodbawskubedbcom-kinesisstreamingdestination-editor appscode/dynamodbawskubedbcom-kinesisstreamingdestination-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dynamodbawskubedbcom-kinesisstreamingdestination-editor appscode/dynamodbawskubedbcom-kinesisstreamingdestination-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a KinesisStreamingDestination Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dynamodbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-kinesisstreamingdestination-editor appscode/dynamodbawskubedbcom-kinesisstreamingdestination-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i dynamodbawskubedbcom-kinesisstreamingdestination-editor appscode/dynamodbawskubedbcom-kinesisstreamingdestination-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-kinesisstreamingdestination-editor appscode/dynamodbawskubedbcom-kinesisstreamingdestination-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dynamodbawskubedbcom-kinesisstreamingdestination-editor appscode/dynamodbawskubedbcom-kinesisstreamingdestination-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dynamodbawskubedbcom-table-editor/Chart.yaml b/charts/dynamodbawskubedbcom-table-editor/Chart.yaml index e2c793c31d..2224850df3 100644 --- a/charts/dynamodbawskubedbcom-table-editor/Chart.yaml +++ b/charts/dynamodbawskubedbcom-table-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dynamodb.aws.kubedb.com","version":"v1alpha1","resource":"tables"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Table Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dynamodbawskubedbcom-table-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dynamodbawskubedbcom-table-editor/README.md b/charts/dynamodbawskubedbcom-table-editor/README.md index 9077ffa46d..2faf7ad2f6 100644 --- a/charts/dynamodbawskubedbcom-table-editor/README.md +++ b/charts/dynamodbawskubedbcom-table-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dynamodbawskubedbcom-table-editor --version=v0.38.0 -$ helm upgrade -i dynamodbawskubedbcom-table-editor appscode/dynamodbawskubedbcom-table-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dynamodbawskubedbcom-table-editor --version=v0.39.0 +$ helm upgrade -i dynamodbawskubedbcom-table-editor appscode/dynamodbawskubedbcom-table-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Table Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `dynamodbawskubedbcom-table-editor`: ```bash -$ helm upgrade -i dynamodbawskubedbcom-table-editor appscode/dynamodbawskubedbcom-table-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dynamodbawskubedbcom-table-editor appscode/dynamodbawskubedbcom-table-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Table Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dynamodbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-table-editor appscode/dynamodbawskubedbcom-table-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i dynamodbawskubedbcom-table-editor appscode/dynamodbawskubedbcom-table-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-table-editor appscode/dynamodbawskubedbcom-table-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dynamodbawskubedbcom-table-editor appscode/dynamodbawskubedbcom-table-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dynamodbawskubedbcom-tableitem-editor/Chart.yaml b/charts/dynamodbawskubedbcom-tableitem-editor/Chart.yaml index 06379557f1..a8be22199a 100644 --- a/charts/dynamodbawskubedbcom-tableitem-editor/Chart.yaml +++ b/charts/dynamodbawskubedbcom-tableitem-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dynamodb.aws.kubedb.com","version":"v1alpha1","resource":"tableitems"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: TableItem Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dynamodbawskubedbcom-tableitem-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dynamodbawskubedbcom-tableitem-editor/README.md b/charts/dynamodbawskubedbcom-tableitem-editor/README.md index 3f13205533..e4fb16e6c8 100644 --- a/charts/dynamodbawskubedbcom-tableitem-editor/README.md +++ b/charts/dynamodbawskubedbcom-tableitem-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dynamodbawskubedbcom-tableitem-editor --version=v0.38.0 -$ helm upgrade -i dynamodbawskubedbcom-tableitem-editor appscode/dynamodbawskubedbcom-tableitem-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dynamodbawskubedbcom-tableitem-editor --version=v0.39.0 +$ helm upgrade -i dynamodbawskubedbcom-tableitem-editor appscode/dynamodbawskubedbcom-tableitem-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a TableItem Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `dynamodbawskubedbcom-tableitem-editor`: ```bash -$ helm upgrade -i dynamodbawskubedbcom-tableitem-editor appscode/dynamodbawskubedbcom-tableitem-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dynamodbawskubedbcom-tableitem-editor appscode/dynamodbawskubedbcom-tableitem-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a TableItem Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dynamodbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-tableitem-editor appscode/dynamodbawskubedbcom-tableitem-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i dynamodbawskubedbcom-tableitem-editor appscode/dynamodbawskubedbcom-tableitem-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-tableitem-editor appscode/dynamodbawskubedbcom-tableitem-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dynamodbawskubedbcom-tableitem-editor appscode/dynamodbawskubedbcom-tableitem-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dynamodbawskubedbcom-tablereplica-editor/Chart.yaml b/charts/dynamodbawskubedbcom-tablereplica-editor/Chart.yaml index 4591a21bc3..dab3b3885e 100644 --- a/charts/dynamodbawskubedbcom-tablereplica-editor/Chart.yaml +++ b/charts/dynamodbawskubedbcom-tablereplica-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dynamodb.aws.kubedb.com","version":"v1alpha1","resource":"tablereplicas"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: TableReplica Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dynamodbawskubedbcom-tablereplica-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dynamodbawskubedbcom-tablereplica-editor/README.md b/charts/dynamodbawskubedbcom-tablereplica-editor/README.md index 3ded214b9d..5e530c3f18 100644 --- a/charts/dynamodbawskubedbcom-tablereplica-editor/README.md +++ b/charts/dynamodbawskubedbcom-tablereplica-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dynamodbawskubedbcom-tablereplica-editor --version=v0.38.0 -$ helm upgrade -i dynamodbawskubedbcom-tablereplica-editor appscode/dynamodbawskubedbcom-tablereplica-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dynamodbawskubedbcom-tablereplica-editor --version=v0.39.0 +$ helm upgrade -i dynamodbawskubedbcom-tablereplica-editor appscode/dynamodbawskubedbcom-tablereplica-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a TableReplica Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `dynamodbawskubedbcom-tablereplica-editor`: ```bash -$ helm upgrade -i dynamodbawskubedbcom-tablereplica-editor appscode/dynamodbawskubedbcom-tablereplica-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dynamodbawskubedbcom-tablereplica-editor appscode/dynamodbawskubedbcom-tablereplica-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a TableReplica Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dynamodbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-tablereplica-editor appscode/dynamodbawskubedbcom-tablereplica-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i dynamodbawskubedbcom-tablereplica-editor appscode/dynamodbawskubedbcom-tablereplica-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-tablereplica-editor appscode/dynamodbawskubedbcom-tablereplica-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dynamodbawskubedbcom-tablereplica-editor appscode/dynamodbawskubedbcom-tablereplica-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/dynamodbawskubedbcom-tag-editor/Chart.yaml b/charts/dynamodbawskubedbcom-tag-editor/Chart.yaml index 8bb8556d60..169367fdee 100644 --- a/charts/dynamodbawskubedbcom-tag-editor/Chart.yaml +++ b/charts/dynamodbawskubedbcom-tag-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dynamodb.aws.kubedb.com","version":"v1alpha1","resource":"tags"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Tag Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dynamodbawskubedbcom-tag-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/dynamodbawskubedbcom-tag-editor/README.md b/charts/dynamodbawskubedbcom-tag-editor/README.md index 7fa6e4b780..b30bb7bc75 100644 --- a/charts/dynamodbawskubedbcom-tag-editor/README.md +++ b/charts/dynamodbawskubedbcom-tag-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dynamodbawskubedbcom-tag-editor --version=v0.38.0 -$ helm upgrade -i dynamodbawskubedbcom-tag-editor appscode/dynamodbawskubedbcom-tag-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/dynamodbawskubedbcom-tag-editor --version=v0.39.0 +$ helm upgrade -i dynamodbawskubedbcom-tag-editor appscode/dynamodbawskubedbcom-tag-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Tag Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `dynamodbawskubedbcom-tag-editor`: ```bash -$ helm upgrade -i dynamodbawskubedbcom-tag-editor appscode/dynamodbawskubedbcom-tag-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i dynamodbawskubedbcom-tag-editor appscode/dynamodbawskubedbcom-tag-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Tag Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dynamodbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-tag-editor appscode/dynamodbawskubedbcom-tag-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i dynamodbawskubedbcom-tag-editor appscode/dynamodbawskubedbcom-tag-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-tag-editor appscode/dynamodbawskubedbcom-tag-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i dynamodbawskubedbcom-tag-editor appscode/dynamodbawskubedbcom-tag-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/ec2awskubedbcom-route-editor/Chart.yaml b/charts/ec2awskubedbcom-route-editor/Chart.yaml index 44fa1db5e2..d1c72a1a2a 100644 --- a/charts/ec2awskubedbcom-route-editor/Chart.yaml +++ b/charts/ec2awskubedbcom-route-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ec2.aws.kubedb.com","version":"v1alpha1","resource":"routes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Route Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: ec2awskubedbcom-route-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/ec2awskubedbcom-route-editor/README.md b/charts/ec2awskubedbcom-route-editor/README.md index 2011bd1481..29286f556b 100644 --- a/charts/ec2awskubedbcom-route-editor/README.md +++ b/charts/ec2awskubedbcom-route-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/ec2awskubedbcom-route-editor --version=v0.38.0 -$ helm upgrade -i ec2awskubedbcom-route-editor appscode/ec2awskubedbcom-route-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/ec2awskubedbcom-route-editor --version=v0.39.0 +$ helm upgrade -i ec2awskubedbcom-route-editor appscode/ec2awskubedbcom-route-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Route Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `ec2awskubedbcom-route-editor`: ```bash -$ helm upgrade -i ec2awskubedbcom-route-editor appscode/ec2awskubedbcom-route-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i ec2awskubedbcom-route-editor appscode/ec2awskubedbcom-route-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Route Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `ec2awskubedbcom-ro Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-route-editor appscode/ec2awskubedbcom-route-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 +$ helm upgrade -i ec2awskubedbcom-route-editor appscode/ec2awskubedbcom-route-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-route-editor appscode/ec2awskubedbcom-route-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i ec2awskubedbcom-route-editor appscode/ec2awskubedbcom-route-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/ec2awskubedbcom-securitygroup-editor/Chart.yaml b/charts/ec2awskubedbcom-securitygroup-editor/Chart.yaml index 06a16ea9cb..4d2b04dfc2 100644 --- a/charts/ec2awskubedbcom-securitygroup-editor/Chart.yaml +++ b/charts/ec2awskubedbcom-securitygroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ec2.aws.kubedb.com","version":"v1alpha1","resource":"securitygroups"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SecurityGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: ec2awskubedbcom-securitygroup-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/ec2awskubedbcom-securitygroup-editor/README.md b/charts/ec2awskubedbcom-securitygroup-editor/README.md index 5f76dddc85..cf8c8875e8 100644 --- a/charts/ec2awskubedbcom-securitygroup-editor/README.md +++ b/charts/ec2awskubedbcom-securitygroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/ec2awskubedbcom-securitygroup-editor --version=v0.38.0 -$ helm upgrade -i ec2awskubedbcom-securitygroup-editor appscode/ec2awskubedbcom-securitygroup-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/ec2awskubedbcom-securitygroup-editor --version=v0.39.0 +$ helm upgrade -i ec2awskubedbcom-securitygroup-editor appscode/ec2awskubedbcom-securitygroup-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecurityGroup Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `ec2awskubedbcom-securitygroup-editor`: ```bash -$ helm upgrade -i ec2awskubedbcom-securitygroup-editor appscode/ec2awskubedbcom-securitygroup-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i ec2awskubedbcom-securitygroup-editor appscode/ec2awskubedbcom-securitygroup-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SecurityGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `ec2awskubedbcom-se Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-securitygroup-editor appscode/ec2awskubedbcom-securitygroup-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 +$ helm upgrade -i ec2awskubedbcom-securitygroup-editor appscode/ec2awskubedbcom-securitygroup-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-securitygroup-editor appscode/ec2awskubedbcom-securitygroup-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i ec2awskubedbcom-securitygroup-editor appscode/ec2awskubedbcom-securitygroup-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/ec2awskubedbcom-securitygrouprule-editor/Chart.yaml b/charts/ec2awskubedbcom-securitygrouprule-editor/Chart.yaml index 4ccba4d91e..ab982387c0 100644 --- a/charts/ec2awskubedbcom-securitygrouprule-editor/Chart.yaml +++ b/charts/ec2awskubedbcom-securitygrouprule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ec2.aws.kubedb.com","version":"v1alpha1","resource":"securitygrouprules"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SecurityGroupRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: ec2awskubedbcom-securitygrouprule-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/ec2awskubedbcom-securitygrouprule-editor/README.md b/charts/ec2awskubedbcom-securitygrouprule-editor/README.md index 6927e5a807..32d4026e42 100644 --- a/charts/ec2awskubedbcom-securitygrouprule-editor/README.md +++ b/charts/ec2awskubedbcom-securitygrouprule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/ec2awskubedbcom-securitygrouprule-editor --version=v0.38.0 -$ helm upgrade -i ec2awskubedbcom-securitygrouprule-editor appscode/ec2awskubedbcom-securitygrouprule-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/ec2awskubedbcom-securitygrouprule-editor --version=v0.39.0 +$ helm upgrade -i ec2awskubedbcom-securitygrouprule-editor appscode/ec2awskubedbcom-securitygrouprule-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecurityGroupRule Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `ec2awskubedbcom-securitygrouprule-editor`: ```bash -$ helm upgrade -i ec2awskubedbcom-securitygrouprule-editor appscode/ec2awskubedbcom-securitygrouprule-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i ec2awskubedbcom-securitygrouprule-editor appscode/ec2awskubedbcom-securitygrouprule-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SecurityGroupRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `ec2awskubedbcom-se Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-securitygrouprule-editor appscode/ec2awskubedbcom-securitygrouprule-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 +$ helm upgrade -i ec2awskubedbcom-securitygrouprule-editor appscode/ec2awskubedbcom-securitygrouprule-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-securitygrouprule-editor appscode/ec2awskubedbcom-securitygrouprule-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i ec2awskubedbcom-securitygrouprule-editor appscode/ec2awskubedbcom-securitygrouprule-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/ec2awskubedbcom-subnet-editor/Chart.yaml b/charts/ec2awskubedbcom-subnet-editor/Chart.yaml index 08334cf6db..4c7d4d92ff 100644 --- a/charts/ec2awskubedbcom-subnet-editor/Chart.yaml +++ b/charts/ec2awskubedbcom-subnet-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ec2.aws.kubedb.com","version":"v1alpha1","resource":"subnets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Subnet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: ec2awskubedbcom-subnet-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/ec2awskubedbcom-subnet-editor/README.md b/charts/ec2awskubedbcom-subnet-editor/README.md index 05879c3b5e..2cbc410e4e 100644 --- a/charts/ec2awskubedbcom-subnet-editor/README.md +++ b/charts/ec2awskubedbcom-subnet-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/ec2awskubedbcom-subnet-editor --version=v0.38.0 -$ helm upgrade -i ec2awskubedbcom-subnet-editor appscode/ec2awskubedbcom-subnet-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/ec2awskubedbcom-subnet-editor --version=v0.39.0 +$ helm upgrade -i ec2awskubedbcom-subnet-editor appscode/ec2awskubedbcom-subnet-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Subnet Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `ec2awskubedbcom-subnet-editor`: ```bash -$ helm upgrade -i ec2awskubedbcom-subnet-editor appscode/ec2awskubedbcom-subnet-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i ec2awskubedbcom-subnet-editor appscode/ec2awskubedbcom-subnet-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Subnet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `ec2awskubedbcom-su Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-subnet-editor appscode/ec2awskubedbcom-subnet-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 +$ helm upgrade -i ec2awskubedbcom-subnet-editor appscode/ec2awskubedbcom-subnet-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-subnet-editor appscode/ec2awskubedbcom-subnet-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i ec2awskubedbcom-subnet-editor appscode/ec2awskubedbcom-subnet-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/ec2awskubedbcom-vpc-editor/Chart.yaml b/charts/ec2awskubedbcom-vpc-editor/Chart.yaml index 8309b36c6d..e2fabcdaba 100644 --- a/charts/ec2awskubedbcom-vpc-editor/Chart.yaml +++ b/charts/ec2awskubedbcom-vpc-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ec2.aws.kubedb.com","version":"v1alpha1","resource":"vpcs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: VPC Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: ec2awskubedbcom-vpc-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/ec2awskubedbcom-vpc-editor/README.md b/charts/ec2awskubedbcom-vpc-editor/README.md index 4220c30f97..58863fa083 100644 --- a/charts/ec2awskubedbcom-vpc-editor/README.md +++ b/charts/ec2awskubedbcom-vpc-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/ec2awskubedbcom-vpc-editor --version=v0.38.0 -$ helm upgrade -i ec2awskubedbcom-vpc-editor appscode/ec2awskubedbcom-vpc-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/ec2awskubedbcom-vpc-editor --version=v0.39.0 +$ helm upgrade -i ec2awskubedbcom-vpc-editor appscode/ec2awskubedbcom-vpc-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VPC Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `ec2awskubedbcom-vpc-editor`: ```bash -$ helm upgrade -i ec2awskubedbcom-vpc-editor appscode/ec2awskubedbcom-vpc-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i ec2awskubedbcom-vpc-editor appscode/ec2awskubedbcom-vpc-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a VPC Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `ec2awskubedbcom-vp Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-vpc-editor appscode/ec2awskubedbcom-vpc-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 +$ helm upgrade -i ec2awskubedbcom-vpc-editor appscode/ec2awskubedbcom-vpc-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-vpc-editor appscode/ec2awskubedbcom-vpc-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i ec2awskubedbcom-vpc-editor appscode/ec2awskubedbcom-vpc-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/ec2awskubedbcom-vpcendpoint-editor/Chart.yaml b/charts/ec2awskubedbcom-vpcendpoint-editor/Chart.yaml index 1d21268de4..2b6e4d2c34 100644 --- a/charts/ec2awskubedbcom-vpcendpoint-editor/Chart.yaml +++ b/charts/ec2awskubedbcom-vpcendpoint-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ec2.aws.kubedb.com","version":"v1alpha1","resource":"vpcendpoints"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: VPCEndpoint Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: ec2awskubedbcom-vpcendpoint-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/ec2awskubedbcom-vpcendpoint-editor/README.md b/charts/ec2awskubedbcom-vpcendpoint-editor/README.md index e45a499d6e..31ecea7e16 100644 --- a/charts/ec2awskubedbcom-vpcendpoint-editor/README.md +++ b/charts/ec2awskubedbcom-vpcendpoint-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/ec2awskubedbcom-vpcendpoint-editor --version=v0.38.0 -$ helm upgrade -i ec2awskubedbcom-vpcendpoint-editor appscode/ec2awskubedbcom-vpcendpoint-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/ec2awskubedbcom-vpcendpoint-editor --version=v0.39.0 +$ helm upgrade -i ec2awskubedbcom-vpcendpoint-editor appscode/ec2awskubedbcom-vpcendpoint-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VPCEndpoint Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `ec2awskubedbcom-vpcendpoint-editor`: ```bash -$ helm upgrade -i ec2awskubedbcom-vpcendpoint-editor appscode/ec2awskubedbcom-vpcendpoint-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i ec2awskubedbcom-vpcendpoint-editor appscode/ec2awskubedbcom-vpcendpoint-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a VPCEndpoint Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `ec2awskubedbcom-vp Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-vpcendpoint-editor appscode/ec2awskubedbcom-vpcendpoint-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 +$ helm upgrade -i ec2awskubedbcom-vpcendpoint-editor appscode/ec2awskubedbcom-vpcendpoint-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-vpcendpoint-editor appscode/ec2awskubedbcom-vpcendpoint-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i ec2awskubedbcom-vpcendpoint-editor appscode/ec2awskubedbcom-vpcendpoint-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/ec2awskubedbcom-vpcpeeringconnection-editor/Chart.yaml b/charts/ec2awskubedbcom-vpcpeeringconnection-editor/Chart.yaml index 1299bc0d0f..774bc8ddf6 100644 --- a/charts/ec2awskubedbcom-vpcpeeringconnection-editor/Chart.yaml +++ b/charts/ec2awskubedbcom-vpcpeeringconnection-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ec2.aws.kubedb.com","version":"v1alpha1","resource":"vpcpeeringconnections"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: VPCPeeringConnection Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: ec2awskubedbcom-vpcpeeringconnection-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/ec2awskubedbcom-vpcpeeringconnection-editor/README.md b/charts/ec2awskubedbcom-vpcpeeringconnection-editor/README.md index 76c4d3de86..280ec13661 100644 --- a/charts/ec2awskubedbcom-vpcpeeringconnection-editor/README.md +++ b/charts/ec2awskubedbcom-vpcpeeringconnection-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/ec2awskubedbcom-vpcpeeringconnection-editor --version=v0.38.0 -$ helm upgrade -i ec2awskubedbcom-vpcpeeringconnection-editor appscode/ec2awskubedbcom-vpcpeeringconnection-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/ec2awskubedbcom-vpcpeeringconnection-editor --version=v0.39.0 +$ helm upgrade -i ec2awskubedbcom-vpcpeeringconnection-editor appscode/ec2awskubedbcom-vpcpeeringconnection-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VPCPeeringConnection Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `ec2awskubedbcom-vpcpeeringconnection-editor`: ```bash -$ helm upgrade -i ec2awskubedbcom-vpcpeeringconnection-editor appscode/ec2awskubedbcom-vpcpeeringconnection-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i ec2awskubedbcom-vpcpeeringconnection-editor appscode/ec2awskubedbcom-vpcpeeringconnection-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a VPCPeeringConnection Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `ec2awskubedbcom-vp Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-vpcpeeringconnection-editor appscode/ec2awskubedbcom-vpcpeeringconnection-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 +$ helm upgrade -i ec2awskubedbcom-vpcpeeringconnection-editor appscode/ec2awskubedbcom-vpcpeeringconnection-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-vpcpeeringconnection-editor appscode/ec2awskubedbcom-vpcpeeringconnection-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i ec2awskubedbcom-vpcpeeringconnection-editor appscode/ec2awskubedbcom-vpcpeeringconnection-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/elasticacheawskubedbcom-cluster-editor/Chart.yaml b/charts/elasticacheawskubedbcom-cluster-editor/Chart.yaml index 4386705590..7467a5ffef 100644 --- a/charts/elasticacheawskubedbcom-cluster-editor/Chart.yaml +++ b/charts/elasticacheawskubedbcom-cluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"elasticache.aws.kubedb.com","version":"v1alpha1","resource":"clusters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Cluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: elasticacheawskubedbcom-cluster-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/elasticacheawskubedbcom-cluster-editor/README.md b/charts/elasticacheawskubedbcom-cluster-editor/README.md index 51d943c76c..c67417ae6c 100644 --- a/charts/elasticacheawskubedbcom-cluster-editor/README.md +++ b/charts/elasticacheawskubedbcom-cluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/elasticacheawskubedbcom-cluster-editor --version=v0.38.0 -$ helm upgrade -i elasticacheawskubedbcom-cluster-editor appscode/elasticacheawskubedbcom-cluster-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/elasticacheawskubedbcom-cluster-editor --version=v0.39.0 +$ helm upgrade -i elasticacheawskubedbcom-cluster-editor appscode/elasticacheawskubedbcom-cluster-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Cluster Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `elasticacheawskubedbcom-cluster-editor`: ```bash -$ helm upgrade -i elasticacheawskubedbcom-cluster-editor appscode/elasticacheawskubedbcom-cluster-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i elasticacheawskubedbcom-cluster-editor appscode/elasticacheawskubedbcom-cluster-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Cluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `elasticacheawskube Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-cluster-editor appscode/elasticacheawskubedbcom-cluster-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 +$ helm upgrade -i elasticacheawskubedbcom-cluster-editor appscode/elasticacheawskubedbcom-cluster-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-cluster-editor appscode/elasticacheawskubedbcom-cluster-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i elasticacheawskubedbcom-cluster-editor appscode/elasticacheawskubedbcom-cluster-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/elasticacheawskubedbcom-parametergroup-editor/Chart.yaml b/charts/elasticacheawskubedbcom-parametergroup-editor/Chart.yaml index 5fae21aa62..e9f95459da 100644 --- a/charts/elasticacheawskubedbcom-parametergroup-editor/Chart.yaml +++ b/charts/elasticacheawskubedbcom-parametergroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"elasticache.aws.kubedb.com","version":"v1alpha1","resource":"parametergroups"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ParameterGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: elasticacheawskubedbcom-parametergroup-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/elasticacheawskubedbcom-parametergroup-editor/README.md b/charts/elasticacheawskubedbcom-parametergroup-editor/README.md index 704d340405..eab4c6235e 100644 --- a/charts/elasticacheawskubedbcom-parametergroup-editor/README.md +++ b/charts/elasticacheawskubedbcom-parametergroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/elasticacheawskubedbcom-parametergroup-editor --version=v0.38.0 -$ helm upgrade -i elasticacheawskubedbcom-parametergroup-editor appscode/elasticacheawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/elasticacheawskubedbcom-parametergroup-editor --version=v0.39.0 +$ helm upgrade -i elasticacheawskubedbcom-parametergroup-editor appscode/elasticacheawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ParameterGroup Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `elasticacheawskubedbcom-parametergroup-editor`: ```bash -$ helm upgrade -i elasticacheawskubedbcom-parametergroup-editor appscode/elasticacheawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i elasticacheawskubedbcom-parametergroup-editor appscode/elasticacheawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ParameterGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `elasticacheawskube Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-parametergroup-editor appscode/elasticacheawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 +$ helm upgrade -i elasticacheawskubedbcom-parametergroup-editor appscode/elasticacheawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-parametergroup-editor appscode/elasticacheawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i elasticacheawskubedbcom-parametergroup-editor appscode/elasticacheawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/elasticacheawskubedbcom-replicationgroup-editor/Chart.yaml b/charts/elasticacheawskubedbcom-replicationgroup-editor/Chart.yaml index acaede8721..02811a7b98 100644 --- a/charts/elasticacheawskubedbcom-replicationgroup-editor/Chart.yaml +++ b/charts/elasticacheawskubedbcom-replicationgroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"elasticache.aws.kubedb.com","version":"v1alpha1","resource":"replicationgroups"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ReplicationGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: elasticacheawskubedbcom-replicationgroup-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/elasticacheawskubedbcom-replicationgroup-editor/README.md b/charts/elasticacheawskubedbcom-replicationgroup-editor/README.md index 28de355138..e4da037bf8 100644 --- a/charts/elasticacheawskubedbcom-replicationgroup-editor/README.md +++ b/charts/elasticacheawskubedbcom-replicationgroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/elasticacheawskubedbcom-replicationgroup-editor --version=v0.38.0 -$ helm upgrade -i elasticacheawskubedbcom-replicationgroup-editor appscode/elasticacheawskubedbcom-replicationgroup-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/elasticacheawskubedbcom-replicationgroup-editor --version=v0.39.0 +$ helm upgrade -i elasticacheawskubedbcom-replicationgroup-editor appscode/elasticacheawskubedbcom-replicationgroup-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ReplicationGroup Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `elasticacheawskubedbcom-replicationgroup-editor`: ```bash -$ helm upgrade -i elasticacheawskubedbcom-replicationgroup-editor appscode/elasticacheawskubedbcom-replicationgroup-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i elasticacheawskubedbcom-replicationgroup-editor appscode/elasticacheawskubedbcom-replicationgroup-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ReplicationGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `elasticacheawskube Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-replicationgroup-editor appscode/elasticacheawskubedbcom-replicationgroup-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 +$ helm upgrade -i elasticacheawskubedbcom-replicationgroup-editor appscode/elasticacheawskubedbcom-replicationgroup-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-replicationgroup-editor appscode/elasticacheawskubedbcom-replicationgroup-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i elasticacheawskubedbcom-replicationgroup-editor appscode/elasticacheawskubedbcom-replicationgroup-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/elasticacheawskubedbcom-subnetgroup-editor/Chart.yaml b/charts/elasticacheawskubedbcom-subnetgroup-editor/Chart.yaml index ccc0d8a8af..1aa1e4b002 100644 --- a/charts/elasticacheawskubedbcom-subnetgroup-editor/Chart.yaml +++ b/charts/elasticacheawskubedbcom-subnetgroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"elasticache.aws.kubedb.com","version":"v1alpha1","resource":"subnetgroups"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SubnetGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: elasticacheawskubedbcom-subnetgroup-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/elasticacheawskubedbcom-subnetgroup-editor/README.md b/charts/elasticacheawskubedbcom-subnetgroup-editor/README.md index b6d507aa8a..f2340692d8 100644 --- a/charts/elasticacheawskubedbcom-subnetgroup-editor/README.md +++ b/charts/elasticacheawskubedbcom-subnetgroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/elasticacheawskubedbcom-subnetgroup-editor --version=v0.38.0 -$ helm upgrade -i elasticacheawskubedbcom-subnetgroup-editor appscode/elasticacheawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/elasticacheawskubedbcom-subnetgroup-editor --version=v0.39.0 +$ helm upgrade -i elasticacheawskubedbcom-subnetgroup-editor appscode/elasticacheawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SubnetGroup Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `elasticacheawskubedbcom-subnetgroup-editor`: ```bash -$ helm upgrade -i elasticacheawskubedbcom-subnetgroup-editor appscode/elasticacheawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i elasticacheawskubedbcom-subnetgroup-editor appscode/elasticacheawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SubnetGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `elasticacheawskube Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-subnetgroup-editor appscode/elasticacheawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 +$ helm upgrade -i elasticacheawskubedbcom-subnetgroup-editor appscode/elasticacheawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-subnetgroup-editor appscode/elasticacheawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i elasticacheawskubedbcom-subnetgroup-editor appscode/elasticacheawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/elasticacheawskubedbcom-user-editor/Chart.yaml b/charts/elasticacheawskubedbcom-user-editor/Chart.yaml index 2644d0346f..6ba9ddd384 100644 --- a/charts/elasticacheawskubedbcom-user-editor/Chart.yaml +++ b/charts/elasticacheawskubedbcom-user-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"elasticache.aws.kubedb.com","version":"v1alpha1","resource":"users"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: User Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: elasticacheawskubedbcom-user-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/elasticacheawskubedbcom-user-editor/README.md b/charts/elasticacheawskubedbcom-user-editor/README.md index 6fa2d3d418..b1ca563e05 100644 --- a/charts/elasticacheawskubedbcom-user-editor/README.md +++ b/charts/elasticacheawskubedbcom-user-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/elasticacheawskubedbcom-user-editor --version=v0.38.0 -$ helm upgrade -i elasticacheawskubedbcom-user-editor appscode/elasticacheawskubedbcom-user-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/elasticacheawskubedbcom-user-editor --version=v0.39.0 +$ helm upgrade -i elasticacheawskubedbcom-user-editor appscode/elasticacheawskubedbcom-user-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a User Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `elasticacheawskubedbcom-user-editor`: ```bash -$ helm upgrade -i elasticacheawskubedbcom-user-editor appscode/elasticacheawskubedbcom-user-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i elasticacheawskubedbcom-user-editor appscode/elasticacheawskubedbcom-user-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a User Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `elasticacheawskube Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-user-editor appscode/elasticacheawskubedbcom-user-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 +$ helm upgrade -i elasticacheawskubedbcom-user-editor appscode/elasticacheawskubedbcom-user-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-user-editor appscode/elasticacheawskubedbcom-user-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i elasticacheawskubedbcom-user-editor appscode/elasticacheawskubedbcom-user-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/elasticacheawskubedbcom-usergroup-editor/Chart.yaml b/charts/elasticacheawskubedbcom-usergroup-editor/Chart.yaml index 4b21772fc3..e3b58553ef 100644 --- a/charts/elasticacheawskubedbcom-usergroup-editor/Chart.yaml +++ b/charts/elasticacheawskubedbcom-usergroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"elasticache.aws.kubedb.com","version":"v1alpha1","resource":"usergroups"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: UserGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: elasticacheawskubedbcom-usergroup-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/elasticacheawskubedbcom-usergroup-editor/README.md b/charts/elasticacheawskubedbcom-usergroup-editor/README.md index f1ee8a716c..7231c2fcf5 100644 --- a/charts/elasticacheawskubedbcom-usergroup-editor/README.md +++ b/charts/elasticacheawskubedbcom-usergroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/elasticacheawskubedbcom-usergroup-editor --version=v0.38.0 -$ helm upgrade -i elasticacheawskubedbcom-usergroup-editor appscode/elasticacheawskubedbcom-usergroup-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/elasticacheawskubedbcom-usergroup-editor --version=v0.39.0 +$ helm upgrade -i elasticacheawskubedbcom-usergroup-editor appscode/elasticacheawskubedbcom-usergroup-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a UserGroup Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `elasticacheawskubedbcom-usergroup-editor`: ```bash -$ helm upgrade -i elasticacheawskubedbcom-usergroup-editor appscode/elasticacheawskubedbcom-usergroup-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i elasticacheawskubedbcom-usergroup-editor appscode/elasticacheawskubedbcom-usergroup-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a UserGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `elasticacheawskube Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-usergroup-editor appscode/elasticacheawskubedbcom-usergroup-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 +$ helm upgrade -i elasticacheawskubedbcom-usergroup-editor appscode/elasticacheawskubedbcom-usergroup-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-usergroup-editor appscode/elasticacheawskubedbcom-usergroup-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i elasticacheawskubedbcom-usergroup-editor appscode/elasticacheawskubedbcom-usergroup-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/elasticsearchawskubedbcom-domain-editor/Chart.yaml b/charts/elasticsearchawskubedbcom-domain-editor/Chart.yaml index 5a916e5fb7..a21b59e82b 100644 --- a/charts/elasticsearchawskubedbcom-domain-editor/Chart.yaml +++ b/charts/elasticsearchawskubedbcom-domain-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"elasticsearch.aws.kubedb.com","version":"v1alpha1","resource":"domains"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Domain Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: elasticsearchawskubedbcom-domain-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/elasticsearchawskubedbcom-domain-editor/README.md b/charts/elasticsearchawskubedbcom-domain-editor/README.md index 926ffbb2fa..ffc22ffca7 100644 --- a/charts/elasticsearchawskubedbcom-domain-editor/README.md +++ b/charts/elasticsearchawskubedbcom-domain-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/elasticsearchawskubedbcom-domain-editor --version=v0.38.0 -$ helm upgrade -i elasticsearchawskubedbcom-domain-editor appscode/elasticsearchawskubedbcom-domain-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/elasticsearchawskubedbcom-domain-editor --version=v0.39.0 +$ helm upgrade -i elasticsearchawskubedbcom-domain-editor appscode/elasticsearchawskubedbcom-domain-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Domain Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `elasticsearchawskubedbcom-domain-editor`: ```bash -$ helm upgrade -i elasticsearchawskubedbcom-domain-editor appscode/elasticsearchawskubedbcom-domain-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i elasticsearchawskubedbcom-domain-editor appscode/elasticsearchawskubedbcom-domain-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Domain Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `elasticsearchawsku Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i elasticsearchawskubedbcom-domain-editor appscode/elasticsearchawskubedbcom-domain-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=elasticsearch.aws.kubedb.com/v1alpha1 +$ helm upgrade -i elasticsearchawskubedbcom-domain-editor appscode/elasticsearchawskubedbcom-domain-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=elasticsearch.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i elasticsearchawskubedbcom-domain-editor appscode/elasticsearchawskubedbcom-domain-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i elasticsearchawskubedbcom-domain-editor appscode/elasticsearchawskubedbcom-domain-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/elasticsearchawskubedbcom-domainpolicy-editor/Chart.yaml b/charts/elasticsearchawskubedbcom-domainpolicy-editor/Chart.yaml index 6cd499117b..d3176425e2 100644 --- a/charts/elasticsearchawskubedbcom-domainpolicy-editor/Chart.yaml +++ b/charts/elasticsearchawskubedbcom-domainpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"elasticsearch.aws.kubedb.com","version":"v1alpha1","resource":"domainpolicies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DomainPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: elasticsearchawskubedbcom-domainpolicy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/elasticsearchawskubedbcom-domainpolicy-editor/README.md b/charts/elasticsearchawskubedbcom-domainpolicy-editor/README.md index 42ee52c88c..19673179b6 100644 --- a/charts/elasticsearchawskubedbcom-domainpolicy-editor/README.md +++ b/charts/elasticsearchawskubedbcom-domainpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/elasticsearchawskubedbcom-domainpolicy-editor --version=v0.38.0 -$ helm upgrade -i elasticsearchawskubedbcom-domainpolicy-editor appscode/elasticsearchawskubedbcom-domainpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/elasticsearchawskubedbcom-domainpolicy-editor --version=v0.39.0 +$ helm upgrade -i elasticsearchawskubedbcom-domainpolicy-editor appscode/elasticsearchawskubedbcom-domainpolicy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DomainPolicy Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `elasticsearchawskubedbcom-domainpolicy-editor`: ```bash -$ helm upgrade -i elasticsearchawskubedbcom-domainpolicy-editor appscode/elasticsearchawskubedbcom-domainpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i elasticsearchawskubedbcom-domainpolicy-editor appscode/elasticsearchawskubedbcom-domainpolicy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DomainPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `elasticsearchawsku Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i elasticsearchawskubedbcom-domainpolicy-editor appscode/elasticsearchawskubedbcom-domainpolicy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=elasticsearch.aws.kubedb.com/v1alpha1 +$ helm upgrade -i elasticsearchawskubedbcom-domainpolicy-editor appscode/elasticsearchawskubedbcom-domainpolicy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=elasticsearch.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i elasticsearchawskubedbcom-domainpolicy-editor appscode/elasticsearchawskubedbcom-domainpolicy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i elasticsearchawskubedbcom-domainpolicy-editor appscode/elasticsearchawskubedbcom-domainpolicy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/elasticsearchawskubedbcom-domainsamloptions-editor/Chart.yaml b/charts/elasticsearchawskubedbcom-domainsamloptions-editor/Chart.yaml index 5f3d7c4d5a..89f6db396d 100644 --- a/charts/elasticsearchawskubedbcom-domainsamloptions-editor/Chart.yaml +++ b/charts/elasticsearchawskubedbcom-domainsamloptions-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"elasticsearch.aws.kubedb.com","version":"v1alpha1","resource":"domainsamloptions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DomainSAMLOptions Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: elasticsearchawskubedbcom-domainsamloptions-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/elasticsearchawskubedbcom-domainsamloptions-editor/README.md b/charts/elasticsearchawskubedbcom-domainsamloptions-editor/README.md index 1d62eb2e41..2da24e7483 100644 --- a/charts/elasticsearchawskubedbcom-domainsamloptions-editor/README.md +++ b/charts/elasticsearchawskubedbcom-domainsamloptions-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/elasticsearchawskubedbcom-domainsamloptions-editor --version=v0.38.0 -$ helm upgrade -i elasticsearchawskubedbcom-domainsamloptions-editor appscode/elasticsearchawskubedbcom-domainsamloptions-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/elasticsearchawskubedbcom-domainsamloptions-editor --version=v0.39.0 +$ helm upgrade -i elasticsearchawskubedbcom-domainsamloptions-editor appscode/elasticsearchawskubedbcom-domainsamloptions-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DomainSAMLOptions Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `elasticsearchawskubedbcom-domainsamloptions-editor`: ```bash -$ helm upgrade -i elasticsearchawskubedbcom-domainsamloptions-editor appscode/elasticsearchawskubedbcom-domainsamloptions-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i elasticsearchawskubedbcom-domainsamloptions-editor appscode/elasticsearchawskubedbcom-domainsamloptions-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DomainSAMLOptions Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `elasticsearchawsku Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i elasticsearchawskubedbcom-domainsamloptions-editor appscode/elasticsearchawskubedbcom-domainsamloptions-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=elasticsearch.aws.kubedb.com/v1alpha1 +$ helm upgrade -i elasticsearchawskubedbcom-domainsamloptions-editor appscode/elasticsearchawskubedbcom-domainsamloptions-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=elasticsearch.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i elasticsearchawskubedbcom-domainsamloptions-editor appscode/elasticsearchawskubedbcom-domainsamloptions-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i elasticsearchawskubedbcom-domainsamloptions-editor appscode/elasticsearchawskubedbcom-domainsamloptions-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/elasticsearchkubedbcom-elasticsearchdashboard-editor/Chart.yaml b/charts/elasticsearchkubedbcom-elasticsearchdashboard-editor/Chart.yaml index 2102f38139..f31277ca3e 100644 --- a/charts/elasticsearchkubedbcom-elasticsearchdashboard-editor/Chart.yaml +++ b/charts/elasticsearchkubedbcom-elasticsearchdashboard-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"elasticsearch.kubedb.com","version":"v1alpha1","resource":"elasticsearchdashboards"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ElasticsearchDashboard Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: elasticsearchkubedbcom-elasticsearchdashboard-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/elasticsearchkubedbcom-elasticsearchdashboard-editor/README.md b/charts/elasticsearchkubedbcom-elasticsearchdashboard-editor/README.md index 8563185a02..8056df325a 100644 --- a/charts/elasticsearchkubedbcom-elasticsearchdashboard-editor/README.md +++ b/charts/elasticsearchkubedbcom-elasticsearchdashboard-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/elasticsearchkubedbcom-elasticsearchdashboard-editor --version=v0.38.0 -$ helm upgrade -i elasticsearchkubedbcom-elasticsearchdashboard-editor appscode/elasticsearchkubedbcom-elasticsearchdashboard-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/elasticsearchkubedbcom-elasticsearchdashboard-editor --version=v0.39.0 +$ helm upgrade -i elasticsearchkubedbcom-elasticsearchdashboard-editor appscode/elasticsearchkubedbcom-elasticsearchdashboard-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ElasticsearchDashboard Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `elasticsearchkubedbcom-elasticsearchdashboard-editor`: ```bash -$ helm upgrade -i elasticsearchkubedbcom-elasticsearchdashboard-editor appscode/elasticsearchkubedbcom-elasticsearchdashboard-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i elasticsearchkubedbcom-elasticsearchdashboard-editor appscode/elasticsearchkubedbcom-elasticsearchdashboard-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ElasticsearchDashboard Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `elasticsearchkubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i elasticsearchkubedbcom-elasticsearchdashboard-editor appscode/elasticsearchkubedbcom-elasticsearchdashboard-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=elasticsearch.kubedb.com/v1alpha1 +$ helm upgrade -i elasticsearchkubedbcom-elasticsearchdashboard-editor appscode/elasticsearchkubedbcom-elasticsearchdashboard-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=elasticsearch.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i elasticsearchkubedbcom-elasticsearchdashboard-editor appscode/elasticsearchkubedbcom-elasticsearchdashboard-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i elasticsearchkubedbcom-elasticsearchdashboard-editor appscode/elasticsearchkubedbcom-elasticsearchdashboard-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-awsrole-editor/Chart.yaml b/charts/enginekubevaultcom-awsrole-editor/Chart.yaml index 8dca2b1889..b43128faaf 100644 --- a/charts/enginekubevaultcom-awsrole-editor/Chart.yaml +++ b/charts/enginekubevaultcom-awsrole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"awsroles"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AWSRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-awsrole-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/enginekubevaultcom-awsrole-editor/README.md b/charts/enginekubevaultcom-awsrole-editor/README.md index 2e86308159..a5f8492ebf 100644 --- a/charts/enginekubevaultcom-awsrole-editor/README.md +++ b/charts/enginekubevaultcom-awsrole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-awsrole-editor --version=v0.38.0 -$ helm upgrade -i enginekubevaultcom-awsrole-editor appscode/enginekubevaultcom-awsrole-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/enginekubevaultcom-awsrole-editor --version=v0.39.0 +$ helm upgrade -i enginekubevaultcom-awsrole-editor appscode/enginekubevaultcom-awsrole-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSRole Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `enginekubevaultcom-awsrole-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-awsrole-editor appscode/enginekubevaultcom-awsrole-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i enginekubevaultcom-awsrole-editor appscode/enginekubevaultcom-awsrole-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AWSRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-awsrole-editor appscode/enginekubevaultcom-awsrole-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-awsrole-editor appscode/enginekubevaultcom-awsrole-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-awsrole-editor appscode/enginekubevaultcom-awsrole-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-awsrole-editor appscode/enginekubevaultcom-awsrole-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-azurerole-editor/Chart.yaml b/charts/enginekubevaultcom-azurerole-editor/Chart.yaml index 46ae52ed2a..17b4b625dc 100644 --- a/charts/enginekubevaultcom-azurerole-editor/Chart.yaml +++ b/charts/enginekubevaultcom-azurerole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"azureroles"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-azurerole-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/enginekubevaultcom-azurerole-editor/README.md b/charts/enginekubevaultcom-azurerole-editor/README.md index 5cab9d234d..b156a66704 100644 --- a/charts/enginekubevaultcom-azurerole-editor/README.md +++ b/charts/enginekubevaultcom-azurerole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-azurerole-editor --version=v0.38.0 -$ helm upgrade -i enginekubevaultcom-azurerole-editor appscode/enginekubevaultcom-azurerole-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/enginekubevaultcom-azurerole-editor --version=v0.39.0 +$ helm upgrade -i enginekubevaultcom-azurerole-editor appscode/enginekubevaultcom-azurerole-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureRole Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `enginekubevaultcom-azurerole-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-azurerole-editor appscode/enginekubevaultcom-azurerole-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i enginekubevaultcom-azurerole-editor appscode/enginekubevaultcom-azurerole-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-azurerole-editor appscode/enginekubevaultcom-azurerole-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-azurerole-editor appscode/enginekubevaultcom-azurerole-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-azurerole-editor appscode/enginekubevaultcom-azurerole-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-azurerole-editor appscode/enginekubevaultcom-azurerole-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-elasticsearchrole-editor/Chart.yaml b/charts/enginekubevaultcom-elasticsearchrole-editor/Chart.yaml index 810d556b06..9bea89eee3 100644 --- a/charts/enginekubevaultcom-elasticsearchrole-editor/Chart.yaml +++ b/charts/enginekubevaultcom-elasticsearchrole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"elasticsearchroles"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ElasticsearchRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-elasticsearchrole-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/enginekubevaultcom-elasticsearchrole-editor/README.md b/charts/enginekubevaultcom-elasticsearchrole-editor/README.md index 51cc3c92b0..a791113067 100644 --- a/charts/enginekubevaultcom-elasticsearchrole-editor/README.md +++ b/charts/enginekubevaultcom-elasticsearchrole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-elasticsearchrole-editor --version=v0.38.0 -$ helm upgrade -i enginekubevaultcom-elasticsearchrole-editor appscode/enginekubevaultcom-elasticsearchrole-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/enginekubevaultcom-elasticsearchrole-editor --version=v0.39.0 +$ helm upgrade -i enginekubevaultcom-elasticsearchrole-editor appscode/enginekubevaultcom-elasticsearchrole-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ElasticsearchRole Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `enginekubevaultcom-elasticsearchrole-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-elasticsearchrole-editor appscode/enginekubevaultcom-elasticsearchrole-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i enginekubevaultcom-elasticsearchrole-editor appscode/enginekubevaultcom-elasticsearchrole-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ElasticsearchRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-elasticsearchrole-editor appscode/enginekubevaultcom-elasticsearchrole-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-elasticsearchrole-editor appscode/enginekubevaultcom-elasticsearchrole-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-elasticsearchrole-editor appscode/enginekubevaultcom-elasticsearchrole-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-elasticsearchrole-editor appscode/enginekubevaultcom-elasticsearchrole-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-gcprole-editor/Chart.yaml b/charts/enginekubevaultcom-gcprole-editor/Chart.yaml index d93ecb42ef..65ed5db615 100644 --- a/charts/enginekubevaultcom-gcprole-editor/Chart.yaml +++ b/charts/enginekubevaultcom-gcprole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"gcproles"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GCPRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-gcprole-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/enginekubevaultcom-gcprole-editor/README.md b/charts/enginekubevaultcom-gcprole-editor/README.md index 2ab12aaddb..a9f9341538 100644 --- a/charts/enginekubevaultcom-gcprole-editor/README.md +++ b/charts/enginekubevaultcom-gcprole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-gcprole-editor --version=v0.38.0 -$ helm upgrade -i enginekubevaultcom-gcprole-editor appscode/enginekubevaultcom-gcprole-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/enginekubevaultcom-gcprole-editor --version=v0.39.0 +$ helm upgrade -i enginekubevaultcom-gcprole-editor appscode/enginekubevaultcom-gcprole-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GCPRole Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `enginekubevaultcom-gcprole-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-gcprole-editor appscode/enginekubevaultcom-gcprole-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i enginekubevaultcom-gcprole-editor appscode/enginekubevaultcom-gcprole-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GCPRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-gcprole-editor appscode/enginekubevaultcom-gcprole-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-gcprole-editor appscode/enginekubevaultcom-gcprole-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-gcprole-editor appscode/enginekubevaultcom-gcprole-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-gcprole-editor appscode/enginekubevaultcom-gcprole-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-mariadbrole-editor/Chart.yaml b/charts/enginekubevaultcom-mariadbrole-editor/Chart.yaml index 23ec66480b..75d627761a 100644 --- a/charts/enginekubevaultcom-mariadbrole-editor/Chart.yaml +++ b/charts/enginekubevaultcom-mariadbrole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"mariadbroles"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MariaDBRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-mariadbrole-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/enginekubevaultcom-mariadbrole-editor/README.md b/charts/enginekubevaultcom-mariadbrole-editor/README.md index 450127564f..67c06fd69d 100644 --- a/charts/enginekubevaultcom-mariadbrole-editor/README.md +++ b/charts/enginekubevaultcom-mariadbrole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-mariadbrole-editor --version=v0.38.0 -$ helm upgrade -i enginekubevaultcom-mariadbrole-editor appscode/enginekubevaultcom-mariadbrole-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/enginekubevaultcom-mariadbrole-editor --version=v0.39.0 +$ helm upgrade -i enginekubevaultcom-mariadbrole-editor appscode/enginekubevaultcom-mariadbrole-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBRole Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `enginekubevaultcom-mariadbrole-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-mariadbrole-editor appscode/enginekubevaultcom-mariadbrole-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i enginekubevaultcom-mariadbrole-editor appscode/enginekubevaultcom-mariadbrole-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MariaDBRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-mariadbrole-editor appscode/enginekubevaultcom-mariadbrole-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-mariadbrole-editor appscode/enginekubevaultcom-mariadbrole-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-mariadbrole-editor appscode/enginekubevaultcom-mariadbrole-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-mariadbrole-editor appscode/enginekubevaultcom-mariadbrole-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-mongodbrole-editor/Chart.yaml b/charts/enginekubevaultcom-mongodbrole-editor/Chart.yaml index 854b1db40a..1b41835a60 100644 --- a/charts/enginekubevaultcom-mongodbrole-editor/Chart.yaml +++ b/charts/enginekubevaultcom-mongodbrole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"mongodbroles"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MongoDBRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-mongodbrole-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/enginekubevaultcom-mongodbrole-editor/README.md b/charts/enginekubevaultcom-mongodbrole-editor/README.md index ed478ad7c6..44d4369d79 100644 --- a/charts/enginekubevaultcom-mongodbrole-editor/README.md +++ b/charts/enginekubevaultcom-mongodbrole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-mongodbrole-editor --version=v0.38.0 -$ helm upgrade -i enginekubevaultcom-mongodbrole-editor appscode/enginekubevaultcom-mongodbrole-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/enginekubevaultcom-mongodbrole-editor --version=v0.39.0 +$ helm upgrade -i enginekubevaultcom-mongodbrole-editor appscode/enginekubevaultcom-mongodbrole-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBRole Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `enginekubevaultcom-mongodbrole-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-mongodbrole-editor appscode/enginekubevaultcom-mongodbrole-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i enginekubevaultcom-mongodbrole-editor appscode/enginekubevaultcom-mongodbrole-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MongoDBRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-mongodbrole-editor appscode/enginekubevaultcom-mongodbrole-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-mongodbrole-editor appscode/enginekubevaultcom-mongodbrole-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-mongodbrole-editor appscode/enginekubevaultcom-mongodbrole-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-mongodbrole-editor appscode/enginekubevaultcom-mongodbrole-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-mysqlrole-editor/Chart.yaml b/charts/enginekubevaultcom-mysqlrole-editor/Chart.yaml index b405ba29d3..d4a52ba996 100644 --- a/charts/enginekubevaultcom-mysqlrole-editor/Chart.yaml +++ b/charts/enginekubevaultcom-mysqlrole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"mysqlroles"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MySQLRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-mysqlrole-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/enginekubevaultcom-mysqlrole-editor/README.md b/charts/enginekubevaultcom-mysqlrole-editor/README.md index 4e6ad1c815..fb1af3c74d 100644 --- a/charts/enginekubevaultcom-mysqlrole-editor/README.md +++ b/charts/enginekubevaultcom-mysqlrole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-mysqlrole-editor --version=v0.38.0 -$ helm upgrade -i enginekubevaultcom-mysqlrole-editor appscode/enginekubevaultcom-mysqlrole-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/enginekubevaultcom-mysqlrole-editor --version=v0.39.0 +$ helm upgrade -i enginekubevaultcom-mysqlrole-editor appscode/enginekubevaultcom-mysqlrole-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLRole Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `enginekubevaultcom-mysqlrole-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-mysqlrole-editor appscode/enginekubevaultcom-mysqlrole-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i enginekubevaultcom-mysqlrole-editor appscode/enginekubevaultcom-mysqlrole-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MySQLRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-mysqlrole-editor appscode/enginekubevaultcom-mysqlrole-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-mysqlrole-editor appscode/enginekubevaultcom-mysqlrole-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-mysqlrole-editor appscode/enginekubevaultcom-mysqlrole-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-mysqlrole-editor appscode/enginekubevaultcom-mysqlrole-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-pkirole-editor/Chart.yaml b/charts/enginekubevaultcom-pkirole-editor/Chart.yaml index 399f47d3ba..ab217436cc 100644 --- a/charts/enginekubevaultcom-pkirole-editor/Chart.yaml +++ b/charts/enginekubevaultcom-pkirole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"pkiroles"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PKIRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-pkirole-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/enginekubevaultcom-pkirole-editor/README.md b/charts/enginekubevaultcom-pkirole-editor/README.md index 120ba5289b..4ede780c75 100644 --- a/charts/enginekubevaultcom-pkirole-editor/README.md +++ b/charts/enginekubevaultcom-pkirole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-pkirole-editor --version=v0.38.0 -$ helm upgrade -i enginekubevaultcom-pkirole-editor appscode/enginekubevaultcom-pkirole-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/enginekubevaultcom-pkirole-editor --version=v0.39.0 +$ helm upgrade -i enginekubevaultcom-pkirole-editor appscode/enginekubevaultcom-pkirole-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PKIRole Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `enginekubevaultcom-pkirole-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-pkirole-editor appscode/enginekubevaultcom-pkirole-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i enginekubevaultcom-pkirole-editor appscode/enginekubevaultcom-pkirole-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PKIRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-pkirole-editor appscode/enginekubevaultcom-pkirole-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-pkirole-editor appscode/enginekubevaultcom-pkirole-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-pkirole-editor appscode/enginekubevaultcom-pkirole-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-pkirole-editor appscode/enginekubevaultcom-pkirole-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-postgresrole-editor/Chart.yaml b/charts/enginekubevaultcom-postgresrole-editor/Chart.yaml index ce0567005f..1565f80440 100644 --- a/charts/enginekubevaultcom-postgresrole-editor/Chart.yaml +++ b/charts/enginekubevaultcom-postgresrole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"postgresroles"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PostgresRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-postgresrole-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/enginekubevaultcom-postgresrole-editor/README.md b/charts/enginekubevaultcom-postgresrole-editor/README.md index 9d95cbc2d8..dacca130b3 100644 --- a/charts/enginekubevaultcom-postgresrole-editor/README.md +++ b/charts/enginekubevaultcom-postgresrole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-postgresrole-editor --version=v0.38.0 -$ helm upgrade -i enginekubevaultcom-postgresrole-editor appscode/enginekubevaultcom-postgresrole-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/enginekubevaultcom-postgresrole-editor --version=v0.39.0 +$ helm upgrade -i enginekubevaultcom-postgresrole-editor appscode/enginekubevaultcom-postgresrole-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresRole Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `enginekubevaultcom-postgresrole-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-postgresrole-editor appscode/enginekubevaultcom-postgresrole-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i enginekubevaultcom-postgresrole-editor appscode/enginekubevaultcom-postgresrole-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PostgresRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-postgresrole-editor appscode/enginekubevaultcom-postgresrole-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-postgresrole-editor appscode/enginekubevaultcom-postgresrole-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-postgresrole-editor appscode/enginekubevaultcom-postgresrole-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-postgresrole-editor appscode/enginekubevaultcom-postgresrole-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-redisrole-editor/Chart.yaml b/charts/enginekubevaultcom-redisrole-editor/Chart.yaml index af3b16d0a3..f2e9dc4ba4 100644 --- a/charts/enginekubevaultcom-redisrole-editor/Chart.yaml +++ b/charts/enginekubevaultcom-redisrole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"redisroles"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RedisRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-redisrole-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/enginekubevaultcom-redisrole-editor/README.md b/charts/enginekubevaultcom-redisrole-editor/README.md index 0b856204ac..507b31ef70 100644 --- a/charts/enginekubevaultcom-redisrole-editor/README.md +++ b/charts/enginekubevaultcom-redisrole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-redisrole-editor --version=v0.38.0 -$ helm upgrade -i enginekubevaultcom-redisrole-editor appscode/enginekubevaultcom-redisrole-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/enginekubevaultcom-redisrole-editor --version=v0.39.0 +$ helm upgrade -i enginekubevaultcom-redisrole-editor appscode/enginekubevaultcom-redisrole-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisRole Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `enginekubevaultcom-redisrole-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-redisrole-editor appscode/enginekubevaultcom-redisrole-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i enginekubevaultcom-redisrole-editor appscode/enginekubevaultcom-redisrole-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RedisRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-redisrole-editor appscode/enginekubevaultcom-redisrole-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-redisrole-editor appscode/enginekubevaultcom-redisrole-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-redisrole-editor appscode/enginekubevaultcom-redisrole-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-redisrole-editor appscode/enginekubevaultcom-redisrole-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-secretaccessrequest-editor/Chart.yaml b/charts/enginekubevaultcom-secretaccessrequest-editor/Chart.yaml index be6139fc88..8f1f9b88e8 100644 --- a/charts/enginekubevaultcom-secretaccessrequest-editor/Chart.yaml +++ b/charts/enginekubevaultcom-secretaccessrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"secretaccessrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SecretAccessRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-secretaccessrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/enginekubevaultcom-secretaccessrequest-editor/README.md b/charts/enginekubevaultcom-secretaccessrequest-editor/README.md index 64293a4d52..d56874c8d4 100644 --- a/charts/enginekubevaultcom-secretaccessrequest-editor/README.md +++ b/charts/enginekubevaultcom-secretaccessrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-secretaccessrequest-editor --version=v0.38.0 -$ helm upgrade -i enginekubevaultcom-secretaccessrequest-editor appscode/enginekubevaultcom-secretaccessrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/enginekubevaultcom-secretaccessrequest-editor --version=v0.39.0 +$ helm upgrade -i enginekubevaultcom-secretaccessrequest-editor appscode/enginekubevaultcom-secretaccessrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecretAccessRequest Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `enginekubevaultcom-secretaccessrequest-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-secretaccessrequest-editor appscode/enginekubevaultcom-secretaccessrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i enginekubevaultcom-secretaccessrequest-editor appscode/enginekubevaultcom-secretaccessrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SecretAccessRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-secretaccessrequest-editor appscode/enginekubevaultcom-secretaccessrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-secretaccessrequest-editor appscode/enginekubevaultcom-secretaccessrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-secretaccessrequest-editor appscode/enginekubevaultcom-secretaccessrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-secretaccessrequest-editor appscode/enginekubevaultcom-secretaccessrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-secretengine-editor/Chart.yaml b/charts/enginekubevaultcom-secretengine-editor/Chart.yaml index b1ec12b20f..efc2915f7e 100644 --- a/charts/enginekubevaultcom-secretengine-editor/Chart.yaml +++ b/charts/enginekubevaultcom-secretengine-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"secretengines"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SecretEngine Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-secretengine-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/enginekubevaultcom-secretengine-editor/README.md b/charts/enginekubevaultcom-secretengine-editor/README.md index 73835bcc51..9cdbaf54b3 100644 --- a/charts/enginekubevaultcom-secretengine-editor/README.md +++ b/charts/enginekubevaultcom-secretengine-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-secretengine-editor --version=v0.38.0 -$ helm upgrade -i enginekubevaultcom-secretengine-editor appscode/enginekubevaultcom-secretengine-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/enginekubevaultcom-secretengine-editor --version=v0.39.0 +$ helm upgrade -i enginekubevaultcom-secretengine-editor appscode/enginekubevaultcom-secretengine-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecretEngine Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `enginekubevaultcom-secretengine-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-secretengine-editor appscode/enginekubevaultcom-secretengine-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i enginekubevaultcom-secretengine-editor appscode/enginekubevaultcom-secretengine-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SecretEngine Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-secretengine-editor appscode/enginekubevaultcom-secretengine-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-secretengine-editor appscode/enginekubevaultcom-secretengine-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-secretengine-editor appscode/enginekubevaultcom-secretengine-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-secretengine-editor appscode/enginekubevaultcom-secretengine-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-secretrolebinding-editor/Chart.yaml b/charts/enginekubevaultcom-secretrolebinding-editor/Chart.yaml index 3b3c771c81..8e17419474 100644 --- a/charts/enginekubevaultcom-secretrolebinding-editor/Chart.yaml +++ b/charts/enginekubevaultcom-secretrolebinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"secretrolebindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SecretRoleBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-secretrolebinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/enginekubevaultcom-secretrolebinding-editor/README.md b/charts/enginekubevaultcom-secretrolebinding-editor/README.md index b1cf4a9be9..61bc30ae9f 100644 --- a/charts/enginekubevaultcom-secretrolebinding-editor/README.md +++ b/charts/enginekubevaultcom-secretrolebinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-secretrolebinding-editor --version=v0.38.0 -$ helm upgrade -i enginekubevaultcom-secretrolebinding-editor appscode/enginekubevaultcom-secretrolebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/enginekubevaultcom-secretrolebinding-editor --version=v0.39.0 +$ helm upgrade -i enginekubevaultcom-secretrolebinding-editor appscode/enginekubevaultcom-secretrolebinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecretRoleBinding Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `enginekubevaultcom-secretrolebinding-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-secretrolebinding-editor appscode/enginekubevaultcom-secretrolebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i enginekubevaultcom-secretrolebinding-editor appscode/enginekubevaultcom-secretrolebinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SecretRoleBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-secretrolebinding-editor appscode/enginekubevaultcom-secretrolebinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-secretrolebinding-editor appscode/enginekubevaultcom-secretrolebinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-secretrolebinding-editor appscode/enginekubevaultcom-secretrolebinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-secretrolebinding-editor appscode/enginekubevaultcom-secretrolebinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/eventsk8sio-event-editor/Chart.yaml b/charts/eventsk8sio-event-editor/Chart.yaml index 58e69d0ff8..6753aa6380 100644 --- a/charts/eventsk8sio-event-editor/Chart.yaml +++ b/charts/eventsk8sio-event-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"events.k8s.io","version":"v1","resource":"events"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Event Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: eventsk8sio-event-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/eventsk8sio-event-editor/README.md b/charts/eventsk8sio-event-editor/README.md index 98dbeadb5c..7436b7f847 100644 --- a/charts/eventsk8sio-event-editor/README.md +++ b/charts/eventsk8sio-event-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/eventsk8sio-event-editor --version=v0.38.0 -$ helm upgrade -i eventsk8sio-event-editor appscode/eventsk8sio-event-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/eventsk8sio-event-editor --version=v0.39.0 +$ helm upgrade -i eventsk8sio-event-editor appscode/eventsk8sio-event-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Event Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `eventsk8sio-event-editor`: ```bash -$ helm upgrade -i eventsk8sio-event-editor appscode/eventsk8sio-event-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i eventsk8sio-event-editor appscode/eventsk8sio-event-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Event Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `eventsk8sio-event- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i eventsk8sio-event-editor appscode/eventsk8sio-event-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=events.k8s.io/v1 +$ helm upgrade -i eventsk8sio-event-editor appscode/eventsk8sio-event-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=events.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i eventsk8sio-event-editor appscode/eventsk8sio-event-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i eventsk8sio-event-editor appscode/eventsk8sio-event-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/expansiongatekeepersh-expansiontemplate-editor/Chart.yaml b/charts/expansiongatekeepersh-expansiontemplate-editor/Chart.yaml index d7e7668cb0..51e1312714 100644 --- a/charts/expansiongatekeepersh-expansiontemplate-editor/Chart.yaml +++ b/charts/expansiongatekeepersh-expansiontemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"expansion.gatekeeper.sh","version":"v1alpha1","resource":"expansiontemplate"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ExpansionTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: expansiongatekeepersh-expansiontemplate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/expansiongatekeepersh-expansiontemplate-editor/README.md b/charts/expansiongatekeepersh-expansiontemplate-editor/README.md index e53fa6c9ee..c33acd61e2 100644 --- a/charts/expansiongatekeepersh-expansiontemplate-editor/README.md +++ b/charts/expansiongatekeepersh-expansiontemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/expansiongatekeepersh-expansiontemplate-editor --version=v0.38.0 -$ helm upgrade -i expansiongatekeepersh-expansiontemplate-editor appscode/expansiongatekeepersh-expansiontemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/expansiongatekeepersh-expansiontemplate-editor --version=v0.39.0 +$ helm upgrade -i expansiongatekeepersh-expansiontemplate-editor appscode/expansiongatekeepersh-expansiontemplate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ExpansionTemplate Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `expansiongatekeepersh-expansiontemplate-editor`: ```bash -$ helm upgrade -i expansiongatekeepersh-expansiontemplate-editor appscode/expansiongatekeepersh-expansiontemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i expansiongatekeepersh-expansiontemplate-editor appscode/expansiongatekeepersh-expansiontemplate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ExpansionTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `expansiongatekeepe Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i expansiongatekeepersh-expansiontemplate-editor appscode/expansiongatekeepersh-expansiontemplate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=expansion.gatekeeper.sh/v1alpha1 +$ helm upgrade -i expansiongatekeepersh-expansiontemplate-editor appscode/expansiongatekeepersh-expansiontemplate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=expansion.gatekeeper.sh/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i expansiongatekeepersh-expansiontemplate-editor appscode/expansiongatekeepersh-expansiontemplate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i expansiongatekeepersh-expansiontemplate-editor appscode/expansiongatekeepersh-expansiontemplate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/extensions-daemonset-editor/Chart.yaml b/charts/extensions-daemonset-editor/Chart.yaml index d65c688b68..3435407094 100644 --- a/charts/extensions-daemonset-editor/Chart.yaml +++ b/charts/extensions-daemonset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"extensions","version":"v1beta1","resource":"daemonsets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DaemonSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: extensions-daemonset-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/extensions-daemonset-editor/README.md b/charts/extensions-daemonset-editor/README.md index 9405044c54..8bad7255ed 100644 --- a/charts/extensions-daemonset-editor/README.md +++ b/charts/extensions-daemonset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/extensions-daemonset-editor --version=v0.38.0 -$ helm upgrade -i extensions-daemonset-editor appscode/extensions-daemonset-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/extensions-daemonset-editor --version=v0.39.0 +$ helm upgrade -i extensions-daemonset-editor appscode/extensions-daemonset-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DaemonSet Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `extensions-daemonset-editor`: ```bash -$ helm upgrade -i extensions-daemonset-editor appscode/extensions-daemonset-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i extensions-daemonset-editor appscode/extensions-daemonset-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DaemonSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `extensions-daemons Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i extensions-daemonset-editor appscode/extensions-daemonset-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=extensions/v1beta1 +$ helm upgrade -i extensions-daemonset-editor appscode/extensions-daemonset-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=extensions/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i extensions-daemonset-editor appscode/extensions-daemonset-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i extensions-daemonset-editor appscode/extensions-daemonset-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/extensions-deployment-editor/Chart.yaml b/charts/extensions-deployment-editor/Chart.yaml index b4bf10c597..0a3375ec32 100644 --- a/charts/extensions-deployment-editor/Chart.yaml +++ b/charts/extensions-deployment-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"extensions","version":"v1beta1","resource":"deployments"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Deployment Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: extensions-deployment-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/extensions-deployment-editor/README.md b/charts/extensions-deployment-editor/README.md index 7d929a5259..90c32b1088 100644 --- a/charts/extensions-deployment-editor/README.md +++ b/charts/extensions-deployment-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/extensions-deployment-editor --version=v0.38.0 -$ helm upgrade -i extensions-deployment-editor appscode/extensions-deployment-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/extensions-deployment-editor --version=v0.39.0 +$ helm upgrade -i extensions-deployment-editor appscode/extensions-deployment-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Deployment Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `extensions-deployment-editor`: ```bash -$ helm upgrade -i extensions-deployment-editor appscode/extensions-deployment-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i extensions-deployment-editor appscode/extensions-deployment-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Deployment Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `extensions-deploym Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i extensions-deployment-editor appscode/extensions-deployment-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=extensions/v1beta1 +$ helm upgrade -i extensions-deployment-editor appscode/extensions-deployment-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=extensions/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i extensions-deployment-editor appscode/extensions-deployment-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i extensions-deployment-editor appscode/extensions-deployment-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/extensions-ingress-editor/Chart.yaml b/charts/extensions-ingress-editor/Chart.yaml index 9f974d84eb..f04ed27989 100644 --- a/charts/extensions-ingress-editor/Chart.yaml +++ b/charts/extensions-ingress-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"extensions","version":"v1beta1","resource":"ingresses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Ingress Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: extensions-ingress-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/extensions-ingress-editor/README.md b/charts/extensions-ingress-editor/README.md index 4b65e2792a..b2b9601e0d 100644 --- a/charts/extensions-ingress-editor/README.md +++ b/charts/extensions-ingress-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/extensions-ingress-editor --version=v0.38.0 -$ helm upgrade -i extensions-ingress-editor appscode/extensions-ingress-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/extensions-ingress-editor --version=v0.39.0 +$ helm upgrade -i extensions-ingress-editor appscode/extensions-ingress-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Ingress Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `extensions-ingress-editor`: ```bash -$ helm upgrade -i extensions-ingress-editor appscode/extensions-ingress-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i extensions-ingress-editor appscode/extensions-ingress-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Ingress Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `extensions-ingress Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i extensions-ingress-editor appscode/extensions-ingress-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=extensions/v1beta1 +$ helm upgrade -i extensions-ingress-editor appscode/extensions-ingress-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=extensions/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i extensions-ingress-editor appscode/extensions-ingress-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i extensions-ingress-editor appscode/extensions-ingress-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/extensions-networkpolicy-editor/Chart.yaml b/charts/extensions-networkpolicy-editor/Chart.yaml index 468c87d207..61199dc6eb 100644 --- a/charts/extensions-networkpolicy-editor/Chart.yaml +++ b/charts/extensions-networkpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"extensions","version":"v1beta1","resource":"networkpolicies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: NetworkPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: extensions-networkpolicy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/extensions-networkpolicy-editor/README.md b/charts/extensions-networkpolicy-editor/README.md index 73096a2ada..d39999baf6 100644 --- a/charts/extensions-networkpolicy-editor/README.md +++ b/charts/extensions-networkpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/extensions-networkpolicy-editor --version=v0.38.0 -$ helm upgrade -i extensions-networkpolicy-editor appscode/extensions-networkpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/extensions-networkpolicy-editor --version=v0.39.0 +$ helm upgrade -i extensions-networkpolicy-editor appscode/extensions-networkpolicy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a NetworkPolicy Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `extensions-networkpolicy-editor`: ```bash -$ helm upgrade -i extensions-networkpolicy-editor appscode/extensions-networkpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i extensions-networkpolicy-editor appscode/extensions-networkpolicy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a NetworkPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `extensions-network Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i extensions-networkpolicy-editor appscode/extensions-networkpolicy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=extensions/v1beta1 +$ helm upgrade -i extensions-networkpolicy-editor appscode/extensions-networkpolicy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=extensions/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i extensions-networkpolicy-editor appscode/extensions-networkpolicy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i extensions-networkpolicy-editor appscode/extensions-networkpolicy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/extensions-podsecuritypolicy-editor/Chart.yaml b/charts/extensions-podsecuritypolicy-editor/Chart.yaml index 3ac4324ac5..1af9f2391e 100644 --- a/charts/extensions-podsecuritypolicy-editor/Chart.yaml +++ b/charts/extensions-podsecuritypolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"extensions","version":"v1beta1","resource":"podsecuritypolicies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PodSecurityPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: extensions-podsecuritypolicy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/extensions-podsecuritypolicy-editor/README.md b/charts/extensions-podsecuritypolicy-editor/README.md index f8838bdbdd..9a8d2fa6ff 100644 --- a/charts/extensions-podsecuritypolicy-editor/README.md +++ b/charts/extensions-podsecuritypolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/extensions-podsecuritypolicy-editor --version=v0.38.0 -$ helm upgrade -i extensions-podsecuritypolicy-editor appscode/extensions-podsecuritypolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/extensions-podsecuritypolicy-editor --version=v0.39.0 +$ helm upgrade -i extensions-podsecuritypolicy-editor appscode/extensions-podsecuritypolicy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PodSecurityPolicy Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `extensions-podsecuritypolicy-editor`: ```bash -$ helm upgrade -i extensions-podsecuritypolicy-editor appscode/extensions-podsecuritypolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i extensions-podsecuritypolicy-editor appscode/extensions-podsecuritypolicy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PodSecurityPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `extensions-podsecu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i extensions-podsecuritypolicy-editor appscode/extensions-podsecuritypolicy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=extensions/v1beta1 +$ helm upgrade -i extensions-podsecuritypolicy-editor appscode/extensions-podsecuritypolicy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=extensions/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i extensions-podsecuritypolicy-editor appscode/extensions-podsecuritypolicy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i extensions-podsecuritypolicy-editor appscode/extensions-podsecuritypolicy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/extensions-replicaset-editor/Chart.yaml b/charts/extensions-replicaset-editor/Chart.yaml index 52e2d47d07..d025e8fcc0 100644 --- a/charts/extensions-replicaset-editor/Chart.yaml +++ b/charts/extensions-replicaset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"extensions","version":"v1beta1","resource":"replicasets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ReplicaSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: extensions-replicaset-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/extensions-replicaset-editor/README.md b/charts/extensions-replicaset-editor/README.md index 9fff4f6f06..785f01c80b 100644 --- a/charts/extensions-replicaset-editor/README.md +++ b/charts/extensions-replicaset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/extensions-replicaset-editor --version=v0.38.0 -$ helm upgrade -i extensions-replicaset-editor appscode/extensions-replicaset-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/extensions-replicaset-editor --version=v0.39.0 +$ helm upgrade -i extensions-replicaset-editor appscode/extensions-replicaset-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ReplicaSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `extensions-replicaset-editor`: ```bash -$ helm upgrade -i extensions-replicaset-editor appscode/extensions-replicaset-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i extensions-replicaset-editor appscode/extensions-replicaset-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ReplicaSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `extensions-replica Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i extensions-replicaset-editor appscode/extensions-replicaset-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=extensions/v1beta1 +$ helm upgrade -i extensions-replicaset-editor appscode/extensions-replicaset-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=extensions/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i extensions-replicaset-editor appscode/extensions-replicaset-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i extensions-replicaset-editor appscode/extensions-replicaset-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/extensions-scale-editor/Chart.yaml b/charts/extensions-scale-editor/Chart.yaml index 065df57c48..87d75d9564 100644 --- a/charts/extensions-scale-editor/Chart.yaml +++ b/charts/extensions-scale-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"extensions","version":"v1beta1","resource":"scales"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Scale Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: extensions-scale-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/extensions-scale-editor/README.md b/charts/extensions-scale-editor/README.md index 8a6a0f74cc..489a0270b8 100644 --- a/charts/extensions-scale-editor/README.md +++ b/charts/extensions-scale-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/extensions-scale-editor --version=v0.38.0 -$ helm upgrade -i extensions-scale-editor appscode/extensions-scale-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/extensions-scale-editor --version=v0.39.0 +$ helm upgrade -i extensions-scale-editor appscode/extensions-scale-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Scale Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `extensions-scale-editor`: ```bash -$ helm upgrade -i extensions-scale-editor appscode/extensions-scale-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i extensions-scale-editor appscode/extensions-scale-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Scale Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `extensions-scale-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i extensions-scale-editor appscode/extensions-scale-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=extensions/v1beta1 +$ helm upgrade -i extensions-scale-editor appscode/extensions-scale-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=extensions/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i extensions-scale-editor appscode/extensions-scale-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i extensions-scale-editor appscode/extensions-scale-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/externaldnsappscodecom-externaldns-editor/Chart.yaml b/charts/externaldnsappscodecom-externaldns-editor/Chart.yaml index 3349c39abe..8ec57e8015 100644 --- a/charts/externaldnsappscodecom-externaldns-editor/Chart.yaml +++ b/charts/externaldnsappscodecom-externaldns-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"external-dns.appscode.com","version":"v1alpha1","resource":"externaldns"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ExternalDNS Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: externaldnsappscodecom-externaldns-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/externaldnsappscodecom-externaldns-editor/README.md b/charts/externaldnsappscodecom-externaldns-editor/README.md index c025b5c262..debe5bec4d 100644 --- a/charts/externaldnsappscodecom-externaldns-editor/README.md +++ b/charts/externaldnsappscodecom-externaldns-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/externaldnsappscodecom-externaldns-editor --version=v0.38.0 -$ helm upgrade -i externaldnsappscodecom-externaldns-editor appscode/externaldnsappscodecom-externaldns-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/externaldnsappscodecom-externaldns-editor --version=v0.39.0 +$ helm upgrade -i externaldnsappscodecom-externaldns-editor appscode/externaldnsappscodecom-externaldns-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ExternalDNS Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `externaldnsappscodecom-externaldns-editor`: ```bash -$ helm upgrade -i externaldnsappscodecom-externaldns-editor appscode/externaldnsappscodecom-externaldns-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i externaldnsappscodecom-externaldns-editor appscode/externaldnsappscodecom-externaldns-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ExternalDNS Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `externaldnsappscod Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i externaldnsappscodecom-externaldns-editor appscode/externaldnsappscodecom-externaldns-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=external-dns.appscode.com/v1alpha1 +$ helm upgrade -i externaldnsappscodecom-externaldns-editor appscode/externaldnsappscodecom-externaldns-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=external-dns.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i externaldnsappscodecom-externaldns-editor appscode/externaldnsappscodecom-externaldns-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i externaldnsappscodecom-externaldns-editor appscode/externaldnsappscodecom-externaldns-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/falcoappscodecom-falcoevent-editor/Chart.yaml b/charts/falcoappscodecom-falcoevent-editor/Chart.yaml index 9ac61e3075..3185360397 100644 --- a/charts/falcoappscodecom-falcoevent-editor/Chart.yaml +++ b/charts/falcoappscodecom-falcoevent-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"falco.appscode.com","version":"v1alpha1","resource":"falcoevents"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FalcoEvent Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: falcoappscodecom-falcoevent-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/falcoappscodecom-falcoevent-editor/README.md b/charts/falcoappscodecom-falcoevent-editor/README.md index 26b4b26a08..c2aefc545d 100644 --- a/charts/falcoappscodecom-falcoevent-editor/README.md +++ b/charts/falcoappscodecom-falcoevent-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/falcoappscodecom-falcoevent-editor --version=v0.38.0 -$ helm upgrade -i falcoappscodecom-falcoevent-editor appscode/falcoappscodecom-falcoevent-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/falcoappscodecom-falcoevent-editor --version=v0.39.0 +$ helm upgrade -i falcoappscodecom-falcoevent-editor appscode/falcoappscodecom-falcoevent-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FalcoEvent Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `falcoappscodecom-falcoevent-editor`: ```bash -$ helm upgrade -i falcoappscodecom-falcoevent-editor appscode/falcoappscodecom-falcoevent-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i falcoappscodecom-falcoevent-editor appscode/falcoappscodecom-falcoevent-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FalcoEvent Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `falcoappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i falcoappscodecom-falcoevent-editor appscode/falcoappscodecom-falcoevent-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=falco.appscode.com/v1alpha1 +$ helm upgrade -i falcoappscodecom-falcoevent-editor appscode/falcoappscodecom-falcoevent-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=falco.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i falcoappscodecom-falcoevent-editor appscode/falcoappscodecom-falcoevent-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i falcoappscodecom-falcoevent-editor appscode/falcoappscodecom-falcoevent-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/flowcontrolapiserverk8sio-flowschema-editor/Chart.yaml b/charts/flowcontrolapiserverk8sio-flowschema-editor/Chart.yaml index c8ea8e010a..3848af284f 100644 --- a/charts/flowcontrolapiserverk8sio-flowschema-editor/Chart.yaml +++ b/charts/flowcontrolapiserverk8sio-flowschema-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"flowcontrol.apiserver.k8s.io","version":"v1beta1","resource":"flowschemas"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FlowSchema Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: flowcontrolapiserverk8sio-flowschema-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/flowcontrolapiserverk8sio-flowschema-editor/README.md b/charts/flowcontrolapiserverk8sio-flowschema-editor/README.md index 2f02680c90..9cffb05ddc 100644 --- a/charts/flowcontrolapiserverk8sio-flowschema-editor/README.md +++ b/charts/flowcontrolapiserverk8sio-flowschema-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/flowcontrolapiserverk8sio-flowschema-editor --version=v0.38.0 -$ helm upgrade -i flowcontrolapiserverk8sio-flowschema-editor appscode/flowcontrolapiserverk8sio-flowschema-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/flowcontrolapiserverk8sio-flowschema-editor --version=v0.39.0 +$ helm upgrade -i flowcontrolapiserverk8sio-flowschema-editor appscode/flowcontrolapiserverk8sio-flowschema-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FlowSchema Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `flowcontrolapiserverk8sio-flowschema-editor`: ```bash -$ helm upgrade -i flowcontrolapiserverk8sio-flowschema-editor appscode/flowcontrolapiserverk8sio-flowschema-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i flowcontrolapiserverk8sio-flowschema-editor appscode/flowcontrolapiserverk8sio-flowschema-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FlowSchema Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `flowcontrolapiserv Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i flowcontrolapiserverk8sio-flowschema-editor appscode/flowcontrolapiserverk8sio-flowschema-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=flowcontrol.apiserver.k8s.io/v1beta1 +$ helm upgrade -i flowcontrolapiserverk8sio-flowschema-editor appscode/flowcontrolapiserverk8sio-flowschema-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=flowcontrol.apiserver.k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i flowcontrolapiserverk8sio-flowschema-editor appscode/flowcontrolapiserverk8sio-flowschema-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i flowcontrolapiserverk8sio-flowschema-editor appscode/flowcontrolapiserverk8sio-flowschema-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor/Chart.yaml b/charts/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor/Chart.yaml index 1ae1a1de49..6e5c380b78 100644 --- a/charts/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor/Chart.yaml +++ b/charts/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"flowcontrol.apiserver.k8s.io","version":"v1beta1","resource":"prioritylevelconfigurations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PriorityLevelConfiguration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: flowcontrolapiserverk8sio-prioritylevelconfiguration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor/README.md b/charts/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor/README.md index c67a22396f..1fa62e3ab8 100644 --- a/charts/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor/README.md +++ b/charts/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor --version=v0.38.0 -$ helm upgrade -i flowcontrolapiserverk8sio-prioritylevelconfiguration-editor appscode/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor --version=v0.39.0 +$ helm upgrade -i flowcontrolapiserverk8sio-prioritylevelconfiguration-editor appscode/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PriorityLevelConfiguration Editor on a [Kubernetes](http:// To install/upgrade the chart with the release name `flowcontrolapiserverk8sio-prioritylevelconfiguration-editor`: ```bash -$ helm upgrade -i flowcontrolapiserverk8sio-prioritylevelconfiguration-editor appscode/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i flowcontrolapiserverk8sio-prioritylevelconfiguration-editor appscode/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PriorityLevelConfiguration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `flowcontrolapiserv Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i flowcontrolapiserverk8sio-prioritylevelconfiguration-editor appscode/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=flowcontrol.apiserver.k8s.io/v1beta1 +$ helm upgrade -i flowcontrolapiserverk8sio-prioritylevelconfiguration-editor appscode/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=flowcontrol.apiserver.k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i flowcontrolapiserverk8sio-prioritylevelconfiguration-editor appscode/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i flowcontrolapiserverk8sio-prioritylevelconfiguration-editor appscode/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/fluxcdopenclustermanagementio-fluxcdconfig-editor/Chart.yaml b/charts/fluxcdopenclustermanagementio-fluxcdconfig-editor/Chart.yaml index b3846d8a00..3e58ddb219 100644 --- a/charts/fluxcdopenclustermanagementio-fluxcdconfig-editor/Chart.yaml +++ b/charts/fluxcdopenclustermanagementio-fluxcdconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"fluxcd.open-cluster-management.io","version":"v1alpha1","resource":"fluxcdconfigs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FluxCDConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: fluxcdopenclustermanagementio-fluxcdconfig-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/fluxcdopenclustermanagementio-fluxcdconfig-editor/README.md b/charts/fluxcdopenclustermanagementio-fluxcdconfig-editor/README.md index e46a4a7c7a..7d7468432e 100644 --- a/charts/fluxcdopenclustermanagementio-fluxcdconfig-editor/README.md +++ b/charts/fluxcdopenclustermanagementio-fluxcdconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/fluxcdopenclustermanagementio-fluxcdconfig-editor --version=v0.38.0 -$ helm upgrade -i fluxcdopenclustermanagementio-fluxcdconfig-editor appscode/fluxcdopenclustermanagementio-fluxcdconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/fluxcdopenclustermanagementio-fluxcdconfig-editor --version=v0.39.0 +$ helm upgrade -i fluxcdopenclustermanagementio-fluxcdconfig-editor appscode/fluxcdopenclustermanagementio-fluxcdconfig-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FluxCDConfig Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `fluxcdopenclustermanagementio-fluxcdconfig-editor`: ```bash -$ helm upgrade -i fluxcdopenclustermanagementio-fluxcdconfig-editor appscode/fluxcdopenclustermanagementio-fluxcdconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i fluxcdopenclustermanagementio-fluxcdconfig-editor appscode/fluxcdopenclustermanagementio-fluxcdconfig-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FluxCDConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `fluxcdopenclusterm Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i fluxcdopenclustermanagementio-fluxcdconfig-editor appscode/fluxcdopenclustermanagementio-fluxcdconfig-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=fluxcd.open-cluster-management.io/v1alpha1 +$ helm upgrade -i fluxcdopenclustermanagementio-fluxcdconfig-editor appscode/fluxcdopenclustermanagementio-fluxcdconfig-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=fluxcd.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i fluxcdopenclustermanagementio-fluxcdconfig-editor appscode/fluxcdopenclustermanagementio-fluxcdconfig-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i fluxcdopenclustermanagementio-fluxcdconfig-editor appscode/fluxcdopenclustermanagementio-fluxcdconfig-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewaycatalogappscodecom-gatewayconfig-editor/Chart.yaml b/charts/gatewaycatalogappscodecom-gatewayconfig-editor/Chart.yaml index 4ccd175ecc..4569cbc852 100644 --- a/charts/gatewaycatalogappscodecom-gatewayconfig-editor/Chart.yaml +++ b/charts/gatewaycatalogappscodecom-gatewayconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.catalog.appscode.com","version":"v1alpha1","resource":"gatewayconfigs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GatewayConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaycatalogappscodecom-gatewayconfig-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewaycatalogappscodecom-gatewayconfig-editor/README.md b/charts/gatewaycatalogappscodecom-gatewayconfig-editor/README.md index dbc5fb9390..069b7c9cf6 100644 --- a/charts/gatewaycatalogappscodecom-gatewayconfig-editor/README.md +++ b/charts/gatewaycatalogappscodecom-gatewayconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaycatalogappscodecom-gatewayconfig-editor --version=v0.38.0 -$ helm upgrade -i gatewaycatalogappscodecom-gatewayconfig-editor appscode/gatewaycatalogappscodecom-gatewayconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewaycatalogappscodecom-gatewayconfig-editor --version=v0.39.0 +$ helm upgrade -i gatewaycatalogappscodecom-gatewayconfig-editor appscode/gatewaycatalogappscodecom-gatewayconfig-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GatewayConfig Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `gatewaycatalogappscodecom-gatewayconfig-editor`: ```bash -$ helm upgrade -i gatewaycatalogappscodecom-gatewayconfig-editor appscode/gatewaycatalogappscodecom-gatewayconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewaycatalogappscodecom-gatewayconfig-editor appscode/gatewaycatalogappscodecom-gatewayconfig-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GatewayConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaycatalogapps Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaycatalogappscodecom-gatewayconfig-editor appscode/gatewaycatalogappscodecom-gatewayconfig-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.catalog.appscode.com/v1alpha1 +$ helm upgrade -i gatewaycatalogappscodecom-gatewayconfig-editor appscode/gatewaycatalogappscodecom-gatewayconfig-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaycatalogappscodecom-gatewayconfig-editor appscode/gatewaycatalogappscodecom-gatewayconfig-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewaycatalogappscodecom-gatewayconfig-editor appscode/gatewaycatalogappscodecom-gatewayconfig-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewaycatalogappscodecom-gatewaypreset-editor/Chart.yaml b/charts/gatewaycatalogappscodecom-gatewaypreset-editor/Chart.yaml index df1cce8c9a..6039dbcabf 100644 --- a/charts/gatewaycatalogappscodecom-gatewaypreset-editor/Chart.yaml +++ b/charts/gatewaycatalogappscodecom-gatewaypreset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.catalog.appscode.com","version":"v1alpha1","resource":"gatewaypresets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GatewayPreset Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaycatalogappscodecom-gatewaypreset-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewaycatalogappscodecom-gatewaypreset-editor/README.md b/charts/gatewaycatalogappscodecom-gatewaypreset-editor/README.md index b92d5f587d..e70a716bc2 100644 --- a/charts/gatewaycatalogappscodecom-gatewaypreset-editor/README.md +++ b/charts/gatewaycatalogappscodecom-gatewaypreset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaycatalogappscodecom-gatewaypreset-editor --version=v0.38.0 -$ helm upgrade -i gatewaycatalogappscodecom-gatewaypreset-editor appscode/gatewaycatalogappscodecom-gatewaypreset-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewaycatalogappscodecom-gatewaypreset-editor --version=v0.39.0 +$ helm upgrade -i gatewaycatalogappscodecom-gatewaypreset-editor appscode/gatewaycatalogappscodecom-gatewaypreset-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GatewayPreset Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `gatewaycatalogappscodecom-gatewaypreset-editor`: ```bash -$ helm upgrade -i gatewaycatalogappscodecom-gatewaypreset-editor appscode/gatewaycatalogappscodecom-gatewaypreset-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewaycatalogappscodecom-gatewaypreset-editor appscode/gatewaycatalogappscodecom-gatewaypreset-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GatewayPreset Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaycatalogapps Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaycatalogappscodecom-gatewaypreset-editor appscode/gatewaycatalogappscodecom-gatewaypreset-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.catalog.appscode.com/v1alpha1 +$ helm upgrade -i gatewaycatalogappscodecom-gatewaypreset-editor appscode/gatewaycatalogappscodecom-gatewaypreset-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaycatalogappscodecom-gatewaypreset-editor appscode/gatewaycatalogappscodecom-gatewaypreset-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewaycatalogappscodecom-gatewaypreset-editor appscode/gatewaycatalogappscodecom-gatewaypreset-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewayenvoyproxyio-authenticationfilter-editor/Chart.yaml b/charts/gatewayenvoyproxyio-authenticationfilter-editor/Chart.yaml index ab62e0b0d1..78491d2b74 100644 --- a/charts/gatewayenvoyproxyio-authenticationfilter-editor/Chart.yaml +++ b/charts/gatewayenvoyproxyio-authenticationfilter-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.envoyproxy.io","version":"v1alpha1","resource":"authenticationfilters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AuthenticationFilter Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayenvoyproxyio-authenticationfilter-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewayenvoyproxyio-authenticationfilter-editor/README.md b/charts/gatewayenvoyproxyio-authenticationfilter-editor/README.md index e10beb4fee..ef0d06d7cb 100644 --- a/charts/gatewayenvoyproxyio-authenticationfilter-editor/README.md +++ b/charts/gatewayenvoyproxyio-authenticationfilter-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayenvoyproxyio-authenticationfilter-editor --version=v0.38.0 -$ helm upgrade -i gatewayenvoyproxyio-authenticationfilter-editor appscode/gatewayenvoyproxyio-authenticationfilter-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewayenvoyproxyio-authenticationfilter-editor --version=v0.39.0 +$ helm upgrade -i gatewayenvoyproxyio-authenticationfilter-editor appscode/gatewayenvoyproxyio-authenticationfilter-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AuthenticationFilter Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `gatewayenvoyproxyio-authenticationfilter-editor`: ```bash -$ helm upgrade -i gatewayenvoyproxyio-authenticationfilter-editor appscode/gatewayenvoyproxyio-authenticationfilter-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewayenvoyproxyio-authenticationfilter-editor appscode/gatewayenvoyproxyio-authenticationfilter-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AuthenticationFilter Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayenvoyproxyi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-authenticationfilter-editor appscode/gatewayenvoyproxyio-authenticationfilter-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i gatewayenvoyproxyio-authenticationfilter-editor appscode/gatewayenvoyproxyio-authenticationfilter-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-authenticationfilter-editor appscode/gatewayenvoyproxyio-authenticationfilter-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewayenvoyproxyio-authenticationfilter-editor appscode/gatewayenvoyproxyio-authenticationfilter-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewayenvoyproxyio-backend-editor/Chart.yaml b/charts/gatewayenvoyproxyio-backend-editor/Chart.yaml index 2bd3fd0984..680819c2d2 100644 --- a/charts/gatewayenvoyproxyio-backend-editor/Chart.yaml +++ b/charts/gatewayenvoyproxyio-backend-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.envoyproxy.io","version":"v1alpha1","resource":"backends"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Backend Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayenvoyproxyio-backend-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewayenvoyproxyio-backend-editor/README.md b/charts/gatewayenvoyproxyio-backend-editor/README.md index 9c9c9c0638..bd855782b3 100644 --- a/charts/gatewayenvoyproxyio-backend-editor/README.md +++ b/charts/gatewayenvoyproxyio-backend-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayenvoyproxyio-backend-editor --version=v0.38.0 -$ helm upgrade -i gatewayenvoyproxyio-backend-editor appscode/gatewayenvoyproxyio-backend-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewayenvoyproxyio-backend-editor --version=v0.39.0 +$ helm upgrade -i gatewayenvoyproxyio-backend-editor appscode/gatewayenvoyproxyio-backend-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Backend Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `gatewayenvoyproxyio-backend-editor`: ```bash -$ helm upgrade -i gatewayenvoyproxyio-backend-editor appscode/gatewayenvoyproxyio-backend-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewayenvoyproxyio-backend-editor appscode/gatewayenvoyproxyio-backend-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Backend Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayenvoyproxyi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-backend-editor appscode/gatewayenvoyproxyio-backend-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i gatewayenvoyproxyio-backend-editor appscode/gatewayenvoyproxyio-backend-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-backend-editor appscode/gatewayenvoyproxyio-backend-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewayenvoyproxyio-backend-editor appscode/gatewayenvoyproxyio-backend-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewayenvoyproxyio-backendtrafficpolicy-editor/Chart.yaml b/charts/gatewayenvoyproxyio-backendtrafficpolicy-editor/Chart.yaml index 47db20d3e2..cb09cfe340 100644 --- a/charts/gatewayenvoyproxyio-backendtrafficpolicy-editor/Chart.yaml +++ b/charts/gatewayenvoyproxyio-backendtrafficpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.envoyproxy.io","version":"v1alpha1","resource":"backendtrafficpolicies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: BackendTrafficPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayenvoyproxyio-backendtrafficpolicy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewayenvoyproxyio-backendtrafficpolicy-editor/README.md b/charts/gatewayenvoyproxyio-backendtrafficpolicy-editor/README.md index 6122706ff3..aed3c64785 100644 --- a/charts/gatewayenvoyproxyio-backendtrafficpolicy-editor/README.md +++ b/charts/gatewayenvoyproxyio-backendtrafficpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayenvoyproxyio-backendtrafficpolicy-editor --version=v0.38.0 -$ helm upgrade -i gatewayenvoyproxyio-backendtrafficpolicy-editor appscode/gatewayenvoyproxyio-backendtrafficpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewayenvoyproxyio-backendtrafficpolicy-editor --version=v0.39.0 +$ helm upgrade -i gatewayenvoyproxyio-backendtrafficpolicy-editor appscode/gatewayenvoyproxyio-backendtrafficpolicy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackendTrafficPolicy Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `gatewayenvoyproxyio-backendtrafficpolicy-editor`: ```bash -$ helm upgrade -i gatewayenvoyproxyio-backendtrafficpolicy-editor appscode/gatewayenvoyproxyio-backendtrafficpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewayenvoyproxyio-backendtrafficpolicy-editor appscode/gatewayenvoyproxyio-backendtrafficpolicy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a BackendTrafficPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayenvoyproxyi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-backendtrafficpolicy-editor appscode/gatewayenvoyproxyio-backendtrafficpolicy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i gatewayenvoyproxyio-backendtrafficpolicy-editor appscode/gatewayenvoyproxyio-backendtrafficpolicy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-backendtrafficpolicy-editor appscode/gatewayenvoyproxyio-backendtrafficpolicy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewayenvoyproxyio-backendtrafficpolicy-editor appscode/gatewayenvoyproxyio-backendtrafficpolicy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewayenvoyproxyio-clienttrafficpolicy-editor/Chart.yaml b/charts/gatewayenvoyproxyio-clienttrafficpolicy-editor/Chart.yaml index ebb70b15b3..d0f81f4c10 100644 --- a/charts/gatewayenvoyproxyio-clienttrafficpolicy-editor/Chart.yaml +++ b/charts/gatewayenvoyproxyio-clienttrafficpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.envoyproxy.io","version":"v1alpha1","resource":"clienttrafficpolicies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClientTrafficPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayenvoyproxyio-clienttrafficpolicy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewayenvoyproxyio-clienttrafficpolicy-editor/README.md b/charts/gatewayenvoyproxyio-clienttrafficpolicy-editor/README.md index 998f9adcd5..c0818bf594 100644 --- a/charts/gatewayenvoyproxyio-clienttrafficpolicy-editor/README.md +++ b/charts/gatewayenvoyproxyio-clienttrafficpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayenvoyproxyio-clienttrafficpolicy-editor --version=v0.38.0 -$ helm upgrade -i gatewayenvoyproxyio-clienttrafficpolicy-editor appscode/gatewayenvoyproxyio-clienttrafficpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewayenvoyproxyio-clienttrafficpolicy-editor --version=v0.39.0 +$ helm upgrade -i gatewayenvoyproxyio-clienttrafficpolicy-editor appscode/gatewayenvoyproxyio-clienttrafficpolicy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClientTrafficPolicy Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `gatewayenvoyproxyio-clienttrafficpolicy-editor`: ```bash -$ helm upgrade -i gatewayenvoyproxyio-clienttrafficpolicy-editor appscode/gatewayenvoyproxyio-clienttrafficpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewayenvoyproxyio-clienttrafficpolicy-editor appscode/gatewayenvoyproxyio-clienttrafficpolicy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClientTrafficPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayenvoyproxyi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-clienttrafficpolicy-editor appscode/gatewayenvoyproxyio-clienttrafficpolicy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i gatewayenvoyproxyio-clienttrafficpolicy-editor appscode/gatewayenvoyproxyio-clienttrafficpolicy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-clienttrafficpolicy-editor appscode/gatewayenvoyproxyio-clienttrafficpolicy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewayenvoyproxyio-clienttrafficpolicy-editor appscode/gatewayenvoyproxyio-clienttrafficpolicy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewayenvoyproxyio-envoyextensionpolicy-editor/Chart.yaml b/charts/gatewayenvoyproxyio-envoyextensionpolicy-editor/Chart.yaml index 1333438f64..c4d1ed04de 100644 --- a/charts/gatewayenvoyproxyio-envoyextensionpolicy-editor/Chart.yaml +++ b/charts/gatewayenvoyproxyio-envoyextensionpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.envoyproxy.io","version":"v1alpha1","resource":"envoyextensionpolicies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: EnvoyExtensionPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayenvoyproxyio-envoyextensionpolicy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewayenvoyproxyio-envoyextensionpolicy-editor/README.md b/charts/gatewayenvoyproxyio-envoyextensionpolicy-editor/README.md index 53211199ed..9782ec7b0d 100644 --- a/charts/gatewayenvoyproxyio-envoyextensionpolicy-editor/README.md +++ b/charts/gatewayenvoyproxyio-envoyextensionpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayenvoyproxyio-envoyextensionpolicy-editor --version=v0.38.0 -$ helm upgrade -i gatewayenvoyproxyio-envoyextensionpolicy-editor appscode/gatewayenvoyproxyio-envoyextensionpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewayenvoyproxyio-envoyextensionpolicy-editor --version=v0.39.0 +$ helm upgrade -i gatewayenvoyproxyio-envoyextensionpolicy-editor appscode/gatewayenvoyproxyio-envoyextensionpolicy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EnvoyExtensionPolicy Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `gatewayenvoyproxyio-envoyextensionpolicy-editor`: ```bash -$ helm upgrade -i gatewayenvoyproxyio-envoyextensionpolicy-editor appscode/gatewayenvoyproxyio-envoyextensionpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewayenvoyproxyio-envoyextensionpolicy-editor appscode/gatewayenvoyproxyio-envoyextensionpolicy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a EnvoyExtensionPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayenvoyproxyi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-envoyextensionpolicy-editor appscode/gatewayenvoyproxyio-envoyextensionpolicy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i gatewayenvoyproxyio-envoyextensionpolicy-editor appscode/gatewayenvoyproxyio-envoyextensionpolicy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-envoyextensionpolicy-editor appscode/gatewayenvoyproxyio-envoyextensionpolicy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewayenvoyproxyio-envoyextensionpolicy-editor appscode/gatewayenvoyproxyio-envoyextensionpolicy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewayenvoyproxyio-envoypatchpolicy-editor/Chart.yaml b/charts/gatewayenvoyproxyio-envoypatchpolicy-editor/Chart.yaml index 897521bcd9..61fd633e13 100644 --- a/charts/gatewayenvoyproxyio-envoypatchpolicy-editor/Chart.yaml +++ b/charts/gatewayenvoyproxyio-envoypatchpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.envoyproxy.io","version":"v1alpha1","resource":"envoypatchpolicies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: EnvoyPatchPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayenvoyproxyio-envoypatchpolicy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewayenvoyproxyio-envoypatchpolicy-editor/README.md b/charts/gatewayenvoyproxyio-envoypatchpolicy-editor/README.md index 23dc7f3b2f..ef247bf83f 100644 --- a/charts/gatewayenvoyproxyio-envoypatchpolicy-editor/README.md +++ b/charts/gatewayenvoyproxyio-envoypatchpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayenvoyproxyio-envoypatchpolicy-editor --version=v0.38.0 -$ helm upgrade -i gatewayenvoyproxyio-envoypatchpolicy-editor appscode/gatewayenvoyproxyio-envoypatchpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewayenvoyproxyio-envoypatchpolicy-editor --version=v0.39.0 +$ helm upgrade -i gatewayenvoyproxyio-envoypatchpolicy-editor appscode/gatewayenvoyproxyio-envoypatchpolicy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EnvoyPatchPolicy Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `gatewayenvoyproxyio-envoypatchpolicy-editor`: ```bash -$ helm upgrade -i gatewayenvoyproxyio-envoypatchpolicy-editor appscode/gatewayenvoyproxyio-envoypatchpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewayenvoyproxyio-envoypatchpolicy-editor appscode/gatewayenvoyproxyio-envoypatchpolicy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a EnvoyPatchPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayenvoyproxyi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-envoypatchpolicy-editor appscode/gatewayenvoyproxyio-envoypatchpolicy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i gatewayenvoyproxyio-envoypatchpolicy-editor appscode/gatewayenvoyproxyio-envoypatchpolicy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-envoypatchpolicy-editor appscode/gatewayenvoyproxyio-envoypatchpolicy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewayenvoyproxyio-envoypatchpolicy-editor appscode/gatewayenvoyproxyio-envoypatchpolicy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewayenvoyproxyio-envoyproxy-editor/Chart.yaml b/charts/gatewayenvoyproxyio-envoyproxy-editor/Chart.yaml index b9183daf20..a2a7a8d474 100644 --- a/charts/gatewayenvoyproxyio-envoyproxy-editor/Chart.yaml +++ b/charts/gatewayenvoyproxyio-envoyproxy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.envoyproxy.io","version":"v1alpha1","resource":"envoyproxies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: EnvoyProxy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayenvoyproxyio-envoyproxy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewayenvoyproxyio-envoyproxy-editor/README.md b/charts/gatewayenvoyproxyio-envoyproxy-editor/README.md index 162849c749..0f4077456c 100644 --- a/charts/gatewayenvoyproxyio-envoyproxy-editor/README.md +++ b/charts/gatewayenvoyproxyio-envoyproxy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayenvoyproxyio-envoyproxy-editor --version=v0.38.0 -$ helm upgrade -i gatewayenvoyproxyio-envoyproxy-editor appscode/gatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewayenvoyproxyio-envoyproxy-editor --version=v0.39.0 +$ helm upgrade -i gatewayenvoyproxyio-envoyproxy-editor appscode/gatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EnvoyProxy Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `gatewayenvoyproxyio-envoyproxy-editor`: ```bash -$ helm upgrade -i gatewayenvoyproxyio-envoyproxy-editor appscode/gatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewayenvoyproxyio-envoyproxy-editor appscode/gatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a EnvoyProxy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayenvoyproxyi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-envoyproxy-editor appscode/gatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i gatewayenvoyproxyio-envoyproxy-editor appscode/gatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-envoyproxy-editor appscode/gatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewayenvoyproxyio-envoyproxy-editor appscode/gatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewayenvoyproxyio-httproutefilter-editor/Chart.yaml b/charts/gatewayenvoyproxyio-httproutefilter-editor/Chart.yaml index 29da92d264..2ada4443d4 100644 --- a/charts/gatewayenvoyproxyio-httproutefilter-editor/Chart.yaml +++ b/charts/gatewayenvoyproxyio-httproutefilter-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.envoyproxy.io","version":"v1alpha1","resource":"httproutefilters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: HTTPRouteFilter Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayenvoyproxyio-httproutefilter-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewayenvoyproxyio-httproutefilter-editor/README.md b/charts/gatewayenvoyproxyio-httproutefilter-editor/README.md index 434cfa0419..05e0319e5d 100644 --- a/charts/gatewayenvoyproxyio-httproutefilter-editor/README.md +++ b/charts/gatewayenvoyproxyio-httproutefilter-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayenvoyproxyio-httproutefilter-editor --version=v0.38.0 -$ helm upgrade -i gatewayenvoyproxyio-httproutefilter-editor appscode/gatewayenvoyproxyio-httproutefilter-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewayenvoyproxyio-httproutefilter-editor --version=v0.39.0 +$ helm upgrade -i gatewayenvoyproxyio-httproutefilter-editor appscode/gatewayenvoyproxyio-httproutefilter-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HTTPRouteFilter Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `gatewayenvoyproxyio-httproutefilter-editor`: ```bash -$ helm upgrade -i gatewayenvoyproxyio-httproutefilter-editor appscode/gatewayenvoyproxyio-httproutefilter-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewayenvoyproxyio-httproutefilter-editor appscode/gatewayenvoyproxyio-httproutefilter-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a HTTPRouteFilter Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayenvoyproxyi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-httproutefilter-editor appscode/gatewayenvoyproxyio-httproutefilter-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i gatewayenvoyproxyio-httproutefilter-editor appscode/gatewayenvoyproxyio-httproutefilter-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-httproutefilter-editor appscode/gatewayenvoyproxyio-httproutefilter-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewayenvoyproxyio-httproutefilter-editor appscode/gatewayenvoyproxyio-httproutefilter-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewayenvoyproxyio-ratelimitfilter-editor/Chart.yaml b/charts/gatewayenvoyproxyio-ratelimitfilter-editor/Chart.yaml index 327087e87b..9bc0dacd4b 100644 --- a/charts/gatewayenvoyproxyio-ratelimitfilter-editor/Chart.yaml +++ b/charts/gatewayenvoyproxyio-ratelimitfilter-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.envoyproxy.io","version":"v1alpha1","resource":"ratelimitfilters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RateLimitFilter Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayenvoyproxyio-ratelimitfilter-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewayenvoyproxyio-ratelimitfilter-editor/README.md b/charts/gatewayenvoyproxyio-ratelimitfilter-editor/README.md index dd278d40c5..b455f2f104 100644 --- a/charts/gatewayenvoyproxyio-ratelimitfilter-editor/README.md +++ b/charts/gatewayenvoyproxyio-ratelimitfilter-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayenvoyproxyio-ratelimitfilter-editor --version=v0.38.0 -$ helm upgrade -i gatewayenvoyproxyio-ratelimitfilter-editor appscode/gatewayenvoyproxyio-ratelimitfilter-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewayenvoyproxyio-ratelimitfilter-editor --version=v0.39.0 +$ helm upgrade -i gatewayenvoyproxyio-ratelimitfilter-editor appscode/gatewayenvoyproxyio-ratelimitfilter-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RateLimitFilter Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `gatewayenvoyproxyio-ratelimitfilter-editor`: ```bash -$ helm upgrade -i gatewayenvoyproxyio-ratelimitfilter-editor appscode/gatewayenvoyproxyio-ratelimitfilter-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewayenvoyproxyio-ratelimitfilter-editor appscode/gatewayenvoyproxyio-ratelimitfilter-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RateLimitFilter Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayenvoyproxyi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-ratelimitfilter-editor appscode/gatewayenvoyproxyio-ratelimitfilter-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i gatewayenvoyproxyio-ratelimitfilter-editor appscode/gatewayenvoyproxyio-ratelimitfilter-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-ratelimitfilter-editor appscode/gatewayenvoyproxyio-ratelimitfilter-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewayenvoyproxyio-ratelimitfilter-editor appscode/gatewayenvoyproxyio-ratelimitfilter-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewayenvoyproxyio-securitypolicy-editor/Chart.yaml b/charts/gatewayenvoyproxyio-securitypolicy-editor/Chart.yaml index eba43f4899..0b7a108819 100644 --- a/charts/gatewayenvoyproxyio-securitypolicy-editor/Chart.yaml +++ b/charts/gatewayenvoyproxyio-securitypolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.envoyproxy.io","version":"v1alpha1","resource":"securitypolicies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SecurityPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayenvoyproxyio-securitypolicy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewayenvoyproxyio-securitypolicy-editor/README.md b/charts/gatewayenvoyproxyio-securitypolicy-editor/README.md index 88f3d95367..0a0422cb87 100644 --- a/charts/gatewayenvoyproxyio-securitypolicy-editor/README.md +++ b/charts/gatewayenvoyproxyio-securitypolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayenvoyproxyio-securitypolicy-editor --version=v0.38.0 -$ helm upgrade -i gatewayenvoyproxyio-securitypolicy-editor appscode/gatewayenvoyproxyio-securitypolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewayenvoyproxyio-securitypolicy-editor --version=v0.39.0 +$ helm upgrade -i gatewayenvoyproxyio-securitypolicy-editor appscode/gatewayenvoyproxyio-securitypolicy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecurityPolicy Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `gatewayenvoyproxyio-securitypolicy-editor`: ```bash -$ helm upgrade -i gatewayenvoyproxyio-securitypolicy-editor appscode/gatewayenvoyproxyio-securitypolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewayenvoyproxyio-securitypolicy-editor appscode/gatewayenvoyproxyio-securitypolicy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SecurityPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayenvoyproxyi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-securitypolicy-editor appscode/gatewayenvoyproxyio-securitypolicy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i gatewayenvoyproxyio-securitypolicy-editor appscode/gatewayenvoyproxyio-securitypolicy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-securitypolicy-editor appscode/gatewayenvoyproxyio-securitypolicy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewayenvoyproxyio-securitypolicy-editor appscode/gatewayenvoyproxyio-securitypolicy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingk8sio-backendlbpolicy-editor/Chart.yaml b/charts/gatewaynetworkingk8sio-backendlbpolicy-editor/Chart.yaml index 5bfd3041f2..29d2aa28da 100644 --- a/charts/gatewaynetworkingk8sio-backendlbpolicy-editor/Chart.yaml +++ b/charts/gatewaynetworkingk8sio-backendlbpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.k8s.io","version":"v1alpha2","resource":"backendlbpolicies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: BackendLBPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingk8sio-backendlbpolicy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewaynetworkingk8sio-backendlbpolicy-editor/README.md b/charts/gatewaynetworkingk8sio-backendlbpolicy-editor/README.md index f518770db1..78089becf3 100644 --- a/charts/gatewaynetworkingk8sio-backendlbpolicy-editor/README.md +++ b/charts/gatewaynetworkingk8sio-backendlbpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingk8sio-backendlbpolicy-editor --version=v0.38.0 -$ helm upgrade -i gatewaynetworkingk8sio-backendlbpolicy-editor appscode/gatewaynetworkingk8sio-backendlbpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewaynetworkingk8sio-backendlbpolicy-editor --version=v0.39.0 +$ helm upgrade -i gatewaynetworkingk8sio-backendlbpolicy-editor appscode/gatewaynetworkingk8sio-backendlbpolicy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackendLBPolicy Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `gatewaynetworkingk8sio-backendlbpolicy-editor`: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-backendlbpolicy-editor appscode/gatewaynetworkingk8sio-backendlbpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewaynetworkingk8sio-backendlbpolicy-editor appscode/gatewaynetworkingk8sio-backendlbpolicy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a BackendLBPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-backendlbpolicy-editor appscode/gatewaynetworkingk8sio-backendlbpolicy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.networking.k8s.io/v1alpha2 +$ helm upgrade -i gatewaynetworkingk8sio-backendlbpolicy-editor appscode/gatewaynetworkingk8sio-backendlbpolicy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.networking.k8s.io/v1alpha2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-backendlbpolicy-editor appscode/gatewaynetworkingk8sio-backendlbpolicy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingk8sio-backendlbpolicy-editor appscode/gatewaynetworkingk8sio-backendlbpolicy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingk8sio-backendtlspolicy-editor/Chart.yaml b/charts/gatewaynetworkingk8sio-backendtlspolicy-editor/Chart.yaml index 419b69d211..de3fc1ff29 100644 --- a/charts/gatewaynetworkingk8sio-backendtlspolicy-editor/Chart.yaml +++ b/charts/gatewaynetworkingk8sio-backendtlspolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.k8s.io","version":"v1","resource":"backendtlspolicies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: BackendTLSPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingk8sio-backendtlspolicy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewaynetworkingk8sio-backendtlspolicy-editor/README.md b/charts/gatewaynetworkingk8sio-backendtlspolicy-editor/README.md index d7cab59e88..62b8837fc7 100644 --- a/charts/gatewaynetworkingk8sio-backendtlspolicy-editor/README.md +++ b/charts/gatewaynetworkingk8sio-backendtlspolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingk8sio-backendtlspolicy-editor --version=v0.38.0 -$ helm upgrade -i gatewaynetworkingk8sio-backendtlspolicy-editor appscode/gatewaynetworkingk8sio-backendtlspolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewaynetworkingk8sio-backendtlspolicy-editor --version=v0.39.0 +$ helm upgrade -i gatewaynetworkingk8sio-backendtlspolicy-editor appscode/gatewaynetworkingk8sio-backendtlspolicy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackendTLSPolicy Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `gatewaynetworkingk8sio-backendtlspolicy-editor`: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-backendtlspolicy-editor appscode/gatewaynetworkingk8sio-backendtlspolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewaynetworkingk8sio-backendtlspolicy-editor appscode/gatewaynetworkingk8sio-backendtlspolicy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a BackendTLSPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-backendtlspolicy-editor appscode/gatewaynetworkingk8sio-backendtlspolicy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.networking.k8s.io/v1 +$ helm upgrade -i gatewaynetworkingk8sio-backendtlspolicy-editor appscode/gatewaynetworkingk8sio-backendtlspolicy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.networking.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-backendtlspolicy-editor appscode/gatewaynetworkingk8sio-backendtlspolicy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingk8sio-backendtlspolicy-editor appscode/gatewaynetworkingk8sio-backendtlspolicy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingk8sio-gateway-editor/Chart.yaml b/charts/gatewaynetworkingk8sio-gateway-editor/Chart.yaml index 27dc724169..262335ec61 100644 --- a/charts/gatewaynetworkingk8sio-gateway-editor/Chart.yaml +++ b/charts/gatewaynetworkingk8sio-gateway-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.k8s.io","version":"v1","resource":"gateways"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Gateway Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingk8sio-gateway-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewaynetworkingk8sio-gateway-editor/README.md b/charts/gatewaynetworkingk8sio-gateway-editor/README.md index becd157c65..5750fc7939 100644 --- a/charts/gatewaynetworkingk8sio-gateway-editor/README.md +++ b/charts/gatewaynetworkingk8sio-gateway-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingk8sio-gateway-editor --version=v0.38.0 -$ helm upgrade -i gatewaynetworkingk8sio-gateway-editor appscode/gatewaynetworkingk8sio-gateway-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewaynetworkingk8sio-gateway-editor --version=v0.39.0 +$ helm upgrade -i gatewaynetworkingk8sio-gateway-editor appscode/gatewaynetworkingk8sio-gateway-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Gateway Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `gatewaynetworkingk8sio-gateway-editor`: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-gateway-editor appscode/gatewaynetworkingk8sio-gateway-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewaynetworkingk8sio-gateway-editor appscode/gatewaynetworkingk8sio-gateway-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Gateway Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-gateway-editor appscode/gatewaynetworkingk8sio-gateway-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.networking.k8s.io/v1 +$ helm upgrade -i gatewaynetworkingk8sio-gateway-editor appscode/gatewaynetworkingk8sio-gateway-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.networking.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-gateway-editor appscode/gatewaynetworkingk8sio-gateway-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingk8sio-gateway-editor appscode/gatewaynetworkingk8sio-gateway-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingk8sio-gatewayclass-editor/Chart.yaml b/charts/gatewaynetworkingk8sio-gatewayclass-editor/Chart.yaml index 0c96cf1112..62aebe23fb 100644 --- a/charts/gatewaynetworkingk8sio-gatewayclass-editor/Chart.yaml +++ b/charts/gatewaynetworkingk8sio-gatewayclass-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.k8s.io","version":"v1","resource":"gatewayclasses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GatewayClass Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingk8sio-gatewayclass-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewaynetworkingk8sio-gatewayclass-editor/README.md b/charts/gatewaynetworkingk8sio-gatewayclass-editor/README.md index c9307bc36d..8afc2d57dc 100644 --- a/charts/gatewaynetworkingk8sio-gatewayclass-editor/README.md +++ b/charts/gatewaynetworkingk8sio-gatewayclass-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingk8sio-gatewayclass-editor --version=v0.38.0 -$ helm upgrade -i gatewaynetworkingk8sio-gatewayclass-editor appscode/gatewaynetworkingk8sio-gatewayclass-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewaynetworkingk8sio-gatewayclass-editor --version=v0.39.0 +$ helm upgrade -i gatewaynetworkingk8sio-gatewayclass-editor appscode/gatewaynetworkingk8sio-gatewayclass-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GatewayClass Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `gatewaynetworkingk8sio-gatewayclass-editor`: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-gatewayclass-editor appscode/gatewaynetworkingk8sio-gatewayclass-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewaynetworkingk8sio-gatewayclass-editor appscode/gatewaynetworkingk8sio-gatewayclass-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GatewayClass Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-gatewayclass-editor appscode/gatewaynetworkingk8sio-gatewayclass-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.networking.k8s.io/v1 +$ helm upgrade -i gatewaynetworkingk8sio-gatewayclass-editor appscode/gatewaynetworkingk8sio-gatewayclass-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.networking.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-gatewayclass-editor appscode/gatewaynetworkingk8sio-gatewayclass-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingk8sio-gatewayclass-editor appscode/gatewaynetworkingk8sio-gatewayclass-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingk8sio-grpcroute-editor/Chart.yaml b/charts/gatewaynetworkingk8sio-grpcroute-editor/Chart.yaml index d95ca86c13..322d639039 100644 --- a/charts/gatewaynetworkingk8sio-grpcroute-editor/Chart.yaml +++ b/charts/gatewaynetworkingk8sio-grpcroute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.k8s.io","version":"v1","resource":"grpcroutes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GRPCRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingk8sio-grpcroute-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewaynetworkingk8sio-grpcroute-editor/README.md b/charts/gatewaynetworkingk8sio-grpcroute-editor/README.md index d25373cdbb..05ca5b37fb 100644 --- a/charts/gatewaynetworkingk8sio-grpcroute-editor/README.md +++ b/charts/gatewaynetworkingk8sio-grpcroute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingk8sio-grpcroute-editor --version=v0.38.0 -$ helm upgrade -i gatewaynetworkingk8sio-grpcroute-editor appscode/gatewaynetworkingk8sio-grpcroute-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewaynetworkingk8sio-grpcroute-editor --version=v0.39.0 +$ helm upgrade -i gatewaynetworkingk8sio-grpcroute-editor appscode/gatewaynetworkingk8sio-grpcroute-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GRPCRoute Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `gatewaynetworkingk8sio-grpcroute-editor`: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-grpcroute-editor appscode/gatewaynetworkingk8sio-grpcroute-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewaynetworkingk8sio-grpcroute-editor appscode/gatewaynetworkingk8sio-grpcroute-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GRPCRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-grpcroute-editor appscode/gatewaynetworkingk8sio-grpcroute-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.networking.k8s.io/v1 +$ helm upgrade -i gatewaynetworkingk8sio-grpcroute-editor appscode/gatewaynetworkingk8sio-grpcroute-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.networking.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-grpcroute-editor appscode/gatewaynetworkingk8sio-grpcroute-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingk8sio-grpcroute-editor appscode/gatewaynetworkingk8sio-grpcroute-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingk8sio-httproute-editor/Chart.yaml b/charts/gatewaynetworkingk8sio-httproute-editor/Chart.yaml index 7d0e00286c..2ab65a4842 100644 --- a/charts/gatewaynetworkingk8sio-httproute-editor/Chart.yaml +++ b/charts/gatewaynetworkingk8sio-httproute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.k8s.io","version":"v1","resource":"httproutes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: HTTPRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingk8sio-httproute-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewaynetworkingk8sio-httproute-editor/README.md b/charts/gatewaynetworkingk8sio-httproute-editor/README.md index bb2b50b55c..69265f34f3 100644 --- a/charts/gatewaynetworkingk8sio-httproute-editor/README.md +++ b/charts/gatewaynetworkingk8sio-httproute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingk8sio-httproute-editor --version=v0.38.0 -$ helm upgrade -i gatewaynetworkingk8sio-httproute-editor appscode/gatewaynetworkingk8sio-httproute-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewaynetworkingk8sio-httproute-editor --version=v0.39.0 +$ helm upgrade -i gatewaynetworkingk8sio-httproute-editor appscode/gatewaynetworkingk8sio-httproute-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HTTPRoute Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `gatewaynetworkingk8sio-httproute-editor`: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-httproute-editor appscode/gatewaynetworkingk8sio-httproute-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewaynetworkingk8sio-httproute-editor appscode/gatewaynetworkingk8sio-httproute-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a HTTPRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-httproute-editor appscode/gatewaynetworkingk8sio-httproute-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.networking.k8s.io/v1 +$ helm upgrade -i gatewaynetworkingk8sio-httproute-editor appscode/gatewaynetworkingk8sio-httproute-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.networking.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-httproute-editor appscode/gatewaynetworkingk8sio-httproute-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingk8sio-httproute-editor appscode/gatewaynetworkingk8sio-httproute-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingk8sio-referencegrant-editor/Chart.yaml b/charts/gatewaynetworkingk8sio-referencegrant-editor/Chart.yaml index f105ddcd27..614963a089 100644 --- a/charts/gatewaynetworkingk8sio-referencegrant-editor/Chart.yaml +++ b/charts/gatewaynetworkingk8sio-referencegrant-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.k8s.io","version":"v1beta1","resource":"referencegrants"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ReferenceGrant Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingk8sio-referencegrant-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewaynetworkingk8sio-referencegrant-editor/README.md b/charts/gatewaynetworkingk8sio-referencegrant-editor/README.md index a58fafc40e..65ebeb10f9 100644 --- a/charts/gatewaynetworkingk8sio-referencegrant-editor/README.md +++ b/charts/gatewaynetworkingk8sio-referencegrant-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingk8sio-referencegrant-editor --version=v0.38.0 -$ helm upgrade -i gatewaynetworkingk8sio-referencegrant-editor appscode/gatewaynetworkingk8sio-referencegrant-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewaynetworkingk8sio-referencegrant-editor --version=v0.39.0 +$ helm upgrade -i gatewaynetworkingk8sio-referencegrant-editor appscode/gatewaynetworkingk8sio-referencegrant-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ReferenceGrant Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `gatewaynetworkingk8sio-referencegrant-editor`: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-referencegrant-editor appscode/gatewaynetworkingk8sio-referencegrant-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewaynetworkingk8sio-referencegrant-editor appscode/gatewaynetworkingk8sio-referencegrant-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ReferenceGrant Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-referencegrant-editor appscode/gatewaynetworkingk8sio-referencegrant-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.networking.k8s.io/v1beta1 +$ helm upgrade -i gatewaynetworkingk8sio-referencegrant-editor appscode/gatewaynetworkingk8sio-referencegrant-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.networking.k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-referencegrant-editor appscode/gatewaynetworkingk8sio-referencegrant-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingk8sio-referencegrant-editor appscode/gatewaynetworkingk8sio-referencegrant-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingk8sio-tcproute-editor/Chart.yaml b/charts/gatewaynetworkingk8sio-tcproute-editor/Chart.yaml index 4258f848a3..b10b3462be 100644 --- a/charts/gatewaynetworkingk8sio-tcproute-editor/Chart.yaml +++ b/charts/gatewaynetworkingk8sio-tcproute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.k8s.io","version":"v1alpha2","resource":"tcproutes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: TCPRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingk8sio-tcproute-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewaynetworkingk8sio-tcproute-editor/README.md b/charts/gatewaynetworkingk8sio-tcproute-editor/README.md index 53726c5203..233aa708d0 100644 --- a/charts/gatewaynetworkingk8sio-tcproute-editor/README.md +++ b/charts/gatewaynetworkingk8sio-tcproute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingk8sio-tcproute-editor --version=v0.38.0 -$ helm upgrade -i gatewaynetworkingk8sio-tcproute-editor appscode/gatewaynetworkingk8sio-tcproute-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewaynetworkingk8sio-tcproute-editor --version=v0.39.0 +$ helm upgrade -i gatewaynetworkingk8sio-tcproute-editor appscode/gatewaynetworkingk8sio-tcproute-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a TCPRoute Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `gatewaynetworkingk8sio-tcproute-editor`: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-tcproute-editor appscode/gatewaynetworkingk8sio-tcproute-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewaynetworkingk8sio-tcproute-editor appscode/gatewaynetworkingk8sio-tcproute-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a TCPRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-tcproute-editor appscode/gatewaynetworkingk8sio-tcproute-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.networking.k8s.io/v1alpha2 +$ helm upgrade -i gatewaynetworkingk8sio-tcproute-editor appscode/gatewaynetworkingk8sio-tcproute-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.networking.k8s.io/v1alpha2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-tcproute-editor appscode/gatewaynetworkingk8sio-tcproute-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingk8sio-tcproute-editor appscode/gatewaynetworkingk8sio-tcproute-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingk8sio-tlsroute-editor/Chart.yaml b/charts/gatewaynetworkingk8sio-tlsroute-editor/Chart.yaml index b56eda159f..2ef42f6e8a 100644 --- a/charts/gatewaynetworkingk8sio-tlsroute-editor/Chart.yaml +++ b/charts/gatewaynetworkingk8sio-tlsroute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.k8s.io","version":"v1alpha3","resource":"tlsroutes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: TLSRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingk8sio-tlsroute-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewaynetworkingk8sio-tlsroute-editor/README.md b/charts/gatewaynetworkingk8sio-tlsroute-editor/README.md index 2667a35bf8..614baae1ff 100644 --- a/charts/gatewaynetworkingk8sio-tlsroute-editor/README.md +++ b/charts/gatewaynetworkingk8sio-tlsroute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingk8sio-tlsroute-editor --version=v0.38.0 -$ helm upgrade -i gatewaynetworkingk8sio-tlsroute-editor appscode/gatewaynetworkingk8sio-tlsroute-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewaynetworkingk8sio-tlsroute-editor --version=v0.39.0 +$ helm upgrade -i gatewaynetworkingk8sio-tlsroute-editor appscode/gatewaynetworkingk8sio-tlsroute-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a TLSRoute Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `gatewaynetworkingk8sio-tlsroute-editor`: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-tlsroute-editor appscode/gatewaynetworkingk8sio-tlsroute-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewaynetworkingk8sio-tlsroute-editor appscode/gatewaynetworkingk8sio-tlsroute-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a TLSRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-tlsroute-editor appscode/gatewaynetworkingk8sio-tlsroute-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.networking.k8s.io/v1alpha3 +$ helm upgrade -i gatewaynetworkingk8sio-tlsroute-editor appscode/gatewaynetworkingk8sio-tlsroute-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.networking.k8s.io/v1alpha3 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-tlsroute-editor appscode/gatewaynetworkingk8sio-tlsroute-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingk8sio-tlsroute-editor appscode/gatewaynetworkingk8sio-tlsroute-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingk8sio-udproute-editor/Chart.yaml b/charts/gatewaynetworkingk8sio-udproute-editor/Chart.yaml index ba117d42dd..b33b51dae9 100644 --- a/charts/gatewaynetworkingk8sio-udproute-editor/Chart.yaml +++ b/charts/gatewaynetworkingk8sio-udproute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.k8s.io","version":"v1alpha2","resource":"udproutes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: UDPRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingk8sio-udproute-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewaynetworkingk8sio-udproute-editor/README.md b/charts/gatewaynetworkingk8sio-udproute-editor/README.md index 3dcd976f83..0715c7f652 100644 --- a/charts/gatewaynetworkingk8sio-udproute-editor/README.md +++ b/charts/gatewaynetworkingk8sio-udproute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingk8sio-udproute-editor --version=v0.38.0 -$ helm upgrade -i gatewaynetworkingk8sio-udproute-editor appscode/gatewaynetworkingk8sio-udproute-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewaynetworkingk8sio-udproute-editor --version=v0.39.0 +$ helm upgrade -i gatewaynetworkingk8sio-udproute-editor appscode/gatewaynetworkingk8sio-udproute-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a UDPRoute Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `gatewaynetworkingk8sio-udproute-editor`: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-udproute-editor appscode/gatewaynetworkingk8sio-udproute-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewaynetworkingk8sio-udproute-editor appscode/gatewaynetworkingk8sio-udproute-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a UDPRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-udproute-editor appscode/gatewaynetworkingk8sio-udproute-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.networking.k8s.io/v1alpha2 +$ helm upgrade -i gatewaynetworkingk8sio-udproute-editor appscode/gatewaynetworkingk8sio-udproute-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.networking.k8s.io/v1alpha2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-udproute-editor appscode/gatewaynetworkingk8sio-udproute-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingk8sio-udproute-editor appscode/gatewaynetworkingk8sio-udproute-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor/Chart.yaml b/charts/gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor/Chart.yaml index 826222d5ca..fc00d10bf4 100644 --- a/charts/gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor/Chart.yaml +++ b/charts/gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.x-k8s.io","version":"v1alpha1","resource":"xbackendtrafficpolicies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: XBackendTrafficPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor/README.md b/charts/gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor/README.md index 25dfbdc04b..704170576c 100644 --- a/charts/gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor/README.md +++ b/charts/gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor --version=v0.38.0 -$ helm upgrade -i gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor appscode/gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor --version=v0.39.0 +$ helm upgrade -i gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor appscode/gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a XBackendTrafficPolicy Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor`: ```bash -$ helm upgrade -i gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor appscode/gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor appscode/gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a XBackendTrafficPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingx Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor appscode/gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.networking.x-k8s.io/v1alpha1 +$ helm upgrade -i gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor appscode/gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.networking.x-k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor appscode/gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor appscode/gatewaynetworkingxk8sio-xbackendtrafficpolicy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingxk8sio-xlistenerset-editor/Chart.yaml b/charts/gatewaynetworkingxk8sio-xlistenerset-editor/Chart.yaml index 06b22191ae..1a2686f753 100644 --- a/charts/gatewaynetworkingxk8sio-xlistenerset-editor/Chart.yaml +++ b/charts/gatewaynetworkingxk8sio-xlistenerset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.x-k8s.io","version":"v1alpha1","resource":"xlistenersets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: XListenerSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingxk8sio-xlistenerset-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewaynetworkingxk8sio-xlistenerset-editor/README.md b/charts/gatewaynetworkingxk8sio-xlistenerset-editor/README.md index a6b63ff1b9..0e8468d42a 100644 --- a/charts/gatewaynetworkingxk8sio-xlistenerset-editor/README.md +++ b/charts/gatewaynetworkingxk8sio-xlistenerset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingxk8sio-xlistenerset-editor --version=v0.38.0 -$ helm upgrade -i gatewaynetworkingxk8sio-xlistenerset-editor appscode/gatewaynetworkingxk8sio-xlistenerset-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewaynetworkingxk8sio-xlistenerset-editor --version=v0.39.0 +$ helm upgrade -i gatewaynetworkingxk8sio-xlistenerset-editor appscode/gatewaynetworkingxk8sio-xlistenerset-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a XListenerSet Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `gatewaynetworkingxk8sio-xlistenerset-editor`: ```bash -$ helm upgrade -i gatewaynetworkingxk8sio-xlistenerset-editor appscode/gatewaynetworkingxk8sio-xlistenerset-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewaynetworkingxk8sio-xlistenerset-editor appscode/gatewaynetworkingxk8sio-xlistenerset-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a XListenerSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingx Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingxk8sio-xlistenerset-editor appscode/gatewaynetworkingxk8sio-xlistenerset-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.networking.x-k8s.io/v1alpha1 +$ helm upgrade -i gatewaynetworkingxk8sio-xlistenerset-editor appscode/gatewaynetworkingxk8sio-xlistenerset-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.networking.x-k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingxk8sio-xlistenerset-editor appscode/gatewaynetworkingxk8sio-xlistenerset-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingxk8sio-xlistenerset-editor appscode/gatewaynetworkingxk8sio-xlistenerset-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingxk8sio-xmesh-editor/Chart.yaml b/charts/gatewaynetworkingxk8sio-xmesh-editor/Chart.yaml index 78d13f546f..bff5bd2ce6 100644 --- a/charts/gatewaynetworkingxk8sio-xmesh-editor/Chart.yaml +++ b/charts/gatewaynetworkingxk8sio-xmesh-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.x-k8s.io","version":"v1alpha1","resource":"xmeshes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: XMesh Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingxk8sio-xmesh-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewaynetworkingxk8sio-xmesh-editor/README.md b/charts/gatewaynetworkingxk8sio-xmesh-editor/README.md index 586600bad5..dadb2ef9d3 100644 --- a/charts/gatewaynetworkingxk8sio-xmesh-editor/README.md +++ b/charts/gatewaynetworkingxk8sio-xmesh-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingxk8sio-xmesh-editor --version=v0.38.0 -$ helm upgrade -i gatewaynetworkingxk8sio-xmesh-editor appscode/gatewaynetworkingxk8sio-xmesh-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewaynetworkingxk8sio-xmesh-editor --version=v0.39.0 +$ helm upgrade -i gatewaynetworkingxk8sio-xmesh-editor appscode/gatewaynetworkingxk8sio-xmesh-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a XMesh Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `gatewaynetworkingxk8sio-xmesh-editor`: ```bash -$ helm upgrade -i gatewaynetworkingxk8sio-xmesh-editor appscode/gatewaynetworkingxk8sio-xmesh-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewaynetworkingxk8sio-xmesh-editor appscode/gatewaynetworkingxk8sio-xmesh-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a XMesh Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingx Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingxk8sio-xmesh-editor appscode/gatewaynetworkingxk8sio-xmesh-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.networking.x-k8s.io/v1alpha1 +$ helm upgrade -i gatewaynetworkingxk8sio-xmesh-editor appscode/gatewaynetworkingxk8sio-xmesh-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.networking.x-k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingxk8sio-xmesh-editor appscode/gatewaynetworkingxk8sio-xmesh-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingxk8sio-xmesh-editor appscode/gatewaynetworkingxk8sio-xmesh-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewayopenclustermanagementio-clustergateway-editor/Chart.yaml b/charts/gatewayopenclustermanagementio-clustergateway-editor/Chart.yaml index 31775c7cf5..5284b93e1e 100644 --- a/charts/gatewayopenclustermanagementio-clustergateway-editor/Chart.yaml +++ b/charts/gatewayopenclustermanagementio-clustergateway-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.open-cluster-management.io","version":"v1alpha1","resource":"clustergateways"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterGateway Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayopenclustermanagementio-clustergateway-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewayopenclustermanagementio-clustergateway-editor/README.md b/charts/gatewayopenclustermanagementio-clustergateway-editor/README.md index d267e0f627..9a60b10d61 100644 --- a/charts/gatewayopenclustermanagementio-clustergateway-editor/README.md +++ b/charts/gatewayopenclustermanagementio-clustergateway-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayopenclustermanagementio-clustergateway-editor --version=v0.38.0 -$ helm upgrade -i gatewayopenclustermanagementio-clustergateway-editor appscode/gatewayopenclustermanagementio-clustergateway-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewayopenclustermanagementio-clustergateway-editor --version=v0.39.0 +$ helm upgrade -i gatewayopenclustermanagementio-clustergateway-editor appscode/gatewayopenclustermanagementio-clustergateway-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterGateway Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `gatewayopenclustermanagementio-clustergateway-editor`: ```bash -$ helm upgrade -i gatewayopenclustermanagementio-clustergateway-editor appscode/gatewayopenclustermanagementio-clustergateway-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewayopenclustermanagementio-clustergateway-editor appscode/gatewayopenclustermanagementio-clustergateway-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterGateway Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayopencluster Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayopenclustermanagementio-clustergateway-editor appscode/gatewayopenclustermanagementio-clustergateway-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.open-cluster-management.io/v1alpha1 +$ helm upgrade -i gatewayopenclustermanagementio-clustergateway-editor appscode/gatewayopenclustermanagementio-clustergateway-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayopenclustermanagementio-clustergateway-editor appscode/gatewayopenclustermanagementio-clustergateway-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewayopenclustermanagementio-clustergateway-editor appscode/gatewayopenclustermanagementio-clustergateway-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewayvoyagermeshcom-kafkaroute-editor/Chart.yaml b/charts/gatewayvoyagermeshcom-kafkaroute-editor/Chart.yaml index e23c6f72ce..02edd0d7eb 100644 --- a/charts/gatewayvoyagermeshcom-kafkaroute-editor/Chart.yaml +++ b/charts/gatewayvoyagermeshcom-kafkaroute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.voyagermesh.com","version":"v1alpha1","resource":"kafkaroutes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: KafkaRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayvoyagermeshcom-kafkaroute-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewayvoyagermeshcom-kafkaroute-editor/README.md b/charts/gatewayvoyagermeshcom-kafkaroute-editor/README.md index 5f9d742b9f..8d8b11e947 100644 --- a/charts/gatewayvoyagermeshcom-kafkaroute-editor/README.md +++ b/charts/gatewayvoyagermeshcom-kafkaroute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayvoyagermeshcom-kafkaroute-editor --version=v0.38.0 -$ helm upgrade -i gatewayvoyagermeshcom-kafkaroute-editor appscode/gatewayvoyagermeshcom-kafkaroute-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewayvoyagermeshcom-kafkaroute-editor --version=v0.39.0 +$ helm upgrade -i gatewayvoyagermeshcom-kafkaroute-editor appscode/gatewayvoyagermeshcom-kafkaroute-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a KafkaRoute Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `gatewayvoyagermeshcom-kafkaroute-editor`: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-kafkaroute-editor appscode/gatewayvoyagermeshcom-kafkaroute-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewayvoyagermeshcom-kafkaroute-editor appscode/gatewayvoyagermeshcom-kafkaroute-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a KafkaRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayvoyagermesh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-kafkaroute-editor appscode/gatewayvoyagermeshcom-kafkaroute-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 +$ helm upgrade -i gatewayvoyagermeshcom-kafkaroute-editor appscode/gatewayvoyagermeshcom-kafkaroute-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-kafkaroute-editor appscode/gatewayvoyagermeshcom-kafkaroute-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewayvoyagermeshcom-kafkaroute-editor appscode/gatewayvoyagermeshcom-kafkaroute-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewayvoyagermeshcom-mongodbroute-editor/Chart.yaml b/charts/gatewayvoyagermeshcom-mongodbroute-editor/Chart.yaml index a2d826688d..e238e299a0 100644 --- a/charts/gatewayvoyagermeshcom-mongodbroute-editor/Chart.yaml +++ b/charts/gatewayvoyagermeshcom-mongodbroute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.voyagermesh.com","version":"v1alpha1","resource":"mongodbroutes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MongoDBRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayvoyagermeshcom-mongodbroute-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewayvoyagermeshcom-mongodbroute-editor/README.md b/charts/gatewayvoyagermeshcom-mongodbroute-editor/README.md index a348b9859f..c7f5efc345 100644 --- a/charts/gatewayvoyagermeshcom-mongodbroute-editor/README.md +++ b/charts/gatewayvoyagermeshcom-mongodbroute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayvoyagermeshcom-mongodbroute-editor --version=v0.38.0 -$ helm upgrade -i gatewayvoyagermeshcom-mongodbroute-editor appscode/gatewayvoyagermeshcom-mongodbroute-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewayvoyagermeshcom-mongodbroute-editor --version=v0.39.0 +$ helm upgrade -i gatewayvoyagermeshcom-mongodbroute-editor appscode/gatewayvoyagermeshcom-mongodbroute-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBRoute Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `gatewayvoyagermeshcom-mongodbroute-editor`: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-mongodbroute-editor appscode/gatewayvoyagermeshcom-mongodbroute-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewayvoyagermeshcom-mongodbroute-editor appscode/gatewayvoyagermeshcom-mongodbroute-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MongoDBRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayvoyagermesh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-mongodbroute-editor appscode/gatewayvoyagermeshcom-mongodbroute-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 +$ helm upgrade -i gatewayvoyagermeshcom-mongodbroute-editor appscode/gatewayvoyagermeshcom-mongodbroute-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-mongodbroute-editor appscode/gatewayvoyagermeshcom-mongodbroute-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewayvoyagermeshcom-mongodbroute-editor appscode/gatewayvoyagermeshcom-mongodbroute-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewayvoyagermeshcom-mssqlserverroute-editor/Chart.yaml b/charts/gatewayvoyagermeshcom-mssqlserverroute-editor/Chart.yaml index 93f76398aa..3a349ea486 100644 --- a/charts/gatewayvoyagermeshcom-mssqlserverroute-editor/Chart.yaml +++ b/charts/gatewayvoyagermeshcom-mssqlserverroute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.voyagermesh.com","version":"v1alpha1","resource":"mssqlserverroutes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLServerRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayvoyagermeshcom-mssqlserverroute-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewayvoyagermeshcom-mssqlserverroute-editor/README.md b/charts/gatewayvoyagermeshcom-mssqlserverroute-editor/README.md index 9c3e8cca9c..47f1c5e4a3 100644 --- a/charts/gatewayvoyagermeshcom-mssqlserverroute-editor/README.md +++ b/charts/gatewayvoyagermeshcom-mssqlserverroute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayvoyagermeshcom-mssqlserverroute-editor --version=v0.38.0 -$ helm upgrade -i gatewayvoyagermeshcom-mssqlserverroute-editor appscode/gatewayvoyagermeshcom-mssqlserverroute-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewayvoyagermeshcom-mssqlserverroute-editor --version=v0.39.0 +$ helm upgrade -i gatewayvoyagermeshcom-mssqlserverroute-editor appscode/gatewayvoyagermeshcom-mssqlserverroute-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerRoute Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `gatewayvoyagermeshcom-mssqlserverroute-editor`: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-mssqlserverroute-editor appscode/gatewayvoyagermeshcom-mssqlserverroute-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewayvoyagermeshcom-mssqlserverroute-editor appscode/gatewayvoyagermeshcom-mssqlserverroute-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLServerRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayvoyagermesh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-mssqlserverroute-editor appscode/gatewayvoyagermeshcom-mssqlserverroute-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 +$ helm upgrade -i gatewayvoyagermeshcom-mssqlserverroute-editor appscode/gatewayvoyagermeshcom-mssqlserverroute-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-mssqlserverroute-editor appscode/gatewayvoyagermeshcom-mssqlserverroute-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewayvoyagermeshcom-mssqlserverroute-editor appscode/gatewayvoyagermeshcom-mssqlserverroute-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewayvoyagermeshcom-mysqlroute-editor/Chart.yaml b/charts/gatewayvoyagermeshcom-mysqlroute-editor/Chart.yaml index bbd144564b..ff0eb4370c 100644 --- a/charts/gatewayvoyagermeshcom-mysqlroute-editor/Chart.yaml +++ b/charts/gatewayvoyagermeshcom-mysqlroute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.voyagermesh.com","version":"v1alpha1","resource":"mysqlroutes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MySQLRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayvoyagermeshcom-mysqlroute-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewayvoyagermeshcom-mysqlroute-editor/README.md b/charts/gatewayvoyagermeshcom-mysqlroute-editor/README.md index dedb8ec20d..5251ac40b2 100644 --- a/charts/gatewayvoyagermeshcom-mysqlroute-editor/README.md +++ b/charts/gatewayvoyagermeshcom-mysqlroute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayvoyagermeshcom-mysqlroute-editor --version=v0.38.0 -$ helm upgrade -i gatewayvoyagermeshcom-mysqlroute-editor appscode/gatewayvoyagermeshcom-mysqlroute-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewayvoyagermeshcom-mysqlroute-editor --version=v0.39.0 +$ helm upgrade -i gatewayvoyagermeshcom-mysqlroute-editor appscode/gatewayvoyagermeshcom-mysqlroute-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLRoute Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `gatewayvoyagermeshcom-mysqlroute-editor`: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-mysqlroute-editor appscode/gatewayvoyagermeshcom-mysqlroute-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewayvoyagermeshcom-mysqlroute-editor appscode/gatewayvoyagermeshcom-mysqlroute-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MySQLRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayvoyagermesh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-mysqlroute-editor appscode/gatewayvoyagermeshcom-mysqlroute-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 +$ helm upgrade -i gatewayvoyagermeshcom-mysqlroute-editor appscode/gatewayvoyagermeshcom-mysqlroute-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-mysqlroute-editor appscode/gatewayvoyagermeshcom-mysqlroute-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewayvoyagermeshcom-mysqlroute-editor appscode/gatewayvoyagermeshcom-mysqlroute-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewayvoyagermeshcom-oracleroute-editor/Chart.yaml b/charts/gatewayvoyagermeshcom-oracleroute-editor/Chart.yaml index e06cbf6a42..b740ce0b9e 100644 --- a/charts/gatewayvoyagermeshcom-oracleroute-editor/Chart.yaml +++ b/charts/gatewayvoyagermeshcom-oracleroute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.voyagermesh.com","version":"v1alpha1","resource":"oracleroutes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: OracleRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayvoyagermeshcom-oracleroute-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewayvoyagermeshcom-oracleroute-editor/README.md b/charts/gatewayvoyagermeshcom-oracleroute-editor/README.md index 952180c927..7994021a85 100644 --- a/charts/gatewayvoyagermeshcom-oracleroute-editor/README.md +++ b/charts/gatewayvoyagermeshcom-oracleroute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayvoyagermeshcom-oracleroute-editor --version=v0.38.0 -$ helm upgrade -i gatewayvoyagermeshcom-oracleroute-editor appscode/gatewayvoyagermeshcom-oracleroute-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewayvoyagermeshcom-oracleroute-editor --version=v0.39.0 +$ helm upgrade -i gatewayvoyagermeshcom-oracleroute-editor appscode/gatewayvoyagermeshcom-oracleroute-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a OracleRoute Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `gatewayvoyagermeshcom-oracleroute-editor`: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-oracleroute-editor appscode/gatewayvoyagermeshcom-oracleroute-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewayvoyagermeshcom-oracleroute-editor appscode/gatewayvoyagermeshcom-oracleroute-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a OracleRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayvoyagermesh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-oracleroute-editor appscode/gatewayvoyagermeshcom-oracleroute-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 +$ helm upgrade -i gatewayvoyagermeshcom-oracleroute-editor appscode/gatewayvoyagermeshcom-oracleroute-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-oracleroute-editor appscode/gatewayvoyagermeshcom-oracleroute-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewayvoyagermeshcom-oracleroute-editor appscode/gatewayvoyagermeshcom-oracleroute-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewayvoyagermeshcom-postgresroute-editor/Chart.yaml b/charts/gatewayvoyagermeshcom-postgresroute-editor/Chart.yaml index 3214d50c69..0ae1195629 100644 --- a/charts/gatewayvoyagermeshcom-postgresroute-editor/Chart.yaml +++ b/charts/gatewayvoyagermeshcom-postgresroute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.voyagermesh.com","version":"v1alpha1","resource":"postgresroutes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PostgresRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayvoyagermeshcom-postgresroute-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewayvoyagermeshcom-postgresroute-editor/README.md b/charts/gatewayvoyagermeshcom-postgresroute-editor/README.md index d103a36535..74b8239b41 100644 --- a/charts/gatewayvoyagermeshcom-postgresroute-editor/README.md +++ b/charts/gatewayvoyagermeshcom-postgresroute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayvoyagermeshcom-postgresroute-editor --version=v0.38.0 -$ helm upgrade -i gatewayvoyagermeshcom-postgresroute-editor appscode/gatewayvoyagermeshcom-postgresroute-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewayvoyagermeshcom-postgresroute-editor --version=v0.39.0 +$ helm upgrade -i gatewayvoyagermeshcom-postgresroute-editor appscode/gatewayvoyagermeshcom-postgresroute-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresRoute Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `gatewayvoyagermeshcom-postgresroute-editor`: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-postgresroute-editor appscode/gatewayvoyagermeshcom-postgresroute-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewayvoyagermeshcom-postgresroute-editor appscode/gatewayvoyagermeshcom-postgresroute-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PostgresRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayvoyagermesh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-postgresroute-editor appscode/gatewayvoyagermeshcom-postgresroute-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 +$ helm upgrade -i gatewayvoyagermeshcom-postgresroute-editor appscode/gatewayvoyagermeshcom-postgresroute-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-postgresroute-editor appscode/gatewayvoyagermeshcom-postgresroute-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewayvoyagermeshcom-postgresroute-editor appscode/gatewayvoyagermeshcom-postgresroute-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gatewayvoyagermeshcom-redisroute-editor/Chart.yaml b/charts/gatewayvoyagermeshcom-redisroute-editor/Chart.yaml index 3ce7cd843d..0e16c6e8a8 100644 --- a/charts/gatewayvoyagermeshcom-redisroute-editor/Chart.yaml +++ b/charts/gatewayvoyagermeshcom-redisroute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.voyagermesh.com","version":"v1alpha1","resource":"redisroutes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RedisRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayvoyagermeshcom-redisroute-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gatewayvoyagermeshcom-redisroute-editor/README.md b/charts/gatewayvoyagermeshcom-redisroute-editor/README.md index 93292dab9e..36ae3c416f 100644 --- a/charts/gatewayvoyagermeshcom-redisroute-editor/README.md +++ b/charts/gatewayvoyagermeshcom-redisroute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayvoyagermeshcom-redisroute-editor --version=v0.38.0 -$ helm upgrade -i gatewayvoyagermeshcom-redisroute-editor appscode/gatewayvoyagermeshcom-redisroute-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gatewayvoyagermeshcom-redisroute-editor --version=v0.39.0 +$ helm upgrade -i gatewayvoyagermeshcom-redisroute-editor appscode/gatewayvoyagermeshcom-redisroute-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisRoute Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `gatewayvoyagermeshcom-redisroute-editor`: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-redisroute-editor appscode/gatewayvoyagermeshcom-redisroute-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gatewayvoyagermeshcom-redisroute-editor appscode/gatewayvoyagermeshcom-redisroute-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RedisRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayvoyagermesh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-redisroute-editor appscode/gatewayvoyagermeshcom-redisroute-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 +$ helm upgrade -i gatewayvoyagermeshcom-redisroute-editor appscode/gatewayvoyagermeshcom-redisroute-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-redisroute-editor appscode/gatewayvoyagermeshcom-redisroute-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gatewayvoyagermeshcom-redisroute-editor appscode/gatewayvoyagermeshcom-redisroute-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gcpkubedbcom-providerconfig-editor/Chart.yaml b/charts/gcpkubedbcom-providerconfig-editor/Chart.yaml index c2c4cb9c86..ef6829a42c 100644 --- a/charts/gcpkubedbcom-providerconfig-editor/Chart.yaml +++ b/charts/gcpkubedbcom-providerconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gcp.kubedb.com","version":"v1beta1","resource":"providerconfigs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProviderConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gcpkubedbcom-providerconfig-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gcpkubedbcom-providerconfig-editor/README.md b/charts/gcpkubedbcom-providerconfig-editor/README.md index 3cf2fe8738..f6aa1c1f6f 100644 --- a/charts/gcpkubedbcom-providerconfig-editor/README.md +++ b/charts/gcpkubedbcom-providerconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gcpkubedbcom-providerconfig-editor --version=v0.38.0 -$ helm upgrade -i gcpkubedbcom-providerconfig-editor appscode/gcpkubedbcom-providerconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gcpkubedbcom-providerconfig-editor --version=v0.39.0 +$ helm upgrade -i gcpkubedbcom-providerconfig-editor appscode/gcpkubedbcom-providerconfig-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProviderConfig Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `gcpkubedbcom-providerconfig-editor`: ```bash -$ helm upgrade -i gcpkubedbcom-providerconfig-editor appscode/gcpkubedbcom-providerconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gcpkubedbcom-providerconfig-editor appscode/gcpkubedbcom-providerconfig-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProviderConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gcpkubedbcom-provi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gcpkubedbcom-providerconfig-editor appscode/gcpkubedbcom-providerconfig-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gcp.kubedb.com/v1beta1 +$ helm upgrade -i gcpkubedbcom-providerconfig-editor appscode/gcpkubedbcom-providerconfig-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gcp.kubedb.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gcpkubedbcom-providerconfig-editor appscode/gcpkubedbcom-providerconfig-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gcpkubedbcom-providerconfig-editor appscode/gcpkubedbcom-providerconfig-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gcpkubedbcom-providerconfigusage-editor/Chart.yaml b/charts/gcpkubedbcom-providerconfigusage-editor/Chart.yaml index bcb09222b0..5ebfeb0ceb 100644 --- a/charts/gcpkubedbcom-providerconfigusage-editor/Chart.yaml +++ b/charts/gcpkubedbcom-providerconfigusage-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gcp.kubedb.com","version":"v1beta1","resource":"providerconfigusages"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProviderConfigUsage Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gcpkubedbcom-providerconfigusage-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gcpkubedbcom-providerconfigusage-editor/README.md b/charts/gcpkubedbcom-providerconfigusage-editor/README.md index 0d208832eb..7d7b1eacb8 100644 --- a/charts/gcpkubedbcom-providerconfigusage-editor/README.md +++ b/charts/gcpkubedbcom-providerconfigusage-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gcpkubedbcom-providerconfigusage-editor --version=v0.38.0 -$ helm upgrade -i gcpkubedbcom-providerconfigusage-editor appscode/gcpkubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gcpkubedbcom-providerconfigusage-editor --version=v0.39.0 +$ helm upgrade -i gcpkubedbcom-providerconfigusage-editor appscode/gcpkubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProviderConfigUsage Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `gcpkubedbcom-providerconfigusage-editor`: ```bash -$ helm upgrade -i gcpkubedbcom-providerconfigusage-editor appscode/gcpkubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gcpkubedbcom-providerconfigusage-editor appscode/gcpkubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProviderConfigUsage Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gcpkubedbcom-provi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gcpkubedbcom-providerconfigusage-editor appscode/gcpkubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gcp.kubedb.com/v1beta1 +$ helm upgrade -i gcpkubedbcom-providerconfigusage-editor appscode/gcpkubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gcp.kubedb.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gcpkubedbcom-providerconfigusage-editor appscode/gcpkubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gcpkubedbcom-providerconfigusage-editor appscode/gcpkubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gcpkubedbcom-storeconfig-editor/Chart.yaml b/charts/gcpkubedbcom-storeconfig-editor/Chart.yaml index 89087bcaa5..ba0f7a07dd 100644 --- a/charts/gcpkubedbcom-storeconfig-editor/Chart.yaml +++ b/charts/gcpkubedbcom-storeconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gcp.kubedb.com","version":"v1alpha1","resource":"storeconfigs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: StoreConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gcpkubedbcom-storeconfig-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gcpkubedbcom-storeconfig-editor/README.md b/charts/gcpkubedbcom-storeconfig-editor/README.md index 0da4242c26..39a4d3a5a0 100644 --- a/charts/gcpkubedbcom-storeconfig-editor/README.md +++ b/charts/gcpkubedbcom-storeconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gcpkubedbcom-storeconfig-editor --version=v0.38.0 -$ helm upgrade -i gcpkubedbcom-storeconfig-editor appscode/gcpkubedbcom-storeconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gcpkubedbcom-storeconfig-editor --version=v0.39.0 +$ helm upgrade -i gcpkubedbcom-storeconfig-editor appscode/gcpkubedbcom-storeconfig-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a StoreConfig Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `gcpkubedbcom-storeconfig-editor`: ```bash -$ helm upgrade -i gcpkubedbcom-storeconfig-editor appscode/gcpkubedbcom-storeconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gcpkubedbcom-storeconfig-editor appscode/gcpkubedbcom-storeconfig-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a StoreConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gcpkubedbcom-store Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gcpkubedbcom-storeconfig-editor appscode/gcpkubedbcom-storeconfig-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gcp.kubedb.com/v1alpha1 +$ helm upgrade -i gcpkubedbcom-storeconfig-editor appscode/gcpkubedbcom-storeconfig-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gcpkubedbcom-storeconfig-editor appscode/gcpkubedbcom-storeconfig-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gcpkubedbcom-storeconfig-editor appscode/gcpkubedbcom-storeconfig-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-aerospike-editor/Chart.yaml b/charts/gitopskubedbcom-aerospike-editor/Chart.yaml index 54c2cfc629..478d685bc8 100644 --- a/charts/gitopskubedbcom-aerospike-editor/Chart.yaml +++ b/charts/gitopskubedbcom-aerospike-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"aerospikes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Aerospike Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-aerospike-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-aerospike-editor/README.md b/charts/gitopskubedbcom-aerospike-editor/README.md index f9e17bb7e9..55833aa650 100644 --- a/charts/gitopskubedbcom-aerospike-editor/README.md +++ b/charts/gitopskubedbcom-aerospike-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-aerospike-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-aerospike-editor appscode/gitopskubedbcom-aerospike-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-aerospike-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-aerospike-editor appscode/gitopskubedbcom-aerospike-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Aerospike Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `gitopskubedbcom-aerospike-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-aerospike-editor appscode/gitopskubedbcom-aerospike-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-aerospike-editor appscode/gitopskubedbcom-aerospike-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Aerospike Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-ae Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-aerospike-editor appscode/gitopskubedbcom-aerospike-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-aerospike-editor appscode/gitopskubedbcom-aerospike-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-aerospike-editor appscode/gitopskubedbcom-aerospike-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-aerospike-editor appscode/gitopskubedbcom-aerospike-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-cassandra-editor/Chart.yaml b/charts/gitopskubedbcom-cassandra-editor/Chart.yaml index b258028686..4f2115f562 100644 --- a/charts/gitopskubedbcom-cassandra-editor/Chart.yaml +++ b/charts/gitopskubedbcom-cassandra-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"cassandras"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Cassandra Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-cassandra-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-cassandra-editor/README.md b/charts/gitopskubedbcom-cassandra-editor/README.md index f7621be29b..0b78c47828 100644 --- a/charts/gitopskubedbcom-cassandra-editor/README.md +++ b/charts/gitopskubedbcom-cassandra-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-cassandra-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-cassandra-editor appscode/gitopskubedbcom-cassandra-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-cassandra-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-cassandra-editor appscode/gitopskubedbcom-cassandra-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Cassandra Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `gitopskubedbcom-cassandra-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-cassandra-editor appscode/gitopskubedbcom-cassandra-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-cassandra-editor appscode/gitopskubedbcom-cassandra-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Cassandra Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-ca Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-cassandra-editor appscode/gitopskubedbcom-cassandra-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-cassandra-editor appscode/gitopskubedbcom-cassandra-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-cassandra-editor appscode/gitopskubedbcom-cassandra-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-cassandra-editor appscode/gitopskubedbcom-cassandra-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-clickhouse-editor/Chart.yaml b/charts/gitopskubedbcom-clickhouse-editor/Chart.yaml index 0cb8331a34..3d17cab545 100644 --- a/charts/gitopskubedbcom-clickhouse-editor/Chart.yaml +++ b/charts/gitopskubedbcom-clickhouse-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"clickhouses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClickHouse Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-clickhouse-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-clickhouse-editor/README.md b/charts/gitopskubedbcom-clickhouse-editor/README.md index 09080448ab..3c0f6971aa 100644 --- a/charts/gitopskubedbcom-clickhouse-editor/README.md +++ b/charts/gitopskubedbcom-clickhouse-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-clickhouse-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-clickhouse-editor appscode/gitopskubedbcom-clickhouse-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-clickhouse-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-clickhouse-editor appscode/gitopskubedbcom-clickhouse-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClickHouse Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `gitopskubedbcom-clickhouse-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-clickhouse-editor appscode/gitopskubedbcom-clickhouse-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-clickhouse-editor appscode/gitopskubedbcom-clickhouse-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClickHouse Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-cl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-clickhouse-editor appscode/gitopskubedbcom-clickhouse-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-clickhouse-editor appscode/gitopskubedbcom-clickhouse-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-clickhouse-editor appscode/gitopskubedbcom-clickhouse-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-clickhouse-editor appscode/gitopskubedbcom-clickhouse-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-db2-editor/Chart.yaml b/charts/gitopskubedbcom-db2-editor/Chart.yaml index 535087164d..35f6ec3523 100644 --- a/charts/gitopskubedbcom-db2-editor/Chart.yaml +++ b/charts/gitopskubedbcom-db2-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"db2s"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DB2 Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-db2-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-db2-editor/README.md b/charts/gitopskubedbcom-db2-editor/README.md index f135fdfda7..093846e258 100644 --- a/charts/gitopskubedbcom-db2-editor/README.md +++ b/charts/gitopskubedbcom-db2-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-db2-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-db2-editor appscode/gitopskubedbcom-db2-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-db2-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-db2-editor appscode/gitopskubedbcom-db2-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DB2 Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `gitopskubedbcom-db2-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-db2-editor appscode/gitopskubedbcom-db2-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-db2-editor appscode/gitopskubedbcom-db2-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DB2 Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-db Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-db2-editor appscode/gitopskubedbcom-db2-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-db2-editor appscode/gitopskubedbcom-db2-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-db2-editor appscode/gitopskubedbcom-db2-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-db2-editor appscode/gitopskubedbcom-db2-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-documentdb-editor/Chart.yaml b/charts/gitopskubedbcom-documentdb-editor/Chart.yaml index 854998df1d..7ce8edee4c 100644 --- a/charts/gitopskubedbcom-documentdb-editor/Chart.yaml +++ b/charts/gitopskubedbcom-documentdb-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"documentdbs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DocumentDB Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-documentdb-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-documentdb-editor/README.md b/charts/gitopskubedbcom-documentdb-editor/README.md index c21ee9b30f..bd63ac0807 100644 --- a/charts/gitopskubedbcom-documentdb-editor/README.md +++ b/charts/gitopskubedbcom-documentdb-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-documentdb-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-documentdb-editor appscode/gitopskubedbcom-documentdb-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-documentdb-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-documentdb-editor appscode/gitopskubedbcom-documentdb-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DocumentDB Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `gitopskubedbcom-documentdb-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-documentdb-editor appscode/gitopskubedbcom-documentdb-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-documentdb-editor appscode/gitopskubedbcom-documentdb-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DocumentDB Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-do Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-documentdb-editor appscode/gitopskubedbcom-documentdb-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-documentdb-editor appscode/gitopskubedbcom-documentdb-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-documentdb-editor appscode/gitopskubedbcom-documentdb-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-documentdb-editor appscode/gitopskubedbcom-documentdb-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-druid-editor/Chart.yaml b/charts/gitopskubedbcom-druid-editor/Chart.yaml index 662da807f1..f79cf095df 100644 --- a/charts/gitopskubedbcom-druid-editor/Chart.yaml +++ b/charts/gitopskubedbcom-druid-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"druids"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Druid Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-druid-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-druid-editor/README.md b/charts/gitopskubedbcom-druid-editor/README.md index 15b2a5b989..7ee81d7b75 100644 --- a/charts/gitopskubedbcom-druid-editor/README.md +++ b/charts/gitopskubedbcom-druid-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-druid-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-druid-editor appscode/gitopskubedbcom-druid-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-druid-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-druid-editor appscode/gitopskubedbcom-druid-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Druid Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `gitopskubedbcom-druid-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-druid-editor appscode/gitopskubedbcom-druid-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-druid-editor appscode/gitopskubedbcom-druid-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Druid Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-dr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-druid-editor appscode/gitopskubedbcom-druid-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-druid-editor appscode/gitopskubedbcom-druid-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-druid-editor appscode/gitopskubedbcom-druid-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-druid-editor appscode/gitopskubedbcom-druid-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-elasticsearch-editor/Chart.yaml b/charts/gitopskubedbcom-elasticsearch-editor/Chart.yaml index 891fbab2cf..ca619546d7 100644 --- a/charts/gitopskubedbcom-elasticsearch-editor/Chart.yaml +++ b/charts/gitopskubedbcom-elasticsearch-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"elasticsearches"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Elasticsearch Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-elasticsearch-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-elasticsearch-editor/README.md b/charts/gitopskubedbcom-elasticsearch-editor/README.md index 47d39632af..ac10b3ecb6 100644 --- a/charts/gitopskubedbcom-elasticsearch-editor/README.md +++ b/charts/gitopskubedbcom-elasticsearch-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-elasticsearch-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-elasticsearch-editor appscode/gitopskubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-elasticsearch-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-elasticsearch-editor appscode/gitopskubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Elasticsearch Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `gitopskubedbcom-elasticsearch-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-elasticsearch-editor appscode/gitopskubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-elasticsearch-editor appscode/gitopskubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Elasticsearch Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-el Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-elasticsearch-editor appscode/gitopskubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-elasticsearch-editor appscode/gitopskubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-elasticsearch-editor appscode/gitopskubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-elasticsearch-editor appscode/gitopskubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-hanadb-editor/Chart.yaml b/charts/gitopskubedbcom-hanadb-editor/Chart.yaml index 6f429aea6f..3ccd450e5a 100644 --- a/charts/gitopskubedbcom-hanadb-editor/Chart.yaml +++ b/charts/gitopskubedbcom-hanadb-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"hanadbs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: HanaDB Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-hanadb-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-hanadb-editor/README.md b/charts/gitopskubedbcom-hanadb-editor/README.md index c93b1983d6..97fe86703e 100644 --- a/charts/gitopskubedbcom-hanadb-editor/README.md +++ b/charts/gitopskubedbcom-hanadb-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-hanadb-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-hanadb-editor appscode/gitopskubedbcom-hanadb-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-hanadb-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-hanadb-editor appscode/gitopskubedbcom-hanadb-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HanaDB Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `gitopskubedbcom-hanadb-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-hanadb-editor appscode/gitopskubedbcom-hanadb-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-hanadb-editor appscode/gitopskubedbcom-hanadb-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a HanaDB Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-ha Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-hanadb-editor appscode/gitopskubedbcom-hanadb-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-hanadb-editor appscode/gitopskubedbcom-hanadb-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-hanadb-editor appscode/gitopskubedbcom-hanadb-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-hanadb-editor appscode/gitopskubedbcom-hanadb-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-hazelcast-editor/Chart.yaml b/charts/gitopskubedbcom-hazelcast-editor/Chart.yaml index 521fcc77a9..dc8275eda7 100644 --- a/charts/gitopskubedbcom-hazelcast-editor/Chart.yaml +++ b/charts/gitopskubedbcom-hazelcast-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"hazelcasts"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Hazelcast Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-hazelcast-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-hazelcast-editor/README.md b/charts/gitopskubedbcom-hazelcast-editor/README.md index f7779d34cf..dd18b6e9c2 100644 --- a/charts/gitopskubedbcom-hazelcast-editor/README.md +++ b/charts/gitopskubedbcom-hazelcast-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-hazelcast-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-hazelcast-editor appscode/gitopskubedbcom-hazelcast-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-hazelcast-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-hazelcast-editor appscode/gitopskubedbcom-hazelcast-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Hazelcast Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `gitopskubedbcom-hazelcast-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-hazelcast-editor appscode/gitopskubedbcom-hazelcast-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-hazelcast-editor appscode/gitopskubedbcom-hazelcast-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Hazelcast Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-ha Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-hazelcast-editor appscode/gitopskubedbcom-hazelcast-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-hazelcast-editor appscode/gitopskubedbcom-hazelcast-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-hazelcast-editor appscode/gitopskubedbcom-hazelcast-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-hazelcast-editor appscode/gitopskubedbcom-hazelcast-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-ignite-editor/Chart.yaml b/charts/gitopskubedbcom-ignite-editor/Chart.yaml index f66167d610..6db732568b 100644 --- a/charts/gitopskubedbcom-ignite-editor/Chart.yaml +++ b/charts/gitopskubedbcom-ignite-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"ignites"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Ignite Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-ignite-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-ignite-editor/README.md b/charts/gitopskubedbcom-ignite-editor/README.md index dc7179497a..b2a951f1e9 100644 --- a/charts/gitopskubedbcom-ignite-editor/README.md +++ b/charts/gitopskubedbcom-ignite-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-ignite-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-ignite-editor appscode/gitopskubedbcom-ignite-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-ignite-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-ignite-editor appscode/gitopskubedbcom-ignite-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Ignite Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `gitopskubedbcom-ignite-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-ignite-editor appscode/gitopskubedbcom-ignite-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-ignite-editor appscode/gitopskubedbcom-ignite-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Ignite Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-ig Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-ignite-editor appscode/gitopskubedbcom-ignite-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-ignite-editor appscode/gitopskubedbcom-ignite-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-ignite-editor appscode/gitopskubedbcom-ignite-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-ignite-editor appscode/gitopskubedbcom-ignite-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-kafka-editor/Chart.yaml b/charts/gitopskubedbcom-kafka-editor/Chart.yaml index ea0634e701..1d35c66604 100644 --- a/charts/gitopskubedbcom-kafka-editor/Chart.yaml +++ b/charts/gitopskubedbcom-kafka-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"kafkas"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Kafka Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-kafka-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-kafka-editor/README.md b/charts/gitopskubedbcom-kafka-editor/README.md index 293b48fa53..c427b9cb0f 100644 --- a/charts/gitopskubedbcom-kafka-editor/README.md +++ b/charts/gitopskubedbcom-kafka-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-kafka-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-kafka-editor appscode/gitopskubedbcom-kafka-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-kafka-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-kafka-editor appscode/gitopskubedbcom-kafka-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Kafka Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `gitopskubedbcom-kafka-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-kafka-editor appscode/gitopskubedbcom-kafka-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-kafka-editor appscode/gitopskubedbcom-kafka-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Kafka Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-ka Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-kafka-editor appscode/gitopskubedbcom-kafka-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-kafka-editor appscode/gitopskubedbcom-kafka-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-kafka-editor appscode/gitopskubedbcom-kafka-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-kafka-editor appscode/gitopskubedbcom-kafka-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-mariadb-editor/Chart.yaml b/charts/gitopskubedbcom-mariadb-editor/Chart.yaml index 4f63aeb23b..5f78c07e5d 100644 --- a/charts/gitopskubedbcom-mariadb-editor/Chart.yaml +++ b/charts/gitopskubedbcom-mariadb-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"mariadbs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MariaDB Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-mariadb-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-mariadb-editor/README.md b/charts/gitopskubedbcom-mariadb-editor/README.md index 2f1d0963c6..221394c8ad 100644 --- a/charts/gitopskubedbcom-mariadb-editor/README.md +++ b/charts/gitopskubedbcom-mariadb-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-mariadb-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-mariadb-editor appscode/gitopskubedbcom-mariadb-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-mariadb-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-mariadb-editor appscode/gitopskubedbcom-mariadb-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDB Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `gitopskubedbcom-mariadb-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-mariadb-editor appscode/gitopskubedbcom-mariadb-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-mariadb-editor appscode/gitopskubedbcom-mariadb-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MariaDB Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-ma Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-mariadb-editor appscode/gitopskubedbcom-mariadb-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-mariadb-editor appscode/gitopskubedbcom-mariadb-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-mariadb-editor appscode/gitopskubedbcom-mariadb-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-mariadb-editor appscode/gitopskubedbcom-mariadb-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-memcached-editor/Chart.yaml b/charts/gitopskubedbcom-memcached-editor/Chart.yaml index 8a6c778e8f..7e0d0c8431 100644 --- a/charts/gitopskubedbcom-memcached-editor/Chart.yaml +++ b/charts/gitopskubedbcom-memcached-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"memcacheds"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Memcached Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-memcached-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-memcached-editor/README.md b/charts/gitopskubedbcom-memcached-editor/README.md index 22b31f5400..73913d64ca 100644 --- a/charts/gitopskubedbcom-memcached-editor/README.md +++ b/charts/gitopskubedbcom-memcached-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-memcached-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-memcached-editor appscode/gitopskubedbcom-memcached-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-memcached-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-memcached-editor appscode/gitopskubedbcom-memcached-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Memcached Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `gitopskubedbcom-memcached-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-memcached-editor appscode/gitopskubedbcom-memcached-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-memcached-editor appscode/gitopskubedbcom-memcached-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Memcached Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-me Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-memcached-editor appscode/gitopskubedbcom-memcached-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-memcached-editor appscode/gitopskubedbcom-memcached-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-memcached-editor appscode/gitopskubedbcom-memcached-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-memcached-editor appscode/gitopskubedbcom-memcached-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-milvus-editor/Chart.yaml b/charts/gitopskubedbcom-milvus-editor/Chart.yaml index b7ae21fbcf..07deea7eeb 100644 --- a/charts/gitopskubedbcom-milvus-editor/Chart.yaml +++ b/charts/gitopskubedbcom-milvus-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"milvuses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Milvus Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-milvus-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-milvus-editor/README.md b/charts/gitopskubedbcom-milvus-editor/README.md index 6e2f78b30f..352f7f30ec 100644 --- a/charts/gitopskubedbcom-milvus-editor/README.md +++ b/charts/gitopskubedbcom-milvus-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-milvus-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-milvus-editor appscode/gitopskubedbcom-milvus-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-milvus-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-milvus-editor appscode/gitopskubedbcom-milvus-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Milvus Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `gitopskubedbcom-milvus-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-milvus-editor appscode/gitopskubedbcom-milvus-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-milvus-editor appscode/gitopskubedbcom-milvus-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Milvus Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-mi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-milvus-editor appscode/gitopskubedbcom-milvus-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-milvus-editor appscode/gitopskubedbcom-milvus-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-milvus-editor appscode/gitopskubedbcom-milvus-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-milvus-editor appscode/gitopskubedbcom-milvus-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-mongodb-editor/Chart.yaml b/charts/gitopskubedbcom-mongodb-editor/Chart.yaml index a6ecf62ea3..574dbb3081 100644 --- a/charts/gitopskubedbcom-mongodb-editor/Chart.yaml +++ b/charts/gitopskubedbcom-mongodb-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"mongodbs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MongoDB Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-mongodb-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-mongodb-editor/README.md b/charts/gitopskubedbcom-mongodb-editor/README.md index db16712771..a040a0f3c3 100644 --- a/charts/gitopskubedbcom-mongodb-editor/README.md +++ b/charts/gitopskubedbcom-mongodb-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-mongodb-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-mongodb-editor appscode/gitopskubedbcom-mongodb-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-mongodb-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-mongodb-editor appscode/gitopskubedbcom-mongodb-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDB Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `gitopskubedbcom-mongodb-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-mongodb-editor appscode/gitopskubedbcom-mongodb-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-mongodb-editor appscode/gitopskubedbcom-mongodb-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MongoDB Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-mo Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-mongodb-editor appscode/gitopskubedbcom-mongodb-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-mongodb-editor appscode/gitopskubedbcom-mongodb-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-mongodb-editor appscode/gitopskubedbcom-mongodb-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-mongodb-editor appscode/gitopskubedbcom-mongodb-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-mssqlserver-editor/Chart.yaml b/charts/gitopskubedbcom-mssqlserver-editor/Chart.yaml index 1602fb0844..819c346552 100644 --- a/charts/gitopskubedbcom-mssqlserver-editor/Chart.yaml +++ b/charts/gitopskubedbcom-mssqlserver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"mssqlservers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLServer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-mssqlserver-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-mssqlserver-editor/README.md b/charts/gitopskubedbcom-mssqlserver-editor/README.md index a20c44776c..5f430b0392 100644 --- a/charts/gitopskubedbcom-mssqlserver-editor/README.md +++ b/charts/gitopskubedbcom-mssqlserver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-mssqlserver-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-mssqlserver-editor appscode/gitopskubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-mssqlserver-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-mssqlserver-editor appscode/gitopskubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServer Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `gitopskubedbcom-mssqlserver-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-mssqlserver-editor appscode/gitopskubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-mssqlserver-editor appscode/gitopskubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLServer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-ms Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-mssqlserver-editor appscode/gitopskubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-mssqlserver-editor appscode/gitopskubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-mssqlserver-editor appscode/gitopskubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-mssqlserver-editor appscode/gitopskubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-mysql-editor/Chart.yaml b/charts/gitopskubedbcom-mysql-editor/Chart.yaml index 43ade9dba1..1c63a37e79 100644 --- a/charts/gitopskubedbcom-mysql-editor/Chart.yaml +++ b/charts/gitopskubedbcom-mysql-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"mysqls"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MySQL Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-mysql-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-mysql-editor/README.md b/charts/gitopskubedbcom-mysql-editor/README.md index d263376fe8..2b3fba62fb 100644 --- a/charts/gitopskubedbcom-mysql-editor/README.md +++ b/charts/gitopskubedbcom-mysql-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-mysql-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-mysql-editor appscode/gitopskubedbcom-mysql-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-mysql-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-mysql-editor appscode/gitopskubedbcom-mysql-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQL Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `gitopskubedbcom-mysql-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-mysql-editor appscode/gitopskubedbcom-mysql-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-mysql-editor appscode/gitopskubedbcom-mysql-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MySQL Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-my Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-mysql-editor appscode/gitopskubedbcom-mysql-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-mysql-editor appscode/gitopskubedbcom-mysql-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-mysql-editor appscode/gitopskubedbcom-mysql-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-mysql-editor appscode/gitopskubedbcom-mysql-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-neo4j-editor/Chart.yaml b/charts/gitopskubedbcom-neo4j-editor/Chart.yaml index 5781a7d1fe..1f8136ce97 100644 --- a/charts/gitopskubedbcom-neo4j-editor/Chart.yaml +++ b/charts/gitopskubedbcom-neo4j-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"neo4js"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Neo4j Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-neo4j-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-neo4j-editor/README.md b/charts/gitopskubedbcom-neo4j-editor/README.md index 10d9d4564d..f81d92b7b3 100644 --- a/charts/gitopskubedbcom-neo4j-editor/README.md +++ b/charts/gitopskubedbcom-neo4j-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-neo4j-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-neo4j-editor appscode/gitopskubedbcom-neo4j-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-neo4j-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-neo4j-editor appscode/gitopskubedbcom-neo4j-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Neo4j Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `gitopskubedbcom-neo4j-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-neo4j-editor appscode/gitopskubedbcom-neo4j-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-neo4j-editor appscode/gitopskubedbcom-neo4j-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Neo4j Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-ne Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-neo4j-editor appscode/gitopskubedbcom-neo4j-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-neo4j-editor appscode/gitopskubedbcom-neo4j-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-neo4j-editor appscode/gitopskubedbcom-neo4j-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-neo4j-editor appscode/gitopskubedbcom-neo4j-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-oracle-editor/Chart.yaml b/charts/gitopskubedbcom-oracle-editor/Chart.yaml index 2befb7eb63..9919634b71 100644 --- a/charts/gitopskubedbcom-oracle-editor/Chart.yaml +++ b/charts/gitopskubedbcom-oracle-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"oracles"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Oracle Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-oracle-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-oracle-editor/README.md b/charts/gitopskubedbcom-oracle-editor/README.md index d9f0e53838..5fc38481a8 100644 --- a/charts/gitopskubedbcom-oracle-editor/README.md +++ b/charts/gitopskubedbcom-oracle-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-oracle-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-oracle-editor appscode/gitopskubedbcom-oracle-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-oracle-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-oracle-editor appscode/gitopskubedbcom-oracle-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Oracle Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `gitopskubedbcom-oracle-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-oracle-editor appscode/gitopskubedbcom-oracle-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-oracle-editor appscode/gitopskubedbcom-oracle-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Oracle Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-or Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-oracle-editor appscode/gitopskubedbcom-oracle-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-oracle-editor appscode/gitopskubedbcom-oracle-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-oracle-editor appscode/gitopskubedbcom-oracle-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-oracle-editor appscode/gitopskubedbcom-oracle-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-perconaxtradb-editor/Chart.yaml b/charts/gitopskubedbcom-perconaxtradb-editor/Chart.yaml index 750849c84f..cd7b7837fc 100644 --- a/charts/gitopskubedbcom-perconaxtradb-editor/Chart.yaml +++ b/charts/gitopskubedbcom-perconaxtradb-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"perconaxtradbs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PerconaXtraDB Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-perconaxtradb-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-perconaxtradb-editor/README.md b/charts/gitopskubedbcom-perconaxtradb-editor/README.md index cb62b7059e..de35e37c19 100644 --- a/charts/gitopskubedbcom-perconaxtradb-editor/README.md +++ b/charts/gitopskubedbcom-perconaxtradb-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-perconaxtradb-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-perconaxtradb-editor appscode/gitopskubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-perconaxtradb-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-perconaxtradb-editor appscode/gitopskubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PerconaXtraDB Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `gitopskubedbcom-perconaxtradb-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-perconaxtradb-editor appscode/gitopskubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-perconaxtradb-editor appscode/gitopskubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PerconaXtraDB Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-pe Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-perconaxtradb-editor appscode/gitopskubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-perconaxtradb-editor appscode/gitopskubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-perconaxtradb-editor appscode/gitopskubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-perconaxtradb-editor appscode/gitopskubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-pgbouncer-editor/Chart.yaml b/charts/gitopskubedbcom-pgbouncer-editor/Chart.yaml index cbdbf80a46..11ac7af8fb 100644 --- a/charts/gitopskubedbcom-pgbouncer-editor/Chart.yaml +++ b/charts/gitopskubedbcom-pgbouncer-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"pgbouncers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PgBouncer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-pgbouncer-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-pgbouncer-editor/README.md b/charts/gitopskubedbcom-pgbouncer-editor/README.md index 7e4ec2aa49..e74ada3799 100644 --- a/charts/gitopskubedbcom-pgbouncer-editor/README.md +++ b/charts/gitopskubedbcom-pgbouncer-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-pgbouncer-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-pgbouncer-editor appscode/gitopskubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-pgbouncer-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-pgbouncer-editor appscode/gitopskubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncer Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `gitopskubedbcom-pgbouncer-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-pgbouncer-editor appscode/gitopskubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-pgbouncer-editor appscode/gitopskubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PgBouncer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-pg Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-pgbouncer-editor appscode/gitopskubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-pgbouncer-editor appscode/gitopskubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-pgbouncer-editor appscode/gitopskubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-pgbouncer-editor appscode/gitopskubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-pgpool-editor/Chart.yaml b/charts/gitopskubedbcom-pgpool-editor/Chart.yaml index 65b35c6105..9aceb6d336 100644 --- a/charts/gitopskubedbcom-pgpool-editor/Chart.yaml +++ b/charts/gitopskubedbcom-pgpool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"pgpools"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Pgpool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-pgpool-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-pgpool-editor/README.md b/charts/gitopskubedbcom-pgpool-editor/README.md index 48a3ac3de6..fdfe44a436 100644 --- a/charts/gitopskubedbcom-pgpool-editor/README.md +++ b/charts/gitopskubedbcom-pgpool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-pgpool-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-pgpool-editor appscode/gitopskubedbcom-pgpool-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-pgpool-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-pgpool-editor appscode/gitopskubedbcom-pgpool-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Pgpool Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `gitopskubedbcom-pgpool-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-pgpool-editor appscode/gitopskubedbcom-pgpool-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-pgpool-editor appscode/gitopskubedbcom-pgpool-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Pgpool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-pg Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-pgpool-editor appscode/gitopskubedbcom-pgpool-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-pgpool-editor appscode/gitopskubedbcom-pgpool-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-pgpool-editor appscode/gitopskubedbcom-pgpool-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-pgpool-editor appscode/gitopskubedbcom-pgpool-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-postgres-editor/Chart.yaml b/charts/gitopskubedbcom-postgres-editor/Chart.yaml index b1a1c29e5c..d92b8b59bc 100644 --- a/charts/gitopskubedbcom-postgres-editor/Chart.yaml +++ b/charts/gitopskubedbcom-postgres-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"postgreses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Postgres Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-postgres-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-postgres-editor/README.md b/charts/gitopskubedbcom-postgres-editor/README.md index 040a178970..ca38731b1c 100644 --- a/charts/gitopskubedbcom-postgres-editor/README.md +++ b/charts/gitopskubedbcom-postgres-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-postgres-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-postgres-editor appscode/gitopskubedbcom-postgres-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-postgres-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-postgres-editor appscode/gitopskubedbcom-postgres-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Postgres Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `gitopskubedbcom-postgres-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-postgres-editor appscode/gitopskubedbcom-postgres-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-postgres-editor appscode/gitopskubedbcom-postgres-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Postgres Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-po Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-postgres-editor appscode/gitopskubedbcom-postgres-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-postgres-editor appscode/gitopskubedbcom-postgres-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-postgres-editor appscode/gitopskubedbcom-postgres-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-postgres-editor appscode/gitopskubedbcom-postgres-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-proxysql-editor/Chart.yaml b/charts/gitopskubedbcom-proxysql-editor/Chart.yaml index cdfdf99744..6eebbcea3c 100644 --- a/charts/gitopskubedbcom-proxysql-editor/Chart.yaml +++ b/charts/gitopskubedbcom-proxysql-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"proxysqls"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProxySQL Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-proxysql-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-proxysql-editor/README.md b/charts/gitopskubedbcom-proxysql-editor/README.md index bdc1262f31..7c177ced09 100644 --- a/charts/gitopskubedbcom-proxysql-editor/README.md +++ b/charts/gitopskubedbcom-proxysql-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-proxysql-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-proxysql-editor appscode/gitopskubedbcom-proxysql-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-proxysql-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-proxysql-editor appscode/gitopskubedbcom-proxysql-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQL Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `gitopskubedbcom-proxysql-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-proxysql-editor appscode/gitopskubedbcom-proxysql-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-proxysql-editor appscode/gitopskubedbcom-proxysql-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProxySQL Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-pr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-proxysql-editor appscode/gitopskubedbcom-proxysql-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-proxysql-editor appscode/gitopskubedbcom-proxysql-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-proxysql-editor appscode/gitopskubedbcom-proxysql-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-proxysql-editor appscode/gitopskubedbcom-proxysql-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-qdrant-editor/Chart.yaml b/charts/gitopskubedbcom-qdrant-editor/Chart.yaml index cb25aa956e..1a1fe3c9b6 100644 --- a/charts/gitopskubedbcom-qdrant-editor/Chart.yaml +++ b/charts/gitopskubedbcom-qdrant-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"qdrants"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Qdrant Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-qdrant-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-qdrant-editor/README.md b/charts/gitopskubedbcom-qdrant-editor/README.md index 77e9f3bdb8..4aeb50395f 100644 --- a/charts/gitopskubedbcom-qdrant-editor/README.md +++ b/charts/gitopskubedbcom-qdrant-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-qdrant-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-qdrant-editor appscode/gitopskubedbcom-qdrant-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-qdrant-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-qdrant-editor appscode/gitopskubedbcom-qdrant-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Qdrant Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `gitopskubedbcom-qdrant-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-qdrant-editor appscode/gitopskubedbcom-qdrant-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-qdrant-editor appscode/gitopskubedbcom-qdrant-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Qdrant Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-qd Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-qdrant-editor appscode/gitopskubedbcom-qdrant-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-qdrant-editor appscode/gitopskubedbcom-qdrant-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-qdrant-editor appscode/gitopskubedbcom-qdrant-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-qdrant-editor appscode/gitopskubedbcom-qdrant-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-rabbitmq-editor/Chart.yaml b/charts/gitopskubedbcom-rabbitmq-editor/Chart.yaml index ad0380f2f3..610ff0460b 100644 --- a/charts/gitopskubedbcom-rabbitmq-editor/Chart.yaml +++ b/charts/gitopskubedbcom-rabbitmq-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"rabbitmqs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RabbitMQ Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-rabbitmq-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-rabbitmq-editor/README.md b/charts/gitopskubedbcom-rabbitmq-editor/README.md index e94849ebdd..eec1688241 100644 --- a/charts/gitopskubedbcom-rabbitmq-editor/README.md +++ b/charts/gitopskubedbcom-rabbitmq-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-rabbitmq-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-rabbitmq-editor appscode/gitopskubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-rabbitmq-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-rabbitmq-editor appscode/gitopskubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RabbitMQ Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `gitopskubedbcom-rabbitmq-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-rabbitmq-editor appscode/gitopskubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-rabbitmq-editor appscode/gitopskubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RabbitMQ Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-ra Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-rabbitmq-editor appscode/gitopskubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-rabbitmq-editor appscode/gitopskubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-rabbitmq-editor appscode/gitopskubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-rabbitmq-editor appscode/gitopskubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-redis-editor/Chart.yaml b/charts/gitopskubedbcom-redis-editor/Chart.yaml index 57985e030f..740863d6ca 100644 --- a/charts/gitopskubedbcom-redis-editor/Chart.yaml +++ b/charts/gitopskubedbcom-redis-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"redises"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Redis Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-redis-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-redis-editor/README.md b/charts/gitopskubedbcom-redis-editor/README.md index c260b397c4..15a9bc29b5 100644 --- a/charts/gitopskubedbcom-redis-editor/README.md +++ b/charts/gitopskubedbcom-redis-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-redis-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-redis-editor appscode/gitopskubedbcom-redis-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-redis-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-redis-editor appscode/gitopskubedbcom-redis-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Redis Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `gitopskubedbcom-redis-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-redis-editor appscode/gitopskubedbcom-redis-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-redis-editor appscode/gitopskubedbcom-redis-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Redis Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-re Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-redis-editor appscode/gitopskubedbcom-redis-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-redis-editor appscode/gitopskubedbcom-redis-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-redis-editor appscode/gitopskubedbcom-redis-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-redis-editor appscode/gitopskubedbcom-redis-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-redissentinel-editor/Chart.yaml b/charts/gitopskubedbcom-redissentinel-editor/Chart.yaml index 9e4988026a..35eda0fa58 100644 --- a/charts/gitopskubedbcom-redissentinel-editor/Chart.yaml +++ b/charts/gitopskubedbcom-redissentinel-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"redissentinels"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RedisSentinel Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-redissentinel-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-redissentinel-editor/README.md b/charts/gitopskubedbcom-redissentinel-editor/README.md index ef225106dd..ce4702f633 100644 --- a/charts/gitopskubedbcom-redissentinel-editor/README.md +++ b/charts/gitopskubedbcom-redissentinel-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-redissentinel-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-redissentinel-editor appscode/gitopskubedbcom-redissentinel-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-redissentinel-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-redissentinel-editor appscode/gitopskubedbcom-redissentinel-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisSentinel Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `gitopskubedbcom-redissentinel-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-redissentinel-editor appscode/gitopskubedbcom-redissentinel-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-redissentinel-editor appscode/gitopskubedbcom-redissentinel-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RedisSentinel Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-re Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-redissentinel-editor appscode/gitopskubedbcom-redissentinel-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-redissentinel-editor appscode/gitopskubedbcom-redissentinel-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-redissentinel-editor appscode/gitopskubedbcom-redissentinel-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-redissentinel-editor appscode/gitopskubedbcom-redissentinel-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-singlestore-editor/Chart.yaml b/charts/gitopskubedbcom-singlestore-editor/Chart.yaml index f082d5e4d5..8a68b73d4c 100644 --- a/charts/gitopskubedbcom-singlestore-editor/Chart.yaml +++ b/charts/gitopskubedbcom-singlestore-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"singlestores"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Singlestore Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-singlestore-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-singlestore-editor/README.md b/charts/gitopskubedbcom-singlestore-editor/README.md index eb3c7c7c8b..91c11d008c 100644 --- a/charts/gitopskubedbcom-singlestore-editor/README.md +++ b/charts/gitopskubedbcom-singlestore-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-singlestore-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-singlestore-editor appscode/gitopskubedbcom-singlestore-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-singlestore-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-singlestore-editor appscode/gitopskubedbcom-singlestore-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Singlestore Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `gitopskubedbcom-singlestore-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-singlestore-editor appscode/gitopskubedbcom-singlestore-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-singlestore-editor appscode/gitopskubedbcom-singlestore-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Singlestore Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-si Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-singlestore-editor appscode/gitopskubedbcom-singlestore-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-singlestore-editor appscode/gitopskubedbcom-singlestore-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-singlestore-editor appscode/gitopskubedbcom-singlestore-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-singlestore-editor appscode/gitopskubedbcom-singlestore-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-solr-editor/Chart.yaml b/charts/gitopskubedbcom-solr-editor/Chart.yaml index e14b21e0ad..df2279aa37 100644 --- a/charts/gitopskubedbcom-solr-editor/Chart.yaml +++ b/charts/gitopskubedbcom-solr-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"solrs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Solr Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-solr-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-solr-editor/README.md b/charts/gitopskubedbcom-solr-editor/README.md index d440bb9c12..d7f783dac3 100644 --- a/charts/gitopskubedbcom-solr-editor/README.md +++ b/charts/gitopskubedbcom-solr-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-solr-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-solr-editor appscode/gitopskubedbcom-solr-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-solr-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-solr-editor appscode/gitopskubedbcom-solr-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Solr Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `gitopskubedbcom-solr-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-solr-editor appscode/gitopskubedbcom-solr-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-solr-editor appscode/gitopskubedbcom-solr-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Solr Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-so Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-solr-editor appscode/gitopskubedbcom-solr-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-solr-editor appscode/gitopskubedbcom-solr-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-solr-editor appscode/gitopskubedbcom-solr-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-solr-editor appscode/gitopskubedbcom-solr-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-weaviate-editor/Chart.yaml b/charts/gitopskubedbcom-weaviate-editor/Chart.yaml index da0d87feec..ffcc36a53c 100644 --- a/charts/gitopskubedbcom-weaviate-editor/Chart.yaml +++ b/charts/gitopskubedbcom-weaviate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"weaviates"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Weaviate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-weaviate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-weaviate-editor/README.md b/charts/gitopskubedbcom-weaviate-editor/README.md index 27665bc4f0..7e463adfdd 100644 --- a/charts/gitopskubedbcom-weaviate-editor/README.md +++ b/charts/gitopskubedbcom-weaviate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-weaviate-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-weaviate-editor appscode/gitopskubedbcom-weaviate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-weaviate-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-weaviate-editor appscode/gitopskubedbcom-weaviate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Weaviate Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `gitopskubedbcom-weaviate-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-weaviate-editor appscode/gitopskubedbcom-weaviate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-weaviate-editor appscode/gitopskubedbcom-weaviate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Weaviate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-we Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-weaviate-editor appscode/gitopskubedbcom-weaviate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-weaviate-editor appscode/gitopskubedbcom-weaviate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-weaviate-editor appscode/gitopskubedbcom-weaviate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-weaviate-editor appscode/gitopskubedbcom-weaviate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-zookeeper-editor/Chart.yaml b/charts/gitopskubedbcom-zookeeper-editor/Chart.yaml index 2d3d537ef2..f1dc1ad620 100644 --- a/charts/gitopskubedbcom-zookeeper-editor/Chart.yaml +++ b/charts/gitopskubedbcom-zookeeper-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"zookeepers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ZooKeeper Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-zookeeper-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/gitopskubedbcom-zookeeper-editor/README.md b/charts/gitopskubedbcom-zookeeper-editor/README.md index 09695d8b82..b2d4e21860 100644 --- a/charts/gitopskubedbcom-zookeeper-editor/README.md +++ b/charts/gitopskubedbcom-zookeeper-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-zookeeper-editor --version=v0.38.0 -$ helm upgrade -i gitopskubedbcom-zookeeper-editor appscode/gitopskubedbcom-zookeeper-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/gitopskubedbcom-zookeeper-editor --version=v0.39.0 +$ helm upgrade -i gitopskubedbcom-zookeeper-editor appscode/gitopskubedbcom-zookeeper-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ZooKeeper Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `gitopskubedbcom-zookeeper-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-zookeeper-editor appscode/gitopskubedbcom-zookeeper-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i gitopskubedbcom-zookeeper-editor appscode/gitopskubedbcom-zookeeper-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ZooKeeper Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-zo Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-zookeeper-editor appscode/gitopskubedbcom-zookeeper-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-zookeeper-editor appscode/gitopskubedbcom-zookeeper-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-zookeeper-editor appscode/gitopskubedbcom-zookeeper-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-zookeeper-editor appscode/gitopskubedbcom-zookeeper-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/grafanasearchlightdev-dashboard-editor/Chart.yaml b/charts/grafanasearchlightdev-dashboard-editor/Chart.yaml index 214f19f6ba..621770ef26 100644 --- a/charts/grafanasearchlightdev-dashboard-editor/Chart.yaml +++ b/charts/grafanasearchlightdev-dashboard-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"grafana.searchlight.dev","version":"v1alpha1","resource":"dashboards"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Dashboard Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: grafanasearchlightdev-dashboard-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/grafanasearchlightdev-dashboard-editor/README.md b/charts/grafanasearchlightdev-dashboard-editor/README.md index 9d6f244a2b..56e9472921 100644 --- a/charts/grafanasearchlightdev-dashboard-editor/README.md +++ b/charts/grafanasearchlightdev-dashboard-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/grafanasearchlightdev-dashboard-editor --version=v0.38.0 -$ helm upgrade -i grafanasearchlightdev-dashboard-editor appscode/grafanasearchlightdev-dashboard-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/grafanasearchlightdev-dashboard-editor --version=v0.39.0 +$ helm upgrade -i grafanasearchlightdev-dashboard-editor appscode/grafanasearchlightdev-dashboard-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Dashboard Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `grafanasearchlightdev-dashboard-editor`: ```bash -$ helm upgrade -i grafanasearchlightdev-dashboard-editor appscode/grafanasearchlightdev-dashboard-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i grafanasearchlightdev-dashboard-editor appscode/grafanasearchlightdev-dashboard-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Dashboard Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `grafanasearchlight Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i grafanasearchlightdev-dashboard-editor appscode/grafanasearchlightdev-dashboard-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=grafana.searchlight.dev/v1alpha1 +$ helm upgrade -i grafanasearchlightdev-dashboard-editor appscode/grafanasearchlightdev-dashboard-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=grafana.searchlight.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i grafanasearchlightdev-dashboard-editor appscode/grafanasearchlightdev-dashboard-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i grafanasearchlightdev-dashboard-editor appscode/grafanasearchlightdev-dashboard-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/grafanasearchlightdev-dashboardtemplate-editor/Chart.yaml b/charts/grafanasearchlightdev-dashboardtemplate-editor/Chart.yaml index 46ddaa2b03..9e0515c81b 100644 --- a/charts/grafanasearchlightdev-dashboardtemplate-editor/Chart.yaml +++ b/charts/grafanasearchlightdev-dashboardtemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"grafana.searchlight.dev","version":"v1alpha1","resource":"dashboardtemplates"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DashboardTemplate Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: grafanasearchlightdev-dashboardtemplate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/grafanasearchlightdev-dashboardtemplate-editor/README.md b/charts/grafanasearchlightdev-dashboardtemplate-editor/README.md index 8fe5fa8416..3fe2ce0142 100644 --- a/charts/grafanasearchlightdev-dashboardtemplate-editor/README.md +++ b/charts/grafanasearchlightdev-dashboardtemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/grafanasearchlightdev-dashboardtemplate-editor --version=v0.38.0 -$ helm upgrade -i grafanasearchlightdev-dashboardtemplate-editor appscode/grafanasearchlightdev-dashboardtemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/grafanasearchlightdev-dashboardtemplate-editor --version=v0.39.0 +$ helm upgrade -i grafanasearchlightdev-dashboardtemplate-editor appscode/grafanasearchlightdev-dashboardtemplate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DashboardTemplate Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `grafanasearchlightdev-dashboardtemplate-editor`: ```bash -$ helm upgrade -i grafanasearchlightdev-dashboardtemplate-editor appscode/grafanasearchlightdev-dashboardtemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i grafanasearchlightdev-dashboardtemplate-editor appscode/grafanasearchlightdev-dashboardtemplate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DashboardTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -55,12 +55,12 @@ The following table lists the configurable parameters of the `grafanasearchlight Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i grafanasearchlightdev-dashboardtemplate-editor appscode/grafanasearchlightdev-dashboardtemplate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=grafana.searchlight.dev/v1alpha1 +$ helm upgrade -i grafanasearchlightdev-dashboardtemplate-editor appscode/grafanasearchlightdev-dashboardtemplate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=grafana.searchlight.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i grafanasearchlightdev-dashboardtemplate-editor appscode/grafanasearchlightdev-dashboardtemplate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i grafanasearchlightdev-dashboardtemplate-editor appscode/grafanasearchlightdev-dashboardtemplate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/grafanasearchlightdev-datasource-editor/Chart.yaml b/charts/grafanasearchlightdev-datasource-editor/Chart.yaml index 6f1eb1740f..df2d2bf990 100644 --- a/charts/grafanasearchlightdev-datasource-editor/Chart.yaml +++ b/charts/grafanasearchlightdev-datasource-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"grafana.searchlight.dev","version":"v1alpha1","resource":"datasources"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Datasource Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: grafanasearchlightdev-datasource-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/grafanasearchlightdev-datasource-editor/README.md b/charts/grafanasearchlightdev-datasource-editor/README.md index ee7d592373..e07e706f62 100644 --- a/charts/grafanasearchlightdev-datasource-editor/README.md +++ b/charts/grafanasearchlightdev-datasource-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/grafanasearchlightdev-datasource-editor --version=v0.38.0 -$ helm upgrade -i grafanasearchlightdev-datasource-editor appscode/grafanasearchlightdev-datasource-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/grafanasearchlightdev-datasource-editor --version=v0.39.0 +$ helm upgrade -i grafanasearchlightdev-datasource-editor appscode/grafanasearchlightdev-datasource-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Datasource Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `grafanasearchlightdev-datasource-editor`: ```bash -$ helm upgrade -i grafanasearchlightdev-datasource-editor appscode/grafanasearchlightdev-datasource-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i grafanasearchlightdev-datasource-editor appscode/grafanasearchlightdev-datasource-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Datasource Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `grafanasearchlight Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i grafanasearchlightdev-datasource-editor appscode/grafanasearchlightdev-datasource-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=grafana.searchlight.dev/v1alpha1 +$ helm upgrade -i grafanasearchlightdev-datasource-editor appscode/grafanasearchlightdev-datasource-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=grafana.searchlight.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i grafanasearchlightdev-datasource-editor appscode/grafanasearchlightdev-datasource-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i grafanasearchlightdev-datasource-editor appscode/grafanasearchlightdev-datasource-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/helmtoolkitfluxcdio-helmrelease-editor/Chart.yaml b/charts/helmtoolkitfluxcdio-helmrelease-editor/Chart.yaml index 3c0760addf..96f2265fd3 100644 --- a/charts/helmtoolkitfluxcdio-helmrelease-editor/Chart.yaml +++ b/charts/helmtoolkitfluxcdio-helmrelease-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"helm.toolkit.fluxcd.io","version":"v2","resource":"helmreleases"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: HelmRelease Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: helmtoolkitfluxcdio-helmrelease-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/helmtoolkitfluxcdio-helmrelease-editor/README.md b/charts/helmtoolkitfluxcdio-helmrelease-editor/README.md index 95a17d3b66..6577d3596d 100644 --- a/charts/helmtoolkitfluxcdio-helmrelease-editor/README.md +++ b/charts/helmtoolkitfluxcdio-helmrelease-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/helmtoolkitfluxcdio-helmrelease-editor --version=v0.38.0 -$ helm upgrade -i helmtoolkitfluxcdio-helmrelease-editor appscode/helmtoolkitfluxcdio-helmrelease-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/helmtoolkitfluxcdio-helmrelease-editor --version=v0.39.0 +$ helm upgrade -i helmtoolkitfluxcdio-helmrelease-editor appscode/helmtoolkitfluxcdio-helmrelease-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HelmRelease Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `helmtoolkitfluxcdio-helmrelease-editor`: ```bash -$ helm upgrade -i helmtoolkitfluxcdio-helmrelease-editor appscode/helmtoolkitfluxcdio-helmrelease-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i helmtoolkitfluxcdio-helmrelease-editor appscode/helmtoolkitfluxcdio-helmrelease-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a HelmRelease Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `helmtoolkitfluxcdi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i helmtoolkitfluxcdio-helmrelease-editor appscode/helmtoolkitfluxcdio-helmrelease-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=helm.toolkit.fluxcd.io/v2 +$ helm upgrade -i helmtoolkitfluxcdio-helmrelease-editor appscode/helmtoolkitfluxcdio-helmrelease-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=helm.toolkit.fluxcd.io/v2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i helmtoolkitfluxcdio-helmrelease-editor appscode/helmtoolkitfluxcdio-helmrelease-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i helmtoolkitfluxcdio-helmrelease-editor appscode/helmtoolkitfluxcdio-helmrelease-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/iamawskubedbcom-role-editor/Chart.yaml b/charts/iamawskubedbcom-role-editor/Chart.yaml index c32a10a3f6..3dcf160875 100644 --- a/charts/iamawskubedbcom-role-editor/Chart.yaml +++ b/charts/iamawskubedbcom-role-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"iam.aws.kubedb.com","version":"v1alpha1","resource":"roles"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Role Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: iamawskubedbcom-role-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/iamawskubedbcom-role-editor/README.md b/charts/iamawskubedbcom-role-editor/README.md index b04e9b8a8b..c73aa0c525 100644 --- a/charts/iamawskubedbcom-role-editor/README.md +++ b/charts/iamawskubedbcom-role-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/iamawskubedbcom-role-editor --version=v0.38.0 -$ helm upgrade -i iamawskubedbcom-role-editor appscode/iamawskubedbcom-role-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/iamawskubedbcom-role-editor --version=v0.39.0 +$ helm upgrade -i iamawskubedbcom-role-editor appscode/iamawskubedbcom-role-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Role Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `iamawskubedbcom-role-editor`: ```bash -$ helm upgrade -i iamawskubedbcom-role-editor appscode/iamawskubedbcom-role-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i iamawskubedbcom-role-editor appscode/iamawskubedbcom-role-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Role Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `iamawskubedbcom-ro Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i iamawskubedbcom-role-editor appscode/iamawskubedbcom-role-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=iam.aws.kubedb.com/v1alpha1 +$ helm upgrade -i iamawskubedbcom-role-editor appscode/iamawskubedbcom-role-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=iam.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i iamawskubedbcom-role-editor appscode/iamawskubedbcom-role-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i iamawskubedbcom-role-editor appscode/iamawskubedbcom-role-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/identityk8sappscodecom-clusteridentity-editor/Chart.yaml b/charts/identityk8sappscodecom-clusteridentity-editor/Chart.yaml index 7202dfe1d8..014591ff61 100644 --- a/charts/identityk8sappscodecom-clusteridentity-editor/Chart.yaml +++ b/charts/identityk8sappscodecom-clusteridentity-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"identity.k8s.appscode.com","version":"v1alpha1","resource":"clusteridentitys"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterIdentity Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: identityk8sappscodecom-clusteridentity-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/identityk8sappscodecom-clusteridentity-editor/README.md b/charts/identityk8sappscodecom-clusteridentity-editor/README.md index 13ee5cb63f..0e38c872f6 100644 --- a/charts/identityk8sappscodecom-clusteridentity-editor/README.md +++ b/charts/identityk8sappscodecom-clusteridentity-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/identityk8sappscodecom-clusteridentity-editor --version=v0.38.0 -$ helm upgrade -i identityk8sappscodecom-clusteridentity-editor appscode/identityk8sappscodecom-clusteridentity-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/identityk8sappscodecom-clusteridentity-editor --version=v0.39.0 +$ helm upgrade -i identityk8sappscodecom-clusteridentity-editor appscode/identityk8sappscodecom-clusteridentity-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterIdentity Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `identityk8sappscodecom-clusteridentity-editor`: ```bash -$ helm upgrade -i identityk8sappscodecom-clusteridentity-editor appscode/identityk8sappscodecom-clusteridentity-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i identityk8sappscodecom-clusteridentity-editor appscode/identityk8sappscodecom-clusteridentity-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterIdentity Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `identityk8sappscod Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i identityk8sappscodecom-clusteridentity-editor appscode/identityk8sappscodecom-clusteridentity-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=identity.k8s.appscode.com/v1alpha1 +$ helm upgrade -i identityk8sappscodecom-clusteridentity-editor appscode/identityk8sappscodecom-clusteridentity-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=identity.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i identityk8sappscodecom-clusteridentity-editor appscode/identityk8sappscodecom-clusteridentity-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i identityk8sappscodecom-clusteridentity-editor appscode/identityk8sappscodecom-clusteridentity-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor/Chart.yaml b/charts/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor/Chart.yaml index 03a993509d..a85561cc84 100644 --- a/charts/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor/Chart.yaml +++ b/charts/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"identity.k8s.appscode.com","version":"v1alpha1","resource":"selfsubjectnamespaceaccessreviews"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SelfSubjectNamespaceAccessReview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor/README.md b/charts/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor/README.md index 31e46f3b9b..93b9398f34 100644 --- a/charts/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor/README.md +++ b/charts/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor --version=v0.38.0 -$ helm upgrade -i identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor appscode/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor --version=v0.39.0 +$ helm upgrade -i identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor appscode/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SelfSubjectNamespaceAccessReview Editor on a [Kubernetes](h To install/upgrade the chart with the release name `identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor`: ```bash -$ helm upgrade -i identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor appscode/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor appscode/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SelfSubjectNamespaceAccessReview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `identityk8sappscod Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor appscode/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=identity.k8s.appscode.com/v1alpha1 +$ helm upgrade -i identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor appscode/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=identity.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor appscode/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor appscode/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/identityk8sappscodecom-siteinfo-editor/Chart.yaml b/charts/identityk8sappscodecom-siteinfo-editor/Chart.yaml index 6f2c4b3873..7054ebfd15 100644 --- a/charts/identityk8sappscodecom-siteinfo-editor/Chart.yaml +++ b/charts/identityk8sappscodecom-siteinfo-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"identity.k8s.appscode.com","version":"v1alpha1","resource":"siteinfos"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SiteInfo Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: identityk8sappscodecom-siteinfo-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/identityk8sappscodecom-siteinfo-editor/README.md b/charts/identityk8sappscodecom-siteinfo-editor/README.md index a83cdea74c..bbd2fa5790 100644 --- a/charts/identityk8sappscodecom-siteinfo-editor/README.md +++ b/charts/identityk8sappscodecom-siteinfo-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/identityk8sappscodecom-siteinfo-editor --version=v0.38.0 -$ helm upgrade -i identityk8sappscodecom-siteinfo-editor appscode/identityk8sappscodecom-siteinfo-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/identityk8sappscodecom-siteinfo-editor --version=v0.39.0 +$ helm upgrade -i identityk8sappscodecom-siteinfo-editor appscode/identityk8sappscodecom-siteinfo-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SiteInfo Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `identityk8sappscodecom-siteinfo-editor`: ```bash -$ helm upgrade -i identityk8sappscodecom-siteinfo-editor appscode/identityk8sappscodecom-siteinfo-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i identityk8sappscodecom-siteinfo-editor appscode/identityk8sappscodecom-siteinfo-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SiteInfo Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `identityk8sappscod Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i identityk8sappscodecom-siteinfo-editor appscode/identityk8sappscodecom-siteinfo-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=identity.k8s.appscode.com/v1alpha1 +$ helm upgrade -i identityk8sappscodecom-siteinfo-editor appscode/identityk8sappscodecom-siteinfo-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=identity.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i identityk8sappscodecom-siteinfo-editor appscode/identityk8sappscodecom-siteinfo-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i identityk8sappscodecom-siteinfo-editor appscode/identityk8sappscodecom-siteinfo-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/imagepolicyk8sio-imagereview-editor/Chart.yaml b/charts/imagepolicyk8sio-imagereview-editor/Chart.yaml index 08075c9645..8a940369c3 100644 --- a/charts/imagepolicyk8sio-imagereview-editor/Chart.yaml +++ b/charts/imagepolicyk8sio-imagereview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"imagepolicy.k8s.io","version":"v1alpha1","resource":"imagereviews"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ImageReview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: imagepolicyk8sio-imagereview-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/imagepolicyk8sio-imagereview-editor/README.md b/charts/imagepolicyk8sio-imagereview-editor/README.md index 59b078e2db..a322c9d1df 100644 --- a/charts/imagepolicyk8sio-imagereview-editor/README.md +++ b/charts/imagepolicyk8sio-imagereview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/imagepolicyk8sio-imagereview-editor --version=v0.38.0 -$ helm upgrade -i imagepolicyk8sio-imagereview-editor appscode/imagepolicyk8sio-imagereview-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/imagepolicyk8sio-imagereview-editor --version=v0.39.0 +$ helm upgrade -i imagepolicyk8sio-imagereview-editor appscode/imagepolicyk8sio-imagereview-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ImageReview Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `imagepolicyk8sio-imagereview-editor`: ```bash -$ helm upgrade -i imagepolicyk8sio-imagereview-editor appscode/imagepolicyk8sio-imagereview-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i imagepolicyk8sio-imagereview-editor appscode/imagepolicyk8sio-imagereview-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ImageReview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `imagepolicyk8sio-i Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i imagepolicyk8sio-imagereview-editor appscode/imagepolicyk8sio-imagereview-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=imagepolicy.k8s.io/v1alpha1 +$ helm upgrade -i imagepolicyk8sio-imagereview-editor appscode/imagepolicyk8sio-imagereview-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=imagepolicy.k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i imagepolicyk8sio-imagereview-editor appscode/imagepolicyk8sio-imagereview-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i imagepolicyk8sio-imagereview-editor appscode/imagepolicyk8sio-imagereview-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/imagetoolkitfluxcdio-imagepolicy-editor/Chart.yaml b/charts/imagetoolkitfluxcdio-imagepolicy-editor/Chart.yaml index dd48fc4aaa..41b75e2d0d 100644 --- a/charts/imagetoolkitfluxcdio-imagepolicy-editor/Chart.yaml +++ b/charts/imagetoolkitfluxcdio-imagepolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"image.toolkit.fluxcd.io","version":"v1beta2","resource":"imagepolicies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ImagePolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: imagetoolkitfluxcdio-imagepolicy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/imagetoolkitfluxcdio-imagepolicy-editor/README.md b/charts/imagetoolkitfluxcdio-imagepolicy-editor/README.md index 5b39feff4f..c3c16dc0a1 100644 --- a/charts/imagetoolkitfluxcdio-imagepolicy-editor/README.md +++ b/charts/imagetoolkitfluxcdio-imagepolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/imagetoolkitfluxcdio-imagepolicy-editor --version=v0.38.0 -$ helm upgrade -i imagetoolkitfluxcdio-imagepolicy-editor appscode/imagetoolkitfluxcdio-imagepolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/imagetoolkitfluxcdio-imagepolicy-editor --version=v0.39.0 +$ helm upgrade -i imagetoolkitfluxcdio-imagepolicy-editor appscode/imagetoolkitfluxcdio-imagepolicy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ImagePolicy Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `imagetoolkitfluxcdio-imagepolicy-editor`: ```bash -$ helm upgrade -i imagetoolkitfluxcdio-imagepolicy-editor appscode/imagetoolkitfluxcdio-imagepolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i imagetoolkitfluxcdio-imagepolicy-editor appscode/imagetoolkitfluxcdio-imagepolicy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ImagePolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `imagetoolkitfluxcd Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i imagetoolkitfluxcdio-imagepolicy-editor appscode/imagetoolkitfluxcdio-imagepolicy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=image.toolkit.fluxcd.io/v1beta2 +$ helm upgrade -i imagetoolkitfluxcdio-imagepolicy-editor appscode/imagetoolkitfluxcdio-imagepolicy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=image.toolkit.fluxcd.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i imagetoolkitfluxcdio-imagepolicy-editor appscode/imagetoolkitfluxcdio-imagepolicy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i imagetoolkitfluxcdio-imagepolicy-editor appscode/imagetoolkitfluxcdio-imagepolicy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/imagetoolkitfluxcdio-imagerepository-editor/Chart.yaml b/charts/imagetoolkitfluxcdio-imagerepository-editor/Chart.yaml index 59f3bb6f82..2f9b773389 100644 --- a/charts/imagetoolkitfluxcdio-imagerepository-editor/Chart.yaml +++ b/charts/imagetoolkitfluxcdio-imagerepository-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"image.toolkit.fluxcd.io","version":"v1beta2","resource":"imagerepositories"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ImageRepository Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: imagetoolkitfluxcdio-imagerepository-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/imagetoolkitfluxcdio-imagerepository-editor/README.md b/charts/imagetoolkitfluxcdio-imagerepository-editor/README.md index e28cfba59a..76cec9a13d 100644 --- a/charts/imagetoolkitfluxcdio-imagerepository-editor/README.md +++ b/charts/imagetoolkitfluxcdio-imagerepository-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/imagetoolkitfluxcdio-imagerepository-editor --version=v0.38.0 -$ helm upgrade -i imagetoolkitfluxcdio-imagerepository-editor appscode/imagetoolkitfluxcdio-imagerepository-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/imagetoolkitfluxcdio-imagerepository-editor --version=v0.39.0 +$ helm upgrade -i imagetoolkitfluxcdio-imagerepository-editor appscode/imagetoolkitfluxcdio-imagerepository-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ImageRepository Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `imagetoolkitfluxcdio-imagerepository-editor`: ```bash -$ helm upgrade -i imagetoolkitfluxcdio-imagerepository-editor appscode/imagetoolkitfluxcdio-imagerepository-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i imagetoolkitfluxcdio-imagerepository-editor appscode/imagetoolkitfluxcdio-imagerepository-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ImageRepository Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `imagetoolkitfluxcd Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i imagetoolkitfluxcdio-imagerepository-editor appscode/imagetoolkitfluxcdio-imagerepository-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=image.toolkit.fluxcd.io/v1beta2 +$ helm upgrade -i imagetoolkitfluxcdio-imagerepository-editor appscode/imagetoolkitfluxcdio-imagerepository-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=image.toolkit.fluxcd.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i imagetoolkitfluxcdio-imagerepository-editor appscode/imagetoolkitfluxcdio-imagerepository-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i imagetoolkitfluxcdio-imagerepository-editor appscode/imagetoolkitfluxcdio-imagerepository-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/imagetoolkitfluxcdio-imageupdateautomation-editor/Chart.yaml b/charts/imagetoolkitfluxcdio-imageupdateautomation-editor/Chart.yaml index a4249fbe6d..86a96f16d3 100644 --- a/charts/imagetoolkitfluxcdio-imageupdateautomation-editor/Chart.yaml +++ b/charts/imagetoolkitfluxcdio-imageupdateautomation-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"image.toolkit.fluxcd.io","version":"v1beta2","resource":"imageupdateautomations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ImageUpdateAutomation Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: imagetoolkitfluxcdio-imageupdateautomation-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/imagetoolkitfluxcdio-imageupdateautomation-editor/README.md b/charts/imagetoolkitfluxcdio-imageupdateautomation-editor/README.md index b8df8cb9d3..d278a18fdd 100644 --- a/charts/imagetoolkitfluxcdio-imageupdateautomation-editor/README.md +++ b/charts/imagetoolkitfluxcdio-imageupdateautomation-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/imagetoolkitfluxcdio-imageupdateautomation-editor --version=v0.38.0 -$ helm upgrade -i imagetoolkitfluxcdio-imageupdateautomation-editor appscode/imagetoolkitfluxcdio-imageupdateautomation-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/imagetoolkitfluxcdio-imageupdateautomation-editor --version=v0.39.0 +$ helm upgrade -i imagetoolkitfluxcdio-imageupdateautomation-editor appscode/imagetoolkitfluxcdio-imageupdateautomation-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ImageUpdateAutomation Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `imagetoolkitfluxcdio-imageupdateautomation-editor`: ```bash -$ helm upgrade -i imagetoolkitfluxcdio-imageupdateautomation-editor appscode/imagetoolkitfluxcdio-imageupdateautomation-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i imagetoolkitfluxcdio-imageupdateautomation-editor appscode/imagetoolkitfluxcdio-imageupdateautomation-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ImageUpdateAutomation Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `imagetoolkitfluxcd Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i imagetoolkitfluxcdio-imageupdateautomation-editor appscode/imagetoolkitfluxcdio-imageupdateautomation-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=image.toolkit.fluxcd.io/v1beta2 +$ helm upgrade -i imagetoolkitfluxcdio-imageupdateautomation-editor appscode/imagetoolkitfluxcdio-imageupdateautomation-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=image.toolkit.fluxcd.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i imagetoolkitfluxcdio-imageupdateautomation-editor appscode/imagetoolkitfluxcdio-imageupdateautomation-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i imagetoolkitfluxcdio-imageupdateautomation-editor appscode/imagetoolkitfluxcdio-imageupdateautomation-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awscluster-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awscluster-editor/Chart.yaml index 26f41c64d1..2c298f110d 100644 --- a/charts/infrastructureclusterxk8sio-awscluster-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awscluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsclusters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AWSCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awscluster-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-awscluster-editor/README.md b/charts/infrastructureclusterxk8sio-awscluster-editor/README.md index 1d6cf111ae..018e7c10f1 100644 --- a/charts/infrastructureclusterxk8sio-awscluster-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awscluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awscluster-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-awscluster-editor appscode/infrastructureclusterxk8sio-awscluster-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awscluster-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-awscluster-editor appscode/infrastructureclusterxk8sio-awscluster-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSCluster Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awscluster-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awscluster-editor appscode/infrastructureclusterxk8sio-awscluster-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-awscluster-editor appscode/infrastructureclusterxk8sio-awscluster-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AWSCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awscluster-editor appscode/infrastructureclusterxk8sio-awscluster-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awscluster-editor appscode/infrastructureclusterxk8sio-awscluster-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awscluster-editor appscode/infrastructureclusterxk8sio-awscluster-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awscluster-editor appscode/infrastructureclusterxk8sio-awscluster-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor/Chart.yaml index b6c5f12cda..910cc86065 100644 --- a/charts/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsclustercontrolleridentities"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AWSClusterControllerIdentity Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awsclustercontrolleridentity-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor/README.md b/charts/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor/README.md index 7665332467..2800f1da2c 100644 --- a/charts/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-awsclustercontrolleridentity-editor appscode/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsclustercontrolleridentity-editor appscode/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSClusterControllerIdentity Editor on a [Kubernetes](http: To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awsclustercontrolleridentity-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclustercontrolleridentity-editor appscode/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsclustercontrolleridentity-editor appscode/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AWSClusterControllerIdentity Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclustercontrolleridentity-editor appscode/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awsclustercontrolleridentity-editor appscode/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclustercontrolleridentity-editor appscode/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awsclustercontrolleridentity-editor appscode/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awsclusterroleidentity-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awsclusterroleidentity-editor/Chart.yaml index 9827ce6592..68aa81a08a 100644 --- a/charts/infrastructureclusterxk8sio-awsclusterroleidentity-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awsclusterroleidentity-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsclusterroleidentities"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AWSClusterRoleIdentity Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awsclusterroleidentity-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-awsclusterroleidentity-editor/README.md b/charts/infrastructureclusterxk8sio-awsclusterroleidentity-editor/README.md index 23f4fb67b5..1a952e3757 100644 --- a/charts/infrastructureclusterxk8sio-awsclusterroleidentity-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awsclusterroleidentity-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awsclusterroleidentity-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-awsclusterroleidentity-editor appscode/infrastructureclusterxk8sio-awsclusterroleidentity-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awsclusterroleidentity-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsclusterroleidentity-editor appscode/infrastructureclusterxk8sio-awsclusterroleidentity-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSClusterRoleIdentity Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awsclusterroleidentity-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclusterroleidentity-editor appscode/infrastructureclusterxk8sio-awsclusterroleidentity-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsclusterroleidentity-editor appscode/infrastructureclusterxk8sio-awsclusterroleidentity-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AWSClusterRoleIdentity Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclusterroleidentity-editor appscode/infrastructureclusterxk8sio-awsclusterroleidentity-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awsclusterroleidentity-editor appscode/infrastructureclusterxk8sio-awsclusterroleidentity-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclusterroleidentity-editor appscode/infrastructureclusterxk8sio-awsclusterroleidentity-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awsclusterroleidentity-editor appscode/infrastructureclusterxk8sio-awsclusterroleidentity-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awsclusterstaticidentity-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awsclusterstaticidentity-editor/Chart.yaml index f992a867da..74baf95c64 100644 --- a/charts/infrastructureclusterxk8sio-awsclusterstaticidentity-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awsclusterstaticidentity-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsclusterstaticidentities"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AWSClusterStaticIdentity Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awsclusterstaticidentity-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-awsclusterstaticidentity-editor/README.md b/charts/infrastructureclusterxk8sio-awsclusterstaticidentity-editor/README.md index bce0e94dd3..c1fce9ba47 100644 --- a/charts/infrastructureclusterxk8sio-awsclusterstaticidentity-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awsclusterstaticidentity-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awsclusterstaticidentity-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-awsclusterstaticidentity-editor appscode/infrastructureclusterxk8sio-awsclusterstaticidentity-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awsclusterstaticidentity-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsclusterstaticidentity-editor appscode/infrastructureclusterxk8sio-awsclusterstaticidentity-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSClusterStaticIdentity Editor on a [Kubernetes](http://ku To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awsclusterstaticidentity-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclusterstaticidentity-editor appscode/infrastructureclusterxk8sio-awsclusterstaticidentity-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsclusterstaticidentity-editor appscode/infrastructureclusterxk8sio-awsclusterstaticidentity-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AWSClusterStaticIdentity Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclusterstaticidentity-editor appscode/infrastructureclusterxk8sio-awsclusterstaticidentity-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awsclusterstaticidentity-editor appscode/infrastructureclusterxk8sio-awsclusterstaticidentity-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclusterstaticidentity-editor appscode/infrastructureclusterxk8sio-awsclusterstaticidentity-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awsclusterstaticidentity-editor appscode/infrastructureclusterxk8sio-awsclusterstaticidentity-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awsclustertemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awsclustertemplate-editor/Chart.yaml index 2cbb0a82d3..d46e66ebd8 100644 --- a/charts/infrastructureclusterxk8sio-awsclustertemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awsclustertemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsclustertemplates"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AWSClusterTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awsclustertemplate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-awsclustertemplate-editor/README.md b/charts/infrastructureclusterxk8sio-awsclustertemplate-editor/README.md index 7111a6d52e..c9fde3cdc5 100644 --- a/charts/infrastructureclusterxk8sio-awsclustertemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awsclustertemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awsclustertemplate-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-awsclustertemplate-editor appscode/infrastructureclusterxk8sio-awsclustertemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awsclustertemplate-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsclustertemplate-editor appscode/infrastructureclusterxk8sio-awsclustertemplate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSClusterTemplate Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awsclustertemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclustertemplate-editor appscode/infrastructureclusterxk8sio-awsclustertemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsclustertemplate-editor appscode/infrastructureclusterxk8sio-awsclustertemplate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AWSClusterTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclustertemplate-editor appscode/infrastructureclusterxk8sio-awsclustertemplate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awsclustertemplate-editor appscode/infrastructureclusterxk8sio-awsclustertemplate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclustertemplate-editor appscode/infrastructureclusterxk8sio-awsclustertemplate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awsclustertemplate-editor appscode/infrastructureclusterxk8sio-awsclustertemplate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awsfargateprofile-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awsfargateprofile-editor/Chart.yaml index 93ca814728..34698e6d8c 100644 --- a/charts/infrastructureclusterxk8sio-awsfargateprofile-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awsfargateprofile-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsfargateprofiles"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AWSFargateProfile Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awsfargateprofile-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-awsfargateprofile-editor/README.md b/charts/infrastructureclusterxk8sio-awsfargateprofile-editor/README.md index 53223ceb9c..eff801505e 100644 --- a/charts/infrastructureclusterxk8sio-awsfargateprofile-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awsfargateprofile-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awsfargateprofile-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-awsfargateprofile-editor appscode/infrastructureclusterxk8sio-awsfargateprofile-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awsfargateprofile-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsfargateprofile-editor appscode/infrastructureclusterxk8sio-awsfargateprofile-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSFargateProfile Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awsfargateprofile-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsfargateprofile-editor appscode/infrastructureclusterxk8sio-awsfargateprofile-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsfargateprofile-editor appscode/infrastructureclusterxk8sio-awsfargateprofile-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AWSFargateProfile Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsfargateprofile-editor appscode/infrastructureclusterxk8sio-awsfargateprofile-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awsfargateprofile-editor appscode/infrastructureclusterxk8sio-awsfargateprofile-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsfargateprofile-editor appscode/infrastructureclusterxk8sio-awsfargateprofile-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awsfargateprofile-editor appscode/infrastructureclusterxk8sio-awsfargateprofile-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awsmachine-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awsmachine-editor/Chart.yaml index 24b3024db8..a2c7203240 100644 --- a/charts/infrastructureclusterxk8sio-awsmachine-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awsmachine-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsmachines"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AWSMachine Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awsmachine-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-awsmachine-editor/README.md b/charts/infrastructureclusterxk8sio-awsmachine-editor/README.md index 3839c7ae3b..81afecc97b 100644 --- a/charts/infrastructureclusterxk8sio-awsmachine-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awsmachine-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awsmachine-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-awsmachine-editor appscode/infrastructureclusterxk8sio-awsmachine-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awsmachine-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsmachine-editor appscode/infrastructureclusterxk8sio-awsmachine-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSMachine Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awsmachine-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmachine-editor appscode/infrastructureclusterxk8sio-awsmachine-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsmachine-editor appscode/infrastructureclusterxk8sio-awsmachine-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AWSMachine Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmachine-editor appscode/infrastructureclusterxk8sio-awsmachine-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awsmachine-editor appscode/infrastructureclusterxk8sio-awsmachine-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmachine-editor appscode/infrastructureclusterxk8sio-awsmachine-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awsmachine-editor appscode/infrastructureclusterxk8sio-awsmachine-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awsmachinepool-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awsmachinepool-editor/Chart.yaml index dfcd131f74..40c2e0411e 100644 --- a/charts/infrastructureclusterxk8sio-awsmachinepool-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awsmachinepool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsmachinepools"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AWSMachinePool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awsmachinepool-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-awsmachinepool-editor/README.md b/charts/infrastructureclusterxk8sio-awsmachinepool-editor/README.md index 6979fc830f..c0e7763b5c 100644 --- a/charts/infrastructureclusterxk8sio-awsmachinepool-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awsmachinepool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awsmachinepool-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-awsmachinepool-editor appscode/infrastructureclusterxk8sio-awsmachinepool-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awsmachinepool-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsmachinepool-editor appscode/infrastructureclusterxk8sio-awsmachinepool-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSMachinePool Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awsmachinepool-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmachinepool-editor appscode/infrastructureclusterxk8sio-awsmachinepool-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsmachinepool-editor appscode/infrastructureclusterxk8sio-awsmachinepool-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AWSMachinePool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmachinepool-editor appscode/infrastructureclusterxk8sio-awsmachinepool-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awsmachinepool-editor appscode/infrastructureclusterxk8sio-awsmachinepool-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmachinepool-editor appscode/infrastructureclusterxk8sio-awsmachinepool-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awsmachinepool-editor appscode/infrastructureclusterxk8sio-awsmachinepool-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awsmachinetemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awsmachinetemplate-editor/Chart.yaml index 5f097ae479..87deb91baf 100644 --- a/charts/infrastructureclusterxk8sio-awsmachinetemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awsmachinetemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsmachinetemplates"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AWSMachineTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awsmachinetemplate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-awsmachinetemplate-editor/README.md b/charts/infrastructureclusterxk8sio-awsmachinetemplate-editor/README.md index 98850b9bd3..6d95042056 100644 --- a/charts/infrastructureclusterxk8sio-awsmachinetemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awsmachinetemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awsmachinetemplate-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-awsmachinetemplate-editor appscode/infrastructureclusterxk8sio-awsmachinetemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awsmachinetemplate-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsmachinetemplate-editor appscode/infrastructureclusterxk8sio-awsmachinetemplate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSMachineTemplate Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awsmachinetemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmachinetemplate-editor appscode/infrastructureclusterxk8sio-awsmachinetemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsmachinetemplate-editor appscode/infrastructureclusterxk8sio-awsmachinetemplate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AWSMachineTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmachinetemplate-editor appscode/infrastructureclusterxk8sio-awsmachinetemplate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awsmachinetemplate-editor appscode/infrastructureclusterxk8sio-awsmachinetemplate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmachinetemplate-editor appscode/infrastructureclusterxk8sio-awsmachinetemplate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awsmachinetemplate-editor appscode/infrastructureclusterxk8sio-awsmachinetemplate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awsmanagedcluster-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awsmanagedcluster-editor/Chart.yaml index 458819d9d9..244754eb39 100644 --- a/charts/infrastructureclusterxk8sio-awsmanagedcluster-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awsmanagedcluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsmanagedclusters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AWSManagedCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awsmanagedcluster-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-awsmanagedcluster-editor/README.md b/charts/infrastructureclusterxk8sio-awsmanagedcluster-editor/README.md index 22c661579f..be576ca9f3 100644 --- a/charts/infrastructureclusterxk8sio-awsmanagedcluster-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awsmanagedcluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awsmanagedcluster-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedcluster-editor appscode/infrastructureclusterxk8sio-awsmanagedcluster-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awsmanagedcluster-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedcluster-editor appscode/infrastructureclusterxk8sio-awsmanagedcluster-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSManagedCluster Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awsmanagedcluster-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedcluster-editor appscode/infrastructureclusterxk8sio-awsmanagedcluster-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedcluster-editor appscode/infrastructureclusterxk8sio-awsmanagedcluster-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AWSManagedCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedcluster-editor appscode/infrastructureclusterxk8sio-awsmanagedcluster-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedcluster-editor appscode/infrastructureclusterxk8sio-awsmanagedcluster-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedcluster-editor appscode/infrastructureclusterxk8sio-awsmanagedcluster-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedcluster-editor appscode/infrastructureclusterxk8sio-awsmanagedcluster-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awsmanagedmachinepool-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awsmanagedmachinepool-editor/Chart.yaml index 897ee79f8b..fe63e9e300 100644 --- a/charts/infrastructureclusterxk8sio-awsmanagedmachinepool-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awsmanagedmachinepool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsmanagedmachinepools"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AWSManagedMachinePool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awsmanagedmachinepool-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-awsmanagedmachinepool-editor/README.md b/charts/infrastructureclusterxk8sio-awsmanagedmachinepool-editor/README.md index 1e3fddeff4..c1416d1eb1 100644 --- a/charts/infrastructureclusterxk8sio-awsmanagedmachinepool-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awsmanagedmachinepool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awsmanagedmachinepool-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-awsmanagedmachinepool-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awsmanagedmachinepool-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-awsmanagedmachinepool-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSManagedMachinePool Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awsmanagedmachinepool-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-awsmanagedmachinepool-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-awsmanagedmachinepool-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AWSManagedMachinePool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-awsmanagedmachinepool-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-awsmanagedmachinepool-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-awsmanagedmachinepool-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-awsmanagedmachinepool-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedcluster-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azureasomanagedcluster-editor/Chart.yaml index 4ba5ad6b0b..2d28dbeaf9 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedcluster-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azureasomanagedcluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1alpha1","resource":"azureasomanagedclusters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureASOManagedCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azureasomanagedcluster-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedcluster-editor/README.md b/charts/infrastructureclusterxk8sio-azureasomanagedcluster-editor/README.md index 0f4abf7fae..82f214b79b 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedcluster-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azureasomanagedcluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedcluster-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcluster-editor appscode/infrastructureclusterxk8sio-azureasomanagedcluster-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedcluster-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcluster-editor appscode/infrastructureclusterxk8sio-azureasomanagedcluster-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureASOManagedCluster Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azureasomanagedcluster-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcluster-editor appscode/infrastructureclusterxk8sio-azureasomanagedcluster-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcluster-editor appscode/infrastructureclusterxk8sio-azureasomanagedcluster-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureASOManagedCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcluster-editor appscode/infrastructureclusterxk8sio-azureasomanagedcluster-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcluster-editor appscode/infrastructureclusterxk8sio-azureasomanagedcluster-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcluster-editor appscode/infrastructureclusterxk8sio-azureasomanagedcluster-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcluster-editor appscode/infrastructureclusterxk8sio-azureasomanagedcluster-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor/Chart.yaml index 14a297c88c..98f36ad0af 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1alpha1","resource":"azureasomanagedclustertemplates"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureASOManagedClusterTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor/README.md b/charts/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor/README.md index 0f8c6be3ab..69b1d7f4d4 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureASOManagedClusterTemplate Editor on a [Kubernetes](htt To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureASOManagedClusterTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor/Chart.yaml index 487ad805cb..ad4de047a0 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1alpha1","resource":"azureasomanagedcontrolplanes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureASOManagedControlPlane Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor/README.md b/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor/README.md index 811beb7ec1..10760e5bd3 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureASOManagedControlPlane Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureASOManagedControlPlane Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor/Chart.yaml index 90c054dce1..53f9494424 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1alpha1","resource":"azureasomanagedcontrolplanetemplates"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureASOManagedControlPlaneTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor/README.md b/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor/README.md index 3a0ead4fa0..16b7393927 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureASOManagedControlPlaneTemplate Editor on a [Kubernetes To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureASOManagedControlPlaneTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor/Chart.yaml index 47aaca068c..d8e70823a8 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1alpha1","resource":"azureasomanagedmachinepools"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureASOManagedMachinePool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azureasomanagedmachinepool-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor/README.md b/charts/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor/README.md index 1d6f772281..40ba10b94d 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureASOManagedMachinePool Editor on a [Kubernetes](http:// To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azureasomanagedmachinepool-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureASOManagedMachinePool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor/Chart.yaml index b14b56fb5f..e3d0f0ac70 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1alpha1","resource":"azureasomanagedmachinepooltemplates"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureASOManagedMachinePoolTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor/README.md b/charts/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor/README.md index 7b2086a4f4..fdd5c58979 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureASOManagedMachinePoolTemplate Editor on a [Kubernetes] To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureASOManagedMachinePoolTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azurecluster-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azurecluster-editor/Chart.yaml index c7da4ce3ac..98f5c13210 100644 --- a/charts/infrastructureclusterxk8sio-azurecluster-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azurecluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azureclusters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azurecluster-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azurecluster-editor/README.md b/charts/infrastructureclusterxk8sio-azurecluster-editor/README.md index 954d23e9f3..a62da32d29 100644 --- a/charts/infrastructureclusterxk8sio-azurecluster-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azurecluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azurecluster-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azurecluster-editor appscode/infrastructureclusterxk8sio-azurecluster-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azurecluster-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azurecluster-editor appscode/infrastructureclusterxk8sio-azurecluster-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureCluster Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azurecluster-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azurecluster-editor appscode/infrastructureclusterxk8sio-azurecluster-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azurecluster-editor appscode/infrastructureclusterxk8sio-azurecluster-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azurecluster-editor appscode/infrastructureclusterxk8sio-azurecluster-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azurecluster-editor appscode/infrastructureclusterxk8sio-azurecluster-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azurecluster-editor appscode/infrastructureclusterxk8sio-azurecluster-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azurecluster-editor appscode/infrastructureclusterxk8sio-azurecluster-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azureclusteridentity-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azureclusteridentity-editor/Chart.yaml index cbfa613217..d71117dcd6 100644 --- a/charts/infrastructureclusterxk8sio-azureclusteridentity-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azureclusteridentity-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azureclusteridentities"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureClusterIdentity Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azureclusteridentity-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azureclusteridentity-editor/README.md b/charts/infrastructureclusterxk8sio-azureclusteridentity-editor/README.md index f0c2ce8e62..bc478d2017 100644 --- a/charts/infrastructureclusterxk8sio-azureclusteridentity-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azureclusteridentity-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azureclusteridentity-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azureclusteridentity-editor appscode/infrastructureclusterxk8sio-azureclusteridentity-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azureclusteridentity-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureclusteridentity-editor appscode/infrastructureclusterxk8sio-azureclusteridentity-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureClusterIdentity Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azureclusteridentity-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureclusteridentity-editor appscode/infrastructureclusterxk8sio-azureclusteridentity-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureclusteridentity-editor appscode/infrastructureclusterxk8sio-azureclusteridentity-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureClusterIdentity Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureclusteridentity-editor appscode/infrastructureclusterxk8sio-azureclusteridentity-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azureclusteridentity-editor appscode/infrastructureclusterxk8sio-azureclusteridentity-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureclusteridentity-editor appscode/infrastructureclusterxk8sio-azureclusteridentity-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azureclusteridentity-editor appscode/infrastructureclusterxk8sio-azureclusteridentity-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azureclustertemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azureclustertemplate-editor/Chart.yaml index a95e3ac54c..1867c5137a 100644 --- a/charts/infrastructureclusterxk8sio-azureclustertemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azureclustertemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azureclustertemplates"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureClusterTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azureclustertemplate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azureclustertemplate-editor/README.md b/charts/infrastructureclusterxk8sio-azureclustertemplate-editor/README.md index d542a80225..44aeaf382b 100644 --- a/charts/infrastructureclusterxk8sio-azureclustertemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azureclustertemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azureclustertemplate-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azureclustertemplate-editor appscode/infrastructureclusterxk8sio-azureclustertemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azureclustertemplate-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureclustertemplate-editor appscode/infrastructureclusterxk8sio-azureclustertemplate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureClusterTemplate Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azureclustertemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureclustertemplate-editor appscode/infrastructureclusterxk8sio-azureclustertemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureclustertemplate-editor appscode/infrastructureclusterxk8sio-azureclustertemplate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureClusterTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureclustertemplate-editor appscode/infrastructureclusterxk8sio-azureclustertemplate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azureclustertemplate-editor appscode/infrastructureclusterxk8sio-azureclustertemplate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureclustertemplate-editor appscode/infrastructureclusterxk8sio-azureclustertemplate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azureclustertemplate-editor appscode/infrastructureclusterxk8sio-azureclustertemplate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuremachine-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuremachine-editor/Chart.yaml index d2565d82ed..e963849c32 100644 --- a/charts/infrastructureclusterxk8sio-azuremachine-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuremachine-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azuremachines"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureMachine Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuremachine-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azuremachine-editor/README.md b/charts/infrastructureclusterxk8sio-azuremachine-editor/README.md index 77851113a5..12ae7f1209 100644 --- a/charts/infrastructureclusterxk8sio-azuremachine-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuremachine-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuremachine-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuremachine-editor appscode/infrastructureclusterxk8sio-azuremachine-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuremachine-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachine-editor appscode/infrastructureclusterxk8sio-azuremachine-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureMachine Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuremachine-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachine-editor appscode/infrastructureclusterxk8sio-azuremachine-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachine-editor appscode/infrastructureclusterxk8sio-azuremachine-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureMachine Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachine-editor appscode/infrastructureclusterxk8sio-azuremachine-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachine-editor appscode/infrastructureclusterxk8sio-azuremachine-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachine-editor appscode/infrastructureclusterxk8sio-azuremachine-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuremachine-editor appscode/infrastructureclusterxk8sio-azuremachine-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuremachinepool-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuremachinepool-editor/Chart.yaml index ec9e453b29..1667999fb4 100644 --- a/charts/infrastructureclusterxk8sio-azuremachinepool-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuremachinepool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azuremachinepools"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureMachinePool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuremachinepool-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azuremachinepool-editor/README.md b/charts/infrastructureclusterxk8sio-azuremachinepool-editor/README.md index 62a954291b..f7bb496b82 100644 --- a/charts/infrastructureclusterxk8sio-azuremachinepool-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuremachinepool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuremachinepool-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepool-editor appscode/infrastructureclusterxk8sio-azuremachinepool-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuremachinepool-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepool-editor appscode/infrastructureclusterxk8sio-azuremachinepool-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureMachinePool Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuremachinepool-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepool-editor appscode/infrastructureclusterxk8sio-azuremachinepool-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepool-editor appscode/infrastructureclusterxk8sio-azuremachinepool-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureMachinePool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepool-editor appscode/infrastructureclusterxk8sio-azuremachinepool-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepool-editor appscode/infrastructureclusterxk8sio-azuremachinepool-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepool-editor appscode/infrastructureclusterxk8sio-azuremachinepool-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepool-editor appscode/infrastructureclusterxk8sio-azuremachinepool-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuremachinepoolmachine-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuremachinepoolmachine-editor/Chart.yaml index 792e41a929..fe1850d387 100644 --- a/charts/infrastructureclusterxk8sio-azuremachinepoolmachine-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuremachinepoolmachine-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azuremachinepoolmachines"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureMachinePoolMachine Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuremachinepoolmachine-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azuremachinepoolmachine-editor/README.md b/charts/infrastructureclusterxk8sio-azuremachinepoolmachine-editor/README.md index 480c1456e9..f8be93796f 100644 --- a/charts/infrastructureclusterxk8sio-azuremachinepoolmachine-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuremachinepoolmachine-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuremachinepoolmachine-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepoolmachine-editor appscode/infrastructureclusterxk8sio-azuremachinepoolmachine-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuremachinepoolmachine-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepoolmachine-editor appscode/infrastructureclusterxk8sio-azuremachinepoolmachine-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureMachinePoolMachine Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuremachinepoolmachine-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepoolmachine-editor appscode/infrastructureclusterxk8sio-azuremachinepoolmachine-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepoolmachine-editor appscode/infrastructureclusterxk8sio-azuremachinepoolmachine-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureMachinePoolMachine Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepoolmachine-editor appscode/infrastructureclusterxk8sio-azuremachinepoolmachine-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepoolmachine-editor appscode/infrastructureclusterxk8sio-azuremachinepoolmachine-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepoolmachine-editor appscode/infrastructureclusterxk8sio-azuremachinepoolmachine-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepoolmachine-editor appscode/infrastructureclusterxk8sio-azuremachinepoolmachine-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuremachinetemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuremachinetemplate-editor/Chart.yaml index e1d62400cc..5329080075 100644 --- a/charts/infrastructureclusterxk8sio-azuremachinetemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuremachinetemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azuremachinetemplates"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureMachineTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuremachinetemplate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azuremachinetemplate-editor/README.md b/charts/infrastructureclusterxk8sio-azuremachinetemplate-editor/README.md index 5477c179ae..acb19b1a7e 100644 --- a/charts/infrastructureclusterxk8sio-azuremachinetemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuremachinetemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuremachinetemplate-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinetemplate-editor appscode/infrastructureclusterxk8sio-azuremachinetemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuremachinetemplate-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinetemplate-editor appscode/infrastructureclusterxk8sio-azuremachinetemplate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureMachineTemplate Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuremachinetemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinetemplate-editor appscode/infrastructureclusterxk8sio-azuremachinetemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinetemplate-editor appscode/infrastructureclusterxk8sio-azuremachinetemplate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureMachineTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinetemplate-editor appscode/infrastructureclusterxk8sio-azuremachinetemplate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinetemplate-editor appscode/infrastructureclusterxk8sio-azuremachinetemplate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinetemplate-editor appscode/infrastructureclusterxk8sio-azuremachinetemplate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinetemplate-editor appscode/infrastructureclusterxk8sio-azuremachinetemplate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuremanagedcluster-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuremanagedcluster-editor/Chart.yaml index 29689ee6ff..482666c00c 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedcluster-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuremanagedcluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azuremanagedclusters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureManagedCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuremanagedcluster-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azuremanagedcluster-editor/README.md b/charts/infrastructureclusterxk8sio-azuremanagedcluster-editor/README.md index 5f59696a66..2e26650121 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedcluster-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuremanagedcluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedcluster-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcluster-editor appscode/infrastructureclusterxk8sio-azuremanagedcluster-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedcluster-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcluster-editor appscode/infrastructureclusterxk8sio-azuremanagedcluster-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureManagedCluster Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuremanagedcluster-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcluster-editor appscode/infrastructureclusterxk8sio-azuremanagedcluster-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcluster-editor appscode/infrastructureclusterxk8sio-azuremanagedcluster-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureManagedCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcluster-editor appscode/infrastructureclusterxk8sio-azuremanagedcluster-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcluster-editor appscode/infrastructureclusterxk8sio-azuremanagedcluster-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcluster-editor appscode/infrastructureclusterxk8sio-azuremanagedcluster-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcluster-editor appscode/infrastructureclusterxk8sio-azuremanagedcluster-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor/Chart.yaml index 2d196828cb..cfa5104362 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azuremanagedclustertemplates"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureManagedClusterTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuremanagedclustertemplate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor/README.md b/charts/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor/README.md index 74958ebc15..7b987dd565 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureManagedClusterTemplate Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuremanagedclustertemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureManagedClusterTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor/Chart.yaml index d895264253..224312d3e6 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azuremanagedcontrolplanes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureManagedControlPlane Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuremanagedcontrolplane-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor/README.md b/charts/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor/README.md index 90d6bdfd92..6d23d01c39 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureManagedControlPlane Editor on a [Kubernetes](http://ku To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuremanagedcontrolplane-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureManagedControlPlane Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor/Chart.yaml index f0ac3eaad1..c28c6e91db 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azuremanagedcontrolplanetemplates"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureManagedControlPlaneTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor/README.md b/charts/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor/README.md index 88b32dc33b..544774c1d6 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureManagedControlPlaneTemplate Editor on a [Kubernetes](h To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureManagedControlPlaneTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuremanagedmachinepool-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuremanagedmachinepool-editor/Chart.yaml index a23cab34b7..a7a0a64dba 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedmachinepool-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuremanagedmachinepool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azuremanagedmachinepools"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureManagedMachinePool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuremanagedmachinepool-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azuremanagedmachinepool-editor/README.md b/charts/infrastructureclusterxk8sio-azuremanagedmachinepool-editor/README.md index ca9a77ac8a..0361177917 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedmachinepool-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuremanagedmachinepool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedmachinepool-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepool-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedmachinepool-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepool-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureManagedMachinePool Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuremanagedmachinepool-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepool-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepool-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureManagedMachinePool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepool-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepool-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepool-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepool-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor/Chart.yaml index c1287131cf..1fef79d329 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azuremanagedmachinepooltemplates"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureManagedMachinePoolTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor/README.md b/charts/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor/README.md index 313252c406..68063eb818 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureManagedMachinePoolTemplate Editor on a [Kubernetes](ht To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureManagedMachinePoolTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azureserviceprincipal-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azureserviceprincipal-editor/Chart.yaml index ca55272794..772d5de6f0 100644 --- a/charts/infrastructureclusterxk8sio-azureserviceprincipal-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azureserviceprincipal-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1alpha3","resource":"azureserviceprincipals"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureServicePrincipal Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azureserviceprincipal-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azureserviceprincipal-editor/README.md b/charts/infrastructureclusterxk8sio-azureserviceprincipal-editor/README.md index b72b054399..a4b1c942cb 100644 --- a/charts/infrastructureclusterxk8sio-azureserviceprincipal-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azureserviceprincipal-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azureserviceprincipal-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azureserviceprincipal-editor appscode/infrastructureclusterxk8sio-azureserviceprincipal-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azureserviceprincipal-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureserviceprincipal-editor appscode/infrastructureclusterxk8sio-azureserviceprincipal-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureServicePrincipal Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azureserviceprincipal-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureserviceprincipal-editor appscode/infrastructureclusterxk8sio-azureserviceprincipal-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureserviceprincipal-editor appscode/infrastructureclusterxk8sio-azureserviceprincipal-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureServicePrincipal Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureserviceprincipal-editor appscode/infrastructureclusterxk8sio-azureserviceprincipal-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha3 +$ helm upgrade -i infrastructureclusterxk8sio-azureserviceprincipal-editor appscode/infrastructureclusterxk8sio-azureserviceprincipal-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha3 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureserviceprincipal-editor appscode/infrastructureclusterxk8sio-azureserviceprincipal-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azureserviceprincipal-editor appscode/infrastructureclusterxk8sio-azureserviceprincipal-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuresystemassignedidentity-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuresystemassignedidentity-editor/Chart.yaml index 0570c6e9e2..59250bac86 100644 --- a/charts/infrastructureclusterxk8sio-azuresystemassignedidentity-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuresystemassignedidentity-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1alpha3","resource":"azuresystemassignedidentites"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureSystemAssignedIdentity Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuresystemassignedidentity-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azuresystemassignedidentity-editor/README.md b/charts/infrastructureclusterxk8sio-azuresystemassignedidentity-editor/README.md index 5b852c25b1..7d515099cd 100644 --- a/charts/infrastructureclusterxk8sio-azuresystemassignedidentity-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuresystemassignedidentity-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuresystemassignedidentity-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuresystemassignedidentity-editor appscode/infrastructureclusterxk8sio-azuresystemassignedidentity-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuresystemassignedidentity-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuresystemassignedidentity-editor appscode/infrastructureclusterxk8sio-azuresystemassignedidentity-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureSystemAssignedIdentity Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuresystemassignedidentity-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuresystemassignedidentity-editor appscode/infrastructureclusterxk8sio-azuresystemassignedidentity-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuresystemassignedidentity-editor appscode/infrastructureclusterxk8sio-azuresystemassignedidentity-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureSystemAssignedIdentity Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuresystemassignedidentity-editor appscode/infrastructureclusterxk8sio-azuresystemassignedidentity-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha3 +$ helm upgrade -i infrastructureclusterxk8sio-azuresystemassignedidentity-editor appscode/infrastructureclusterxk8sio-azuresystemassignedidentity-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha3 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuresystemassignedidentity-editor appscode/infrastructureclusterxk8sio-azuresystemassignedidentity-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuresystemassignedidentity-editor appscode/infrastructureclusterxk8sio-azuresystemassignedidentity-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azureuserassignedidentity-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azureuserassignedidentity-editor/Chart.yaml index ff5f79ff4e..08b8fee487 100644 --- a/charts/infrastructureclusterxk8sio-azureuserassignedidentity-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azureuserassignedidentity-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1alpha3","resource":"azureuserassignedidentites"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AzureUserAssignedIdentity Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azureuserassignedidentity-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-azureuserassignedidentity-editor/README.md b/charts/infrastructureclusterxk8sio-azureuserassignedidentity-editor/README.md index 068fd55a47..51ed3c4629 100644 --- a/charts/infrastructureclusterxk8sio-azureuserassignedidentity-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azureuserassignedidentity-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azureuserassignedidentity-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-azureuserassignedidentity-editor appscode/infrastructureclusterxk8sio-azureuserassignedidentity-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azureuserassignedidentity-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureuserassignedidentity-editor appscode/infrastructureclusterxk8sio-azureuserassignedidentity-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureUserAssignedIdentity Editor on a [Kubernetes](http://k To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azureuserassignedidentity-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureuserassignedidentity-editor appscode/infrastructureclusterxk8sio-azureuserassignedidentity-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureuserassignedidentity-editor appscode/infrastructureclusterxk8sio-azureuserassignedidentity-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AzureUserAssignedIdentity Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureuserassignedidentity-editor appscode/infrastructureclusterxk8sio-azureuserassignedidentity-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha3 +$ helm upgrade -i infrastructureclusterxk8sio-azureuserassignedidentity-editor appscode/infrastructureclusterxk8sio-azureuserassignedidentity-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha3 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureuserassignedidentity-editor appscode/infrastructureclusterxk8sio-azureuserassignedidentity-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azureuserassignedidentity-editor appscode/infrastructureclusterxk8sio-azureuserassignedidentity-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-gcpcluster-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-gcpcluster-editor/Chart.yaml index 8165b5ce4b..e14a8ae88c 100644 --- a/charts/infrastructureclusterxk8sio-gcpcluster-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-gcpcluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"gcpclusters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GCPCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-gcpcluster-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-gcpcluster-editor/README.md b/charts/infrastructureclusterxk8sio-gcpcluster-editor/README.md index e3894cfcbe..2cdd92b298 100644 --- a/charts/infrastructureclusterxk8sio-gcpcluster-editor/README.md +++ b/charts/infrastructureclusterxk8sio-gcpcluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-gcpcluster-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-gcpcluster-editor appscode/infrastructureclusterxk8sio-gcpcluster-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-gcpcluster-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpcluster-editor appscode/infrastructureclusterxk8sio-gcpcluster-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GCPCluster Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `infrastructureclusterxk8sio-gcpcluster-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpcluster-editor appscode/infrastructureclusterxk8sio-gcpcluster-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpcluster-editor appscode/infrastructureclusterxk8sio-gcpcluster-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GCPCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpcluster-editor appscode/infrastructureclusterxk8sio-gcpcluster-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-gcpcluster-editor appscode/infrastructureclusterxk8sio-gcpcluster-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpcluster-editor appscode/infrastructureclusterxk8sio-gcpcluster-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-gcpcluster-editor appscode/infrastructureclusterxk8sio-gcpcluster-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-gcpclustertemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-gcpclustertemplate-editor/Chart.yaml index a53673ff12..0a2ca7f056 100644 --- a/charts/infrastructureclusterxk8sio-gcpclustertemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-gcpclustertemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"gcpclustertemplates"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GCPClusterTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-gcpclustertemplate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-gcpclustertemplate-editor/README.md b/charts/infrastructureclusterxk8sio-gcpclustertemplate-editor/README.md index 6c24ed39b1..7bdaaa0777 100644 --- a/charts/infrastructureclusterxk8sio-gcpclustertemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-gcpclustertemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-gcpclustertemplate-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-gcpclustertemplate-editor appscode/infrastructureclusterxk8sio-gcpclustertemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-gcpclustertemplate-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpclustertemplate-editor appscode/infrastructureclusterxk8sio-gcpclustertemplate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GCPClusterTemplate Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `infrastructureclusterxk8sio-gcpclustertemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpclustertemplate-editor appscode/infrastructureclusterxk8sio-gcpclustertemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpclustertemplate-editor appscode/infrastructureclusterxk8sio-gcpclustertemplate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GCPClusterTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpclustertemplate-editor appscode/infrastructureclusterxk8sio-gcpclustertemplate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-gcpclustertemplate-editor appscode/infrastructureclusterxk8sio-gcpclustertemplate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpclustertemplate-editor appscode/infrastructureclusterxk8sio-gcpclustertemplate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-gcpclustertemplate-editor appscode/infrastructureclusterxk8sio-gcpclustertemplate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-gcpmachine-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-gcpmachine-editor/Chart.yaml index 396c799d16..7702b69a2a 100644 --- a/charts/infrastructureclusterxk8sio-gcpmachine-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-gcpmachine-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"gcpmachines"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GCPMachine Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-gcpmachine-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-gcpmachine-editor/README.md b/charts/infrastructureclusterxk8sio-gcpmachine-editor/README.md index 2b42c907ee..1f0ef86894 100644 --- a/charts/infrastructureclusterxk8sio-gcpmachine-editor/README.md +++ b/charts/infrastructureclusterxk8sio-gcpmachine-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-gcpmachine-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-gcpmachine-editor appscode/infrastructureclusterxk8sio-gcpmachine-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-gcpmachine-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmachine-editor appscode/infrastructureclusterxk8sio-gcpmachine-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GCPMachine Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `infrastructureclusterxk8sio-gcpmachine-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmachine-editor appscode/infrastructureclusterxk8sio-gcpmachine-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmachine-editor appscode/infrastructureclusterxk8sio-gcpmachine-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GCPMachine Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmachine-editor appscode/infrastructureclusterxk8sio-gcpmachine-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmachine-editor appscode/infrastructureclusterxk8sio-gcpmachine-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmachine-editor appscode/infrastructureclusterxk8sio-gcpmachine-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-gcpmachine-editor appscode/infrastructureclusterxk8sio-gcpmachine-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-gcpmachinetemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-gcpmachinetemplate-editor/Chart.yaml index 56c9fac402..d451a161be 100644 --- a/charts/infrastructureclusterxk8sio-gcpmachinetemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-gcpmachinetemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"gcpmachinetemplates"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GCPMachineTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-gcpmachinetemplate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-gcpmachinetemplate-editor/README.md b/charts/infrastructureclusterxk8sio-gcpmachinetemplate-editor/README.md index 1596d2502f..9f82791188 100644 --- a/charts/infrastructureclusterxk8sio-gcpmachinetemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-gcpmachinetemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-gcpmachinetemplate-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-gcpmachinetemplate-editor appscode/infrastructureclusterxk8sio-gcpmachinetemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-gcpmachinetemplate-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmachinetemplate-editor appscode/infrastructureclusterxk8sio-gcpmachinetemplate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GCPMachineTemplate Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `infrastructureclusterxk8sio-gcpmachinetemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmachinetemplate-editor appscode/infrastructureclusterxk8sio-gcpmachinetemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmachinetemplate-editor appscode/infrastructureclusterxk8sio-gcpmachinetemplate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GCPMachineTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmachinetemplate-editor appscode/infrastructureclusterxk8sio-gcpmachinetemplate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmachinetemplate-editor appscode/infrastructureclusterxk8sio-gcpmachinetemplate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmachinetemplate-editor appscode/infrastructureclusterxk8sio-gcpmachinetemplate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-gcpmachinetemplate-editor appscode/infrastructureclusterxk8sio-gcpmachinetemplate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-gcpmanagedcluster-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-gcpmanagedcluster-editor/Chart.yaml index 784cc35955..e258e1e1a2 100644 --- a/charts/infrastructureclusterxk8sio-gcpmanagedcluster-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-gcpmanagedcluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"gcpmanagedclusters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GCPManagedCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-gcpmanagedcluster-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-gcpmanagedcluster-editor/README.md b/charts/infrastructureclusterxk8sio-gcpmanagedcluster-editor/README.md index a023b82e25..ccd8d3c75d 100644 --- a/charts/infrastructureclusterxk8sio-gcpmanagedcluster-editor/README.md +++ b/charts/infrastructureclusterxk8sio-gcpmanagedcluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-gcpmanagedcluster-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcluster-editor appscode/infrastructureclusterxk8sio-gcpmanagedcluster-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-gcpmanagedcluster-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcluster-editor appscode/infrastructureclusterxk8sio-gcpmanagedcluster-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GCPManagedCluster Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `infrastructureclusterxk8sio-gcpmanagedcluster-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcluster-editor appscode/infrastructureclusterxk8sio-gcpmanagedcluster-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcluster-editor appscode/infrastructureclusterxk8sio-gcpmanagedcluster-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GCPManagedCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcluster-editor appscode/infrastructureclusterxk8sio-gcpmanagedcluster-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcluster-editor appscode/infrastructureclusterxk8sio-gcpmanagedcluster-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcluster-editor appscode/infrastructureclusterxk8sio-gcpmanagedcluster-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcluster-editor appscode/infrastructureclusterxk8sio-gcpmanagedcluster-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor/Chart.yaml index e6ff8c0fff..214868d065 100644 --- a/charts/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"gcpmanagedcontrolplanes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GCPManagedControlPlane Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor/README.md b/charts/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor/README.md index 7ff456ffb8..d577205e25 100644 --- a/charts/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor/README.md +++ b/charts/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GCPManagedControlPlane Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GCPManagedControlPlane Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor/Chart.yaml index 488db0a3fc..f574d9ed85 100644 --- a/charts/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"gcpmanagedmachinepools"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GCPManagedMachinePool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-gcpmanagedmachinepool-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor/README.md b/charts/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor/README.md index 13c8b0495a..382949b8e3 100644 --- a/charts/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor/README.md +++ b/charts/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GCPManagedMachinePool Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `infrastructureclusterxk8sio-gcpmanagedmachinepool-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GCPManagedMachinePool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-rosacluster-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-rosacluster-editor/Chart.yaml index 862daf6354..988444e38a 100644 --- a/charts/infrastructureclusterxk8sio-rosacluster-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-rosacluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"rosaclusters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ROSACluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-rosacluster-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-rosacluster-editor/README.md b/charts/infrastructureclusterxk8sio-rosacluster-editor/README.md index 245b580de9..c2766a0209 100644 --- a/charts/infrastructureclusterxk8sio-rosacluster-editor/README.md +++ b/charts/infrastructureclusterxk8sio-rosacluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-rosacluster-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-rosacluster-editor appscode/infrastructureclusterxk8sio-rosacluster-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-rosacluster-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-rosacluster-editor appscode/infrastructureclusterxk8sio-rosacluster-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ROSACluster Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `infrastructureclusterxk8sio-rosacluster-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-rosacluster-editor appscode/infrastructureclusterxk8sio-rosacluster-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-rosacluster-editor appscode/infrastructureclusterxk8sio-rosacluster-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ROSACluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-rosacluster-editor appscode/infrastructureclusterxk8sio-rosacluster-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-rosacluster-editor appscode/infrastructureclusterxk8sio-rosacluster-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-rosacluster-editor appscode/infrastructureclusterxk8sio-rosacluster-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-rosacluster-editor appscode/infrastructureclusterxk8sio-rosacluster-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-rosamachinepool-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-rosamachinepool-editor/Chart.yaml index 2a68e057e6..3b6f2406e0 100644 --- a/charts/infrastructureclusterxk8sio-rosamachinepool-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-rosamachinepool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"rosamachinepools"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ROSAMachinePool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-rosamachinepool-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/infrastructureclusterxk8sio-rosamachinepool-editor/README.md b/charts/infrastructureclusterxk8sio-rosamachinepool-editor/README.md index 81a83cdcbe..8aec6afd7a 100644 --- a/charts/infrastructureclusterxk8sio-rosamachinepool-editor/README.md +++ b/charts/infrastructureclusterxk8sio-rosamachinepool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-rosamachinepool-editor --version=v0.38.0 -$ helm upgrade -i infrastructureclusterxk8sio-rosamachinepool-editor appscode/infrastructureclusterxk8sio-rosamachinepool-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/infrastructureclusterxk8sio-rosamachinepool-editor --version=v0.39.0 +$ helm upgrade -i infrastructureclusterxk8sio-rosamachinepool-editor appscode/infrastructureclusterxk8sio-rosamachinepool-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ROSAMachinePool Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `infrastructureclusterxk8sio-rosamachinepool-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-rosamachinepool-editor appscode/infrastructureclusterxk8sio-rosamachinepool-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i infrastructureclusterxk8sio-rosamachinepool-editor appscode/infrastructureclusterxk8sio-rosamachinepool-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ROSAMachinePool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-rosamachinepool-editor appscode/infrastructureclusterxk8sio-rosamachinepool-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-rosamachinepool-editor appscode/infrastructureclusterxk8sio-rosamachinepool-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-rosamachinepool-editor appscode/infrastructureclusterxk8sio-rosamachinepool-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-rosamachinepool-editor appscode/infrastructureclusterxk8sio-rosamachinepool-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/internalapiserverk8sio-storageversion-editor/Chart.yaml b/charts/internalapiserverk8sio-storageversion-editor/Chart.yaml index 224ca9fd6b..23417b3338 100644 --- a/charts/internalapiserverk8sio-storageversion-editor/Chart.yaml +++ b/charts/internalapiserverk8sio-storageversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"internal.apiserver.k8s.io","version":"v1alpha1","resource":"storageversions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: StorageVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: internalapiserverk8sio-storageversion-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/internalapiserverk8sio-storageversion-editor/README.md b/charts/internalapiserverk8sio-storageversion-editor/README.md index 0489f12789..8f1bf5399b 100644 --- a/charts/internalapiserverk8sio-storageversion-editor/README.md +++ b/charts/internalapiserverk8sio-storageversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/internalapiserverk8sio-storageversion-editor --version=v0.38.0 -$ helm upgrade -i internalapiserverk8sio-storageversion-editor appscode/internalapiserverk8sio-storageversion-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/internalapiserverk8sio-storageversion-editor --version=v0.39.0 +$ helm upgrade -i internalapiserverk8sio-storageversion-editor appscode/internalapiserverk8sio-storageversion-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a StorageVersion Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `internalapiserverk8sio-storageversion-editor`: ```bash -$ helm upgrade -i internalapiserverk8sio-storageversion-editor appscode/internalapiserverk8sio-storageversion-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i internalapiserverk8sio-storageversion-editor appscode/internalapiserverk8sio-storageversion-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a StorageVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `internalapiserverk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i internalapiserverk8sio-storageversion-editor appscode/internalapiserverk8sio-storageversion-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=internal.apiserver.k8s.io/v1alpha1 +$ helm upgrade -i internalapiserverk8sio-storageversion-editor appscode/internalapiserverk8sio-storageversion-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=internal.apiserver.k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i internalapiserverk8sio-storageversion-editor appscode/internalapiserverk8sio-storageversion-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i internalapiserverk8sio-storageversion-editor appscode/internalapiserverk8sio-storageversion-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/ipamclusterxk8sio-ipaddress-editor/Chart.yaml b/charts/ipamclusterxk8sio-ipaddress-editor/Chart.yaml index 575366249d..e4b4a7c28b 100644 --- a/charts/ipamclusterxk8sio-ipaddress-editor/Chart.yaml +++ b/charts/ipamclusterxk8sio-ipaddress-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ipam.cluster.x-k8s.io","version":"v1beta1","resource":"ipaddresses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: IPAddress Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: ipamclusterxk8sio-ipaddress-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/ipamclusterxk8sio-ipaddress-editor/README.md b/charts/ipamclusterxk8sio-ipaddress-editor/README.md index 47d1295417..bd843edfb7 100644 --- a/charts/ipamclusterxk8sio-ipaddress-editor/README.md +++ b/charts/ipamclusterxk8sio-ipaddress-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/ipamclusterxk8sio-ipaddress-editor --version=v0.38.0 -$ helm upgrade -i ipamclusterxk8sio-ipaddress-editor appscode/ipamclusterxk8sio-ipaddress-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/ipamclusterxk8sio-ipaddress-editor --version=v0.39.0 +$ helm upgrade -i ipamclusterxk8sio-ipaddress-editor appscode/ipamclusterxk8sio-ipaddress-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a IPAddress Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `ipamclusterxk8sio-ipaddress-editor`: ```bash -$ helm upgrade -i ipamclusterxk8sio-ipaddress-editor appscode/ipamclusterxk8sio-ipaddress-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i ipamclusterxk8sio-ipaddress-editor appscode/ipamclusterxk8sio-ipaddress-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a IPAddress Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `ipamclusterxk8sio- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i ipamclusterxk8sio-ipaddress-editor appscode/ipamclusterxk8sio-ipaddress-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ipam.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i ipamclusterxk8sio-ipaddress-editor appscode/ipamclusterxk8sio-ipaddress-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ipam.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i ipamclusterxk8sio-ipaddress-editor appscode/ipamclusterxk8sio-ipaddress-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i ipamclusterxk8sio-ipaddress-editor appscode/ipamclusterxk8sio-ipaddress-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/ipamclusterxk8sio-ipaddressclaim-editor/Chart.yaml b/charts/ipamclusterxk8sio-ipaddressclaim-editor/Chart.yaml index 16eb8c2a44..08838c080d 100644 --- a/charts/ipamclusterxk8sio-ipaddressclaim-editor/Chart.yaml +++ b/charts/ipamclusterxk8sio-ipaddressclaim-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ipam.cluster.x-k8s.io","version":"v1beta1","resource":"ipaddressclaims"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: IPAddressClaim Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: ipamclusterxk8sio-ipaddressclaim-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/ipamclusterxk8sio-ipaddressclaim-editor/README.md b/charts/ipamclusterxk8sio-ipaddressclaim-editor/README.md index 2ca4f32c7a..38afd8bd58 100644 --- a/charts/ipamclusterxk8sio-ipaddressclaim-editor/README.md +++ b/charts/ipamclusterxk8sio-ipaddressclaim-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/ipamclusterxk8sio-ipaddressclaim-editor --version=v0.38.0 -$ helm upgrade -i ipamclusterxk8sio-ipaddressclaim-editor appscode/ipamclusterxk8sio-ipaddressclaim-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/ipamclusterxk8sio-ipaddressclaim-editor --version=v0.39.0 +$ helm upgrade -i ipamclusterxk8sio-ipaddressclaim-editor appscode/ipamclusterxk8sio-ipaddressclaim-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a IPAddressClaim Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `ipamclusterxk8sio-ipaddressclaim-editor`: ```bash -$ helm upgrade -i ipamclusterxk8sio-ipaddressclaim-editor appscode/ipamclusterxk8sio-ipaddressclaim-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i ipamclusterxk8sio-ipaddressclaim-editor appscode/ipamclusterxk8sio-ipaddressclaim-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a IPAddressClaim Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `ipamclusterxk8sio- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i ipamclusterxk8sio-ipaddressclaim-editor appscode/ipamclusterxk8sio-ipaddressclaim-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ipam.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i ipamclusterxk8sio-ipaddressclaim-editor appscode/ipamclusterxk8sio-ipaddressclaim-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ipam.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i ipamclusterxk8sio-ipaddressclaim-editor appscode/ipamclusterxk8sio-ipaddressclaim-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i ipamclusterxk8sio-ipaddressclaim-editor appscode/ipamclusterxk8sio-ipaddressclaim-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kafkaawskubedbcom-cluster-editor/Chart.yaml b/charts/kafkaawskubedbcom-cluster-editor/Chart.yaml index 47a459d420..83f4882276 100644 --- a/charts/kafkaawskubedbcom-cluster-editor/Chart.yaml +++ b/charts/kafkaawskubedbcom-cluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kafka.aws.kubedb.com","version":"v1alpha1","resource":"clusters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Cluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kafkaawskubedbcom-cluster-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kafkaawskubedbcom-cluster-editor/README.md b/charts/kafkaawskubedbcom-cluster-editor/README.md index 55185f17fb..798c2488be 100644 --- a/charts/kafkaawskubedbcom-cluster-editor/README.md +++ b/charts/kafkaawskubedbcom-cluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kafkaawskubedbcom-cluster-editor --version=v0.38.0 -$ helm upgrade -i kafkaawskubedbcom-cluster-editor appscode/kafkaawskubedbcom-cluster-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kafkaawskubedbcom-cluster-editor --version=v0.39.0 +$ helm upgrade -i kafkaawskubedbcom-cluster-editor appscode/kafkaawskubedbcom-cluster-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Cluster Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `kafkaawskubedbcom-cluster-editor`: ```bash -$ helm upgrade -i kafkaawskubedbcom-cluster-editor appscode/kafkaawskubedbcom-cluster-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kafkaawskubedbcom-cluster-editor appscode/kafkaawskubedbcom-cluster-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Cluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kafkaawskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kafkaawskubedbcom-cluster-editor appscode/kafkaawskubedbcom-cluster-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=kafka.aws.kubedb.com/v1alpha1 +$ helm upgrade -i kafkaawskubedbcom-cluster-editor appscode/kafkaawskubedbcom-cluster-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=kafka.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kafkaawskubedbcom-cluster-editor appscode/kafkaawskubedbcom-cluster-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kafkaawskubedbcom-cluster-editor appscode/kafkaawskubedbcom-cluster-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kafkaawskubedbcom-configuration-editor/Chart.yaml b/charts/kafkaawskubedbcom-configuration-editor/Chart.yaml index f15945d489..1c792e49bd 100644 --- a/charts/kafkaawskubedbcom-configuration-editor/Chart.yaml +++ b/charts/kafkaawskubedbcom-configuration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kafka.aws.kubedb.com","version":"v1alpha1","resource":"configurations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Configuration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kafkaawskubedbcom-configuration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kafkaawskubedbcom-configuration-editor/README.md b/charts/kafkaawskubedbcom-configuration-editor/README.md index 438dc78064..7a6261795f 100644 --- a/charts/kafkaawskubedbcom-configuration-editor/README.md +++ b/charts/kafkaawskubedbcom-configuration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kafkaawskubedbcom-configuration-editor --version=v0.38.0 -$ helm upgrade -i kafkaawskubedbcom-configuration-editor appscode/kafkaawskubedbcom-configuration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kafkaawskubedbcom-configuration-editor --version=v0.39.0 +$ helm upgrade -i kafkaawskubedbcom-configuration-editor appscode/kafkaawskubedbcom-configuration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Configuration Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `kafkaawskubedbcom-configuration-editor`: ```bash -$ helm upgrade -i kafkaawskubedbcom-configuration-editor appscode/kafkaawskubedbcom-configuration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kafkaawskubedbcom-configuration-editor appscode/kafkaawskubedbcom-configuration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Configuration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kafkaawskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kafkaawskubedbcom-configuration-editor appscode/kafkaawskubedbcom-configuration-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=kafka.aws.kubedb.com/v1alpha1 +$ helm upgrade -i kafkaawskubedbcom-configuration-editor appscode/kafkaawskubedbcom-configuration-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=kafka.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kafkaawskubedbcom-configuration-editor appscode/kafkaawskubedbcom-configuration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kafkaawskubedbcom-configuration-editor appscode/kafkaawskubedbcom-configuration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kafkakubedbcom-connectcluster-editor/Chart.yaml b/charts/kafkakubedbcom-connectcluster-editor/Chart.yaml index 6121d96621..60298d222f 100644 --- a/charts/kafkakubedbcom-connectcluster-editor/Chart.yaml +++ b/charts/kafkakubedbcom-connectcluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kafka.kubedb.com","version":"v1alpha1","resource":"connectclusters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ConnectCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kafkakubedbcom-connectcluster-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kafkakubedbcom-connectcluster-editor/README.md b/charts/kafkakubedbcom-connectcluster-editor/README.md index 03edb99b4f..322648f31b 100644 --- a/charts/kafkakubedbcom-connectcluster-editor/README.md +++ b/charts/kafkakubedbcom-connectcluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kafkakubedbcom-connectcluster-editor --version=v0.38.0 -$ helm upgrade -i kafkakubedbcom-connectcluster-editor appscode/kafkakubedbcom-connectcluster-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kafkakubedbcom-connectcluster-editor --version=v0.39.0 +$ helm upgrade -i kafkakubedbcom-connectcluster-editor appscode/kafkakubedbcom-connectcluster-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ConnectCluster Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `kafkakubedbcom-connectcluster-editor`: ```bash -$ helm upgrade -i kafkakubedbcom-connectcluster-editor appscode/kafkakubedbcom-connectcluster-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kafkakubedbcom-connectcluster-editor appscode/kafkakubedbcom-connectcluster-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ConnectCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kafkakubedbcom-con Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kafkakubedbcom-connectcluster-editor appscode/kafkakubedbcom-connectcluster-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=kafka.kubedb.com/v1alpha1 +$ helm upgrade -i kafkakubedbcom-connectcluster-editor appscode/kafkakubedbcom-connectcluster-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=kafka.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kafkakubedbcom-connectcluster-editor appscode/kafkakubedbcom-connectcluster-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kafkakubedbcom-connectcluster-editor appscode/kafkakubedbcom-connectcluster-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kafkakubedbcom-connector-editor/Chart.yaml b/charts/kafkakubedbcom-connector-editor/Chart.yaml index 841231499a..22f4c3ca91 100644 --- a/charts/kafkakubedbcom-connector-editor/Chart.yaml +++ b/charts/kafkakubedbcom-connector-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kafka.kubedb.com","version":"v1alpha1","resource":"connectors"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Connector Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kafkakubedbcom-connector-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kafkakubedbcom-connector-editor/README.md b/charts/kafkakubedbcom-connector-editor/README.md index 4de7ecd9f2..5dbbbfe968 100644 --- a/charts/kafkakubedbcom-connector-editor/README.md +++ b/charts/kafkakubedbcom-connector-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kafkakubedbcom-connector-editor --version=v0.38.0 -$ helm upgrade -i kafkakubedbcom-connector-editor appscode/kafkakubedbcom-connector-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kafkakubedbcom-connector-editor --version=v0.39.0 +$ helm upgrade -i kafkakubedbcom-connector-editor appscode/kafkakubedbcom-connector-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Connector Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `kafkakubedbcom-connector-editor`: ```bash -$ helm upgrade -i kafkakubedbcom-connector-editor appscode/kafkakubedbcom-connector-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kafkakubedbcom-connector-editor appscode/kafkakubedbcom-connector-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Connector Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kafkakubedbcom-con Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kafkakubedbcom-connector-editor appscode/kafkakubedbcom-connector-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=kafka.kubedb.com/v1alpha1 +$ helm upgrade -i kafkakubedbcom-connector-editor appscode/kafkakubedbcom-connector-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=kafka.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kafkakubedbcom-connector-editor appscode/kafkakubedbcom-connector-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kafkakubedbcom-connector-editor appscode/kafkakubedbcom-connector-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kafkakubedbcom-restproxy-editor/Chart.yaml b/charts/kafkakubedbcom-restproxy-editor/Chart.yaml index 2ae3f20575..27e1ac6552 100644 --- a/charts/kafkakubedbcom-restproxy-editor/Chart.yaml +++ b/charts/kafkakubedbcom-restproxy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kafka.kubedb.com","version":"v1alpha1","resource":"restproxies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RestProxy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kafkakubedbcom-restproxy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kafkakubedbcom-restproxy-editor/README.md b/charts/kafkakubedbcom-restproxy-editor/README.md index 599486ba14..3c743b26e0 100644 --- a/charts/kafkakubedbcom-restproxy-editor/README.md +++ b/charts/kafkakubedbcom-restproxy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kafkakubedbcom-restproxy-editor --version=v0.38.0 -$ helm upgrade -i kafkakubedbcom-restproxy-editor appscode/kafkakubedbcom-restproxy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kafkakubedbcom-restproxy-editor --version=v0.39.0 +$ helm upgrade -i kafkakubedbcom-restproxy-editor appscode/kafkakubedbcom-restproxy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RestProxy Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `kafkakubedbcom-restproxy-editor`: ```bash -$ helm upgrade -i kafkakubedbcom-restproxy-editor appscode/kafkakubedbcom-restproxy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kafkakubedbcom-restproxy-editor appscode/kafkakubedbcom-restproxy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RestProxy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kafkakubedbcom-res Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kafkakubedbcom-restproxy-editor appscode/kafkakubedbcom-restproxy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=kafka.kubedb.com/v1alpha1 +$ helm upgrade -i kafkakubedbcom-restproxy-editor appscode/kafkakubedbcom-restproxy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=kafka.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kafkakubedbcom-restproxy-editor appscode/kafkakubedbcom-restproxy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kafkakubedbcom-restproxy-editor appscode/kafkakubedbcom-restproxy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kafkakubedbcom-schemaregistry-editor/Chart.yaml b/charts/kafkakubedbcom-schemaregistry-editor/Chart.yaml index f3dc5e6851..b32bec30c2 100644 --- a/charts/kafkakubedbcom-schemaregistry-editor/Chart.yaml +++ b/charts/kafkakubedbcom-schemaregistry-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kafka.kubedb.com","version":"v1alpha1","resource":"schemaregistries"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SchemaRegistry Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kafkakubedbcom-schemaregistry-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kafkakubedbcom-schemaregistry-editor/README.md b/charts/kafkakubedbcom-schemaregistry-editor/README.md index b1eb085232..184145490f 100644 --- a/charts/kafkakubedbcom-schemaregistry-editor/README.md +++ b/charts/kafkakubedbcom-schemaregistry-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kafkakubedbcom-schemaregistry-editor --version=v0.38.0 -$ helm upgrade -i kafkakubedbcom-schemaregistry-editor appscode/kafkakubedbcom-schemaregistry-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kafkakubedbcom-schemaregistry-editor --version=v0.39.0 +$ helm upgrade -i kafkakubedbcom-schemaregistry-editor appscode/kafkakubedbcom-schemaregistry-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SchemaRegistry Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `kafkakubedbcom-schemaregistry-editor`: ```bash -$ helm upgrade -i kafkakubedbcom-schemaregistry-editor appscode/kafkakubedbcom-schemaregistry-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kafkakubedbcom-schemaregistry-editor appscode/kafkakubedbcom-schemaregistry-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SchemaRegistry Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kafkakubedbcom-sch Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kafkakubedbcom-schemaregistry-editor appscode/kafkakubedbcom-schemaregistry-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=kafka.kubedb.com/v1alpha1 +$ helm upgrade -i kafkakubedbcom-schemaregistry-editor appscode/kafkakubedbcom-schemaregistry-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=kafka.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kafkakubedbcom-schemaregistry-editor appscode/kafkakubedbcom-schemaregistry-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kafkakubedbcom-schemaregistry-editor appscode/kafkakubedbcom-schemaregistry-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/karpenterazurecom-aksnodeclass-editor/Chart.yaml b/charts/karpenterazurecom-aksnodeclass-editor/Chart.yaml index dfd97df02e..0a51997184 100644 --- a/charts/karpenterazurecom-aksnodeclass-editor/Chart.yaml +++ b/charts/karpenterazurecom-aksnodeclass-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"karpenter.azure.com","version":"v1alpha2","resource":"aksnodeclasses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AKSNodeClass Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: karpenterazurecom-aksnodeclass-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/karpenterazurecom-aksnodeclass-editor/README.md b/charts/karpenterazurecom-aksnodeclass-editor/README.md index 9ef89e7f8c..1b2505f113 100644 --- a/charts/karpenterazurecom-aksnodeclass-editor/README.md +++ b/charts/karpenterazurecom-aksnodeclass-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/karpenterazurecom-aksnodeclass-editor --version=v0.38.0 -$ helm upgrade -i karpenterazurecom-aksnodeclass-editor appscode/karpenterazurecom-aksnodeclass-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/karpenterazurecom-aksnodeclass-editor --version=v0.39.0 +$ helm upgrade -i karpenterazurecom-aksnodeclass-editor appscode/karpenterazurecom-aksnodeclass-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AKSNodeClass Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `karpenterazurecom-aksnodeclass-editor`: ```bash -$ helm upgrade -i karpenterazurecom-aksnodeclass-editor appscode/karpenterazurecom-aksnodeclass-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i karpenterazurecom-aksnodeclass-editor appscode/karpenterazurecom-aksnodeclass-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AKSNodeClass Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `karpenterazurecom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i karpenterazurecom-aksnodeclass-editor appscode/karpenterazurecom-aksnodeclass-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=karpenter.azure.com/v1alpha2 +$ helm upgrade -i karpenterazurecom-aksnodeclass-editor appscode/karpenterazurecom-aksnodeclass-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=karpenter.azure.com/v1alpha2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i karpenterazurecom-aksnodeclass-editor appscode/karpenterazurecom-aksnodeclass-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i karpenterazurecom-aksnodeclass-editor appscode/karpenterazurecom-aksnodeclass-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/karpenterk8saws-ec2nodeclass-editor/Chart.yaml b/charts/karpenterk8saws-ec2nodeclass-editor/Chart.yaml index e0badd9ef7..64f3e30769 100644 --- a/charts/karpenterk8saws-ec2nodeclass-editor/Chart.yaml +++ b/charts/karpenterk8saws-ec2nodeclass-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"karpenter.k8s.aws","version":"v1beta1","resource":"ec2nodeclasses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: EC2NodeClass Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: karpenterk8saws-ec2nodeclass-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/karpenterk8saws-ec2nodeclass-editor/README.md b/charts/karpenterk8saws-ec2nodeclass-editor/README.md index bc6c8658cd..aee81640e3 100644 --- a/charts/karpenterk8saws-ec2nodeclass-editor/README.md +++ b/charts/karpenterk8saws-ec2nodeclass-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/karpenterk8saws-ec2nodeclass-editor --version=v0.38.0 -$ helm upgrade -i karpenterk8saws-ec2nodeclass-editor appscode/karpenterk8saws-ec2nodeclass-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/karpenterk8saws-ec2nodeclass-editor --version=v0.39.0 +$ helm upgrade -i karpenterk8saws-ec2nodeclass-editor appscode/karpenterk8saws-ec2nodeclass-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EC2NodeClass Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `karpenterk8saws-ec2nodeclass-editor`: ```bash -$ helm upgrade -i karpenterk8saws-ec2nodeclass-editor appscode/karpenterk8saws-ec2nodeclass-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i karpenterk8saws-ec2nodeclass-editor appscode/karpenterk8saws-ec2nodeclass-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a EC2NodeClass Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `karpenterk8saws-ec Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i karpenterk8saws-ec2nodeclass-editor appscode/karpenterk8saws-ec2nodeclass-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=karpenter.k8s.aws/v1beta1 +$ helm upgrade -i karpenterk8saws-ec2nodeclass-editor appscode/karpenterk8saws-ec2nodeclass-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=karpenter.k8s.aws/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i karpenterk8saws-ec2nodeclass-editor appscode/karpenterk8saws-ec2nodeclass-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i karpenterk8saws-ec2nodeclass-editor appscode/karpenterk8saws-ec2nodeclass-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/karpentersh-nodeclaim-editor/Chart.yaml b/charts/karpentersh-nodeclaim-editor/Chart.yaml index 26eb9b071e..0bb418da39 100644 --- a/charts/karpentersh-nodeclaim-editor/Chart.yaml +++ b/charts/karpentersh-nodeclaim-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"karpenter.sh","version":"v1beta1","resource":"nodeclaims"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: NodeClaim Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: karpentersh-nodeclaim-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/karpentersh-nodeclaim-editor/README.md b/charts/karpentersh-nodeclaim-editor/README.md index 74e46d6ecf..b4bcdbb40b 100644 --- a/charts/karpentersh-nodeclaim-editor/README.md +++ b/charts/karpentersh-nodeclaim-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/karpentersh-nodeclaim-editor --version=v0.38.0 -$ helm upgrade -i karpentersh-nodeclaim-editor appscode/karpentersh-nodeclaim-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/karpentersh-nodeclaim-editor --version=v0.39.0 +$ helm upgrade -i karpentersh-nodeclaim-editor appscode/karpentersh-nodeclaim-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a NodeClaim Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `karpentersh-nodeclaim-editor`: ```bash -$ helm upgrade -i karpentersh-nodeclaim-editor appscode/karpentersh-nodeclaim-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i karpentersh-nodeclaim-editor appscode/karpentersh-nodeclaim-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a NodeClaim Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `karpentersh-nodecl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i karpentersh-nodeclaim-editor appscode/karpentersh-nodeclaim-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=karpenter.sh/v1beta1 +$ helm upgrade -i karpentersh-nodeclaim-editor appscode/karpentersh-nodeclaim-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=karpenter.sh/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i karpentersh-nodeclaim-editor appscode/karpentersh-nodeclaim-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i karpentersh-nodeclaim-editor appscode/karpentersh-nodeclaim-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/karpentersh-nodepool-editor/Chart.yaml b/charts/karpentersh-nodepool-editor/Chart.yaml index 6e0bb69892..26030d2ca1 100644 --- a/charts/karpentersh-nodepool-editor/Chart.yaml +++ b/charts/karpentersh-nodepool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"karpenter.sh","version":"v1beta1","resource":"nodepools"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: NodePool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: karpentersh-nodepool-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/karpentersh-nodepool-editor/README.md b/charts/karpentersh-nodepool-editor/README.md index 36eff24ce2..65bfcb500d 100644 --- a/charts/karpentersh-nodepool-editor/README.md +++ b/charts/karpentersh-nodepool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/karpentersh-nodepool-editor --version=v0.38.0 -$ helm upgrade -i karpentersh-nodepool-editor appscode/karpentersh-nodepool-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/karpentersh-nodepool-editor --version=v0.39.0 +$ helm upgrade -i karpentersh-nodepool-editor appscode/karpentersh-nodepool-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a NodePool Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `karpentersh-nodepool-editor`: ```bash -$ helm upgrade -i karpentersh-nodepool-editor appscode/karpentersh-nodepool-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i karpentersh-nodepool-editor appscode/karpentersh-nodepool-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a NodePool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `karpentersh-nodepo Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i karpentersh-nodepool-editor appscode/karpentersh-nodepool-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=karpenter.sh/v1beta1 +$ helm upgrade -i karpentersh-nodepool-editor appscode/karpentersh-nodepool-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=karpenter.sh/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i karpentersh-nodepool-editor appscode/karpentersh-nodepool-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i karpentersh-nodepool-editor appscode/karpentersh-nodepool-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/keyvaultazurekubedbcom-key-editor/Chart.yaml b/charts/keyvaultazurekubedbcom-key-editor/Chart.yaml index 3c075638c0..7fe1d87367 100644 --- a/charts/keyvaultazurekubedbcom-key-editor/Chart.yaml +++ b/charts/keyvaultazurekubedbcom-key-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"keyvault.azure.kubedb.com","version":"v1alpha1","resource":"keys"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Key Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: keyvaultazurekubedbcom-key-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/keyvaultazurekubedbcom-key-editor/README.md b/charts/keyvaultazurekubedbcom-key-editor/README.md index f02d7d16d2..aa2e1b42a2 100644 --- a/charts/keyvaultazurekubedbcom-key-editor/README.md +++ b/charts/keyvaultazurekubedbcom-key-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/keyvaultazurekubedbcom-key-editor --version=v0.38.0 -$ helm upgrade -i keyvaultazurekubedbcom-key-editor appscode/keyvaultazurekubedbcom-key-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/keyvaultazurekubedbcom-key-editor --version=v0.39.0 +$ helm upgrade -i keyvaultazurekubedbcom-key-editor appscode/keyvaultazurekubedbcom-key-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Key Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `keyvaultazurekubedbcom-key-editor`: ```bash -$ helm upgrade -i keyvaultazurekubedbcom-key-editor appscode/keyvaultazurekubedbcom-key-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i keyvaultazurekubedbcom-key-editor appscode/keyvaultazurekubedbcom-key-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Key Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `keyvaultazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i keyvaultazurekubedbcom-key-editor appscode/keyvaultazurekubedbcom-key-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=keyvault.azure.kubedb.com/v1alpha1 +$ helm upgrade -i keyvaultazurekubedbcom-key-editor appscode/keyvaultazurekubedbcom-key-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=keyvault.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i keyvaultazurekubedbcom-key-editor appscode/keyvaultazurekubedbcom-key-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i keyvaultazurekubedbcom-key-editor appscode/keyvaultazurekubedbcom-key-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/keyvaultazurekubedbcom-vault-editor/Chart.yaml b/charts/keyvaultazurekubedbcom-vault-editor/Chart.yaml index a457420ecd..30f706f293 100644 --- a/charts/keyvaultazurekubedbcom-vault-editor/Chart.yaml +++ b/charts/keyvaultazurekubedbcom-vault-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"keyvault.azure.kubedb.com","version":"v1alpha1","resource":"vaults"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Vault Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: keyvaultazurekubedbcom-vault-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/keyvaultazurekubedbcom-vault-editor/README.md b/charts/keyvaultazurekubedbcom-vault-editor/README.md index 73b3216a26..906ebe79b8 100644 --- a/charts/keyvaultazurekubedbcom-vault-editor/README.md +++ b/charts/keyvaultazurekubedbcom-vault-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/keyvaultazurekubedbcom-vault-editor --version=v0.38.0 -$ helm upgrade -i keyvaultazurekubedbcom-vault-editor appscode/keyvaultazurekubedbcom-vault-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/keyvaultazurekubedbcom-vault-editor --version=v0.39.0 +$ helm upgrade -i keyvaultazurekubedbcom-vault-editor appscode/keyvaultazurekubedbcom-vault-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Vault Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `keyvaultazurekubedbcom-vault-editor`: ```bash -$ helm upgrade -i keyvaultazurekubedbcom-vault-editor appscode/keyvaultazurekubedbcom-vault-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i keyvaultazurekubedbcom-vault-editor appscode/keyvaultazurekubedbcom-vault-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Vault Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `keyvaultazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i keyvaultazurekubedbcom-vault-editor appscode/keyvaultazurekubedbcom-vault-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=keyvault.azure.kubedb.com/v1alpha1 +$ helm upgrade -i keyvaultazurekubedbcom-vault-editor appscode/keyvaultazurekubedbcom-vault-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=keyvault.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i keyvaultazurekubedbcom-vault-editor appscode/keyvaultazurekubedbcom-vault-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i keyvaultazurekubedbcom-vault-editor appscode/keyvaultazurekubedbcom-vault-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kinesisawskubedbcom-stream-editor/Chart.yaml b/charts/kinesisawskubedbcom-stream-editor/Chart.yaml index 57e746617e..2662877567 100644 --- a/charts/kinesisawskubedbcom-stream-editor/Chart.yaml +++ b/charts/kinesisawskubedbcom-stream-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kinesis.aws.kubedb.com","version":"v1alpha1","resource":"streams"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Stream Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kinesisawskubedbcom-stream-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kinesisawskubedbcom-stream-editor/README.md b/charts/kinesisawskubedbcom-stream-editor/README.md index af10184194..722d71cdf4 100644 --- a/charts/kinesisawskubedbcom-stream-editor/README.md +++ b/charts/kinesisawskubedbcom-stream-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kinesisawskubedbcom-stream-editor --version=v0.38.0 -$ helm upgrade -i kinesisawskubedbcom-stream-editor appscode/kinesisawskubedbcom-stream-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kinesisawskubedbcom-stream-editor --version=v0.39.0 +$ helm upgrade -i kinesisawskubedbcom-stream-editor appscode/kinesisawskubedbcom-stream-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Stream Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `kinesisawskubedbcom-stream-editor`: ```bash -$ helm upgrade -i kinesisawskubedbcom-stream-editor appscode/kinesisawskubedbcom-stream-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kinesisawskubedbcom-stream-editor appscode/kinesisawskubedbcom-stream-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Stream Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kinesisawskubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kinesisawskubedbcom-stream-editor appscode/kinesisawskubedbcom-stream-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=kinesis.aws.kubedb.com/v1alpha1 +$ helm upgrade -i kinesisawskubedbcom-stream-editor appscode/kinesisawskubedbcom-stream-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=kinesis.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kinesisawskubedbcom-stream-editor appscode/kinesisawskubedbcom-stream-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kinesisawskubedbcom-stream-editor appscode/kinesisawskubedbcom-stream-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kmsawskubedbcom-key-editor/Chart.yaml b/charts/kmsawskubedbcom-key-editor/Chart.yaml index f7c4c5a4aa..7eaa2a96aa 100644 --- a/charts/kmsawskubedbcom-key-editor/Chart.yaml +++ b/charts/kmsawskubedbcom-key-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kms.aws.kubedb.com","version":"v1alpha1","resource":"keys"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Key Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kmsawskubedbcom-key-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kmsawskubedbcom-key-editor/README.md b/charts/kmsawskubedbcom-key-editor/README.md index edcd271b74..3ebaf116cd 100644 --- a/charts/kmsawskubedbcom-key-editor/README.md +++ b/charts/kmsawskubedbcom-key-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kmsawskubedbcom-key-editor --version=v0.38.0 -$ helm upgrade -i kmsawskubedbcom-key-editor appscode/kmsawskubedbcom-key-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kmsawskubedbcom-key-editor --version=v0.39.0 +$ helm upgrade -i kmsawskubedbcom-key-editor appscode/kmsawskubedbcom-key-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Key Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `kmsawskubedbcom-key-editor`: ```bash -$ helm upgrade -i kmsawskubedbcom-key-editor appscode/kmsawskubedbcom-key-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kmsawskubedbcom-key-editor appscode/kmsawskubedbcom-key-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Key Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kmsawskubedbcom-ke Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kmsawskubedbcom-key-editor appscode/kmsawskubedbcom-key-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=kms.aws.kubedb.com/v1alpha1 +$ helm upgrade -i kmsawskubedbcom-key-editor appscode/kmsawskubedbcom-key-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=kms.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kmsawskubedbcom-key-editor appscode/kmsawskubedbcom-key-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kmsawskubedbcom-key-editor appscode/kmsawskubedbcom-key-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubebindappscodecom-apiservicebinding-editor/Chart.yaml b/charts/kubebindappscodecom-apiservicebinding-editor/Chart.yaml index 81b9094fda..d4408939fa 100644 --- a/charts/kubebindappscodecom-apiservicebinding-editor/Chart.yaml +++ b/charts/kubebindappscodecom-apiservicebinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kube-bind.appscode.com","version":"v1alpha1","resource":"apiservicebindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: APIServiceBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kubebindappscodecom-apiservicebinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubebindappscodecom-apiservicebinding-editor/README.md b/charts/kubebindappscodecom-apiservicebinding-editor/README.md index 2478bb9aa9..790aa8d2ff 100644 --- a/charts/kubebindappscodecom-apiservicebinding-editor/README.md +++ b/charts/kubebindappscodecom-apiservicebinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubebindappscodecom-apiservicebinding-editor --version=v0.38.0 -$ helm upgrade -i kubebindappscodecom-apiservicebinding-editor appscode/kubebindappscodecom-apiservicebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubebindappscodecom-apiservicebinding-editor --version=v0.39.0 +$ helm upgrade -i kubebindappscodecom-apiservicebinding-editor appscode/kubebindappscodecom-apiservicebinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a APIServiceBinding Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `kubebindappscodecom-apiservicebinding-editor`: ```bash -$ helm upgrade -i kubebindappscodecom-apiservicebinding-editor appscode/kubebindappscodecom-apiservicebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubebindappscodecom-apiservicebinding-editor appscode/kubebindappscodecom-apiservicebinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a APIServiceBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kubebindappscodeco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubebindappscodecom-apiservicebinding-editor appscode/kubebindappscodecom-apiservicebinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=kube-bind.appscode.com/v1alpha1 +$ helm upgrade -i kubebindappscodecom-apiservicebinding-editor appscode/kubebindappscodecom-apiservicebinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=kube-bind.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubebindappscodecom-apiservicebinding-editor appscode/kubebindappscodecom-apiservicebinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubebindappscodecom-apiservicebinding-editor appscode/kubebindappscodecom-apiservicebinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubebindappscodecom-apiserviceexport-editor/Chart.yaml b/charts/kubebindappscodecom-apiserviceexport-editor/Chart.yaml index d6b0c290c2..4b63256459 100644 --- a/charts/kubebindappscodecom-apiserviceexport-editor/Chart.yaml +++ b/charts/kubebindappscodecom-apiserviceexport-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kube-bind.appscode.com","version":"v1alpha1","resource":"apiserviceexports"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: APIServiceExport Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kubebindappscodecom-apiserviceexport-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubebindappscodecom-apiserviceexport-editor/README.md b/charts/kubebindappscodecom-apiserviceexport-editor/README.md index c53a36f1a0..bcfc76ce9b 100644 --- a/charts/kubebindappscodecom-apiserviceexport-editor/README.md +++ b/charts/kubebindappscodecom-apiserviceexport-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubebindappscodecom-apiserviceexport-editor --version=v0.38.0 -$ helm upgrade -i kubebindappscodecom-apiserviceexport-editor appscode/kubebindappscodecom-apiserviceexport-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubebindappscodecom-apiserviceexport-editor --version=v0.39.0 +$ helm upgrade -i kubebindappscodecom-apiserviceexport-editor appscode/kubebindappscodecom-apiserviceexport-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a APIServiceExport Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `kubebindappscodecom-apiserviceexport-editor`: ```bash -$ helm upgrade -i kubebindappscodecom-apiserviceexport-editor appscode/kubebindappscodecom-apiserviceexport-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubebindappscodecom-apiserviceexport-editor appscode/kubebindappscodecom-apiserviceexport-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a APIServiceExport Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kubebindappscodeco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubebindappscodecom-apiserviceexport-editor appscode/kubebindappscodecom-apiserviceexport-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=kube-bind.appscode.com/v1alpha1 +$ helm upgrade -i kubebindappscodecom-apiserviceexport-editor appscode/kubebindappscodecom-apiserviceexport-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=kube-bind.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubebindappscodecom-apiserviceexport-editor appscode/kubebindappscodecom-apiserviceexport-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubebindappscodecom-apiserviceexport-editor appscode/kubebindappscodecom-apiserviceexport-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubebindappscodecom-apiserviceexportrequest-editor/Chart.yaml b/charts/kubebindappscodecom-apiserviceexportrequest-editor/Chart.yaml index 062c14a53c..0e1597f7ab 100644 --- a/charts/kubebindappscodecom-apiserviceexportrequest-editor/Chart.yaml +++ b/charts/kubebindappscodecom-apiserviceexportrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kube-bind.appscode.com","version":"v1alpha1","resource":"apiserviceexportrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: APIServiceExportRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kubebindappscodecom-apiserviceexportrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubebindappscodecom-apiserviceexportrequest-editor/README.md b/charts/kubebindappscodecom-apiserviceexportrequest-editor/README.md index 585422e843..b399f36b28 100644 --- a/charts/kubebindappscodecom-apiserviceexportrequest-editor/README.md +++ b/charts/kubebindappscodecom-apiserviceexportrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubebindappscodecom-apiserviceexportrequest-editor --version=v0.38.0 -$ helm upgrade -i kubebindappscodecom-apiserviceexportrequest-editor appscode/kubebindappscodecom-apiserviceexportrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubebindappscodecom-apiserviceexportrequest-editor --version=v0.39.0 +$ helm upgrade -i kubebindappscodecom-apiserviceexportrequest-editor appscode/kubebindappscodecom-apiserviceexportrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a APIServiceExportRequest Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `kubebindappscodecom-apiserviceexportrequest-editor`: ```bash -$ helm upgrade -i kubebindappscodecom-apiserviceexportrequest-editor appscode/kubebindappscodecom-apiserviceexportrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubebindappscodecom-apiserviceexportrequest-editor appscode/kubebindappscodecom-apiserviceexportrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a APIServiceExportRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kubebindappscodeco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubebindappscodecom-apiserviceexportrequest-editor appscode/kubebindappscodecom-apiserviceexportrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=kube-bind.appscode.com/v1alpha1 +$ helm upgrade -i kubebindappscodecom-apiserviceexportrequest-editor appscode/kubebindappscodecom-apiserviceexportrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=kube-bind.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubebindappscodecom-apiserviceexportrequest-editor appscode/kubebindappscodecom-apiserviceexportrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubebindappscodecom-apiserviceexportrequest-editor appscode/kubebindappscodecom-apiserviceexportrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubebindappscodecom-apiservicenamespace-editor/Chart.yaml b/charts/kubebindappscodecom-apiservicenamespace-editor/Chart.yaml index fc7939f1b5..5b5f660ec8 100644 --- a/charts/kubebindappscodecom-apiservicenamespace-editor/Chart.yaml +++ b/charts/kubebindappscodecom-apiservicenamespace-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kube-bind.appscode.com","version":"v1alpha1","resource":"apiservicenamespaces"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: APIServiceNamespace Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kubebindappscodecom-apiservicenamespace-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubebindappscodecom-apiservicenamespace-editor/README.md b/charts/kubebindappscodecom-apiservicenamespace-editor/README.md index 9b48738ad9..9b648e9b6f 100644 --- a/charts/kubebindappscodecom-apiservicenamespace-editor/README.md +++ b/charts/kubebindappscodecom-apiservicenamespace-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubebindappscodecom-apiservicenamespace-editor --version=v0.38.0 -$ helm upgrade -i kubebindappscodecom-apiservicenamespace-editor appscode/kubebindappscodecom-apiservicenamespace-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubebindappscodecom-apiservicenamespace-editor --version=v0.39.0 +$ helm upgrade -i kubebindappscodecom-apiservicenamespace-editor appscode/kubebindappscodecom-apiservicenamespace-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a APIServiceNamespace Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `kubebindappscodecom-apiservicenamespace-editor`: ```bash -$ helm upgrade -i kubebindappscodecom-apiservicenamespace-editor appscode/kubebindappscodecom-apiservicenamespace-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubebindappscodecom-apiservicenamespace-editor appscode/kubebindappscodecom-apiservicenamespace-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a APIServiceNamespace Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kubebindappscodeco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubebindappscodecom-apiservicenamespace-editor appscode/kubebindappscodecom-apiservicenamespace-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=kube-bind.appscode.com/v1alpha1 +$ helm upgrade -i kubebindappscodecom-apiservicenamespace-editor appscode/kubebindappscodecom-apiservicenamespace-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=kube-bind.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubebindappscodecom-apiservicenamespace-editor appscode/kubebindappscodecom-apiservicenamespace-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubebindappscodecom-apiservicenamespace-editor appscode/kubebindappscodecom-apiservicenamespace-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubebindappscodecom-clusterbinding-editor/Chart.yaml b/charts/kubebindappscodecom-clusterbinding-editor/Chart.yaml index d6ff94e6aa..9fffa420c5 100644 --- a/charts/kubebindappscodecom-clusterbinding-editor/Chart.yaml +++ b/charts/kubebindappscodecom-clusterbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kube-bind.appscode.com","version":"v1alpha1","resource":"clusterbindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kubebindappscodecom-clusterbinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubebindappscodecom-clusterbinding-editor/README.md b/charts/kubebindappscodecom-clusterbinding-editor/README.md index b1634ccfdb..b9a802d18d 100644 --- a/charts/kubebindappscodecom-clusterbinding-editor/README.md +++ b/charts/kubebindappscodecom-clusterbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubebindappscodecom-clusterbinding-editor --version=v0.38.0 -$ helm upgrade -i kubebindappscodecom-clusterbinding-editor appscode/kubebindappscodecom-clusterbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubebindappscodecom-clusterbinding-editor --version=v0.39.0 +$ helm upgrade -i kubebindappscodecom-clusterbinding-editor appscode/kubebindappscodecom-clusterbinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterBinding Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `kubebindappscodecom-clusterbinding-editor`: ```bash -$ helm upgrade -i kubebindappscodecom-clusterbinding-editor appscode/kubebindappscodecom-clusterbinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubebindappscodecom-clusterbinding-editor appscode/kubebindappscodecom-clusterbinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kubebindappscodeco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubebindappscodecom-clusterbinding-editor appscode/kubebindappscodecom-clusterbinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=kube-bind.appscode.com/v1alpha1 +$ helm upgrade -i kubebindappscodecom-clusterbinding-editor appscode/kubebindappscodecom-clusterbinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=kube-bind.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubebindappscodecom-clusterbinding-editor appscode/kubebindappscodecom-clusterbinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubebindappscodecom-clusterbinding-editor appscode/kubebindappscodecom-clusterbinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-aerospike-editor/Chart.yaml b/charts/kubedbcom-aerospike-editor/Chart.yaml index e883771b2e..39a97d01b9 100644 --- a/charts/kubedbcom-aerospike-editor/Chart.yaml +++ b/charts/kubedbcom-aerospike-editor/Chart.yaml @@ -5,7 +5,7 @@ annotations: \ autoscaling.kubedb.com\n kind: AerospikeAutoscaler\n version: v1alpha1\n-\ \ group: kubedb.com\n kind: Aerospike\n version: v1alpha2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Aerospike Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -17,4 +17,4 @@ maintainers: name: appscode name: kubedbcom-aerospike-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-aerospike-editor/README.md b/charts/kubedbcom-aerospike-editor/README.md index a8c62df94b..edad945333 100644 --- a/charts/kubedbcom-aerospike-editor/README.md +++ b/charts/kubedbcom-aerospike-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-aerospike-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-aerospike-editor appscode/kubedbcom-aerospike-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-aerospike-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-aerospike-editor appscode/kubedbcom-aerospike-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Aerospike Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `kubedbcom-aerospike-editor`: ```bash -$ helm upgrade -i kubedbcom-aerospike-editor appscode/kubedbcom-aerospike-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-aerospike-editor appscode/kubedbcom-aerospike-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Aerospike Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -62,12 +62,12 @@ The following table lists the configurable parameters of the `kubedbcom-aerospik Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-aerospike-editor appscode/kubedbcom-aerospike-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-aerospike-editor appscode/kubedbcom-aerospike-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-aerospike-editor appscode/kubedbcom-aerospike-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-aerospike-editor appscode/kubedbcom-aerospike-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-cassandra-editor-options/Chart.yaml b/charts/kubedbcom-cassandra-editor-options/Chart.yaml index 44e9b9fd38..bc28015fb8 100644 --- a/charts/kubedbcom-cassandra-editor-options/Chart.yaml +++ b/charts/kubedbcom-cassandra-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-cassandra-editor-options description: Cassandra Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-cassandra-editor-options/README.md b/charts/kubedbcom-cassandra-editor-options/README.md index 123d87d9d3..43b20a58ee 100644 --- a/charts/kubedbcom-cassandra-editor-options/README.md +++ b/charts/kubedbcom-cassandra-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-cassandra-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-cassandra-editor-options appscode/kubedbcom-cassandra-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-cassandra-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-cassandra-editor-options appscode/kubedbcom-cassandra-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Cassandra Editor UI Options on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `kubedbcom-cassandra-editor-options`: ```bash -$ helm upgrade -i kubedbcom-cassandra-editor-options appscode/kubedbcom-cassandra-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-cassandra-editor-options appscode/kubedbcom-cassandra-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Cassandra Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -194,12 +194,12 @@ The following table lists the configurable parameters of the `kubedbcom-cassandr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-cassandra-editor-options appscode/kubedbcom-cassandra-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-cassandra-editor-options appscode/kubedbcom-cassandra-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-cassandra-editor-options appscode/kubedbcom-cassandra-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-cassandra-editor-options appscode/kubedbcom-cassandra-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-cassandra-editor/Chart.yaml b/charts/kubedbcom-cassandra-editor/Chart.yaml index 9e67f5447a..4e7d597198 100644 --- a/charts/kubedbcom-cassandra-editor/Chart.yaml +++ b/charts/kubedbcom-cassandra-editor/Chart.yaml @@ -13,7 +13,7 @@ annotations: \ version: v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version:\ \ v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Cassandra Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -25,4 +25,4 @@ maintainers: name: appscode name: kubedbcom-cassandra-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-cassandra-editor/README.md b/charts/kubedbcom-cassandra-editor/README.md index 2d03a90e97..b7144e1cc4 100644 --- a/charts/kubedbcom-cassandra-editor/README.md +++ b/charts/kubedbcom-cassandra-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-cassandra-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-cassandra-editor appscode/kubedbcom-cassandra-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-cassandra-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-cassandra-editor appscode/kubedbcom-cassandra-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Cassandra Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `kubedbcom-cassandra-editor`: ```bash -$ helm upgrade -i kubedbcom-cassandra-editor appscode/kubedbcom-cassandra-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-cassandra-editor appscode/kubedbcom-cassandra-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Cassandra Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -108,12 +108,12 @@ The following table lists the configurable parameters of the `kubedbcom-cassandr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-cassandra-editor appscode/kubedbcom-cassandra-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-cassandra-editor appscode/kubedbcom-cassandra-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-cassandra-editor appscode/kubedbcom-cassandra-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-cassandra-editor appscode/kubedbcom-cassandra-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-clickhouse-editor-options/Chart.yaml b/charts/kubedbcom-clickhouse-editor-options/Chart.yaml index 07f14e031f..3514e2c93c 100644 --- a/charts/kubedbcom-clickhouse-editor-options/Chart.yaml +++ b/charts/kubedbcom-clickhouse-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-clickhouse-editor-options description: ClickHouse Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-clickhouse-editor-options/README.md b/charts/kubedbcom-clickhouse-editor-options/README.md index 84af848c6a..fce69bb8bf 100644 --- a/charts/kubedbcom-clickhouse-editor-options/README.md +++ b/charts/kubedbcom-clickhouse-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-clickhouse-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-clickhouse-editor-options appscode/kubedbcom-clickhouse-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-clickhouse-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-clickhouse-editor-options appscode/kubedbcom-clickhouse-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClickHouse Editor UI Options on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `kubedbcom-clickhouse-editor-options`: ```bash -$ helm upgrade -i kubedbcom-clickhouse-editor-options appscode/kubedbcom-clickhouse-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-clickhouse-editor-options appscode/kubedbcom-clickhouse-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a ClickHouse Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -233,12 +233,12 @@ The following table lists the configurable parameters of the `kubedbcom-clickhou Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-clickhouse-editor-options appscode/kubedbcom-clickhouse-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-clickhouse-editor-options appscode/kubedbcom-clickhouse-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-clickhouse-editor-options appscode/kubedbcom-clickhouse-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-clickhouse-editor-options appscode/kubedbcom-clickhouse-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-clickhouse-editor/Chart.yaml b/charts/kubedbcom-clickhouse-editor/Chart.yaml index 0a174909ec..9df92ad839 100644 --- a/charts/kubedbcom-clickhouse-editor/Chart.yaml +++ b/charts/kubedbcom-clickhouse-editor/Chart.yaml @@ -13,7 +13,7 @@ annotations: \ version: v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version:\ \ v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClickHouse Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -25,4 +25,4 @@ maintainers: name: appscode name: kubedbcom-clickhouse-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-clickhouse-editor/README.md b/charts/kubedbcom-clickhouse-editor/README.md index 376f855ee1..571bd2dbd5 100644 --- a/charts/kubedbcom-clickhouse-editor/README.md +++ b/charts/kubedbcom-clickhouse-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-clickhouse-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-clickhouse-editor appscode/kubedbcom-clickhouse-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-clickhouse-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-clickhouse-editor appscode/kubedbcom-clickhouse-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClickHouse Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `kubedbcom-clickhouse-editor`: ```bash -$ helm upgrade -i kubedbcom-clickhouse-editor appscode/kubedbcom-clickhouse-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-clickhouse-editor appscode/kubedbcom-clickhouse-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClickHouse Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -146,12 +146,12 @@ The following table lists the configurable parameters of the `kubedbcom-clickhou Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-clickhouse-editor appscode/kubedbcom-clickhouse-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-clickhouse-editor appscode/kubedbcom-clickhouse-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-clickhouse-editor appscode/kubedbcom-clickhouse-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-clickhouse-editor appscode/kubedbcom-clickhouse-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-db2-editor-options/Chart.yaml b/charts/kubedbcom-db2-editor-options/Chart.yaml index 25d410d11e..b26b829020 100644 --- a/charts/kubedbcom-db2-editor-options/Chart.yaml +++ b/charts/kubedbcom-db2-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-db2-editor-options description: DB2 Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-db2-editor-options/README.md b/charts/kubedbcom-db2-editor-options/README.md index dc9ae28981..88d94759ce 100644 --- a/charts/kubedbcom-db2-editor-options/README.md +++ b/charts/kubedbcom-db2-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-db2-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-db2-editor-options appscode/kubedbcom-db2-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-db2-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-db2-editor-options appscode/kubedbcom-db2-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DB2 Editor UI Options on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `kubedbcom-db2-editor-options`: ```bash -$ helm upgrade -i kubedbcom-db2-editor-options appscode/kubedbcom-db2-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-db2-editor-options appscode/kubedbcom-db2-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a DB2 Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -147,12 +147,12 @@ The following table lists the configurable parameters of the `kubedbcom-db2-edit Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-db2-editor-options appscode/kubedbcom-db2-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-db2-editor-options appscode/kubedbcom-db2-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-db2-editor-options appscode/kubedbcom-db2-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-db2-editor-options appscode/kubedbcom-db2-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-db2-editor/Chart.yaml b/charts/kubedbcom-db2-editor/Chart.yaml index 9618a27ae6..b360eeb225 100644 --- a/charts/kubedbcom-db2-editor/Chart.yaml +++ b/charts/kubedbcom-db2-editor/Chart.yaml @@ -5,7 +5,7 @@ annotations: \ autoscaling.kubedb.com\n kind: DB2Autoscaler\n version: v1alpha1\n- group:\ \ kubedb.com\n kind: DB2\n version: v1alpha2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DB2 Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -17,4 +17,4 @@ maintainers: name: appscode name: kubedbcom-db2-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-db2-editor/README.md b/charts/kubedbcom-db2-editor/README.md index 5ad31f4245..716d834fa7 100644 --- a/charts/kubedbcom-db2-editor/README.md +++ b/charts/kubedbcom-db2-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-db2-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-db2-editor appscode/kubedbcom-db2-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-db2-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-db2-editor appscode/kubedbcom-db2-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DB2 Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `kubedbcom-db2-editor`: ```bash -$ helm upgrade -i kubedbcom-db2-editor appscode/kubedbcom-db2-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-db2-editor appscode/kubedbcom-db2-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DB2 Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -62,12 +62,12 @@ The following table lists the configurable parameters of the `kubedbcom-db2-edit Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-db2-editor appscode/kubedbcom-db2-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-db2-editor appscode/kubedbcom-db2-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-db2-editor appscode/kubedbcom-db2-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-db2-editor appscode/kubedbcom-db2-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-documentdb-editor-options/Chart.yaml b/charts/kubedbcom-documentdb-editor-options/Chart.yaml index 19a7af4b32..2aa3df0791 100644 --- a/charts/kubedbcom-documentdb-editor-options/Chart.yaml +++ b/charts/kubedbcom-documentdb-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-documentdb-editor-options description: DocumentDB Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-documentdb-editor-options/README.md b/charts/kubedbcom-documentdb-editor-options/README.md index a1d173711b..ff901af51e 100644 --- a/charts/kubedbcom-documentdb-editor-options/README.md +++ b/charts/kubedbcom-documentdb-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-documentdb-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-documentdb-editor-options appscode/kubedbcom-documentdb-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-documentdb-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-documentdb-editor-options appscode/kubedbcom-documentdb-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DocumentDB Editor UI Options on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `kubedbcom-documentdb-editor-options`: ```bash -$ helm upgrade -i kubedbcom-documentdb-editor-options appscode/kubedbcom-documentdb-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-documentdb-editor-options appscode/kubedbcom-documentdb-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a DocumentDB Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -147,12 +147,12 @@ The following table lists the configurable parameters of the `kubedbcom-document Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-documentdb-editor-options appscode/kubedbcom-documentdb-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-documentdb-editor-options appscode/kubedbcom-documentdb-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-documentdb-editor-options appscode/kubedbcom-documentdb-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-documentdb-editor-options appscode/kubedbcom-documentdb-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-documentdb-editor/Chart.yaml b/charts/kubedbcom-documentdb-editor/Chart.yaml index c8a0cf2e61..30348e49f4 100644 --- a/charts/kubedbcom-documentdb-editor/Chart.yaml +++ b/charts/kubedbcom-documentdb-editor/Chart.yaml @@ -5,7 +5,7 @@ annotations: \ autoscaling.kubedb.com\n kind: DocumentDBAutoscaler\n version: v1alpha1\n\ - group: kubedb.com\n kind: DocumentDB\n version: v1alpha2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DocumentDB Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -17,4 +17,4 @@ maintainers: name: appscode name: kubedbcom-documentdb-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-documentdb-editor/README.md b/charts/kubedbcom-documentdb-editor/README.md index 9de36b190c..6f742dbd5a 100644 --- a/charts/kubedbcom-documentdb-editor/README.md +++ b/charts/kubedbcom-documentdb-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-documentdb-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-documentdb-editor appscode/kubedbcom-documentdb-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-documentdb-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-documentdb-editor appscode/kubedbcom-documentdb-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DocumentDB Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `kubedbcom-documentdb-editor`: ```bash -$ helm upgrade -i kubedbcom-documentdb-editor appscode/kubedbcom-documentdb-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-documentdb-editor appscode/kubedbcom-documentdb-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DocumentDB Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -62,12 +62,12 @@ The following table lists the configurable parameters of the `kubedbcom-document Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-documentdb-editor appscode/kubedbcom-documentdb-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-documentdb-editor appscode/kubedbcom-documentdb-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-documentdb-editor appscode/kubedbcom-documentdb-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-documentdb-editor appscode/kubedbcom-documentdb-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-druid-editor-options/Chart.yaml b/charts/kubedbcom-druid-editor-options/Chart.yaml index d81486d45f..4546005314 100644 --- a/charts/kubedbcom-druid-editor-options/Chart.yaml +++ b/charts/kubedbcom-druid-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-druid-editor-options description: Druid Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-druid-editor-options/README.md b/charts/kubedbcom-druid-editor-options/README.md index 7f727d8e4b..f3b2a32ca8 100644 --- a/charts/kubedbcom-druid-editor-options/README.md +++ b/charts/kubedbcom-druid-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-druid-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-druid-editor-options appscode/kubedbcom-druid-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-druid-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-druid-editor-options appscode/kubedbcom-druid-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Druid Editor UI Options on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `kubedbcom-druid-editor-options`: ```bash -$ helm upgrade -i kubedbcom-druid-editor-options appscode/kubedbcom-druid-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-druid-editor-options appscode/kubedbcom-druid-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Druid Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -226,12 +226,12 @@ The following table lists the configurable parameters of the `kubedbcom-druid-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-druid-editor-options appscode/kubedbcom-druid-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-druid-editor-options appscode/kubedbcom-druid-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-druid-editor-options appscode/kubedbcom-druid-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-druid-editor-options appscode/kubedbcom-druid-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-druid-editor/Chart.yaml b/charts/kubedbcom-druid-editor/Chart.yaml index bd15e3dca1..2ca13fc73d 100644 --- a/charts/kubedbcom-druid-editor/Chart.yaml +++ b/charts/kubedbcom-druid-editor/Chart.yaml @@ -13,7 +13,7 @@ annotations: \ kind: PrometheusRule\n version: v1\n- group: monitoring.coreos.com\n kind:\ \ ServiceMonitor\n version: v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Druid Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -25,4 +25,4 @@ maintainers: name: appscode name: kubedbcom-druid-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-druid-editor/README.md b/charts/kubedbcom-druid-editor/README.md index 63a9b91d4d..343834276e 100644 --- a/charts/kubedbcom-druid-editor/README.md +++ b/charts/kubedbcom-druid-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-druid-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-druid-editor appscode/kubedbcom-druid-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-druid-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-druid-editor appscode/kubedbcom-druid-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Druid Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `kubedbcom-druid-editor`: ```bash -$ helm upgrade -i kubedbcom-druid-editor appscode/kubedbcom-druid-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-druid-editor appscode/kubedbcom-druid-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Druid Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -120,12 +120,12 @@ The following table lists the configurable parameters of the `kubedbcom-druid-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-druid-editor appscode/kubedbcom-druid-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-druid-editor appscode/kubedbcom-druid-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-druid-editor appscode/kubedbcom-druid-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-druid-editor appscode/kubedbcom-druid-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-elasticsearch-editor-options/Chart.yaml b/charts/kubedbcom-elasticsearch-editor-options/Chart.yaml index 7c12f42241..bfedfe1890 100644 --- a/charts/kubedbcom-elasticsearch-editor-options/Chart.yaml +++ b/charts/kubedbcom-elasticsearch-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-elasticsearch-editor-options description: Elasticsearch Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-elasticsearch-editor-options/README.md b/charts/kubedbcom-elasticsearch-editor-options/README.md index a04525950c..07624791d5 100644 --- a/charts/kubedbcom-elasticsearch-editor-options/README.md +++ b/charts/kubedbcom-elasticsearch-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-elasticsearch-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-elasticsearch-editor-options appscode/kubedbcom-elasticsearch-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-elasticsearch-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-elasticsearch-editor-options appscode/kubedbcom-elasticsearch-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Elasticsearch Editor UI Options on a [Kubernetes](http://ku To install/upgrade the chart with the release name `kubedbcom-elasticsearch-editor-options`: ```bash -$ helm upgrade -i kubedbcom-elasticsearch-editor-options appscode/kubedbcom-elasticsearch-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-elasticsearch-editor-options appscode/kubedbcom-elasticsearch-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Elasticsearch Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -291,12 +291,12 @@ The following table lists the configurable parameters of the `kubedbcom-elastics Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-elasticsearch-editor-options appscode/kubedbcom-elasticsearch-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-elasticsearch-editor-options appscode/kubedbcom-elasticsearch-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-elasticsearch-editor-options appscode/kubedbcom-elasticsearch-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-elasticsearch-editor-options appscode/kubedbcom-elasticsearch-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-elasticsearch-editor/Chart.yaml b/charts/kubedbcom-elasticsearch-editor/Chart.yaml index a504657e44..2fef038b35 100644 --- a/charts/kubedbcom-elasticsearch-editor/Chart.yaml +++ b/charts/kubedbcom-elasticsearch-editor/Chart.yaml @@ -16,7 +16,7 @@ annotations: - group: stash.appscode.com\n kind: Repository\n version: v1alpha1\n- group:\ \ stash.appscode.com\n kind: RestoreSession\n version: v1beta1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Elasticsearch Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -28,4 +28,4 @@ maintainers: name: appscode name: kubedbcom-elasticsearch-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-elasticsearch-editor/README.md b/charts/kubedbcom-elasticsearch-editor/README.md index 19b751583a..69cb4991d6 100644 --- a/charts/kubedbcom-elasticsearch-editor/README.md +++ b/charts/kubedbcom-elasticsearch-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-elasticsearch-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-elasticsearch-editor appscode/kubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-elasticsearch-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-elasticsearch-editor appscode/kubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Elasticsearch Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `kubedbcom-elasticsearch-editor`: ```bash -$ helm upgrade -i kubedbcom-elasticsearch-editor appscode/kubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-elasticsearch-editor appscode/kubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Elasticsearch Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -212,12 +212,12 @@ The following table lists the configurable parameters of the `kubedbcom-elastics Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-elasticsearch-editor appscode/kubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-elasticsearch-editor appscode/kubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-elasticsearch-editor appscode/kubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-elasticsearch-editor appscode/kubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-etcd-editor/Chart.yaml b/charts/kubedbcom-etcd-editor/Chart.yaml index 2b88ffe624..058baa8a42 100644 --- a/charts/kubedbcom-etcd-editor/Chart.yaml +++ b/charts/kubedbcom-etcd-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1alpha2","resource":"etcds"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Etcd Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kubedbcom-etcd-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-etcd-editor/README.md b/charts/kubedbcom-etcd-editor/README.md index 18d636a03b..91f748c7a1 100644 --- a/charts/kubedbcom-etcd-editor/README.md +++ b/charts/kubedbcom-etcd-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-etcd-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-etcd-editor appscode/kubedbcom-etcd-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-etcd-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-etcd-editor appscode/kubedbcom-etcd-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Etcd Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `kubedbcom-etcd-editor`: ```bash -$ helm upgrade -i kubedbcom-etcd-editor appscode/kubedbcom-etcd-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-etcd-editor appscode/kubedbcom-etcd-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Etcd Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kubedbcom-etcd-edi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-etcd-editor appscode/kubedbcom-etcd-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=kubedb.com/v1alpha2 +$ helm upgrade -i kubedbcom-etcd-editor appscode/kubedbcom-etcd-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=kubedb.com/v1alpha2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-etcd-editor appscode/kubedbcom-etcd-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-etcd-editor appscode/kubedbcom-etcd-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-hanadb-editor-options/Chart.yaml b/charts/kubedbcom-hanadb-editor-options/Chart.yaml index eba892fffe..aad413b2b6 100644 --- a/charts/kubedbcom-hanadb-editor-options/Chart.yaml +++ b/charts/kubedbcom-hanadb-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-hanadb-editor-options description: HanaDB Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-hanadb-editor-options/README.md b/charts/kubedbcom-hanadb-editor-options/README.md index f3d468ca81..d2472c7d9c 100644 --- a/charts/kubedbcom-hanadb-editor-options/README.md +++ b/charts/kubedbcom-hanadb-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-hanadb-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-hanadb-editor-options appscode/kubedbcom-hanadb-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-hanadb-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-hanadb-editor-options appscode/kubedbcom-hanadb-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HanaDB Editor UI Options on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `kubedbcom-hanadb-editor-options`: ```bash -$ helm upgrade -i kubedbcom-hanadb-editor-options appscode/kubedbcom-hanadb-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-hanadb-editor-options appscode/kubedbcom-hanadb-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a HanaDB Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -190,12 +190,12 @@ The following table lists the configurable parameters of the `kubedbcom-hanadb-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-hanadb-editor-options appscode/kubedbcom-hanadb-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-hanadb-editor-options appscode/kubedbcom-hanadb-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-hanadb-editor-options appscode/kubedbcom-hanadb-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-hanadb-editor-options appscode/kubedbcom-hanadb-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-hanadb-editor/Chart.yaml b/charts/kubedbcom-hanadb-editor/Chart.yaml index 57e103cc1b..0ac97ac3ae 100644 --- a/charts/kubedbcom-hanadb-editor/Chart.yaml +++ b/charts/kubedbcom-hanadb-editor/Chart.yaml @@ -8,7 +8,7 @@ annotations: \ kind: PrometheusRule\n version: v1\n- group: monitoring.coreos.com\n kind:\ \ ServiceMonitor\n version: v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: HanaDB Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -20,4 +20,4 @@ maintainers: name: appscode name: kubedbcom-hanadb-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-hanadb-editor/README.md b/charts/kubedbcom-hanadb-editor/README.md index 5916029487..de43fa5e33 100644 --- a/charts/kubedbcom-hanadb-editor/README.md +++ b/charts/kubedbcom-hanadb-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-hanadb-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-hanadb-editor appscode/kubedbcom-hanadb-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-hanadb-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-hanadb-editor appscode/kubedbcom-hanadb-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HanaDB Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `kubedbcom-hanadb-editor`: ```bash -$ helm upgrade -i kubedbcom-hanadb-editor appscode/kubedbcom-hanadb-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-hanadb-editor appscode/kubedbcom-hanadb-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a HanaDB Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -105,12 +105,12 @@ The following table lists the configurable parameters of the `kubedbcom-hanadb-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-hanadb-editor appscode/kubedbcom-hanadb-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-hanadb-editor appscode/kubedbcom-hanadb-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-hanadb-editor appscode/kubedbcom-hanadb-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-hanadb-editor appscode/kubedbcom-hanadb-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-hazelcast-editor-options/Chart.yaml b/charts/kubedbcom-hazelcast-editor-options/Chart.yaml index c08204861b..71c457d01a 100644 --- a/charts/kubedbcom-hazelcast-editor-options/Chart.yaml +++ b/charts/kubedbcom-hazelcast-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-hazelcast-editor-options description: Hazelcast Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-hazelcast-editor-options/README.md b/charts/kubedbcom-hazelcast-editor-options/README.md index 7a5886fc81..7ff18a9b69 100644 --- a/charts/kubedbcom-hazelcast-editor-options/README.md +++ b/charts/kubedbcom-hazelcast-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-hazelcast-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-hazelcast-editor-options appscode/kubedbcom-hazelcast-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-hazelcast-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-hazelcast-editor-options appscode/kubedbcom-hazelcast-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Hazelcast Editor UI Options on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `kubedbcom-hazelcast-editor-options`: ```bash -$ helm upgrade -i kubedbcom-hazelcast-editor-options appscode/kubedbcom-hazelcast-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-hazelcast-editor-options appscode/kubedbcom-hazelcast-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Hazelcast Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -207,12 +207,12 @@ The following table lists the configurable parameters of the `kubedbcom-hazelcas Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-hazelcast-editor-options appscode/kubedbcom-hazelcast-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-hazelcast-editor-options appscode/kubedbcom-hazelcast-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-hazelcast-editor-options appscode/kubedbcom-hazelcast-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-hazelcast-editor-options appscode/kubedbcom-hazelcast-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-hazelcast-editor/Chart.yaml b/charts/kubedbcom-hazelcast-editor/Chart.yaml index e1922110f5..9081943db2 100644 --- a/charts/kubedbcom-hazelcast-editor/Chart.yaml +++ b/charts/kubedbcom-hazelcast-editor/Chart.yaml @@ -10,7 +10,7 @@ annotations: \ PrometheusRule\n version: v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n\ \ version: v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Hazelcast Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -22,4 +22,4 @@ maintainers: name: appscode name: kubedbcom-hazelcast-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-hazelcast-editor/README.md b/charts/kubedbcom-hazelcast-editor/README.md index 38059ea1e4..91d989b52e 100644 --- a/charts/kubedbcom-hazelcast-editor/README.md +++ b/charts/kubedbcom-hazelcast-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-hazelcast-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-hazelcast-editor appscode/kubedbcom-hazelcast-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-hazelcast-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-hazelcast-editor appscode/kubedbcom-hazelcast-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Hazelcast Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `kubedbcom-hazelcast-editor`: ```bash -$ helm upgrade -i kubedbcom-hazelcast-editor appscode/kubedbcom-hazelcast-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-hazelcast-editor appscode/kubedbcom-hazelcast-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Hazelcast Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -126,12 +126,12 @@ The following table lists the configurable parameters of the `kubedbcom-hazelcas Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-hazelcast-editor appscode/kubedbcom-hazelcast-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-hazelcast-editor appscode/kubedbcom-hazelcast-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-hazelcast-editor appscode/kubedbcom-hazelcast-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-hazelcast-editor appscode/kubedbcom-hazelcast-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-ignite-editor-options/Chart.yaml b/charts/kubedbcom-ignite-editor-options/Chart.yaml index c7016dbcfc..b4f1960d16 100644 --- a/charts/kubedbcom-ignite-editor-options/Chart.yaml +++ b/charts/kubedbcom-ignite-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-ignite-editor-options description: Ignite Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-ignite-editor-options/README.md b/charts/kubedbcom-ignite-editor-options/README.md index 2fa7559f9b..041fdd1df7 100644 --- a/charts/kubedbcom-ignite-editor-options/README.md +++ b/charts/kubedbcom-ignite-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-ignite-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-ignite-editor-options appscode/kubedbcom-ignite-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-ignite-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-ignite-editor-options appscode/kubedbcom-ignite-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Ignite Editor UI Options on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `kubedbcom-ignite-editor-options`: ```bash -$ helm upgrade -i kubedbcom-ignite-editor-options appscode/kubedbcom-ignite-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-ignite-editor-options appscode/kubedbcom-ignite-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Ignite Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -206,12 +206,12 @@ The following table lists the configurable parameters of the `kubedbcom-ignite-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-ignite-editor-options appscode/kubedbcom-ignite-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-ignite-editor-options appscode/kubedbcom-ignite-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-ignite-editor-options appscode/kubedbcom-ignite-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-ignite-editor-options appscode/kubedbcom-ignite-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-ignite-editor/Chart.yaml b/charts/kubedbcom-ignite-editor/Chart.yaml index 138669b4d7..3e8853af50 100644 --- a/charts/kubedbcom-ignite-editor/Chart.yaml +++ b/charts/kubedbcom-ignite-editor/Chart.yaml @@ -9,7 +9,7 @@ annotations: \ version: v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version:\ \ v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Ignite Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -21,4 +21,4 @@ maintainers: name: appscode name: kubedbcom-ignite-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-ignite-editor/README.md b/charts/kubedbcom-ignite-editor/README.md index fbd8a1bb01..2f80daec8c 100644 --- a/charts/kubedbcom-ignite-editor/README.md +++ b/charts/kubedbcom-ignite-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-ignite-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-ignite-editor appscode/kubedbcom-ignite-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-ignite-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-ignite-editor appscode/kubedbcom-ignite-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Ignite Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `kubedbcom-ignite-editor`: ```bash -$ helm upgrade -i kubedbcom-ignite-editor appscode/kubedbcom-ignite-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-ignite-editor appscode/kubedbcom-ignite-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Ignite Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -125,12 +125,12 @@ The following table lists the configurable parameters of the `kubedbcom-ignite-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-ignite-editor appscode/kubedbcom-ignite-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-ignite-editor appscode/kubedbcom-ignite-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-ignite-editor appscode/kubedbcom-ignite-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-ignite-editor appscode/kubedbcom-ignite-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-kafka-editor-options/Chart.yaml b/charts/kubedbcom-kafka-editor-options/Chart.yaml index 080aa06ee0..ba54fd4c06 100644 --- a/charts/kubedbcom-kafka-editor-options/Chart.yaml +++ b/charts/kubedbcom-kafka-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-kafka-editor-options description: Kafka Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-kafka-editor-options/README.md b/charts/kubedbcom-kafka-editor-options/README.md index 7303558210..9cdb021bd4 100644 --- a/charts/kubedbcom-kafka-editor-options/README.md +++ b/charts/kubedbcom-kafka-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-kafka-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-kafka-editor-options appscode/kubedbcom-kafka-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-kafka-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-kafka-editor-options appscode/kubedbcom-kafka-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Kafka Editor UI Options on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `kubedbcom-kafka-editor-options`: ```bash -$ helm upgrade -i kubedbcom-kafka-editor-options appscode/kubedbcom-kafka-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-kafka-editor-options appscode/kubedbcom-kafka-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Kafka Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -240,12 +240,12 @@ The following table lists the configurable parameters of the `kubedbcom-kafka-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-kafka-editor-options appscode/kubedbcom-kafka-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-kafka-editor-options appscode/kubedbcom-kafka-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-kafka-editor-options appscode/kubedbcom-kafka-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-kafka-editor-options appscode/kubedbcom-kafka-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-kafka-editor/Chart.yaml b/charts/kubedbcom-kafka-editor/Chart.yaml index ecab29f0f5..46e9db1818 100644 --- a/charts/kubedbcom-kafka-editor/Chart.yaml +++ b/charts/kubedbcom-kafka-editor/Chart.yaml @@ -9,7 +9,7 @@ annotations: \ v1\n- group: monitoring.coreos.com\n kind: PrometheusRule\n version: v1\n\ - group: monitoring.coreos.com\n kind: ServiceMonitor\n version: v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Kafka Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -21,4 +21,4 @@ maintainers: name: appscode name: kubedbcom-kafka-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-kafka-editor/README.md b/charts/kubedbcom-kafka-editor/README.md index e419971f6d..d5dfc8346d 100644 --- a/charts/kubedbcom-kafka-editor/README.md +++ b/charts/kubedbcom-kafka-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-kafka-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-kafka-editor appscode/kubedbcom-kafka-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-kafka-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-kafka-editor appscode/kubedbcom-kafka-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Kafka Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `kubedbcom-kafka-editor`: ```bash -$ helm upgrade -i kubedbcom-kafka-editor appscode/kubedbcom-kafka-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-kafka-editor appscode/kubedbcom-kafka-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Kafka Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -149,12 +149,12 @@ The following table lists the configurable parameters of the `kubedbcom-kafka-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-kafka-editor appscode/kubedbcom-kafka-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-kafka-editor appscode/kubedbcom-kafka-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-kafka-editor appscode/kubedbcom-kafka-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-kafka-editor appscode/kubedbcom-kafka-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-mariadb-editor-options/Chart.yaml b/charts/kubedbcom-mariadb-editor-options/Chart.yaml index b4ad838724..35ce8fa1a2 100644 --- a/charts/kubedbcom-mariadb-editor-options/Chart.yaml +++ b/charts/kubedbcom-mariadb-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-mariadb-editor-options description: MariaDB Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-mariadb-editor-options/README.md b/charts/kubedbcom-mariadb-editor-options/README.md index b8814eeac5..d8ba4b4df4 100644 --- a/charts/kubedbcom-mariadb-editor-options/README.md +++ b/charts/kubedbcom-mariadb-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-mariadb-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-mariadb-editor-options appscode/kubedbcom-mariadb-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-mariadb-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-mariadb-editor-options appscode/kubedbcom-mariadb-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDB Editor UI Options on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `kubedbcom-mariadb-editor-options`: ```bash -$ helm upgrade -i kubedbcom-mariadb-editor-options appscode/kubedbcom-mariadb-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-mariadb-editor-options appscode/kubedbcom-mariadb-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a MariaDB Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -304,12 +304,12 @@ The following table lists the configurable parameters of the `kubedbcom-mariadb- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-mariadb-editor-options appscode/kubedbcom-mariadb-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-mariadb-editor-options appscode/kubedbcom-mariadb-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-mariadb-editor-options appscode/kubedbcom-mariadb-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-mariadb-editor-options appscode/kubedbcom-mariadb-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-mariadb-editor/Chart.yaml b/charts/kubedbcom-mariadb-editor/Chart.yaml index b3a8679852..a27c2c7868 100644 --- a/charts/kubedbcom-mariadb-editor/Chart.yaml +++ b/charts/kubedbcom-mariadb-editor/Chart.yaml @@ -16,7 +16,7 @@ annotations: \ stash.appscode.com\n kind: Repository\n version: v1alpha1\n- group: stash.appscode.com\n\ \ kind: RestoreSession\n version: v1beta1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MariaDB Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -28,4 +28,4 @@ maintainers: name: appscode name: kubedbcom-mariadb-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-mariadb-editor/README.md b/charts/kubedbcom-mariadb-editor/README.md index f13d1dde46..c6373c299e 100644 --- a/charts/kubedbcom-mariadb-editor/README.md +++ b/charts/kubedbcom-mariadb-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-mariadb-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-mariadb-editor appscode/kubedbcom-mariadb-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-mariadb-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-mariadb-editor appscode/kubedbcom-mariadb-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDB Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `kubedbcom-mariadb-editor`: ```bash -$ helm upgrade -i kubedbcom-mariadb-editor appscode/kubedbcom-mariadb-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-mariadb-editor appscode/kubedbcom-mariadb-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MariaDB Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -221,12 +221,12 @@ The following table lists the configurable parameters of the `kubedbcom-mariadb- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-mariadb-editor appscode/kubedbcom-mariadb-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-mariadb-editor appscode/kubedbcom-mariadb-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-mariadb-editor appscode/kubedbcom-mariadb-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-mariadb-editor appscode/kubedbcom-mariadb-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-memcached-editor-options/Chart.yaml b/charts/kubedbcom-memcached-editor-options/Chart.yaml index ab30ea8982..f49ab690ac 100644 --- a/charts/kubedbcom-memcached-editor-options/Chart.yaml +++ b/charts/kubedbcom-memcached-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-memcached-editor-options description: Memcached Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-memcached-editor-options/README.md b/charts/kubedbcom-memcached-editor-options/README.md index eab4923141..eb0b825e23 100644 --- a/charts/kubedbcom-memcached-editor-options/README.md +++ b/charts/kubedbcom-memcached-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-memcached-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-memcached-editor-options appscode/kubedbcom-memcached-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-memcached-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-memcached-editor-options appscode/kubedbcom-memcached-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Memcached Editor UI Options on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `kubedbcom-memcached-editor-options`: ```bash -$ helm upgrade -i kubedbcom-memcached-editor-options appscode/kubedbcom-memcached-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-memcached-editor-options appscode/kubedbcom-memcached-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Memcached Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -192,12 +192,12 @@ The following table lists the configurable parameters of the `kubedbcom-memcache Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-memcached-editor-options appscode/kubedbcom-memcached-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-memcached-editor-options appscode/kubedbcom-memcached-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-memcached-editor-options appscode/kubedbcom-memcached-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-memcached-editor-options appscode/kubedbcom-memcached-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-memcached-editor/Chart.yaml b/charts/kubedbcom-memcached-editor/Chart.yaml index 82e071fbba..a5202b2d84 100644 --- a/charts/kubedbcom-memcached-editor/Chart.yaml +++ b/charts/kubedbcom-memcached-editor/Chart.yaml @@ -10,7 +10,7 @@ annotations: \ version: v1\n- group: monitoring.coreos.com\n kind: PrometheusRule\n version:\ \ v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version: v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Memcached Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -22,4 +22,4 @@ maintainers: name: appscode name: kubedbcom-memcached-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-memcached-editor/README.md b/charts/kubedbcom-memcached-editor/README.md index 8ec61a8a8f..bfefab9a77 100644 --- a/charts/kubedbcom-memcached-editor/README.md +++ b/charts/kubedbcom-memcached-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-memcached-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-memcached-editor appscode/kubedbcom-memcached-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-memcached-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-memcached-editor appscode/kubedbcom-memcached-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Memcached Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `kubedbcom-memcached-editor`: ```bash -$ helm upgrade -i kubedbcom-memcached-editor appscode/kubedbcom-memcached-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-memcached-editor appscode/kubedbcom-memcached-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Memcached Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -114,12 +114,12 @@ The following table lists the configurable parameters of the `kubedbcom-memcache Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-memcached-editor appscode/kubedbcom-memcached-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-memcached-editor appscode/kubedbcom-memcached-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-memcached-editor appscode/kubedbcom-memcached-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-memcached-editor appscode/kubedbcom-memcached-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-milvus-editor-options/Chart.yaml b/charts/kubedbcom-milvus-editor-options/Chart.yaml index b908ba240d..16665fac5a 100644 --- a/charts/kubedbcom-milvus-editor-options/Chart.yaml +++ b/charts/kubedbcom-milvus-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-milvus-editor-options description: Milvus Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-milvus-editor-options/README.md b/charts/kubedbcom-milvus-editor-options/README.md index d632decec5..d7da7a28e2 100644 --- a/charts/kubedbcom-milvus-editor-options/README.md +++ b/charts/kubedbcom-milvus-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-milvus-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-milvus-editor-options appscode/kubedbcom-milvus-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-milvus-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-milvus-editor-options appscode/kubedbcom-milvus-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Milvus Editor UI Options on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `kubedbcom-milvus-editor-options`: ```bash -$ helm upgrade -i kubedbcom-milvus-editor-options appscode/kubedbcom-milvus-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-milvus-editor-options appscode/kubedbcom-milvus-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Milvus Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -229,12 +229,12 @@ The following table lists the configurable parameters of the `kubedbcom-milvus-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-milvus-editor-options appscode/kubedbcom-milvus-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-milvus-editor-options appscode/kubedbcom-milvus-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-milvus-editor-options appscode/kubedbcom-milvus-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-milvus-editor-options appscode/kubedbcom-milvus-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-milvus-editor/Chart.yaml b/charts/kubedbcom-milvus-editor/Chart.yaml index 5f890cb178..7f843275f8 100644 --- a/charts/kubedbcom-milvus-editor/Chart.yaml +++ b/charts/kubedbcom-milvus-editor/Chart.yaml @@ -12,7 +12,7 @@ annotations: \ monitoring.coreos.com\n kind: PrometheusRule\n version: v1\n- group: monitoring.coreos.com\n\ \ kind: ServiceMonitor\n version: v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Milvus Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -24,4 +24,4 @@ maintainers: name: appscode name: kubedbcom-milvus-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-milvus-editor/README.md b/charts/kubedbcom-milvus-editor/README.md index 3cedf3bac1..898f19c36e 100644 --- a/charts/kubedbcom-milvus-editor/README.md +++ b/charts/kubedbcom-milvus-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-milvus-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-milvus-editor appscode/kubedbcom-milvus-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-milvus-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-milvus-editor appscode/kubedbcom-milvus-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Milvus Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `kubedbcom-milvus-editor`: ```bash -$ helm upgrade -i kubedbcom-milvus-editor appscode/kubedbcom-milvus-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-milvus-editor appscode/kubedbcom-milvus-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Milvus Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -146,12 +146,12 @@ The following table lists the configurable parameters of the `kubedbcom-milvus-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-milvus-editor appscode/kubedbcom-milvus-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-milvus-editor appscode/kubedbcom-milvus-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-milvus-editor appscode/kubedbcom-milvus-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-milvus-editor appscode/kubedbcom-milvus-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-mongodb-editor-options/Chart.yaml b/charts/kubedbcom-mongodb-editor-options/Chart.yaml index 503c20e42a..964a0d77ee 100644 --- a/charts/kubedbcom-mongodb-editor-options/Chart.yaml +++ b/charts/kubedbcom-mongodb-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-mongodb-editor-options description: MongoDB Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-mongodb-editor-options/README.md b/charts/kubedbcom-mongodb-editor-options/README.md index 038456fc8e..263340a0e8 100644 --- a/charts/kubedbcom-mongodb-editor-options/README.md +++ b/charts/kubedbcom-mongodb-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-mongodb-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-mongodb-editor-options appscode/kubedbcom-mongodb-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-mongodb-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-mongodb-editor-options appscode/kubedbcom-mongodb-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDB Editor UI Options on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `kubedbcom-mongodb-editor-options`: ```bash -$ helm upgrade -i kubedbcom-mongodb-editor-options appscode/kubedbcom-mongodb-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-mongodb-editor-options appscode/kubedbcom-mongodb-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a MongoDB Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -323,12 +323,12 @@ The following table lists the configurable parameters of the `kubedbcom-mongodb- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-mongodb-editor-options appscode/kubedbcom-mongodb-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-mongodb-editor-options appscode/kubedbcom-mongodb-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-mongodb-editor-options appscode/kubedbcom-mongodb-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-mongodb-editor-options appscode/kubedbcom-mongodb-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-mongodb-editor/Chart.yaml b/charts/kubedbcom-mongodb-editor/Chart.yaml index 332ba20dcd..963478f638 100644 --- a/charts/kubedbcom-mongodb-editor/Chart.yaml +++ b/charts/kubedbcom-mongodb-editor/Chart.yaml @@ -16,7 +16,7 @@ annotations: \ stash.appscode.com\n kind: Repository\n version: v1alpha1\n- group: stash.appscode.com\n\ \ kind: RestoreSession\n version: v1beta1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MongoDB Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -28,4 +28,4 @@ maintainers: name: appscode name: kubedbcom-mongodb-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-mongodb-editor/README.md b/charts/kubedbcom-mongodb-editor/README.md index 1f000c2995..2fb23b4df7 100644 --- a/charts/kubedbcom-mongodb-editor/README.md +++ b/charts/kubedbcom-mongodb-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-mongodb-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-mongodb-editor appscode/kubedbcom-mongodb-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-mongodb-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-mongodb-editor appscode/kubedbcom-mongodb-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDB Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `kubedbcom-mongodb-editor`: ```bash -$ helm upgrade -i kubedbcom-mongodb-editor appscode/kubedbcom-mongodb-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-mongodb-editor appscode/kubedbcom-mongodb-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MongoDB Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -220,12 +220,12 @@ The following table lists the configurable parameters of the `kubedbcom-mongodb- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-mongodb-editor appscode/kubedbcom-mongodb-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-mongodb-editor appscode/kubedbcom-mongodb-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-mongodb-editor appscode/kubedbcom-mongodb-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-mongodb-editor appscode/kubedbcom-mongodb-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-mssqlserver-editor-options/Chart.yaml b/charts/kubedbcom-mssqlserver-editor-options/Chart.yaml index 74f0a24244..1562327428 100644 --- a/charts/kubedbcom-mssqlserver-editor-options/Chart.yaml +++ b/charts/kubedbcom-mssqlserver-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-mssqlserver-editor-options description: MSSQLServer Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-mssqlserver-editor-options/README.md b/charts/kubedbcom-mssqlserver-editor-options/README.md index 94cf520599..8c09ccb4b2 100644 --- a/charts/kubedbcom-mssqlserver-editor-options/README.md +++ b/charts/kubedbcom-mssqlserver-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-mssqlserver-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-mssqlserver-editor-options appscode/kubedbcom-mssqlserver-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-mssqlserver-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-mssqlserver-editor-options appscode/kubedbcom-mssqlserver-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServer Editor UI Options on a [Kubernetes](http://kube To install/upgrade the chart with the release name `kubedbcom-mssqlserver-editor-options`: ```bash -$ helm upgrade -i kubedbcom-mssqlserver-editor-options appscode/kubedbcom-mssqlserver-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-mssqlserver-editor-options appscode/kubedbcom-mssqlserver-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLServer Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -223,12 +223,12 @@ The following table lists the configurable parameters of the `kubedbcom-mssqlser Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-mssqlserver-editor-options appscode/kubedbcom-mssqlserver-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-mssqlserver-editor-options appscode/kubedbcom-mssqlserver-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-mssqlserver-editor-options appscode/kubedbcom-mssqlserver-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-mssqlserver-editor-options appscode/kubedbcom-mssqlserver-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-mssqlserver-editor/Chart.yaml b/charts/kubedbcom-mssqlserver-editor/Chart.yaml index 342b5ad0c0..e06d5a34fa 100644 --- a/charts/kubedbcom-mssqlserver-editor/Chart.yaml +++ b/charts/kubedbcom-mssqlserver-editor/Chart.yaml @@ -14,7 +14,7 @@ annotations: \ version: v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version:\ \ v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLServer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -26,4 +26,4 @@ maintainers: name: appscode name: kubedbcom-mssqlserver-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-mssqlserver-editor/README.md b/charts/kubedbcom-mssqlserver-editor/README.md index d959319d1a..6ca568f927 100644 --- a/charts/kubedbcom-mssqlserver-editor/README.md +++ b/charts/kubedbcom-mssqlserver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-mssqlserver-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-mssqlserver-editor appscode/kubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-mssqlserver-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-mssqlserver-editor appscode/kubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServer Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `kubedbcom-mssqlserver-editor`: ```bash -$ helm upgrade -i kubedbcom-mssqlserver-editor appscode/kubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-mssqlserver-editor appscode/kubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLServer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -137,12 +137,12 @@ The following table lists the configurable parameters of the `kubedbcom-mssqlser Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-mssqlserver-editor appscode/kubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-mssqlserver-editor appscode/kubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-mssqlserver-editor appscode/kubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-mssqlserver-editor appscode/kubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-mysql-editor-options/Chart.yaml b/charts/kubedbcom-mysql-editor-options/Chart.yaml index 311856e72d..7f03614ee4 100644 --- a/charts/kubedbcom-mysql-editor-options/Chart.yaml +++ b/charts/kubedbcom-mysql-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-mysql-editor-options description: MySQL Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-mysql-editor-options/README.md b/charts/kubedbcom-mysql-editor-options/README.md index 39e6610ae1..c2352861e2 100644 --- a/charts/kubedbcom-mysql-editor-options/README.md +++ b/charts/kubedbcom-mysql-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-mysql-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-mysql-editor-options appscode/kubedbcom-mysql-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-mysql-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-mysql-editor-options appscode/kubedbcom-mysql-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQL Editor UI Options on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `kubedbcom-mysql-editor-options`: ```bash -$ helm upgrade -i kubedbcom-mysql-editor-options appscode/kubedbcom-mysql-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-mysql-editor-options appscode/kubedbcom-mysql-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a MySQL Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -318,12 +318,12 @@ The following table lists the configurable parameters of the `kubedbcom-mysql-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-mysql-editor-options appscode/kubedbcom-mysql-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-mysql-editor-options appscode/kubedbcom-mysql-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-mysql-editor-options appscode/kubedbcom-mysql-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-mysql-editor-options appscode/kubedbcom-mysql-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-mysql-editor/Chart.yaml b/charts/kubedbcom-mysql-editor/Chart.yaml index ac74b43b76..eecf7a4cae 100644 --- a/charts/kubedbcom-mysql-editor/Chart.yaml +++ b/charts/kubedbcom-mysql-editor/Chart.yaml @@ -15,7 +15,7 @@ annotations: \ version: v1beta1\n- group: stash.appscode.com\n kind: Repository\n version:\ \ v1alpha1\n- group: stash.appscode.com\n kind: RestoreSession\n version: v1beta1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MySQL Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -27,4 +27,4 @@ maintainers: name: appscode name: kubedbcom-mysql-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-mysql-editor/README.md b/charts/kubedbcom-mysql-editor/README.md index 8f6db5cf69..e34a294d65 100644 --- a/charts/kubedbcom-mysql-editor/README.md +++ b/charts/kubedbcom-mysql-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-mysql-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-mysql-editor appscode/kubedbcom-mysql-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-mysql-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-mysql-editor appscode/kubedbcom-mysql-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQL Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `kubedbcom-mysql-editor`: ```bash -$ helm upgrade -i kubedbcom-mysql-editor appscode/kubedbcom-mysql-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-mysql-editor appscode/kubedbcom-mysql-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MySQL Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -233,12 +233,12 @@ The following table lists the configurable parameters of the `kubedbcom-mysql-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-mysql-editor appscode/kubedbcom-mysql-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-mysql-editor appscode/kubedbcom-mysql-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-mysql-editor appscode/kubedbcom-mysql-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-mysql-editor appscode/kubedbcom-mysql-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-neo4j-editor-options/Chart.yaml b/charts/kubedbcom-neo4j-editor-options/Chart.yaml index f6d0234627..9136806b9a 100644 --- a/charts/kubedbcom-neo4j-editor-options/Chart.yaml +++ b/charts/kubedbcom-neo4j-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-neo4j-editor-options description: Neo4j Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-neo4j-editor-options/README.md b/charts/kubedbcom-neo4j-editor-options/README.md index 249b2a5cba..04cc7b36ad 100644 --- a/charts/kubedbcom-neo4j-editor-options/README.md +++ b/charts/kubedbcom-neo4j-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-neo4j-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-neo4j-editor-options appscode/kubedbcom-neo4j-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-neo4j-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-neo4j-editor-options appscode/kubedbcom-neo4j-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Neo4j Editor UI Options on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `kubedbcom-neo4j-editor-options`: ```bash -$ helm upgrade -i kubedbcom-neo4j-editor-options appscode/kubedbcom-neo4j-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-neo4j-editor-options appscode/kubedbcom-neo4j-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Neo4j Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -201,12 +201,12 @@ The following table lists the configurable parameters of the `kubedbcom-neo4j-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-neo4j-editor-options appscode/kubedbcom-neo4j-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-neo4j-editor-options appscode/kubedbcom-neo4j-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-neo4j-editor-options appscode/kubedbcom-neo4j-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-neo4j-editor-options appscode/kubedbcom-neo4j-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-neo4j-editor/Chart.yaml b/charts/kubedbcom-neo4j-editor/Chart.yaml index 299effe6d4..11e06be1af 100644 --- a/charts/kubedbcom-neo4j-editor/Chart.yaml +++ b/charts/kubedbcom-neo4j-editor/Chart.yaml @@ -12,7 +12,7 @@ annotations: \ version: v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version:\ \ v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Neo4j Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -24,4 +24,4 @@ maintainers: name: appscode name: kubedbcom-neo4j-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-neo4j-editor/README.md b/charts/kubedbcom-neo4j-editor/README.md index 47162841bd..17247b3997 100644 --- a/charts/kubedbcom-neo4j-editor/README.md +++ b/charts/kubedbcom-neo4j-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-neo4j-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-neo4j-editor appscode/kubedbcom-neo4j-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-neo4j-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-neo4j-editor appscode/kubedbcom-neo4j-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Neo4j Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `kubedbcom-neo4j-editor`: ```bash -$ helm upgrade -i kubedbcom-neo4j-editor appscode/kubedbcom-neo4j-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-neo4j-editor appscode/kubedbcom-neo4j-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Neo4j Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -112,12 +112,12 @@ The following table lists the configurable parameters of the `kubedbcom-neo4j-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-neo4j-editor appscode/kubedbcom-neo4j-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-neo4j-editor appscode/kubedbcom-neo4j-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-neo4j-editor appscode/kubedbcom-neo4j-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-neo4j-editor appscode/kubedbcom-neo4j-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-oracle-editor-options/Chart.yaml b/charts/kubedbcom-oracle-editor-options/Chart.yaml index 1002b7d2e5..f0bf5e9db4 100644 --- a/charts/kubedbcom-oracle-editor-options/Chart.yaml +++ b/charts/kubedbcom-oracle-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-oracle-editor-options description: Oracle Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-oracle-editor-options/README.md b/charts/kubedbcom-oracle-editor-options/README.md index 75658aab40..f79386c4c0 100644 --- a/charts/kubedbcom-oracle-editor-options/README.md +++ b/charts/kubedbcom-oracle-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-oracle-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-oracle-editor-options appscode/kubedbcom-oracle-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-oracle-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-oracle-editor-options appscode/kubedbcom-oracle-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Oracle Editor UI Options on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `kubedbcom-oracle-editor-options`: ```bash -$ helm upgrade -i kubedbcom-oracle-editor-options appscode/kubedbcom-oracle-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-oracle-editor-options appscode/kubedbcom-oracle-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Oracle Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -196,12 +196,12 @@ The following table lists the configurable parameters of the `kubedbcom-oracle-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-oracle-editor-options appscode/kubedbcom-oracle-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-oracle-editor-options appscode/kubedbcom-oracle-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-oracle-editor-options appscode/kubedbcom-oracle-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-oracle-editor-options appscode/kubedbcom-oracle-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-oracle-editor/Chart.yaml b/charts/kubedbcom-oracle-editor/Chart.yaml index 1728dfe7ef..1ed69e6d67 100644 --- a/charts/kubedbcom-oracle-editor/Chart.yaml +++ b/charts/kubedbcom-oracle-editor/Chart.yaml @@ -12,7 +12,7 @@ annotations: \ monitoring.coreos.com\n kind: PrometheusRule\n version: v1\n- group: monitoring.coreos.com\n\ \ kind: ServiceMonitor\n version: v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Oracle Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -24,4 +24,4 @@ maintainers: name: appscode name: kubedbcom-oracle-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-oracle-editor/README.md b/charts/kubedbcom-oracle-editor/README.md index 1d8425f323..fd91108988 100644 --- a/charts/kubedbcom-oracle-editor/README.md +++ b/charts/kubedbcom-oracle-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-oracle-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-oracle-editor appscode/kubedbcom-oracle-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-oracle-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-oracle-editor appscode/kubedbcom-oracle-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Oracle Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `kubedbcom-oracle-editor`: ```bash -$ helm upgrade -i kubedbcom-oracle-editor appscode/kubedbcom-oracle-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-oracle-editor appscode/kubedbcom-oracle-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Oracle Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -109,12 +109,12 @@ The following table lists the configurable parameters of the `kubedbcom-oracle-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-oracle-editor appscode/kubedbcom-oracle-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-oracle-editor appscode/kubedbcom-oracle-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-oracle-editor appscode/kubedbcom-oracle-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-oracle-editor appscode/kubedbcom-oracle-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-perconaxtradb-editor-options/Chart.yaml b/charts/kubedbcom-perconaxtradb-editor-options/Chart.yaml index 21ba52cb5d..be224be15d 100644 --- a/charts/kubedbcom-perconaxtradb-editor-options/Chart.yaml +++ b/charts/kubedbcom-perconaxtradb-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-perconaxtradb-editor-options description: PerconaXtraDB Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-perconaxtradb-editor-options/README.md b/charts/kubedbcom-perconaxtradb-editor-options/README.md index cb2b908f5c..1bafa2d581 100644 --- a/charts/kubedbcom-perconaxtradb-editor-options/README.md +++ b/charts/kubedbcom-perconaxtradb-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-perconaxtradb-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-perconaxtradb-editor-options appscode/kubedbcom-perconaxtradb-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-perconaxtradb-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-perconaxtradb-editor-options appscode/kubedbcom-perconaxtradb-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PerconaXtraDB Editor UI Options on a [Kubernetes](http://ku To install/upgrade the chart with the release name `kubedbcom-perconaxtradb-editor-options`: ```bash -$ helm upgrade -i kubedbcom-perconaxtradb-editor-options appscode/kubedbcom-perconaxtradb-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-perconaxtradb-editor-options appscode/kubedbcom-perconaxtradb-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a PerconaXtraDB Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -264,12 +264,12 @@ The following table lists the configurable parameters of the `kubedbcom-perconax Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-perconaxtradb-editor-options appscode/kubedbcom-perconaxtradb-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-perconaxtradb-editor-options appscode/kubedbcom-perconaxtradb-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-perconaxtradb-editor-options appscode/kubedbcom-perconaxtradb-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-perconaxtradb-editor-options appscode/kubedbcom-perconaxtradb-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-perconaxtradb-editor/Chart.yaml b/charts/kubedbcom-perconaxtradb-editor/Chart.yaml index c582167e2f..952211eb43 100644 --- a/charts/kubedbcom-perconaxtradb-editor/Chart.yaml +++ b/charts/kubedbcom-perconaxtradb-editor/Chart.yaml @@ -10,7 +10,7 @@ annotations: \ version: v1\n- group: monitoring.coreos.com\n kind: PrometheusRule\n version:\ \ v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version: v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PerconaXtraDB Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -22,4 +22,4 @@ maintainers: name: appscode name: kubedbcom-perconaxtradb-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-perconaxtradb-editor/README.md b/charts/kubedbcom-perconaxtradb-editor/README.md index e784f667a9..2e9ace19e9 100644 --- a/charts/kubedbcom-perconaxtradb-editor/README.md +++ b/charts/kubedbcom-perconaxtradb-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-perconaxtradb-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-perconaxtradb-editor appscode/kubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-perconaxtradb-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-perconaxtradb-editor appscode/kubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PerconaXtraDB Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `kubedbcom-perconaxtradb-editor`: ```bash -$ helm upgrade -i kubedbcom-perconaxtradb-editor appscode/kubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-perconaxtradb-editor appscode/kubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PerconaXtraDB Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -185,12 +185,12 @@ The following table lists the configurable parameters of the `kubedbcom-perconax Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-perconaxtradb-editor appscode/kubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-perconaxtradb-editor appscode/kubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-perconaxtradb-editor appscode/kubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-perconaxtradb-editor appscode/kubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-pgbouncer-editor-options/Chart.yaml b/charts/kubedbcom-pgbouncer-editor-options/Chart.yaml index ca2955b55b..f048cd2751 100644 --- a/charts/kubedbcom-pgbouncer-editor-options/Chart.yaml +++ b/charts/kubedbcom-pgbouncer-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-pgbouncer-editor-options description: PgBouncer Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-pgbouncer-editor-options/README.md b/charts/kubedbcom-pgbouncer-editor-options/README.md index 3cf49c7fb0..29903a72f4 100644 --- a/charts/kubedbcom-pgbouncer-editor-options/README.md +++ b/charts/kubedbcom-pgbouncer-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-pgbouncer-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-pgbouncer-editor-options appscode/kubedbcom-pgbouncer-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-pgbouncer-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-pgbouncer-editor-options appscode/kubedbcom-pgbouncer-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncer Editor UI Options on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `kubedbcom-pgbouncer-editor-options`: ```bash -$ helm upgrade -i kubedbcom-pgbouncer-editor-options appscode/kubedbcom-pgbouncer-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-pgbouncer-editor-options appscode/kubedbcom-pgbouncer-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a PgBouncer Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -183,12 +183,12 @@ The following table lists the configurable parameters of the `kubedbcom-pgbounce Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-pgbouncer-editor-options appscode/kubedbcom-pgbouncer-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-pgbouncer-editor-options appscode/kubedbcom-pgbouncer-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-pgbouncer-editor-options appscode/kubedbcom-pgbouncer-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-pgbouncer-editor-options appscode/kubedbcom-pgbouncer-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-pgbouncer-editor/Chart.yaml b/charts/kubedbcom-pgbouncer-editor/Chart.yaml index d5b233e8d1..0607f3408e 100644 --- a/charts/kubedbcom-pgbouncer-editor/Chart.yaml +++ b/charts/kubedbcom-pgbouncer-editor/Chart.yaml @@ -10,7 +10,7 @@ annotations: \ version: v1\n- group: monitoring.coreos.com\n kind: PrometheusRule\n version:\ \ v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version: v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PgBouncer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -22,4 +22,4 @@ maintainers: name: appscode name: kubedbcom-pgbouncer-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-pgbouncer-editor/README.md b/charts/kubedbcom-pgbouncer-editor/README.md index 46ed278a18..e3ba927727 100644 --- a/charts/kubedbcom-pgbouncer-editor/README.md +++ b/charts/kubedbcom-pgbouncer-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-pgbouncer-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-pgbouncer-editor appscode/kubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-pgbouncer-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-pgbouncer-editor appscode/kubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncer Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `kubedbcom-pgbouncer-editor`: ```bash -$ helm upgrade -i kubedbcom-pgbouncer-editor appscode/kubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-pgbouncer-editor appscode/kubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PgBouncer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -103,12 +103,12 @@ The following table lists the configurable parameters of the `kubedbcom-pgbounce Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-pgbouncer-editor appscode/kubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-pgbouncer-editor appscode/kubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-pgbouncer-editor appscode/kubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-pgbouncer-editor appscode/kubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-pgpool-editor-options/Chart.yaml b/charts/kubedbcom-pgpool-editor-options/Chart.yaml index fce523d175..3bf13359e9 100644 --- a/charts/kubedbcom-pgpool-editor-options/Chart.yaml +++ b/charts/kubedbcom-pgpool-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-pgpool-editor-options description: Pgpool Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-pgpool-editor-options/README.md b/charts/kubedbcom-pgpool-editor-options/README.md index e28dcc7025..e0ef8a72fc 100644 --- a/charts/kubedbcom-pgpool-editor-options/README.md +++ b/charts/kubedbcom-pgpool-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-pgpool-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-pgpool-editor-options appscode/kubedbcom-pgpool-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-pgpool-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-pgpool-editor-options appscode/kubedbcom-pgpool-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Pgpool Editor UI Options on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `kubedbcom-pgpool-editor-options`: ```bash -$ helm upgrade -i kubedbcom-pgpool-editor-options appscode/kubedbcom-pgpool-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-pgpool-editor-options appscode/kubedbcom-pgpool-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Pgpool Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -198,12 +198,12 @@ The following table lists the configurable parameters of the `kubedbcom-pgpool-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-pgpool-editor-options appscode/kubedbcom-pgpool-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-pgpool-editor-options appscode/kubedbcom-pgpool-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-pgpool-editor-options appscode/kubedbcom-pgpool-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-pgpool-editor-options appscode/kubedbcom-pgpool-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-pgpool-editor/Chart.yaml b/charts/kubedbcom-pgpool-editor/Chart.yaml index c3fb7adc6b..819c9e62d8 100644 --- a/charts/kubedbcom-pgpool-editor/Chart.yaml +++ b/charts/kubedbcom-pgpool-editor/Chart.yaml @@ -10,7 +10,7 @@ annotations: - group: monitoring.coreos.com\n kind: PrometheusRule\n version: v1\n- group:\ \ monitoring.coreos.com\n kind: ServiceMonitor\n version: v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Pgpool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -22,4 +22,4 @@ maintainers: name: appscode name: kubedbcom-pgpool-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-pgpool-editor/README.md b/charts/kubedbcom-pgpool-editor/README.md index 566a49b7e1..da7f7b2e92 100644 --- a/charts/kubedbcom-pgpool-editor/README.md +++ b/charts/kubedbcom-pgpool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-pgpool-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-pgpool-editor appscode/kubedbcom-pgpool-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-pgpool-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-pgpool-editor appscode/kubedbcom-pgpool-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Pgpool Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `kubedbcom-pgpool-editor`: ```bash -$ helm upgrade -i kubedbcom-pgpool-editor appscode/kubedbcom-pgpool-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-pgpool-editor appscode/kubedbcom-pgpool-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Pgpool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -119,12 +119,12 @@ The following table lists the configurable parameters of the `kubedbcom-pgpool-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-pgpool-editor appscode/kubedbcom-pgpool-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-pgpool-editor appscode/kubedbcom-pgpool-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-pgpool-editor appscode/kubedbcom-pgpool-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-pgpool-editor appscode/kubedbcom-pgpool-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-postgres-editor-options/Chart.yaml b/charts/kubedbcom-postgres-editor-options/Chart.yaml index 92fb0f8359..21d91a5bcf 100644 --- a/charts/kubedbcom-postgres-editor-options/Chart.yaml +++ b/charts/kubedbcom-postgres-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-postgres-editor-options description: Postgres Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-postgres-editor-options/README.md b/charts/kubedbcom-postgres-editor-options/README.md index d2f264ac9f..cd250d05c5 100644 --- a/charts/kubedbcom-postgres-editor-options/README.md +++ b/charts/kubedbcom-postgres-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-postgres-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-postgres-editor-options appscode/kubedbcom-postgres-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-postgres-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-postgres-editor-options appscode/kubedbcom-postgres-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Postgres Editor UI Options on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `kubedbcom-postgres-editor-options`: ```bash -$ helm upgrade -i kubedbcom-postgres-editor-options appscode/kubedbcom-postgres-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-postgres-editor-options appscode/kubedbcom-postgres-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Postgres Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -294,12 +294,12 @@ The following table lists the configurable parameters of the `kubedbcom-postgres Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-postgres-editor-options appscode/kubedbcom-postgres-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-postgres-editor-options appscode/kubedbcom-postgres-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-postgres-editor-options appscode/kubedbcom-postgres-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-postgres-editor-options appscode/kubedbcom-postgres-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-postgres-editor/Chart.yaml b/charts/kubedbcom-postgres-editor/Chart.yaml index 352d6784ef..4118ef5642 100644 --- a/charts/kubedbcom-postgres-editor/Chart.yaml +++ b/charts/kubedbcom-postgres-editor/Chart.yaml @@ -16,7 +16,7 @@ annotations: \ stash.appscode.com\n kind: Repository\n version: v1alpha1\n- group: stash.appscode.com\n\ \ kind: RestoreSession\n version: v1beta1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Postgres Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -28,4 +28,4 @@ maintainers: name: appscode name: kubedbcom-postgres-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-postgres-editor/README.md b/charts/kubedbcom-postgres-editor/README.md index 2992de13ce..269d802606 100644 --- a/charts/kubedbcom-postgres-editor/README.md +++ b/charts/kubedbcom-postgres-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-postgres-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-postgres-editor appscode/kubedbcom-postgres-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-postgres-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-postgres-editor appscode/kubedbcom-postgres-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Postgres Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `kubedbcom-postgres-editor`: ```bash -$ helm upgrade -i kubedbcom-postgres-editor appscode/kubedbcom-postgres-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-postgres-editor appscode/kubedbcom-postgres-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Postgres Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -213,12 +213,12 @@ The following table lists the configurable parameters of the `kubedbcom-postgres Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-postgres-editor appscode/kubedbcom-postgres-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-postgres-editor appscode/kubedbcom-postgres-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-postgres-editor appscode/kubedbcom-postgres-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-postgres-editor appscode/kubedbcom-postgres-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-proxysql-editor-options/Chart.yaml b/charts/kubedbcom-proxysql-editor-options/Chart.yaml index 898ab4969d..16dcf78c6c 100644 --- a/charts/kubedbcom-proxysql-editor-options/Chart.yaml +++ b/charts/kubedbcom-proxysql-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-proxysql-editor-options description: ProxySQL Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-proxysql-editor-options/README.md b/charts/kubedbcom-proxysql-editor-options/README.md index 0b60b04515..90dcaa214a 100644 --- a/charts/kubedbcom-proxysql-editor-options/README.md +++ b/charts/kubedbcom-proxysql-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-proxysql-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-proxysql-editor-options appscode/kubedbcom-proxysql-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-proxysql-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-proxysql-editor-options appscode/kubedbcom-proxysql-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQL Editor UI Options on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `kubedbcom-proxysql-editor-options`: ```bash -$ helm upgrade -i kubedbcom-proxysql-editor-options appscode/kubedbcom-proxysql-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-proxysql-editor-options appscode/kubedbcom-proxysql-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a ProxySQL Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -207,12 +207,12 @@ The following table lists the configurable parameters of the `kubedbcom-proxysql Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-proxysql-editor-options appscode/kubedbcom-proxysql-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-proxysql-editor-options appscode/kubedbcom-proxysql-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-proxysql-editor-options appscode/kubedbcom-proxysql-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-proxysql-editor-options appscode/kubedbcom-proxysql-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-proxysql-editor/Chart.yaml b/charts/kubedbcom-proxysql-editor/Chart.yaml index 315a42d3ab..9c813580c1 100644 --- a/charts/kubedbcom-proxysql-editor/Chart.yaml +++ b/charts/kubedbcom-proxysql-editor/Chart.yaml @@ -10,7 +10,7 @@ annotations: \ version: v1\n- group: monitoring.coreos.com\n kind: PrometheusRule\n version:\ \ v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version: v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProxySQL Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -22,4 +22,4 @@ maintainers: name: appscode name: kubedbcom-proxysql-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-proxysql-editor/README.md b/charts/kubedbcom-proxysql-editor/README.md index 0120f51ca7..fe97871220 100644 --- a/charts/kubedbcom-proxysql-editor/README.md +++ b/charts/kubedbcom-proxysql-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-proxysql-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-proxysql-editor appscode/kubedbcom-proxysql-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-proxysql-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-proxysql-editor appscode/kubedbcom-proxysql-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQL Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `kubedbcom-proxysql-editor`: ```bash -$ helm upgrade -i kubedbcom-proxysql-editor appscode/kubedbcom-proxysql-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-proxysql-editor appscode/kubedbcom-proxysql-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProxySQL Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -127,12 +127,12 @@ The following table lists the configurable parameters of the `kubedbcom-proxysql Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-proxysql-editor appscode/kubedbcom-proxysql-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-proxysql-editor appscode/kubedbcom-proxysql-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-proxysql-editor appscode/kubedbcom-proxysql-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-proxysql-editor appscode/kubedbcom-proxysql-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-qdrant-editor-options/Chart.yaml b/charts/kubedbcom-qdrant-editor-options/Chart.yaml index 0f65ff23a1..e3e7b3d616 100644 --- a/charts/kubedbcom-qdrant-editor-options/Chart.yaml +++ b/charts/kubedbcom-qdrant-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-qdrant-editor-options description: Qdrant Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-qdrant-editor-options/README.md b/charts/kubedbcom-qdrant-editor-options/README.md index 62339b2178..ae0c0d88f4 100644 --- a/charts/kubedbcom-qdrant-editor-options/README.md +++ b/charts/kubedbcom-qdrant-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-qdrant-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-qdrant-editor-options appscode/kubedbcom-qdrant-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-qdrant-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-qdrant-editor-options appscode/kubedbcom-qdrant-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Qdrant Editor UI Options on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `kubedbcom-qdrant-editor-options`: ```bash -$ helm upgrade -i kubedbcom-qdrant-editor-options appscode/kubedbcom-qdrant-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-qdrant-editor-options appscode/kubedbcom-qdrant-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Qdrant Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -205,12 +205,12 @@ The following table lists the configurable parameters of the `kubedbcom-qdrant-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-qdrant-editor-options appscode/kubedbcom-qdrant-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-qdrant-editor-options appscode/kubedbcom-qdrant-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-qdrant-editor-options appscode/kubedbcom-qdrant-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-qdrant-editor-options appscode/kubedbcom-qdrant-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-qdrant-editor/Chart.yaml b/charts/kubedbcom-qdrant-editor/Chart.yaml index 5918233678..b1d0b89d69 100644 --- a/charts/kubedbcom-qdrant-editor/Chart.yaml +++ b/charts/kubedbcom-qdrant-editor/Chart.yaml @@ -12,7 +12,7 @@ annotations: \ monitoring.coreos.com\n kind: PrometheusRule\n version: v1\n- group: monitoring.coreos.com\n\ \ kind: ServiceMonitor\n version: v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Qdrant Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -24,4 +24,4 @@ maintainers: name: appscode name: kubedbcom-qdrant-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-qdrant-editor/README.md b/charts/kubedbcom-qdrant-editor/README.md index 29fed80e7e..f79a10162f 100644 --- a/charts/kubedbcom-qdrant-editor/README.md +++ b/charts/kubedbcom-qdrant-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-qdrant-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-qdrant-editor appscode/kubedbcom-qdrant-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-qdrant-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-qdrant-editor appscode/kubedbcom-qdrant-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Qdrant Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `kubedbcom-qdrant-editor`: ```bash -$ helm upgrade -i kubedbcom-qdrant-editor appscode/kubedbcom-qdrant-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-qdrant-editor appscode/kubedbcom-qdrant-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Qdrant Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -119,12 +119,12 @@ The following table lists the configurable parameters of the `kubedbcom-qdrant-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-qdrant-editor appscode/kubedbcom-qdrant-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-qdrant-editor appscode/kubedbcom-qdrant-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-qdrant-editor appscode/kubedbcom-qdrant-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-qdrant-editor appscode/kubedbcom-qdrant-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-rabbitmq-editor-options/Chart.yaml b/charts/kubedbcom-rabbitmq-editor-options/Chart.yaml index 3768e38e6b..7cf91b67b7 100644 --- a/charts/kubedbcom-rabbitmq-editor-options/Chart.yaml +++ b/charts/kubedbcom-rabbitmq-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-rabbitmq-editor-options description: RabbitMQ Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-rabbitmq-editor-options/README.md b/charts/kubedbcom-rabbitmq-editor-options/README.md index a63c9ffd3a..676f20d0b6 100644 --- a/charts/kubedbcom-rabbitmq-editor-options/README.md +++ b/charts/kubedbcom-rabbitmq-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-rabbitmq-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-rabbitmq-editor-options appscode/kubedbcom-rabbitmq-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-rabbitmq-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-rabbitmq-editor-options appscode/kubedbcom-rabbitmq-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RabbitMQ Editor UI Options on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `kubedbcom-rabbitmq-editor-options`: ```bash -$ helm upgrade -i kubedbcom-rabbitmq-editor-options appscode/kubedbcom-rabbitmq-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-rabbitmq-editor-options appscode/kubedbcom-rabbitmq-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a RabbitMQ Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -203,12 +203,12 @@ The following table lists the configurable parameters of the `kubedbcom-rabbitmq Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-rabbitmq-editor-options appscode/kubedbcom-rabbitmq-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-rabbitmq-editor-options appscode/kubedbcom-rabbitmq-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-rabbitmq-editor-options appscode/kubedbcom-rabbitmq-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-rabbitmq-editor-options appscode/kubedbcom-rabbitmq-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-rabbitmq-editor/Chart.yaml b/charts/kubedbcom-rabbitmq-editor/Chart.yaml index ce91d7b85b..e1e6d923b8 100644 --- a/charts/kubedbcom-rabbitmq-editor/Chart.yaml +++ b/charts/kubedbcom-rabbitmq-editor/Chart.yaml @@ -11,7 +11,7 @@ annotations: \ version: v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version:\ \ v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RabbitMQ Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -23,4 +23,4 @@ maintainers: name: appscode name: kubedbcom-rabbitmq-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-rabbitmq-editor/README.md b/charts/kubedbcom-rabbitmq-editor/README.md index ff6847cb9e..3cbab92eec 100644 --- a/charts/kubedbcom-rabbitmq-editor/README.md +++ b/charts/kubedbcom-rabbitmq-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-rabbitmq-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-rabbitmq-editor appscode/kubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-rabbitmq-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-rabbitmq-editor appscode/kubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RabbitMQ Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `kubedbcom-rabbitmq-editor`: ```bash -$ helm upgrade -i kubedbcom-rabbitmq-editor appscode/kubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-rabbitmq-editor appscode/kubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RabbitMQ Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -124,12 +124,12 @@ The following table lists the configurable parameters of the `kubedbcom-rabbitmq Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-rabbitmq-editor appscode/kubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-rabbitmq-editor appscode/kubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-rabbitmq-editor appscode/kubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-rabbitmq-editor appscode/kubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-redis-editor-options/Chart.yaml b/charts/kubedbcom-redis-editor-options/Chart.yaml index 1bae6c2cc2..4686472c1f 100644 --- a/charts/kubedbcom-redis-editor-options/Chart.yaml +++ b/charts/kubedbcom-redis-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-redis-editor-options description: Redis Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-redis-editor-options/README.md b/charts/kubedbcom-redis-editor-options/README.md index b548bf78a5..b9d5235a70 100644 --- a/charts/kubedbcom-redis-editor-options/README.md +++ b/charts/kubedbcom-redis-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-redis-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-redis-editor-options appscode/kubedbcom-redis-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-redis-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-redis-editor-options appscode/kubedbcom-redis-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Redis Editor UI Options on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `kubedbcom-redis-editor-options`: ```bash -$ helm upgrade -i kubedbcom-redis-editor-options appscode/kubedbcom-redis-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-redis-editor-options appscode/kubedbcom-redis-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Redis Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -258,12 +258,12 @@ The following table lists the configurable parameters of the `kubedbcom-redis-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-redis-editor-options appscode/kubedbcom-redis-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-redis-editor-options appscode/kubedbcom-redis-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-redis-editor-options appscode/kubedbcom-redis-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-redis-editor-options appscode/kubedbcom-redis-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-redis-editor/Chart.yaml b/charts/kubedbcom-redis-editor/Chart.yaml index 68b4dd09ce..d08405d113 100644 --- a/charts/kubedbcom-redis-editor/Chart.yaml +++ b/charts/kubedbcom-redis-editor/Chart.yaml @@ -17,7 +17,7 @@ annotations: - group: stash.appscode.com\n kind: Repository\n version: v1alpha1\n- group:\ \ stash.appscode.com\n kind: RestoreSession\n version: v1beta1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Redis Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -29,4 +29,4 @@ maintainers: name: appscode name: kubedbcom-redis-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-redis-editor/README.md b/charts/kubedbcom-redis-editor/README.md index 4e765defd2..87636fb6ee 100644 --- a/charts/kubedbcom-redis-editor/README.md +++ b/charts/kubedbcom-redis-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-redis-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-redis-editor appscode/kubedbcom-redis-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-redis-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-redis-editor appscode/kubedbcom-redis-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Redis Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `kubedbcom-redis-editor`: ```bash -$ helm upgrade -i kubedbcom-redis-editor appscode/kubedbcom-redis-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-redis-editor appscode/kubedbcom-redis-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Redis Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -185,12 +185,12 @@ The following table lists the configurable parameters of the `kubedbcom-redis-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-redis-editor appscode/kubedbcom-redis-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-redis-editor appscode/kubedbcom-redis-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-redis-editor appscode/kubedbcom-redis-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-redis-editor appscode/kubedbcom-redis-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-redissentinel-editor/Chart.yaml b/charts/kubedbcom-redissentinel-editor/Chart.yaml index 66b8729152..b627f7c16c 100644 --- a/charts/kubedbcom-redissentinel-editor/Chart.yaml +++ b/charts/kubedbcom-redissentinel-editor/Chart.yaml @@ -8,7 +8,7 @@ annotations: \ version: v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version:\ \ v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RedisSentinel Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -20,4 +20,4 @@ maintainers: name: appscode name: kubedbcom-redissentinel-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-redissentinel-editor/README.md b/charts/kubedbcom-redissentinel-editor/README.md index 1fab73761f..1527be0c40 100644 --- a/charts/kubedbcom-redissentinel-editor/README.md +++ b/charts/kubedbcom-redissentinel-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-redissentinel-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-redissentinel-editor appscode/kubedbcom-redissentinel-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-redissentinel-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-redissentinel-editor appscode/kubedbcom-redissentinel-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisSentinel Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `kubedbcom-redissentinel-editor`: ```bash -$ helm upgrade -i kubedbcom-redissentinel-editor appscode/kubedbcom-redissentinel-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-redissentinel-editor appscode/kubedbcom-redissentinel-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RedisSentinel Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -65,12 +65,12 @@ The following table lists the configurable parameters of the `kubedbcom-redissen Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-redissentinel-editor appscode/kubedbcom-redissentinel-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-redissentinel-editor appscode/kubedbcom-redissentinel-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-redissentinel-editor appscode/kubedbcom-redissentinel-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-redissentinel-editor appscode/kubedbcom-redissentinel-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-singlestore-editor-options/Chart.yaml b/charts/kubedbcom-singlestore-editor-options/Chart.yaml index 6e93095a71..d8b0291811 100644 --- a/charts/kubedbcom-singlestore-editor-options/Chart.yaml +++ b/charts/kubedbcom-singlestore-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-singlestore-editor-options description: Singlestore Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-singlestore-editor-options/README.md b/charts/kubedbcom-singlestore-editor-options/README.md index e9cb12612f..208a6004a2 100644 --- a/charts/kubedbcom-singlestore-editor-options/README.md +++ b/charts/kubedbcom-singlestore-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-singlestore-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-singlestore-editor-options appscode/kubedbcom-singlestore-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-singlestore-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-singlestore-editor-options appscode/kubedbcom-singlestore-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Singlestore Editor UI Options on a [Kubernetes](http://kube To install/upgrade the chart with the release name `kubedbcom-singlestore-editor-options`: ```bash -$ helm upgrade -i kubedbcom-singlestore-editor-options appscode/kubedbcom-singlestore-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-singlestore-editor-options appscode/kubedbcom-singlestore-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Singlestore Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -243,12 +243,12 @@ The following table lists the configurable parameters of the `kubedbcom-singlest Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-singlestore-editor-options appscode/kubedbcom-singlestore-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-singlestore-editor-options appscode/kubedbcom-singlestore-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-singlestore-editor-options appscode/kubedbcom-singlestore-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-singlestore-editor-options appscode/kubedbcom-singlestore-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-singlestore-editor/Chart.yaml b/charts/kubedbcom-singlestore-editor/Chart.yaml index 0905d2bdb7..f3a70ef221 100644 --- a/charts/kubedbcom-singlestore-editor/Chart.yaml +++ b/charts/kubedbcom-singlestore-editor/Chart.yaml @@ -14,7 +14,7 @@ annotations: \ version: v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version:\ \ v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Singlestore Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -26,4 +26,4 @@ maintainers: name: appscode name: kubedbcom-singlestore-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-singlestore-editor/README.md b/charts/kubedbcom-singlestore-editor/README.md index 9420342f2b..91e4c533cc 100644 --- a/charts/kubedbcom-singlestore-editor/README.md +++ b/charts/kubedbcom-singlestore-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-singlestore-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-singlestore-editor appscode/kubedbcom-singlestore-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-singlestore-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-singlestore-editor appscode/kubedbcom-singlestore-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Singlestore Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `kubedbcom-singlestore-editor`: ```bash -$ helm upgrade -i kubedbcom-singlestore-editor appscode/kubedbcom-singlestore-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-singlestore-editor appscode/kubedbcom-singlestore-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Singlestore Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -156,12 +156,12 @@ The following table lists the configurable parameters of the `kubedbcom-singlest Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-singlestore-editor appscode/kubedbcom-singlestore-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-singlestore-editor appscode/kubedbcom-singlestore-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-singlestore-editor appscode/kubedbcom-singlestore-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-singlestore-editor appscode/kubedbcom-singlestore-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-solr-editor-options/Chart.yaml b/charts/kubedbcom-solr-editor-options/Chart.yaml index 4eb807d981..f5c3d6ced4 100644 --- a/charts/kubedbcom-solr-editor-options/Chart.yaml +++ b/charts/kubedbcom-solr-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-solr-editor-options description: Solr Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-solr-editor-options/README.md b/charts/kubedbcom-solr-editor-options/README.md index a02b135b7f..2c3daf57ad 100644 --- a/charts/kubedbcom-solr-editor-options/README.md +++ b/charts/kubedbcom-solr-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-solr-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-solr-editor-options appscode/kubedbcom-solr-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-solr-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-solr-editor-options appscode/kubedbcom-solr-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Solr Editor UI Options on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `kubedbcom-solr-editor-options`: ```bash -$ helm upgrade -i kubedbcom-solr-editor-options appscode/kubedbcom-solr-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-solr-editor-options appscode/kubedbcom-solr-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Solr Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -221,12 +221,12 @@ The following table lists the configurable parameters of the `kubedbcom-solr-edi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-solr-editor-options appscode/kubedbcom-solr-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-solr-editor-options appscode/kubedbcom-solr-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-solr-editor-options appscode/kubedbcom-solr-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-solr-editor-options appscode/kubedbcom-solr-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-solr-editor/Chart.yaml b/charts/kubedbcom-solr-editor/Chart.yaml index 4fd5fec16e..0ea23f553c 100644 --- a/charts/kubedbcom-solr-editor/Chart.yaml +++ b/charts/kubedbcom-solr-editor/Chart.yaml @@ -13,7 +13,7 @@ annotations: \ kind: PrometheusRule\n version: v1\n- group: monitoring.coreos.com\n kind:\ \ ServiceMonitor\n version: v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Solr Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -25,4 +25,4 @@ maintainers: name: appscode name: kubedbcom-solr-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-solr-editor/README.md b/charts/kubedbcom-solr-editor/README.md index c0105eee92..3402bf03a0 100644 --- a/charts/kubedbcom-solr-editor/README.md +++ b/charts/kubedbcom-solr-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-solr-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-solr-editor appscode/kubedbcom-solr-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-solr-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-solr-editor appscode/kubedbcom-solr-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Solr Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `kubedbcom-solr-editor`: ```bash -$ helm upgrade -i kubedbcom-solr-editor appscode/kubedbcom-solr-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-solr-editor appscode/kubedbcom-solr-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Solr Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -127,12 +127,12 @@ The following table lists the configurable parameters of the `kubedbcom-solr-edi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-solr-editor appscode/kubedbcom-solr-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-solr-editor appscode/kubedbcom-solr-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-solr-editor appscode/kubedbcom-solr-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-solr-editor appscode/kubedbcom-solr-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-weaviate-editor-options/Chart.yaml b/charts/kubedbcom-weaviate-editor-options/Chart.yaml index 7d4c7757d7..cb62af2848 100644 --- a/charts/kubedbcom-weaviate-editor-options/Chart.yaml +++ b/charts/kubedbcom-weaviate-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-weaviate-editor-options description: Weaviate Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-weaviate-editor-options/README.md b/charts/kubedbcom-weaviate-editor-options/README.md index 2a91370c1f..252ce7ed96 100644 --- a/charts/kubedbcom-weaviate-editor-options/README.md +++ b/charts/kubedbcom-weaviate-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-weaviate-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-weaviate-editor-options appscode/kubedbcom-weaviate-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-weaviate-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-weaviate-editor-options appscode/kubedbcom-weaviate-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Weaviate Editor UI Options on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `kubedbcom-weaviate-editor-options`: ```bash -$ helm upgrade -i kubedbcom-weaviate-editor-options appscode/kubedbcom-weaviate-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-weaviate-editor-options appscode/kubedbcom-weaviate-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Weaviate Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -230,12 +230,12 @@ The following table lists the configurable parameters of the `kubedbcom-weaviate Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-weaviate-editor-options appscode/kubedbcom-weaviate-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-weaviate-editor-options appscode/kubedbcom-weaviate-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-weaviate-editor-options appscode/kubedbcom-weaviate-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-weaviate-editor-options appscode/kubedbcom-weaviate-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-weaviate-editor/Chart.yaml b/charts/kubedbcom-weaviate-editor/Chart.yaml index 92b2492975..5674aedec7 100644 --- a/charts/kubedbcom-weaviate-editor/Chart.yaml +++ b/charts/kubedbcom-weaviate-editor/Chart.yaml @@ -10,7 +10,7 @@ annotations: \ version: v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version:\ \ v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Weaviate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -22,4 +22,4 @@ maintainers: name: appscode name: kubedbcom-weaviate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-weaviate-editor/README.md b/charts/kubedbcom-weaviate-editor/README.md index fdfbfa558a..5042221301 100644 --- a/charts/kubedbcom-weaviate-editor/README.md +++ b/charts/kubedbcom-weaviate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-weaviate-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-weaviate-editor appscode/kubedbcom-weaviate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-weaviate-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-weaviate-editor appscode/kubedbcom-weaviate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Weaviate Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `kubedbcom-weaviate-editor`: ```bash -$ helm upgrade -i kubedbcom-weaviate-editor appscode/kubedbcom-weaviate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-weaviate-editor appscode/kubedbcom-weaviate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Weaviate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -144,12 +144,12 @@ The following table lists the configurable parameters of the `kubedbcom-weaviate Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-weaviate-editor appscode/kubedbcom-weaviate-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-weaviate-editor appscode/kubedbcom-weaviate-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-weaviate-editor appscode/kubedbcom-weaviate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-weaviate-editor appscode/kubedbcom-weaviate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-zookeeper-editor-options/Chart.yaml b/charts/kubedbcom-zookeeper-editor-options/Chart.yaml index 58bab27b1a..f4bd8c7bf3 100644 --- a/charts/kubedbcom-zookeeper-editor-options/Chart.yaml +++ b/charts/kubedbcom-zookeeper-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-zookeeper-editor-options description: ZooKeeper Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-zookeeper-editor-options/README.md b/charts/kubedbcom-zookeeper-editor-options/README.md index a64efa5119..87c2486f03 100644 --- a/charts/kubedbcom-zookeeper-editor-options/README.md +++ b/charts/kubedbcom-zookeeper-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-zookeeper-editor-options --version=v0.38.0 -$ helm upgrade -i kubedbcom-zookeeper-editor-options appscode/kubedbcom-zookeeper-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-zookeeper-editor-options --version=v0.39.0 +$ helm upgrade -i kubedbcom-zookeeper-editor-options appscode/kubedbcom-zookeeper-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ZooKeeper Editor UI Options on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `kubedbcom-zookeeper-editor-options`: ```bash -$ helm upgrade -i kubedbcom-zookeeper-editor-options appscode/kubedbcom-zookeeper-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-zookeeper-editor-options appscode/kubedbcom-zookeeper-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a ZooKeeper Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -208,12 +208,12 @@ The following table lists the configurable parameters of the `kubedbcom-zookeepe Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-zookeeper-editor-options appscode/kubedbcom-zookeeper-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-zookeeper-editor-options appscode/kubedbcom-zookeeper-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-zookeeper-editor-options appscode/kubedbcom-zookeeper-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-zookeeper-editor-options appscode/kubedbcom-zookeeper-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubedbcom-zookeeper-editor/Chart.yaml b/charts/kubedbcom-zookeeper-editor/Chart.yaml index 1d98cf57f3..8294e0568a 100644 --- a/charts/kubedbcom-zookeeper-editor/Chart.yaml +++ b/charts/kubedbcom-zookeeper-editor/Chart.yaml @@ -13,7 +13,7 @@ annotations: \ version: v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version:\ \ v1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ZooKeeper Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -25,4 +25,4 @@ maintainers: name: appscode name: kubedbcom-zookeeper-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubedbcom-zookeeper-editor/README.md b/charts/kubedbcom-zookeeper-editor/README.md index 308783afb9..247e8ae7d0 100644 --- a/charts/kubedbcom-zookeeper-editor/README.md +++ b/charts/kubedbcom-zookeeper-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-zookeeper-editor --version=v0.38.0 -$ helm upgrade -i kubedbcom-zookeeper-editor appscode/kubedbcom-zookeeper-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubedbcom-zookeeper-editor --version=v0.39.0 +$ helm upgrade -i kubedbcom-zookeeper-editor appscode/kubedbcom-zookeeper-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ZooKeeper Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `kubedbcom-zookeeper-editor`: ```bash -$ helm upgrade -i kubedbcom-zookeeper-editor appscode/kubedbcom-zookeeper-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubedbcom-zookeeper-editor appscode/kubedbcom-zookeeper-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ZooKeeper Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -141,12 +141,12 @@ The following table lists the configurable parameters of the `kubedbcom-zookeepe Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-zookeeper-editor appscode/kubedbcom-zookeeper-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-zookeeper-editor appscode/kubedbcom-zookeeper-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-zookeeper-editor appscode/kubedbcom-zookeeper-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubedbcom-zookeeper-editor appscode/kubedbcom-zookeeper-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubevaultcom-vaultserver-editor-options/Chart.yaml b/charts/kubevaultcom-vaultserver-editor-options/Chart.yaml index bbb325d367..6cd76e093e 100644 --- a/charts/kubevaultcom-vaultserver-editor-options/Chart.yaml +++ b/charts/kubevaultcom-vaultserver-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubevaultcom-vaultserver-editor-options description: VaultServer Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubevaultcom-vaultserver-editor-options/README.md b/charts/kubevaultcom-vaultserver-editor-options/README.md index b9a9184215..a54b4a30b0 100644 --- a/charts/kubevaultcom-vaultserver-editor-options/README.md +++ b/charts/kubevaultcom-vaultserver-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubevaultcom-vaultserver-editor-options --version=v0.38.0 -$ helm upgrade -i kubevaultcom-vaultserver-editor-options appscode/kubevaultcom-vaultserver-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubevaultcom-vaultserver-editor-options --version=v0.39.0 +$ helm upgrade -i kubevaultcom-vaultserver-editor-options appscode/kubevaultcom-vaultserver-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VaultServer Editor UI Options on a [Kubernetes](http://kube To install/upgrade the chart with the release name `kubevaultcom-vaultserver-editor-options`: ```bash -$ helm upgrade -i kubevaultcom-vaultserver-editor-options appscode/kubevaultcom-vaultserver-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i kubevaultcom-vaultserver-editor-options appscode/kubevaultcom-vaultserver-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a VaultServer Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -260,12 +260,12 @@ The following table lists the configurable parameters of the `kubevaultcom-vault Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubevaultcom-vaultserver-editor-options appscode/kubevaultcom-vaultserver-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=kubevault.com +$ helm upgrade -i kubevaultcom-vaultserver-editor-options appscode/kubevaultcom-vaultserver-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=kubevault.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubevaultcom-vaultserver-editor-options appscode/kubevaultcom-vaultserver-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubevaultcom-vaultserver-editor-options appscode/kubevaultcom-vaultserver-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kubevaultcom-vaultserver-editor/Chart.yaml b/charts/kubevaultcom-vaultserver-editor/Chart.yaml index 71034d3b3c..25864e6441 100644 --- a/charts/kubevaultcom-vaultserver-editor/Chart.yaml +++ b/charts/kubevaultcom-vaultserver-editor/Chart.yaml @@ -9,7 +9,7 @@ annotations: \ version: v1beta1\n- group: stash.appscode.com\n kind: Repository\n version:\ \ v1alpha1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: VaultServer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -21,4 +21,4 @@ maintainers: name: appscode name: kubevaultcom-vaultserver-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kubevaultcom-vaultserver-editor/README.md b/charts/kubevaultcom-vaultserver-editor/README.md index e25d8c2814..861050d79a 100644 --- a/charts/kubevaultcom-vaultserver-editor/README.md +++ b/charts/kubevaultcom-vaultserver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubevaultcom-vaultserver-editor --version=v0.38.0 -$ helm upgrade -i kubevaultcom-vaultserver-editor appscode/kubevaultcom-vaultserver-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kubevaultcom-vaultserver-editor --version=v0.39.0 +$ helm upgrade -i kubevaultcom-vaultserver-editor appscode/kubevaultcom-vaultserver-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VaultServer Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `kubevaultcom-vaultserver-editor`: ```bash -$ helm upgrade -i kubevaultcom-vaultserver-editor appscode/kubevaultcom-vaultserver-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kubevaultcom-vaultserver-editor appscode/kubevaultcom-vaultserver-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a VaultServer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -154,12 +154,12 @@ The following table lists the configurable parameters of the `kubevaultcom-vault Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubevaultcom-vaultserver-editor appscode/kubevaultcom-vaultserver-editor -n default --create-namespace --version=v0.38.0 --set form.alert.enabled=warning +$ helm upgrade -i kubevaultcom-vaultserver-editor appscode/kubevaultcom-vaultserver-editor -n default --create-namespace --version=v0.39.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubevaultcom-vaultserver-editor appscode/kubevaultcom-vaultserver-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kubevaultcom-vaultserver-editor appscode/kubevaultcom-vaultserver-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/kustomizetoolkitfluxcdio-kustomization-editor/Chart.yaml b/charts/kustomizetoolkitfluxcdio-kustomization-editor/Chart.yaml index 6d45e860f3..ef7dcf1404 100644 --- a/charts/kustomizetoolkitfluxcdio-kustomization-editor/Chart.yaml +++ b/charts/kustomizetoolkitfluxcdio-kustomization-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kustomize.toolkit.fluxcd.io","version":"v1","resource":"kustomizations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Kustomization Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kustomizetoolkitfluxcdio-kustomization-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/kustomizetoolkitfluxcdio-kustomization-editor/README.md b/charts/kustomizetoolkitfluxcdio-kustomization-editor/README.md index f5cf014192..a4bb0fb227 100644 --- a/charts/kustomizetoolkitfluxcdio-kustomization-editor/README.md +++ b/charts/kustomizetoolkitfluxcdio-kustomization-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kustomizetoolkitfluxcdio-kustomization-editor --version=v0.38.0 -$ helm upgrade -i kustomizetoolkitfluxcdio-kustomization-editor appscode/kustomizetoolkitfluxcdio-kustomization-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/kustomizetoolkitfluxcdio-kustomization-editor --version=v0.39.0 +$ helm upgrade -i kustomizetoolkitfluxcdio-kustomization-editor appscode/kustomizetoolkitfluxcdio-kustomization-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Kustomization Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `kustomizetoolkitfluxcdio-kustomization-editor`: ```bash -$ helm upgrade -i kustomizetoolkitfluxcdio-kustomization-editor appscode/kustomizetoolkitfluxcdio-kustomization-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i kustomizetoolkitfluxcdio-kustomization-editor appscode/kustomizetoolkitfluxcdio-kustomization-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Kustomization Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kustomizetoolkitfl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kustomizetoolkitfluxcdio-kustomization-editor appscode/kustomizetoolkitfluxcdio-kustomization-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=kustomize.toolkit.fluxcd.io/v1 +$ helm upgrade -i kustomizetoolkitfluxcdio-kustomization-editor appscode/kustomizetoolkitfluxcdio-kustomization-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=kustomize.toolkit.fluxcd.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kustomizetoolkitfluxcdio-kustomization-editor appscode/kustomizetoolkitfluxcdio-kustomization-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i kustomizetoolkitfluxcdio-kustomization-editor appscode/kustomizetoolkitfluxcdio-kustomization-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/managementk8sappscodecom-projectquota-editor/Chart.yaml b/charts/managementk8sappscodecom-projectquota-editor/Chart.yaml index ad9de1c186..2019feb23d 100644 --- a/charts/managementk8sappscodecom-projectquota-editor/Chart.yaml +++ b/charts/managementk8sappscodecom-projectquota-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"management.k8s.appscode.com","version":"v1alpha1","resource":"projectquotas"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProjectQuota Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: managementk8sappscodecom-projectquota-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/managementk8sappscodecom-projectquota-editor/README.md b/charts/managementk8sappscodecom-projectquota-editor/README.md index 4d8665f41b..f399756122 100644 --- a/charts/managementk8sappscodecom-projectquota-editor/README.md +++ b/charts/managementk8sappscodecom-projectquota-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/managementk8sappscodecom-projectquota-editor --version=v0.38.0 -$ helm upgrade -i managementk8sappscodecom-projectquota-editor appscode/managementk8sappscodecom-projectquota-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/managementk8sappscodecom-projectquota-editor --version=v0.39.0 +$ helm upgrade -i managementk8sappscodecom-projectquota-editor appscode/managementk8sappscodecom-projectquota-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProjectQuota Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `managementk8sappscodecom-projectquota-editor`: ```bash -$ helm upgrade -i managementk8sappscodecom-projectquota-editor appscode/managementk8sappscodecom-projectquota-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i managementk8sappscodecom-projectquota-editor appscode/managementk8sappscodecom-projectquota-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProjectQuota Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `managementk8sappsc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i managementk8sappscodecom-projectquota-editor appscode/managementk8sappscodecom-projectquota-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=management.k8s.appscode.com/v1alpha1 +$ helm upgrade -i managementk8sappscodecom-projectquota-editor appscode/managementk8sappscodecom-projectquota-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=management.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i managementk8sappscodecom-projectquota-editor appscode/managementk8sappscodecom-projectquota-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i managementk8sappscodecom-projectquota-editor appscode/managementk8sappscodecom-projectquota-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/matchgatekeepersh-dummycrd-editor/Chart.yaml b/charts/matchgatekeepersh-dummycrd-editor/Chart.yaml index f61d3436f8..f8fc79f2f7 100644 --- a/charts/matchgatekeepersh-dummycrd-editor/Chart.yaml +++ b/charts/matchgatekeepersh-dummycrd-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"match.gatekeeper.sh","version":"match","resource":"matchcrd"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DummyCRD Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: matchgatekeepersh-dummycrd-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/matchgatekeepersh-dummycrd-editor/README.md b/charts/matchgatekeepersh-dummycrd-editor/README.md index 8ea7e81183..f9a9052db0 100644 --- a/charts/matchgatekeepersh-dummycrd-editor/README.md +++ b/charts/matchgatekeepersh-dummycrd-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/matchgatekeepersh-dummycrd-editor --version=v0.38.0 -$ helm upgrade -i matchgatekeepersh-dummycrd-editor appscode/matchgatekeepersh-dummycrd-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/matchgatekeepersh-dummycrd-editor --version=v0.39.0 +$ helm upgrade -i matchgatekeepersh-dummycrd-editor appscode/matchgatekeepersh-dummycrd-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DummyCRD Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `matchgatekeepersh-dummycrd-editor`: ```bash -$ helm upgrade -i matchgatekeepersh-dummycrd-editor appscode/matchgatekeepersh-dummycrd-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i matchgatekeepersh-dummycrd-editor appscode/matchgatekeepersh-dummycrd-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DummyCRD Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `matchgatekeepersh- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i matchgatekeepersh-dummycrd-editor appscode/matchgatekeepersh-dummycrd-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=match.gatekeeper.sh/match +$ helm upgrade -i matchgatekeepersh-dummycrd-editor appscode/matchgatekeepersh-dummycrd-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=match.gatekeeper.sh/match ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i matchgatekeepersh-dummycrd-editor appscode/matchgatekeepersh-dummycrd-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i matchgatekeepersh-dummycrd-editor appscode/matchgatekeepersh-dummycrd-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/memorydbawskubedbcom-acl-editor/Chart.yaml b/charts/memorydbawskubedbcom-acl-editor/Chart.yaml index 11ef789ce1..75ce8173e4 100644 --- a/charts/memorydbawskubedbcom-acl-editor/Chart.yaml +++ b/charts/memorydbawskubedbcom-acl-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"memorydb.aws.kubedb.com","version":"v1alpha1","resource":"acls"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ACL Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: memorydbawskubedbcom-acl-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/memorydbawskubedbcom-acl-editor/README.md b/charts/memorydbawskubedbcom-acl-editor/README.md index eeb97c9abe..54f4b09e96 100644 --- a/charts/memorydbawskubedbcom-acl-editor/README.md +++ b/charts/memorydbawskubedbcom-acl-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/memorydbawskubedbcom-acl-editor --version=v0.38.0 -$ helm upgrade -i memorydbawskubedbcom-acl-editor appscode/memorydbawskubedbcom-acl-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/memorydbawskubedbcom-acl-editor --version=v0.39.0 +$ helm upgrade -i memorydbawskubedbcom-acl-editor appscode/memorydbawskubedbcom-acl-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ACL Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `memorydbawskubedbcom-acl-editor`: ```bash -$ helm upgrade -i memorydbawskubedbcom-acl-editor appscode/memorydbawskubedbcom-acl-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i memorydbawskubedbcom-acl-editor appscode/memorydbawskubedbcom-acl-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ACL Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `memorydbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i memorydbawskubedbcom-acl-editor appscode/memorydbawskubedbcom-acl-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=memorydb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i memorydbawskubedbcom-acl-editor appscode/memorydbawskubedbcom-acl-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=memorydb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i memorydbawskubedbcom-acl-editor appscode/memorydbawskubedbcom-acl-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i memorydbawskubedbcom-acl-editor appscode/memorydbawskubedbcom-acl-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/memorydbawskubedbcom-cluster-editor/Chart.yaml b/charts/memorydbawskubedbcom-cluster-editor/Chart.yaml index a4e86bab5f..81b3a9e6fb 100644 --- a/charts/memorydbawskubedbcom-cluster-editor/Chart.yaml +++ b/charts/memorydbawskubedbcom-cluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"memorydb.aws.kubedb.com","version":"v1alpha1","resource":"clusters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Cluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: memorydbawskubedbcom-cluster-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/memorydbawskubedbcom-cluster-editor/README.md b/charts/memorydbawskubedbcom-cluster-editor/README.md index fa8af440f0..1d0f67aea9 100644 --- a/charts/memorydbawskubedbcom-cluster-editor/README.md +++ b/charts/memorydbawskubedbcom-cluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/memorydbawskubedbcom-cluster-editor --version=v0.38.0 -$ helm upgrade -i memorydbawskubedbcom-cluster-editor appscode/memorydbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/memorydbawskubedbcom-cluster-editor --version=v0.39.0 +$ helm upgrade -i memorydbawskubedbcom-cluster-editor appscode/memorydbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Cluster Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `memorydbawskubedbcom-cluster-editor`: ```bash -$ helm upgrade -i memorydbawskubedbcom-cluster-editor appscode/memorydbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i memorydbawskubedbcom-cluster-editor appscode/memorydbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Cluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `memorydbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i memorydbawskubedbcom-cluster-editor appscode/memorydbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=memorydb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i memorydbawskubedbcom-cluster-editor appscode/memorydbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=memorydb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i memorydbawskubedbcom-cluster-editor appscode/memorydbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i memorydbawskubedbcom-cluster-editor appscode/memorydbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/memorydbawskubedbcom-parametergroup-editor/Chart.yaml b/charts/memorydbawskubedbcom-parametergroup-editor/Chart.yaml index cc06046911..ce5e0dd785 100644 --- a/charts/memorydbawskubedbcom-parametergroup-editor/Chart.yaml +++ b/charts/memorydbawskubedbcom-parametergroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"memorydb.aws.kubedb.com","version":"v1alpha1","resource":"parametergroups"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ParameterGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: memorydbawskubedbcom-parametergroup-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/memorydbawskubedbcom-parametergroup-editor/README.md b/charts/memorydbawskubedbcom-parametergroup-editor/README.md index 3dbf33f158..51585720af 100644 --- a/charts/memorydbawskubedbcom-parametergroup-editor/README.md +++ b/charts/memorydbawskubedbcom-parametergroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/memorydbawskubedbcom-parametergroup-editor --version=v0.38.0 -$ helm upgrade -i memorydbawskubedbcom-parametergroup-editor appscode/memorydbawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/memorydbawskubedbcom-parametergroup-editor --version=v0.39.0 +$ helm upgrade -i memorydbawskubedbcom-parametergroup-editor appscode/memorydbawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ParameterGroup Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `memorydbawskubedbcom-parametergroup-editor`: ```bash -$ helm upgrade -i memorydbawskubedbcom-parametergroup-editor appscode/memorydbawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i memorydbawskubedbcom-parametergroup-editor appscode/memorydbawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ParameterGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `memorydbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i memorydbawskubedbcom-parametergroup-editor appscode/memorydbawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=memorydb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i memorydbawskubedbcom-parametergroup-editor appscode/memorydbawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=memorydb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i memorydbawskubedbcom-parametergroup-editor appscode/memorydbawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i memorydbawskubedbcom-parametergroup-editor appscode/memorydbawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/memorydbawskubedbcom-snapshot-editor/Chart.yaml b/charts/memorydbawskubedbcom-snapshot-editor/Chart.yaml index 5a3ec9fe37..a43738b5a9 100644 --- a/charts/memorydbawskubedbcom-snapshot-editor/Chart.yaml +++ b/charts/memorydbawskubedbcom-snapshot-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"memorydb.aws.kubedb.com","version":"v1alpha1","resource":"snapshots"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Snapshot Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: memorydbawskubedbcom-snapshot-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/memorydbawskubedbcom-snapshot-editor/README.md b/charts/memorydbawskubedbcom-snapshot-editor/README.md index 089f4acaa1..3b3ca6cf09 100644 --- a/charts/memorydbawskubedbcom-snapshot-editor/README.md +++ b/charts/memorydbawskubedbcom-snapshot-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/memorydbawskubedbcom-snapshot-editor --version=v0.38.0 -$ helm upgrade -i memorydbawskubedbcom-snapshot-editor appscode/memorydbawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/memorydbawskubedbcom-snapshot-editor --version=v0.39.0 +$ helm upgrade -i memorydbawskubedbcom-snapshot-editor appscode/memorydbawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Snapshot Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `memorydbawskubedbcom-snapshot-editor`: ```bash -$ helm upgrade -i memorydbawskubedbcom-snapshot-editor appscode/memorydbawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i memorydbawskubedbcom-snapshot-editor appscode/memorydbawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Snapshot Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `memorydbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i memorydbawskubedbcom-snapshot-editor appscode/memorydbawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=memorydb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i memorydbawskubedbcom-snapshot-editor appscode/memorydbawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=memorydb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i memorydbawskubedbcom-snapshot-editor appscode/memorydbawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i memorydbawskubedbcom-snapshot-editor appscode/memorydbawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/memorydbawskubedbcom-subnetgroup-editor/Chart.yaml b/charts/memorydbawskubedbcom-subnetgroup-editor/Chart.yaml index bf2db7c790..6d046ecd82 100644 --- a/charts/memorydbawskubedbcom-subnetgroup-editor/Chart.yaml +++ b/charts/memorydbawskubedbcom-subnetgroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"memorydb.aws.kubedb.com","version":"v1alpha1","resource":"subnetgroups"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SubnetGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: memorydbawskubedbcom-subnetgroup-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/memorydbawskubedbcom-subnetgroup-editor/README.md b/charts/memorydbawskubedbcom-subnetgroup-editor/README.md index 6ff895ad07..8d93bf4c44 100644 --- a/charts/memorydbawskubedbcom-subnetgroup-editor/README.md +++ b/charts/memorydbawskubedbcom-subnetgroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/memorydbawskubedbcom-subnetgroup-editor --version=v0.38.0 -$ helm upgrade -i memorydbawskubedbcom-subnetgroup-editor appscode/memorydbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/memorydbawskubedbcom-subnetgroup-editor --version=v0.39.0 +$ helm upgrade -i memorydbawskubedbcom-subnetgroup-editor appscode/memorydbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SubnetGroup Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `memorydbawskubedbcom-subnetgroup-editor`: ```bash -$ helm upgrade -i memorydbawskubedbcom-subnetgroup-editor appscode/memorydbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i memorydbawskubedbcom-subnetgroup-editor appscode/memorydbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SubnetGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `memorydbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i memorydbawskubedbcom-subnetgroup-editor appscode/memorydbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=memorydb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i memorydbawskubedbcom-subnetgroup-editor appscode/memorydbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=memorydb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i memorydbawskubedbcom-subnetgroup-editor appscode/memorydbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i memorydbawskubedbcom-subnetgroup-editor appscode/memorydbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/metaappscodecom-resourcedescriptor-editor/Chart.yaml b/charts/metaappscodecom-resourcedescriptor-editor/Chart.yaml index 3725e706e0..e9d9c98d4f 100644 --- a/charts/metaappscodecom-resourcedescriptor-editor/Chart.yaml +++ b/charts/metaappscodecom-resourcedescriptor-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.appscode.com","version":"v1alpha1","resource":"resourcedescriptors"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ResourceDescriptor Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metaappscodecom-resourcedescriptor-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/metaappscodecom-resourcedescriptor-editor/README.md b/charts/metaappscodecom-resourcedescriptor-editor/README.md index 37390b3ed4..cf4bf33013 100644 --- a/charts/metaappscodecom-resourcedescriptor-editor/README.md +++ b/charts/metaappscodecom-resourcedescriptor-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metaappscodecom-resourcedescriptor-editor --version=v0.38.0 -$ helm upgrade -i metaappscodecom-resourcedescriptor-editor appscode/metaappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/metaappscodecom-resourcedescriptor-editor --version=v0.39.0 +$ helm upgrade -i metaappscodecom-resourcedescriptor-editor appscode/metaappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceDescriptor Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `metaappscodecom-resourcedescriptor-editor`: ```bash -$ helm upgrade -i metaappscodecom-resourcedescriptor-editor appscode/metaappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i metaappscodecom-resourcedescriptor-editor appscode/metaappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ResourceDescriptor Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metaappscodecom-re Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metaappscodecom-resourcedescriptor-editor appscode/metaappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=meta.appscode.com/v1alpha1 +$ helm upgrade -i metaappscodecom-resourcedescriptor-editor appscode/metaappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=meta.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metaappscodecom-resourcedescriptor-editor appscode/metaappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i metaappscodecom-resourcedescriptor-editor appscode/metaappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-clusterprofile-editor/Chart.yaml b/charts/metak8sappscodecom-clusterprofile-editor/Chart.yaml index 6587d68c0e..83248bdac7 100644 --- a/charts/metak8sappscodecom-clusterprofile-editor/Chart.yaml +++ b/charts/metak8sappscodecom-clusterprofile-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"clusterprofiles"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterProfile Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-clusterprofile-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/metak8sappscodecom-clusterprofile-editor/README.md b/charts/metak8sappscodecom-clusterprofile-editor/README.md index 70162e2a0f..667686d226 100644 --- a/charts/metak8sappscodecom-clusterprofile-editor/README.md +++ b/charts/metak8sappscodecom-clusterprofile-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-clusterprofile-editor --version=v0.38.0 -$ helm upgrade -i metak8sappscodecom-clusterprofile-editor appscode/metak8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/metak8sappscodecom-clusterprofile-editor --version=v0.39.0 +$ helm upgrade -i metak8sappscodecom-clusterprofile-editor appscode/metak8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterProfile Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `metak8sappscodecom-clusterprofile-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-clusterprofile-editor appscode/metak8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i metak8sappscodecom-clusterprofile-editor appscode/metak8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterProfile Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-clusterprofile-editor appscode/metak8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-clusterprofile-editor appscode/metak8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-clusterprofile-editor appscode/metak8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-clusterprofile-editor appscode/metak8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-clusterstatus-editor/Chart.yaml b/charts/metak8sappscodecom-clusterstatus-editor/Chart.yaml index 530c9fb42b..5812e5fc41 100644 --- a/charts/metak8sappscodecom-clusterstatus-editor/Chart.yaml +++ b/charts/metak8sappscodecom-clusterstatus-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"clusterstatuses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterStatus Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-clusterstatus-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/metak8sappscodecom-clusterstatus-editor/README.md b/charts/metak8sappscodecom-clusterstatus-editor/README.md index 82c40d18fb..3751d8931c 100644 --- a/charts/metak8sappscodecom-clusterstatus-editor/README.md +++ b/charts/metak8sappscodecom-clusterstatus-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-clusterstatus-editor --version=v0.38.0 -$ helm upgrade -i metak8sappscodecom-clusterstatus-editor appscode/metak8sappscodecom-clusterstatus-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/metak8sappscodecom-clusterstatus-editor --version=v0.39.0 +$ helm upgrade -i metak8sappscodecom-clusterstatus-editor appscode/metak8sappscodecom-clusterstatus-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterStatus Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `metak8sappscodecom-clusterstatus-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-clusterstatus-editor appscode/metak8sappscodecom-clusterstatus-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i metak8sappscodecom-clusterstatus-editor appscode/metak8sappscodecom-clusterstatus-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterStatus Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-clusterstatus-editor appscode/metak8sappscodecom-clusterstatus-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-clusterstatus-editor appscode/metak8sappscodecom-clusterstatus-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-clusterstatus-editor appscode/metak8sappscodecom-clusterstatus-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-clusterstatus-editor appscode/metak8sappscodecom-clusterstatus-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-gatewayinfo-editor/Chart.yaml b/charts/metak8sappscodecom-gatewayinfo-editor/Chart.yaml index d6585c562d..0095ec81e5 100644 --- a/charts/metak8sappscodecom-gatewayinfo-editor/Chart.yaml +++ b/charts/metak8sappscodecom-gatewayinfo-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"gatewayinfoes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GatewayInfo Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-gatewayinfo-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/metak8sappscodecom-gatewayinfo-editor/README.md b/charts/metak8sappscodecom-gatewayinfo-editor/README.md index 9be58d37cf..eee9bab9a3 100644 --- a/charts/metak8sappscodecom-gatewayinfo-editor/README.md +++ b/charts/metak8sappscodecom-gatewayinfo-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-gatewayinfo-editor --version=v0.38.0 -$ helm upgrade -i metak8sappscodecom-gatewayinfo-editor appscode/metak8sappscodecom-gatewayinfo-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/metak8sappscodecom-gatewayinfo-editor --version=v0.39.0 +$ helm upgrade -i metak8sappscodecom-gatewayinfo-editor appscode/metak8sappscodecom-gatewayinfo-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GatewayInfo Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `metak8sappscodecom-gatewayinfo-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-gatewayinfo-editor appscode/metak8sappscodecom-gatewayinfo-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i metak8sappscodecom-gatewayinfo-editor appscode/metak8sappscodecom-gatewayinfo-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GatewayInfo Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-gatewayinfo-editor appscode/metak8sappscodecom-gatewayinfo-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-gatewayinfo-editor appscode/metak8sappscodecom-gatewayinfo-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-gatewayinfo-editor appscode/metak8sappscodecom-gatewayinfo-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-gatewayinfo-editor appscode/metak8sappscodecom-gatewayinfo-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-menu-editor/Chart.yaml b/charts/metak8sappscodecom-menu-editor/Chart.yaml index 8001f44e43..527e1653e6 100644 --- a/charts/metak8sappscodecom-menu-editor/Chart.yaml +++ b/charts/metak8sappscodecom-menu-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"menus"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Menu Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-menu-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/metak8sappscodecom-menu-editor/README.md b/charts/metak8sappscodecom-menu-editor/README.md index ba419155a2..e0e7ad7215 100644 --- a/charts/metak8sappscodecom-menu-editor/README.md +++ b/charts/metak8sappscodecom-menu-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-menu-editor --version=v0.38.0 -$ helm upgrade -i metak8sappscodecom-menu-editor appscode/metak8sappscodecom-menu-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/metak8sappscodecom-menu-editor --version=v0.39.0 +$ helm upgrade -i metak8sappscodecom-menu-editor appscode/metak8sappscodecom-menu-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Menu Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `metak8sappscodecom-menu-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-menu-editor appscode/metak8sappscodecom-menu-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i metak8sappscodecom-menu-editor appscode/metak8sappscodecom-menu-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Menu Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-menu-editor appscode/metak8sappscodecom-menu-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-menu-editor appscode/metak8sappscodecom-menu-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-menu-editor appscode/metak8sappscodecom-menu-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-menu-editor appscode/metak8sappscodecom-menu-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-menuoutline-editor/Chart.yaml b/charts/metak8sappscodecom-menuoutline-editor/Chart.yaml index b569912a0a..4b57ea68e1 100644 --- a/charts/metak8sappscodecom-menuoutline-editor/Chart.yaml +++ b/charts/metak8sappscodecom-menuoutline-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"menuoutlines"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MenuOutline Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-menuoutline-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/metak8sappscodecom-menuoutline-editor/README.md b/charts/metak8sappscodecom-menuoutline-editor/README.md index 765fe84ffe..281e088751 100644 --- a/charts/metak8sappscodecom-menuoutline-editor/README.md +++ b/charts/metak8sappscodecom-menuoutline-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-menuoutline-editor --version=v0.38.0 -$ helm upgrade -i metak8sappscodecom-menuoutline-editor appscode/metak8sappscodecom-menuoutline-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/metak8sappscodecom-menuoutline-editor --version=v0.39.0 +$ helm upgrade -i metak8sappscodecom-menuoutline-editor appscode/metak8sappscodecom-menuoutline-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MenuOutline Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `metak8sappscodecom-menuoutline-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-menuoutline-editor appscode/metak8sappscodecom-menuoutline-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i metak8sappscodecom-menuoutline-editor appscode/metak8sappscodecom-menuoutline-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MenuOutline Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-menuoutline-editor appscode/metak8sappscodecom-menuoutline-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-menuoutline-editor appscode/metak8sappscodecom-menuoutline-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-menuoutline-editor appscode/metak8sappscodecom-menuoutline-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-menuoutline-editor appscode/metak8sappscodecom-menuoutline-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-project-editor/Chart.yaml b/charts/metak8sappscodecom-project-editor/Chart.yaml index 3b82ae9ebd..4d0ccf5d8e 100644 --- a/charts/metak8sappscodecom-project-editor/Chart.yaml +++ b/charts/metak8sappscodecom-project-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"projects"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Project Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-project-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/metak8sappscodecom-project-editor/README.md b/charts/metak8sappscodecom-project-editor/README.md index bbae13488b..2249d9ae58 100644 --- a/charts/metak8sappscodecom-project-editor/README.md +++ b/charts/metak8sappscodecom-project-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-project-editor --version=v0.38.0 -$ helm upgrade -i metak8sappscodecom-project-editor appscode/metak8sappscodecom-project-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/metak8sappscodecom-project-editor --version=v0.39.0 +$ helm upgrade -i metak8sappscodecom-project-editor appscode/metak8sappscodecom-project-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Project Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `metak8sappscodecom-project-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-project-editor appscode/metak8sappscodecom-project-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i metak8sappscodecom-project-editor appscode/metak8sappscodecom-project-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Project Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-project-editor appscode/metak8sappscodecom-project-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-project-editor appscode/metak8sappscodecom-project-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-project-editor appscode/metak8sappscodecom-project-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-project-editor appscode/metak8sappscodecom-project-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-resourceblockdefinition-editor/Chart.yaml b/charts/metak8sappscodecom-resourceblockdefinition-editor/Chart.yaml index e700ae9a25..e3a99b8531 100644 --- a/charts/metak8sappscodecom-resourceblockdefinition-editor/Chart.yaml +++ b/charts/metak8sappscodecom-resourceblockdefinition-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"resourceblockdefinitions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ResourceBlockDefinition Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-resourceblockdefinition-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/metak8sappscodecom-resourceblockdefinition-editor/README.md b/charts/metak8sappscodecom-resourceblockdefinition-editor/README.md index f256b8dd72..ecdab435eb 100644 --- a/charts/metak8sappscodecom-resourceblockdefinition-editor/README.md +++ b/charts/metak8sappscodecom-resourceblockdefinition-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-resourceblockdefinition-editor --version=v0.38.0 -$ helm upgrade -i metak8sappscodecom-resourceblockdefinition-editor appscode/metak8sappscodecom-resourceblockdefinition-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/metak8sappscodecom-resourceblockdefinition-editor --version=v0.39.0 +$ helm upgrade -i metak8sappscodecom-resourceblockdefinition-editor appscode/metak8sappscodecom-resourceblockdefinition-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceBlockDefinition Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `metak8sappscodecom-resourceblockdefinition-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-resourceblockdefinition-editor appscode/metak8sappscodecom-resourceblockdefinition-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i metak8sappscodecom-resourceblockdefinition-editor appscode/metak8sappscodecom-resourceblockdefinition-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ResourceBlockDefinition Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourceblockdefinition-editor appscode/metak8sappscodecom-resourceblockdefinition-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-resourceblockdefinition-editor appscode/metak8sappscodecom-resourceblockdefinition-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourceblockdefinition-editor appscode/metak8sappscodecom-resourceblockdefinition-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-resourceblockdefinition-editor appscode/metak8sappscodecom-resourceblockdefinition-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-resourcecalculator-editor/Chart.yaml b/charts/metak8sappscodecom-resourcecalculator-editor/Chart.yaml index 9c5f2f4cd8..bf8420c372 100644 --- a/charts/metak8sappscodecom-resourcecalculator-editor/Chart.yaml +++ b/charts/metak8sappscodecom-resourcecalculator-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"resourcecalculators"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ResourceCalculator Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-resourcecalculator-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/metak8sappscodecom-resourcecalculator-editor/README.md b/charts/metak8sappscodecom-resourcecalculator-editor/README.md index 4a18c62615..16cd1cb36b 100644 --- a/charts/metak8sappscodecom-resourcecalculator-editor/README.md +++ b/charts/metak8sappscodecom-resourcecalculator-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-resourcecalculator-editor --version=v0.38.0 -$ helm upgrade -i metak8sappscodecom-resourcecalculator-editor appscode/metak8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/metak8sappscodecom-resourcecalculator-editor --version=v0.39.0 +$ helm upgrade -i metak8sappscodecom-resourcecalculator-editor appscode/metak8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceCalculator Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `metak8sappscodecom-resourcecalculator-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-resourcecalculator-editor appscode/metak8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i metak8sappscodecom-resourcecalculator-editor appscode/metak8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ResourceCalculator Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcecalculator-editor appscode/metak8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-resourcecalculator-editor appscode/metak8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcecalculator-editor appscode/metak8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-resourcecalculator-editor appscode/metak8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-resourcedashboard-editor/Chart.yaml b/charts/metak8sappscodecom-resourcedashboard-editor/Chart.yaml index 4aa1ad53e8..801a458461 100644 --- a/charts/metak8sappscodecom-resourcedashboard-editor/Chart.yaml +++ b/charts/metak8sappscodecom-resourcedashboard-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"resourcedashboards"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ResourceDashboard Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-resourcedashboard-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/metak8sappscodecom-resourcedashboard-editor/README.md b/charts/metak8sappscodecom-resourcedashboard-editor/README.md index bb90de29a4..3ee00ffc8b 100644 --- a/charts/metak8sappscodecom-resourcedashboard-editor/README.md +++ b/charts/metak8sappscodecom-resourcedashboard-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-resourcedashboard-editor --version=v0.38.0 -$ helm upgrade -i metak8sappscodecom-resourcedashboard-editor appscode/metak8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/metak8sappscodecom-resourcedashboard-editor --version=v0.39.0 +$ helm upgrade -i metak8sappscodecom-resourcedashboard-editor appscode/metak8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceDashboard Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `metak8sappscodecom-resourcedashboard-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-resourcedashboard-editor appscode/metak8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i metak8sappscodecom-resourcedashboard-editor appscode/metak8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ResourceDashboard Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcedashboard-editor appscode/metak8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-resourcedashboard-editor appscode/metak8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcedashboard-editor appscode/metak8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-resourcedashboard-editor appscode/metak8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-resourcedescriptor-editor/Chart.yaml b/charts/metak8sappscodecom-resourcedescriptor-editor/Chart.yaml index 849134747c..9141198f29 100644 --- a/charts/metak8sappscodecom-resourcedescriptor-editor/Chart.yaml +++ b/charts/metak8sappscodecom-resourcedescriptor-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"resourcedescriptors"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ResourceDescriptor Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-resourcedescriptor-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/metak8sappscodecom-resourcedescriptor-editor/README.md b/charts/metak8sappscodecom-resourcedescriptor-editor/README.md index b1c8f442fe..acde91922a 100644 --- a/charts/metak8sappscodecom-resourcedescriptor-editor/README.md +++ b/charts/metak8sappscodecom-resourcedescriptor-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-resourcedescriptor-editor --version=v0.38.0 -$ helm upgrade -i metak8sappscodecom-resourcedescriptor-editor appscode/metak8sappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/metak8sappscodecom-resourcedescriptor-editor --version=v0.39.0 +$ helm upgrade -i metak8sappscodecom-resourcedescriptor-editor appscode/metak8sappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceDescriptor Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `metak8sappscodecom-resourcedescriptor-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-resourcedescriptor-editor appscode/metak8sappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i metak8sappscodecom-resourcedescriptor-editor appscode/metak8sappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ResourceDescriptor Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcedescriptor-editor appscode/metak8sappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-resourcedescriptor-editor appscode/metak8sappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcedescriptor-editor appscode/metak8sappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-resourcedescriptor-editor appscode/metak8sappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-resourceeditor-editor/Chart.yaml b/charts/metak8sappscodecom-resourceeditor-editor/Chart.yaml index 0854ebbea7..ded94befb6 100644 --- a/charts/metak8sappscodecom-resourceeditor-editor/Chart.yaml +++ b/charts/metak8sappscodecom-resourceeditor-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"resourceeditors"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ResourceEditor Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-resourceeditor-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/metak8sappscodecom-resourceeditor-editor/README.md b/charts/metak8sappscodecom-resourceeditor-editor/README.md index 258ebcd168..612b5032d5 100644 --- a/charts/metak8sappscodecom-resourceeditor-editor/README.md +++ b/charts/metak8sappscodecom-resourceeditor-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-resourceeditor-editor --version=v0.38.0 -$ helm upgrade -i metak8sappscodecom-resourceeditor-editor appscode/metak8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/metak8sappscodecom-resourceeditor-editor --version=v0.39.0 +$ helm upgrade -i metak8sappscodecom-resourceeditor-editor appscode/metak8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceEditor Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `metak8sappscodecom-resourceeditor-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-resourceeditor-editor appscode/metak8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i metak8sappscodecom-resourceeditor-editor appscode/metak8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ResourceEditor Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourceeditor-editor appscode/metak8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-resourceeditor-editor appscode/metak8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourceeditor-editor appscode/metak8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-resourceeditor-editor appscode/metak8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-resourcelayout-editor/Chart.yaml b/charts/metak8sappscodecom-resourcelayout-editor/Chart.yaml index 09202e18ac..f7459d1fe5 100644 --- a/charts/metak8sappscodecom-resourcelayout-editor/Chart.yaml +++ b/charts/metak8sappscodecom-resourcelayout-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"resourcelayouts"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ResourceLayout Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-resourcelayout-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/metak8sappscodecom-resourcelayout-editor/README.md b/charts/metak8sappscodecom-resourcelayout-editor/README.md index 7128ba1d38..f12384601d 100644 --- a/charts/metak8sappscodecom-resourcelayout-editor/README.md +++ b/charts/metak8sappscodecom-resourcelayout-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-resourcelayout-editor --version=v0.38.0 -$ helm upgrade -i metak8sappscodecom-resourcelayout-editor appscode/metak8sappscodecom-resourcelayout-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/metak8sappscodecom-resourcelayout-editor --version=v0.39.0 +$ helm upgrade -i metak8sappscodecom-resourcelayout-editor appscode/metak8sappscodecom-resourcelayout-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceLayout Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `metak8sappscodecom-resourcelayout-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-resourcelayout-editor appscode/metak8sappscodecom-resourcelayout-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i metak8sappscodecom-resourcelayout-editor appscode/metak8sappscodecom-resourcelayout-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ResourceLayout Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcelayout-editor appscode/metak8sappscodecom-resourcelayout-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-resourcelayout-editor appscode/metak8sappscodecom-resourcelayout-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcelayout-editor appscode/metak8sappscodecom-resourcelayout-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-resourcelayout-editor appscode/metak8sappscodecom-resourcelayout-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-resourcemanifests-editor/Chart.yaml b/charts/metak8sappscodecom-resourcemanifests-editor/Chart.yaml index a567c22c3d..d8d18b44aa 100644 --- a/charts/metak8sappscodecom-resourcemanifests-editor/Chart.yaml +++ b/charts/metak8sappscodecom-resourcemanifests-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"resourcemanifests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ResourceManifests Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-resourcemanifests-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/metak8sappscodecom-resourcemanifests-editor/README.md b/charts/metak8sappscodecom-resourcemanifests-editor/README.md index 94cf301069..d7c0df3e83 100644 --- a/charts/metak8sappscodecom-resourcemanifests-editor/README.md +++ b/charts/metak8sappscodecom-resourcemanifests-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-resourcemanifests-editor --version=v0.38.0 -$ helm upgrade -i metak8sappscodecom-resourcemanifests-editor appscode/metak8sappscodecom-resourcemanifests-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/metak8sappscodecom-resourcemanifests-editor --version=v0.39.0 +$ helm upgrade -i metak8sappscodecom-resourcemanifests-editor appscode/metak8sappscodecom-resourcemanifests-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceManifests Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `metak8sappscodecom-resourcemanifests-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-resourcemanifests-editor appscode/metak8sappscodecom-resourcemanifests-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i metak8sappscodecom-resourcemanifests-editor appscode/metak8sappscodecom-resourcemanifests-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ResourceManifests Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcemanifests-editor appscode/metak8sappscodecom-resourcemanifests-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-resourcemanifests-editor appscode/metak8sappscodecom-resourcemanifests-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcemanifests-editor appscode/metak8sappscodecom-resourcemanifests-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-resourcemanifests-editor appscode/metak8sappscodecom-resourcemanifests-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-resourceoutline-editor/Chart.yaml b/charts/metak8sappscodecom-resourceoutline-editor/Chart.yaml index 219078f528..b8b4bfbbe1 100644 --- a/charts/metak8sappscodecom-resourceoutline-editor/Chart.yaml +++ b/charts/metak8sappscodecom-resourceoutline-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"resourceoutlines"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ResourceOutline Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-resourceoutline-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/metak8sappscodecom-resourceoutline-editor/README.md b/charts/metak8sappscodecom-resourceoutline-editor/README.md index 871ff8df66..30ac4d41f9 100644 --- a/charts/metak8sappscodecom-resourceoutline-editor/README.md +++ b/charts/metak8sappscodecom-resourceoutline-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-resourceoutline-editor --version=v0.38.0 -$ helm upgrade -i metak8sappscodecom-resourceoutline-editor appscode/metak8sappscodecom-resourceoutline-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/metak8sappscodecom-resourceoutline-editor --version=v0.39.0 +$ helm upgrade -i metak8sappscodecom-resourceoutline-editor appscode/metak8sappscodecom-resourceoutline-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceOutline Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `metak8sappscodecom-resourceoutline-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-resourceoutline-editor appscode/metak8sappscodecom-resourceoutline-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i metak8sappscodecom-resourceoutline-editor appscode/metak8sappscodecom-resourceoutline-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ResourceOutline Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourceoutline-editor appscode/metak8sappscodecom-resourceoutline-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-resourceoutline-editor appscode/metak8sappscodecom-resourceoutline-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourceoutline-editor appscode/metak8sappscodecom-resourceoutline-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-resourceoutline-editor appscode/metak8sappscodecom-resourceoutline-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-resourceoutlinefilter-editor/Chart.yaml b/charts/metak8sappscodecom-resourceoutlinefilter-editor/Chart.yaml index 2263075d78..250a4048b1 100644 --- a/charts/metak8sappscodecom-resourceoutlinefilter-editor/Chart.yaml +++ b/charts/metak8sappscodecom-resourceoutlinefilter-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"resourceoutlinefilters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ResourceOutlineFilter Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-resourceoutlinefilter-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/metak8sappscodecom-resourceoutlinefilter-editor/README.md b/charts/metak8sappscodecom-resourceoutlinefilter-editor/README.md index 1897b501c5..145b61accc 100644 --- a/charts/metak8sappscodecom-resourceoutlinefilter-editor/README.md +++ b/charts/metak8sappscodecom-resourceoutlinefilter-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-resourceoutlinefilter-editor --version=v0.38.0 -$ helm upgrade -i metak8sappscodecom-resourceoutlinefilter-editor appscode/metak8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/metak8sappscodecom-resourceoutlinefilter-editor --version=v0.39.0 +$ helm upgrade -i metak8sappscodecom-resourceoutlinefilter-editor appscode/metak8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceOutlineFilter Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `metak8sappscodecom-resourceoutlinefilter-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-resourceoutlinefilter-editor appscode/metak8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i metak8sappscodecom-resourceoutlinefilter-editor appscode/metak8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ResourceOutlineFilter Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourceoutlinefilter-editor appscode/metak8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-resourceoutlinefilter-editor appscode/metak8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourceoutlinefilter-editor appscode/metak8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-resourceoutlinefilter-editor appscode/metak8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-resourcetabledefinition-editor/Chart.yaml b/charts/metak8sappscodecom-resourcetabledefinition-editor/Chart.yaml index 7015db2774..605fa96841 100644 --- a/charts/metak8sappscodecom-resourcetabledefinition-editor/Chart.yaml +++ b/charts/metak8sappscodecom-resourcetabledefinition-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"resourcetabledefinitions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ResourceTableDefinition Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-resourcetabledefinition-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/metak8sappscodecom-resourcetabledefinition-editor/README.md b/charts/metak8sappscodecom-resourcetabledefinition-editor/README.md index 833300bd1b..8491a987f3 100644 --- a/charts/metak8sappscodecom-resourcetabledefinition-editor/README.md +++ b/charts/metak8sappscodecom-resourcetabledefinition-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-resourcetabledefinition-editor --version=v0.38.0 -$ helm upgrade -i metak8sappscodecom-resourcetabledefinition-editor appscode/metak8sappscodecom-resourcetabledefinition-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/metak8sappscodecom-resourcetabledefinition-editor --version=v0.39.0 +$ helm upgrade -i metak8sappscodecom-resourcetabledefinition-editor appscode/metak8sappscodecom-resourcetabledefinition-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceTableDefinition Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `metak8sappscodecom-resourcetabledefinition-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-resourcetabledefinition-editor appscode/metak8sappscodecom-resourcetabledefinition-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i metak8sappscodecom-resourcetabledefinition-editor appscode/metak8sappscodecom-resourcetabledefinition-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ResourceTableDefinition Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcetabledefinition-editor appscode/metak8sappscodecom-resourcetabledefinition-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-resourcetabledefinition-editor appscode/metak8sappscodecom-resourcetabledefinition-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcetabledefinition-editor appscode/metak8sappscodecom-resourcetabledefinition-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-resourcetabledefinition-editor appscode/metak8sappscodecom-resourcetabledefinition-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/metricsappscodecom-metricsconfiguration-editor/Chart.yaml b/charts/metricsappscodecom-metricsconfiguration-editor/Chart.yaml index e66c06795c..d812f5d6af 100644 --- a/charts/metricsappscodecom-metricsconfiguration-editor/Chart.yaml +++ b/charts/metricsappscodecom-metricsconfiguration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"metrics.appscode.com","version":"v1alpha1","resource":"metricsconfigurations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MetricsConfiguration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metricsappscodecom-metricsconfiguration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/metricsappscodecom-metricsconfiguration-editor/README.md b/charts/metricsappscodecom-metricsconfiguration-editor/README.md index 0c4ae0082f..af9c016047 100644 --- a/charts/metricsappscodecom-metricsconfiguration-editor/README.md +++ b/charts/metricsappscodecom-metricsconfiguration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metricsappscodecom-metricsconfiguration-editor --version=v0.38.0 -$ helm upgrade -i metricsappscodecom-metricsconfiguration-editor appscode/metricsappscodecom-metricsconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/metricsappscodecom-metricsconfiguration-editor --version=v0.39.0 +$ helm upgrade -i metricsappscodecom-metricsconfiguration-editor appscode/metricsappscodecom-metricsconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MetricsConfiguration Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `metricsappscodecom-metricsconfiguration-editor`: ```bash -$ helm upgrade -i metricsappscodecom-metricsconfiguration-editor appscode/metricsappscodecom-metricsconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i metricsappscodecom-metricsconfiguration-editor appscode/metricsappscodecom-metricsconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MetricsConfiguration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metricsappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metricsappscodecom-metricsconfiguration-editor appscode/metricsappscodecom-metricsconfiguration-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=metrics.appscode.com/v1alpha1 +$ helm upgrade -i metricsappscodecom-metricsconfiguration-editor appscode/metricsappscodecom-metricsconfiguration-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=metrics.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metricsappscodecom-metricsconfiguration-editor appscode/metricsappscodecom-metricsconfiguration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i metricsappscodecom-metricsconfiguration-editor appscode/metricsappscodecom-metricsconfiguration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/migratorkubedbcom-migrator-editor/Chart.yaml b/charts/migratorkubedbcom-migrator-editor/Chart.yaml index ca83b3f597..b1cd308e4d 100644 --- a/charts/migratorkubedbcom-migrator-editor/Chart.yaml +++ b/charts/migratorkubedbcom-migrator-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"migrator.kubedb.com","version":"v1alpha1","resource":"migrators"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Migrator Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: migratorkubedbcom-migrator-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/migratorkubedbcom-migrator-editor/README.md b/charts/migratorkubedbcom-migrator-editor/README.md index b961d329b5..b6b46d44aa 100644 --- a/charts/migratorkubedbcom-migrator-editor/README.md +++ b/charts/migratorkubedbcom-migrator-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/migratorkubedbcom-migrator-editor --version=v0.38.0 -$ helm upgrade -i migratorkubedbcom-migrator-editor appscode/migratorkubedbcom-migrator-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/migratorkubedbcom-migrator-editor --version=v0.39.0 +$ helm upgrade -i migratorkubedbcom-migrator-editor appscode/migratorkubedbcom-migrator-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Migrator Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `migratorkubedbcom-migrator-editor`: ```bash -$ helm upgrade -i migratorkubedbcom-migrator-editor appscode/migratorkubedbcom-migrator-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i migratorkubedbcom-migrator-editor appscode/migratorkubedbcom-migrator-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Migrator Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `migratorkubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i migratorkubedbcom-migrator-editor appscode/migratorkubedbcom-migrator-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=migrator.kubedb.com/v1alpha1 +$ helm upgrade -i migratorkubedbcom-migrator-editor appscode/migratorkubedbcom-migrator-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=migrator.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i migratorkubedbcom-migrator-editor appscode/migratorkubedbcom-migrator-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i migratorkubedbcom-migrator-editor appscode/migratorkubedbcom-migrator-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/monitoringcoreoscom-alertmanager-editor/Chart.yaml b/charts/monitoringcoreoscom-alertmanager-editor/Chart.yaml index 857accc519..9d0bf9267c 100644 --- a/charts/monitoringcoreoscom-alertmanager-editor/Chart.yaml +++ b/charts/monitoringcoreoscom-alertmanager-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.coreos.com","version":"v1","resource":"alertmanagers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Alertmanager Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringcoreoscom-alertmanager-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/monitoringcoreoscom-alertmanager-editor/README.md b/charts/monitoringcoreoscom-alertmanager-editor/README.md index 26ceb3bd53..45b87be7d1 100644 --- a/charts/monitoringcoreoscom-alertmanager-editor/README.md +++ b/charts/monitoringcoreoscom-alertmanager-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringcoreoscom-alertmanager-editor --version=v0.38.0 -$ helm upgrade -i monitoringcoreoscom-alertmanager-editor appscode/monitoringcoreoscom-alertmanager-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/monitoringcoreoscom-alertmanager-editor --version=v0.39.0 +$ helm upgrade -i monitoringcoreoscom-alertmanager-editor appscode/monitoringcoreoscom-alertmanager-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Alertmanager Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `monitoringcoreoscom-alertmanager-editor`: ```bash -$ helm upgrade -i monitoringcoreoscom-alertmanager-editor appscode/monitoringcoreoscom-alertmanager-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i monitoringcoreoscom-alertmanager-editor appscode/monitoringcoreoscom-alertmanager-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Alertmanager Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringcoreosco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-alertmanager-editor appscode/monitoringcoreoscom-alertmanager-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=monitoring.coreos.com/v1 +$ helm upgrade -i monitoringcoreoscom-alertmanager-editor appscode/monitoringcoreoscom-alertmanager-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=monitoring.coreos.com/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-alertmanager-editor appscode/monitoringcoreoscom-alertmanager-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i monitoringcoreoscom-alertmanager-editor appscode/monitoringcoreoscom-alertmanager-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/monitoringcoreoscom-alertmanagerconfig-editor/Chart.yaml b/charts/monitoringcoreoscom-alertmanagerconfig-editor/Chart.yaml index 9ae0f0e48e..f5f480fec4 100644 --- a/charts/monitoringcoreoscom-alertmanagerconfig-editor/Chart.yaml +++ b/charts/monitoringcoreoscom-alertmanagerconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.coreos.com","version":"v1alpha1","resource":"alertmanagerconfigs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AlertmanagerConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringcoreoscom-alertmanagerconfig-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/monitoringcoreoscom-alertmanagerconfig-editor/README.md b/charts/monitoringcoreoscom-alertmanagerconfig-editor/README.md index 04da180f78..8223cc1f2b 100644 --- a/charts/monitoringcoreoscom-alertmanagerconfig-editor/README.md +++ b/charts/monitoringcoreoscom-alertmanagerconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringcoreoscom-alertmanagerconfig-editor --version=v0.38.0 -$ helm upgrade -i monitoringcoreoscom-alertmanagerconfig-editor appscode/monitoringcoreoscom-alertmanagerconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/monitoringcoreoscom-alertmanagerconfig-editor --version=v0.39.0 +$ helm upgrade -i monitoringcoreoscom-alertmanagerconfig-editor appscode/monitoringcoreoscom-alertmanagerconfig-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AlertmanagerConfig Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `monitoringcoreoscom-alertmanagerconfig-editor`: ```bash -$ helm upgrade -i monitoringcoreoscom-alertmanagerconfig-editor appscode/monitoringcoreoscom-alertmanagerconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i monitoringcoreoscom-alertmanagerconfig-editor appscode/monitoringcoreoscom-alertmanagerconfig-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AlertmanagerConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringcoreosco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-alertmanagerconfig-editor appscode/monitoringcoreoscom-alertmanagerconfig-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=monitoring.coreos.com/v1alpha1 +$ helm upgrade -i monitoringcoreoscom-alertmanagerconfig-editor appscode/monitoringcoreoscom-alertmanagerconfig-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=monitoring.coreos.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-alertmanagerconfig-editor appscode/monitoringcoreoscom-alertmanagerconfig-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i monitoringcoreoscom-alertmanagerconfig-editor appscode/monitoringcoreoscom-alertmanagerconfig-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/monitoringcoreoscom-podmonitor-editor/Chart.yaml b/charts/monitoringcoreoscom-podmonitor-editor/Chart.yaml index d9f40d59e3..2956ced32f 100644 --- a/charts/monitoringcoreoscom-podmonitor-editor/Chart.yaml +++ b/charts/monitoringcoreoscom-podmonitor-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.coreos.com","version":"v1","resource":"podmonitors"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PodMonitor Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringcoreoscom-podmonitor-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/monitoringcoreoscom-podmonitor-editor/README.md b/charts/monitoringcoreoscom-podmonitor-editor/README.md index d9270e8119..fee9715a34 100644 --- a/charts/monitoringcoreoscom-podmonitor-editor/README.md +++ b/charts/monitoringcoreoscom-podmonitor-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringcoreoscom-podmonitor-editor --version=v0.38.0 -$ helm upgrade -i monitoringcoreoscom-podmonitor-editor appscode/monitoringcoreoscom-podmonitor-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/monitoringcoreoscom-podmonitor-editor --version=v0.39.0 +$ helm upgrade -i monitoringcoreoscom-podmonitor-editor appscode/monitoringcoreoscom-podmonitor-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PodMonitor Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `monitoringcoreoscom-podmonitor-editor`: ```bash -$ helm upgrade -i monitoringcoreoscom-podmonitor-editor appscode/monitoringcoreoscom-podmonitor-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i monitoringcoreoscom-podmonitor-editor appscode/monitoringcoreoscom-podmonitor-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PodMonitor Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringcoreosco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-podmonitor-editor appscode/monitoringcoreoscom-podmonitor-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=monitoring.coreos.com/v1 +$ helm upgrade -i monitoringcoreoscom-podmonitor-editor appscode/monitoringcoreoscom-podmonitor-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=monitoring.coreos.com/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-podmonitor-editor appscode/monitoringcoreoscom-podmonitor-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i monitoringcoreoscom-podmonitor-editor appscode/monitoringcoreoscom-podmonitor-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/monitoringcoreoscom-probe-editor/Chart.yaml b/charts/monitoringcoreoscom-probe-editor/Chart.yaml index 07798921a5..56d4a610e4 100644 --- a/charts/monitoringcoreoscom-probe-editor/Chart.yaml +++ b/charts/monitoringcoreoscom-probe-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.coreos.com","version":"v1","resource":"probes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Probe Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringcoreoscom-probe-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/monitoringcoreoscom-probe-editor/README.md b/charts/monitoringcoreoscom-probe-editor/README.md index 6e5bf1d9a2..fcc7a0d26f 100644 --- a/charts/monitoringcoreoscom-probe-editor/README.md +++ b/charts/monitoringcoreoscom-probe-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringcoreoscom-probe-editor --version=v0.38.0 -$ helm upgrade -i monitoringcoreoscom-probe-editor appscode/monitoringcoreoscom-probe-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/monitoringcoreoscom-probe-editor --version=v0.39.0 +$ helm upgrade -i monitoringcoreoscom-probe-editor appscode/monitoringcoreoscom-probe-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Probe Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `monitoringcoreoscom-probe-editor`: ```bash -$ helm upgrade -i monitoringcoreoscom-probe-editor appscode/monitoringcoreoscom-probe-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i monitoringcoreoscom-probe-editor appscode/monitoringcoreoscom-probe-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Probe Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringcoreosco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-probe-editor appscode/monitoringcoreoscom-probe-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=monitoring.coreos.com/v1 +$ helm upgrade -i monitoringcoreoscom-probe-editor appscode/monitoringcoreoscom-probe-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=monitoring.coreos.com/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-probe-editor appscode/monitoringcoreoscom-probe-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i monitoringcoreoscom-probe-editor appscode/monitoringcoreoscom-probe-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/monitoringcoreoscom-prometheus-editor/Chart.yaml b/charts/monitoringcoreoscom-prometheus-editor/Chart.yaml index 3cbf210a43..55de7f0dd9 100644 --- a/charts/monitoringcoreoscom-prometheus-editor/Chart.yaml +++ b/charts/monitoringcoreoscom-prometheus-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.coreos.com","version":"v1","resource":"prometheuses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Prometheus Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringcoreoscom-prometheus-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/monitoringcoreoscom-prometheus-editor/README.md b/charts/monitoringcoreoscom-prometheus-editor/README.md index 8690b98948..712d301f8b 100644 --- a/charts/monitoringcoreoscom-prometheus-editor/README.md +++ b/charts/monitoringcoreoscom-prometheus-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringcoreoscom-prometheus-editor --version=v0.38.0 -$ helm upgrade -i monitoringcoreoscom-prometheus-editor appscode/monitoringcoreoscom-prometheus-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/monitoringcoreoscom-prometheus-editor --version=v0.39.0 +$ helm upgrade -i monitoringcoreoscom-prometheus-editor appscode/monitoringcoreoscom-prometheus-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Prometheus Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `monitoringcoreoscom-prometheus-editor`: ```bash -$ helm upgrade -i monitoringcoreoscom-prometheus-editor appscode/monitoringcoreoscom-prometheus-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i monitoringcoreoscom-prometheus-editor appscode/monitoringcoreoscom-prometheus-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Prometheus Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringcoreosco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-prometheus-editor appscode/monitoringcoreoscom-prometheus-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=monitoring.coreos.com/v1 +$ helm upgrade -i monitoringcoreoscom-prometheus-editor appscode/monitoringcoreoscom-prometheus-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=monitoring.coreos.com/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-prometheus-editor appscode/monitoringcoreoscom-prometheus-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i monitoringcoreoscom-prometheus-editor appscode/monitoringcoreoscom-prometheus-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/monitoringcoreoscom-prometheusagent-editor/Chart.yaml b/charts/monitoringcoreoscom-prometheusagent-editor/Chart.yaml index fdd5554734..fb775de6b8 100644 --- a/charts/monitoringcoreoscom-prometheusagent-editor/Chart.yaml +++ b/charts/monitoringcoreoscom-prometheusagent-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.coreos.com","version":"v1alpha1","resource":"prometheusagents"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PrometheusAgent Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringcoreoscom-prometheusagent-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/monitoringcoreoscom-prometheusagent-editor/README.md b/charts/monitoringcoreoscom-prometheusagent-editor/README.md index ec92d68f2c..ceea86d2b0 100644 --- a/charts/monitoringcoreoscom-prometheusagent-editor/README.md +++ b/charts/monitoringcoreoscom-prometheusagent-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringcoreoscom-prometheusagent-editor --version=v0.38.0 -$ helm upgrade -i monitoringcoreoscom-prometheusagent-editor appscode/monitoringcoreoscom-prometheusagent-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/monitoringcoreoscom-prometheusagent-editor --version=v0.39.0 +$ helm upgrade -i monitoringcoreoscom-prometheusagent-editor appscode/monitoringcoreoscom-prometheusagent-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PrometheusAgent Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `monitoringcoreoscom-prometheusagent-editor`: ```bash -$ helm upgrade -i monitoringcoreoscom-prometheusagent-editor appscode/monitoringcoreoscom-prometheusagent-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i monitoringcoreoscom-prometheusagent-editor appscode/monitoringcoreoscom-prometheusagent-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PrometheusAgent Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringcoreosco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-prometheusagent-editor appscode/monitoringcoreoscom-prometheusagent-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=monitoring.coreos.com/v1alpha1 +$ helm upgrade -i monitoringcoreoscom-prometheusagent-editor appscode/monitoringcoreoscom-prometheusagent-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=monitoring.coreos.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-prometheusagent-editor appscode/monitoringcoreoscom-prometheusagent-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i monitoringcoreoscom-prometheusagent-editor appscode/monitoringcoreoscom-prometheusagent-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/monitoringcoreoscom-prometheusrule-editor/Chart.yaml b/charts/monitoringcoreoscom-prometheusrule-editor/Chart.yaml index 42cde00bfd..48426b7a2d 100644 --- a/charts/monitoringcoreoscom-prometheusrule-editor/Chart.yaml +++ b/charts/monitoringcoreoscom-prometheusrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.coreos.com","version":"v1","resource":"prometheusrules"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PrometheusRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringcoreoscom-prometheusrule-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/monitoringcoreoscom-prometheusrule-editor/README.md b/charts/monitoringcoreoscom-prometheusrule-editor/README.md index 0589dc8da8..90be3cbcaa 100644 --- a/charts/monitoringcoreoscom-prometheusrule-editor/README.md +++ b/charts/monitoringcoreoscom-prometheusrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringcoreoscom-prometheusrule-editor --version=v0.38.0 -$ helm upgrade -i monitoringcoreoscom-prometheusrule-editor appscode/monitoringcoreoscom-prometheusrule-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/monitoringcoreoscom-prometheusrule-editor --version=v0.39.0 +$ helm upgrade -i monitoringcoreoscom-prometheusrule-editor appscode/monitoringcoreoscom-prometheusrule-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PrometheusRule Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `monitoringcoreoscom-prometheusrule-editor`: ```bash -$ helm upgrade -i monitoringcoreoscom-prometheusrule-editor appscode/monitoringcoreoscom-prometheusrule-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i monitoringcoreoscom-prometheusrule-editor appscode/monitoringcoreoscom-prometheusrule-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PrometheusRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringcoreosco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-prometheusrule-editor appscode/monitoringcoreoscom-prometheusrule-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=monitoring.coreos.com/v1 +$ helm upgrade -i monitoringcoreoscom-prometheusrule-editor appscode/monitoringcoreoscom-prometheusrule-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=monitoring.coreos.com/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-prometheusrule-editor appscode/monitoringcoreoscom-prometheusrule-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i monitoringcoreoscom-prometheusrule-editor appscode/monitoringcoreoscom-prometheusrule-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/monitoringcoreoscom-scrapeconfig-editor/Chart.yaml b/charts/monitoringcoreoscom-scrapeconfig-editor/Chart.yaml index 28a40acfa7..872fb81c9b 100644 --- a/charts/monitoringcoreoscom-scrapeconfig-editor/Chart.yaml +++ b/charts/monitoringcoreoscom-scrapeconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.coreos.com","version":"v1alpha1","resource":"scrapeconfigs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ScrapeConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringcoreoscom-scrapeconfig-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/monitoringcoreoscom-scrapeconfig-editor/README.md b/charts/monitoringcoreoscom-scrapeconfig-editor/README.md index f8597f5906..9596c38e41 100644 --- a/charts/monitoringcoreoscom-scrapeconfig-editor/README.md +++ b/charts/monitoringcoreoscom-scrapeconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringcoreoscom-scrapeconfig-editor --version=v0.38.0 -$ helm upgrade -i monitoringcoreoscom-scrapeconfig-editor appscode/monitoringcoreoscom-scrapeconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/monitoringcoreoscom-scrapeconfig-editor --version=v0.39.0 +$ helm upgrade -i monitoringcoreoscom-scrapeconfig-editor appscode/monitoringcoreoscom-scrapeconfig-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ScrapeConfig Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `monitoringcoreoscom-scrapeconfig-editor`: ```bash -$ helm upgrade -i monitoringcoreoscom-scrapeconfig-editor appscode/monitoringcoreoscom-scrapeconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i monitoringcoreoscom-scrapeconfig-editor appscode/monitoringcoreoscom-scrapeconfig-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ScrapeConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringcoreosco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-scrapeconfig-editor appscode/monitoringcoreoscom-scrapeconfig-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=monitoring.coreos.com/v1alpha1 +$ helm upgrade -i monitoringcoreoscom-scrapeconfig-editor appscode/monitoringcoreoscom-scrapeconfig-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=monitoring.coreos.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-scrapeconfig-editor appscode/monitoringcoreoscom-scrapeconfig-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i monitoringcoreoscom-scrapeconfig-editor appscode/monitoringcoreoscom-scrapeconfig-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/monitoringcoreoscom-servicemonitor-editor/Chart.yaml b/charts/monitoringcoreoscom-servicemonitor-editor/Chart.yaml index 621f818920..12e9284f21 100644 --- a/charts/monitoringcoreoscom-servicemonitor-editor/Chart.yaml +++ b/charts/monitoringcoreoscom-servicemonitor-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.coreos.com","version":"v1","resource":"servicemonitors"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ServiceMonitor Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringcoreoscom-servicemonitor-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/monitoringcoreoscom-servicemonitor-editor/README.md b/charts/monitoringcoreoscom-servicemonitor-editor/README.md index 258be41c9b..a5b3a822df 100644 --- a/charts/monitoringcoreoscom-servicemonitor-editor/README.md +++ b/charts/monitoringcoreoscom-servicemonitor-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringcoreoscom-servicemonitor-editor --version=v0.38.0 -$ helm upgrade -i monitoringcoreoscom-servicemonitor-editor appscode/monitoringcoreoscom-servicemonitor-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/monitoringcoreoscom-servicemonitor-editor --version=v0.39.0 +$ helm upgrade -i monitoringcoreoscom-servicemonitor-editor appscode/monitoringcoreoscom-servicemonitor-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ServiceMonitor Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `monitoringcoreoscom-servicemonitor-editor`: ```bash -$ helm upgrade -i monitoringcoreoscom-servicemonitor-editor appscode/monitoringcoreoscom-servicemonitor-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i monitoringcoreoscom-servicemonitor-editor appscode/monitoringcoreoscom-servicemonitor-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ServiceMonitor Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringcoreosco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-servicemonitor-editor appscode/monitoringcoreoscom-servicemonitor-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=monitoring.coreos.com/v1 +$ helm upgrade -i monitoringcoreoscom-servicemonitor-editor appscode/monitoringcoreoscom-servicemonitor-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=monitoring.coreos.com/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-servicemonitor-editor appscode/monitoringcoreoscom-servicemonitor-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i monitoringcoreoscom-servicemonitor-editor appscode/monitoringcoreoscom-servicemonitor-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/monitoringcoreoscom-thanosruler-editor/Chart.yaml b/charts/monitoringcoreoscom-thanosruler-editor/Chart.yaml index 87a490eb1e..b5966f46fc 100644 --- a/charts/monitoringcoreoscom-thanosruler-editor/Chart.yaml +++ b/charts/monitoringcoreoscom-thanosruler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.coreos.com","version":"v1","resource":"thanosrulers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ThanosRuler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringcoreoscom-thanosruler-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/monitoringcoreoscom-thanosruler-editor/README.md b/charts/monitoringcoreoscom-thanosruler-editor/README.md index 30a10acdc4..0dae011b74 100644 --- a/charts/monitoringcoreoscom-thanosruler-editor/README.md +++ b/charts/monitoringcoreoscom-thanosruler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringcoreoscom-thanosruler-editor --version=v0.38.0 -$ helm upgrade -i monitoringcoreoscom-thanosruler-editor appscode/monitoringcoreoscom-thanosruler-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/monitoringcoreoscom-thanosruler-editor --version=v0.39.0 +$ helm upgrade -i monitoringcoreoscom-thanosruler-editor appscode/monitoringcoreoscom-thanosruler-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ThanosRuler Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `monitoringcoreoscom-thanosruler-editor`: ```bash -$ helm upgrade -i monitoringcoreoscom-thanosruler-editor appscode/monitoringcoreoscom-thanosruler-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i monitoringcoreoscom-thanosruler-editor appscode/monitoringcoreoscom-thanosruler-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ThanosRuler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringcoreosco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-thanosruler-editor appscode/monitoringcoreoscom-thanosruler-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=monitoring.coreos.com/v1 +$ helm upgrade -i monitoringcoreoscom-thanosruler-editor appscode/monitoringcoreoscom-thanosruler-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=monitoring.coreos.com/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-thanosruler-editor appscode/monitoringcoreoscom-thanosruler-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i monitoringcoreoscom-thanosruler-editor appscode/monitoringcoreoscom-thanosruler-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/monitoringk8sappscodecom-telemetrystack-editor-options/Chart.yaml b/charts/monitoringk8sappscodecom-telemetrystack-editor-options/Chart.yaml index 0c83903caa..f73c2a3ac8 100644 --- a/charts/monitoringk8sappscodecom-telemetrystack-editor-options/Chart.yaml +++ b/charts/monitoringk8sappscodecom-telemetrystack-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: monitoringk8sappscodecom-telemetrystack-editor-options description: TelemetryStack Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/monitoringk8sappscodecom-telemetrystack-editor-options/README.md b/charts/monitoringk8sappscodecom-telemetrystack-editor-options/README.md index cf269a3acb..6ea775476c 100644 --- a/charts/monitoringk8sappscodecom-telemetrystack-editor-options/README.md +++ b/charts/monitoringk8sappscodecom-telemetrystack-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringk8sappscodecom-telemetrystack-editor-options --version=v0.38.0 -$ helm upgrade -i monitoringk8sappscodecom-telemetrystack-editor-options appscode/monitoringk8sappscodecom-telemetrystack-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/monitoringk8sappscodecom-telemetrystack-editor-options --version=v0.39.0 +$ helm upgrade -i monitoringk8sappscodecom-telemetrystack-editor-options appscode/monitoringk8sappscodecom-telemetrystack-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a TelemetryStack Editor UI Options on a [Kubernetes](http://k To install/upgrade the chart with the release name `monitoringk8sappscodecom-telemetrystack-editor-options`: ```bash -$ helm upgrade -i monitoringk8sappscodecom-telemetrystack-editor-options appscode/monitoringk8sappscodecom-telemetrystack-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i monitoringk8sappscodecom-telemetrystack-editor-options appscode/monitoringk8sappscodecom-telemetrystack-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a TelemetryStack Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -165,12 +165,12 @@ The following table lists the configurable parameters of the `monitoringk8sappsc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringk8sappscodecom-telemetrystack-editor-options appscode/monitoringk8sappscodecom-telemetrystack-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=monitoring.k8s.appscode.com +$ helm upgrade -i monitoringk8sappscodecom-telemetrystack-editor-options appscode/monitoringk8sappscodecom-telemetrystack-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=monitoring.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringk8sappscodecom-telemetrystack-editor-options appscode/monitoringk8sappscodecom-telemetrystack-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i monitoringk8sappscodecom-telemetrystack-editor-options appscode/monitoringk8sappscodecom-telemetrystack-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/monitoringk8sappscodecom-telemetrystack-editor/Chart.yaml b/charts/monitoringk8sappscodecom-telemetrystack-editor/Chart.yaml index abb92c5b35..9915530b93 100644 --- a/charts/monitoringk8sappscodecom-telemetrystack-editor/Chart.yaml +++ b/charts/monitoringk8sappscodecom-telemetrystack-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.k8s.appscode.com","version":"v1alpha1","resource":"telemetrystacks"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: TelemetryStack Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringk8sappscodecom-telemetrystack-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/monitoringk8sappscodecom-telemetrystack-editor/README.md b/charts/monitoringk8sappscodecom-telemetrystack-editor/README.md index 86a9b349ef..38f6cad5b0 100644 --- a/charts/monitoringk8sappscodecom-telemetrystack-editor/README.md +++ b/charts/monitoringk8sappscodecom-telemetrystack-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringk8sappscodecom-telemetrystack-editor --version=v0.38.0 -$ helm upgrade -i monitoringk8sappscodecom-telemetrystack-editor appscode/monitoringk8sappscodecom-telemetrystack-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/monitoringk8sappscodecom-telemetrystack-editor --version=v0.39.0 +$ helm upgrade -i monitoringk8sappscodecom-telemetrystack-editor appscode/monitoringk8sappscodecom-telemetrystack-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a TelemetryStack Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `monitoringk8sappscodecom-telemetrystack-editor`: ```bash -$ helm upgrade -i monitoringk8sappscodecom-telemetrystack-editor appscode/monitoringk8sappscodecom-telemetrystack-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i monitoringk8sappscodecom-telemetrystack-editor appscode/monitoringk8sappscodecom-telemetrystack-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a TelemetryStack Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringk8sappsc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringk8sappscodecom-telemetrystack-editor appscode/monitoringk8sappscodecom-telemetrystack-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=monitoring.k8s.appscode.com/v1alpha1 +$ helm upgrade -i monitoringk8sappscodecom-telemetrystack-editor appscode/monitoringk8sappscodecom-telemetrystack-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=monitoring.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringk8sappscodecom-telemetrystack-editor appscode/monitoringk8sappscodecom-telemetrystack-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i monitoringk8sappscodecom-telemetrystack-editor appscode/monitoringk8sappscodecom-telemetrystack-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/monitoringk8sappscodecom-tenant-editor/Chart.yaml b/charts/monitoringk8sappscodecom-tenant-editor/Chart.yaml index 898099029a..b14f53e7bf 100644 --- a/charts/monitoringk8sappscodecom-tenant-editor/Chart.yaml +++ b/charts/monitoringk8sappscodecom-tenant-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.k8s.appscode.com","version":"v1alpha1","resource":"tenants"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Tenant Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringk8sappscodecom-tenant-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/monitoringk8sappscodecom-tenant-editor/README.md b/charts/monitoringk8sappscodecom-tenant-editor/README.md index 46984b296a..7d412afb5d 100644 --- a/charts/monitoringk8sappscodecom-tenant-editor/README.md +++ b/charts/monitoringk8sappscodecom-tenant-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringk8sappscodecom-tenant-editor --version=v0.38.0 -$ helm upgrade -i monitoringk8sappscodecom-tenant-editor appscode/monitoringk8sappscodecom-tenant-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/monitoringk8sappscodecom-tenant-editor --version=v0.39.0 +$ helm upgrade -i monitoringk8sappscodecom-tenant-editor appscode/monitoringk8sappscodecom-tenant-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Tenant Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `monitoringk8sappscodecom-tenant-editor`: ```bash -$ helm upgrade -i monitoringk8sappscodecom-tenant-editor appscode/monitoringk8sappscodecom-tenant-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i monitoringk8sappscodecom-tenant-editor appscode/monitoringk8sappscodecom-tenant-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Tenant Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringk8sappsc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringk8sappscodecom-tenant-editor appscode/monitoringk8sappscodecom-tenant-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=monitoring.k8s.appscode.com/v1alpha1 +$ helm upgrade -i monitoringk8sappscodecom-tenant-editor appscode/monitoringk8sappscodecom-tenant-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=monitoring.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringk8sappscodecom-tenant-editor appscode/monitoringk8sappscodecom-tenant-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i monitoringk8sappscodecom-tenant-editor appscode/monitoringk8sappscodecom-tenant-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/mutationsgatekeepersh-assign-editor/Chart.yaml b/charts/mutationsgatekeepersh-assign-editor/Chart.yaml index 5d9a28b00c..8d492572a0 100644 --- a/charts/mutationsgatekeepersh-assign-editor/Chart.yaml +++ b/charts/mutationsgatekeepersh-assign-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"mutations.gatekeeper.sh","version":"v1","resource":"assign"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Assign Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: mutationsgatekeepersh-assign-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/mutationsgatekeepersh-assign-editor/README.md b/charts/mutationsgatekeepersh-assign-editor/README.md index 352a9cb4b4..a4a083fa11 100644 --- a/charts/mutationsgatekeepersh-assign-editor/README.md +++ b/charts/mutationsgatekeepersh-assign-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/mutationsgatekeepersh-assign-editor --version=v0.38.0 -$ helm upgrade -i mutationsgatekeepersh-assign-editor appscode/mutationsgatekeepersh-assign-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/mutationsgatekeepersh-assign-editor --version=v0.39.0 +$ helm upgrade -i mutationsgatekeepersh-assign-editor appscode/mutationsgatekeepersh-assign-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Assign Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `mutationsgatekeepersh-assign-editor`: ```bash -$ helm upgrade -i mutationsgatekeepersh-assign-editor appscode/mutationsgatekeepersh-assign-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i mutationsgatekeepersh-assign-editor appscode/mutationsgatekeepersh-assign-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Assign Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `mutationsgatekeepe Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i mutationsgatekeepersh-assign-editor appscode/mutationsgatekeepersh-assign-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=mutations.gatekeeper.sh/v1 +$ helm upgrade -i mutationsgatekeepersh-assign-editor appscode/mutationsgatekeepersh-assign-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=mutations.gatekeeper.sh/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i mutationsgatekeepersh-assign-editor appscode/mutationsgatekeepersh-assign-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i mutationsgatekeepersh-assign-editor appscode/mutationsgatekeepersh-assign-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/mutationsgatekeepersh-assignimage-editor/Chart.yaml b/charts/mutationsgatekeepersh-assignimage-editor/Chart.yaml index ea615c8a82..4135812eda 100644 --- a/charts/mutationsgatekeepersh-assignimage-editor/Chart.yaml +++ b/charts/mutationsgatekeepersh-assignimage-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"mutations.gatekeeper.sh","version":"v1alpha1","resource":"assignimage"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AssignImage Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: mutationsgatekeepersh-assignimage-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/mutationsgatekeepersh-assignimage-editor/README.md b/charts/mutationsgatekeepersh-assignimage-editor/README.md index 7ac621b70a..cf943d3213 100644 --- a/charts/mutationsgatekeepersh-assignimage-editor/README.md +++ b/charts/mutationsgatekeepersh-assignimage-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/mutationsgatekeepersh-assignimage-editor --version=v0.38.0 -$ helm upgrade -i mutationsgatekeepersh-assignimage-editor appscode/mutationsgatekeepersh-assignimage-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/mutationsgatekeepersh-assignimage-editor --version=v0.39.0 +$ helm upgrade -i mutationsgatekeepersh-assignimage-editor appscode/mutationsgatekeepersh-assignimage-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AssignImage Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `mutationsgatekeepersh-assignimage-editor`: ```bash -$ helm upgrade -i mutationsgatekeepersh-assignimage-editor appscode/mutationsgatekeepersh-assignimage-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i mutationsgatekeepersh-assignimage-editor appscode/mutationsgatekeepersh-assignimage-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AssignImage Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `mutationsgatekeepe Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i mutationsgatekeepersh-assignimage-editor appscode/mutationsgatekeepersh-assignimage-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=mutations.gatekeeper.sh/v1alpha1 +$ helm upgrade -i mutationsgatekeepersh-assignimage-editor appscode/mutationsgatekeepersh-assignimage-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=mutations.gatekeeper.sh/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i mutationsgatekeepersh-assignimage-editor appscode/mutationsgatekeepersh-assignimage-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i mutationsgatekeepersh-assignimage-editor appscode/mutationsgatekeepersh-assignimage-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/mutationsgatekeepersh-assignmetadata-editor/Chart.yaml b/charts/mutationsgatekeepersh-assignmetadata-editor/Chart.yaml index 9873a00df8..0c26dd369d 100644 --- a/charts/mutationsgatekeepersh-assignmetadata-editor/Chart.yaml +++ b/charts/mutationsgatekeepersh-assignmetadata-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"mutations.gatekeeper.sh","version":"v1","resource":"assignmetadata"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AssignMetadata Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: mutationsgatekeepersh-assignmetadata-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/mutationsgatekeepersh-assignmetadata-editor/README.md b/charts/mutationsgatekeepersh-assignmetadata-editor/README.md index 0fcca330b1..03431c79a2 100644 --- a/charts/mutationsgatekeepersh-assignmetadata-editor/README.md +++ b/charts/mutationsgatekeepersh-assignmetadata-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/mutationsgatekeepersh-assignmetadata-editor --version=v0.38.0 -$ helm upgrade -i mutationsgatekeepersh-assignmetadata-editor appscode/mutationsgatekeepersh-assignmetadata-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/mutationsgatekeepersh-assignmetadata-editor --version=v0.39.0 +$ helm upgrade -i mutationsgatekeepersh-assignmetadata-editor appscode/mutationsgatekeepersh-assignmetadata-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AssignMetadata Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `mutationsgatekeepersh-assignmetadata-editor`: ```bash -$ helm upgrade -i mutationsgatekeepersh-assignmetadata-editor appscode/mutationsgatekeepersh-assignmetadata-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i mutationsgatekeepersh-assignmetadata-editor appscode/mutationsgatekeepersh-assignmetadata-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AssignMetadata Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `mutationsgatekeepe Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i mutationsgatekeepersh-assignmetadata-editor appscode/mutationsgatekeepersh-assignmetadata-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=mutations.gatekeeper.sh/v1 +$ helm upgrade -i mutationsgatekeepersh-assignmetadata-editor appscode/mutationsgatekeepersh-assignmetadata-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=mutations.gatekeeper.sh/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i mutationsgatekeepersh-assignmetadata-editor appscode/mutationsgatekeepersh-assignmetadata-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i mutationsgatekeepersh-assignmetadata-editor appscode/mutationsgatekeepersh-assignmetadata-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/mutationsgatekeepersh-modifyset-editor/Chart.yaml b/charts/mutationsgatekeepersh-modifyset-editor/Chart.yaml index 3f1ad0256f..962a54fbaa 100644 --- a/charts/mutationsgatekeepersh-modifyset-editor/Chart.yaml +++ b/charts/mutationsgatekeepersh-modifyset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"mutations.gatekeeper.sh","version":"v1","resource":"modifyset"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ModifySet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: mutationsgatekeepersh-modifyset-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/mutationsgatekeepersh-modifyset-editor/README.md b/charts/mutationsgatekeepersh-modifyset-editor/README.md index 8ab967d82b..0785991cd1 100644 --- a/charts/mutationsgatekeepersh-modifyset-editor/README.md +++ b/charts/mutationsgatekeepersh-modifyset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/mutationsgatekeepersh-modifyset-editor --version=v0.38.0 -$ helm upgrade -i mutationsgatekeepersh-modifyset-editor appscode/mutationsgatekeepersh-modifyset-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/mutationsgatekeepersh-modifyset-editor --version=v0.39.0 +$ helm upgrade -i mutationsgatekeepersh-modifyset-editor appscode/mutationsgatekeepersh-modifyset-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ModifySet Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `mutationsgatekeepersh-modifyset-editor`: ```bash -$ helm upgrade -i mutationsgatekeepersh-modifyset-editor appscode/mutationsgatekeepersh-modifyset-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i mutationsgatekeepersh-modifyset-editor appscode/mutationsgatekeepersh-modifyset-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ModifySet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `mutationsgatekeepe Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i mutationsgatekeepersh-modifyset-editor appscode/mutationsgatekeepersh-modifyset-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=mutations.gatekeeper.sh/v1 +$ helm upgrade -i mutationsgatekeepersh-modifyset-editor appscode/mutationsgatekeepersh-modifyset-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=mutations.gatekeeper.sh/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i mutationsgatekeepersh-modifyset-editor appscode/mutationsgatekeepersh-modifyset-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i mutationsgatekeepersh-modifyset-editor appscode/mutationsgatekeepersh-modifyset-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/networkazurekubedbcom-privatednszone-editor/Chart.yaml b/charts/networkazurekubedbcom-privatednszone-editor/Chart.yaml index b9e64b6a08..5d61bc97da 100644 --- a/charts/networkazurekubedbcom-privatednszone-editor/Chart.yaml +++ b/charts/networkazurekubedbcom-privatednszone-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"network.azure.kubedb.com","version":"v1alpha1","resource":"privatednszones"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PrivateDNSZone Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkazurekubedbcom-privatednszone-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/networkazurekubedbcom-privatednszone-editor/README.md b/charts/networkazurekubedbcom-privatednszone-editor/README.md index 929ca88cc9..8441769822 100644 --- a/charts/networkazurekubedbcom-privatednszone-editor/README.md +++ b/charts/networkazurekubedbcom-privatednszone-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkazurekubedbcom-privatednszone-editor --version=v0.38.0 -$ helm upgrade -i networkazurekubedbcom-privatednszone-editor appscode/networkazurekubedbcom-privatednszone-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/networkazurekubedbcom-privatednszone-editor --version=v0.39.0 +$ helm upgrade -i networkazurekubedbcom-privatednszone-editor appscode/networkazurekubedbcom-privatednszone-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PrivateDNSZone Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `networkazurekubedbcom-privatednszone-editor`: ```bash -$ helm upgrade -i networkazurekubedbcom-privatednszone-editor appscode/networkazurekubedbcom-privatednszone-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i networkazurekubedbcom-privatednszone-editor appscode/networkazurekubedbcom-privatednszone-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PrivateDNSZone Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-privatednszone-editor appscode/networkazurekubedbcom-privatednszone-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 +$ helm upgrade -i networkazurekubedbcom-privatednszone-editor appscode/networkazurekubedbcom-privatednszone-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-privatednszone-editor appscode/networkazurekubedbcom-privatednszone-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i networkazurekubedbcom-privatednszone-editor appscode/networkazurekubedbcom-privatednszone-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/networkazurekubedbcom-privatednszonevirtualnetworklink-editor/Chart.yaml b/charts/networkazurekubedbcom-privatednszonevirtualnetworklink-editor/Chart.yaml index 2fd72d0519..93f6bcb6c7 100644 --- a/charts/networkazurekubedbcom-privatednszonevirtualnetworklink-editor/Chart.yaml +++ b/charts/networkazurekubedbcom-privatednszonevirtualnetworklink-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"network.azure.kubedb.com","version":"v1alpha1","resource":"privatednszonevirtualnetworklinks"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PrivateDNSZoneVirtualNetworkLink Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkazurekubedbcom-privatednszonevirtualnetworklink-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/networkazurekubedbcom-privatednszonevirtualnetworklink-editor/README.md b/charts/networkazurekubedbcom-privatednszonevirtualnetworklink-editor/README.md index 2d41640381..22afba8f73 100644 --- a/charts/networkazurekubedbcom-privatednszonevirtualnetworklink-editor/README.md +++ b/charts/networkazurekubedbcom-privatednszonevirtualnetworklink-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkazurekubedbcom-privatednszonevirtualnetworklink-editor --version=v0.38.0 -$ helm upgrade -i networkazurekubedbcom-privatednszonevirtualnetworklink-editor appscode/networkazurekubedbcom-privatednszonevirtualnetworklink-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/networkazurekubedbcom-privatednszonevirtualnetworklink-editor --version=v0.39.0 +$ helm upgrade -i networkazurekubedbcom-privatednszonevirtualnetworklink-editor appscode/networkazurekubedbcom-privatednszonevirtualnetworklink-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PrivateDNSZoneVirtualNetworkLink Editor on a [Kubernetes](h To install/upgrade the chart with the release name `networkazurekubedbcom-privatednszonevirtualnetworklink-editor`: ```bash -$ helm upgrade -i networkazurekubedbcom-privatednszonevirtualnetworklink-editor appscode/networkazurekubedbcom-privatednszonevirtualnetworklink-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i networkazurekubedbcom-privatednszonevirtualnetworklink-editor appscode/networkazurekubedbcom-privatednszonevirtualnetworklink-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PrivateDNSZoneVirtualNetworkLink Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-privatednszonevirtualnetworklink-editor appscode/networkazurekubedbcom-privatednszonevirtualnetworklink-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 +$ helm upgrade -i networkazurekubedbcom-privatednszonevirtualnetworklink-editor appscode/networkazurekubedbcom-privatednszonevirtualnetworklink-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-privatednszonevirtualnetworklink-editor appscode/networkazurekubedbcom-privatednszonevirtualnetworklink-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i networkazurekubedbcom-privatednszonevirtualnetworklink-editor appscode/networkazurekubedbcom-privatednszonevirtualnetworklink-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/networkazurekubedbcom-routetable-editor/Chart.yaml b/charts/networkazurekubedbcom-routetable-editor/Chart.yaml index ef1d376864..19868dbdac 100644 --- a/charts/networkazurekubedbcom-routetable-editor/Chart.yaml +++ b/charts/networkazurekubedbcom-routetable-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"network.azure.kubedb.com","version":"v1alpha1","resource":"routetables"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RouteTable Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkazurekubedbcom-routetable-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/networkazurekubedbcom-routetable-editor/README.md b/charts/networkazurekubedbcom-routetable-editor/README.md index 82fb9ceeea..62f9ae8412 100644 --- a/charts/networkazurekubedbcom-routetable-editor/README.md +++ b/charts/networkazurekubedbcom-routetable-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkazurekubedbcom-routetable-editor --version=v0.38.0 -$ helm upgrade -i networkazurekubedbcom-routetable-editor appscode/networkazurekubedbcom-routetable-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/networkazurekubedbcom-routetable-editor --version=v0.39.0 +$ helm upgrade -i networkazurekubedbcom-routetable-editor appscode/networkazurekubedbcom-routetable-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RouteTable Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `networkazurekubedbcom-routetable-editor`: ```bash -$ helm upgrade -i networkazurekubedbcom-routetable-editor appscode/networkazurekubedbcom-routetable-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i networkazurekubedbcom-routetable-editor appscode/networkazurekubedbcom-routetable-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RouteTable Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-routetable-editor appscode/networkazurekubedbcom-routetable-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 +$ helm upgrade -i networkazurekubedbcom-routetable-editor appscode/networkazurekubedbcom-routetable-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-routetable-editor appscode/networkazurekubedbcom-routetable-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i networkazurekubedbcom-routetable-editor appscode/networkazurekubedbcom-routetable-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/networkazurekubedbcom-securitygroup-editor/Chart.yaml b/charts/networkazurekubedbcom-securitygroup-editor/Chart.yaml index 0eccd4aa34..853f6dcbaa 100644 --- a/charts/networkazurekubedbcom-securitygroup-editor/Chart.yaml +++ b/charts/networkazurekubedbcom-securitygroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"network.azure.kubedb.com","version":"v1alpha1","resource":"securitygroups"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SecurityGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkazurekubedbcom-securitygroup-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/networkazurekubedbcom-securitygroup-editor/README.md b/charts/networkazurekubedbcom-securitygroup-editor/README.md index 844f7a7d90..ec3cc0018e 100644 --- a/charts/networkazurekubedbcom-securitygroup-editor/README.md +++ b/charts/networkazurekubedbcom-securitygroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkazurekubedbcom-securitygroup-editor --version=v0.38.0 -$ helm upgrade -i networkazurekubedbcom-securitygroup-editor appscode/networkazurekubedbcom-securitygroup-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/networkazurekubedbcom-securitygroup-editor --version=v0.39.0 +$ helm upgrade -i networkazurekubedbcom-securitygroup-editor appscode/networkazurekubedbcom-securitygroup-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecurityGroup Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `networkazurekubedbcom-securitygroup-editor`: ```bash -$ helm upgrade -i networkazurekubedbcom-securitygroup-editor appscode/networkazurekubedbcom-securitygroup-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i networkazurekubedbcom-securitygroup-editor appscode/networkazurekubedbcom-securitygroup-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SecurityGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-securitygroup-editor appscode/networkazurekubedbcom-securitygroup-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 +$ helm upgrade -i networkazurekubedbcom-securitygroup-editor appscode/networkazurekubedbcom-securitygroup-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-securitygroup-editor appscode/networkazurekubedbcom-securitygroup-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i networkazurekubedbcom-securitygroup-editor appscode/networkazurekubedbcom-securitygroup-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/networkazurekubedbcom-subnet-editor/Chart.yaml b/charts/networkazurekubedbcom-subnet-editor/Chart.yaml index 94c6f6ec45..1117035c18 100644 --- a/charts/networkazurekubedbcom-subnet-editor/Chart.yaml +++ b/charts/networkazurekubedbcom-subnet-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"network.azure.kubedb.com","version":"v1alpha1","resource":"subnets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Subnet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkazurekubedbcom-subnet-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/networkazurekubedbcom-subnet-editor/README.md b/charts/networkazurekubedbcom-subnet-editor/README.md index 6121d6baa5..625877085a 100644 --- a/charts/networkazurekubedbcom-subnet-editor/README.md +++ b/charts/networkazurekubedbcom-subnet-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkazurekubedbcom-subnet-editor --version=v0.38.0 -$ helm upgrade -i networkazurekubedbcom-subnet-editor appscode/networkazurekubedbcom-subnet-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/networkazurekubedbcom-subnet-editor --version=v0.39.0 +$ helm upgrade -i networkazurekubedbcom-subnet-editor appscode/networkazurekubedbcom-subnet-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Subnet Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `networkazurekubedbcom-subnet-editor`: ```bash -$ helm upgrade -i networkazurekubedbcom-subnet-editor appscode/networkazurekubedbcom-subnet-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i networkazurekubedbcom-subnet-editor appscode/networkazurekubedbcom-subnet-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Subnet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-subnet-editor appscode/networkazurekubedbcom-subnet-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 +$ helm upgrade -i networkazurekubedbcom-subnet-editor appscode/networkazurekubedbcom-subnet-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-subnet-editor appscode/networkazurekubedbcom-subnet-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i networkazurekubedbcom-subnet-editor appscode/networkazurekubedbcom-subnet-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor/Chart.yaml b/charts/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor/Chart.yaml index 91fad15b3f..6e55c5fd2e 100644 --- a/charts/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor/Chart.yaml +++ b/charts/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"network.azure.kubedb.com","version":"v1alpha1","resource":"subnetnetworksecuritygroupassociations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SubnetNetworkSecurityGroupAssociation Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor/README.md b/charts/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor/README.md index bbcc1a72f0..ace82426d1 100644 --- a/charts/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor/README.md +++ b/charts/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor --version=v0.38.0 -$ helm upgrade -i networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor appscode/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor --version=v0.39.0 +$ helm upgrade -i networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor appscode/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SubnetNetworkSecurityGroupAssociation Editor on a [Kubernet To install/upgrade the chart with the release name `networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor`: ```bash -$ helm upgrade -i networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor appscode/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor appscode/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SubnetNetworkSecurityGroupAssociation Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor appscode/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 +$ helm upgrade -i networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor appscode/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor appscode/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor appscode/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/networkazurekubedbcom-subnetroutetableassociation-editor/Chart.yaml b/charts/networkazurekubedbcom-subnetroutetableassociation-editor/Chart.yaml index 4092963afb..97bd02734e 100644 --- a/charts/networkazurekubedbcom-subnetroutetableassociation-editor/Chart.yaml +++ b/charts/networkazurekubedbcom-subnetroutetableassociation-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"network.azure.kubedb.com","version":"v1alpha1","resource":"subnetroutetableassociations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SubnetRouteTableAssociation Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkazurekubedbcom-subnetroutetableassociation-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/networkazurekubedbcom-subnetroutetableassociation-editor/README.md b/charts/networkazurekubedbcom-subnetroutetableassociation-editor/README.md index 23b61601b9..63da62cef2 100644 --- a/charts/networkazurekubedbcom-subnetroutetableassociation-editor/README.md +++ b/charts/networkazurekubedbcom-subnetroutetableassociation-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkazurekubedbcom-subnetroutetableassociation-editor --version=v0.38.0 -$ helm upgrade -i networkazurekubedbcom-subnetroutetableassociation-editor appscode/networkazurekubedbcom-subnetroutetableassociation-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/networkazurekubedbcom-subnetroutetableassociation-editor --version=v0.39.0 +$ helm upgrade -i networkazurekubedbcom-subnetroutetableassociation-editor appscode/networkazurekubedbcom-subnetroutetableassociation-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SubnetRouteTableAssociation Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `networkazurekubedbcom-subnetroutetableassociation-editor`: ```bash -$ helm upgrade -i networkazurekubedbcom-subnetroutetableassociation-editor appscode/networkazurekubedbcom-subnetroutetableassociation-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i networkazurekubedbcom-subnetroutetableassociation-editor appscode/networkazurekubedbcom-subnetroutetableassociation-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SubnetRouteTableAssociation Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-subnetroutetableassociation-editor appscode/networkazurekubedbcom-subnetroutetableassociation-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 +$ helm upgrade -i networkazurekubedbcom-subnetroutetableassociation-editor appscode/networkazurekubedbcom-subnetroutetableassociation-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-subnetroutetableassociation-editor appscode/networkazurekubedbcom-subnetroutetableassociation-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i networkazurekubedbcom-subnetroutetableassociation-editor appscode/networkazurekubedbcom-subnetroutetableassociation-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/networkazurekubedbcom-virtualnetwork-editor/Chart.yaml b/charts/networkazurekubedbcom-virtualnetwork-editor/Chart.yaml index 3b3375f809..c7e4d7f488 100644 --- a/charts/networkazurekubedbcom-virtualnetwork-editor/Chart.yaml +++ b/charts/networkazurekubedbcom-virtualnetwork-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"network.azure.kubedb.com","version":"v1alpha1","resource":"virtualnetworks"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: VirtualNetwork Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkazurekubedbcom-virtualnetwork-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/networkazurekubedbcom-virtualnetwork-editor/README.md b/charts/networkazurekubedbcom-virtualnetwork-editor/README.md index b0adfb566b..eb796372b7 100644 --- a/charts/networkazurekubedbcom-virtualnetwork-editor/README.md +++ b/charts/networkazurekubedbcom-virtualnetwork-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkazurekubedbcom-virtualnetwork-editor --version=v0.38.0 -$ helm upgrade -i networkazurekubedbcom-virtualnetwork-editor appscode/networkazurekubedbcom-virtualnetwork-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/networkazurekubedbcom-virtualnetwork-editor --version=v0.39.0 +$ helm upgrade -i networkazurekubedbcom-virtualnetwork-editor appscode/networkazurekubedbcom-virtualnetwork-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VirtualNetwork Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `networkazurekubedbcom-virtualnetwork-editor`: ```bash -$ helm upgrade -i networkazurekubedbcom-virtualnetwork-editor appscode/networkazurekubedbcom-virtualnetwork-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i networkazurekubedbcom-virtualnetwork-editor appscode/networkazurekubedbcom-virtualnetwork-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a VirtualNetwork Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-virtualnetwork-editor appscode/networkazurekubedbcom-virtualnetwork-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 +$ helm upgrade -i networkazurekubedbcom-virtualnetwork-editor appscode/networkazurekubedbcom-virtualnetwork-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-virtualnetwork-editor appscode/networkazurekubedbcom-virtualnetwork-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i networkazurekubedbcom-virtualnetwork-editor appscode/networkazurekubedbcom-virtualnetwork-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/networkazurekubedbcom-virtualnetworkpeering-editor/Chart.yaml b/charts/networkazurekubedbcom-virtualnetworkpeering-editor/Chart.yaml index 1264fc97cf..29ce8ff4b5 100644 --- a/charts/networkazurekubedbcom-virtualnetworkpeering-editor/Chart.yaml +++ b/charts/networkazurekubedbcom-virtualnetworkpeering-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"network.azure.kubedb.com","version":"v1alpha1","resource":"virtualnetworkpeerings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: VirtualNetworkPeering Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkazurekubedbcom-virtualnetworkpeering-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/networkazurekubedbcom-virtualnetworkpeering-editor/README.md b/charts/networkazurekubedbcom-virtualnetworkpeering-editor/README.md index 8482f47a3c..cd3528b3f2 100644 --- a/charts/networkazurekubedbcom-virtualnetworkpeering-editor/README.md +++ b/charts/networkazurekubedbcom-virtualnetworkpeering-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkazurekubedbcom-virtualnetworkpeering-editor --version=v0.38.0 -$ helm upgrade -i networkazurekubedbcom-virtualnetworkpeering-editor appscode/networkazurekubedbcom-virtualnetworkpeering-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/networkazurekubedbcom-virtualnetworkpeering-editor --version=v0.39.0 +$ helm upgrade -i networkazurekubedbcom-virtualnetworkpeering-editor appscode/networkazurekubedbcom-virtualnetworkpeering-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VirtualNetworkPeering Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `networkazurekubedbcom-virtualnetworkpeering-editor`: ```bash -$ helm upgrade -i networkazurekubedbcom-virtualnetworkpeering-editor appscode/networkazurekubedbcom-virtualnetworkpeering-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i networkazurekubedbcom-virtualnetworkpeering-editor appscode/networkazurekubedbcom-virtualnetworkpeering-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a VirtualNetworkPeering Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-virtualnetworkpeering-editor appscode/networkazurekubedbcom-virtualnetworkpeering-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 +$ helm upgrade -i networkazurekubedbcom-virtualnetworkpeering-editor appscode/networkazurekubedbcom-virtualnetworkpeering-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-virtualnetworkpeering-editor appscode/networkazurekubedbcom-virtualnetworkpeering-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i networkazurekubedbcom-virtualnetworkpeering-editor appscode/networkazurekubedbcom-virtualnetworkpeering-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/networkingk8sio-ingress-editor/Chart.yaml b/charts/networkingk8sio-ingress-editor/Chart.yaml index dd780cc48b..8e351f8a9a 100644 --- a/charts/networkingk8sio-ingress-editor/Chart.yaml +++ b/charts/networkingk8sio-ingress-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"networking.k8s.io","version":"v1","resource":"ingresses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Ingress Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkingk8sio-ingress-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/networkingk8sio-ingress-editor/README.md b/charts/networkingk8sio-ingress-editor/README.md index 8462ff6c16..bafa13d66c 100644 --- a/charts/networkingk8sio-ingress-editor/README.md +++ b/charts/networkingk8sio-ingress-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkingk8sio-ingress-editor --version=v0.38.0 -$ helm upgrade -i networkingk8sio-ingress-editor appscode/networkingk8sio-ingress-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/networkingk8sio-ingress-editor --version=v0.39.0 +$ helm upgrade -i networkingk8sio-ingress-editor appscode/networkingk8sio-ingress-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Ingress Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `networkingk8sio-ingress-editor`: ```bash -$ helm upgrade -i networkingk8sio-ingress-editor appscode/networkingk8sio-ingress-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i networkingk8sio-ingress-editor appscode/networkingk8sio-ingress-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Ingress Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkingk8sio-in Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkingk8sio-ingress-editor appscode/networkingk8sio-ingress-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=networking.k8s.io/v1 +$ helm upgrade -i networkingk8sio-ingress-editor appscode/networkingk8sio-ingress-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=networking.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkingk8sio-ingress-editor appscode/networkingk8sio-ingress-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i networkingk8sio-ingress-editor appscode/networkingk8sio-ingress-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/networkingk8sio-ingressclass-editor/Chart.yaml b/charts/networkingk8sio-ingressclass-editor/Chart.yaml index 1b30036de8..eff19cf84e 100644 --- a/charts/networkingk8sio-ingressclass-editor/Chart.yaml +++ b/charts/networkingk8sio-ingressclass-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"networking.k8s.io","version":"v1","resource":"ingressclasses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: IngressClass Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkingk8sio-ingressclass-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/networkingk8sio-ingressclass-editor/README.md b/charts/networkingk8sio-ingressclass-editor/README.md index c267d86a01..0b7040979b 100644 --- a/charts/networkingk8sio-ingressclass-editor/README.md +++ b/charts/networkingk8sio-ingressclass-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkingk8sio-ingressclass-editor --version=v0.38.0 -$ helm upgrade -i networkingk8sio-ingressclass-editor appscode/networkingk8sio-ingressclass-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/networkingk8sio-ingressclass-editor --version=v0.39.0 +$ helm upgrade -i networkingk8sio-ingressclass-editor appscode/networkingk8sio-ingressclass-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a IngressClass Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `networkingk8sio-ingressclass-editor`: ```bash -$ helm upgrade -i networkingk8sio-ingressclass-editor appscode/networkingk8sio-ingressclass-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i networkingk8sio-ingressclass-editor appscode/networkingk8sio-ingressclass-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a IngressClass Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkingk8sio-in Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkingk8sio-ingressclass-editor appscode/networkingk8sio-ingressclass-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=networking.k8s.io/v1 +$ helm upgrade -i networkingk8sio-ingressclass-editor appscode/networkingk8sio-ingressclass-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=networking.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkingk8sio-ingressclass-editor appscode/networkingk8sio-ingressclass-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i networkingk8sio-ingressclass-editor appscode/networkingk8sio-ingressclass-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/networkingk8sio-networkpolicy-editor/Chart.yaml b/charts/networkingk8sio-networkpolicy-editor/Chart.yaml index 88f82bc2b4..92669ae8a8 100644 --- a/charts/networkingk8sio-networkpolicy-editor/Chart.yaml +++ b/charts/networkingk8sio-networkpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"networking.k8s.io","version":"v1","resource":"networkpolicies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: NetworkPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkingk8sio-networkpolicy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/networkingk8sio-networkpolicy-editor/README.md b/charts/networkingk8sio-networkpolicy-editor/README.md index 668dcc496b..6d33040baa 100644 --- a/charts/networkingk8sio-networkpolicy-editor/README.md +++ b/charts/networkingk8sio-networkpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkingk8sio-networkpolicy-editor --version=v0.38.0 -$ helm upgrade -i networkingk8sio-networkpolicy-editor appscode/networkingk8sio-networkpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/networkingk8sio-networkpolicy-editor --version=v0.39.0 +$ helm upgrade -i networkingk8sio-networkpolicy-editor appscode/networkingk8sio-networkpolicy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a NetworkPolicy Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `networkingk8sio-networkpolicy-editor`: ```bash -$ helm upgrade -i networkingk8sio-networkpolicy-editor appscode/networkingk8sio-networkpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i networkingk8sio-networkpolicy-editor appscode/networkingk8sio-networkpolicy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a NetworkPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkingk8sio-ne Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkingk8sio-networkpolicy-editor appscode/networkingk8sio-networkpolicy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=networking.k8s.io/v1 +$ helm upgrade -i networkingk8sio-networkpolicy-editor appscode/networkingk8sio-networkpolicy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=networking.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkingk8sio-networkpolicy-editor appscode/networkingk8sio-networkpolicy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i networkingk8sio-networkpolicy-editor appscode/networkingk8sio-networkpolicy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/nodek8sappscodecom-nodetopology-editor/Chart.yaml b/charts/nodek8sappscodecom-nodetopology-editor/Chart.yaml index e966a6370c..7189b5d265 100644 --- a/charts/nodek8sappscodecom-nodetopology-editor/Chart.yaml +++ b/charts/nodek8sappscodecom-nodetopology-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"node.k8s.appscode.com","version":"v1alpha1","resource":"nodetopologies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: NodeTopology Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: nodek8sappscodecom-nodetopology-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/nodek8sappscodecom-nodetopology-editor/README.md b/charts/nodek8sappscodecom-nodetopology-editor/README.md index b0bd7ea198..97fcaaecad 100644 --- a/charts/nodek8sappscodecom-nodetopology-editor/README.md +++ b/charts/nodek8sappscodecom-nodetopology-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/nodek8sappscodecom-nodetopology-editor --version=v0.38.0 -$ helm upgrade -i nodek8sappscodecom-nodetopology-editor appscode/nodek8sappscodecom-nodetopology-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/nodek8sappscodecom-nodetopology-editor --version=v0.39.0 +$ helm upgrade -i nodek8sappscodecom-nodetopology-editor appscode/nodek8sappscodecom-nodetopology-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a NodeTopology Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `nodek8sappscodecom-nodetopology-editor`: ```bash -$ helm upgrade -i nodek8sappscodecom-nodetopology-editor appscode/nodek8sappscodecom-nodetopology-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i nodek8sappscodecom-nodetopology-editor appscode/nodek8sappscodecom-nodetopology-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a NodeTopology Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `nodek8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i nodek8sappscodecom-nodetopology-editor appscode/nodek8sappscodecom-nodetopology-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=node.k8s.appscode.com/v1alpha1 +$ helm upgrade -i nodek8sappscodecom-nodetopology-editor appscode/nodek8sappscodecom-nodetopology-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=node.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i nodek8sappscodecom-nodetopology-editor appscode/nodek8sappscodecom-nodetopology-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i nodek8sappscodecom-nodetopology-editor appscode/nodek8sappscodecom-nodetopology-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/nodek8sio-runtimeclass-editor/Chart.yaml b/charts/nodek8sio-runtimeclass-editor/Chart.yaml index 2b08733692..5e1864b648 100644 --- a/charts/nodek8sio-runtimeclass-editor/Chart.yaml +++ b/charts/nodek8sio-runtimeclass-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"node.k8s.io","version":"v1","resource":"runtimeclasses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RuntimeClass Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: nodek8sio-runtimeclass-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/nodek8sio-runtimeclass-editor/README.md b/charts/nodek8sio-runtimeclass-editor/README.md index 67a0391891..2bf1c2e7a0 100644 --- a/charts/nodek8sio-runtimeclass-editor/README.md +++ b/charts/nodek8sio-runtimeclass-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/nodek8sio-runtimeclass-editor --version=v0.38.0 -$ helm upgrade -i nodek8sio-runtimeclass-editor appscode/nodek8sio-runtimeclass-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/nodek8sio-runtimeclass-editor --version=v0.39.0 +$ helm upgrade -i nodek8sio-runtimeclass-editor appscode/nodek8sio-runtimeclass-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RuntimeClass Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `nodek8sio-runtimeclass-editor`: ```bash -$ helm upgrade -i nodek8sio-runtimeclass-editor appscode/nodek8sio-runtimeclass-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i nodek8sio-runtimeclass-editor appscode/nodek8sio-runtimeclass-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RuntimeClass Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `nodek8sio-runtimec Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i nodek8sio-runtimeclass-editor appscode/nodek8sio-runtimeclass-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=node.k8s.io/v1 +$ helm upgrade -i nodek8sio-runtimeclass-editor appscode/nodek8sio-runtimeclass-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=node.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i nodek8sio-runtimeclass-editor appscode/nodek8sio-runtimeclass-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i nodek8sio-runtimeclass-editor appscode/nodek8sio-runtimeclass-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/notificationtoolkitfluxcdio-alert-editor/Chart.yaml b/charts/notificationtoolkitfluxcdio-alert-editor/Chart.yaml index 1786573433..1a7dc117ba 100644 --- a/charts/notificationtoolkitfluxcdio-alert-editor/Chart.yaml +++ b/charts/notificationtoolkitfluxcdio-alert-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"notification.toolkit.fluxcd.io","version":"v1beta3","resource":"alerts"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Alert Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: notificationtoolkitfluxcdio-alert-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/notificationtoolkitfluxcdio-alert-editor/README.md b/charts/notificationtoolkitfluxcdio-alert-editor/README.md index ee38c60173..b2f6c742e7 100644 --- a/charts/notificationtoolkitfluxcdio-alert-editor/README.md +++ b/charts/notificationtoolkitfluxcdio-alert-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/notificationtoolkitfluxcdio-alert-editor --version=v0.38.0 -$ helm upgrade -i notificationtoolkitfluxcdio-alert-editor appscode/notificationtoolkitfluxcdio-alert-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/notificationtoolkitfluxcdio-alert-editor --version=v0.39.0 +$ helm upgrade -i notificationtoolkitfluxcdio-alert-editor appscode/notificationtoolkitfluxcdio-alert-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Alert Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `notificationtoolkitfluxcdio-alert-editor`: ```bash -$ helm upgrade -i notificationtoolkitfluxcdio-alert-editor appscode/notificationtoolkitfluxcdio-alert-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i notificationtoolkitfluxcdio-alert-editor appscode/notificationtoolkitfluxcdio-alert-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Alert Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `notificationtoolki Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i notificationtoolkitfluxcdio-alert-editor appscode/notificationtoolkitfluxcdio-alert-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=notification.toolkit.fluxcd.io/v1beta3 +$ helm upgrade -i notificationtoolkitfluxcdio-alert-editor appscode/notificationtoolkitfluxcdio-alert-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=notification.toolkit.fluxcd.io/v1beta3 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i notificationtoolkitfluxcdio-alert-editor appscode/notificationtoolkitfluxcdio-alert-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i notificationtoolkitfluxcdio-alert-editor appscode/notificationtoolkitfluxcdio-alert-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/notificationtoolkitfluxcdio-provider-editor/Chart.yaml b/charts/notificationtoolkitfluxcdio-provider-editor/Chart.yaml index 360c530d06..4db0a73302 100644 --- a/charts/notificationtoolkitfluxcdio-provider-editor/Chart.yaml +++ b/charts/notificationtoolkitfluxcdio-provider-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"notification.toolkit.fluxcd.io","version":"v1beta3","resource":"providers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Provider Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: notificationtoolkitfluxcdio-provider-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/notificationtoolkitfluxcdio-provider-editor/README.md b/charts/notificationtoolkitfluxcdio-provider-editor/README.md index ab6e3fa7cf..b91efbcdf0 100644 --- a/charts/notificationtoolkitfluxcdio-provider-editor/README.md +++ b/charts/notificationtoolkitfluxcdio-provider-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/notificationtoolkitfluxcdio-provider-editor --version=v0.38.0 -$ helm upgrade -i notificationtoolkitfluxcdio-provider-editor appscode/notificationtoolkitfluxcdio-provider-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/notificationtoolkitfluxcdio-provider-editor --version=v0.39.0 +$ helm upgrade -i notificationtoolkitfluxcdio-provider-editor appscode/notificationtoolkitfluxcdio-provider-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Provider Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `notificationtoolkitfluxcdio-provider-editor`: ```bash -$ helm upgrade -i notificationtoolkitfluxcdio-provider-editor appscode/notificationtoolkitfluxcdio-provider-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i notificationtoolkitfluxcdio-provider-editor appscode/notificationtoolkitfluxcdio-provider-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Provider Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `notificationtoolki Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i notificationtoolkitfluxcdio-provider-editor appscode/notificationtoolkitfluxcdio-provider-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=notification.toolkit.fluxcd.io/v1beta3 +$ helm upgrade -i notificationtoolkitfluxcdio-provider-editor appscode/notificationtoolkitfluxcdio-provider-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=notification.toolkit.fluxcd.io/v1beta3 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i notificationtoolkitfluxcdio-provider-editor appscode/notificationtoolkitfluxcdio-provider-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i notificationtoolkitfluxcdio-provider-editor appscode/notificationtoolkitfluxcdio-provider-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/notificationtoolkitfluxcdio-receiver-editor/Chart.yaml b/charts/notificationtoolkitfluxcdio-receiver-editor/Chart.yaml index d6e657b932..3cbf73ac15 100644 --- a/charts/notificationtoolkitfluxcdio-receiver-editor/Chart.yaml +++ b/charts/notificationtoolkitfluxcdio-receiver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"notification.toolkit.fluxcd.io","version":"v1","resource":"receivers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Receiver Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: notificationtoolkitfluxcdio-receiver-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/notificationtoolkitfluxcdio-receiver-editor/README.md b/charts/notificationtoolkitfluxcdio-receiver-editor/README.md index 70bd068a08..5225e0bfde 100644 --- a/charts/notificationtoolkitfluxcdio-receiver-editor/README.md +++ b/charts/notificationtoolkitfluxcdio-receiver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/notificationtoolkitfluxcdio-receiver-editor --version=v0.38.0 -$ helm upgrade -i notificationtoolkitfluxcdio-receiver-editor appscode/notificationtoolkitfluxcdio-receiver-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/notificationtoolkitfluxcdio-receiver-editor --version=v0.39.0 +$ helm upgrade -i notificationtoolkitfluxcdio-receiver-editor appscode/notificationtoolkitfluxcdio-receiver-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Receiver Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `notificationtoolkitfluxcdio-receiver-editor`: ```bash -$ helm upgrade -i notificationtoolkitfluxcdio-receiver-editor appscode/notificationtoolkitfluxcdio-receiver-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i notificationtoolkitfluxcdio-receiver-editor appscode/notificationtoolkitfluxcdio-receiver-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Receiver Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `notificationtoolki Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i notificationtoolkitfluxcdio-receiver-editor appscode/notificationtoolkitfluxcdio-receiver-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=notification.toolkit.fluxcd.io/v1 +$ helm upgrade -i notificationtoolkitfluxcdio-receiver-editor appscode/notificationtoolkitfluxcdio-receiver-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=notification.toolkit.fluxcd.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i notificationtoolkitfluxcdio-receiver-editor appscode/notificationtoolkitfluxcdio-receiver-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i notificationtoolkitfluxcdio-receiver-editor appscode/notificationtoolkitfluxcdio-receiver-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/offlinelicensesappscodecom-offlinelicense-editor/Chart.yaml b/charts/offlinelicensesappscodecom-offlinelicense-editor/Chart.yaml index 193310374a..39e993508a 100644 --- a/charts/offlinelicensesappscodecom-offlinelicense-editor/Chart.yaml +++ b/charts/offlinelicensesappscodecom-offlinelicense-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"offline.licenses.appscode.com","version":"v1alpha1","resource":"offlinelicenses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: OfflineLicense Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: offlinelicensesappscodecom-offlinelicense-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/offlinelicensesappscodecom-offlinelicense-editor/README.md b/charts/offlinelicensesappscodecom-offlinelicense-editor/README.md index ac06a2b157..ca05e9d9ae 100644 --- a/charts/offlinelicensesappscodecom-offlinelicense-editor/README.md +++ b/charts/offlinelicensesappscodecom-offlinelicense-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/offlinelicensesappscodecom-offlinelicense-editor --version=v0.38.0 -$ helm upgrade -i offlinelicensesappscodecom-offlinelicense-editor appscode/offlinelicensesappscodecom-offlinelicense-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/offlinelicensesappscodecom-offlinelicense-editor --version=v0.39.0 +$ helm upgrade -i offlinelicensesappscodecom-offlinelicense-editor appscode/offlinelicensesappscodecom-offlinelicense-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a OfflineLicense Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `offlinelicensesappscodecom-offlinelicense-editor`: ```bash -$ helm upgrade -i offlinelicensesappscodecom-offlinelicense-editor appscode/offlinelicensesappscodecom-offlinelicense-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i offlinelicensesappscodecom-offlinelicense-editor appscode/offlinelicensesappscodecom-offlinelicense-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a OfflineLicense Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `offlinelicensesapp Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i offlinelicensesappscodecom-offlinelicense-editor appscode/offlinelicensesappscodecom-offlinelicense-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=offline.licenses.appscode.com/v1alpha1 +$ helm upgrade -i offlinelicensesappscodecom-offlinelicense-editor appscode/offlinelicensesappscodecom-offlinelicense-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=offline.licenses.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i offlinelicensesappscodecom-offlinelicense-editor appscode/offlinelicensesappscodecom-offlinelicense-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i offlinelicensesappscodecom-offlinelicense-editor appscode/offlinelicensesappscodecom-offlinelicense-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/openvizdev-grafanadashboard-editor/Chart.yaml b/charts/openvizdev-grafanadashboard-editor/Chart.yaml index 17e3787694..db255d4361 100644 --- a/charts/openvizdev-grafanadashboard-editor/Chart.yaml +++ b/charts/openvizdev-grafanadashboard-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"openviz.dev","version":"v1alpha1","resource":"grafanadashboards"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GrafanaDashboard Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: openvizdev-grafanadashboard-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/openvizdev-grafanadashboard-editor/README.md b/charts/openvizdev-grafanadashboard-editor/README.md index 996e9636b8..2f43a14440 100644 --- a/charts/openvizdev-grafanadashboard-editor/README.md +++ b/charts/openvizdev-grafanadashboard-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/openvizdev-grafanadashboard-editor --version=v0.38.0 -$ helm upgrade -i openvizdev-grafanadashboard-editor appscode/openvizdev-grafanadashboard-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/openvizdev-grafanadashboard-editor --version=v0.39.0 +$ helm upgrade -i openvizdev-grafanadashboard-editor appscode/openvizdev-grafanadashboard-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GrafanaDashboard Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `openvizdev-grafanadashboard-editor`: ```bash -$ helm upgrade -i openvizdev-grafanadashboard-editor appscode/openvizdev-grafanadashboard-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i openvizdev-grafanadashboard-editor appscode/openvizdev-grafanadashboard-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GrafanaDashboard Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `openvizdev-grafana Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i openvizdev-grafanadashboard-editor appscode/openvizdev-grafanadashboard-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=openviz.dev/v1alpha1 +$ helm upgrade -i openvizdev-grafanadashboard-editor appscode/openvizdev-grafanadashboard-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=openviz.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i openvizdev-grafanadashboard-editor appscode/openvizdev-grafanadashboard-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i openvizdev-grafanadashboard-editor appscode/openvizdev-grafanadashboard-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/openvizdev-grafanadashboardtemplate-editor/Chart.yaml b/charts/openvizdev-grafanadashboardtemplate-editor/Chart.yaml index b5d4456f9a..378f22822c 100644 --- a/charts/openvizdev-grafanadashboardtemplate-editor/Chart.yaml +++ b/charts/openvizdev-grafanadashboardtemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"openviz.dev","version":"v1alpha1","resource":"grafanadashboardtemplates"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GrafanaDashboardTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: openvizdev-grafanadashboardtemplate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/openvizdev-grafanadashboardtemplate-editor/README.md b/charts/openvizdev-grafanadashboardtemplate-editor/README.md index eaee2f3489..42b925b7fc 100644 --- a/charts/openvizdev-grafanadashboardtemplate-editor/README.md +++ b/charts/openvizdev-grafanadashboardtemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/openvizdev-grafanadashboardtemplate-editor --version=v0.38.0 -$ helm upgrade -i openvizdev-grafanadashboardtemplate-editor appscode/openvizdev-grafanadashboardtemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/openvizdev-grafanadashboardtemplate-editor --version=v0.39.0 +$ helm upgrade -i openvizdev-grafanadashboardtemplate-editor appscode/openvizdev-grafanadashboardtemplate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GrafanaDashboardTemplate Editor on a [Kubernetes](http://ku To install/upgrade the chart with the release name `openvizdev-grafanadashboardtemplate-editor`: ```bash -$ helm upgrade -i openvizdev-grafanadashboardtemplate-editor appscode/openvizdev-grafanadashboardtemplate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i openvizdev-grafanadashboardtemplate-editor appscode/openvizdev-grafanadashboardtemplate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GrafanaDashboardTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `openvizdev-grafana Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i openvizdev-grafanadashboardtemplate-editor appscode/openvizdev-grafanadashboardtemplate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=openviz.dev/v1alpha1 +$ helm upgrade -i openvizdev-grafanadashboardtemplate-editor appscode/openvizdev-grafanadashboardtemplate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=openviz.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i openvizdev-grafanadashboardtemplate-editor appscode/openvizdev-grafanadashboardtemplate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i openvizdev-grafanadashboardtemplate-editor appscode/openvizdev-grafanadashboardtemplate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/openvizdev-grafanadatasource-editor/Chart.yaml b/charts/openvizdev-grafanadatasource-editor/Chart.yaml index 85f2d96c4f..d5b89d2772 100644 --- a/charts/openvizdev-grafanadatasource-editor/Chart.yaml +++ b/charts/openvizdev-grafanadatasource-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"openviz.dev","version":"v1alpha1","resource":"grafanadatasources"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GrafanaDatasource Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: openvizdev-grafanadatasource-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/openvizdev-grafanadatasource-editor/README.md b/charts/openvizdev-grafanadatasource-editor/README.md index d8b47b2997..c337533111 100644 --- a/charts/openvizdev-grafanadatasource-editor/README.md +++ b/charts/openvizdev-grafanadatasource-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/openvizdev-grafanadatasource-editor --version=v0.38.0 -$ helm upgrade -i openvizdev-grafanadatasource-editor appscode/openvizdev-grafanadatasource-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/openvizdev-grafanadatasource-editor --version=v0.39.0 +$ helm upgrade -i openvizdev-grafanadatasource-editor appscode/openvizdev-grafanadatasource-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GrafanaDatasource Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `openvizdev-grafanadatasource-editor`: ```bash -$ helm upgrade -i openvizdev-grafanadatasource-editor appscode/openvizdev-grafanadatasource-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i openvizdev-grafanadatasource-editor appscode/openvizdev-grafanadatasource-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GrafanaDatasource Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `openvizdev-grafana Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i openvizdev-grafanadatasource-editor appscode/openvizdev-grafanadatasource-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=openviz.dev/v1alpha1 +$ helm upgrade -i openvizdev-grafanadatasource-editor appscode/openvizdev-grafanadatasource-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=openviz.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i openvizdev-grafanadatasource-editor appscode/openvizdev-grafanadatasource-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i openvizdev-grafanadatasource-editor appscode/openvizdev-grafanadatasource-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/operatork8sappscodecom-shardconfiguration-editor/Chart.yaml b/charts/operatork8sappscodecom-shardconfiguration-editor/Chart.yaml index 215a724638..ef6481bc47 100644 --- a/charts/operatork8sappscodecom-shardconfiguration-editor/Chart.yaml +++ b/charts/operatork8sappscodecom-shardconfiguration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"operator.k8s.appscode.com","version":"v1alpha1","resource":"shardconfigurations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ShardConfiguration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: operatork8sappscodecom-shardconfiguration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/operatork8sappscodecom-shardconfiguration-editor/README.md b/charts/operatork8sappscodecom-shardconfiguration-editor/README.md index 88a4f8113b..ccf8312ea1 100644 --- a/charts/operatork8sappscodecom-shardconfiguration-editor/README.md +++ b/charts/operatork8sappscodecom-shardconfiguration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/operatork8sappscodecom-shardconfiguration-editor --version=v0.38.0 -$ helm upgrade -i operatork8sappscodecom-shardconfiguration-editor appscode/operatork8sappscodecom-shardconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/operatork8sappscodecom-shardconfiguration-editor --version=v0.39.0 +$ helm upgrade -i operatork8sappscodecom-shardconfiguration-editor appscode/operatork8sappscodecom-shardconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ShardConfiguration Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `operatork8sappscodecom-shardconfiguration-editor`: ```bash -$ helm upgrade -i operatork8sappscodecom-shardconfiguration-editor appscode/operatork8sappscodecom-shardconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i operatork8sappscodecom-shardconfiguration-editor appscode/operatork8sappscodecom-shardconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ShardConfiguration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `operatork8sappscod Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i operatork8sappscodecom-shardconfiguration-editor appscode/operatork8sappscodecom-shardconfiguration-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=operator.k8s.appscode.com/v1alpha1 +$ helm upgrade -i operatork8sappscodecom-shardconfiguration-editor appscode/operatork8sappscodecom-shardconfiguration-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=operator.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i operatork8sappscodecom-shardconfiguration-editor appscode/operatork8sappscodecom-shardconfiguration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i operatork8sappscodecom-shardconfiguration-editor appscode/operatork8sappscodecom-shardconfiguration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/operatoropenclustermanagementio-clustermanager-editor/Chart.yaml b/charts/operatoropenclustermanagementio-clustermanager-editor/Chart.yaml index 0a1b6f8187..db00372d89 100644 --- a/charts/operatoropenclustermanagementio-clustermanager-editor/Chart.yaml +++ b/charts/operatoropenclustermanagementio-clustermanager-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"operator.open-cluster-management.io","version":"v1","resource":"clustermanagers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterManager Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: operatoropenclustermanagementio-clustermanager-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/operatoropenclustermanagementio-clustermanager-editor/README.md b/charts/operatoropenclustermanagementio-clustermanager-editor/README.md index a42adc70bb..12c843a12b 100644 --- a/charts/operatoropenclustermanagementio-clustermanager-editor/README.md +++ b/charts/operatoropenclustermanagementio-clustermanager-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/operatoropenclustermanagementio-clustermanager-editor --version=v0.38.0 -$ helm upgrade -i operatoropenclustermanagementio-clustermanager-editor appscode/operatoropenclustermanagementio-clustermanager-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/operatoropenclustermanagementio-clustermanager-editor --version=v0.39.0 +$ helm upgrade -i operatoropenclustermanagementio-clustermanager-editor appscode/operatoropenclustermanagementio-clustermanager-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterManager Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `operatoropenclustermanagementio-clustermanager-editor`: ```bash -$ helm upgrade -i operatoropenclustermanagementio-clustermanager-editor appscode/operatoropenclustermanagementio-clustermanager-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i operatoropenclustermanagementio-clustermanager-editor appscode/operatoropenclustermanagementio-clustermanager-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterManager Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `operatoropencluste Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i operatoropenclustermanagementio-clustermanager-editor appscode/operatoropenclustermanagementio-clustermanager-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=operator.open-cluster-management.io/v1 +$ helm upgrade -i operatoropenclustermanagementio-clustermanager-editor appscode/operatoropenclustermanagementio-clustermanager-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=operator.open-cluster-management.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i operatoropenclustermanagementio-clustermanager-editor appscode/operatoropenclustermanagementio-clustermanager-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i operatoropenclustermanagementio-clustermanager-editor appscode/operatoropenclustermanagementio-clustermanager-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/operatoropenclustermanagementio-klusterlet-editor/Chart.yaml b/charts/operatoropenclustermanagementio-klusterlet-editor/Chart.yaml index 60a0fd1384..292214080b 100644 --- a/charts/operatoropenclustermanagementio-klusterlet-editor/Chart.yaml +++ b/charts/operatoropenclustermanagementio-klusterlet-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"operator.open-cluster-management.io","version":"v1","resource":"klusterlets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Klusterlet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: operatoropenclustermanagementio-klusterlet-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/operatoropenclustermanagementio-klusterlet-editor/README.md b/charts/operatoropenclustermanagementio-klusterlet-editor/README.md index 0928c6f97d..3b81de6f8e 100644 --- a/charts/operatoropenclustermanagementio-klusterlet-editor/README.md +++ b/charts/operatoropenclustermanagementio-klusterlet-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/operatoropenclustermanagementio-klusterlet-editor --version=v0.38.0 -$ helm upgrade -i operatoropenclustermanagementio-klusterlet-editor appscode/operatoropenclustermanagementio-klusterlet-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/operatoropenclustermanagementio-klusterlet-editor --version=v0.39.0 +$ helm upgrade -i operatoropenclustermanagementio-klusterlet-editor appscode/operatoropenclustermanagementio-klusterlet-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Klusterlet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `operatoropenclustermanagementio-klusterlet-editor`: ```bash -$ helm upgrade -i operatoropenclustermanagementio-klusterlet-editor appscode/operatoropenclustermanagementio-klusterlet-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i operatoropenclustermanagementio-klusterlet-editor appscode/operatoropenclustermanagementio-klusterlet-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Klusterlet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `operatoropencluste Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i operatoropenclustermanagementio-klusterlet-editor appscode/operatoropenclustermanagementio-klusterlet-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=operator.open-cluster-management.io/v1 +$ helm upgrade -i operatoropenclustermanagementio-klusterlet-editor appscode/operatoropenclustermanagementio-klusterlet-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=operator.open-cluster-management.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i operatoropenclustermanagementio-klusterlet-editor appscode/operatoropenclustermanagementio-klusterlet-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i operatoropenclustermanagementio-klusterlet-editor appscode/operatoropenclustermanagementio-klusterlet-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-aerospikeopsrequest-editor/Chart.yaml b/charts/opskubedbcom-aerospikeopsrequest-editor/Chart.yaml index b71e213533..cb14300a60 100644 --- a/charts/opskubedbcom-aerospikeopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-aerospikeopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"aerospikeopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AerospikeOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-aerospikeopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-aerospikeopsrequest-editor/README.md b/charts/opskubedbcom-aerospikeopsrequest-editor/README.md index 404328b819..089a26f389 100644 --- a/charts/opskubedbcom-aerospikeopsrequest-editor/README.md +++ b/charts/opskubedbcom-aerospikeopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-aerospikeopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-aerospikeopsrequest-editor appscode/opskubedbcom-aerospikeopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-aerospikeopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-aerospikeopsrequest-editor appscode/opskubedbcom-aerospikeopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AerospikeOpsRequest Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `opskubedbcom-aerospikeopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-aerospikeopsrequest-editor appscode/opskubedbcom-aerospikeopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-aerospikeopsrequest-editor appscode/opskubedbcom-aerospikeopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AerospikeOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-aeros Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-aerospikeopsrequest-editor appscode/opskubedbcom-aerospikeopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-aerospikeopsrequest-editor appscode/opskubedbcom-aerospikeopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-aerospikeopsrequest-editor appscode/opskubedbcom-aerospikeopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-aerospikeopsrequest-editor appscode/opskubedbcom-aerospikeopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-cassandraopsrequest-editor/Chart.yaml b/charts/opskubedbcom-cassandraopsrequest-editor/Chart.yaml index 549ce7bdc6..e787b6dc49 100644 --- a/charts/opskubedbcom-cassandraopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-cassandraopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"cassandraopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: CassandraOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-cassandraopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-cassandraopsrequest-editor/README.md b/charts/opskubedbcom-cassandraopsrequest-editor/README.md index 82bf94957e..3e3faeee87 100644 --- a/charts/opskubedbcom-cassandraopsrequest-editor/README.md +++ b/charts/opskubedbcom-cassandraopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-cassandraopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-cassandraopsrequest-editor appscode/opskubedbcom-cassandraopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-cassandraopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-cassandraopsrequest-editor appscode/opskubedbcom-cassandraopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CassandraOpsRequest Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `opskubedbcom-cassandraopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-cassandraopsrequest-editor appscode/opskubedbcom-cassandraopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-cassandraopsrequest-editor appscode/opskubedbcom-cassandraopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a CassandraOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-cassa Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-cassandraopsrequest-editor appscode/opskubedbcom-cassandraopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-cassandraopsrequest-editor appscode/opskubedbcom-cassandraopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-cassandraopsrequest-editor appscode/opskubedbcom-cassandraopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-cassandraopsrequest-editor appscode/opskubedbcom-cassandraopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-clickhouseopsrequest-editor/Chart.yaml b/charts/opskubedbcom-clickhouseopsrequest-editor/Chart.yaml index 1f3de58b0c..b32a602797 100644 --- a/charts/opskubedbcom-clickhouseopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-clickhouseopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"clickhouseopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClickHouseOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-clickhouseopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-clickhouseopsrequest-editor/README.md b/charts/opskubedbcom-clickhouseopsrequest-editor/README.md index e6dd319172..22d40a0c7b 100644 --- a/charts/opskubedbcom-clickhouseopsrequest-editor/README.md +++ b/charts/opskubedbcom-clickhouseopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-clickhouseopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-clickhouseopsrequest-editor appscode/opskubedbcom-clickhouseopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-clickhouseopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-clickhouseopsrequest-editor appscode/opskubedbcom-clickhouseopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClickHouseOpsRequest Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `opskubedbcom-clickhouseopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-clickhouseopsrequest-editor appscode/opskubedbcom-clickhouseopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-clickhouseopsrequest-editor appscode/opskubedbcom-clickhouseopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClickHouseOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-click Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-clickhouseopsrequest-editor appscode/opskubedbcom-clickhouseopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-clickhouseopsrequest-editor appscode/opskubedbcom-clickhouseopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-clickhouseopsrequest-editor appscode/opskubedbcom-clickhouseopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-clickhouseopsrequest-editor appscode/opskubedbcom-clickhouseopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-db2opsrequest-editor/Chart.yaml b/charts/opskubedbcom-db2opsrequest-editor/Chart.yaml index ab5224613b..b6e9a06f5d 100644 --- a/charts/opskubedbcom-db2opsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-db2opsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"db2opsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DB2OpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-db2opsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-db2opsrequest-editor/README.md b/charts/opskubedbcom-db2opsrequest-editor/README.md index 6af5cdcba0..cfac98dcfa 100644 --- a/charts/opskubedbcom-db2opsrequest-editor/README.md +++ b/charts/opskubedbcom-db2opsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-db2opsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-db2opsrequest-editor appscode/opskubedbcom-db2opsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-db2opsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-db2opsrequest-editor appscode/opskubedbcom-db2opsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DB2OpsRequest Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `opskubedbcom-db2opsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-db2opsrequest-editor appscode/opskubedbcom-db2opsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-db2opsrequest-editor appscode/opskubedbcom-db2opsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DB2OpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-db2op Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-db2opsrequest-editor appscode/opskubedbcom-db2opsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-db2opsrequest-editor appscode/opskubedbcom-db2opsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-db2opsrequest-editor appscode/opskubedbcom-db2opsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-db2opsrequest-editor appscode/opskubedbcom-db2opsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-documentdbopsrequest-editor/Chart.yaml b/charts/opskubedbcom-documentdbopsrequest-editor/Chart.yaml index d3807966fa..5c855de77b 100644 --- a/charts/opskubedbcom-documentdbopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-documentdbopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"documentdbopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DocumentDBOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-documentdbopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-documentdbopsrequest-editor/README.md b/charts/opskubedbcom-documentdbopsrequest-editor/README.md index 195c003ace..02e4378b91 100644 --- a/charts/opskubedbcom-documentdbopsrequest-editor/README.md +++ b/charts/opskubedbcom-documentdbopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-documentdbopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-documentdbopsrequest-editor appscode/opskubedbcom-documentdbopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-documentdbopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-documentdbopsrequest-editor appscode/opskubedbcom-documentdbopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DocumentDBOpsRequest Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `opskubedbcom-documentdbopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-documentdbopsrequest-editor appscode/opskubedbcom-documentdbopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-documentdbopsrequest-editor appscode/opskubedbcom-documentdbopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DocumentDBOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-docum Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-documentdbopsrequest-editor appscode/opskubedbcom-documentdbopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-documentdbopsrequest-editor appscode/opskubedbcom-documentdbopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-documentdbopsrequest-editor appscode/opskubedbcom-documentdbopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-documentdbopsrequest-editor appscode/opskubedbcom-documentdbopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-druidopsrequest-editor/Chart.yaml b/charts/opskubedbcom-druidopsrequest-editor/Chart.yaml index 6bf5711c2d..aac2388356 100644 --- a/charts/opskubedbcom-druidopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-druidopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"druidopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DruidOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-druidopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-druidopsrequest-editor/README.md b/charts/opskubedbcom-druidopsrequest-editor/README.md index 182dde478b..44a4bc0b9d 100644 --- a/charts/opskubedbcom-druidopsrequest-editor/README.md +++ b/charts/opskubedbcom-druidopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-druidopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-druidopsrequest-editor appscode/opskubedbcom-druidopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-druidopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-druidopsrequest-editor appscode/opskubedbcom-druidopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DruidOpsRequest Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `opskubedbcom-druidopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-druidopsrequest-editor appscode/opskubedbcom-druidopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-druidopsrequest-editor appscode/opskubedbcom-druidopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DruidOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-druid Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-druidopsrequest-editor appscode/opskubedbcom-druidopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-druidopsrequest-editor appscode/opskubedbcom-druidopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-druidopsrequest-editor appscode/opskubedbcom-druidopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-druidopsrequest-editor appscode/opskubedbcom-druidopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-elasticsearchopsrequest-editor/Chart.yaml b/charts/opskubedbcom-elasticsearchopsrequest-editor/Chart.yaml index 0692f0b9fa..08c17b52ed 100644 --- a/charts/opskubedbcom-elasticsearchopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-elasticsearchopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"elasticsearchopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ElasticsearchOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-elasticsearchopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-elasticsearchopsrequest-editor/README.md b/charts/opskubedbcom-elasticsearchopsrequest-editor/README.md index cf7036fbac..b33b5260c5 100644 --- a/charts/opskubedbcom-elasticsearchopsrequest-editor/README.md +++ b/charts/opskubedbcom-elasticsearchopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-elasticsearchopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-elasticsearchopsrequest-editor appscode/opskubedbcom-elasticsearchopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-elasticsearchopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-elasticsearchopsrequest-editor appscode/opskubedbcom-elasticsearchopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ElasticsearchOpsRequest Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `opskubedbcom-elasticsearchopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-elasticsearchopsrequest-editor appscode/opskubedbcom-elasticsearchopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-elasticsearchopsrequest-editor appscode/opskubedbcom-elasticsearchopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ElasticsearchOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-elast Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-elasticsearchopsrequest-editor appscode/opskubedbcom-elasticsearchopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-elasticsearchopsrequest-editor appscode/opskubedbcom-elasticsearchopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-elasticsearchopsrequest-editor appscode/opskubedbcom-elasticsearchopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-elasticsearchopsrequest-editor appscode/opskubedbcom-elasticsearchopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-etcdopsrequest-editor/Chart.yaml b/charts/opskubedbcom-etcdopsrequest-editor/Chart.yaml index c488032d26..5a1b557eb0 100644 --- a/charts/opskubedbcom-etcdopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-etcdopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"etcdopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: EtcdOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-etcdopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-etcdopsrequest-editor/README.md b/charts/opskubedbcom-etcdopsrequest-editor/README.md index 4fd94edad7..fc7f920e47 100644 --- a/charts/opskubedbcom-etcdopsrequest-editor/README.md +++ b/charts/opskubedbcom-etcdopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-etcdopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-etcdopsrequest-editor appscode/opskubedbcom-etcdopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-etcdopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-etcdopsrequest-editor appscode/opskubedbcom-etcdopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EtcdOpsRequest Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `opskubedbcom-etcdopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-etcdopsrequest-editor appscode/opskubedbcom-etcdopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-etcdopsrequest-editor appscode/opskubedbcom-etcdopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a EtcdOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-etcdo Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-etcdopsrequest-editor appscode/opskubedbcom-etcdopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-etcdopsrequest-editor appscode/opskubedbcom-etcdopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-etcdopsrequest-editor appscode/opskubedbcom-etcdopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-etcdopsrequest-editor appscode/opskubedbcom-etcdopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-hanadbopsrequest-editor/Chart.yaml b/charts/opskubedbcom-hanadbopsrequest-editor/Chart.yaml index a3f1cf8ee6..9d9972928a 100644 --- a/charts/opskubedbcom-hanadbopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-hanadbopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"hanadbopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: HanaDBOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-hanadbopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-hanadbopsrequest-editor/README.md b/charts/opskubedbcom-hanadbopsrequest-editor/README.md index 2af418f690..dc7f03f63e 100644 --- a/charts/opskubedbcom-hanadbopsrequest-editor/README.md +++ b/charts/opskubedbcom-hanadbopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-hanadbopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-hanadbopsrequest-editor appscode/opskubedbcom-hanadbopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-hanadbopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-hanadbopsrequest-editor appscode/opskubedbcom-hanadbopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HanaDBOpsRequest Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `opskubedbcom-hanadbopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-hanadbopsrequest-editor appscode/opskubedbcom-hanadbopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-hanadbopsrequest-editor appscode/opskubedbcom-hanadbopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a HanaDBOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-hanad Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-hanadbopsrequest-editor appscode/opskubedbcom-hanadbopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-hanadbopsrequest-editor appscode/opskubedbcom-hanadbopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-hanadbopsrequest-editor appscode/opskubedbcom-hanadbopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-hanadbopsrequest-editor appscode/opskubedbcom-hanadbopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-hazelcastopsrequest-editor/Chart.yaml b/charts/opskubedbcom-hazelcastopsrequest-editor/Chart.yaml index af80a7cc04..643e6e5a33 100644 --- a/charts/opskubedbcom-hazelcastopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-hazelcastopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"hazelcastopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: HazelcastOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-hazelcastopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-hazelcastopsrequest-editor/README.md b/charts/opskubedbcom-hazelcastopsrequest-editor/README.md index 61e71b7c8b..872bc6b32d 100644 --- a/charts/opskubedbcom-hazelcastopsrequest-editor/README.md +++ b/charts/opskubedbcom-hazelcastopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-hazelcastopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-hazelcastopsrequest-editor appscode/opskubedbcom-hazelcastopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-hazelcastopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-hazelcastopsrequest-editor appscode/opskubedbcom-hazelcastopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HazelcastOpsRequest Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `opskubedbcom-hazelcastopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-hazelcastopsrequest-editor appscode/opskubedbcom-hazelcastopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-hazelcastopsrequest-editor appscode/opskubedbcom-hazelcastopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a HazelcastOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-hazel Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-hazelcastopsrequest-editor appscode/opskubedbcom-hazelcastopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-hazelcastopsrequest-editor appscode/opskubedbcom-hazelcastopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-hazelcastopsrequest-editor appscode/opskubedbcom-hazelcastopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-hazelcastopsrequest-editor appscode/opskubedbcom-hazelcastopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-igniteopsrequest-editor/Chart.yaml b/charts/opskubedbcom-igniteopsrequest-editor/Chart.yaml index bfad4ef6aa..b80c1a44aa 100644 --- a/charts/opskubedbcom-igniteopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-igniteopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"igniteopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: IgniteOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-igniteopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-igniteopsrequest-editor/README.md b/charts/opskubedbcom-igniteopsrequest-editor/README.md index 485b816ed0..7084cc2ea0 100644 --- a/charts/opskubedbcom-igniteopsrequest-editor/README.md +++ b/charts/opskubedbcom-igniteopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-igniteopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-igniteopsrequest-editor appscode/opskubedbcom-igniteopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-igniteopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-igniteopsrequest-editor appscode/opskubedbcom-igniteopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a IgniteOpsRequest Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `opskubedbcom-igniteopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-igniteopsrequest-editor appscode/opskubedbcom-igniteopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-igniteopsrequest-editor appscode/opskubedbcom-igniteopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a IgniteOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-ignit Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-igniteopsrequest-editor appscode/opskubedbcom-igniteopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-igniteopsrequest-editor appscode/opskubedbcom-igniteopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-igniteopsrequest-editor appscode/opskubedbcom-igniteopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-igniteopsrequest-editor appscode/opskubedbcom-igniteopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-kafkaopsrequest-editor/Chart.yaml b/charts/opskubedbcom-kafkaopsrequest-editor/Chart.yaml index 5ce73e34e6..776206a43d 100644 --- a/charts/opskubedbcom-kafkaopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-kafkaopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"kafkaopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: KafkaOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-kafkaopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-kafkaopsrequest-editor/README.md b/charts/opskubedbcom-kafkaopsrequest-editor/README.md index 868870b119..0f1315eb43 100644 --- a/charts/opskubedbcom-kafkaopsrequest-editor/README.md +++ b/charts/opskubedbcom-kafkaopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-kafkaopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-kafkaopsrequest-editor appscode/opskubedbcom-kafkaopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-kafkaopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-kafkaopsrequest-editor appscode/opskubedbcom-kafkaopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a KafkaOpsRequest Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `opskubedbcom-kafkaopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-kafkaopsrequest-editor appscode/opskubedbcom-kafkaopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-kafkaopsrequest-editor appscode/opskubedbcom-kafkaopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a KafkaOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-kafka Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-kafkaopsrequest-editor appscode/opskubedbcom-kafkaopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-kafkaopsrequest-editor appscode/opskubedbcom-kafkaopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-kafkaopsrequest-editor appscode/opskubedbcom-kafkaopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-kafkaopsrequest-editor appscode/opskubedbcom-kafkaopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-mariadbopsrequest-editor/Chart.yaml b/charts/opskubedbcom-mariadbopsrequest-editor/Chart.yaml index 491cf05c82..ab57d547ca 100644 --- a/charts/opskubedbcom-mariadbopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-mariadbopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"mariadbopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MariaDBOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-mariadbopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-mariadbopsrequest-editor/README.md b/charts/opskubedbcom-mariadbopsrequest-editor/README.md index 691931629a..69a60f9c0e 100644 --- a/charts/opskubedbcom-mariadbopsrequest-editor/README.md +++ b/charts/opskubedbcom-mariadbopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-mariadbopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-mariadbopsrequest-editor appscode/opskubedbcom-mariadbopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-mariadbopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-mariadbopsrequest-editor appscode/opskubedbcom-mariadbopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBOpsRequest Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `opskubedbcom-mariadbopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-mariadbopsrequest-editor appscode/opskubedbcom-mariadbopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-mariadbopsrequest-editor appscode/opskubedbcom-mariadbopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MariaDBOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-maria Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-mariadbopsrequest-editor appscode/opskubedbcom-mariadbopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-mariadbopsrequest-editor appscode/opskubedbcom-mariadbopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-mariadbopsrequest-editor appscode/opskubedbcom-mariadbopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-mariadbopsrequest-editor appscode/opskubedbcom-mariadbopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-memcachedopsrequest-editor/Chart.yaml b/charts/opskubedbcom-memcachedopsrequest-editor/Chart.yaml index be786fe73d..f4c498361a 100644 --- a/charts/opskubedbcom-memcachedopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-memcachedopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"memcachedopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MemcachedOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-memcachedopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-memcachedopsrequest-editor/README.md b/charts/opskubedbcom-memcachedopsrequest-editor/README.md index 01360d124e..50add3b2f6 100644 --- a/charts/opskubedbcom-memcachedopsrequest-editor/README.md +++ b/charts/opskubedbcom-memcachedopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-memcachedopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-memcachedopsrequest-editor appscode/opskubedbcom-memcachedopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-memcachedopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-memcachedopsrequest-editor appscode/opskubedbcom-memcachedopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MemcachedOpsRequest Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `opskubedbcom-memcachedopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-memcachedopsrequest-editor appscode/opskubedbcom-memcachedopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-memcachedopsrequest-editor appscode/opskubedbcom-memcachedopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MemcachedOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-memca Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-memcachedopsrequest-editor appscode/opskubedbcom-memcachedopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-memcachedopsrequest-editor appscode/opskubedbcom-memcachedopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-memcachedopsrequest-editor appscode/opskubedbcom-memcachedopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-memcachedopsrequest-editor appscode/opskubedbcom-memcachedopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-milvusopsrequest-editor/Chart.yaml b/charts/opskubedbcom-milvusopsrequest-editor/Chart.yaml index 053604d76a..3e494226cf 100644 --- a/charts/opskubedbcom-milvusopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-milvusopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"milvusopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MilvusOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-milvusopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-milvusopsrequest-editor/README.md b/charts/opskubedbcom-milvusopsrequest-editor/README.md index 695bdb2115..ac6ed4d199 100644 --- a/charts/opskubedbcom-milvusopsrequest-editor/README.md +++ b/charts/opskubedbcom-milvusopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-milvusopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-milvusopsrequest-editor appscode/opskubedbcom-milvusopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-milvusopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-milvusopsrequest-editor appscode/opskubedbcom-milvusopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MilvusOpsRequest Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `opskubedbcom-milvusopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-milvusopsrequest-editor appscode/opskubedbcom-milvusopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-milvusopsrequest-editor appscode/opskubedbcom-milvusopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MilvusOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-milvu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-milvusopsrequest-editor appscode/opskubedbcom-milvusopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-milvusopsrequest-editor appscode/opskubedbcom-milvusopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-milvusopsrequest-editor appscode/opskubedbcom-milvusopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-milvusopsrequest-editor appscode/opskubedbcom-milvusopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-mongodbopsrequest-editor/Chart.yaml b/charts/opskubedbcom-mongodbopsrequest-editor/Chart.yaml index f13237814d..8afbe779af 100644 --- a/charts/opskubedbcom-mongodbopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-mongodbopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"mongodbopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MongoDBOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-mongodbopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-mongodbopsrequest-editor/README.md b/charts/opskubedbcom-mongodbopsrequest-editor/README.md index 1eb4ae4735..b09ba7cfbe 100644 --- a/charts/opskubedbcom-mongodbopsrequest-editor/README.md +++ b/charts/opskubedbcom-mongodbopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-mongodbopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-mongodbopsrequest-editor appscode/opskubedbcom-mongodbopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-mongodbopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-mongodbopsrequest-editor appscode/opskubedbcom-mongodbopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBOpsRequest Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `opskubedbcom-mongodbopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-mongodbopsrequest-editor appscode/opskubedbcom-mongodbopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-mongodbopsrequest-editor appscode/opskubedbcom-mongodbopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MongoDBOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-mongo Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-mongodbopsrequest-editor appscode/opskubedbcom-mongodbopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-mongodbopsrequest-editor appscode/opskubedbcom-mongodbopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-mongodbopsrequest-editor appscode/opskubedbcom-mongodbopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-mongodbopsrequest-editor appscode/opskubedbcom-mongodbopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-mssqlserveropsrequest-editor/Chart.yaml b/charts/opskubedbcom-mssqlserveropsrequest-editor/Chart.yaml index 39d91ec99e..92e39052e5 100644 --- a/charts/opskubedbcom-mssqlserveropsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-mssqlserveropsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"mssqlserveropsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLServerOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-mssqlserveropsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-mssqlserveropsrequest-editor/README.md b/charts/opskubedbcom-mssqlserveropsrequest-editor/README.md index 4229082a33..b433f472b7 100644 --- a/charts/opskubedbcom-mssqlserveropsrequest-editor/README.md +++ b/charts/opskubedbcom-mssqlserveropsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-mssqlserveropsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-mssqlserveropsrequest-editor appscode/opskubedbcom-mssqlserveropsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-mssqlserveropsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-mssqlserveropsrequest-editor appscode/opskubedbcom-mssqlserveropsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerOpsRequest Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `opskubedbcom-mssqlserveropsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-mssqlserveropsrequest-editor appscode/opskubedbcom-mssqlserveropsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-mssqlserveropsrequest-editor appscode/opskubedbcom-mssqlserveropsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLServerOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-mssql Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-mssqlserveropsrequest-editor appscode/opskubedbcom-mssqlserveropsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-mssqlserveropsrequest-editor appscode/opskubedbcom-mssqlserveropsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-mssqlserveropsrequest-editor appscode/opskubedbcom-mssqlserveropsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-mssqlserveropsrequest-editor appscode/opskubedbcom-mssqlserveropsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-mysqlopsrequest-editor/Chart.yaml b/charts/opskubedbcom-mysqlopsrequest-editor/Chart.yaml index eebcef00f2..114688e405 100644 --- a/charts/opskubedbcom-mysqlopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-mysqlopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"mysqlopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MySQLOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-mysqlopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-mysqlopsrequest-editor/README.md b/charts/opskubedbcom-mysqlopsrequest-editor/README.md index 019035fa8d..a417138ee1 100644 --- a/charts/opskubedbcom-mysqlopsrequest-editor/README.md +++ b/charts/opskubedbcom-mysqlopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-mysqlopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-mysqlopsrequest-editor appscode/opskubedbcom-mysqlopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-mysqlopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-mysqlopsrequest-editor appscode/opskubedbcom-mysqlopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLOpsRequest Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `opskubedbcom-mysqlopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-mysqlopsrequest-editor appscode/opskubedbcom-mysqlopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-mysqlopsrequest-editor appscode/opskubedbcom-mysqlopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MySQLOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-mysql Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-mysqlopsrequest-editor appscode/opskubedbcom-mysqlopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-mysqlopsrequest-editor appscode/opskubedbcom-mysqlopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-mysqlopsrequest-editor appscode/opskubedbcom-mysqlopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-mysqlopsrequest-editor appscode/opskubedbcom-mysqlopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-neo4jopsrequest-editor/Chart.yaml b/charts/opskubedbcom-neo4jopsrequest-editor/Chart.yaml index 77d4984b1c..60eb904002 100644 --- a/charts/opskubedbcom-neo4jopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-neo4jopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"neo4jopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Neo4jOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-neo4jopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-neo4jopsrequest-editor/README.md b/charts/opskubedbcom-neo4jopsrequest-editor/README.md index f7861468f1..de5b64f4de 100644 --- a/charts/opskubedbcom-neo4jopsrequest-editor/README.md +++ b/charts/opskubedbcom-neo4jopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-neo4jopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-neo4jopsrequest-editor appscode/opskubedbcom-neo4jopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-neo4jopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-neo4jopsrequest-editor appscode/opskubedbcom-neo4jopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Neo4jOpsRequest Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `opskubedbcom-neo4jopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-neo4jopsrequest-editor appscode/opskubedbcom-neo4jopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-neo4jopsrequest-editor appscode/opskubedbcom-neo4jopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Neo4jOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-neo4j Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-neo4jopsrequest-editor appscode/opskubedbcom-neo4jopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-neo4jopsrequest-editor appscode/opskubedbcom-neo4jopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-neo4jopsrequest-editor appscode/opskubedbcom-neo4jopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-neo4jopsrequest-editor appscode/opskubedbcom-neo4jopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-oracleopsrequest-editor/Chart.yaml b/charts/opskubedbcom-oracleopsrequest-editor/Chart.yaml index e4bfb696e3..c67bfd752b 100644 --- a/charts/opskubedbcom-oracleopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-oracleopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"oracleopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: OracleOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-oracleopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-oracleopsrequest-editor/README.md b/charts/opskubedbcom-oracleopsrequest-editor/README.md index f00cefdc2b..4bd24d7926 100644 --- a/charts/opskubedbcom-oracleopsrequest-editor/README.md +++ b/charts/opskubedbcom-oracleopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-oracleopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-oracleopsrequest-editor appscode/opskubedbcom-oracleopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-oracleopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-oracleopsrequest-editor appscode/opskubedbcom-oracleopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a OracleOpsRequest Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `opskubedbcom-oracleopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-oracleopsrequest-editor appscode/opskubedbcom-oracleopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-oracleopsrequest-editor appscode/opskubedbcom-oracleopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a OracleOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-oracl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-oracleopsrequest-editor appscode/opskubedbcom-oracleopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-oracleopsrequest-editor appscode/opskubedbcom-oracleopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-oracleopsrequest-editor appscode/opskubedbcom-oracleopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-oracleopsrequest-editor appscode/opskubedbcom-oracleopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-perconaxtradbopsrequest-editor/Chart.yaml b/charts/opskubedbcom-perconaxtradbopsrequest-editor/Chart.yaml index 503d653e34..d06003c433 100644 --- a/charts/opskubedbcom-perconaxtradbopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-perconaxtradbopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"perconaxtradbopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PerconaXtraDBOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-perconaxtradbopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-perconaxtradbopsrequest-editor/README.md b/charts/opskubedbcom-perconaxtradbopsrequest-editor/README.md index 8153081687..ab198a4821 100644 --- a/charts/opskubedbcom-perconaxtradbopsrequest-editor/README.md +++ b/charts/opskubedbcom-perconaxtradbopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-perconaxtradbopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-perconaxtradbopsrequest-editor appscode/opskubedbcom-perconaxtradbopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-perconaxtradbopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-perconaxtradbopsrequest-editor appscode/opskubedbcom-perconaxtradbopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PerconaXtraDBOpsRequest Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `opskubedbcom-perconaxtradbopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-perconaxtradbopsrequest-editor appscode/opskubedbcom-perconaxtradbopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-perconaxtradbopsrequest-editor appscode/opskubedbcom-perconaxtradbopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PerconaXtraDBOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-perco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-perconaxtradbopsrequest-editor appscode/opskubedbcom-perconaxtradbopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-perconaxtradbopsrequest-editor appscode/opskubedbcom-perconaxtradbopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-perconaxtradbopsrequest-editor appscode/opskubedbcom-perconaxtradbopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-perconaxtradbopsrequest-editor appscode/opskubedbcom-perconaxtradbopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-pgbounceropsrequest-editor/Chart.yaml b/charts/opskubedbcom-pgbounceropsrequest-editor/Chart.yaml index 0885e2cdc5..2ad88140f4 100644 --- a/charts/opskubedbcom-pgbounceropsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-pgbounceropsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"pgbounceropsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PgBouncerOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-pgbounceropsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-pgbounceropsrequest-editor/README.md b/charts/opskubedbcom-pgbounceropsrequest-editor/README.md index 9a13efe210..4901d1f5a6 100644 --- a/charts/opskubedbcom-pgbounceropsrequest-editor/README.md +++ b/charts/opskubedbcom-pgbounceropsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-pgbounceropsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-pgbounceropsrequest-editor appscode/opskubedbcom-pgbounceropsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-pgbounceropsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-pgbounceropsrequest-editor appscode/opskubedbcom-pgbounceropsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncerOpsRequest Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `opskubedbcom-pgbounceropsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-pgbounceropsrequest-editor appscode/opskubedbcom-pgbounceropsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-pgbounceropsrequest-editor appscode/opskubedbcom-pgbounceropsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PgBouncerOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-pgbou Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-pgbounceropsrequest-editor appscode/opskubedbcom-pgbounceropsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-pgbounceropsrequest-editor appscode/opskubedbcom-pgbounceropsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-pgbounceropsrequest-editor appscode/opskubedbcom-pgbounceropsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-pgbounceropsrequest-editor appscode/opskubedbcom-pgbounceropsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-pgpoolopsrequest-editor/Chart.yaml b/charts/opskubedbcom-pgpoolopsrequest-editor/Chart.yaml index 8a0012588a..64b709eaee 100644 --- a/charts/opskubedbcom-pgpoolopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-pgpoolopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"pgpoolopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PgpoolOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-pgpoolopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-pgpoolopsrequest-editor/README.md b/charts/opskubedbcom-pgpoolopsrequest-editor/README.md index 6af8c9bb3e..2fb87939b6 100644 --- a/charts/opskubedbcom-pgpoolopsrequest-editor/README.md +++ b/charts/opskubedbcom-pgpoolopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-pgpoolopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-pgpoolopsrequest-editor appscode/opskubedbcom-pgpoolopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-pgpoolopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-pgpoolopsrequest-editor appscode/opskubedbcom-pgpoolopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgpoolOpsRequest Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `opskubedbcom-pgpoolopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-pgpoolopsrequest-editor appscode/opskubedbcom-pgpoolopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-pgpoolopsrequest-editor appscode/opskubedbcom-pgpoolopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PgpoolOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-pgpoo Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-pgpoolopsrequest-editor appscode/opskubedbcom-pgpoolopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-pgpoolopsrequest-editor appscode/opskubedbcom-pgpoolopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-pgpoolopsrequest-editor appscode/opskubedbcom-pgpoolopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-pgpoolopsrequest-editor appscode/opskubedbcom-pgpoolopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-postgresopsrequest-editor/Chart.yaml b/charts/opskubedbcom-postgresopsrequest-editor/Chart.yaml index 7bf4ac80d8..9551af2abb 100644 --- a/charts/opskubedbcom-postgresopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-postgresopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"postgresopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PostgresOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-postgresopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-postgresopsrequest-editor/README.md b/charts/opskubedbcom-postgresopsrequest-editor/README.md index 72eff4b61c..1d6b74ad3b 100644 --- a/charts/opskubedbcom-postgresopsrequest-editor/README.md +++ b/charts/opskubedbcom-postgresopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-postgresopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-postgresopsrequest-editor appscode/opskubedbcom-postgresopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-postgresopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-postgresopsrequest-editor appscode/opskubedbcom-postgresopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresOpsRequest Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `opskubedbcom-postgresopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-postgresopsrequest-editor appscode/opskubedbcom-postgresopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-postgresopsrequest-editor appscode/opskubedbcom-postgresopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PostgresOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-postg Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-postgresopsrequest-editor appscode/opskubedbcom-postgresopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-postgresopsrequest-editor appscode/opskubedbcom-postgresopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-postgresopsrequest-editor appscode/opskubedbcom-postgresopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-postgresopsrequest-editor appscode/opskubedbcom-postgresopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-proxysqlopsrequest-editor/Chart.yaml b/charts/opskubedbcom-proxysqlopsrequest-editor/Chart.yaml index c9b45ac802..0a5f2b2ba8 100644 --- a/charts/opskubedbcom-proxysqlopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-proxysqlopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"proxysqlopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProxySQLOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-proxysqlopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-proxysqlopsrequest-editor/README.md b/charts/opskubedbcom-proxysqlopsrequest-editor/README.md index 212faf11cf..bd0a74f9f2 100644 --- a/charts/opskubedbcom-proxysqlopsrequest-editor/README.md +++ b/charts/opskubedbcom-proxysqlopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-proxysqlopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-proxysqlopsrequest-editor appscode/opskubedbcom-proxysqlopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-proxysqlopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-proxysqlopsrequest-editor appscode/opskubedbcom-proxysqlopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQLOpsRequest Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `opskubedbcom-proxysqlopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-proxysqlopsrequest-editor appscode/opskubedbcom-proxysqlopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-proxysqlopsrequest-editor appscode/opskubedbcom-proxysqlopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProxySQLOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-proxy Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-proxysqlopsrequest-editor appscode/opskubedbcom-proxysqlopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-proxysqlopsrequest-editor appscode/opskubedbcom-proxysqlopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-proxysqlopsrequest-editor appscode/opskubedbcom-proxysqlopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-proxysqlopsrequest-editor appscode/opskubedbcom-proxysqlopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-qdrantopsrequest-editor/Chart.yaml b/charts/opskubedbcom-qdrantopsrequest-editor/Chart.yaml index 824f90bd08..06fb786ce3 100644 --- a/charts/opskubedbcom-qdrantopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-qdrantopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"qdrantopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: QdrantOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-qdrantopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-qdrantopsrequest-editor/README.md b/charts/opskubedbcom-qdrantopsrequest-editor/README.md index 09f4b4290e..c96178bfda 100644 --- a/charts/opskubedbcom-qdrantopsrequest-editor/README.md +++ b/charts/opskubedbcom-qdrantopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-qdrantopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-qdrantopsrequest-editor appscode/opskubedbcom-qdrantopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-qdrantopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-qdrantopsrequest-editor appscode/opskubedbcom-qdrantopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a QdrantOpsRequest Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `opskubedbcom-qdrantopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-qdrantopsrequest-editor appscode/opskubedbcom-qdrantopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-qdrantopsrequest-editor appscode/opskubedbcom-qdrantopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a QdrantOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-qdran Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-qdrantopsrequest-editor appscode/opskubedbcom-qdrantopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-qdrantopsrequest-editor appscode/opskubedbcom-qdrantopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-qdrantopsrequest-editor appscode/opskubedbcom-qdrantopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-qdrantopsrequest-editor appscode/opskubedbcom-qdrantopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-rabbitmqopsrequest-editor/Chart.yaml b/charts/opskubedbcom-rabbitmqopsrequest-editor/Chart.yaml index 4462ca5e2a..264f0b7f10 100644 --- a/charts/opskubedbcom-rabbitmqopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-rabbitmqopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"rabbitmqopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RabbitMQOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-rabbitmqopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-rabbitmqopsrequest-editor/README.md b/charts/opskubedbcom-rabbitmqopsrequest-editor/README.md index 0504459368..bde2545cab 100644 --- a/charts/opskubedbcom-rabbitmqopsrequest-editor/README.md +++ b/charts/opskubedbcom-rabbitmqopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-rabbitmqopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-rabbitmqopsrequest-editor appscode/opskubedbcom-rabbitmqopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-rabbitmqopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-rabbitmqopsrequest-editor appscode/opskubedbcom-rabbitmqopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RabbitMQOpsRequest Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `opskubedbcom-rabbitmqopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-rabbitmqopsrequest-editor appscode/opskubedbcom-rabbitmqopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-rabbitmqopsrequest-editor appscode/opskubedbcom-rabbitmqopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RabbitMQOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-rabbi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-rabbitmqopsrequest-editor appscode/opskubedbcom-rabbitmqopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-rabbitmqopsrequest-editor appscode/opskubedbcom-rabbitmqopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-rabbitmqopsrequest-editor appscode/opskubedbcom-rabbitmqopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-rabbitmqopsrequest-editor appscode/opskubedbcom-rabbitmqopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-redisopsrequest-editor/Chart.yaml b/charts/opskubedbcom-redisopsrequest-editor/Chart.yaml index 2b3137e91e..6efb374a79 100644 --- a/charts/opskubedbcom-redisopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-redisopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"redisopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RedisOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-redisopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-redisopsrequest-editor/README.md b/charts/opskubedbcom-redisopsrequest-editor/README.md index 7e5fa2b6a8..9243791646 100644 --- a/charts/opskubedbcom-redisopsrequest-editor/README.md +++ b/charts/opskubedbcom-redisopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-redisopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-redisopsrequest-editor appscode/opskubedbcom-redisopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-redisopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-redisopsrequest-editor appscode/opskubedbcom-redisopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisOpsRequest Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `opskubedbcom-redisopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-redisopsrequest-editor appscode/opskubedbcom-redisopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-redisopsrequest-editor appscode/opskubedbcom-redisopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RedisOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-redis Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-redisopsrequest-editor appscode/opskubedbcom-redisopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-redisopsrequest-editor appscode/opskubedbcom-redisopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-redisopsrequest-editor appscode/opskubedbcom-redisopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-redisopsrequest-editor appscode/opskubedbcom-redisopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-redissentinelopsrequest-editor/Chart.yaml b/charts/opskubedbcom-redissentinelopsrequest-editor/Chart.yaml index 4fb2b2b533..696a5422c7 100644 --- a/charts/opskubedbcom-redissentinelopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-redissentinelopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"redissentinelopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RedisSentinelOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-redissentinelopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-redissentinelopsrequest-editor/README.md b/charts/opskubedbcom-redissentinelopsrequest-editor/README.md index f5492c3b9d..6c4b777ed7 100644 --- a/charts/opskubedbcom-redissentinelopsrequest-editor/README.md +++ b/charts/opskubedbcom-redissentinelopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-redissentinelopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-redissentinelopsrequest-editor appscode/opskubedbcom-redissentinelopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-redissentinelopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-redissentinelopsrequest-editor appscode/opskubedbcom-redissentinelopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisSentinelOpsRequest Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `opskubedbcom-redissentinelopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-redissentinelopsrequest-editor appscode/opskubedbcom-redissentinelopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-redissentinelopsrequest-editor appscode/opskubedbcom-redissentinelopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RedisSentinelOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-redis Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-redissentinelopsrequest-editor appscode/opskubedbcom-redissentinelopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-redissentinelopsrequest-editor appscode/opskubedbcom-redissentinelopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-redissentinelopsrequest-editor appscode/opskubedbcom-redissentinelopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-redissentinelopsrequest-editor appscode/opskubedbcom-redissentinelopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-singlestoreopsrequest-editor/Chart.yaml b/charts/opskubedbcom-singlestoreopsrequest-editor/Chart.yaml index 671bbbd09c..db003438b8 100644 --- a/charts/opskubedbcom-singlestoreopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-singlestoreopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"singlestoreopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SinglestoreOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-singlestoreopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-singlestoreopsrequest-editor/README.md b/charts/opskubedbcom-singlestoreopsrequest-editor/README.md index 67d2a2718f..15fd918e7b 100644 --- a/charts/opskubedbcom-singlestoreopsrequest-editor/README.md +++ b/charts/opskubedbcom-singlestoreopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-singlestoreopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-singlestoreopsrequest-editor appscode/opskubedbcom-singlestoreopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-singlestoreopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-singlestoreopsrequest-editor appscode/opskubedbcom-singlestoreopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SinglestoreOpsRequest Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `opskubedbcom-singlestoreopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-singlestoreopsrequest-editor appscode/opskubedbcom-singlestoreopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-singlestoreopsrequest-editor appscode/opskubedbcom-singlestoreopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SinglestoreOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-singl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-singlestoreopsrequest-editor appscode/opskubedbcom-singlestoreopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-singlestoreopsrequest-editor appscode/opskubedbcom-singlestoreopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-singlestoreopsrequest-editor appscode/opskubedbcom-singlestoreopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-singlestoreopsrequest-editor appscode/opskubedbcom-singlestoreopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-solropsrequest-editor/Chart.yaml b/charts/opskubedbcom-solropsrequest-editor/Chart.yaml index c618625c59..36d8263e65 100644 --- a/charts/opskubedbcom-solropsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-solropsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"solropsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SolrOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-solropsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-solropsrequest-editor/README.md b/charts/opskubedbcom-solropsrequest-editor/README.md index 83557c80f5..1e665c9dbe 100644 --- a/charts/opskubedbcom-solropsrequest-editor/README.md +++ b/charts/opskubedbcom-solropsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-solropsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-solropsrequest-editor appscode/opskubedbcom-solropsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-solropsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-solropsrequest-editor appscode/opskubedbcom-solropsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SolrOpsRequest Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `opskubedbcom-solropsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-solropsrequest-editor appscode/opskubedbcom-solropsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-solropsrequest-editor appscode/opskubedbcom-solropsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SolrOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-solro Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-solropsrequest-editor appscode/opskubedbcom-solropsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-solropsrequest-editor appscode/opskubedbcom-solropsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-solropsrequest-editor appscode/opskubedbcom-solropsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-solropsrequest-editor appscode/opskubedbcom-solropsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-weaviateopsrequest-editor/Chart.yaml b/charts/opskubedbcom-weaviateopsrequest-editor/Chart.yaml index 34c9ade717..45c57b919d 100644 --- a/charts/opskubedbcom-weaviateopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-weaviateopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"weaviateopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: WeaviateOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-weaviateopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-weaviateopsrequest-editor/README.md b/charts/opskubedbcom-weaviateopsrequest-editor/README.md index 7e1ac04ce8..a94cc8fe1f 100644 --- a/charts/opskubedbcom-weaviateopsrequest-editor/README.md +++ b/charts/opskubedbcom-weaviateopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-weaviateopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-weaviateopsrequest-editor appscode/opskubedbcom-weaviateopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-weaviateopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-weaviateopsrequest-editor appscode/opskubedbcom-weaviateopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a WeaviateOpsRequest Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `opskubedbcom-weaviateopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-weaviateopsrequest-editor appscode/opskubedbcom-weaviateopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-weaviateopsrequest-editor appscode/opskubedbcom-weaviateopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a WeaviateOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-weavi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-weaviateopsrequest-editor appscode/opskubedbcom-weaviateopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-weaviateopsrequest-editor appscode/opskubedbcom-weaviateopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-weaviateopsrequest-editor appscode/opskubedbcom-weaviateopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-weaviateopsrequest-editor appscode/opskubedbcom-weaviateopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-zookeeperopsrequest-editor/Chart.yaml b/charts/opskubedbcom-zookeeperopsrequest-editor/Chart.yaml index 7cc38c026a..79ec516d3e 100644 --- a/charts/opskubedbcom-zookeeperopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-zookeeperopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"zookeeperopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ZooKeeperOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-zookeeperopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubedbcom-zookeeperopsrequest-editor/README.md b/charts/opskubedbcom-zookeeperopsrequest-editor/README.md index 8e88f49c39..3548962bf1 100644 --- a/charts/opskubedbcom-zookeeperopsrequest-editor/README.md +++ b/charts/opskubedbcom-zookeeperopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-zookeeperopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubedbcom-zookeeperopsrequest-editor appscode/opskubedbcom-zookeeperopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubedbcom-zookeeperopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubedbcom-zookeeperopsrequest-editor appscode/opskubedbcom-zookeeperopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ZooKeeperOpsRequest Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `opskubedbcom-zookeeperopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-zookeeperopsrequest-editor appscode/opskubedbcom-zookeeperopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubedbcom-zookeeperopsrequest-editor appscode/opskubedbcom-zookeeperopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ZooKeeperOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-zooke Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-zookeeperopsrequest-editor appscode/opskubedbcom-zookeeperopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-zookeeperopsrequest-editor appscode/opskubedbcom-zookeeperopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-zookeeperopsrequest-editor appscode/opskubedbcom-zookeeperopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubedbcom-zookeeperopsrequest-editor appscode/opskubedbcom-zookeeperopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/opskubevaultcom-vaultopsrequest-editor/Chart.yaml b/charts/opskubevaultcom-vaultopsrequest-editor/Chart.yaml index a9d8e25218..e43608e5ee 100644 --- a/charts/opskubevaultcom-vaultopsrequest-editor/Chart.yaml +++ b/charts/opskubevaultcom-vaultopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubevault.com","version":"v1alpha1","resource":"vaultopsrequests"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: VaultOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubevaultcom-vaultopsrequest-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/opskubevaultcom-vaultopsrequest-editor/README.md b/charts/opskubevaultcom-vaultopsrequest-editor/README.md index 50cb968be5..e6ddc2a793 100644 --- a/charts/opskubevaultcom-vaultopsrequest-editor/README.md +++ b/charts/opskubevaultcom-vaultopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubevaultcom-vaultopsrequest-editor --version=v0.38.0 -$ helm upgrade -i opskubevaultcom-vaultopsrequest-editor appscode/opskubevaultcom-vaultopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/opskubevaultcom-vaultopsrequest-editor --version=v0.39.0 +$ helm upgrade -i opskubevaultcom-vaultopsrequest-editor appscode/opskubevaultcom-vaultopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VaultOpsRequest Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `opskubevaultcom-vaultopsrequest-editor`: ```bash -$ helm upgrade -i opskubevaultcom-vaultopsrequest-editor appscode/opskubevaultcom-vaultopsrequest-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i opskubevaultcom-vaultopsrequest-editor appscode/opskubevaultcom-vaultopsrequest-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a VaultOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubevaultcom-va Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubevaultcom-vaultopsrequest-editor appscode/opskubevaultcom-vaultopsrequest-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ops.kubevault.com/v1alpha1 +$ helm upgrade -i opskubevaultcom-vaultopsrequest-editor appscode/opskubevaultcom-vaultopsrequest-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ops.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubevaultcom-vaultopsrequest-editor appscode/opskubevaultcom-vaultopsrequest-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i opskubevaultcom-vaultopsrequest-editor appscode/opskubevaultcom-vaultopsrequest-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/pkgcrossplaneio-configuration-editor/Chart.yaml b/charts/pkgcrossplaneio-configuration-editor/Chart.yaml index ada5807f3e..ae0b8d742b 100644 --- a/charts/pkgcrossplaneio-configuration-editor/Chart.yaml +++ b/charts/pkgcrossplaneio-configuration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"pkg.crossplane.io","version":"v1","resource":"configurations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Configuration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: pkgcrossplaneio-configuration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/pkgcrossplaneio-configuration-editor/README.md b/charts/pkgcrossplaneio-configuration-editor/README.md index fc7f34cc50..99e3bd4856 100644 --- a/charts/pkgcrossplaneio-configuration-editor/README.md +++ b/charts/pkgcrossplaneio-configuration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/pkgcrossplaneio-configuration-editor --version=v0.38.0 -$ helm upgrade -i pkgcrossplaneio-configuration-editor appscode/pkgcrossplaneio-configuration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/pkgcrossplaneio-configuration-editor --version=v0.39.0 +$ helm upgrade -i pkgcrossplaneio-configuration-editor appscode/pkgcrossplaneio-configuration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Configuration Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `pkgcrossplaneio-configuration-editor`: ```bash -$ helm upgrade -i pkgcrossplaneio-configuration-editor appscode/pkgcrossplaneio-configuration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i pkgcrossplaneio-configuration-editor appscode/pkgcrossplaneio-configuration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Configuration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `pkgcrossplaneio-co Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-configuration-editor appscode/pkgcrossplaneio-configuration-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=pkg.crossplane.io/v1 +$ helm upgrade -i pkgcrossplaneio-configuration-editor appscode/pkgcrossplaneio-configuration-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=pkg.crossplane.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-configuration-editor appscode/pkgcrossplaneio-configuration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i pkgcrossplaneio-configuration-editor appscode/pkgcrossplaneio-configuration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/pkgcrossplaneio-configurationrevision-editor/Chart.yaml b/charts/pkgcrossplaneio-configurationrevision-editor/Chart.yaml index 0ab4d03083..31b39a1594 100644 --- a/charts/pkgcrossplaneio-configurationrevision-editor/Chart.yaml +++ b/charts/pkgcrossplaneio-configurationrevision-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"pkg.crossplane.io","version":"v1","resource":"configurationrevisions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ConfigurationRevision Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: pkgcrossplaneio-configurationrevision-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/pkgcrossplaneio-configurationrevision-editor/README.md b/charts/pkgcrossplaneio-configurationrevision-editor/README.md index 974e7cb29e..790eb3c7e2 100644 --- a/charts/pkgcrossplaneio-configurationrevision-editor/README.md +++ b/charts/pkgcrossplaneio-configurationrevision-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/pkgcrossplaneio-configurationrevision-editor --version=v0.38.0 -$ helm upgrade -i pkgcrossplaneio-configurationrevision-editor appscode/pkgcrossplaneio-configurationrevision-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/pkgcrossplaneio-configurationrevision-editor --version=v0.39.0 +$ helm upgrade -i pkgcrossplaneio-configurationrevision-editor appscode/pkgcrossplaneio-configurationrevision-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ConfigurationRevision Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `pkgcrossplaneio-configurationrevision-editor`: ```bash -$ helm upgrade -i pkgcrossplaneio-configurationrevision-editor appscode/pkgcrossplaneio-configurationrevision-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i pkgcrossplaneio-configurationrevision-editor appscode/pkgcrossplaneio-configurationrevision-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ConfigurationRevision Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `pkgcrossplaneio-co Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-configurationrevision-editor appscode/pkgcrossplaneio-configurationrevision-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=pkg.crossplane.io/v1 +$ helm upgrade -i pkgcrossplaneio-configurationrevision-editor appscode/pkgcrossplaneio-configurationrevision-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=pkg.crossplane.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-configurationrevision-editor appscode/pkgcrossplaneio-configurationrevision-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i pkgcrossplaneio-configurationrevision-editor appscode/pkgcrossplaneio-configurationrevision-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/pkgcrossplaneio-controllerconfig-editor/Chart.yaml b/charts/pkgcrossplaneio-controllerconfig-editor/Chart.yaml index fbd5cfe7c9..f422a9b34d 100644 --- a/charts/pkgcrossplaneio-controllerconfig-editor/Chart.yaml +++ b/charts/pkgcrossplaneio-controllerconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"pkg.crossplane.io","version":"v1alpha1","resource":"controllerconfigs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ControllerConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: pkgcrossplaneio-controllerconfig-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/pkgcrossplaneio-controllerconfig-editor/README.md b/charts/pkgcrossplaneio-controllerconfig-editor/README.md index 1cacd09b10..402fff9fa1 100644 --- a/charts/pkgcrossplaneio-controllerconfig-editor/README.md +++ b/charts/pkgcrossplaneio-controllerconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/pkgcrossplaneio-controllerconfig-editor --version=v0.38.0 -$ helm upgrade -i pkgcrossplaneio-controllerconfig-editor appscode/pkgcrossplaneio-controllerconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/pkgcrossplaneio-controllerconfig-editor --version=v0.39.0 +$ helm upgrade -i pkgcrossplaneio-controllerconfig-editor appscode/pkgcrossplaneio-controllerconfig-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ControllerConfig Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `pkgcrossplaneio-controllerconfig-editor`: ```bash -$ helm upgrade -i pkgcrossplaneio-controllerconfig-editor appscode/pkgcrossplaneio-controllerconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i pkgcrossplaneio-controllerconfig-editor appscode/pkgcrossplaneio-controllerconfig-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ControllerConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `pkgcrossplaneio-co Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-controllerconfig-editor appscode/pkgcrossplaneio-controllerconfig-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=pkg.crossplane.io/v1alpha1 +$ helm upgrade -i pkgcrossplaneio-controllerconfig-editor appscode/pkgcrossplaneio-controllerconfig-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=pkg.crossplane.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-controllerconfig-editor appscode/pkgcrossplaneio-controllerconfig-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i pkgcrossplaneio-controllerconfig-editor appscode/pkgcrossplaneio-controllerconfig-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/pkgcrossplaneio-lock-editor/Chart.yaml b/charts/pkgcrossplaneio-lock-editor/Chart.yaml index 6f4bd7750c..de93fd92ca 100644 --- a/charts/pkgcrossplaneio-lock-editor/Chart.yaml +++ b/charts/pkgcrossplaneio-lock-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"pkg.crossplane.io","version":"v1beta1","resource":"locks"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Lock Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: pkgcrossplaneio-lock-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/pkgcrossplaneio-lock-editor/README.md b/charts/pkgcrossplaneio-lock-editor/README.md index 6a0a23bbbc..0d9648b584 100644 --- a/charts/pkgcrossplaneio-lock-editor/README.md +++ b/charts/pkgcrossplaneio-lock-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/pkgcrossplaneio-lock-editor --version=v0.38.0 -$ helm upgrade -i pkgcrossplaneio-lock-editor appscode/pkgcrossplaneio-lock-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/pkgcrossplaneio-lock-editor --version=v0.39.0 +$ helm upgrade -i pkgcrossplaneio-lock-editor appscode/pkgcrossplaneio-lock-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Lock Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `pkgcrossplaneio-lock-editor`: ```bash -$ helm upgrade -i pkgcrossplaneio-lock-editor appscode/pkgcrossplaneio-lock-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i pkgcrossplaneio-lock-editor appscode/pkgcrossplaneio-lock-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Lock Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `pkgcrossplaneio-lo Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-lock-editor appscode/pkgcrossplaneio-lock-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=pkg.crossplane.io/v1beta1 +$ helm upgrade -i pkgcrossplaneio-lock-editor appscode/pkgcrossplaneio-lock-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=pkg.crossplane.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-lock-editor appscode/pkgcrossplaneio-lock-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i pkgcrossplaneio-lock-editor appscode/pkgcrossplaneio-lock-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/pkgcrossplaneio-provider-editor/Chart.yaml b/charts/pkgcrossplaneio-provider-editor/Chart.yaml index 3c5f43de36..f099a573c9 100644 --- a/charts/pkgcrossplaneio-provider-editor/Chart.yaml +++ b/charts/pkgcrossplaneio-provider-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"pkg.crossplane.io","version":"v1","resource":"providers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Provider Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: pkgcrossplaneio-provider-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/pkgcrossplaneio-provider-editor/README.md b/charts/pkgcrossplaneio-provider-editor/README.md index 963dcce02c..a6b3ce0352 100644 --- a/charts/pkgcrossplaneio-provider-editor/README.md +++ b/charts/pkgcrossplaneio-provider-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/pkgcrossplaneio-provider-editor --version=v0.38.0 -$ helm upgrade -i pkgcrossplaneio-provider-editor appscode/pkgcrossplaneio-provider-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/pkgcrossplaneio-provider-editor --version=v0.39.0 +$ helm upgrade -i pkgcrossplaneio-provider-editor appscode/pkgcrossplaneio-provider-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Provider Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `pkgcrossplaneio-provider-editor`: ```bash -$ helm upgrade -i pkgcrossplaneio-provider-editor appscode/pkgcrossplaneio-provider-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i pkgcrossplaneio-provider-editor appscode/pkgcrossplaneio-provider-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Provider Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `pkgcrossplaneio-pr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-provider-editor appscode/pkgcrossplaneio-provider-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=pkg.crossplane.io/v1 +$ helm upgrade -i pkgcrossplaneio-provider-editor appscode/pkgcrossplaneio-provider-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=pkg.crossplane.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-provider-editor appscode/pkgcrossplaneio-provider-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i pkgcrossplaneio-provider-editor appscode/pkgcrossplaneio-provider-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/pkgcrossplaneio-providerrevision-editor/Chart.yaml b/charts/pkgcrossplaneio-providerrevision-editor/Chart.yaml index 12eaa16ce9..fbd6a1c10c 100644 --- a/charts/pkgcrossplaneio-providerrevision-editor/Chart.yaml +++ b/charts/pkgcrossplaneio-providerrevision-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"pkg.crossplane.io","version":"v1","resource":"providerrevisions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProviderRevision Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: pkgcrossplaneio-providerrevision-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/pkgcrossplaneio-providerrevision-editor/README.md b/charts/pkgcrossplaneio-providerrevision-editor/README.md index 651b5eada6..241df389be 100644 --- a/charts/pkgcrossplaneio-providerrevision-editor/README.md +++ b/charts/pkgcrossplaneio-providerrevision-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/pkgcrossplaneio-providerrevision-editor --version=v0.38.0 -$ helm upgrade -i pkgcrossplaneio-providerrevision-editor appscode/pkgcrossplaneio-providerrevision-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/pkgcrossplaneio-providerrevision-editor --version=v0.39.0 +$ helm upgrade -i pkgcrossplaneio-providerrevision-editor appscode/pkgcrossplaneio-providerrevision-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProviderRevision Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `pkgcrossplaneio-providerrevision-editor`: ```bash -$ helm upgrade -i pkgcrossplaneio-providerrevision-editor appscode/pkgcrossplaneio-providerrevision-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i pkgcrossplaneio-providerrevision-editor appscode/pkgcrossplaneio-providerrevision-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProviderRevision Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `pkgcrossplaneio-pr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-providerrevision-editor appscode/pkgcrossplaneio-providerrevision-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=pkg.crossplane.io/v1 +$ helm upgrade -i pkgcrossplaneio-providerrevision-editor appscode/pkgcrossplaneio-providerrevision-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=pkg.crossplane.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-providerrevision-editor appscode/pkgcrossplaneio-providerrevision-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i pkgcrossplaneio-providerrevision-editor appscode/pkgcrossplaneio-providerrevision-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/policy-eviction-editor/Chart.yaml b/charts/policy-eviction-editor/Chart.yaml index 9765875490..2edb2125dd 100644 --- a/charts/policy-eviction-editor/Chart.yaml +++ b/charts/policy-eviction-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"policy","version":"v1","resource":"evictions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Eviction Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: policy-eviction-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/policy-eviction-editor/README.md b/charts/policy-eviction-editor/README.md index ea44aaf596..4f4638b2cd 100644 --- a/charts/policy-eviction-editor/README.md +++ b/charts/policy-eviction-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/policy-eviction-editor --version=v0.38.0 -$ helm upgrade -i policy-eviction-editor appscode/policy-eviction-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/policy-eviction-editor --version=v0.39.0 +$ helm upgrade -i policy-eviction-editor appscode/policy-eviction-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Eviction Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `policy-eviction-editor`: ```bash -$ helm upgrade -i policy-eviction-editor appscode/policy-eviction-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i policy-eviction-editor appscode/policy-eviction-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Eviction Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `policy-eviction-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i policy-eviction-editor appscode/policy-eviction-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=policy/v1 +$ helm upgrade -i policy-eviction-editor appscode/policy-eviction-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=policy/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i policy-eviction-editor appscode/policy-eviction-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i policy-eviction-editor appscode/policy-eviction-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/policy-poddisruptionbudget-editor/Chart.yaml b/charts/policy-poddisruptionbudget-editor/Chart.yaml index 9a2ddff351..0442f0aed6 100644 --- a/charts/policy-poddisruptionbudget-editor/Chart.yaml +++ b/charts/policy-poddisruptionbudget-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"policy","version":"v1","resource":"poddisruptionbudgets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PodDisruptionBudget Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: policy-poddisruptionbudget-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/policy-poddisruptionbudget-editor/README.md b/charts/policy-poddisruptionbudget-editor/README.md index c9bb92c367..32497e5e5f 100644 --- a/charts/policy-poddisruptionbudget-editor/README.md +++ b/charts/policy-poddisruptionbudget-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/policy-poddisruptionbudget-editor --version=v0.38.0 -$ helm upgrade -i policy-poddisruptionbudget-editor appscode/policy-poddisruptionbudget-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/policy-poddisruptionbudget-editor --version=v0.39.0 +$ helm upgrade -i policy-poddisruptionbudget-editor appscode/policy-poddisruptionbudget-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PodDisruptionBudget Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `policy-poddisruptionbudget-editor`: ```bash -$ helm upgrade -i policy-poddisruptionbudget-editor appscode/policy-poddisruptionbudget-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i policy-poddisruptionbudget-editor appscode/policy-poddisruptionbudget-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PodDisruptionBudget Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `policy-poddisrupti Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i policy-poddisruptionbudget-editor appscode/policy-poddisruptionbudget-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=policy/v1 +$ helm upgrade -i policy-poddisruptionbudget-editor appscode/policy-poddisruptionbudget-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=policy/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i policy-poddisruptionbudget-editor appscode/policy-poddisruptionbudget-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i policy-poddisruptionbudget-editor appscode/policy-poddisruptionbudget-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/policy-podsecuritypolicy-editor/Chart.yaml b/charts/policy-podsecuritypolicy-editor/Chart.yaml index ce70a59d48..36322297ac 100644 --- a/charts/policy-podsecuritypolicy-editor/Chart.yaml +++ b/charts/policy-podsecuritypolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"policy","version":"v1beta1","resource":"podsecuritypolicies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PodSecurityPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: policy-podsecuritypolicy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/policy-podsecuritypolicy-editor/README.md b/charts/policy-podsecuritypolicy-editor/README.md index a26b8e6dc7..312ff709f9 100644 --- a/charts/policy-podsecuritypolicy-editor/README.md +++ b/charts/policy-podsecuritypolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/policy-podsecuritypolicy-editor --version=v0.38.0 -$ helm upgrade -i policy-podsecuritypolicy-editor appscode/policy-podsecuritypolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/policy-podsecuritypolicy-editor --version=v0.39.0 +$ helm upgrade -i policy-podsecuritypolicy-editor appscode/policy-podsecuritypolicy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PodSecurityPolicy Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `policy-podsecuritypolicy-editor`: ```bash -$ helm upgrade -i policy-podsecuritypolicy-editor appscode/policy-podsecuritypolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i policy-podsecuritypolicy-editor appscode/policy-podsecuritypolicy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PodSecurityPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `policy-podsecurity Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i policy-podsecuritypolicy-editor appscode/policy-podsecuritypolicy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=policy/v1beta1 +$ helm upgrade -i policy-podsecuritypolicy-editor appscode/policy-podsecuritypolicy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=policy/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i policy-podsecuritypolicy-editor appscode/policy-podsecuritypolicy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i policy-podsecuritypolicy-editor appscode/policy-podsecuritypolicy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/policykubevaultcom-vaultpolicy-editor/Chart.yaml b/charts/policykubevaultcom-vaultpolicy-editor/Chart.yaml index d23a529ebc..11f1f86dc0 100644 --- a/charts/policykubevaultcom-vaultpolicy-editor/Chart.yaml +++ b/charts/policykubevaultcom-vaultpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"policy.kubevault.com","version":"v1alpha1","resource":"vaultpolicies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: VaultPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: policykubevaultcom-vaultpolicy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/policykubevaultcom-vaultpolicy-editor/README.md b/charts/policykubevaultcom-vaultpolicy-editor/README.md index 36a046ee61..613bcc9a2d 100644 --- a/charts/policykubevaultcom-vaultpolicy-editor/README.md +++ b/charts/policykubevaultcom-vaultpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/policykubevaultcom-vaultpolicy-editor --version=v0.38.0 -$ helm upgrade -i policykubevaultcom-vaultpolicy-editor appscode/policykubevaultcom-vaultpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/policykubevaultcom-vaultpolicy-editor --version=v0.39.0 +$ helm upgrade -i policykubevaultcom-vaultpolicy-editor appscode/policykubevaultcom-vaultpolicy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VaultPolicy Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `policykubevaultcom-vaultpolicy-editor`: ```bash -$ helm upgrade -i policykubevaultcom-vaultpolicy-editor appscode/policykubevaultcom-vaultpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i policykubevaultcom-vaultpolicy-editor appscode/policykubevaultcom-vaultpolicy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a VaultPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `policykubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i policykubevaultcom-vaultpolicy-editor appscode/policykubevaultcom-vaultpolicy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=policy.kubevault.com/v1alpha1 +$ helm upgrade -i policykubevaultcom-vaultpolicy-editor appscode/policykubevaultcom-vaultpolicy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=policy.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i policykubevaultcom-vaultpolicy-editor appscode/policykubevaultcom-vaultpolicy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i policykubevaultcom-vaultpolicy-editor appscode/policykubevaultcom-vaultpolicy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/policykubevaultcom-vaultpolicybinding-editor/Chart.yaml b/charts/policykubevaultcom-vaultpolicybinding-editor/Chart.yaml index 78322408c4..e3f193365f 100644 --- a/charts/policykubevaultcom-vaultpolicybinding-editor/Chart.yaml +++ b/charts/policykubevaultcom-vaultpolicybinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"policy.kubevault.com","version":"v1alpha1","resource":"vaultpolicybindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: VaultPolicyBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: policykubevaultcom-vaultpolicybinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/policykubevaultcom-vaultpolicybinding-editor/README.md b/charts/policykubevaultcom-vaultpolicybinding-editor/README.md index e7662642c8..8c6ad2c4e7 100644 --- a/charts/policykubevaultcom-vaultpolicybinding-editor/README.md +++ b/charts/policykubevaultcom-vaultpolicybinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/policykubevaultcom-vaultpolicybinding-editor --version=v0.38.0 -$ helm upgrade -i policykubevaultcom-vaultpolicybinding-editor appscode/policykubevaultcom-vaultpolicybinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/policykubevaultcom-vaultpolicybinding-editor --version=v0.39.0 +$ helm upgrade -i policykubevaultcom-vaultpolicybinding-editor appscode/policykubevaultcom-vaultpolicybinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VaultPolicyBinding Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `policykubevaultcom-vaultpolicybinding-editor`: ```bash -$ helm upgrade -i policykubevaultcom-vaultpolicybinding-editor appscode/policykubevaultcom-vaultpolicybinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i policykubevaultcom-vaultpolicybinding-editor appscode/policykubevaultcom-vaultpolicybinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a VaultPolicyBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `policykubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i policykubevaultcom-vaultpolicybinding-editor appscode/policykubevaultcom-vaultpolicybinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=policy.kubevault.com/v1alpha1 +$ helm upgrade -i policykubevaultcom-vaultpolicybinding-editor appscode/policykubevaultcom-vaultpolicybinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=policy.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i policykubevaultcom-vaultpolicybinding-editor appscode/policykubevaultcom-vaultpolicybinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i policykubevaultcom-vaultpolicybinding-editor appscode/policykubevaultcom-vaultpolicybinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/postgreskubedbcom-publisher-editor/Chart.yaml b/charts/postgreskubedbcom-publisher-editor/Chart.yaml index ae5cf9e99b..9088b3ab53 100644 --- a/charts/postgreskubedbcom-publisher-editor/Chart.yaml +++ b/charts/postgreskubedbcom-publisher-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"postgres.kubedb.com","version":"v1alpha1","resource":"publishers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Publisher Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: postgreskubedbcom-publisher-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/postgreskubedbcom-publisher-editor/README.md b/charts/postgreskubedbcom-publisher-editor/README.md index 41ab8911e9..c9291072eb 100644 --- a/charts/postgreskubedbcom-publisher-editor/README.md +++ b/charts/postgreskubedbcom-publisher-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/postgreskubedbcom-publisher-editor --version=v0.38.0 -$ helm upgrade -i postgreskubedbcom-publisher-editor appscode/postgreskubedbcom-publisher-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/postgreskubedbcom-publisher-editor --version=v0.39.0 +$ helm upgrade -i postgreskubedbcom-publisher-editor appscode/postgreskubedbcom-publisher-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Publisher Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `postgreskubedbcom-publisher-editor`: ```bash -$ helm upgrade -i postgreskubedbcom-publisher-editor appscode/postgreskubedbcom-publisher-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i postgreskubedbcom-publisher-editor appscode/postgreskubedbcom-publisher-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Publisher Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `postgreskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i postgreskubedbcom-publisher-editor appscode/postgreskubedbcom-publisher-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=postgres.kubedb.com/v1alpha1 +$ helm upgrade -i postgreskubedbcom-publisher-editor appscode/postgreskubedbcom-publisher-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=postgres.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i postgreskubedbcom-publisher-editor appscode/postgreskubedbcom-publisher-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i postgreskubedbcom-publisher-editor appscode/postgreskubedbcom-publisher-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/postgreskubedbcom-subscriber-editor/Chart.yaml b/charts/postgreskubedbcom-subscriber-editor/Chart.yaml index 275acc6a82..f16c82862b 100644 --- a/charts/postgreskubedbcom-subscriber-editor/Chart.yaml +++ b/charts/postgreskubedbcom-subscriber-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"postgres.kubedb.com","version":"v1alpha1","resource":"subscribers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Subscriber Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: postgreskubedbcom-subscriber-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/postgreskubedbcom-subscriber-editor/README.md b/charts/postgreskubedbcom-subscriber-editor/README.md index ebd6462a1a..59a029c1fa 100644 --- a/charts/postgreskubedbcom-subscriber-editor/README.md +++ b/charts/postgreskubedbcom-subscriber-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/postgreskubedbcom-subscriber-editor --version=v0.38.0 -$ helm upgrade -i postgreskubedbcom-subscriber-editor appscode/postgreskubedbcom-subscriber-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/postgreskubedbcom-subscriber-editor --version=v0.39.0 +$ helm upgrade -i postgreskubedbcom-subscriber-editor appscode/postgreskubedbcom-subscriber-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Subscriber Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `postgreskubedbcom-subscriber-editor`: ```bash -$ helm upgrade -i postgreskubedbcom-subscriber-editor appscode/postgreskubedbcom-subscriber-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i postgreskubedbcom-subscriber-editor appscode/postgreskubedbcom-subscriber-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Subscriber Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `postgreskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i postgreskubedbcom-subscriber-editor appscode/postgreskubedbcom-subscriber-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=postgres.kubedb.com/v1alpha1 +$ helm upgrade -i postgreskubedbcom-subscriber-editor appscode/postgreskubedbcom-subscriber-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=postgres.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i postgreskubedbcom-subscriber-editor appscode/postgreskubedbcom-subscriber-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i postgreskubedbcom-subscriber-editor appscode/postgreskubedbcom-subscriber-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/productsxhelmdev-plan-editor/Chart.yaml b/charts/productsxhelmdev-plan-editor/Chart.yaml index a66c376f22..a1829f9a78 100644 --- a/charts/productsxhelmdev-plan-editor/Chart.yaml +++ b/charts/productsxhelmdev-plan-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"products.x-helm.dev","version":"v1alpha1","resource":"plans"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Plan Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: productsxhelmdev-plan-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/productsxhelmdev-plan-editor/README.md b/charts/productsxhelmdev-plan-editor/README.md index ef3c059c6a..e2d011efea 100644 --- a/charts/productsxhelmdev-plan-editor/README.md +++ b/charts/productsxhelmdev-plan-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/productsxhelmdev-plan-editor --version=v0.38.0 -$ helm upgrade -i productsxhelmdev-plan-editor appscode/productsxhelmdev-plan-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/productsxhelmdev-plan-editor --version=v0.39.0 +$ helm upgrade -i productsxhelmdev-plan-editor appscode/productsxhelmdev-plan-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Plan Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `productsxhelmdev-plan-editor`: ```bash -$ helm upgrade -i productsxhelmdev-plan-editor appscode/productsxhelmdev-plan-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i productsxhelmdev-plan-editor appscode/productsxhelmdev-plan-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Plan Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `productsxhelmdev-p Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i productsxhelmdev-plan-editor appscode/productsxhelmdev-plan-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=products.x-helm.dev/v1alpha1 +$ helm upgrade -i productsxhelmdev-plan-editor appscode/productsxhelmdev-plan-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=products.x-helm.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i productsxhelmdev-plan-editor appscode/productsxhelmdev-plan-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i productsxhelmdev-plan-editor appscode/productsxhelmdev-plan-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/productsxhelmdev-product-editor/Chart.yaml b/charts/productsxhelmdev-product-editor/Chart.yaml index 8aa7be0164..cc593f6aa7 100644 --- a/charts/productsxhelmdev-product-editor/Chart.yaml +++ b/charts/productsxhelmdev-product-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"products.x-helm.dev","version":"v1alpha1","resource":"products"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Product Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: productsxhelmdev-product-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/productsxhelmdev-product-editor/README.md b/charts/productsxhelmdev-product-editor/README.md index 6fe82d1727..8ec8fed0d2 100644 --- a/charts/productsxhelmdev-product-editor/README.md +++ b/charts/productsxhelmdev-product-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/productsxhelmdev-product-editor --version=v0.38.0 -$ helm upgrade -i productsxhelmdev-product-editor appscode/productsxhelmdev-product-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/productsxhelmdev-product-editor --version=v0.39.0 +$ helm upgrade -i productsxhelmdev-product-editor appscode/productsxhelmdev-product-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Product Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `productsxhelmdev-product-editor`: ```bash -$ helm upgrade -i productsxhelmdev-product-editor appscode/productsxhelmdev-product-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i productsxhelmdev-product-editor appscode/productsxhelmdev-product-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Product Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `productsxhelmdev-p Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i productsxhelmdev-product-editor appscode/productsxhelmdev-product-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=products.x-helm.dev/v1alpha1 +$ helm upgrade -i productsxhelmdev-product-editor appscode/productsxhelmdev-product-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=products.x-helm.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i productsxhelmdev-product-editor appscode/productsxhelmdev-product-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i productsxhelmdev-product-editor appscode/productsxhelmdev-product-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/projectopenshiftio-project-editor/Chart.yaml b/charts/projectopenshiftio-project-editor/Chart.yaml index c7822005c7..832c6c68ba 100644 --- a/charts/projectopenshiftio-project-editor/Chart.yaml +++ b/charts/projectopenshiftio-project-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"project.openshift.io","version":"v1","resource":"projects"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Project Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: projectopenshiftio-project-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/projectopenshiftio-project-editor/README.md b/charts/projectopenshiftio-project-editor/README.md index d4586b322b..84e26ef329 100644 --- a/charts/projectopenshiftio-project-editor/README.md +++ b/charts/projectopenshiftio-project-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/projectopenshiftio-project-editor --version=v0.38.0 -$ helm upgrade -i projectopenshiftio-project-editor appscode/projectopenshiftio-project-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/projectopenshiftio-project-editor --version=v0.39.0 +$ helm upgrade -i projectopenshiftio-project-editor appscode/projectopenshiftio-project-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Project Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `projectopenshiftio-project-editor`: ```bash -$ helm upgrade -i projectopenshiftio-project-editor appscode/projectopenshiftio-project-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i projectopenshiftio-project-editor appscode/projectopenshiftio-project-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Project Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `projectopenshiftio Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i projectopenshiftio-project-editor appscode/projectopenshiftio-project-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=project.openshift.io/v1 +$ helm upgrade -i projectopenshiftio-project-editor appscode/projectopenshiftio-project-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=project.openshift.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i projectopenshiftio-project-editor appscode/projectopenshiftio-project-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i projectopenshiftio-project-editor appscode/projectopenshiftio-project-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/proxyopenclustermanagementio-managedproxyconfiguration-editor/Chart.yaml b/charts/proxyopenclustermanagementio-managedproxyconfiguration-editor/Chart.yaml index da685deab0..12839fd28f 100644 --- a/charts/proxyopenclustermanagementio-managedproxyconfiguration-editor/Chart.yaml +++ b/charts/proxyopenclustermanagementio-managedproxyconfiguration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"proxy.open-cluster-management.io","version":"v1alpha1","resource":"managedproxyconfigurations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ManagedProxyConfiguration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: proxyopenclustermanagementio-managedproxyconfiguration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/proxyopenclustermanagementio-managedproxyconfiguration-editor/README.md b/charts/proxyopenclustermanagementio-managedproxyconfiguration-editor/README.md index 8846531d0f..96443d71ba 100644 --- a/charts/proxyopenclustermanagementio-managedproxyconfiguration-editor/README.md +++ b/charts/proxyopenclustermanagementio-managedproxyconfiguration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/proxyopenclustermanagementio-managedproxyconfiguration-editor --version=v0.38.0 -$ helm upgrade -i proxyopenclustermanagementio-managedproxyconfiguration-editor appscode/proxyopenclustermanagementio-managedproxyconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/proxyopenclustermanagementio-managedproxyconfiguration-editor --version=v0.39.0 +$ helm upgrade -i proxyopenclustermanagementio-managedproxyconfiguration-editor appscode/proxyopenclustermanagementio-managedproxyconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManagedProxyConfiguration Editor on a [Kubernetes](http://k To install/upgrade the chart with the release name `proxyopenclustermanagementio-managedproxyconfiguration-editor`: ```bash -$ helm upgrade -i proxyopenclustermanagementio-managedproxyconfiguration-editor appscode/proxyopenclustermanagementio-managedproxyconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i proxyopenclustermanagementio-managedproxyconfiguration-editor appscode/proxyopenclustermanagementio-managedproxyconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ManagedProxyConfiguration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `proxyopenclusterma Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i proxyopenclustermanagementio-managedproxyconfiguration-editor appscode/proxyopenclustermanagementio-managedproxyconfiguration-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=proxy.open-cluster-management.io/v1alpha1 +$ helm upgrade -i proxyopenclustermanagementio-managedproxyconfiguration-editor appscode/proxyopenclustermanagementio-managedproxyconfiguration-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=proxy.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i proxyopenclustermanagementio-managedproxyconfiguration-editor appscode/proxyopenclustermanagementio-managedproxyconfiguration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i proxyopenclustermanagementio-managedproxyconfiguration-editor appscode/proxyopenclustermanagementio-managedproxyconfiguration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/proxyopenclustermanagementio-managedproxyserviceresolver-editor/Chart.yaml b/charts/proxyopenclustermanagementio-managedproxyserviceresolver-editor/Chart.yaml index c8a4a86602..d0bb19fa34 100644 --- a/charts/proxyopenclustermanagementio-managedproxyserviceresolver-editor/Chart.yaml +++ b/charts/proxyopenclustermanagementio-managedproxyserviceresolver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"proxy.open-cluster-management.io","version":"v1alpha1","resource":"managedproxyserviceresolvers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ManagedProxyServiceResolver Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: proxyopenclustermanagementio-managedproxyserviceresolver-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/proxyopenclustermanagementio-managedproxyserviceresolver-editor/README.md b/charts/proxyopenclustermanagementio-managedproxyserviceresolver-editor/README.md index 9ef07d99db..6bc59e46c7 100644 --- a/charts/proxyopenclustermanagementio-managedproxyserviceresolver-editor/README.md +++ b/charts/proxyopenclustermanagementio-managedproxyserviceresolver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/proxyopenclustermanagementio-managedproxyserviceresolver-editor --version=v0.38.0 -$ helm upgrade -i proxyopenclustermanagementio-managedproxyserviceresolver-editor appscode/proxyopenclustermanagementio-managedproxyserviceresolver-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/proxyopenclustermanagementio-managedproxyserviceresolver-editor --version=v0.39.0 +$ helm upgrade -i proxyopenclustermanagementio-managedproxyserviceresolver-editor appscode/proxyopenclustermanagementio-managedproxyserviceresolver-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManagedProxyServiceResolver Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `proxyopenclustermanagementio-managedproxyserviceresolver-editor`: ```bash -$ helm upgrade -i proxyopenclustermanagementio-managedproxyserviceresolver-editor appscode/proxyopenclustermanagementio-managedproxyserviceresolver-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i proxyopenclustermanagementio-managedproxyserviceresolver-editor appscode/proxyopenclustermanagementio-managedproxyserviceresolver-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ManagedProxyServiceResolver Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `proxyopenclusterma Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i proxyopenclustermanagementio-managedproxyserviceresolver-editor appscode/proxyopenclustermanagementio-managedproxyserviceresolver-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=proxy.open-cluster-management.io/v1alpha1 +$ helm upgrade -i proxyopenclustermanagementio-managedproxyserviceresolver-editor appscode/proxyopenclustermanagementio-managedproxyserviceresolver-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=proxy.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i proxyopenclustermanagementio-managedproxyserviceresolver-editor appscode/proxyopenclustermanagementio-managedproxyserviceresolver-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i proxyopenclustermanagementio-managedproxyserviceresolver-editor appscode/proxyopenclustermanagementio-managedproxyserviceresolver-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rbacauthorizationk8sio-clusterrole-editor/Chart.yaml b/charts/rbacauthorizationk8sio-clusterrole-editor/Chart.yaml index 9b11c7d43f..e56acd5836 100644 --- a/charts/rbacauthorizationk8sio-clusterrole-editor/Chart.yaml +++ b/charts/rbacauthorizationk8sio-clusterrole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rbac.authorization.k8s.io","version":"v1","resource":"clusterroles"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rbacauthorizationk8sio-clusterrole-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rbacauthorizationk8sio-clusterrole-editor/README.md b/charts/rbacauthorizationk8sio-clusterrole-editor/README.md index 375170d50b..5118e36242 100644 --- a/charts/rbacauthorizationk8sio-clusterrole-editor/README.md +++ b/charts/rbacauthorizationk8sio-clusterrole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rbacauthorizationk8sio-clusterrole-editor --version=v0.38.0 -$ helm upgrade -i rbacauthorizationk8sio-clusterrole-editor appscode/rbacauthorizationk8sio-clusterrole-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rbacauthorizationk8sio-clusterrole-editor --version=v0.39.0 +$ helm upgrade -i rbacauthorizationk8sio-clusterrole-editor appscode/rbacauthorizationk8sio-clusterrole-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterRole Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `rbacauthorizationk8sio-clusterrole-editor`: ```bash -$ helm upgrade -i rbacauthorizationk8sio-clusterrole-editor appscode/rbacauthorizationk8sio-clusterrole-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rbacauthorizationk8sio-clusterrole-editor appscode/rbacauthorizationk8sio-clusterrole-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rbacauthorizationk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rbacauthorizationk8sio-clusterrole-editor appscode/rbacauthorizationk8sio-clusterrole-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rbac.authorization.k8s.io/v1 +$ helm upgrade -i rbacauthorizationk8sio-clusterrole-editor appscode/rbacauthorizationk8sio-clusterrole-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rbac.authorization.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rbacauthorizationk8sio-clusterrole-editor appscode/rbacauthorizationk8sio-clusterrole-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rbacauthorizationk8sio-clusterrole-editor appscode/rbacauthorizationk8sio-clusterrole-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rbacauthorizationk8sio-clusterrolebinding-editor/Chart.yaml b/charts/rbacauthorizationk8sio-clusterrolebinding-editor/Chart.yaml index 6004a4fc9d..08a14a8861 100644 --- a/charts/rbacauthorizationk8sio-clusterrolebinding-editor/Chart.yaml +++ b/charts/rbacauthorizationk8sio-clusterrolebinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rbac.authorization.k8s.io","version":"v1","resource":"clusterrolebindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterRoleBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rbacauthorizationk8sio-clusterrolebinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rbacauthorizationk8sio-clusterrolebinding-editor/README.md b/charts/rbacauthorizationk8sio-clusterrolebinding-editor/README.md index 0f302108da..7af5dcfdc4 100644 --- a/charts/rbacauthorizationk8sio-clusterrolebinding-editor/README.md +++ b/charts/rbacauthorizationk8sio-clusterrolebinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rbacauthorizationk8sio-clusterrolebinding-editor --version=v0.38.0 -$ helm upgrade -i rbacauthorizationk8sio-clusterrolebinding-editor appscode/rbacauthorizationk8sio-clusterrolebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rbacauthorizationk8sio-clusterrolebinding-editor --version=v0.39.0 +$ helm upgrade -i rbacauthorizationk8sio-clusterrolebinding-editor appscode/rbacauthorizationk8sio-clusterrolebinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterRoleBinding Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `rbacauthorizationk8sio-clusterrolebinding-editor`: ```bash -$ helm upgrade -i rbacauthorizationk8sio-clusterrolebinding-editor appscode/rbacauthorizationk8sio-clusterrolebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rbacauthorizationk8sio-clusterrolebinding-editor appscode/rbacauthorizationk8sio-clusterrolebinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterRoleBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rbacauthorizationk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rbacauthorizationk8sio-clusterrolebinding-editor appscode/rbacauthorizationk8sio-clusterrolebinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rbac.authorization.k8s.io/v1 +$ helm upgrade -i rbacauthorizationk8sio-clusterrolebinding-editor appscode/rbacauthorizationk8sio-clusterrolebinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rbac.authorization.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rbacauthorizationk8sio-clusterrolebinding-editor appscode/rbacauthorizationk8sio-clusterrolebinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rbacauthorizationk8sio-clusterrolebinding-editor appscode/rbacauthorizationk8sio-clusterrolebinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rbacauthorizationk8sio-role-editor/Chart.yaml b/charts/rbacauthorizationk8sio-role-editor/Chart.yaml index 636dfb9552..4cd1853d6c 100644 --- a/charts/rbacauthorizationk8sio-role-editor/Chart.yaml +++ b/charts/rbacauthorizationk8sio-role-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rbac.authorization.k8s.io","version":"v1","resource":"roles"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Role Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rbacauthorizationk8sio-role-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rbacauthorizationk8sio-role-editor/README.md b/charts/rbacauthorizationk8sio-role-editor/README.md index 705aadd3a6..17bf796125 100644 --- a/charts/rbacauthorizationk8sio-role-editor/README.md +++ b/charts/rbacauthorizationk8sio-role-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rbacauthorizationk8sio-role-editor --version=v0.38.0 -$ helm upgrade -i rbacauthorizationk8sio-role-editor appscode/rbacauthorizationk8sio-role-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rbacauthorizationk8sio-role-editor --version=v0.39.0 +$ helm upgrade -i rbacauthorizationk8sio-role-editor appscode/rbacauthorizationk8sio-role-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Role Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `rbacauthorizationk8sio-role-editor`: ```bash -$ helm upgrade -i rbacauthorizationk8sio-role-editor appscode/rbacauthorizationk8sio-role-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rbacauthorizationk8sio-role-editor appscode/rbacauthorizationk8sio-role-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Role Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rbacauthorizationk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rbacauthorizationk8sio-role-editor appscode/rbacauthorizationk8sio-role-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rbac.authorization.k8s.io/v1 +$ helm upgrade -i rbacauthorizationk8sio-role-editor appscode/rbacauthorizationk8sio-role-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rbac.authorization.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rbacauthorizationk8sio-role-editor appscode/rbacauthorizationk8sio-role-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rbacauthorizationk8sio-role-editor appscode/rbacauthorizationk8sio-role-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rbacauthorizationk8sio-rolebinding-editor/Chart.yaml b/charts/rbacauthorizationk8sio-rolebinding-editor/Chart.yaml index 3083cefa85..a935cb1cb9 100644 --- a/charts/rbacauthorizationk8sio-rolebinding-editor/Chart.yaml +++ b/charts/rbacauthorizationk8sio-rolebinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rbac.authorization.k8s.io","version":"v1","resource":"rolebindings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RoleBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rbacauthorizationk8sio-rolebinding-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rbacauthorizationk8sio-rolebinding-editor/README.md b/charts/rbacauthorizationk8sio-rolebinding-editor/README.md index a380812fda..7b6c288aa1 100644 --- a/charts/rbacauthorizationk8sio-rolebinding-editor/README.md +++ b/charts/rbacauthorizationk8sio-rolebinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rbacauthorizationk8sio-rolebinding-editor --version=v0.38.0 -$ helm upgrade -i rbacauthorizationk8sio-rolebinding-editor appscode/rbacauthorizationk8sio-rolebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rbacauthorizationk8sio-rolebinding-editor --version=v0.39.0 +$ helm upgrade -i rbacauthorizationk8sio-rolebinding-editor appscode/rbacauthorizationk8sio-rolebinding-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RoleBinding Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `rbacauthorizationk8sio-rolebinding-editor`: ```bash -$ helm upgrade -i rbacauthorizationk8sio-rolebinding-editor appscode/rbacauthorizationk8sio-rolebinding-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rbacauthorizationk8sio-rolebinding-editor appscode/rbacauthorizationk8sio-rolebinding-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RoleBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rbacauthorizationk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rbacauthorizationk8sio-rolebinding-editor appscode/rbacauthorizationk8sio-rolebinding-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rbac.authorization.k8s.io/v1 +$ helm upgrade -i rbacauthorizationk8sio-rolebinding-editor appscode/rbacauthorizationk8sio-rolebinding-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rbac.authorization.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rbacauthorizationk8sio-rolebinding-editor appscode/rbacauthorizationk8sio-rolebinding-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rbacauthorizationk8sio-rolebinding-editor appscode/rbacauthorizationk8sio-rolebinding-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-cluster-editor/Chart.yaml b/charts/rdsawskubedbcom-cluster-editor/Chart.yaml index 6ce4afb4b9..a0650000df 100644 --- a/charts/rdsawskubedbcom-cluster-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-cluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"clusters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Cluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-cluster-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rdsawskubedbcom-cluster-editor/README.md b/charts/rdsawskubedbcom-cluster-editor/README.md index 440b5a5652..1eb7f7a155 100644 --- a/charts/rdsawskubedbcom-cluster-editor/README.md +++ b/charts/rdsawskubedbcom-cluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-cluster-editor --version=v0.38.0 -$ helm upgrade -i rdsawskubedbcom-cluster-editor appscode/rdsawskubedbcom-cluster-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rdsawskubedbcom-cluster-editor --version=v0.39.0 +$ helm upgrade -i rdsawskubedbcom-cluster-editor appscode/rdsawskubedbcom-cluster-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Cluster Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `rdsawskubedbcom-cluster-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-cluster-editor appscode/rdsawskubedbcom-cluster-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rdsawskubedbcom-cluster-editor appscode/rdsawskubedbcom-cluster-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Cluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-cl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-cluster-editor appscode/rdsawskubedbcom-cluster-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-cluster-editor appscode/rdsawskubedbcom-cluster-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-cluster-editor appscode/rdsawskubedbcom-cluster-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-cluster-editor appscode/rdsawskubedbcom-cluster-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-clusteractivitystream-editor/Chart.yaml b/charts/rdsawskubedbcom-clusteractivitystream-editor/Chart.yaml index e15a54844e..85b957787d 100644 --- a/charts/rdsawskubedbcom-clusteractivitystream-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-clusteractivitystream-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"clusteractivitystreams"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterActivityStream Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-clusteractivitystream-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rdsawskubedbcom-clusteractivitystream-editor/README.md b/charts/rdsawskubedbcom-clusteractivitystream-editor/README.md index 0a6f0c2bff..c201ea0871 100644 --- a/charts/rdsawskubedbcom-clusteractivitystream-editor/README.md +++ b/charts/rdsawskubedbcom-clusteractivitystream-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-clusteractivitystream-editor --version=v0.38.0 -$ helm upgrade -i rdsawskubedbcom-clusteractivitystream-editor appscode/rdsawskubedbcom-clusteractivitystream-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rdsawskubedbcom-clusteractivitystream-editor --version=v0.39.0 +$ helm upgrade -i rdsawskubedbcom-clusteractivitystream-editor appscode/rdsawskubedbcom-clusteractivitystream-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterActivityStream Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `rdsawskubedbcom-clusteractivitystream-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-clusteractivitystream-editor appscode/rdsawskubedbcom-clusteractivitystream-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rdsawskubedbcom-clusteractivitystream-editor appscode/rdsawskubedbcom-clusteractivitystream-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterActivityStream Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-cl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clusteractivitystream-editor appscode/rdsawskubedbcom-clusteractivitystream-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-clusteractivitystream-editor appscode/rdsawskubedbcom-clusteractivitystream-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clusteractivitystream-editor appscode/rdsawskubedbcom-clusteractivitystream-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-clusteractivitystream-editor appscode/rdsawskubedbcom-clusteractivitystream-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-clusterendpoint-editor/Chart.yaml b/charts/rdsawskubedbcom-clusterendpoint-editor/Chart.yaml index d303854ffd..1449f40f05 100644 --- a/charts/rdsawskubedbcom-clusterendpoint-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-clusterendpoint-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"clusterendpoints"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterEndpoint Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-clusterendpoint-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rdsawskubedbcom-clusterendpoint-editor/README.md b/charts/rdsawskubedbcom-clusterendpoint-editor/README.md index 0d29e2a571..1f1f5728a6 100644 --- a/charts/rdsawskubedbcom-clusterendpoint-editor/README.md +++ b/charts/rdsawskubedbcom-clusterendpoint-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-clusterendpoint-editor --version=v0.38.0 -$ helm upgrade -i rdsawskubedbcom-clusterendpoint-editor appscode/rdsawskubedbcom-clusterendpoint-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rdsawskubedbcom-clusterendpoint-editor --version=v0.39.0 +$ helm upgrade -i rdsawskubedbcom-clusterendpoint-editor appscode/rdsawskubedbcom-clusterendpoint-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterEndpoint Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `rdsawskubedbcom-clusterendpoint-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterendpoint-editor appscode/rdsawskubedbcom-clusterendpoint-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rdsawskubedbcom-clusterendpoint-editor appscode/rdsawskubedbcom-clusterendpoint-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterEndpoint Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-cl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterendpoint-editor appscode/rdsawskubedbcom-clusterendpoint-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-clusterendpoint-editor appscode/rdsawskubedbcom-clusterendpoint-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterendpoint-editor appscode/rdsawskubedbcom-clusterendpoint-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-clusterendpoint-editor appscode/rdsawskubedbcom-clusterendpoint-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-clusterinstance-editor/Chart.yaml b/charts/rdsawskubedbcom-clusterinstance-editor/Chart.yaml index 3794ee737e..caaff47ffa 100644 --- a/charts/rdsawskubedbcom-clusterinstance-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-clusterinstance-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"clusterinstances"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterInstance Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-clusterinstance-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rdsawskubedbcom-clusterinstance-editor/README.md b/charts/rdsawskubedbcom-clusterinstance-editor/README.md index feb747f90e..ee83781d97 100644 --- a/charts/rdsawskubedbcom-clusterinstance-editor/README.md +++ b/charts/rdsawskubedbcom-clusterinstance-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-clusterinstance-editor --version=v0.38.0 -$ helm upgrade -i rdsawskubedbcom-clusterinstance-editor appscode/rdsawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rdsawskubedbcom-clusterinstance-editor --version=v0.39.0 +$ helm upgrade -i rdsawskubedbcom-clusterinstance-editor appscode/rdsawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterInstance Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `rdsawskubedbcom-clusterinstance-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterinstance-editor appscode/rdsawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rdsawskubedbcom-clusterinstance-editor appscode/rdsawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterInstance Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-cl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterinstance-editor appscode/rdsawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-clusterinstance-editor appscode/rdsawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterinstance-editor appscode/rdsawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-clusterinstance-editor appscode/rdsawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-clusterparametergroup-editor/Chart.yaml b/charts/rdsawskubedbcom-clusterparametergroup-editor/Chart.yaml index 1a6bed133e..cff96cebf5 100644 --- a/charts/rdsawskubedbcom-clusterparametergroup-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-clusterparametergroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"clusterparametergroups"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterParameterGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-clusterparametergroup-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rdsawskubedbcom-clusterparametergroup-editor/README.md b/charts/rdsawskubedbcom-clusterparametergroup-editor/README.md index f1826987b1..6946ff9a67 100644 --- a/charts/rdsawskubedbcom-clusterparametergroup-editor/README.md +++ b/charts/rdsawskubedbcom-clusterparametergroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-clusterparametergroup-editor --version=v0.38.0 -$ helm upgrade -i rdsawskubedbcom-clusterparametergroup-editor appscode/rdsawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rdsawskubedbcom-clusterparametergroup-editor --version=v0.39.0 +$ helm upgrade -i rdsawskubedbcom-clusterparametergroup-editor appscode/rdsawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterParameterGroup Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `rdsawskubedbcom-clusterparametergroup-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterparametergroup-editor appscode/rdsawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rdsawskubedbcom-clusterparametergroup-editor appscode/rdsawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterParameterGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-cl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterparametergroup-editor appscode/rdsawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-clusterparametergroup-editor appscode/rdsawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterparametergroup-editor appscode/rdsawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-clusterparametergroup-editor appscode/rdsawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-clusterroleassociation-editor/Chart.yaml b/charts/rdsawskubedbcom-clusterroleassociation-editor/Chart.yaml index 3fbf466faf..2de343333d 100644 --- a/charts/rdsawskubedbcom-clusterroleassociation-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-clusterroleassociation-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"clusterroleassociations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterRoleAssociation Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-clusterroleassociation-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rdsawskubedbcom-clusterroleassociation-editor/README.md b/charts/rdsawskubedbcom-clusterroleassociation-editor/README.md index 60ecc1040f..a4818d747d 100644 --- a/charts/rdsawskubedbcom-clusterroleassociation-editor/README.md +++ b/charts/rdsawskubedbcom-clusterroleassociation-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-clusterroleassociation-editor --version=v0.38.0 -$ helm upgrade -i rdsawskubedbcom-clusterroleassociation-editor appscode/rdsawskubedbcom-clusterroleassociation-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rdsawskubedbcom-clusterroleassociation-editor --version=v0.39.0 +$ helm upgrade -i rdsawskubedbcom-clusterroleassociation-editor appscode/rdsawskubedbcom-clusterroleassociation-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterRoleAssociation Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `rdsawskubedbcom-clusterroleassociation-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterroleassociation-editor appscode/rdsawskubedbcom-clusterroleassociation-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rdsawskubedbcom-clusterroleassociation-editor appscode/rdsawskubedbcom-clusterroleassociation-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterRoleAssociation Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-cl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterroleassociation-editor appscode/rdsawskubedbcom-clusterroleassociation-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-clusterroleassociation-editor appscode/rdsawskubedbcom-clusterroleassociation-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterroleassociation-editor appscode/rdsawskubedbcom-clusterroleassociation-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-clusterroleassociation-editor appscode/rdsawskubedbcom-clusterroleassociation-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-clustersnapshot-editor/Chart.yaml b/charts/rdsawskubedbcom-clustersnapshot-editor/Chart.yaml index 56e8ebcb8b..81e34e42b8 100644 --- a/charts/rdsawskubedbcom-clustersnapshot-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-clustersnapshot-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"clustersnapshots"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterSnapshot Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-clustersnapshot-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rdsawskubedbcom-clustersnapshot-editor/README.md b/charts/rdsawskubedbcom-clustersnapshot-editor/README.md index 30e77d2f66..1d7d0cbfdf 100644 --- a/charts/rdsawskubedbcom-clustersnapshot-editor/README.md +++ b/charts/rdsawskubedbcom-clustersnapshot-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-clustersnapshot-editor --version=v0.38.0 -$ helm upgrade -i rdsawskubedbcom-clustersnapshot-editor appscode/rdsawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rdsawskubedbcom-clustersnapshot-editor --version=v0.39.0 +$ helm upgrade -i rdsawskubedbcom-clustersnapshot-editor appscode/rdsawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterSnapshot Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `rdsawskubedbcom-clustersnapshot-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-clustersnapshot-editor appscode/rdsawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rdsawskubedbcom-clustersnapshot-editor appscode/rdsawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterSnapshot Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-cl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clustersnapshot-editor appscode/rdsawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-clustersnapshot-editor appscode/rdsawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clustersnapshot-editor appscode/rdsawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-clustersnapshot-editor appscode/rdsawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor/Chart.yaml b/charts/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor/Chart.yaml index 45789a6fbf..22c4ec7e1c 100644 --- a/charts/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"dbinstanceautomatedbackupsreplications"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DBInstanceAutomatedBackupsReplication Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor/README.md b/charts/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor/README.md index 4e868f9f82..b99b797a9d 100644 --- a/charts/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor/README.md +++ b/charts/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor --version=v0.38.0 -$ helm upgrade -i rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor appscode/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor --version=v0.39.0 +$ helm upgrade -i rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor appscode/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DBInstanceAutomatedBackupsReplication Editor on a [Kubernet To install/upgrade the chart with the release name `rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor appscode/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor appscode/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DBInstanceAutomatedBackupsReplication Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-db Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor appscode/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor appscode/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor appscode/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor appscode/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-dbsnapshotcopy-editor/Chart.yaml b/charts/rdsawskubedbcom-dbsnapshotcopy-editor/Chart.yaml index 723da7a16d..cb1e60ac26 100644 --- a/charts/rdsawskubedbcom-dbsnapshotcopy-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-dbsnapshotcopy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"dbsnapshotcopies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DBSnapshotCopy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-dbsnapshotcopy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rdsawskubedbcom-dbsnapshotcopy-editor/README.md b/charts/rdsawskubedbcom-dbsnapshotcopy-editor/README.md index e53a0f03cb..5668f3bce6 100644 --- a/charts/rdsawskubedbcom-dbsnapshotcopy-editor/README.md +++ b/charts/rdsawskubedbcom-dbsnapshotcopy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-dbsnapshotcopy-editor --version=v0.38.0 -$ helm upgrade -i rdsawskubedbcom-dbsnapshotcopy-editor appscode/rdsawskubedbcom-dbsnapshotcopy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rdsawskubedbcom-dbsnapshotcopy-editor --version=v0.39.0 +$ helm upgrade -i rdsawskubedbcom-dbsnapshotcopy-editor appscode/rdsawskubedbcom-dbsnapshotcopy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DBSnapshotCopy Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `rdsawskubedbcom-dbsnapshotcopy-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-dbsnapshotcopy-editor appscode/rdsawskubedbcom-dbsnapshotcopy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rdsawskubedbcom-dbsnapshotcopy-editor appscode/rdsawskubedbcom-dbsnapshotcopy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DBSnapshotCopy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-db Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-dbsnapshotcopy-editor appscode/rdsawskubedbcom-dbsnapshotcopy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-dbsnapshotcopy-editor appscode/rdsawskubedbcom-dbsnapshotcopy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-dbsnapshotcopy-editor appscode/rdsawskubedbcom-dbsnapshotcopy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-dbsnapshotcopy-editor appscode/rdsawskubedbcom-dbsnapshotcopy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-eventsubscription-editor/Chart.yaml b/charts/rdsawskubedbcom-eventsubscription-editor/Chart.yaml index 108f8a6b87..91c00e2063 100644 --- a/charts/rdsawskubedbcom-eventsubscription-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-eventsubscription-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"eventsubscriptions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: EventSubscription Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-eventsubscription-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rdsawskubedbcom-eventsubscription-editor/README.md b/charts/rdsawskubedbcom-eventsubscription-editor/README.md index 1a8604e0e2..29afed90d8 100644 --- a/charts/rdsawskubedbcom-eventsubscription-editor/README.md +++ b/charts/rdsawskubedbcom-eventsubscription-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-eventsubscription-editor --version=v0.38.0 -$ helm upgrade -i rdsawskubedbcom-eventsubscription-editor appscode/rdsawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rdsawskubedbcom-eventsubscription-editor --version=v0.39.0 +$ helm upgrade -i rdsawskubedbcom-eventsubscription-editor appscode/rdsawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EventSubscription Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `rdsawskubedbcom-eventsubscription-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-eventsubscription-editor appscode/rdsawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rdsawskubedbcom-eventsubscription-editor appscode/rdsawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a EventSubscription Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-ev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-eventsubscription-editor appscode/rdsawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-eventsubscription-editor appscode/rdsawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-eventsubscription-editor appscode/rdsawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-eventsubscription-editor appscode/rdsawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-globalcluster-editor/Chart.yaml b/charts/rdsawskubedbcom-globalcluster-editor/Chart.yaml index 4d3508f132..22c0fcda69 100644 --- a/charts/rdsawskubedbcom-globalcluster-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-globalcluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"globalclusters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GlobalCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-globalcluster-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rdsawskubedbcom-globalcluster-editor/README.md b/charts/rdsawskubedbcom-globalcluster-editor/README.md index 97f9b7e3a5..a17777ce7d 100644 --- a/charts/rdsawskubedbcom-globalcluster-editor/README.md +++ b/charts/rdsawskubedbcom-globalcluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-globalcluster-editor --version=v0.38.0 -$ helm upgrade -i rdsawskubedbcom-globalcluster-editor appscode/rdsawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rdsawskubedbcom-globalcluster-editor --version=v0.39.0 +$ helm upgrade -i rdsawskubedbcom-globalcluster-editor appscode/rdsawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GlobalCluster Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `rdsawskubedbcom-globalcluster-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-globalcluster-editor appscode/rdsawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rdsawskubedbcom-globalcluster-editor appscode/rdsawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GlobalCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-gl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-globalcluster-editor appscode/rdsawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-globalcluster-editor appscode/rdsawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-globalcluster-editor appscode/rdsawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-globalcluster-editor appscode/rdsawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-instance-editor/Chart.yaml b/charts/rdsawskubedbcom-instance-editor/Chart.yaml index 81a07422fb..128a60dfa3 100644 --- a/charts/rdsawskubedbcom-instance-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-instance-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"instances"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Instance Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-instance-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rdsawskubedbcom-instance-editor/README.md b/charts/rdsawskubedbcom-instance-editor/README.md index 796ff3b9cd..8f1baf9463 100644 --- a/charts/rdsawskubedbcom-instance-editor/README.md +++ b/charts/rdsawskubedbcom-instance-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-instance-editor --version=v0.38.0 -$ helm upgrade -i rdsawskubedbcom-instance-editor appscode/rdsawskubedbcom-instance-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rdsawskubedbcom-instance-editor --version=v0.39.0 +$ helm upgrade -i rdsawskubedbcom-instance-editor appscode/rdsawskubedbcom-instance-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Instance Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `rdsawskubedbcom-instance-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-instance-editor appscode/rdsawskubedbcom-instance-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rdsawskubedbcom-instance-editor appscode/rdsawskubedbcom-instance-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Instance Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-in Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-instance-editor appscode/rdsawskubedbcom-instance-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-instance-editor appscode/rdsawskubedbcom-instance-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-instance-editor appscode/rdsawskubedbcom-instance-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-instance-editor appscode/rdsawskubedbcom-instance-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-instanceroleassociation-editor/Chart.yaml b/charts/rdsawskubedbcom-instanceroleassociation-editor/Chart.yaml index e7a1704771..1e94fe64fe 100644 --- a/charts/rdsawskubedbcom-instanceroleassociation-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-instanceroleassociation-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"instanceroleassociations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: InstanceRoleAssociation Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-instanceroleassociation-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rdsawskubedbcom-instanceroleassociation-editor/README.md b/charts/rdsawskubedbcom-instanceroleassociation-editor/README.md index 1f4a9701e5..cc49df750d 100644 --- a/charts/rdsawskubedbcom-instanceroleassociation-editor/README.md +++ b/charts/rdsawskubedbcom-instanceroleassociation-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-instanceroleassociation-editor --version=v0.38.0 -$ helm upgrade -i rdsawskubedbcom-instanceroleassociation-editor appscode/rdsawskubedbcom-instanceroleassociation-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rdsawskubedbcom-instanceroleassociation-editor --version=v0.39.0 +$ helm upgrade -i rdsawskubedbcom-instanceroleassociation-editor appscode/rdsawskubedbcom-instanceroleassociation-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a InstanceRoleAssociation Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `rdsawskubedbcom-instanceroleassociation-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-instanceroleassociation-editor appscode/rdsawskubedbcom-instanceroleassociation-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rdsawskubedbcom-instanceroleassociation-editor appscode/rdsawskubedbcom-instanceroleassociation-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a InstanceRoleAssociation Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-in Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-instanceroleassociation-editor appscode/rdsawskubedbcom-instanceroleassociation-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-instanceroleassociation-editor appscode/rdsawskubedbcom-instanceroleassociation-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-instanceroleassociation-editor appscode/rdsawskubedbcom-instanceroleassociation-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-instanceroleassociation-editor appscode/rdsawskubedbcom-instanceroleassociation-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-optiongroup-editor/Chart.yaml b/charts/rdsawskubedbcom-optiongroup-editor/Chart.yaml index 6226ca6739..bb6c6fd1c5 100644 --- a/charts/rdsawskubedbcom-optiongroup-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-optiongroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"optiongroups"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: OptionGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-optiongroup-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rdsawskubedbcom-optiongroup-editor/README.md b/charts/rdsawskubedbcom-optiongroup-editor/README.md index 21717be1b4..4683d9ca2f 100644 --- a/charts/rdsawskubedbcom-optiongroup-editor/README.md +++ b/charts/rdsawskubedbcom-optiongroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-optiongroup-editor --version=v0.38.0 -$ helm upgrade -i rdsawskubedbcom-optiongroup-editor appscode/rdsawskubedbcom-optiongroup-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rdsawskubedbcom-optiongroup-editor --version=v0.39.0 +$ helm upgrade -i rdsawskubedbcom-optiongroup-editor appscode/rdsawskubedbcom-optiongroup-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a OptionGroup Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `rdsawskubedbcom-optiongroup-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-optiongroup-editor appscode/rdsawskubedbcom-optiongroup-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rdsawskubedbcom-optiongroup-editor appscode/rdsawskubedbcom-optiongroup-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a OptionGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-op Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-optiongroup-editor appscode/rdsawskubedbcom-optiongroup-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-optiongroup-editor appscode/rdsawskubedbcom-optiongroup-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-optiongroup-editor appscode/rdsawskubedbcom-optiongroup-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-optiongroup-editor appscode/rdsawskubedbcom-optiongroup-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-parametergroup-editor/Chart.yaml b/charts/rdsawskubedbcom-parametergroup-editor/Chart.yaml index e564c27ab1..5903a3d391 100644 --- a/charts/rdsawskubedbcom-parametergroup-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-parametergroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"parametergroups"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ParameterGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-parametergroup-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rdsawskubedbcom-parametergroup-editor/README.md b/charts/rdsawskubedbcom-parametergroup-editor/README.md index c64f9df534..859a89f0f9 100644 --- a/charts/rdsawskubedbcom-parametergroup-editor/README.md +++ b/charts/rdsawskubedbcom-parametergroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-parametergroup-editor --version=v0.38.0 -$ helm upgrade -i rdsawskubedbcom-parametergroup-editor appscode/rdsawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rdsawskubedbcom-parametergroup-editor --version=v0.39.0 +$ helm upgrade -i rdsawskubedbcom-parametergroup-editor appscode/rdsawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ParameterGroup Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `rdsawskubedbcom-parametergroup-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-parametergroup-editor appscode/rdsawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rdsawskubedbcom-parametergroup-editor appscode/rdsawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ParameterGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-pa Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-parametergroup-editor appscode/rdsawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-parametergroup-editor appscode/rdsawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-parametergroup-editor appscode/rdsawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-parametergroup-editor appscode/rdsawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-proxy-editor/Chart.yaml b/charts/rdsawskubedbcom-proxy-editor/Chart.yaml index 7880bfb068..d9d1fe9296 100644 --- a/charts/rdsawskubedbcom-proxy-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-proxy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"proxies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Proxy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-proxy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rdsawskubedbcom-proxy-editor/README.md b/charts/rdsawskubedbcom-proxy-editor/README.md index 784d6bcae5..9ac2b2aad0 100644 --- a/charts/rdsawskubedbcom-proxy-editor/README.md +++ b/charts/rdsawskubedbcom-proxy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-proxy-editor --version=v0.38.0 -$ helm upgrade -i rdsawskubedbcom-proxy-editor appscode/rdsawskubedbcom-proxy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rdsawskubedbcom-proxy-editor --version=v0.39.0 +$ helm upgrade -i rdsawskubedbcom-proxy-editor appscode/rdsawskubedbcom-proxy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Proxy Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `rdsawskubedbcom-proxy-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-proxy-editor appscode/rdsawskubedbcom-proxy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rdsawskubedbcom-proxy-editor appscode/rdsawskubedbcom-proxy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Proxy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-pr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-proxy-editor appscode/rdsawskubedbcom-proxy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-proxy-editor appscode/rdsawskubedbcom-proxy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-proxy-editor appscode/rdsawskubedbcom-proxy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-proxy-editor appscode/rdsawskubedbcom-proxy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-proxydefaulttargetgroup-editor/Chart.yaml b/charts/rdsawskubedbcom-proxydefaulttargetgroup-editor/Chart.yaml index b064dab3c3..d5c21be629 100644 --- a/charts/rdsawskubedbcom-proxydefaulttargetgroup-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-proxydefaulttargetgroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"proxydefaulttargetgroups"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProxyDefaultTargetGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-proxydefaulttargetgroup-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rdsawskubedbcom-proxydefaulttargetgroup-editor/README.md b/charts/rdsawskubedbcom-proxydefaulttargetgroup-editor/README.md index 74218f68e2..c63e224866 100644 --- a/charts/rdsawskubedbcom-proxydefaulttargetgroup-editor/README.md +++ b/charts/rdsawskubedbcom-proxydefaulttargetgroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-proxydefaulttargetgroup-editor --version=v0.38.0 -$ helm upgrade -i rdsawskubedbcom-proxydefaulttargetgroup-editor appscode/rdsawskubedbcom-proxydefaulttargetgroup-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rdsawskubedbcom-proxydefaulttargetgroup-editor --version=v0.39.0 +$ helm upgrade -i rdsawskubedbcom-proxydefaulttargetgroup-editor appscode/rdsawskubedbcom-proxydefaulttargetgroup-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxyDefaultTargetGroup Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `rdsawskubedbcom-proxydefaulttargetgroup-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-proxydefaulttargetgroup-editor appscode/rdsawskubedbcom-proxydefaulttargetgroup-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rdsawskubedbcom-proxydefaulttargetgroup-editor appscode/rdsawskubedbcom-proxydefaulttargetgroup-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProxyDefaultTargetGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-pr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-proxydefaulttargetgroup-editor appscode/rdsawskubedbcom-proxydefaulttargetgroup-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-proxydefaulttargetgroup-editor appscode/rdsawskubedbcom-proxydefaulttargetgroup-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-proxydefaulttargetgroup-editor appscode/rdsawskubedbcom-proxydefaulttargetgroup-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-proxydefaulttargetgroup-editor appscode/rdsawskubedbcom-proxydefaulttargetgroup-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-proxyendpoint-editor/Chart.yaml b/charts/rdsawskubedbcom-proxyendpoint-editor/Chart.yaml index d7ec793ae8..11542e9875 100644 --- a/charts/rdsawskubedbcom-proxyendpoint-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-proxyendpoint-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"proxyendpoints"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProxyEndpoint Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-proxyendpoint-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rdsawskubedbcom-proxyendpoint-editor/README.md b/charts/rdsawskubedbcom-proxyendpoint-editor/README.md index 29c3b0cfec..00b43f8bc0 100644 --- a/charts/rdsawskubedbcom-proxyendpoint-editor/README.md +++ b/charts/rdsawskubedbcom-proxyendpoint-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-proxyendpoint-editor --version=v0.38.0 -$ helm upgrade -i rdsawskubedbcom-proxyendpoint-editor appscode/rdsawskubedbcom-proxyendpoint-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rdsawskubedbcom-proxyendpoint-editor --version=v0.39.0 +$ helm upgrade -i rdsawskubedbcom-proxyendpoint-editor appscode/rdsawskubedbcom-proxyendpoint-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxyEndpoint Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `rdsawskubedbcom-proxyendpoint-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-proxyendpoint-editor appscode/rdsawskubedbcom-proxyendpoint-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rdsawskubedbcom-proxyendpoint-editor appscode/rdsawskubedbcom-proxyendpoint-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProxyEndpoint Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-pr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-proxyendpoint-editor appscode/rdsawskubedbcom-proxyendpoint-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-proxyendpoint-editor appscode/rdsawskubedbcom-proxyendpoint-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-proxyendpoint-editor appscode/rdsawskubedbcom-proxyendpoint-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-proxyendpoint-editor appscode/rdsawskubedbcom-proxyendpoint-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-proxytarget-editor/Chart.yaml b/charts/rdsawskubedbcom-proxytarget-editor/Chart.yaml index f70f6740c3..55477c8dc9 100644 --- a/charts/rdsawskubedbcom-proxytarget-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-proxytarget-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"proxytargets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProxyTarget Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-proxytarget-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rdsawskubedbcom-proxytarget-editor/README.md b/charts/rdsawskubedbcom-proxytarget-editor/README.md index 9ff75d16c1..0b2587bf56 100644 --- a/charts/rdsawskubedbcom-proxytarget-editor/README.md +++ b/charts/rdsawskubedbcom-proxytarget-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-proxytarget-editor --version=v0.38.0 -$ helm upgrade -i rdsawskubedbcom-proxytarget-editor appscode/rdsawskubedbcom-proxytarget-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rdsawskubedbcom-proxytarget-editor --version=v0.39.0 +$ helm upgrade -i rdsawskubedbcom-proxytarget-editor appscode/rdsawskubedbcom-proxytarget-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxyTarget Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `rdsawskubedbcom-proxytarget-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-proxytarget-editor appscode/rdsawskubedbcom-proxytarget-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rdsawskubedbcom-proxytarget-editor appscode/rdsawskubedbcom-proxytarget-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProxyTarget Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-pr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-proxytarget-editor appscode/rdsawskubedbcom-proxytarget-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-proxytarget-editor appscode/rdsawskubedbcom-proxytarget-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-proxytarget-editor appscode/rdsawskubedbcom-proxytarget-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-proxytarget-editor appscode/rdsawskubedbcom-proxytarget-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-snapshot-editor/Chart.yaml b/charts/rdsawskubedbcom-snapshot-editor/Chart.yaml index 3c72c1b4d9..66c5407c25 100644 --- a/charts/rdsawskubedbcom-snapshot-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-snapshot-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"snapshots"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Snapshot Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-snapshot-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rdsawskubedbcom-snapshot-editor/README.md b/charts/rdsawskubedbcom-snapshot-editor/README.md index 398819512c..1cb0dfb5f0 100644 --- a/charts/rdsawskubedbcom-snapshot-editor/README.md +++ b/charts/rdsawskubedbcom-snapshot-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-snapshot-editor --version=v0.38.0 -$ helm upgrade -i rdsawskubedbcom-snapshot-editor appscode/rdsawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rdsawskubedbcom-snapshot-editor --version=v0.39.0 +$ helm upgrade -i rdsawskubedbcom-snapshot-editor appscode/rdsawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Snapshot Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `rdsawskubedbcom-snapshot-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-snapshot-editor appscode/rdsawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rdsawskubedbcom-snapshot-editor appscode/rdsawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Snapshot Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-sn Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-snapshot-editor appscode/rdsawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-snapshot-editor appscode/rdsawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-snapshot-editor appscode/rdsawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-snapshot-editor appscode/rdsawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-subnetgroup-editor/Chart.yaml b/charts/rdsawskubedbcom-subnetgroup-editor/Chart.yaml index 59b098302d..b964659c01 100644 --- a/charts/rdsawskubedbcom-subnetgroup-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-subnetgroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"subnetgroups"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SubnetGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-subnetgroup-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/rdsawskubedbcom-subnetgroup-editor/README.md b/charts/rdsawskubedbcom-subnetgroup-editor/README.md index ae3465aa02..5d89853794 100644 --- a/charts/rdsawskubedbcom-subnetgroup-editor/README.md +++ b/charts/rdsawskubedbcom-subnetgroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-subnetgroup-editor --version=v0.38.0 -$ helm upgrade -i rdsawskubedbcom-subnetgroup-editor appscode/rdsawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/rdsawskubedbcom-subnetgroup-editor --version=v0.39.0 +$ helm upgrade -i rdsawskubedbcom-subnetgroup-editor appscode/rdsawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SubnetGroup Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `rdsawskubedbcom-subnetgroup-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-subnetgroup-editor appscode/rdsawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i rdsawskubedbcom-subnetgroup-editor appscode/rdsawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SubnetGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-su Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-subnetgroup-editor appscode/rdsawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-subnetgroup-editor appscode/rdsawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-subnetgroup-editor appscode/rdsawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-subnetgroup-editor appscode/rdsawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/redisgcpkubedbcom-instance-editor/Chart.yaml b/charts/redisgcpkubedbcom-instance-editor/Chart.yaml index 097099c7db..a9d66f99f1 100644 --- a/charts/redisgcpkubedbcom-instance-editor/Chart.yaml +++ b/charts/redisgcpkubedbcom-instance-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"redis.gcp.kubedb.com","version":"v1alpha1","resource":"instances"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Instance Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: redisgcpkubedbcom-instance-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/redisgcpkubedbcom-instance-editor/README.md b/charts/redisgcpkubedbcom-instance-editor/README.md index 6aacc3bcdd..8904f2dc1b 100644 --- a/charts/redisgcpkubedbcom-instance-editor/README.md +++ b/charts/redisgcpkubedbcom-instance-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/redisgcpkubedbcom-instance-editor --version=v0.38.0 -$ helm upgrade -i redisgcpkubedbcom-instance-editor appscode/redisgcpkubedbcom-instance-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/redisgcpkubedbcom-instance-editor --version=v0.39.0 +$ helm upgrade -i redisgcpkubedbcom-instance-editor appscode/redisgcpkubedbcom-instance-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Instance Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `redisgcpkubedbcom-instance-editor`: ```bash -$ helm upgrade -i redisgcpkubedbcom-instance-editor appscode/redisgcpkubedbcom-instance-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i redisgcpkubedbcom-instance-editor appscode/redisgcpkubedbcom-instance-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Instance Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `redisgcpkubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i redisgcpkubedbcom-instance-editor appscode/redisgcpkubedbcom-instance-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=redis.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i redisgcpkubedbcom-instance-editor appscode/redisgcpkubedbcom-instance-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=redis.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i redisgcpkubedbcom-instance-editor appscode/redisgcpkubedbcom-instance-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i redisgcpkubedbcom-instance-editor appscode/redisgcpkubedbcom-instance-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/releasesxhelmdev-bundle-editor/Chart.yaml b/charts/releasesxhelmdev-bundle-editor/Chart.yaml index ed3aa6322b..cd17e03630 100644 --- a/charts/releasesxhelmdev-bundle-editor/Chart.yaml +++ b/charts/releasesxhelmdev-bundle-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"releases.x-helm.dev","version":"v1alpha1","resource":"bundles"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Bundle Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: releasesxhelmdev-bundle-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/releasesxhelmdev-bundle-editor/README.md b/charts/releasesxhelmdev-bundle-editor/README.md index 0c5175da89..1da7e40232 100644 --- a/charts/releasesxhelmdev-bundle-editor/README.md +++ b/charts/releasesxhelmdev-bundle-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/releasesxhelmdev-bundle-editor --version=v0.38.0 -$ helm upgrade -i releasesxhelmdev-bundle-editor appscode/releasesxhelmdev-bundle-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/releasesxhelmdev-bundle-editor --version=v0.39.0 +$ helm upgrade -i releasesxhelmdev-bundle-editor appscode/releasesxhelmdev-bundle-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Bundle Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `releasesxhelmdev-bundle-editor`: ```bash -$ helm upgrade -i releasesxhelmdev-bundle-editor appscode/releasesxhelmdev-bundle-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i releasesxhelmdev-bundle-editor appscode/releasesxhelmdev-bundle-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Bundle Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `releasesxhelmdev-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i releasesxhelmdev-bundle-editor appscode/releasesxhelmdev-bundle-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=releases.x-helm.dev/v1alpha1 +$ helm upgrade -i releasesxhelmdev-bundle-editor appscode/releasesxhelmdev-bundle-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=releases.x-helm.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i releasesxhelmdev-bundle-editor appscode/releasesxhelmdev-bundle-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i releasesxhelmdev-bundle-editor appscode/releasesxhelmdev-bundle-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/releasesxhelmdev-order-editor/Chart.yaml b/charts/releasesxhelmdev-order-editor/Chart.yaml index aec39d4737..3455578b15 100644 --- a/charts/releasesxhelmdev-order-editor/Chart.yaml +++ b/charts/releasesxhelmdev-order-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"releases.x-helm.dev","version":"v1alpha1","resource":"orders"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Order Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: releasesxhelmdev-order-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/releasesxhelmdev-order-editor/README.md b/charts/releasesxhelmdev-order-editor/README.md index 54670bb2da..0a23d3f108 100644 --- a/charts/releasesxhelmdev-order-editor/README.md +++ b/charts/releasesxhelmdev-order-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/releasesxhelmdev-order-editor --version=v0.38.0 -$ helm upgrade -i releasesxhelmdev-order-editor appscode/releasesxhelmdev-order-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/releasesxhelmdev-order-editor --version=v0.39.0 +$ helm upgrade -i releasesxhelmdev-order-editor appscode/releasesxhelmdev-order-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Order Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `releasesxhelmdev-order-editor`: ```bash -$ helm upgrade -i releasesxhelmdev-order-editor appscode/releasesxhelmdev-order-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i releasesxhelmdev-order-editor appscode/releasesxhelmdev-order-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Order Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `releasesxhelmdev-o Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i releasesxhelmdev-order-editor appscode/releasesxhelmdev-order-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=releases.x-helm.dev/v1alpha1 +$ helm upgrade -i releasesxhelmdev-order-editor appscode/releasesxhelmdev-order-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=releases.x-helm.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i releasesxhelmdev-order-editor appscode/releasesxhelmdev-order-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i releasesxhelmdev-order-editor appscode/releasesxhelmdev-order-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/repositoriesstashappscodecom-snapshot-editor/Chart.yaml b/charts/repositoriesstashappscodecom-snapshot-editor/Chart.yaml index 144bae419c..b3c2a74688 100644 --- a/charts/repositoriesstashappscodecom-snapshot-editor/Chart.yaml +++ b/charts/repositoriesstashappscodecom-snapshot-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"repositories.stash.appscode.com","version":"v1alpha1","resource":"snapshots"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Snapshot Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: repositoriesstashappscodecom-snapshot-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/repositoriesstashappscodecom-snapshot-editor/README.md b/charts/repositoriesstashappscodecom-snapshot-editor/README.md index b5118e69cb..dfc8cc1d25 100644 --- a/charts/repositoriesstashappscodecom-snapshot-editor/README.md +++ b/charts/repositoriesstashappscodecom-snapshot-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/repositoriesstashappscodecom-snapshot-editor --version=v0.38.0 -$ helm upgrade -i repositoriesstashappscodecom-snapshot-editor appscode/repositoriesstashappscodecom-snapshot-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/repositoriesstashappscodecom-snapshot-editor --version=v0.39.0 +$ helm upgrade -i repositoriesstashappscodecom-snapshot-editor appscode/repositoriesstashappscodecom-snapshot-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Snapshot Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `repositoriesstashappscodecom-snapshot-editor`: ```bash -$ helm upgrade -i repositoriesstashappscodecom-snapshot-editor appscode/repositoriesstashappscodecom-snapshot-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i repositoriesstashappscodecom-snapshot-editor appscode/repositoriesstashappscodecom-snapshot-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Snapshot Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `repositoriesstasha Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i repositoriesstashappscodecom-snapshot-editor appscode/repositoriesstashappscodecom-snapshot-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=repositories.stash.appscode.com/v1alpha1 +$ helm upgrade -i repositoriesstashappscodecom-snapshot-editor appscode/repositoriesstashappscodecom-snapshot-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=repositories.stash.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i repositoriesstashappscodecom-snapshot-editor appscode/repositoriesstashappscodecom-snapshot-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i repositoriesstashappscodecom-snapshot-editor appscode/repositoriesstashappscodecom-snapshot-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/runtimeclusterxk8sio-extensionconfig-editor/Chart.yaml b/charts/runtimeclusterxk8sio-extensionconfig-editor/Chart.yaml index 33780f90d1..fe2a144648 100644 --- a/charts/runtimeclusterxk8sio-extensionconfig-editor/Chart.yaml +++ b/charts/runtimeclusterxk8sio-extensionconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"runtime.cluster.x-k8s.io","version":"v1alpha1","resource":"extensionconfigs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ExtensionConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: runtimeclusterxk8sio-extensionconfig-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/runtimeclusterxk8sio-extensionconfig-editor/README.md b/charts/runtimeclusterxk8sio-extensionconfig-editor/README.md index 5277b80373..814183ec82 100644 --- a/charts/runtimeclusterxk8sio-extensionconfig-editor/README.md +++ b/charts/runtimeclusterxk8sio-extensionconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/runtimeclusterxk8sio-extensionconfig-editor --version=v0.38.0 -$ helm upgrade -i runtimeclusterxk8sio-extensionconfig-editor appscode/runtimeclusterxk8sio-extensionconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/runtimeclusterxk8sio-extensionconfig-editor --version=v0.39.0 +$ helm upgrade -i runtimeclusterxk8sio-extensionconfig-editor appscode/runtimeclusterxk8sio-extensionconfig-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ExtensionConfig Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `runtimeclusterxk8sio-extensionconfig-editor`: ```bash -$ helm upgrade -i runtimeclusterxk8sio-extensionconfig-editor appscode/runtimeclusterxk8sio-extensionconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i runtimeclusterxk8sio-extensionconfig-editor appscode/runtimeclusterxk8sio-extensionconfig-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ExtensionConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `runtimeclusterxk8s Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i runtimeclusterxk8sio-extensionconfig-editor appscode/runtimeclusterxk8sio-extensionconfig-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=runtime.cluster.x-k8s.io/v1alpha1 +$ helm upgrade -i runtimeclusterxk8sio-extensionconfig-editor appscode/runtimeclusterxk8sio-extensionconfig-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=runtime.cluster.x-k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i runtimeclusterxk8sio-extensionconfig-editor appscode/runtimeclusterxk8sio-extensionconfig-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i runtimeclusterxk8sio-extensionconfig-editor appscode/runtimeclusterxk8sio-extensionconfig-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/schedulingk8sio-priorityclass-editor/Chart.yaml b/charts/schedulingk8sio-priorityclass-editor/Chart.yaml index cf176cb0b3..aa2b68bfb8 100644 --- a/charts/schedulingk8sio-priorityclass-editor/Chart.yaml +++ b/charts/schedulingk8sio-priorityclass-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"scheduling.k8s.io","version":"v1","resource":"priorityclasses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PriorityClass Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: schedulingk8sio-priorityclass-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/schedulingk8sio-priorityclass-editor/README.md b/charts/schedulingk8sio-priorityclass-editor/README.md index 1ffb520715..99faf9fcc6 100644 --- a/charts/schedulingk8sio-priorityclass-editor/README.md +++ b/charts/schedulingk8sio-priorityclass-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/schedulingk8sio-priorityclass-editor --version=v0.38.0 -$ helm upgrade -i schedulingk8sio-priorityclass-editor appscode/schedulingk8sio-priorityclass-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/schedulingk8sio-priorityclass-editor --version=v0.39.0 +$ helm upgrade -i schedulingk8sio-priorityclass-editor appscode/schedulingk8sio-priorityclass-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PriorityClass Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `schedulingk8sio-priorityclass-editor`: ```bash -$ helm upgrade -i schedulingk8sio-priorityclass-editor appscode/schedulingk8sio-priorityclass-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i schedulingk8sio-priorityclass-editor appscode/schedulingk8sio-priorityclass-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PriorityClass Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `schedulingk8sio-pr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i schedulingk8sio-priorityclass-editor appscode/schedulingk8sio-priorityclass-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=scheduling.k8s.io/v1 +$ helm upgrade -i schedulingk8sio-priorityclass-editor appscode/schedulingk8sio-priorityclass-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=scheduling.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i schedulingk8sio-priorityclass-editor appscode/schedulingk8sio-priorityclass-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i schedulingk8sio-priorityclass-editor appscode/schedulingk8sio-priorityclass-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/schemakubedbcom-mariadbdatabase-editor/Chart.yaml b/charts/schemakubedbcom-mariadbdatabase-editor/Chart.yaml index 9b74d7e537..04db5e1d22 100644 --- a/charts/schemakubedbcom-mariadbdatabase-editor/Chart.yaml +++ b/charts/schemakubedbcom-mariadbdatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"schema.kubedb.com","version":"v1alpha1","resource":"mariadbdatabases"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MariaDBDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: schemakubedbcom-mariadbdatabase-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/schemakubedbcom-mariadbdatabase-editor/README.md b/charts/schemakubedbcom-mariadbdatabase-editor/README.md index a75c9f797b..51388cebeb 100644 --- a/charts/schemakubedbcom-mariadbdatabase-editor/README.md +++ b/charts/schemakubedbcom-mariadbdatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/schemakubedbcom-mariadbdatabase-editor --version=v0.38.0 -$ helm upgrade -i schemakubedbcom-mariadbdatabase-editor appscode/schemakubedbcom-mariadbdatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/schemakubedbcom-mariadbdatabase-editor --version=v0.39.0 +$ helm upgrade -i schemakubedbcom-mariadbdatabase-editor appscode/schemakubedbcom-mariadbdatabase-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBDatabase Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `schemakubedbcom-mariadbdatabase-editor`: ```bash -$ helm upgrade -i schemakubedbcom-mariadbdatabase-editor appscode/schemakubedbcom-mariadbdatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i schemakubedbcom-mariadbdatabase-editor appscode/schemakubedbcom-mariadbdatabase-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MariaDBDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `schemakubedbcom-ma Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i schemakubedbcom-mariadbdatabase-editor appscode/schemakubedbcom-mariadbdatabase-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=schema.kubedb.com/v1alpha1 +$ helm upgrade -i schemakubedbcom-mariadbdatabase-editor appscode/schemakubedbcom-mariadbdatabase-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=schema.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i schemakubedbcom-mariadbdatabase-editor appscode/schemakubedbcom-mariadbdatabase-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i schemakubedbcom-mariadbdatabase-editor appscode/schemakubedbcom-mariadbdatabase-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/schemakubedbcom-mongodbdatabase-editor/Chart.yaml b/charts/schemakubedbcom-mongodbdatabase-editor/Chart.yaml index 123c92cad9..1653d881b4 100644 --- a/charts/schemakubedbcom-mongodbdatabase-editor/Chart.yaml +++ b/charts/schemakubedbcom-mongodbdatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"schema.kubedb.com","version":"v1alpha1","resource":"mongodbdatabases"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MongoDBDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: schemakubedbcom-mongodbdatabase-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/schemakubedbcom-mongodbdatabase-editor/README.md b/charts/schemakubedbcom-mongodbdatabase-editor/README.md index 22fd1b31ab..0869e8b947 100644 --- a/charts/schemakubedbcom-mongodbdatabase-editor/README.md +++ b/charts/schemakubedbcom-mongodbdatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/schemakubedbcom-mongodbdatabase-editor --version=v0.38.0 -$ helm upgrade -i schemakubedbcom-mongodbdatabase-editor appscode/schemakubedbcom-mongodbdatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/schemakubedbcom-mongodbdatabase-editor --version=v0.39.0 +$ helm upgrade -i schemakubedbcom-mongodbdatabase-editor appscode/schemakubedbcom-mongodbdatabase-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBDatabase Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `schemakubedbcom-mongodbdatabase-editor`: ```bash -$ helm upgrade -i schemakubedbcom-mongodbdatabase-editor appscode/schemakubedbcom-mongodbdatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i schemakubedbcom-mongodbdatabase-editor appscode/schemakubedbcom-mongodbdatabase-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MongoDBDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `schemakubedbcom-mo Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i schemakubedbcom-mongodbdatabase-editor appscode/schemakubedbcom-mongodbdatabase-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=schema.kubedb.com/v1alpha1 +$ helm upgrade -i schemakubedbcom-mongodbdatabase-editor appscode/schemakubedbcom-mongodbdatabase-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=schema.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i schemakubedbcom-mongodbdatabase-editor appscode/schemakubedbcom-mongodbdatabase-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i schemakubedbcom-mongodbdatabase-editor appscode/schemakubedbcom-mongodbdatabase-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/schemakubedbcom-mysqldatabase-editor/Chart.yaml b/charts/schemakubedbcom-mysqldatabase-editor/Chart.yaml index b528221039..a90f609d18 100644 --- a/charts/schemakubedbcom-mysqldatabase-editor/Chart.yaml +++ b/charts/schemakubedbcom-mysqldatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"schema.kubedb.com","version":"v1alpha1","resource":"mysqldatabases"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MySQLDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: schemakubedbcom-mysqldatabase-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/schemakubedbcom-mysqldatabase-editor/README.md b/charts/schemakubedbcom-mysqldatabase-editor/README.md index 54cc7b29f1..a01a133086 100644 --- a/charts/schemakubedbcom-mysqldatabase-editor/README.md +++ b/charts/schemakubedbcom-mysqldatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/schemakubedbcom-mysqldatabase-editor --version=v0.38.0 -$ helm upgrade -i schemakubedbcom-mysqldatabase-editor appscode/schemakubedbcom-mysqldatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/schemakubedbcom-mysqldatabase-editor --version=v0.39.0 +$ helm upgrade -i schemakubedbcom-mysqldatabase-editor appscode/schemakubedbcom-mysqldatabase-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLDatabase Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `schemakubedbcom-mysqldatabase-editor`: ```bash -$ helm upgrade -i schemakubedbcom-mysqldatabase-editor appscode/schemakubedbcom-mysqldatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i schemakubedbcom-mysqldatabase-editor appscode/schemakubedbcom-mysqldatabase-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MySQLDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `schemakubedbcom-my Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i schemakubedbcom-mysqldatabase-editor appscode/schemakubedbcom-mysqldatabase-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=schema.kubedb.com/v1alpha1 +$ helm upgrade -i schemakubedbcom-mysqldatabase-editor appscode/schemakubedbcom-mysqldatabase-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=schema.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i schemakubedbcom-mysqldatabase-editor appscode/schemakubedbcom-mysqldatabase-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i schemakubedbcom-mysqldatabase-editor appscode/schemakubedbcom-mysqldatabase-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/schemakubedbcom-postgresdatabase-editor/Chart.yaml b/charts/schemakubedbcom-postgresdatabase-editor/Chart.yaml index fd78090715..40a22ab44e 100644 --- a/charts/schemakubedbcom-postgresdatabase-editor/Chart.yaml +++ b/charts/schemakubedbcom-postgresdatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"schema.kubedb.com","version":"v1alpha1","resource":"postgresdatabases"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PostgresDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: schemakubedbcom-postgresdatabase-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/schemakubedbcom-postgresdatabase-editor/README.md b/charts/schemakubedbcom-postgresdatabase-editor/README.md index f2776d22db..170886e23a 100644 --- a/charts/schemakubedbcom-postgresdatabase-editor/README.md +++ b/charts/schemakubedbcom-postgresdatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/schemakubedbcom-postgresdatabase-editor --version=v0.38.0 -$ helm upgrade -i schemakubedbcom-postgresdatabase-editor appscode/schemakubedbcom-postgresdatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/schemakubedbcom-postgresdatabase-editor --version=v0.39.0 +$ helm upgrade -i schemakubedbcom-postgresdatabase-editor appscode/schemakubedbcom-postgresdatabase-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresDatabase Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `schemakubedbcom-postgresdatabase-editor`: ```bash -$ helm upgrade -i schemakubedbcom-postgresdatabase-editor appscode/schemakubedbcom-postgresdatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i schemakubedbcom-postgresdatabase-editor appscode/schemakubedbcom-postgresdatabase-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PostgresDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `schemakubedbcom-po Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i schemakubedbcom-postgresdatabase-editor appscode/schemakubedbcom-postgresdatabase-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=schema.kubedb.com/v1alpha1 +$ helm upgrade -i schemakubedbcom-postgresdatabase-editor appscode/schemakubedbcom-postgresdatabase-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=schema.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i schemakubedbcom-postgresdatabase-editor appscode/schemakubedbcom-postgresdatabase-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i schemakubedbcom-postgresdatabase-editor appscode/schemakubedbcom-postgresdatabase-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/secretscrossplaneio-storeconfig-editor/Chart.yaml b/charts/secretscrossplaneio-storeconfig-editor/Chart.yaml index a295e5711f..93ce27e79a 100644 --- a/charts/secretscrossplaneio-storeconfig-editor/Chart.yaml +++ b/charts/secretscrossplaneio-storeconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"secrets.crossplane.io","version":"v1alpha1","resource":"storeconfigs"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: StoreConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: secretscrossplaneio-storeconfig-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/secretscrossplaneio-storeconfig-editor/README.md b/charts/secretscrossplaneio-storeconfig-editor/README.md index d302d610b7..89dd7da18f 100644 --- a/charts/secretscrossplaneio-storeconfig-editor/README.md +++ b/charts/secretscrossplaneio-storeconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/secretscrossplaneio-storeconfig-editor --version=v0.38.0 -$ helm upgrade -i secretscrossplaneio-storeconfig-editor appscode/secretscrossplaneio-storeconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/secretscrossplaneio-storeconfig-editor --version=v0.39.0 +$ helm upgrade -i secretscrossplaneio-storeconfig-editor appscode/secretscrossplaneio-storeconfig-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a StoreConfig Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `secretscrossplaneio-storeconfig-editor`: ```bash -$ helm upgrade -i secretscrossplaneio-storeconfig-editor appscode/secretscrossplaneio-storeconfig-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i secretscrossplaneio-storeconfig-editor appscode/secretscrossplaneio-storeconfig-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a StoreConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `secretscrossplanei Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i secretscrossplaneio-storeconfig-editor appscode/secretscrossplaneio-storeconfig-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=secrets.crossplane.io/v1alpha1 +$ helm upgrade -i secretscrossplaneio-storeconfig-editor appscode/secretscrossplaneio-storeconfig-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=secrets.crossplane.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i secretscrossplaneio-storeconfig-editor appscode/secretscrossplaneio-storeconfig-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i secretscrossplaneio-storeconfig-editor appscode/secretscrossplaneio-storeconfig-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/secretsmanagerawskubedbcom-secret-editor/Chart.yaml b/charts/secretsmanagerawskubedbcom-secret-editor/Chart.yaml index df0ed9210e..d6bb218565 100644 --- a/charts/secretsmanagerawskubedbcom-secret-editor/Chart.yaml +++ b/charts/secretsmanagerawskubedbcom-secret-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"secretsmanager.aws.kubedb.com","version":"v1alpha1","resource":"secrets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Secret Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: secretsmanagerawskubedbcom-secret-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/secretsmanagerawskubedbcom-secret-editor/README.md b/charts/secretsmanagerawskubedbcom-secret-editor/README.md index ecbc33f4cc..73611a4f25 100644 --- a/charts/secretsmanagerawskubedbcom-secret-editor/README.md +++ b/charts/secretsmanagerawskubedbcom-secret-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/secretsmanagerawskubedbcom-secret-editor --version=v0.38.0 -$ helm upgrade -i secretsmanagerawskubedbcom-secret-editor appscode/secretsmanagerawskubedbcom-secret-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/secretsmanagerawskubedbcom-secret-editor --version=v0.39.0 +$ helm upgrade -i secretsmanagerawskubedbcom-secret-editor appscode/secretsmanagerawskubedbcom-secret-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Secret Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `secretsmanagerawskubedbcom-secret-editor`: ```bash -$ helm upgrade -i secretsmanagerawskubedbcom-secret-editor appscode/secretsmanagerawskubedbcom-secret-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i secretsmanagerawskubedbcom-secret-editor appscode/secretsmanagerawskubedbcom-secret-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Secret Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `secretsmanagerawsk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i secretsmanagerawskubedbcom-secret-editor appscode/secretsmanagerawskubedbcom-secret-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=secretsmanager.aws.kubedb.com/v1alpha1 +$ helm upgrade -i secretsmanagerawskubedbcom-secret-editor appscode/secretsmanagerawskubedbcom-secret-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=secretsmanager.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i secretsmanagerawskubedbcom-secret-editor appscode/secretsmanagerawskubedbcom-secret-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i secretsmanagerawskubedbcom-secret-editor appscode/secretsmanagerawskubedbcom-secret-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/secretsstorecsixk8sio-secretproviderclass-editor/Chart.yaml b/charts/secretsstorecsixk8sio-secretproviderclass-editor/Chart.yaml index 663be2d59d..811e8675fb 100644 --- a/charts/secretsstorecsixk8sio-secretproviderclass-editor/Chart.yaml +++ b/charts/secretsstorecsixk8sio-secretproviderclass-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"secrets-store.csi.x-k8s.io","version":"v1","resource":"secretproviderclasses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SecretProviderClass Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: secretsstorecsixk8sio-secretproviderclass-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/secretsstorecsixk8sio-secretproviderclass-editor/README.md b/charts/secretsstorecsixk8sio-secretproviderclass-editor/README.md index 96a984772e..149be00cf8 100644 --- a/charts/secretsstorecsixk8sio-secretproviderclass-editor/README.md +++ b/charts/secretsstorecsixk8sio-secretproviderclass-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/secretsstorecsixk8sio-secretproviderclass-editor --version=v0.38.0 -$ helm upgrade -i secretsstorecsixk8sio-secretproviderclass-editor appscode/secretsstorecsixk8sio-secretproviderclass-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/secretsstorecsixk8sio-secretproviderclass-editor --version=v0.39.0 +$ helm upgrade -i secretsstorecsixk8sio-secretproviderclass-editor appscode/secretsstorecsixk8sio-secretproviderclass-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecretProviderClass Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `secretsstorecsixk8sio-secretproviderclass-editor`: ```bash -$ helm upgrade -i secretsstorecsixk8sio-secretproviderclass-editor appscode/secretsstorecsixk8sio-secretproviderclass-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i secretsstorecsixk8sio-secretproviderclass-editor appscode/secretsstorecsixk8sio-secretproviderclass-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SecretProviderClass Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `secretsstorecsixk8 Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i secretsstorecsixk8sio-secretproviderclass-editor appscode/secretsstorecsixk8sio-secretproviderclass-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=secrets-store.csi.x-k8s.io/v1 +$ helm upgrade -i secretsstorecsixk8sio-secretproviderclass-editor appscode/secretsstorecsixk8sio-secretproviderclass-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=secrets-store.csi.x-k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i secretsstorecsixk8sio-secretproviderclass-editor appscode/secretsstorecsixk8sio-secretproviderclass-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i secretsstorecsixk8sio-secretproviderclass-editor appscode/secretsstorecsixk8sio-secretproviderclass-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/secretsstorecsixk8sio-secretproviderclasspodstatus-editor/Chart.yaml b/charts/secretsstorecsixk8sio-secretproviderclasspodstatus-editor/Chart.yaml index 520d4c8046..b09ef0fc6f 100644 --- a/charts/secretsstorecsixk8sio-secretproviderclasspodstatus-editor/Chart.yaml +++ b/charts/secretsstorecsixk8sio-secretproviderclasspodstatus-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"secrets-store.csi.x-k8s.io","version":"v1","resource":"secretproviderclasspodstatuses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SecretProviderClassPodStatus Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: secretsstorecsixk8sio-secretproviderclasspodstatus-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/secretsstorecsixk8sio-secretproviderclasspodstatus-editor/README.md b/charts/secretsstorecsixk8sio-secretproviderclasspodstatus-editor/README.md index 6e6fbaaf1a..4775cbbb5d 100644 --- a/charts/secretsstorecsixk8sio-secretproviderclasspodstatus-editor/README.md +++ b/charts/secretsstorecsixk8sio-secretproviderclasspodstatus-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/secretsstorecsixk8sio-secretproviderclasspodstatus-editor --version=v0.38.0 -$ helm upgrade -i secretsstorecsixk8sio-secretproviderclasspodstatus-editor appscode/secretsstorecsixk8sio-secretproviderclasspodstatus-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/secretsstorecsixk8sio-secretproviderclasspodstatus-editor --version=v0.39.0 +$ helm upgrade -i secretsstorecsixk8sio-secretproviderclasspodstatus-editor appscode/secretsstorecsixk8sio-secretproviderclasspodstatus-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecretProviderClassPodStatus Editor on a [Kubernetes](http: To install/upgrade the chart with the release name `secretsstorecsixk8sio-secretproviderclasspodstatus-editor`: ```bash -$ helm upgrade -i secretsstorecsixk8sio-secretproviderclasspodstatus-editor appscode/secretsstorecsixk8sio-secretproviderclasspodstatus-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i secretsstorecsixk8sio-secretproviderclasspodstatus-editor appscode/secretsstorecsixk8sio-secretproviderclasspodstatus-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SecretProviderClassPodStatus Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `secretsstorecsixk8 Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i secretsstorecsixk8sio-secretproviderclasspodstatus-editor appscode/secretsstorecsixk8sio-secretproviderclasspodstatus-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=secrets-store.csi.x-k8s.io/v1 +$ helm upgrade -i secretsstorecsixk8sio-secretproviderclasspodstatus-editor appscode/secretsstorecsixk8sio-secretproviderclasspodstatus-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=secrets-store.csi.x-k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i secretsstorecsixk8sio-secretproviderclasspodstatus-editor appscode/secretsstorecsixk8sio-secretproviderclasspodstatus-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i secretsstorecsixk8sio-secretproviderclasspodstatus-editor appscode/secretsstorecsixk8sio-secretproviderclasspodstatus-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/settingsk8sio-podpreset-editor/Chart.yaml b/charts/settingsk8sio-podpreset-editor/Chart.yaml index 9c3a708b7d..2bdddb14a3 100644 --- a/charts/settingsk8sio-podpreset-editor/Chart.yaml +++ b/charts/settingsk8sio-podpreset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"settings.k8s.io","version":"v1alpha1","resource":"podpresets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PodPreset Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: settingsk8sio-podpreset-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/settingsk8sio-podpreset-editor/README.md b/charts/settingsk8sio-podpreset-editor/README.md index d1e6bc9e6b..5b5bf4caba 100644 --- a/charts/settingsk8sio-podpreset-editor/README.md +++ b/charts/settingsk8sio-podpreset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/settingsk8sio-podpreset-editor --version=v0.38.0 -$ helm upgrade -i settingsk8sio-podpreset-editor appscode/settingsk8sio-podpreset-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/settingsk8sio-podpreset-editor --version=v0.39.0 +$ helm upgrade -i settingsk8sio-podpreset-editor appscode/settingsk8sio-podpreset-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PodPreset Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `settingsk8sio-podpreset-editor`: ```bash -$ helm upgrade -i settingsk8sio-podpreset-editor appscode/settingsk8sio-podpreset-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i settingsk8sio-podpreset-editor appscode/settingsk8sio-podpreset-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PodPreset Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `settingsk8sio-podp Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i settingsk8sio-podpreset-editor appscode/settingsk8sio-podpreset-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=settings.k8s.io/v1alpha1 +$ helm upgrade -i settingsk8sio-podpreset-editor appscode/settingsk8sio-podpreset-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=settings.k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i settingsk8sio-podpreset-editor appscode/settingsk8sio-podpreset-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i settingsk8sio-podpreset-editor appscode/settingsk8sio-podpreset-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/snapshotstoragek8sio-volumesnapshot-editor/Chart.yaml b/charts/snapshotstoragek8sio-volumesnapshot-editor/Chart.yaml index 88cee28d62..30d1c4b625 100644 --- a/charts/snapshotstoragek8sio-volumesnapshot-editor/Chart.yaml +++ b/charts/snapshotstoragek8sio-volumesnapshot-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"snapshot.storage.k8s.io","version":"v1","resource":"volumesnapshots"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: VolumeSnapshot Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: snapshotstoragek8sio-volumesnapshot-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/snapshotstoragek8sio-volumesnapshot-editor/README.md b/charts/snapshotstoragek8sio-volumesnapshot-editor/README.md index 172f11cbd1..ac812e82ad 100644 --- a/charts/snapshotstoragek8sio-volumesnapshot-editor/README.md +++ b/charts/snapshotstoragek8sio-volumesnapshot-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/snapshotstoragek8sio-volumesnapshot-editor --version=v0.38.0 -$ helm upgrade -i snapshotstoragek8sio-volumesnapshot-editor appscode/snapshotstoragek8sio-volumesnapshot-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/snapshotstoragek8sio-volumesnapshot-editor --version=v0.39.0 +$ helm upgrade -i snapshotstoragek8sio-volumesnapshot-editor appscode/snapshotstoragek8sio-volumesnapshot-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VolumeSnapshot Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `snapshotstoragek8sio-volumesnapshot-editor`: ```bash -$ helm upgrade -i snapshotstoragek8sio-volumesnapshot-editor appscode/snapshotstoragek8sio-volumesnapshot-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i snapshotstoragek8sio-volumesnapshot-editor appscode/snapshotstoragek8sio-volumesnapshot-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a VolumeSnapshot Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `snapshotstoragek8s Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i snapshotstoragek8sio-volumesnapshot-editor appscode/snapshotstoragek8sio-volumesnapshot-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=snapshot.storage.k8s.io/v1 +$ helm upgrade -i snapshotstoragek8sio-volumesnapshot-editor appscode/snapshotstoragek8sio-volumesnapshot-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=snapshot.storage.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i snapshotstoragek8sio-volumesnapshot-editor appscode/snapshotstoragek8sio-volumesnapshot-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i snapshotstoragek8sio-volumesnapshot-editor appscode/snapshotstoragek8sio-volumesnapshot-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/snapshotstoragek8sio-volumesnapshotclass-editor/Chart.yaml b/charts/snapshotstoragek8sio-volumesnapshotclass-editor/Chart.yaml index 3058562ec8..641bfafb63 100644 --- a/charts/snapshotstoragek8sio-volumesnapshotclass-editor/Chart.yaml +++ b/charts/snapshotstoragek8sio-volumesnapshotclass-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"snapshot.storage.k8s.io","version":"v1","resource":"volumesnapshotclasses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: VolumeSnapshotClass Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: snapshotstoragek8sio-volumesnapshotclass-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/snapshotstoragek8sio-volumesnapshotclass-editor/README.md b/charts/snapshotstoragek8sio-volumesnapshotclass-editor/README.md index 2707387bb0..1c2d8a48f4 100644 --- a/charts/snapshotstoragek8sio-volumesnapshotclass-editor/README.md +++ b/charts/snapshotstoragek8sio-volumesnapshotclass-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/snapshotstoragek8sio-volumesnapshotclass-editor --version=v0.38.0 -$ helm upgrade -i snapshotstoragek8sio-volumesnapshotclass-editor appscode/snapshotstoragek8sio-volumesnapshotclass-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/snapshotstoragek8sio-volumesnapshotclass-editor --version=v0.39.0 +$ helm upgrade -i snapshotstoragek8sio-volumesnapshotclass-editor appscode/snapshotstoragek8sio-volumesnapshotclass-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VolumeSnapshotClass Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `snapshotstoragek8sio-volumesnapshotclass-editor`: ```bash -$ helm upgrade -i snapshotstoragek8sio-volumesnapshotclass-editor appscode/snapshotstoragek8sio-volumesnapshotclass-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i snapshotstoragek8sio-volumesnapshotclass-editor appscode/snapshotstoragek8sio-volumesnapshotclass-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a VolumeSnapshotClass Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `snapshotstoragek8s Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i snapshotstoragek8sio-volumesnapshotclass-editor appscode/snapshotstoragek8sio-volumesnapshotclass-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=snapshot.storage.k8s.io/v1 +$ helm upgrade -i snapshotstoragek8sio-volumesnapshotclass-editor appscode/snapshotstoragek8sio-volumesnapshotclass-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=snapshot.storage.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i snapshotstoragek8sio-volumesnapshotclass-editor appscode/snapshotstoragek8sio-volumesnapshotclass-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i snapshotstoragek8sio-volumesnapshotclass-editor appscode/snapshotstoragek8sio-volumesnapshotclass-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/snapshotstoragek8sio-volumesnapshotcontent-editor/Chart.yaml b/charts/snapshotstoragek8sio-volumesnapshotcontent-editor/Chart.yaml index ff013832c5..73788e0206 100644 --- a/charts/snapshotstoragek8sio-volumesnapshotcontent-editor/Chart.yaml +++ b/charts/snapshotstoragek8sio-volumesnapshotcontent-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"snapshot.storage.k8s.io","version":"v1","resource":"volumesnapshotcontents"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: VolumeSnapshotContent Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: snapshotstoragek8sio-volumesnapshotcontent-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/snapshotstoragek8sio-volumesnapshotcontent-editor/README.md b/charts/snapshotstoragek8sio-volumesnapshotcontent-editor/README.md index 75fcf9eeb4..ed5b0e62ac 100644 --- a/charts/snapshotstoragek8sio-volumesnapshotcontent-editor/README.md +++ b/charts/snapshotstoragek8sio-volumesnapshotcontent-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/snapshotstoragek8sio-volumesnapshotcontent-editor --version=v0.38.0 -$ helm upgrade -i snapshotstoragek8sio-volumesnapshotcontent-editor appscode/snapshotstoragek8sio-volumesnapshotcontent-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/snapshotstoragek8sio-volumesnapshotcontent-editor --version=v0.39.0 +$ helm upgrade -i snapshotstoragek8sio-volumesnapshotcontent-editor appscode/snapshotstoragek8sio-volumesnapshotcontent-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VolumeSnapshotContent Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `snapshotstoragek8sio-volumesnapshotcontent-editor`: ```bash -$ helm upgrade -i snapshotstoragek8sio-volumesnapshotcontent-editor appscode/snapshotstoragek8sio-volumesnapshotcontent-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i snapshotstoragek8sio-volumesnapshotcontent-editor appscode/snapshotstoragek8sio-volumesnapshotcontent-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a VolumeSnapshotContent Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `snapshotstoragek8s Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i snapshotstoragek8sio-volumesnapshotcontent-editor appscode/snapshotstoragek8sio-volumesnapshotcontent-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=snapshot.storage.k8s.io/v1 +$ helm upgrade -i snapshotstoragek8sio-volumesnapshotcontent-editor appscode/snapshotstoragek8sio-volumesnapshotcontent-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=snapshot.storage.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i snapshotstoragek8sio-volumesnapshotcontent-editor appscode/snapshotstoragek8sio-volumesnapshotcontent-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i snapshotstoragek8sio-volumesnapshotcontent-editor appscode/snapshotstoragek8sio-volumesnapshotcontent-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/snsawskubedbcom-topic-editor/Chart.yaml b/charts/snsawskubedbcom-topic-editor/Chart.yaml index 961423c146..5a8155fdf7 100644 --- a/charts/snsawskubedbcom-topic-editor/Chart.yaml +++ b/charts/snsawskubedbcom-topic-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sns.aws.kubedb.com","version":"v1alpha1","resource":"topics"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Topic Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: snsawskubedbcom-topic-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/snsawskubedbcom-topic-editor/README.md b/charts/snsawskubedbcom-topic-editor/README.md index 5e81b65ba5..f2349fe351 100644 --- a/charts/snsawskubedbcom-topic-editor/README.md +++ b/charts/snsawskubedbcom-topic-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/snsawskubedbcom-topic-editor --version=v0.38.0 -$ helm upgrade -i snsawskubedbcom-topic-editor appscode/snsawskubedbcom-topic-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/snsawskubedbcom-topic-editor --version=v0.39.0 +$ helm upgrade -i snsawskubedbcom-topic-editor appscode/snsawskubedbcom-topic-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Topic Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `snsawskubedbcom-topic-editor`: ```bash -$ helm upgrade -i snsawskubedbcom-topic-editor appscode/snsawskubedbcom-topic-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i snsawskubedbcom-topic-editor appscode/snsawskubedbcom-topic-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Topic Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `snsawskubedbcom-to Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i snsawskubedbcom-topic-editor appscode/snsawskubedbcom-topic-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sns.aws.kubedb.com/v1alpha1 +$ helm upgrade -i snsawskubedbcom-topic-editor appscode/snsawskubedbcom-topic-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sns.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i snsawskubedbcom-topic-editor appscode/snsawskubedbcom-topic-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i snsawskubedbcom-topic-editor appscode/snsawskubedbcom-topic-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sourcetoolkitfluxcdio-bucket-editor/Chart.yaml b/charts/sourcetoolkitfluxcdio-bucket-editor/Chart.yaml index 5a55fbcc63..5a7775c635 100644 --- a/charts/sourcetoolkitfluxcdio-bucket-editor/Chart.yaml +++ b/charts/sourcetoolkitfluxcdio-bucket-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"source.toolkit.fluxcd.io","version":"v1beta2","resource":"buckets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Bucket Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sourcetoolkitfluxcdio-bucket-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sourcetoolkitfluxcdio-bucket-editor/README.md b/charts/sourcetoolkitfluxcdio-bucket-editor/README.md index f04bac73be..72e31dba65 100644 --- a/charts/sourcetoolkitfluxcdio-bucket-editor/README.md +++ b/charts/sourcetoolkitfluxcdio-bucket-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sourcetoolkitfluxcdio-bucket-editor --version=v0.38.0 -$ helm upgrade -i sourcetoolkitfluxcdio-bucket-editor appscode/sourcetoolkitfluxcdio-bucket-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sourcetoolkitfluxcdio-bucket-editor --version=v0.39.0 +$ helm upgrade -i sourcetoolkitfluxcdio-bucket-editor appscode/sourcetoolkitfluxcdio-bucket-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Bucket Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `sourcetoolkitfluxcdio-bucket-editor`: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-bucket-editor appscode/sourcetoolkitfluxcdio-bucket-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sourcetoolkitfluxcdio-bucket-editor appscode/sourcetoolkitfluxcdio-bucket-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Bucket Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sourcetoolkitfluxc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-bucket-editor appscode/sourcetoolkitfluxcdio-bucket-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=source.toolkit.fluxcd.io/v1beta2 +$ helm upgrade -i sourcetoolkitfluxcdio-bucket-editor appscode/sourcetoolkitfluxcdio-bucket-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=source.toolkit.fluxcd.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-bucket-editor appscode/sourcetoolkitfluxcdio-bucket-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sourcetoolkitfluxcdio-bucket-editor appscode/sourcetoolkitfluxcdio-bucket-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sourcetoolkitfluxcdio-gitrepository-editor/Chart.yaml b/charts/sourcetoolkitfluxcdio-gitrepository-editor/Chart.yaml index 07e69007bc..9e8c333352 100644 --- a/charts/sourcetoolkitfluxcdio-gitrepository-editor/Chart.yaml +++ b/charts/sourcetoolkitfluxcdio-gitrepository-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"source.toolkit.fluxcd.io","version":"v1","resource":"gitrepositories"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: GitRepository Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sourcetoolkitfluxcdio-gitrepository-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sourcetoolkitfluxcdio-gitrepository-editor/README.md b/charts/sourcetoolkitfluxcdio-gitrepository-editor/README.md index 9d1ee6ad5b..ed70103282 100644 --- a/charts/sourcetoolkitfluxcdio-gitrepository-editor/README.md +++ b/charts/sourcetoolkitfluxcdio-gitrepository-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sourcetoolkitfluxcdio-gitrepository-editor --version=v0.38.0 -$ helm upgrade -i sourcetoolkitfluxcdio-gitrepository-editor appscode/sourcetoolkitfluxcdio-gitrepository-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sourcetoolkitfluxcdio-gitrepository-editor --version=v0.39.0 +$ helm upgrade -i sourcetoolkitfluxcdio-gitrepository-editor appscode/sourcetoolkitfluxcdio-gitrepository-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GitRepository Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `sourcetoolkitfluxcdio-gitrepository-editor`: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-gitrepository-editor appscode/sourcetoolkitfluxcdio-gitrepository-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sourcetoolkitfluxcdio-gitrepository-editor appscode/sourcetoolkitfluxcdio-gitrepository-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a GitRepository Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sourcetoolkitfluxc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-gitrepository-editor appscode/sourcetoolkitfluxcdio-gitrepository-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=source.toolkit.fluxcd.io/v1 +$ helm upgrade -i sourcetoolkitfluxcdio-gitrepository-editor appscode/sourcetoolkitfluxcdio-gitrepository-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=source.toolkit.fluxcd.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-gitrepository-editor appscode/sourcetoolkitfluxcdio-gitrepository-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sourcetoolkitfluxcdio-gitrepository-editor appscode/sourcetoolkitfluxcdio-gitrepository-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sourcetoolkitfluxcdio-helmchart-editor/Chart.yaml b/charts/sourcetoolkitfluxcdio-helmchart-editor/Chart.yaml index be711d61a7..0a3454fc79 100644 --- a/charts/sourcetoolkitfluxcdio-helmchart-editor/Chart.yaml +++ b/charts/sourcetoolkitfluxcdio-helmchart-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"source.toolkit.fluxcd.io","version":"v1","resource":"helmcharts"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: HelmChart Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sourcetoolkitfluxcdio-helmchart-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sourcetoolkitfluxcdio-helmchart-editor/README.md b/charts/sourcetoolkitfluxcdio-helmchart-editor/README.md index 82ee642d83..3344cae850 100644 --- a/charts/sourcetoolkitfluxcdio-helmchart-editor/README.md +++ b/charts/sourcetoolkitfluxcdio-helmchart-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sourcetoolkitfluxcdio-helmchart-editor --version=v0.38.0 -$ helm upgrade -i sourcetoolkitfluxcdio-helmchart-editor appscode/sourcetoolkitfluxcdio-helmchart-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sourcetoolkitfluxcdio-helmchart-editor --version=v0.39.0 +$ helm upgrade -i sourcetoolkitfluxcdio-helmchart-editor appscode/sourcetoolkitfluxcdio-helmchart-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HelmChart Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `sourcetoolkitfluxcdio-helmchart-editor`: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-helmchart-editor appscode/sourcetoolkitfluxcdio-helmchart-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sourcetoolkitfluxcdio-helmchart-editor appscode/sourcetoolkitfluxcdio-helmchart-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a HelmChart Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sourcetoolkitfluxc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-helmchart-editor appscode/sourcetoolkitfluxcdio-helmchart-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=source.toolkit.fluxcd.io/v1 +$ helm upgrade -i sourcetoolkitfluxcdio-helmchart-editor appscode/sourcetoolkitfluxcdio-helmchart-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=source.toolkit.fluxcd.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-helmchart-editor appscode/sourcetoolkitfluxcdio-helmchart-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sourcetoolkitfluxcdio-helmchart-editor appscode/sourcetoolkitfluxcdio-helmchart-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sourcetoolkitfluxcdio-helmrepository-editor/Chart.yaml b/charts/sourcetoolkitfluxcdio-helmrepository-editor/Chart.yaml index 93f0b57173..afa795743b 100644 --- a/charts/sourcetoolkitfluxcdio-helmrepository-editor/Chart.yaml +++ b/charts/sourcetoolkitfluxcdio-helmrepository-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"source.toolkit.fluxcd.io","version":"v1","resource":"helmrepositories"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: HelmRepository Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sourcetoolkitfluxcdio-helmrepository-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sourcetoolkitfluxcdio-helmrepository-editor/README.md b/charts/sourcetoolkitfluxcdio-helmrepository-editor/README.md index bee0d51360..953a92adae 100644 --- a/charts/sourcetoolkitfluxcdio-helmrepository-editor/README.md +++ b/charts/sourcetoolkitfluxcdio-helmrepository-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sourcetoolkitfluxcdio-helmrepository-editor --version=v0.38.0 -$ helm upgrade -i sourcetoolkitfluxcdio-helmrepository-editor appscode/sourcetoolkitfluxcdio-helmrepository-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sourcetoolkitfluxcdio-helmrepository-editor --version=v0.39.0 +$ helm upgrade -i sourcetoolkitfluxcdio-helmrepository-editor appscode/sourcetoolkitfluxcdio-helmrepository-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HelmRepository Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `sourcetoolkitfluxcdio-helmrepository-editor`: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-helmrepository-editor appscode/sourcetoolkitfluxcdio-helmrepository-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sourcetoolkitfluxcdio-helmrepository-editor appscode/sourcetoolkitfluxcdio-helmrepository-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a HelmRepository Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sourcetoolkitfluxc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-helmrepository-editor appscode/sourcetoolkitfluxcdio-helmrepository-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=source.toolkit.fluxcd.io/v1 +$ helm upgrade -i sourcetoolkitfluxcdio-helmrepository-editor appscode/sourcetoolkitfluxcdio-helmrepository-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=source.toolkit.fluxcd.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-helmrepository-editor appscode/sourcetoolkitfluxcdio-helmrepository-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sourcetoolkitfluxcdio-helmrepository-editor appscode/sourcetoolkitfluxcdio-helmrepository-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sourcetoolkitfluxcdio-ocirepository-editor/Chart.yaml b/charts/sourcetoolkitfluxcdio-ocirepository-editor/Chart.yaml index a30b602fd5..5a0ddbd651 100644 --- a/charts/sourcetoolkitfluxcdio-ocirepository-editor/Chart.yaml +++ b/charts/sourcetoolkitfluxcdio-ocirepository-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"source.toolkit.fluxcd.io","version":"v1beta2","resource":"ocirepositories"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: OCIRepository Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sourcetoolkitfluxcdio-ocirepository-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sourcetoolkitfluxcdio-ocirepository-editor/README.md b/charts/sourcetoolkitfluxcdio-ocirepository-editor/README.md index 64bc21db3c..1dc16e7e49 100644 --- a/charts/sourcetoolkitfluxcdio-ocirepository-editor/README.md +++ b/charts/sourcetoolkitfluxcdio-ocirepository-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sourcetoolkitfluxcdio-ocirepository-editor --version=v0.38.0 -$ helm upgrade -i sourcetoolkitfluxcdio-ocirepository-editor appscode/sourcetoolkitfluxcdio-ocirepository-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sourcetoolkitfluxcdio-ocirepository-editor --version=v0.39.0 +$ helm upgrade -i sourcetoolkitfluxcdio-ocirepository-editor appscode/sourcetoolkitfluxcdio-ocirepository-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a OCIRepository Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `sourcetoolkitfluxcdio-ocirepository-editor`: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-ocirepository-editor appscode/sourcetoolkitfluxcdio-ocirepository-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sourcetoolkitfluxcdio-ocirepository-editor appscode/sourcetoolkitfluxcdio-ocirepository-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a OCIRepository Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sourcetoolkitfluxc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-ocirepository-editor appscode/sourcetoolkitfluxcdio-ocirepository-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=source.toolkit.fluxcd.io/v1beta2 +$ helm upgrade -i sourcetoolkitfluxcdio-ocirepository-editor appscode/sourcetoolkitfluxcdio-ocirepository-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=source.toolkit.fluxcd.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-ocirepository-editor appscode/sourcetoolkitfluxcdio-ocirepository-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sourcetoolkitfluxcdio-ocirepository-editor appscode/sourcetoolkitfluxcdio-ocirepository-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/spannergcpkubedbcom-database-editor/Chart.yaml b/charts/spannergcpkubedbcom-database-editor/Chart.yaml index 1f8e7c23b4..1f4933d4d7 100644 --- a/charts/spannergcpkubedbcom-database-editor/Chart.yaml +++ b/charts/spannergcpkubedbcom-database-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"spanner.gcp.kubedb.com","version":"v1alpha1","resource":"databases"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Database Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: spannergcpkubedbcom-database-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/spannergcpkubedbcom-database-editor/README.md b/charts/spannergcpkubedbcom-database-editor/README.md index df2703b7ac..f079b007f7 100644 --- a/charts/spannergcpkubedbcom-database-editor/README.md +++ b/charts/spannergcpkubedbcom-database-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/spannergcpkubedbcom-database-editor --version=v0.38.0 -$ helm upgrade -i spannergcpkubedbcom-database-editor appscode/spannergcpkubedbcom-database-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/spannergcpkubedbcom-database-editor --version=v0.39.0 +$ helm upgrade -i spannergcpkubedbcom-database-editor appscode/spannergcpkubedbcom-database-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Database Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `spannergcpkubedbcom-database-editor`: ```bash -$ helm upgrade -i spannergcpkubedbcom-database-editor appscode/spannergcpkubedbcom-database-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i spannergcpkubedbcom-database-editor appscode/spannergcpkubedbcom-database-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Database Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `spannergcpkubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i spannergcpkubedbcom-database-editor appscode/spannergcpkubedbcom-database-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=spanner.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i spannergcpkubedbcom-database-editor appscode/spannergcpkubedbcom-database-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=spanner.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i spannergcpkubedbcom-database-editor appscode/spannergcpkubedbcom-database-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i spannergcpkubedbcom-database-editor appscode/spannergcpkubedbcom-database-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/spannergcpkubedbcom-databaseiammember-editor/Chart.yaml b/charts/spannergcpkubedbcom-databaseiammember-editor/Chart.yaml index 5a3a3c3023..760abeff85 100644 --- a/charts/spannergcpkubedbcom-databaseiammember-editor/Chart.yaml +++ b/charts/spannergcpkubedbcom-databaseiammember-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"spanner.gcp.kubedb.com","version":"v1alpha1","resource":"databaseiammembers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DatabaseIAMMember Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: spannergcpkubedbcom-databaseiammember-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/spannergcpkubedbcom-databaseiammember-editor/README.md b/charts/spannergcpkubedbcom-databaseiammember-editor/README.md index c58ed07409..d5b5fd64df 100644 --- a/charts/spannergcpkubedbcom-databaseiammember-editor/README.md +++ b/charts/spannergcpkubedbcom-databaseiammember-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/spannergcpkubedbcom-databaseiammember-editor --version=v0.38.0 -$ helm upgrade -i spannergcpkubedbcom-databaseiammember-editor appscode/spannergcpkubedbcom-databaseiammember-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/spannergcpkubedbcom-databaseiammember-editor --version=v0.39.0 +$ helm upgrade -i spannergcpkubedbcom-databaseiammember-editor appscode/spannergcpkubedbcom-databaseiammember-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DatabaseIAMMember Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `spannergcpkubedbcom-databaseiammember-editor`: ```bash -$ helm upgrade -i spannergcpkubedbcom-databaseiammember-editor appscode/spannergcpkubedbcom-databaseiammember-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i spannergcpkubedbcom-databaseiammember-editor appscode/spannergcpkubedbcom-databaseiammember-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DatabaseIAMMember Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `spannergcpkubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i spannergcpkubedbcom-databaseiammember-editor appscode/spannergcpkubedbcom-databaseiammember-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=spanner.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i spannergcpkubedbcom-databaseiammember-editor appscode/spannergcpkubedbcom-databaseiammember-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=spanner.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i spannergcpkubedbcom-databaseiammember-editor appscode/spannergcpkubedbcom-databaseiammember-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i spannergcpkubedbcom-databaseiammember-editor appscode/spannergcpkubedbcom-databaseiammember-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/spannergcpkubedbcom-instance-editor/Chart.yaml b/charts/spannergcpkubedbcom-instance-editor/Chart.yaml index 9076b241b4..b3ae4ab574 100644 --- a/charts/spannergcpkubedbcom-instance-editor/Chart.yaml +++ b/charts/spannergcpkubedbcom-instance-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"spanner.gcp.kubedb.com","version":"v1alpha1","resource":"instances"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Instance Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: spannergcpkubedbcom-instance-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/spannergcpkubedbcom-instance-editor/README.md b/charts/spannergcpkubedbcom-instance-editor/README.md index b3a471722f..ee7229eeef 100644 --- a/charts/spannergcpkubedbcom-instance-editor/README.md +++ b/charts/spannergcpkubedbcom-instance-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/spannergcpkubedbcom-instance-editor --version=v0.38.0 -$ helm upgrade -i spannergcpkubedbcom-instance-editor appscode/spannergcpkubedbcom-instance-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/spannergcpkubedbcom-instance-editor --version=v0.39.0 +$ helm upgrade -i spannergcpkubedbcom-instance-editor appscode/spannergcpkubedbcom-instance-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Instance Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `spannergcpkubedbcom-instance-editor`: ```bash -$ helm upgrade -i spannergcpkubedbcom-instance-editor appscode/spannergcpkubedbcom-instance-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i spannergcpkubedbcom-instance-editor appscode/spannergcpkubedbcom-instance-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Instance Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `spannergcpkubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i spannergcpkubedbcom-instance-editor appscode/spannergcpkubedbcom-instance-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=spanner.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i spannergcpkubedbcom-instance-editor appscode/spannergcpkubedbcom-instance-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=spanner.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i spannergcpkubedbcom-instance-editor appscode/spannergcpkubedbcom-instance-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i spannergcpkubedbcom-instance-editor appscode/spannergcpkubedbcom-instance-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/spannergcpkubedbcom-instanceiammember-editor/Chart.yaml b/charts/spannergcpkubedbcom-instanceiammember-editor/Chart.yaml index 8f60d907ce..7388effbda 100644 --- a/charts/spannergcpkubedbcom-instanceiammember-editor/Chart.yaml +++ b/charts/spannergcpkubedbcom-instanceiammember-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"spanner.gcp.kubedb.com","version":"v1alpha1","resource":"instanceiammembers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: InstanceIAMMember Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: spannergcpkubedbcom-instanceiammember-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/spannergcpkubedbcom-instanceiammember-editor/README.md b/charts/spannergcpkubedbcom-instanceiammember-editor/README.md index 3fb0cc1cd5..0a39df0bbc 100644 --- a/charts/spannergcpkubedbcom-instanceiammember-editor/README.md +++ b/charts/spannergcpkubedbcom-instanceiammember-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/spannergcpkubedbcom-instanceiammember-editor --version=v0.38.0 -$ helm upgrade -i spannergcpkubedbcom-instanceiammember-editor appscode/spannergcpkubedbcom-instanceiammember-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/spannergcpkubedbcom-instanceiammember-editor --version=v0.39.0 +$ helm upgrade -i spannergcpkubedbcom-instanceiammember-editor appscode/spannergcpkubedbcom-instanceiammember-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a InstanceIAMMember Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `spannergcpkubedbcom-instanceiammember-editor`: ```bash -$ helm upgrade -i spannergcpkubedbcom-instanceiammember-editor appscode/spannergcpkubedbcom-instanceiammember-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i spannergcpkubedbcom-instanceiammember-editor appscode/spannergcpkubedbcom-instanceiammember-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a InstanceIAMMember Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `spannergcpkubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i spannergcpkubedbcom-instanceiammember-editor appscode/spannergcpkubedbcom-instanceiammember-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=spanner.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i spannergcpkubedbcom-instanceiammember-editor appscode/spannergcpkubedbcom-instanceiammember-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=spanner.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i spannergcpkubedbcom-instanceiammember-editor appscode/spannergcpkubedbcom-instanceiammember-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i spannergcpkubedbcom-instanceiammember-editor appscode/spannergcpkubedbcom-instanceiammember-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqldatabase-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqldatabase-editor/Chart.yaml index 723cae5f74..7b21a1114f 100644 --- a/charts/sqlazurekubedbcom-mssqldatabase-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqldatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqldatabases"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqldatabase-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlazurekubedbcom-mssqldatabase-editor/README.md b/charts/sqlazurekubedbcom-mssqldatabase-editor/README.md index a5f7812571..3815897913 100644 --- a/charts/sqlazurekubedbcom-mssqldatabase-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqldatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqldatabase-editor --version=v0.38.0 -$ helm upgrade -i sqlazurekubedbcom-mssqldatabase-editor appscode/sqlazurekubedbcom-mssqldatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqldatabase-editor --version=v0.39.0 +$ helm upgrade -i sqlazurekubedbcom-mssqldatabase-editor appscode/sqlazurekubedbcom-mssqldatabase-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLDatabase Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqldatabase-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqldatabase-editor appscode/sqlazurekubedbcom-mssqldatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlazurekubedbcom-mssqldatabase-editor appscode/sqlazurekubedbcom-mssqldatabase-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqldatabase-editor appscode/sqlazurekubedbcom-mssqldatabase-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqldatabase-editor appscode/sqlazurekubedbcom-mssqldatabase-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqldatabase-editor appscode/sqlazurekubedbcom-mssqldatabase-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqldatabase-editor appscode/sqlazurekubedbcom-mssqldatabase-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor/Chart.yaml index 04e9f8184a..19c0843d03 100644 --- a/charts/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqldatabasevulnerabilityassessmentrulebaselines"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLDatabaseVulnerabilityAssessmentRuleBaseline Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor/README.md b/charts/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor/README.md index 1f394f3767..1954ab1a0c 100644 --- a/charts/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor --version=v0.38.0 -$ helm upgrade -i sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor appscode/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor --version=v0.39.0 +$ helm upgrade -i sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor appscode/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLDatabaseVulnerabilityAssessmentRuleBaseline Editor on To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor appscode/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor appscode/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLDatabaseVulnerabilityAssessmentRuleBaseline Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor appscode/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor appscode/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor appscode/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor appscode/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlelasticpool-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlelasticpool-editor/Chart.yaml index 7574ac81f7..8e8b6c6fc8 100644 --- a/charts/sqlazurekubedbcom-mssqlelasticpool-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlelasticpool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlelasticpools"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLElasticPool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlelasticpool-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlazurekubedbcom-mssqlelasticpool-editor/README.md b/charts/sqlazurekubedbcom-mssqlelasticpool-editor/README.md index a7ea4d1a9d..684024976e 100644 --- a/charts/sqlazurekubedbcom-mssqlelasticpool-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlelasticpool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlelasticpool-editor --version=v0.38.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlelasticpool-editor appscode/sqlazurekubedbcom-mssqlelasticpool-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlelasticpool-editor --version=v0.39.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlelasticpool-editor appscode/sqlazurekubedbcom-mssqlelasticpool-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLElasticPool Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlelasticpool-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlelasticpool-editor appscode/sqlazurekubedbcom-mssqlelasticpool-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlelasticpool-editor appscode/sqlazurekubedbcom-mssqlelasticpool-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLElasticPool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlelasticpool-editor appscode/sqlazurekubedbcom-mssqlelasticpool-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlelasticpool-editor appscode/sqlazurekubedbcom-mssqlelasticpool-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlelasticpool-editor appscode/sqlazurekubedbcom-mssqlelasticpool-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlelasticpool-editor appscode/sqlazurekubedbcom-mssqlelasticpool-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlfailovergroup-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlfailovergroup-editor/Chart.yaml index 9c5007b02f..7abb89a0ea 100644 --- a/charts/sqlazurekubedbcom-mssqlfailovergroup-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlfailovergroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlfailovergroups"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLFailoverGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlfailovergroup-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlazurekubedbcom-mssqlfailovergroup-editor/README.md b/charts/sqlazurekubedbcom-mssqlfailovergroup-editor/README.md index 017004a3bf..e54bc55c5c 100644 --- a/charts/sqlazurekubedbcom-mssqlfailovergroup-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlfailovergroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlfailovergroup-editor --version=v0.38.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlfailovergroup-editor appscode/sqlazurekubedbcom-mssqlfailovergroup-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlfailovergroup-editor --version=v0.39.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlfailovergroup-editor appscode/sqlazurekubedbcom-mssqlfailovergroup-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLFailoverGroup Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlfailovergroup-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlfailovergroup-editor appscode/sqlazurekubedbcom-mssqlfailovergroup-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlfailovergroup-editor appscode/sqlazurekubedbcom-mssqlfailovergroup-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLFailoverGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlfailovergroup-editor appscode/sqlazurekubedbcom-mssqlfailovergroup-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlfailovergroup-editor appscode/sqlazurekubedbcom-mssqlfailovergroup-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlfailovergroup-editor appscode/sqlazurekubedbcom-mssqlfailovergroup-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlfailovergroup-editor appscode/sqlazurekubedbcom-mssqlfailovergroup-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlfirewallrule-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlfirewallrule-editor/Chart.yaml index 31314ae6c9..f41c58e684 100644 --- a/charts/sqlazurekubedbcom-mssqlfirewallrule-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlfirewallrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlfirewallrules"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLFirewallRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlfirewallrule-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlazurekubedbcom-mssqlfirewallrule-editor/README.md b/charts/sqlazurekubedbcom-mssqlfirewallrule-editor/README.md index c2c9ba9825..8a9bc9a190 100644 --- a/charts/sqlazurekubedbcom-mssqlfirewallrule-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlfirewallrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlfirewallrule-editor --version=v0.38.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlfirewallrule-editor appscode/sqlazurekubedbcom-mssqlfirewallrule-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlfirewallrule-editor --version=v0.39.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlfirewallrule-editor appscode/sqlazurekubedbcom-mssqlfirewallrule-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLFirewallRule Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlfirewallrule-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlfirewallrule-editor appscode/sqlazurekubedbcom-mssqlfirewallrule-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlfirewallrule-editor appscode/sqlazurekubedbcom-mssqlfirewallrule-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLFirewallRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlfirewallrule-editor appscode/sqlazurekubedbcom-mssqlfirewallrule-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlfirewallrule-editor appscode/sqlazurekubedbcom-mssqlfirewallrule-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlfirewallrule-editor appscode/sqlazurekubedbcom-mssqlfirewallrule-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlfirewallrule-editor appscode/sqlazurekubedbcom-mssqlfirewallrule-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqljobagent-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqljobagent-editor/Chart.yaml index 6102453456..0825434c5c 100644 --- a/charts/sqlazurekubedbcom-mssqljobagent-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqljobagent-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqljobagents"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLJobAgent Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqljobagent-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlazurekubedbcom-mssqljobagent-editor/README.md b/charts/sqlazurekubedbcom-mssqljobagent-editor/README.md index c2be49178a..00bd39666e 100644 --- a/charts/sqlazurekubedbcom-mssqljobagent-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqljobagent-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqljobagent-editor --version=v0.38.0 -$ helm upgrade -i sqlazurekubedbcom-mssqljobagent-editor appscode/sqlazurekubedbcom-mssqljobagent-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqljobagent-editor --version=v0.39.0 +$ helm upgrade -i sqlazurekubedbcom-mssqljobagent-editor appscode/sqlazurekubedbcom-mssqljobagent-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLJobAgent Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqljobagent-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqljobagent-editor appscode/sqlazurekubedbcom-mssqljobagent-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlazurekubedbcom-mssqljobagent-editor appscode/sqlazurekubedbcom-mssqljobagent-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLJobAgent Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqljobagent-editor appscode/sqlazurekubedbcom-mssqljobagent-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqljobagent-editor appscode/sqlazurekubedbcom-mssqljobagent-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqljobagent-editor appscode/sqlazurekubedbcom-mssqljobagent-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqljobagent-editor appscode/sqlazurekubedbcom-mssqljobagent-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqljobcredential-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqljobcredential-editor/Chart.yaml index ea6fd52132..dd93b4d7cf 100644 --- a/charts/sqlazurekubedbcom-mssqljobcredential-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqljobcredential-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqljobcredentials"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLJobCredential Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqljobcredential-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlazurekubedbcom-mssqljobcredential-editor/README.md b/charts/sqlazurekubedbcom-mssqljobcredential-editor/README.md index f829f0352f..fa50d0a066 100644 --- a/charts/sqlazurekubedbcom-mssqljobcredential-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqljobcredential-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqljobcredential-editor --version=v0.38.0 -$ helm upgrade -i sqlazurekubedbcom-mssqljobcredential-editor appscode/sqlazurekubedbcom-mssqljobcredential-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqljobcredential-editor --version=v0.39.0 +$ helm upgrade -i sqlazurekubedbcom-mssqljobcredential-editor appscode/sqlazurekubedbcom-mssqljobcredential-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLJobCredential Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqljobcredential-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqljobcredential-editor appscode/sqlazurekubedbcom-mssqljobcredential-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlazurekubedbcom-mssqljobcredential-editor appscode/sqlazurekubedbcom-mssqljobcredential-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLJobCredential Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqljobcredential-editor appscode/sqlazurekubedbcom-mssqljobcredential-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqljobcredential-editor appscode/sqlazurekubedbcom-mssqljobcredential-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqljobcredential-editor appscode/sqlazurekubedbcom-mssqljobcredential-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqljobcredential-editor appscode/sqlazurekubedbcom-mssqljobcredential-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlmanageddatabase-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlmanageddatabase-editor/Chart.yaml index 080cb7ebd5..fe987f07c7 100644 --- a/charts/sqlazurekubedbcom-mssqlmanageddatabase-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlmanageddatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlmanageddatabases"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLManagedDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlmanageddatabase-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlazurekubedbcom-mssqlmanageddatabase-editor/README.md b/charts/sqlazurekubedbcom-mssqlmanageddatabase-editor/README.md index 1a1853df9e..4d56f53780 100644 --- a/charts/sqlazurekubedbcom-mssqlmanageddatabase-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlmanageddatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlmanageddatabase-editor --version=v0.38.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlmanageddatabase-editor appscode/sqlazurekubedbcom-mssqlmanageddatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlmanageddatabase-editor --version=v0.39.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanageddatabase-editor appscode/sqlazurekubedbcom-mssqlmanageddatabase-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLManagedDatabase Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlmanageddatabase-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanageddatabase-editor appscode/sqlazurekubedbcom-mssqlmanageddatabase-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanageddatabase-editor appscode/sqlazurekubedbcom-mssqlmanageddatabase-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLManagedDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanageddatabase-editor appscode/sqlazurekubedbcom-mssqlmanageddatabase-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanageddatabase-editor appscode/sqlazurekubedbcom-mssqlmanageddatabase-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanageddatabase-editor appscode/sqlazurekubedbcom-mssqlmanageddatabase-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlmanageddatabase-editor appscode/sqlazurekubedbcom-mssqlmanageddatabase-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlmanagedinstance-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlmanagedinstance-editor/Chart.yaml index a43e246d90..a481f0af2e 100644 --- a/charts/sqlazurekubedbcom-mssqlmanagedinstance-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlmanagedinstance-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlmanagedinstances"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLManagedInstance Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlmanagedinstance-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlazurekubedbcom-mssqlmanagedinstance-editor/README.md b/charts/sqlazurekubedbcom-mssqlmanagedinstance-editor/README.md index 1b171c67c6..7dbfe93e35 100644 --- a/charts/sqlazurekubedbcom-mssqlmanagedinstance-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlmanagedinstance-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlmanagedinstance-editor --version=v0.38.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstance-editor appscode/sqlazurekubedbcom-mssqlmanagedinstance-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlmanagedinstance-editor --version=v0.39.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstance-editor appscode/sqlazurekubedbcom-mssqlmanagedinstance-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLManagedInstance Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlmanagedinstance-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstance-editor appscode/sqlazurekubedbcom-mssqlmanagedinstance-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstance-editor appscode/sqlazurekubedbcom-mssqlmanagedinstance-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLManagedInstance Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstance-editor appscode/sqlazurekubedbcom-mssqlmanagedinstance-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstance-editor appscode/sqlazurekubedbcom-mssqlmanagedinstance-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstance-editor appscode/sqlazurekubedbcom-mssqlmanagedinstance-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstance-editor appscode/sqlazurekubedbcom-mssqlmanagedinstance-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor/Chart.yaml index df3f91782c..9359488807 100644 --- a/charts/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlmanagedinstanceactivedirectoryadministrators"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLManagedInstanceActiveDirectoryAdministrator Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor/README.md b/charts/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor/README.md index ba8b567728..28a9f38005 100644 --- a/charts/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor --version=v0.38.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor appscode/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor --version=v0.39.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor appscode/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLManagedInstanceActiveDirectoryAdministrator Editor on To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor appscode/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor appscode/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLManagedInstanceActiveDirectoryAdministrator Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor appscode/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor appscode/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor appscode/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor appscode/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor/Chart.yaml index 1a247488f7..a2ee7ccaac 100644 --- a/charts/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlmanagedinstancefailovergroups"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLManagedInstanceFailoverGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor/README.md b/charts/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor/README.md index 23797f770d..4e99abfd2f 100644 --- a/charts/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor --version=v0.38.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor --version=v0.39.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLManagedInstanceFailoverGroup Editor on a [Kubernetes]( To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLManagedInstanceFailoverGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor/Chart.yaml index 910cdbdc71..e0ee1a7c89 100644 --- a/charts/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlmanagedinstancevulnerabilityassessments"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLManagedInstanceVulnerabilityAssessment Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor/README.md b/charts/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor/README.md index 1990e4da7f..23aabfedec 100644 --- a/charts/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor --version=v0.38.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor --version=v0.39.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLManagedInstanceVulnerabilityAssessment Editor on a [Ku To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLManagedInstanceVulnerabilityAssessment Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqloutboundfirewallrule-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqloutboundfirewallrule-editor/Chart.yaml index af41e33597..27e8982bda 100644 --- a/charts/sqlazurekubedbcom-mssqloutboundfirewallrule-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqloutboundfirewallrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqloutboundfirewallrules"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLOutboundFirewallRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqloutboundfirewallrule-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlazurekubedbcom-mssqloutboundfirewallrule-editor/README.md b/charts/sqlazurekubedbcom-mssqloutboundfirewallrule-editor/README.md index 6b95bfe658..40c494cb65 100644 --- a/charts/sqlazurekubedbcom-mssqloutboundfirewallrule-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqloutboundfirewallrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqloutboundfirewallrule-editor --version=v0.38.0 -$ helm upgrade -i sqlazurekubedbcom-mssqloutboundfirewallrule-editor appscode/sqlazurekubedbcom-mssqloutboundfirewallrule-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqloutboundfirewallrule-editor --version=v0.39.0 +$ helm upgrade -i sqlazurekubedbcom-mssqloutboundfirewallrule-editor appscode/sqlazurekubedbcom-mssqloutboundfirewallrule-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLOutboundFirewallRule Editor on a [Kubernetes](http://k To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqloutboundfirewallrule-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqloutboundfirewallrule-editor appscode/sqlazurekubedbcom-mssqloutboundfirewallrule-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlazurekubedbcom-mssqloutboundfirewallrule-editor appscode/sqlazurekubedbcom-mssqloutboundfirewallrule-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLOutboundFirewallRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqloutboundfirewallrule-editor appscode/sqlazurekubedbcom-mssqloutboundfirewallrule-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqloutboundfirewallrule-editor appscode/sqlazurekubedbcom-mssqloutboundfirewallrule-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqloutboundfirewallrule-editor appscode/sqlazurekubedbcom-mssqloutboundfirewallrule-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqloutboundfirewallrule-editor appscode/sqlazurekubedbcom-mssqloutboundfirewallrule-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlserver-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlserver-editor/Chart.yaml index 8ba9278aff..6e92ee5494 100644 --- a/charts/sqlazurekubedbcom-mssqlserver-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlserver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlservers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLServer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlserver-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlazurekubedbcom-mssqlserver-editor/README.md b/charts/sqlazurekubedbcom-mssqlserver-editor/README.md index 880508350e..21f053fc00 100644 --- a/charts/sqlazurekubedbcom-mssqlserver-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlserver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlserver-editor --version=v0.38.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlserver-editor appscode/sqlazurekubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlserver-editor --version=v0.39.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlserver-editor appscode/sqlazurekubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServer Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlserver-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlserver-editor appscode/sqlazurekubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlserver-editor appscode/sqlazurekubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLServer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlserver-editor appscode/sqlazurekubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlserver-editor appscode/sqlazurekubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlserver-editor appscode/sqlazurekubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlserver-editor appscode/sqlazurekubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlserverdnsalias-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlserverdnsalias-editor/Chart.yaml index e1d1baf781..5170856317 100644 --- a/charts/sqlazurekubedbcom-mssqlserverdnsalias-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlserverdnsalias-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlserverdnsaliases"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLServerDNSAlias Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlserverdnsalias-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlazurekubedbcom-mssqlserverdnsalias-editor/README.md b/charts/sqlazurekubedbcom-mssqlserverdnsalias-editor/README.md index 242498df2c..9cbc57d3b5 100644 --- a/charts/sqlazurekubedbcom-mssqlserverdnsalias-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlserverdnsalias-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlserverdnsalias-editor --version=v0.38.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlserverdnsalias-editor appscode/sqlazurekubedbcom-mssqlserverdnsalias-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlserverdnsalias-editor --version=v0.39.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlserverdnsalias-editor appscode/sqlazurekubedbcom-mssqlserverdnsalias-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerDNSAlias Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlserverdnsalias-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlserverdnsalias-editor appscode/sqlazurekubedbcom-mssqlserverdnsalias-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlserverdnsalias-editor appscode/sqlazurekubedbcom-mssqlserverdnsalias-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLServerDNSAlias Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlserverdnsalias-editor appscode/sqlazurekubedbcom-mssqlserverdnsalias-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlserverdnsalias-editor appscode/sqlazurekubedbcom-mssqlserverdnsalias-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlserverdnsalias-editor appscode/sqlazurekubedbcom-mssqlserverdnsalias-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlserverdnsalias-editor appscode/sqlazurekubedbcom-mssqlserverdnsalias-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor/Chart.yaml index fbd75798a7..55ffd2dc06 100644 --- a/charts/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlservermicrosoftsupportauditingpolicies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLServerMicrosoftSupportAuditingPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor/README.md b/charts/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor/README.md index 431bbe1011..1d75daa9fa 100644 --- a/charts/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor --version=v0.38.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor appscode/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor --version=v0.39.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor appscode/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerMicrosoftSupportAuditingPolicy Editor on a [Kube To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor appscode/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor appscode/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLServerMicrosoftSupportAuditingPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor appscode/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor appscode/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor appscode/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor appscode/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor/Chart.yaml index 32a00217da..0a603d3a03 100644 --- a/charts/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlserversecurityalertpolicies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLServerSecurityAlertPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor/README.md b/charts/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor/README.md index e2b935cba7..89506e5c9e 100644 --- a/charts/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor --version=v0.38.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor appscode/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor --version=v0.39.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor appscode/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerSecurityAlertPolicy Editor on a [Kubernetes](htt To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor appscode/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor appscode/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLServerSecurityAlertPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor appscode/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor appscode/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor appscode/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor appscode/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor/Chart.yaml index 4f910f6e35..b78c0b516a 100644 --- a/charts/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlservertransparentdataencryptions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLServerTransparentDataEncryption Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlservertransparentdataencryption-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor/README.md b/charts/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor/README.md index 7a04a90a2c..e0daf37711 100644 --- a/charts/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor --version=v0.38.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlservertransparentdataencryption-editor appscode/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor --version=v0.39.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlservertransparentdataencryption-editor appscode/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerTransparentDataEncryption Editor on a [Kubernete To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlservertransparentdataencryption-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlservertransparentdataencryption-editor appscode/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlservertransparentdataencryption-editor appscode/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLServerTransparentDataEncryption Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlservertransparentdataencryption-editor appscode/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlservertransparentdataencryption-editor appscode/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlservertransparentdataencryption-editor appscode/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlservertransparentdataencryption-editor appscode/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor/Chart.yaml index 2f00994160..f7aaa20054 100644 --- a/charts/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlservervulnerabilityassessments"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLServerVulnerabilityAssessment Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor/README.md b/charts/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor/README.md index 4cdc3dc5d6..a31ce7760a 100644 --- a/charts/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor --version=v0.38.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor --version=v0.39.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerVulnerabilityAssessment Editor on a [Kubernetes] To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLServerVulnerabilityAssessment Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor/Chart.yaml index abfe43c956..9e8a352092 100644 --- a/charts/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlvirtualnetworkrules"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MSSQLVirtualNetworkRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlvirtualnetworkrule-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor/README.md b/charts/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor/README.md index 52c8324e0c..2e662860ac 100644 --- a/charts/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor --version=v0.38.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlvirtualnetworkrule-editor appscode/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor --version=v0.39.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlvirtualnetworkrule-editor appscode/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLVirtualNetworkRule Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlvirtualnetworkrule-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlvirtualnetworkrule-editor appscode/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlvirtualnetworkrule-editor appscode/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MSSQLVirtualNetworkRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlvirtualnetworkrule-editor appscode/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlvirtualnetworkrule-editor appscode/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlvirtualnetworkrule-editor appscode/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlvirtualnetworkrule-editor appscode/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlgcpkubedbcom-database-editor/Chart.yaml b/charts/sqlgcpkubedbcom-database-editor/Chart.yaml index 4bd6438d60..d72e0d5f95 100644 --- a/charts/sqlgcpkubedbcom-database-editor/Chart.yaml +++ b/charts/sqlgcpkubedbcom-database-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.gcp.kubedb.com","version":"v1alpha1","resource":"databases"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Database Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlgcpkubedbcom-database-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlgcpkubedbcom-database-editor/README.md b/charts/sqlgcpkubedbcom-database-editor/README.md index ebd3c61b38..b85fe356b8 100644 --- a/charts/sqlgcpkubedbcom-database-editor/README.md +++ b/charts/sqlgcpkubedbcom-database-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlgcpkubedbcom-database-editor --version=v0.38.0 -$ helm upgrade -i sqlgcpkubedbcom-database-editor appscode/sqlgcpkubedbcom-database-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlgcpkubedbcom-database-editor --version=v0.39.0 +$ helm upgrade -i sqlgcpkubedbcom-database-editor appscode/sqlgcpkubedbcom-database-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Database Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `sqlgcpkubedbcom-database-editor`: ```bash -$ helm upgrade -i sqlgcpkubedbcom-database-editor appscode/sqlgcpkubedbcom-database-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlgcpkubedbcom-database-editor appscode/sqlgcpkubedbcom-database-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Database Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlgcpkubedbcom-da Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlgcpkubedbcom-database-editor appscode/sqlgcpkubedbcom-database-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i sqlgcpkubedbcom-database-editor appscode/sqlgcpkubedbcom-database-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlgcpkubedbcom-database-editor appscode/sqlgcpkubedbcom-database-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlgcpkubedbcom-database-editor appscode/sqlgcpkubedbcom-database-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlgcpkubedbcom-databaseinstance-editor/Chart.yaml b/charts/sqlgcpkubedbcom-databaseinstance-editor/Chart.yaml index 03825632a6..61084aa024 100644 --- a/charts/sqlgcpkubedbcom-databaseinstance-editor/Chart.yaml +++ b/charts/sqlgcpkubedbcom-databaseinstance-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.gcp.kubedb.com","version":"v1alpha1","resource":"databaseinstances"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DatabaseInstance Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlgcpkubedbcom-databaseinstance-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlgcpkubedbcom-databaseinstance-editor/README.md b/charts/sqlgcpkubedbcom-databaseinstance-editor/README.md index 9b318218e0..99fc9673f1 100644 --- a/charts/sqlgcpkubedbcom-databaseinstance-editor/README.md +++ b/charts/sqlgcpkubedbcom-databaseinstance-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlgcpkubedbcom-databaseinstance-editor --version=v0.38.0 -$ helm upgrade -i sqlgcpkubedbcom-databaseinstance-editor appscode/sqlgcpkubedbcom-databaseinstance-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlgcpkubedbcom-databaseinstance-editor --version=v0.39.0 +$ helm upgrade -i sqlgcpkubedbcom-databaseinstance-editor appscode/sqlgcpkubedbcom-databaseinstance-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DatabaseInstance Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `sqlgcpkubedbcom-databaseinstance-editor`: ```bash -$ helm upgrade -i sqlgcpkubedbcom-databaseinstance-editor appscode/sqlgcpkubedbcom-databaseinstance-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlgcpkubedbcom-databaseinstance-editor appscode/sqlgcpkubedbcom-databaseinstance-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DatabaseInstance Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlgcpkubedbcom-da Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlgcpkubedbcom-databaseinstance-editor appscode/sqlgcpkubedbcom-databaseinstance-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i sqlgcpkubedbcom-databaseinstance-editor appscode/sqlgcpkubedbcom-databaseinstance-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlgcpkubedbcom-databaseinstance-editor appscode/sqlgcpkubedbcom-databaseinstance-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlgcpkubedbcom-databaseinstance-editor appscode/sqlgcpkubedbcom-databaseinstance-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlgcpkubedbcom-sourcerepresentationinstance-editor/Chart.yaml b/charts/sqlgcpkubedbcom-sourcerepresentationinstance-editor/Chart.yaml index 95aee75251..62a861239f 100644 --- a/charts/sqlgcpkubedbcom-sourcerepresentationinstance-editor/Chart.yaml +++ b/charts/sqlgcpkubedbcom-sourcerepresentationinstance-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.gcp.kubedb.com","version":"v1alpha1","resource":"sourcerepresentationinstances"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SourceRepresentationInstance Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlgcpkubedbcom-sourcerepresentationinstance-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlgcpkubedbcom-sourcerepresentationinstance-editor/README.md b/charts/sqlgcpkubedbcom-sourcerepresentationinstance-editor/README.md index c09c4ba03c..09669de6dd 100644 --- a/charts/sqlgcpkubedbcom-sourcerepresentationinstance-editor/README.md +++ b/charts/sqlgcpkubedbcom-sourcerepresentationinstance-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlgcpkubedbcom-sourcerepresentationinstance-editor --version=v0.38.0 -$ helm upgrade -i sqlgcpkubedbcom-sourcerepresentationinstance-editor appscode/sqlgcpkubedbcom-sourcerepresentationinstance-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlgcpkubedbcom-sourcerepresentationinstance-editor --version=v0.39.0 +$ helm upgrade -i sqlgcpkubedbcom-sourcerepresentationinstance-editor appscode/sqlgcpkubedbcom-sourcerepresentationinstance-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SourceRepresentationInstance Editor on a [Kubernetes](http: To install/upgrade the chart with the release name `sqlgcpkubedbcom-sourcerepresentationinstance-editor`: ```bash -$ helm upgrade -i sqlgcpkubedbcom-sourcerepresentationinstance-editor appscode/sqlgcpkubedbcom-sourcerepresentationinstance-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlgcpkubedbcom-sourcerepresentationinstance-editor appscode/sqlgcpkubedbcom-sourcerepresentationinstance-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SourceRepresentationInstance Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlgcpkubedbcom-so Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlgcpkubedbcom-sourcerepresentationinstance-editor appscode/sqlgcpkubedbcom-sourcerepresentationinstance-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i sqlgcpkubedbcom-sourcerepresentationinstance-editor appscode/sqlgcpkubedbcom-sourcerepresentationinstance-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlgcpkubedbcom-sourcerepresentationinstance-editor appscode/sqlgcpkubedbcom-sourcerepresentationinstance-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlgcpkubedbcom-sourcerepresentationinstance-editor appscode/sqlgcpkubedbcom-sourcerepresentationinstance-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlgcpkubedbcom-sslcert-editor/Chart.yaml b/charts/sqlgcpkubedbcom-sslcert-editor/Chart.yaml index 2d494e39e4..5383945715 100644 --- a/charts/sqlgcpkubedbcom-sslcert-editor/Chart.yaml +++ b/charts/sqlgcpkubedbcom-sslcert-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.gcp.kubedb.com","version":"v1alpha1","resource":"sslcerts"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SSLCert Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlgcpkubedbcom-sslcert-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlgcpkubedbcom-sslcert-editor/README.md b/charts/sqlgcpkubedbcom-sslcert-editor/README.md index 15b9766d15..4e33e2512d 100644 --- a/charts/sqlgcpkubedbcom-sslcert-editor/README.md +++ b/charts/sqlgcpkubedbcom-sslcert-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlgcpkubedbcom-sslcert-editor --version=v0.38.0 -$ helm upgrade -i sqlgcpkubedbcom-sslcert-editor appscode/sqlgcpkubedbcom-sslcert-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlgcpkubedbcom-sslcert-editor --version=v0.39.0 +$ helm upgrade -i sqlgcpkubedbcom-sslcert-editor appscode/sqlgcpkubedbcom-sslcert-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SSLCert Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `sqlgcpkubedbcom-sslcert-editor`: ```bash -$ helm upgrade -i sqlgcpkubedbcom-sslcert-editor appscode/sqlgcpkubedbcom-sslcert-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlgcpkubedbcom-sslcert-editor appscode/sqlgcpkubedbcom-sslcert-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SSLCert Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlgcpkubedbcom-ss Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlgcpkubedbcom-sslcert-editor appscode/sqlgcpkubedbcom-sslcert-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i sqlgcpkubedbcom-sslcert-editor appscode/sqlgcpkubedbcom-sslcert-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlgcpkubedbcom-sslcert-editor appscode/sqlgcpkubedbcom-sslcert-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlgcpkubedbcom-sslcert-editor appscode/sqlgcpkubedbcom-sslcert-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/sqlgcpkubedbcom-user-editor/Chart.yaml b/charts/sqlgcpkubedbcom-user-editor/Chart.yaml index 19ee0598e9..5b1c39c974 100644 --- a/charts/sqlgcpkubedbcom-user-editor/Chart.yaml +++ b/charts/sqlgcpkubedbcom-user-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.gcp.kubedb.com","version":"v1alpha1","resource":"users"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: User Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlgcpkubedbcom-user-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/sqlgcpkubedbcom-user-editor/README.md b/charts/sqlgcpkubedbcom-user-editor/README.md index dabfe1d470..03553e26ea 100644 --- a/charts/sqlgcpkubedbcom-user-editor/README.md +++ b/charts/sqlgcpkubedbcom-user-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlgcpkubedbcom-user-editor --version=v0.38.0 -$ helm upgrade -i sqlgcpkubedbcom-user-editor appscode/sqlgcpkubedbcom-user-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/sqlgcpkubedbcom-user-editor --version=v0.39.0 +$ helm upgrade -i sqlgcpkubedbcom-user-editor appscode/sqlgcpkubedbcom-user-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a User Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `sqlgcpkubedbcom-user-editor`: ```bash -$ helm upgrade -i sqlgcpkubedbcom-user-editor appscode/sqlgcpkubedbcom-user-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i sqlgcpkubedbcom-user-editor appscode/sqlgcpkubedbcom-user-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a User Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlgcpkubedbcom-us Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlgcpkubedbcom-user-editor appscode/sqlgcpkubedbcom-user-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=sql.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i sqlgcpkubedbcom-user-editor appscode/sqlgcpkubedbcom-user-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=sql.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlgcpkubedbcom-user-editor appscode/sqlgcpkubedbcom-user-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i sqlgcpkubedbcom-user-editor appscode/sqlgcpkubedbcom-user-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-backupbatch-editor/Chart.yaml b/charts/stashappscodecom-backupbatch-editor/Chart.yaml index 6f34f40dbe..7488d50cc6 100644 --- a/charts/stashappscodecom-backupbatch-editor/Chart.yaml +++ b/charts/stashappscodecom-backupbatch-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"stash.appscode.com","version":"v1beta1","resource":"backupbatches"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: BackupBatch Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: stashappscodecom-backupbatch-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/stashappscodecom-backupbatch-editor/README.md b/charts/stashappscodecom-backupbatch-editor/README.md index f9b7c51f13..243d46ccf5 100644 --- a/charts/stashappscodecom-backupbatch-editor/README.md +++ b/charts/stashappscodecom-backupbatch-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-backupbatch-editor --version=v0.38.0 -$ helm upgrade -i stashappscodecom-backupbatch-editor appscode/stashappscodecom-backupbatch-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/stashappscodecom-backupbatch-editor --version=v0.39.0 +$ helm upgrade -i stashappscodecom-backupbatch-editor appscode/stashappscodecom-backupbatch-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupBatch Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `stashappscodecom-backupbatch-editor`: ```bash -$ helm upgrade -i stashappscodecom-backupbatch-editor appscode/stashappscodecom-backupbatch-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i stashappscodecom-backupbatch-editor appscode/stashappscodecom-backupbatch-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a BackupBatch Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `stashappscodecom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-backupbatch-editor appscode/stashappscodecom-backupbatch-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=stash.appscode.com/v1beta1 +$ helm upgrade -i stashappscodecom-backupbatch-editor appscode/stashappscodecom-backupbatch-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=stash.appscode.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-backupbatch-editor appscode/stashappscodecom-backupbatch-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i stashappscodecom-backupbatch-editor appscode/stashappscodecom-backupbatch-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-backupblueprint-editor/Chart.yaml b/charts/stashappscodecom-backupblueprint-editor/Chart.yaml index 41b43b9373..2bad2cab0f 100644 --- a/charts/stashappscodecom-backupblueprint-editor/Chart.yaml +++ b/charts/stashappscodecom-backupblueprint-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"stash.appscode.com","version":"v1beta1","resource":"backupblueprints"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: BackupBlueprint Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: stashappscodecom-backupblueprint-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/stashappscodecom-backupblueprint-editor/README.md b/charts/stashappscodecom-backupblueprint-editor/README.md index 53bdd55e38..a7e921b88e 100644 --- a/charts/stashappscodecom-backupblueprint-editor/README.md +++ b/charts/stashappscodecom-backupblueprint-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-backupblueprint-editor --version=v0.38.0 -$ helm upgrade -i stashappscodecom-backupblueprint-editor appscode/stashappscodecom-backupblueprint-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/stashappscodecom-backupblueprint-editor --version=v0.39.0 +$ helm upgrade -i stashappscodecom-backupblueprint-editor appscode/stashappscodecom-backupblueprint-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupBlueprint Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `stashappscodecom-backupblueprint-editor`: ```bash -$ helm upgrade -i stashappscodecom-backupblueprint-editor appscode/stashappscodecom-backupblueprint-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i stashappscodecom-backupblueprint-editor appscode/stashappscodecom-backupblueprint-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a BackupBlueprint Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `stashappscodecom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-backupblueprint-editor appscode/stashappscodecom-backupblueprint-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=stash.appscode.com/v1beta1 +$ helm upgrade -i stashappscodecom-backupblueprint-editor appscode/stashappscodecom-backupblueprint-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=stash.appscode.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-backupblueprint-editor appscode/stashappscodecom-backupblueprint-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i stashappscodecom-backupblueprint-editor appscode/stashappscodecom-backupblueprint-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-backupconfiguration-editor/Chart.yaml b/charts/stashappscodecom-backupconfiguration-editor/Chart.yaml index 29bf9bfc92..aec5d071d2 100644 --- a/charts/stashappscodecom-backupconfiguration-editor/Chart.yaml +++ b/charts/stashappscodecom-backupconfiguration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"stash.appscode.com","version":"v1beta1","resource":"backupconfigurations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: BackupConfiguration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: stashappscodecom-backupconfiguration-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/stashappscodecom-backupconfiguration-editor/README.md b/charts/stashappscodecom-backupconfiguration-editor/README.md index 471f6675ad..0dcd125ccb 100644 --- a/charts/stashappscodecom-backupconfiguration-editor/README.md +++ b/charts/stashappscodecom-backupconfiguration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-backupconfiguration-editor --version=v0.38.0 -$ helm upgrade -i stashappscodecom-backupconfiguration-editor appscode/stashappscodecom-backupconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/stashappscodecom-backupconfiguration-editor --version=v0.39.0 +$ helm upgrade -i stashappscodecom-backupconfiguration-editor appscode/stashappscodecom-backupconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupConfiguration Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `stashappscodecom-backupconfiguration-editor`: ```bash -$ helm upgrade -i stashappscodecom-backupconfiguration-editor appscode/stashappscodecom-backupconfiguration-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i stashappscodecom-backupconfiguration-editor appscode/stashappscodecom-backupconfiguration-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a BackupConfiguration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `stashappscodecom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-backupconfiguration-editor appscode/stashappscodecom-backupconfiguration-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=stash.appscode.com/v1beta1 +$ helm upgrade -i stashappscodecom-backupconfiguration-editor appscode/stashappscodecom-backupconfiguration-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=stash.appscode.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-backupconfiguration-editor appscode/stashappscodecom-backupconfiguration-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i stashappscodecom-backupconfiguration-editor appscode/stashappscodecom-backupconfiguration-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-backupsession-editor/Chart.yaml b/charts/stashappscodecom-backupsession-editor/Chart.yaml index 86440d9a3f..b1d900e935 100644 --- a/charts/stashappscodecom-backupsession-editor/Chart.yaml +++ b/charts/stashappscodecom-backupsession-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"stash.appscode.com","version":"v1beta1","resource":"backupsessions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: BackupSession Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: stashappscodecom-backupsession-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/stashappscodecom-backupsession-editor/README.md b/charts/stashappscodecom-backupsession-editor/README.md index 17362184a8..c6c64b5d97 100644 --- a/charts/stashappscodecom-backupsession-editor/README.md +++ b/charts/stashappscodecom-backupsession-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-backupsession-editor --version=v0.38.0 -$ helm upgrade -i stashappscodecom-backupsession-editor appscode/stashappscodecom-backupsession-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/stashappscodecom-backupsession-editor --version=v0.39.0 +$ helm upgrade -i stashappscodecom-backupsession-editor appscode/stashappscodecom-backupsession-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupSession Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `stashappscodecom-backupsession-editor`: ```bash -$ helm upgrade -i stashappscodecom-backupsession-editor appscode/stashappscodecom-backupsession-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i stashappscodecom-backupsession-editor appscode/stashappscodecom-backupsession-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a BackupSession Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `stashappscodecom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-backupsession-editor appscode/stashappscodecom-backupsession-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=stash.appscode.com/v1beta1 +$ helm upgrade -i stashappscodecom-backupsession-editor appscode/stashappscodecom-backupsession-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=stash.appscode.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-backupsession-editor appscode/stashappscodecom-backupsession-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i stashappscodecom-backupsession-editor appscode/stashappscodecom-backupsession-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-function-editor/Chart.yaml b/charts/stashappscodecom-function-editor/Chart.yaml index 3d203f0354..e66c81d84f 100644 --- a/charts/stashappscodecom-function-editor/Chart.yaml +++ b/charts/stashappscodecom-function-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"stash.appscode.com","version":"v1beta1","resource":"functions"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Function Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: stashappscodecom-function-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/stashappscodecom-function-editor/README.md b/charts/stashappscodecom-function-editor/README.md index feaf7841a1..f66c43d4c5 100644 --- a/charts/stashappscodecom-function-editor/README.md +++ b/charts/stashappscodecom-function-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-function-editor --version=v0.38.0 -$ helm upgrade -i stashappscodecom-function-editor appscode/stashappscodecom-function-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/stashappscodecom-function-editor --version=v0.39.0 +$ helm upgrade -i stashappscodecom-function-editor appscode/stashappscodecom-function-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Function Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `stashappscodecom-function-editor`: ```bash -$ helm upgrade -i stashappscodecom-function-editor appscode/stashappscodecom-function-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i stashappscodecom-function-editor appscode/stashappscodecom-function-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Function Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `stashappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-function-editor appscode/stashappscodecom-function-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=stash.appscode.com/v1beta1 +$ helm upgrade -i stashappscodecom-function-editor appscode/stashappscodecom-function-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=stash.appscode.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-function-editor appscode/stashappscodecom-function-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i stashappscodecom-function-editor appscode/stashappscodecom-function-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-recovery-editor/Chart.yaml b/charts/stashappscodecom-recovery-editor/Chart.yaml index eacf4e63fc..61568f67e8 100644 --- a/charts/stashappscodecom-recovery-editor/Chart.yaml +++ b/charts/stashappscodecom-recovery-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"stash.appscode.com","version":"v1alpha1","resource":"recoveries"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Recovery Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: stashappscodecom-recovery-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/stashappscodecom-recovery-editor/README.md b/charts/stashappscodecom-recovery-editor/README.md index 337596cf55..259de97364 100644 --- a/charts/stashappscodecom-recovery-editor/README.md +++ b/charts/stashappscodecom-recovery-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-recovery-editor --version=v0.38.0 -$ helm upgrade -i stashappscodecom-recovery-editor appscode/stashappscodecom-recovery-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/stashappscodecom-recovery-editor --version=v0.39.0 +$ helm upgrade -i stashappscodecom-recovery-editor appscode/stashappscodecom-recovery-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Recovery Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `stashappscodecom-recovery-editor`: ```bash -$ helm upgrade -i stashappscodecom-recovery-editor appscode/stashappscodecom-recovery-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i stashappscodecom-recovery-editor appscode/stashappscodecom-recovery-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Recovery Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `stashappscodecom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-recovery-editor appscode/stashappscodecom-recovery-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=stash.appscode.com/v1alpha1 +$ helm upgrade -i stashappscodecom-recovery-editor appscode/stashappscodecom-recovery-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=stash.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-recovery-editor appscode/stashappscodecom-recovery-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i stashappscodecom-recovery-editor appscode/stashappscodecom-recovery-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-repository-editor-options/Chart.yaml b/charts/stashappscodecom-repository-editor-options/Chart.yaml index 610194755c..82bc0409bf 100644 --- a/charts/stashappscodecom-repository-editor-options/Chart.yaml +++ b/charts/stashappscodecom-repository-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: stashappscodecom-repository-editor-options description: Stash Repository Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/stashappscodecom-repository-editor-options/README.md b/charts/stashappscodecom-repository-editor-options/README.md index 640fa94a61..f203c403b4 100644 --- a/charts/stashappscodecom-repository-editor-options/README.md +++ b/charts/stashappscodecom-repository-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-repository-editor-options --version=v0.38.0 -$ helm upgrade -i stashappscodecom-repository-editor-options appscode/stashappscodecom-repository-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/stashappscodecom-repository-editor-options --version=v0.39.0 +$ helm upgrade -i stashappscodecom-repository-editor-options appscode/stashappscodecom-repository-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Stash Repository Editor UI Options on a [Kubernetes](http:/ To install/upgrade the chart with the release name `stashappscodecom-repository-editor-options`: ```bash -$ helm upgrade -i stashappscodecom-repository-editor-options appscode/stashappscodecom-repository-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i stashappscodecom-repository-editor-options appscode/stashappscodecom-repository-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Stash Repository Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -92,12 +92,12 @@ The following table lists the configurable parameters of the `stashappscodecom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-repository-editor-options appscode/stashappscodecom-repository-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=stash.appscode.com +$ helm upgrade -i stashappscodecom-repository-editor-options appscode/stashappscodecom-repository-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=stash.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-repository-editor-options appscode/stashappscodecom-repository-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i stashappscodecom-repository-editor-options appscode/stashappscodecom-repository-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-repository-editor/Chart.yaml b/charts/stashappscodecom-repository-editor/Chart.yaml index 34a9251bfa..9ab3e1d43e 100644 --- a/charts/stashappscodecom-repository-editor/Chart.yaml +++ b/charts/stashappscodecom-repository-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ \ stash.appscode.com\n kind: Repository\n version: v1alpha1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Repository Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: stashappscodecom-repository-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/stashappscodecom-repository-editor/README.md b/charts/stashappscodecom-repository-editor/README.md index 66671707b2..1e0fe5f8a4 100644 --- a/charts/stashappscodecom-repository-editor/README.md +++ b/charts/stashappscodecom-repository-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-repository-editor --version=v0.38.0 -$ helm upgrade -i stashappscodecom-repository-editor appscode/stashappscodecom-repository-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/stashappscodecom-repository-editor --version=v0.39.0 +$ helm upgrade -i stashappscodecom-repository-editor appscode/stashappscodecom-repository-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Repository Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `stashappscodecom-repository-editor`: ```bash -$ helm upgrade -i stashappscodecom-repository-editor appscode/stashappscodecom-repository-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i stashappscodecom-repository-editor appscode/stashappscodecom-repository-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Repository Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -61,12 +61,12 @@ The following table lists the configurable parameters of the `stashappscodecom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-repository-editor appscode/stashappscodecom-repository-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=stash.appscode.com +$ helm upgrade -i stashappscodecom-repository-editor appscode/stashappscodecom-repository-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=stash.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-repository-editor appscode/stashappscodecom-repository-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i stashappscodecom-repository-editor appscode/stashappscodecom-repository-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-restic-editor/Chart.yaml b/charts/stashappscodecom-restic-editor/Chart.yaml index 90f5b5c8b0..491909f4b5 100644 --- a/charts/stashappscodecom-restic-editor/Chart.yaml +++ b/charts/stashappscodecom-restic-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"stash.appscode.com","version":"v1alpha1","resource":"restics"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Restic Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: stashappscodecom-restic-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/stashappscodecom-restic-editor/README.md b/charts/stashappscodecom-restic-editor/README.md index 4277230187..a523b02e8d 100644 --- a/charts/stashappscodecom-restic-editor/README.md +++ b/charts/stashappscodecom-restic-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-restic-editor --version=v0.38.0 -$ helm upgrade -i stashappscodecom-restic-editor appscode/stashappscodecom-restic-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/stashappscodecom-restic-editor --version=v0.39.0 +$ helm upgrade -i stashappscodecom-restic-editor appscode/stashappscodecom-restic-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Restic Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `stashappscodecom-restic-editor`: ```bash -$ helm upgrade -i stashappscodecom-restic-editor appscode/stashappscodecom-restic-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i stashappscodecom-restic-editor appscode/stashappscodecom-restic-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Restic Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `stashappscodecom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-restic-editor appscode/stashappscodecom-restic-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=stash.appscode.com/v1alpha1 +$ helm upgrade -i stashappscodecom-restic-editor appscode/stashappscodecom-restic-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=stash.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-restic-editor appscode/stashappscodecom-restic-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i stashappscodecom-restic-editor appscode/stashappscodecom-restic-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-restorebatch-editor/Chart.yaml b/charts/stashappscodecom-restorebatch-editor/Chart.yaml index 6b94da582d..e8e753fb37 100644 --- a/charts/stashappscodecom-restorebatch-editor/Chart.yaml +++ b/charts/stashappscodecom-restorebatch-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"stash.appscode.com","version":"v1beta1","resource":"restorebatches"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RestoreBatch Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: stashappscodecom-restorebatch-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/stashappscodecom-restorebatch-editor/README.md b/charts/stashappscodecom-restorebatch-editor/README.md index 672982ab76..b0039ed29c 100644 --- a/charts/stashappscodecom-restorebatch-editor/README.md +++ b/charts/stashappscodecom-restorebatch-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-restorebatch-editor --version=v0.38.0 -$ helm upgrade -i stashappscodecom-restorebatch-editor appscode/stashappscodecom-restorebatch-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/stashappscodecom-restorebatch-editor --version=v0.39.0 +$ helm upgrade -i stashappscodecom-restorebatch-editor appscode/stashappscodecom-restorebatch-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RestoreBatch Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `stashappscodecom-restorebatch-editor`: ```bash -$ helm upgrade -i stashappscodecom-restorebatch-editor appscode/stashappscodecom-restorebatch-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i stashappscodecom-restorebatch-editor appscode/stashappscodecom-restorebatch-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RestoreBatch Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `stashappscodecom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-restorebatch-editor appscode/stashappscodecom-restorebatch-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=stash.appscode.com/v1beta1 +$ helm upgrade -i stashappscodecom-restorebatch-editor appscode/stashappscodecom-restorebatch-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=stash.appscode.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-restorebatch-editor appscode/stashappscodecom-restorebatch-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i stashappscodecom-restorebatch-editor appscode/stashappscodecom-restorebatch-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-restoresession-editor-options/Chart.yaml b/charts/stashappscodecom-restoresession-editor-options/Chart.yaml index 0d4b58dbf9..5c0b2b1313 100644 --- a/charts/stashappscodecom-restoresession-editor-options/Chart.yaml +++ b/charts/stashappscodecom-restoresession-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: stashappscodecom-restoresession-editor-options description: Stash RestoreSession Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/stashappscodecom-restoresession-editor-options/README.md b/charts/stashappscodecom-restoresession-editor-options/README.md index e65b22e818..e6f15103a9 100644 --- a/charts/stashappscodecom-restoresession-editor-options/README.md +++ b/charts/stashappscodecom-restoresession-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-restoresession-editor-options --version=v0.38.0 -$ helm upgrade -i stashappscodecom-restoresession-editor-options appscode/stashappscodecom-restoresession-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/stashappscodecom-restoresession-editor-options --version=v0.39.0 +$ helm upgrade -i stashappscodecom-restoresession-editor-options appscode/stashappscodecom-restoresession-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Stash RestoreSession Editor UI Options on a [Kubernetes](ht To install/upgrade the chart with the release name `stashappscodecom-restoresession-editor-options`: ```bash -$ helm upgrade -i stashappscodecom-restoresession-editor-options appscode/stashappscodecom-restoresession-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i stashappscodecom-restoresession-editor-options appscode/stashappscodecom-restoresession-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Stash RestoreSession Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -65,12 +65,12 @@ The following table lists the configurable parameters of the `stashappscodecom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-restoresession-editor-options appscode/stashappscodecom-restoresession-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=stash.appscode.com +$ helm upgrade -i stashappscodecom-restoresession-editor-options appscode/stashappscodecom-restoresession-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=stash.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-restoresession-editor-options appscode/stashappscodecom-restoresession-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i stashappscodecom-restoresession-editor-options appscode/stashappscodecom-restoresession-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-restoresession-editor/Chart.yaml b/charts/stashappscodecom-restoresession-editor/Chart.yaml index 4a296a9cef..d891a72487 100644 --- a/charts/stashappscodecom-restoresession-editor/Chart.yaml +++ b/charts/stashappscodecom-restoresession-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: stash.appscode.com\n kind: RestoreSession\n\ \ version: v1beta1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RestoreSession Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: stashappscodecom-restoresession-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/stashappscodecom-restoresession-editor/README.md b/charts/stashappscodecom-restoresession-editor/README.md index 3a0e3f5a05..793995a77c 100644 --- a/charts/stashappscodecom-restoresession-editor/README.md +++ b/charts/stashappscodecom-restoresession-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-restoresession-editor --version=v0.38.0 -$ helm upgrade -i stashappscodecom-restoresession-editor appscode/stashappscodecom-restoresession-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/stashappscodecom-restoresession-editor --version=v0.39.0 +$ helm upgrade -i stashappscodecom-restoresession-editor appscode/stashappscodecom-restoresession-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RestoreSession Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `stashappscodecom-restoresession-editor`: ```bash -$ helm upgrade -i stashappscodecom-restoresession-editor appscode/stashappscodecom-restoresession-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i stashappscodecom-restoresession-editor appscode/stashappscodecom-restoresession-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RestoreSession Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -60,12 +60,12 @@ The following table lists the configurable parameters of the `stashappscodecom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-restoresession-editor appscode/stashappscodecom-restoresession-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=stash.appscode.com +$ helm upgrade -i stashappscodecom-restoresession-editor appscode/stashappscodecom-restoresession-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=stash.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-restoresession-editor appscode/stashappscodecom-restoresession-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i stashappscodecom-restoresession-editor appscode/stashappscodecom-restoresession-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-task-editor/Chart.yaml b/charts/stashappscodecom-task-editor/Chart.yaml index 0b55c235a3..1b25026e47 100644 --- a/charts/stashappscodecom-task-editor/Chart.yaml +++ b/charts/stashappscodecom-task-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"stash.appscode.com","version":"v1beta1","resource":"tasks"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Task Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: stashappscodecom-task-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/stashappscodecom-task-editor/README.md b/charts/stashappscodecom-task-editor/README.md index 1dba1437a9..4db1f4f2bb 100644 --- a/charts/stashappscodecom-task-editor/README.md +++ b/charts/stashappscodecom-task-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-task-editor --version=v0.38.0 -$ helm upgrade -i stashappscodecom-task-editor appscode/stashappscodecom-task-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/stashappscodecom-task-editor --version=v0.39.0 +$ helm upgrade -i stashappscodecom-task-editor appscode/stashappscodecom-task-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Task Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `stashappscodecom-task-editor`: ```bash -$ helm upgrade -i stashappscodecom-task-editor appscode/stashappscodecom-task-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i stashappscodecom-task-editor appscode/stashappscodecom-task-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Task Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `stashappscodecom-t Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-task-editor appscode/stashappscodecom-task-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=stash.appscode.com/v1beta1 +$ helm upgrade -i stashappscodecom-task-editor appscode/stashappscodecom-task-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=stash.appscode.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-task-editor appscode/stashappscodecom-task-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i stashappscodecom-task-editor appscode/stashappscodecom-task-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/statusgatekeepersh-constraintpodstatus-editor/Chart.yaml b/charts/statusgatekeepersh-constraintpodstatus-editor/Chart.yaml index 0253faab83..d892192919 100644 --- a/charts/statusgatekeepersh-constraintpodstatus-editor/Chart.yaml +++ b/charts/statusgatekeepersh-constraintpodstatus-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"status.gatekeeper.sh","version":"v1beta1","resource":"constraintpodstatuses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ConstraintPodStatus Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: statusgatekeepersh-constraintpodstatus-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/statusgatekeepersh-constraintpodstatus-editor/README.md b/charts/statusgatekeepersh-constraintpodstatus-editor/README.md index 14c4576a8f..3ea2ad3140 100644 --- a/charts/statusgatekeepersh-constraintpodstatus-editor/README.md +++ b/charts/statusgatekeepersh-constraintpodstatus-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/statusgatekeepersh-constraintpodstatus-editor --version=v0.38.0 -$ helm upgrade -i statusgatekeepersh-constraintpodstatus-editor appscode/statusgatekeepersh-constraintpodstatus-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/statusgatekeepersh-constraintpodstatus-editor --version=v0.39.0 +$ helm upgrade -i statusgatekeepersh-constraintpodstatus-editor appscode/statusgatekeepersh-constraintpodstatus-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ConstraintPodStatus Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `statusgatekeepersh-constraintpodstatus-editor`: ```bash -$ helm upgrade -i statusgatekeepersh-constraintpodstatus-editor appscode/statusgatekeepersh-constraintpodstatus-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i statusgatekeepersh-constraintpodstatus-editor appscode/statusgatekeepersh-constraintpodstatus-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ConstraintPodStatus Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `statusgatekeepersh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i statusgatekeepersh-constraintpodstatus-editor appscode/statusgatekeepersh-constraintpodstatus-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=status.gatekeeper.sh/v1beta1 +$ helm upgrade -i statusgatekeepersh-constraintpodstatus-editor appscode/statusgatekeepersh-constraintpodstatus-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=status.gatekeeper.sh/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i statusgatekeepersh-constraintpodstatus-editor appscode/statusgatekeepersh-constraintpodstatus-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i statusgatekeepersh-constraintpodstatus-editor appscode/statusgatekeepersh-constraintpodstatus-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/statusgatekeepersh-constrainttemplatepodstatus-editor/Chart.yaml b/charts/statusgatekeepersh-constrainttemplatepodstatus-editor/Chart.yaml index ff3349debd..445984fa4a 100644 --- a/charts/statusgatekeepersh-constrainttemplatepodstatus-editor/Chart.yaml +++ b/charts/statusgatekeepersh-constrainttemplatepodstatus-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"status.gatekeeper.sh","version":"v1beta1","resource":"constrainttemplatepodstatuses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ConstraintTemplatePodStatus Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: statusgatekeepersh-constrainttemplatepodstatus-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/statusgatekeepersh-constrainttemplatepodstatus-editor/README.md b/charts/statusgatekeepersh-constrainttemplatepodstatus-editor/README.md index d284d7d11a..81f87b121d 100644 --- a/charts/statusgatekeepersh-constrainttemplatepodstatus-editor/README.md +++ b/charts/statusgatekeepersh-constrainttemplatepodstatus-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/statusgatekeepersh-constrainttemplatepodstatus-editor --version=v0.38.0 -$ helm upgrade -i statusgatekeepersh-constrainttemplatepodstatus-editor appscode/statusgatekeepersh-constrainttemplatepodstatus-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/statusgatekeepersh-constrainttemplatepodstatus-editor --version=v0.39.0 +$ helm upgrade -i statusgatekeepersh-constrainttemplatepodstatus-editor appscode/statusgatekeepersh-constrainttemplatepodstatus-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ConstraintTemplatePodStatus Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `statusgatekeepersh-constrainttemplatepodstatus-editor`: ```bash -$ helm upgrade -i statusgatekeepersh-constrainttemplatepodstatus-editor appscode/statusgatekeepersh-constrainttemplatepodstatus-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i statusgatekeepersh-constrainttemplatepodstatus-editor appscode/statusgatekeepersh-constrainttemplatepodstatus-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ConstraintTemplatePodStatus Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `statusgatekeepersh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i statusgatekeepersh-constrainttemplatepodstatus-editor appscode/statusgatekeepersh-constrainttemplatepodstatus-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=status.gatekeeper.sh/v1beta1 +$ helm upgrade -i statusgatekeepersh-constrainttemplatepodstatus-editor appscode/statusgatekeepersh-constrainttemplatepodstatus-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=status.gatekeeper.sh/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i statusgatekeepersh-constrainttemplatepodstatus-editor appscode/statusgatekeepersh-constrainttemplatepodstatus-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i statusgatekeepersh-constrainttemplatepodstatus-editor appscode/statusgatekeepersh-constrainttemplatepodstatus-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/statusgatekeepersh-expansiontemplatepodstatus-editor/Chart.yaml b/charts/statusgatekeepersh-expansiontemplatepodstatus-editor/Chart.yaml index 6caafb32a1..e7dbe5eadb 100644 --- a/charts/statusgatekeepersh-expansiontemplatepodstatus-editor/Chart.yaml +++ b/charts/statusgatekeepersh-expansiontemplatepodstatus-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"status.gatekeeper.sh","version":"v1beta1","resource":"expansiontemplatepodstatuses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ExpansionTemplatePodStatus Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: statusgatekeepersh-expansiontemplatepodstatus-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/statusgatekeepersh-expansiontemplatepodstatus-editor/README.md b/charts/statusgatekeepersh-expansiontemplatepodstatus-editor/README.md index 16307e9ccc..1fcbcf1338 100644 --- a/charts/statusgatekeepersh-expansiontemplatepodstatus-editor/README.md +++ b/charts/statusgatekeepersh-expansiontemplatepodstatus-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/statusgatekeepersh-expansiontemplatepodstatus-editor --version=v0.38.0 -$ helm upgrade -i statusgatekeepersh-expansiontemplatepodstatus-editor appscode/statusgatekeepersh-expansiontemplatepodstatus-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/statusgatekeepersh-expansiontemplatepodstatus-editor --version=v0.39.0 +$ helm upgrade -i statusgatekeepersh-expansiontemplatepodstatus-editor appscode/statusgatekeepersh-expansiontemplatepodstatus-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ExpansionTemplatePodStatus Editor on a [Kubernetes](http:// To install/upgrade the chart with the release name `statusgatekeepersh-expansiontemplatepodstatus-editor`: ```bash -$ helm upgrade -i statusgatekeepersh-expansiontemplatepodstatus-editor appscode/statusgatekeepersh-expansiontemplatepodstatus-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i statusgatekeepersh-expansiontemplatepodstatus-editor appscode/statusgatekeepersh-expansiontemplatepodstatus-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ExpansionTemplatePodStatus Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `statusgatekeepersh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i statusgatekeepersh-expansiontemplatepodstatus-editor appscode/statusgatekeepersh-expansiontemplatepodstatus-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=status.gatekeeper.sh/v1beta1 +$ helm upgrade -i statusgatekeepersh-expansiontemplatepodstatus-editor appscode/statusgatekeepersh-expansiontemplatepodstatus-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=status.gatekeeper.sh/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i statusgatekeepersh-expansiontemplatepodstatus-editor appscode/statusgatekeepersh-expansiontemplatepodstatus-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i statusgatekeepersh-expansiontemplatepodstatus-editor appscode/statusgatekeepersh-expansiontemplatepodstatus-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/statusgatekeepersh-mutatorpodstatus-editor/Chart.yaml b/charts/statusgatekeepersh-mutatorpodstatus-editor/Chart.yaml index c63606c240..361af679f6 100644 --- a/charts/statusgatekeepersh-mutatorpodstatus-editor/Chart.yaml +++ b/charts/statusgatekeepersh-mutatorpodstatus-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"status.gatekeeper.sh","version":"v1beta1","resource":"mutatorpodstatuses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MutatorPodStatus Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: statusgatekeepersh-mutatorpodstatus-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/statusgatekeepersh-mutatorpodstatus-editor/README.md b/charts/statusgatekeepersh-mutatorpodstatus-editor/README.md index 81b4e157a5..8b28aecb90 100644 --- a/charts/statusgatekeepersh-mutatorpodstatus-editor/README.md +++ b/charts/statusgatekeepersh-mutatorpodstatus-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/statusgatekeepersh-mutatorpodstatus-editor --version=v0.38.0 -$ helm upgrade -i statusgatekeepersh-mutatorpodstatus-editor appscode/statusgatekeepersh-mutatorpodstatus-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/statusgatekeepersh-mutatorpodstatus-editor --version=v0.39.0 +$ helm upgrade -i statusgatekeepersh-mutatorpodstatus-editor appscode/statusgatekeepersh-mutatorpodstatus-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MutatorPodStatus Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `statusgatekeepersh-mutatorpodstatus-editor`: ```bash -$ helm upgrade -i statusgatekeepersh-mutatorpodstatus-editor appscode/statusgatekeepersh-mutatorpodstatus-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i statusgatekeepersh-mutatorpodstatus-editor appscode/statusgatekeepersh-mutatorpodstatus-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MutatorPodStatus Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `statusgatekeepersh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i statusgatekeepersh-mutatorpodstatus-editor appscode/statusgatekeepersh-mutatorpodstatus-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=status.gatekeeper.sh/v1beta1 +$ helm upgrade -i statusgatekeepersh-mutatorpodstatus-editor appscode/statusgatekeepersh-mutatorpodstatus-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=status.gatekeeper.sh/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i statusgatekeepersh-mutatorpodstatus-editor appscode/statusgatekeepersh-mutatorpodstatus-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i statusgatekeepersh-mutatorpodstatus-editor appscode/statusgatekeepersh-mutatorpodstatus-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/storageazurekubedbcom-account-editor/Chart.yaml b/charts/storageazurekubedbcom-account-editor/Chart.yaml index 64382ce40e..a0e3913882 100644 --- a/charts/storageazurekubedbcom-account-editor/Chart.yaml +++ b/charts/storageazurekubedbcom-account-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"storage.azure.kubedb.com","version":"v1alpha1","resource":"accounts"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Account Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: storageazurekubedbcom-account-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/storageazurekubedbcom-account-editor/README.md b/charts/storageazurekubedbcom-account-editor/README.md index 5ec5796462..ad89dbeaf3 100644 --- a/charts/storageazurekubedbcom-account-editor/README.md +++ b/charts/storageazurekubedbcom-account-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storageazurekubedbcom-account-editor --version=v0.38.0 -$ helm upgrade -i storageazurekubedbcom-account-editor appscode/storageazurekubedbcom-account-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/storageazurekubedbcom-account-editor --version=v0.39.0 +$ helm upgrade -i storageazurekubedbcom-account-editor appscode/storageazurekubedbcom-account-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Account Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `storageazurekubedbcom-account-editor`: ```bash -$ helm upgrade -i storageazurekubedbcom-account-editor appscode/storageazurekubedbcom-account-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i storageazurekubedbcom-account-editor appscode/storageazurekubedbcom-account-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Account Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `storageazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storageazurekubedbcom-account-editor appscode/storageazurekubedbcom-account-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=storage.azure.kubedb.com/v1alpha1 +$ helm upgrade -i storageazurekubedbcom-account-editor appscode/storageazurekubedbcom-account-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=storage.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storageazurekubedbcom-account-editor appscode/storageazurekubedbcom-account-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i storageazurekubedbcom-account-editor appscode/storageazurekubedbcom-account-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/storageazurekubedbcom-container-editor/Chart.yaml b/charts/storageazurekubedbcom-container-editor/Chart.yaml index 08c81c60bd..02165377e5 100644 --- a/charts/storageazurekubedbcom-container-editor/Chart.yaml +++ b/charts/storageazurekubedbcom-container-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"storage.azure.kubedb.com","version":"v1alpha1","resource":"containers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Container Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: storageazurekubedbcom-container-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/storageazurekubedbcom-container-editor/README.md b/charts/storageazurekubedbcom-container-editor/README.md index 52571b32e7..bb2ddf8760 100644 --- a/charts/storageazurekubedbcom-container-editor/README.md +++ b/charts/storageazurekubedbcom-container-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storageazurekubedbcom-container-editor --version=v0.38.0 -$ helm upgrade -i storageazurekubedbcom-container-editor appscode/storageazurekubedbcom-container-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/storageazurekubedbcom-container-editor --version=v0.39.0 +$ helm upgrade -i storageazurekubedbcom-container-editor appscode/storageazurekubedbcom-container-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Container Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `storageazurekubedbcom-container-editor`: ```bash -$ helm upgrade -i storageazurekubedbcom-container-editor appscode/storageazurekubedbcom-container-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i storageazurekubedbcom-container-editor appscode/storageazurekubedbcom-container-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Container Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `storageazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storageazurekubedbcom-container-editor appscode/storageazurekubedbcom-container-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=storage.azure.kubedb.com/v1alpha1 +$ helm upgrade -i storageazurekubedbcom-container-editor appscode/storageazurekubedbcom-container-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=storage.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storageazurekubedbcom-container-editor appscode/storageazurekubedbcom-container-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i storageazurekubedbcom-container-editor appscode/storageazurekubedbcom-container-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/storagek8sio-csidriver-editor/Chart.yaml b/charts/storagek8sio-csidriver-editor/Chart.yaml index 138eb79dd8..ffb167c7fe 100644 --- a/charts/storagek8sio-csidriver-editor/Chart.yaml +++ b/charts/storagek8sio-csidriver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"storage.k8s.io","version":"v1","resource":"csidrivers"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: CSIDriver Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: storagek8sio-csidriver-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/storagek8sio-csidriver-editor/README.md b/charts/storagek8sio-csidriver-editor/README.md index 7a81ae70c4..bc3e3d1502 100644 --- a/charts/storagek8sio-csidriver-editor/README.md +++ b/charts/storagek8sio-csidriver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagek8sio-csidriver-editor --version=v0.38.0 -$ helm upgrade -i storagek8sio-csidriver-editor appscode/storagek8sio-csidriver-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/storagek8sio-csidriver-editor --version=v0.39.0 +$ helm upgrade -i storagek8sio-csidriver-editor appscode/storagek8sio-csidriver-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CSIDriver Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `storagek8sio-csidriver-editor`: ```bash -$ helm upgrade -i storagek8sio-csidriver-editor appscode/storagek8sio-csidriver-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i storagek8sio-csidriver-editor appscode/storagek8sio-csidriver-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a CSIDriver Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `storagek8sio-csidr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagek8sio-csidriver-editor appscode/storagek8sio-csidriver-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=storage.k8s.io/v1 +$ helm upgrade -i storagek8sio-csidriver-editor appscode/storagek8sio-csidriver-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=storage.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagek8sio-csidriver-editor appscode/storagek8sio-csidriver-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i storagek8sio-csidriver-editor appscode/storagek8sio-csidriver-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/storagek8sio-csinode-editor/Chart.yaml b/charts/storagek8sio-csinode-editor/Chart.yaml index 403be32d90..6815dbb85d 100644 --- a/charts/storagek8sio-csinode-editor/Chart.yaml +++ b/charts/storagek8sio-csinode-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"storage.k8s.io","version":"v1","resource":"csinodes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: CSINode Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: storagek8sio-csinode-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/storagek8sio-csinode-editor/README.md b/charts/storagek8sio-csinode-editor/README.md index 7a99a289eb..e21d228420 100644 --- a/charts/storagek8sio-csinode-editor/README.md +++ b/charts/storagek8sio-csinode-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagek8sio-csinode-editor --version=v0.38.0 -$ helm upgrade -i storagek8sio-csinode-editor appscode/storagek8sio-csinode-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/storagek8sio-csinode-editor --version=v0.39.0 +$ helm upgrade -i storagek8sio-csinode-editor appscode/storagek8sio-csinode-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CSINode Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `storagek8sio-csinode-editor`: ```bash -$ helm upgrade -i storagek8sio-csinode-editor appscode/storagek8sio-csinode-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i storagek8sio-csinode-editor appscode/storagek8sio-csinode-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a CSINode Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `storagek8sio-csino Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagek8sio-csinode-editor appscode/storagek8sio-csinode-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=storage.k8s.io/v1 +$ helm upgrade -i storagek8sio-csinode-editor appscode/storagek8sio-csinode-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=storage.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagek8sio-csinode-editor appscode/storagek8sio-csinode-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i storagek8sio-csinode-editor appscode/storagek8sio-csinode-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/storagek8sio-csistoragecapacity-editor/Chart.yaml b/charts/storagek8sio-csistoragecapacity-editor/Chart.yaml index 17dafef495..7023e8065a 100644 --- a/charts/storagek8sio-csistoragecapacity-editor/Chart.yaml +++ b/charts/storagek8sio-csistoragecapacity-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"storage.k8s.io","version":"v1beta1","resource":"csistoragecapacities"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: CSIStorageCapacity Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: storagek8sio-csistoragecapacity-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/storagek8sio-csistoragecapacity-editor/README.md b/charts/storagek8sio-csistoragecapacity-editor/README.md index b021778e16..a89e0ecf90 100644 --- a/charts/storagek8sio-csistoragecapacity-editor/README.md +++ b/charts/storagek8sio-csistoragecapacity-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagek8sio-csistoragecapacity-editor --version=v0.38.0 -$ helm upgrade -i storagek8sio-csistoragecapacity-editor appscode/storagek8sio-csistoragecapacity-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/storagek8sio-csistoragecapacity-editor --version=v0.39.0 +$ helm upgrade -i storagek8sio-csistoragecapacity-editor appscode/storagek8sio-csistoragecapacity-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CSIStorageCapacity Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `storagek8sio-csistoragecapacity-editor`: ```bash -$ helm upgrade -i storagek8sio-csistoragecapacity-editor appscode/storagek8sio-csistoragecapacity-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i storagek8sio-csistoragecapacity-editor appscode/storagek8sio-csistoragecapacity-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a CSIStorageCapacity Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `storagek8sio-csist Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagek8sio-csistoragecapacity-editor appscode/storagek8sio-csistoragecapacity-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=storage.k8s.io/v1beta1 +$ helm upgrade -i storagek8sio-csistoragecapacity-editor appscode/storagek8sio-csistoragecapacity-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=storage.k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagek8sio-csistoragecapacity-editor appscode/storagek8sio-csistoragecapacity-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i storagek8sio-csistoragecapacity-editor appscode/storagek8sio-csistoragecapacity-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/storagek8sio-storageclass-editor/Chart.yaml b/charts/storagek8sio-storageclass-editor/Chart.yaml index 5418013082..1a3b68714f 100644 --- a/charts/storagek8sio-storageclass-editor/Chart.yaml +++ b/charts/storagek8sio-storageclass-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"storage.k8s.io","version":"v1","resource":"storageclasses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: StorageClass Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: storagek8sio-storageclass-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/storagek8sio-storageclass-editor/README.md b/charts/storagek8sio-storageclass-editor/README.md index 3ef7c972d5..314e3120d7 100644 --- a/charts/storagek8sio-storageclass-editor/README.md +++ b/charts/storagek8sio-storageclass-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagek8sio-storageclass-editor --version=v0.38.0 -$ helm upgrade -i storagek8sio-storageclass-editor appscode/storagek8sio-storageclass-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/storagek8sio-storageclass-editor --version=v0.39.0 +$ helm upgrade -i storagek8sio-storageclass-editor appscode/storagek8sio-storageclass-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a StorageClass Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `storagek8sio-storageclass-editor`: ```bash -$ helm upgrade -i storagek8sio-storageclass-editor appscode/storagek8sio-storageclass-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i storagek8sio-storageclass-editor appscode/storagek8sio-storageclass-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a StorageClass Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `storagek8sio-stora Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagek8sio-storageclass-editor appscode/storagek8sio-storageclass-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=storage.k8s.io/v1 +$ helm upgrade -i storagek8sio-storageclass-editor appscode/storagek8sio-storageclass-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=storage.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagek8sio-storageclass-editor appscode/storagek8sio-storageclass-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i storagek8sio-storageclass-editor appscode/storagek8sio-storageclass-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/storagek8sio-volumeattachment-editor/Chart.yaml b/charts/storagek8sio-volumeattachment-editor/Chart.yaml index 8113c0cfff..44ab13e899 100644 --- a/charts/storagek8sio-volumeattachment-editor/Chart.yaml +++ b/charts/storagek8sio-volumeattachment-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"storage.k8s.io","version":"v1","resource":"volumeattachments"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: VolumeAttachment Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: storagek8sio-volumeattachment-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/storagek8sio-volumeattachment-editor/README.md b/charts/storagek8sio-volumeattachment-editor/README.md index 26d41b4834..d0925ea1f9 100644 --- a/charts/storagek8sio-volumeattachment-editor/README.md +++ b/charts/storagek8sio-volumeattachment-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagek8sio-volumeattachment-editor --version=v0.38.0 -$ helm upgrade -i storagek8sio-volumeattachment-editor appscode/storagek8sio-volumeattachment-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/storagek8sio-volumeattachment-editor --version=v0.39.0 +$ helm upgrade -i storagek8sio-volumeattachment-editor appscode/storagek8sio-volumeattachment-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VolumeAttachment Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `storagek8sio-volumeattachment-editor`: ```bash -$ helm upgrade -i storagek8sio-volumeattachment-editor appscode/storagek8sio-volumeattachment-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i storagek8sio-volumeattachment-editor appscode/storagek8sio-volumeattachment-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a VolumeAttachment Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `storagek8sio-volum Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagek8sio-volumeattachment-editor appscode/storagek8sio-volumeattachment-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=storage.k8s.io/v1 +$ helm upgrade -i storagek8sio-volumeattachment-editor appscode/storagek8sio-volumeattachment-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=storage.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagek8sio-volumeattachment-editor appscode/storagek8sio-volumeattachment-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i storagek8sio-volumeattachment-editor appscode/storagek8sio-volumeattachment-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/storagekubestashcom-backupstorage-editor-options/Chart.yaml b/charts/storagekubestashcom-backupstorage-editor-options/Chart.yaml index 568fb115e7..3c1451c4a1 100644 --- a/charts/storagekubestashcom-backupstorage-editor-options/Chart.yaml +++ b/charts/storagekubestashcom-backupstorage-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: storagekubestashcom-backupstorage-editor-options description: Stash Repository Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/storagekubestashcom-backupstorage-editor-options/README.md b/charts/storagekubestashcom-backupstorage-editor-options/README.md index 43228974b0..fdf40a97b8 100644 --- a/charts/storagekubestashcom-backupstorage-editor-options/README.md +++ b/charts/storagekubestashcom-backupstorage-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagekubestashcom-backupstorage-editor-options --version=v0.38.0 -$ helm upgrade -i storagekubestashcom-backupstorage-editor-options appscode/storagekubestashcom-backupstorage-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/storagekubestashcom-backupstorage-editor-options --version=v0.39.0 +$ helm upgrade -i storagekubestashcom-backupstorage-editor-options appscode/storagekubestashcom-backupstorage-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Stash Repository Editor UI Options on a [Kubernetes](http:/ To install/upgrade the chart with the release name `storagekubestashcom-backupstorage-editor-options`: ```bash -$ helm upgrade -i storagekubestashcom-backupstorage-editor-options appscode/storagekubestashcom-backupstorage-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i storagekubestashcom-backupstorage-editor-options appscode/storagekubestashcom-backupstorage-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Stash Repository Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -76,12 +76,12 @@ The following table lists the configurable parameters of the `storagekubestashco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagekubestashcom-backupstorage-editor-options appscode/storagekubestashcom-backupstorage-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=storage.kubestash.com +$ helm upgrade -i storagekubestashcom-backupstorage-editor-options appscode/storagekubestashcom-backupstorage-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=storage.kubestash.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagekubestashcom-backupstorage-editor-options appscode/storagekubestashcom-backupstorage-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i storagekubestashcom-backupstorage-editor-options appscode/storagekubestashcom-backupstorage-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/storagekubestashcom-backupstorage-editor/Chart.yaml b/charts/storagekubestashcom-backupstorage-editor/Chart.yaml index 6079fb79c3..874b632879 100644 --- a/charts/storagekubestashcom-backupstorage-editor/Chart.yaml +++ b/charts/storagekubestashcom-backupstorage-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ \ storage.kubestash.com\n kind: BackupStorage\n version: v1alpha1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: BackupStorage Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: storagekubestashcom-backupstorage-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/storagekubestashcom-backupstorage-editor/README.md b/charts/storagekubestashcom-backupstorage-editor/README.md index 8cffe35a8b..8bdd15359c 100644 --- a/charts/storagekubestashcom-backupstorage-editor/README.md +++ b/charts/storagekubestashcom-backupstorage-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagekubestashcom-backupstorage-editor --version=v0.38.0 -$ helm upgrade -i storagekubestashcom-backupstorage-editor appscode/storagekubestashcom-backupstorage-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/storagekubestashcom-backupstorage-editor --version=v0.39.0 +$ helm upgrade -i storagekubestashcom-backupstorage-editor appscode/storagekubestashcom-backupstorage-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupStorage Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `storagekubestashcom-backupstorage-editor`: ```bash -$ helm upgrade -i storagekubestashcom-backupstorage-editor appscode/storagekubestashcom-backupstorage-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i storagekubestashcom-backupstorage-editor appscode/storagekubestashcom-backupstorage-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a BackupStorage Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -61,12 +61,12 @@ The following table lists the configurable parameters of the `storagekubestashco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagekubestashcom-backupstorage-editor appscode/storagekubestashcom-backupstorage-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=storage.kubestash.com +$ helm upgrade -i storagekubestashcom-backupstorage-editor appscode/storagekubestashcom-backupstorage-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=storage.kubestash.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagekubestashcom-backupstorage-editor appscode/storagekubestashcom-backupstorage-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i storagekubestashcom-backupstorage-editor appscode/storagekubestashcom-backupstorage-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/storagekubestashcom-repository-editor-options/Chart.yaml b/charts/storagekubestashcom-repository-editor-options/Chart.yaml index 5e96e0325a..4641581bba 100644 --- a/charts/storagekubestashcom-repository-editor-options/Chart.yaml +++ b/charts/storagekubestashcom-repository-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: storagekubestashcom-repository-editor-options description: Stash Repository Editor UI Options type: application -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/storagekubestashcom-repository-editor-options/README.md b/charts/storagekubestashcom-repository-editor-options/README.md index f38295d4fa..306198ff52 100644 --- a/charts/storagekubestashcom-repository-editor-options/README.md +++ b/charts/storagekubestashcom-repository-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagekubestashcom-repository-editor-options --version=v0.38.0 -$ helm upgrade -i storagekubestashcom-repository-editor-options appscode/storagekubestashcom-repository-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm search repo appscode/storagekubestashcom-repository-editor-options --version=v0.39.0 +$ helm upgrade -i storagekubestashcom-repository-editor-options appscode/storagekubestashcom-repository-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Stash Repository Editor UI Options on a [Kubernetes](http:/ To install/upgrade the chart with the release name `storagekubestashcom-repository-editor-options`: ```bash -$ helm upgrade -i storagekubestashcom-repository-editor-options appscode/storagekubestashcom-repository-editor-options -n kube-system --create-namespace --version=v0.38.0 +$ helm upgrade -i storagekubestashcom-repository-editor-options appscode/storagekubestashcom-repository-editor-options -n kube-system --create-namespace --version=v0.39.0 ``` The command deploys a Stash Repository Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -71,12 +71,12 @@ The following table lists the configurable parameters of the `storagekubestashco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagekubestashcom-repository-editor-options appscode/storagekubestashcom-repository-editor-options -n kube-system --create-namespace --version=v0.38.0 --set metadata.resource.group=storage.kubestash.com +$ helm upgrade -i storagekubestashcom-repository-editor-options appscode/storagekubestashcom-repository-editor-options -n kube-system --create-namespace --version=v0.39.0 --set metadata.resource.group=storage.kubestash.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagekubestashcom-repository-editor-options appscode/storagekubestashcom-repository-editor-options -n kube-system --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i storagekubestashcom-repository-editor-options appscode/storagekubestashcom-repository-editor-options -n kube-system --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/storagekubestashcom-repository-editor/Chart.yaml b/charts/storagekubestashcom-repository-editor/Chart.yaml index 2f481db9b5..a989bdbc2d 100644 --- a/charts/storagekubestashcom-repository-editor/Chart.yaml +++ b/charts/storagekubestashcom-repository-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: storage.kubestash.com\n kind: Repository\n\ \ version: v1alpha1\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Repository Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: storagekubestashcom-repository-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/storagekubestashcom-repository-editor/README.md b/charts/storagekubestashcom-repository-editor/README.md index 805467ae11..01c84b177d 100644 --- a/charts/storagekubestashcom-repository-editor/README.md +++ b/charts/storagekubestashcom-repository-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagekubestashcom-repository-editor --version=v0.38.0 -$ helm upgrade -i storagekubestashcom-repository-editor appscode/storagekubestashcom-repository-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/storagekubestashcom-repository-editor --version=v0.39.0 +$ helm upgrade -i storagekubestashcom-repository-editor appscode/storagekubestashcom-repository-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Repository Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `storagekubestashcom-repository-editor`: ```bash -$ helm upgrade -i storagekubestashcom-repository-editor appscode/storagekubestashcom-repository-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i storagekubestashcom-repository-editor appscode/storagekubestashcom-repository-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Repository Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -60,12 +60,12 @@ The following table lists the configurable parameters of the `storagekubestashco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagekubestashcom-repository-editor appscode/storagekubestashcom-repository-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=storage.kubestash.com +$ helm upgrade -i storagekubestashcom-repository-editor appscode/storagekubestashcom-repository-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=storage.kubestash.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagekubestashcom-repository-editor appscode/storagekubestashcom-repository-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i storagekubestashcom-repository-editor appscode/storagekubestashcom-repository-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/storagekubestashcom-retentionpolicy-editor/Chart.yaml b/charts/storagekubestashcom-retentionpolicy-editor/Chart.yaml index 89ce1c7dae..8c1846fb53 100644 --- a/charts/storagekubestashcom-retentionpolicy-editor/Chart.yaml +++ b/charts/storagekubestashcom-retentionpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"storage.kubestash.com","version":"v1alpha1","resource":"retentionpolicies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RetentionPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: storagekubestashcom-retentionpolicy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/storagekubestashcom-retentionpolicy-editor/README.md b/charts/storagekubestashcom-retentionpolicy-editor/README.md index 80ba7af73f..cfe1044889 100644 --- a/charts/storagekubestashcom-retentionpolicy-editor/README.md +++ b/charts/storagekubestashcom-retentionpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagekubestashcom-retentionpolicy-editor --version=v0.38.0 -$ helm upgrade -i storagekubestashcom-retentionpolicy-editor appscode/storagekubestashcom-retentionpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/storagekubestashcom-retentionpolicy-editor --version=v0.39.0 +$ helm upgrade -i storagekubestashcom-retentionpolicy-editor appscode/storagekubestashcom-retentionpolicy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RetentionPolicy Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `storagekubestashcom-retentionpolicy-editor`: ```bash -$ helm upgrade -i storagekubestashcom-retentionpolicy-editor appscode/storagekubestashcom-retentionpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i storagekubestashcom-retentionpolicy-editor appscode/storagekubestashcom-retentionpolicy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RetentionPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `storagekubestashco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagekubestashcom-retentionpolicy-editor appscode/storagekubestashcom-retentionpolicy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=storage.kubestash.com/v1alpha1 +$ helm upgrade -i storagekubestashcom-retentionpolicy-editor appscode/storagekubestashcom-retentionpolicy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=storage.kubestash.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagekubestashcom-retentionpolicy-editor appscode/storagekubestashcom-retentionpolicy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i storagekubestashcom-retentionpolicy-editor appscode/storagekubestashcom-retentionpolicy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/storagekubestashcom-snapshot-editor/Chart.yaml b/charts/storagekubestashcom-snapshot-editor/Chart.yaml index cd0a7ef7e0..a6024d38b5 100644 --- a/charts/storagekubestashcom-snapshot-editor/Chart.yaml +++ b/charts/storagekubestashcom-snapshot-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"storage.kubestash.com","version":"v1alpha1","resource":"snapshots"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Snapshot Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: storagekubestashcom-snapshot-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/storagekubestashcom-snapshot-editor/README.md b/charts/storagekubestashcom-snapshot-editor/README.md index f0c05819ca..f268399ecc 100644 --- a/charts/storagekubestashcom-snapshot-editor/README.md +++ b/charts/storagekubestashcom-snapshot-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagekubestashcom-snapshot-editor --version=v0.38.0 -$ helm upgrade -i storagekubestashcom-snapshot-editor appscode/storagekubestashcom-snapshot-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/storagekubestashcom-snapshot-editor --version=v0.39.0 +$ helm upgrade -i storagekubestashcom-snapshot-editor appscode/storagekubestashcom-snapshot-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Snapshot Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `storagekubestashcom-snapshot-editor`: ```bash -$ helm upgrade -i storagekubestashcom-snapshot-editor appscode/storagekubestashcom-snapshot-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i storagekubestashcom-snapshot-editor appscode/storagekubestashcom-snapshot-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Snapshot Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `storagekubestashco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagekubestashcom-snapshot-editor appscode/storagekubestashcom-snapshot-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=storage.kubestash.com/v1alpha1 +$ helm upgrade -i storagekubestashcom-snapshot-editor appscode/storagekubestashcom-snapshot-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=storage.kubestash.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagekubestashcom-snapshot-editor appscode/storagekubestashcom-snapshot-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i storagekubestashcom-snapshot-editor appscode/storagekubestashcom-snapshot-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/supervisorappscodecom-approvalpolicy-editor/Chart.yaml b/charts/supervisorappscodecom-approvalpolicy-editor/Chart.yaml index 13c193a5e4..525464a740 100644 --- a/charts/supervisorappscodecom-approvalpolicy-editor/Chart.yaml +++ b/charts/supervisorappscodecom-approvalpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"supervisor.appscode.com","version":"v1alpha1","resource":"approvalpolicies"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ApprovalPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: supervisorappscodecom-approvalpolicy-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/supervisorappscodecom-approvalpolicy-editor/README.md b/charts/supervisorappscodecom-approvalpolicy-editor/README.md index 5f515cea9d..2adc89b26e 100644 --- a/charts/supervisorappscodecom-approvalpolicy-editor/README.md +++ b/charts/supervisorappscodecom-approvalpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/supervisorappscodecom-approvalpolicy-editor --version=v0.38.0 -$ helm upgrade -i supervisorappscodecom-approvalpolicy-editor appscode/supervisorappscodecom-approvalpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/supervisorappscodecom-approvalpolicy-editor --version=v0.39.0 +$ helm upgrade -i supervisorappscodecom-approvalpolicy-editor appscode/supervisorappscodecom-approvalpolicy-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ApprovalPolicy Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `supervisorappscodecom-approvalpolicy-editor`: ```bash -$ helm upgrade -i supervisorappscodecom-approvalpolicy-editor appscode/supervisorappscodecom-approvalpolicy-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i supervisorappscodecom-approvalpolicy-editor appscode/supervisorappscodecom-approvalpolicy-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ApprovalPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `supervisorappscode Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i supervisorappscodecom-approvalpolicy-editor appscode/supervisorappscodecom-approvalpolicy-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=supervisor.appscode.com/v1alpha1 +$ helm upgrade -i supervisorappscodecom-approvalpolicy-editor appscode/supervisorappscodecom-approvalpolicy-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=supervisor.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i supervisorappscodecom-approvalpolicy-editor appscode/supervisorappscodecom-approvalpolicy-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i supervisorappscodecom-approvalpolicy-editor appscode/supervisorappscodecom-approvalpolicy-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/supervisorappscodecom-clustermaintenancewindow-editor/Chart.yaml b/charts/supervisorappscodecom-clustermaintenancewindow-editor/Chart.yaml index 2a109bb2c7..265addadcd 100644 --- a/charts/supervisorappscodecom-clustermaintenancewindow-editor/Chart.yaml +++ b/charts/supervisorappscodecom-clustermaintenancewindow-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"supervisor.appscode.com","version":"v1alpha1","resource":"clustermaintenancewindows"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterMaintenanceWindow Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: supervisorappscodecom-clustermaintenancewindow-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/supervisorappscodecom-clustermaintenancewindow-editor/README.md b/charts/supervisorappscodecom-clustermaintenancewindow-editor/README.md index fa3ae6cd5d..5fc5db3a62 100644 --- a/charts/supervisorappscodecom-clustermaintenancewindow-editor/README.md +++ b/charts/supervisorappscodecom-clustermaintenancewindow-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/supervisorappscodecom-clustermaintenancewindow-editor --version=v0.38.0 -$ helm upgrade -i supervisorappscodecom-clustermaintenancewindow-editor appscode/supervisorappscodecom-clustermaintenancewindow-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/supervisorappscodecom-clustermaintenancewindow-editor --version=v0.39.0 +$ helm upgrade -i supervisorappscodecom-clustermaintenancewindow-editor appscode/supervisorappscodecom-clustermaintenancewindow-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterMaintenanceWindow Editor on a [Kubernetes](http://ku To install/upgrade the chart with the release name `supervisorappscodecom-clustermaintenancewindow-editor`: ```bash -$ helm upgrade -i supervisorappscodecom-clustermaintenancewindow-editor appscode/supervisorappscodecom-clustermaintenancewindow-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i supervisorappscodecom-clustermaintenancewindow-editor appscode/supervisorappscodecom-clustermaintenancewindow-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterMaintenanceWindow Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `supervisorappscode Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i supervisorappscodecom-clustermaintenancewindow-editor appscode/supervisorappscodecom-clustermaintenancewindow-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=supervisor.appscode.com/v1alpha1 +$ helm upgrade -i supervisorappscodecom-clustermaintenancewindow-editor appscode/supervisorappscodecom-clustermaintenancewindow-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=supervisor.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i supervisorappscodecom-clustermaintenancewindow-editor appscode/supervisorappscodecom-clustermaintenancewindow-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i supervisorappscodecom-clustermaintenancewindow-editor appscode/supervisorappscodecom-clustermaintenancewindow-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/supervisorappscodecom-maintenancewindow-editor/Chart.yaml b/charts/supervisorappscodecom-maintenancewindow-editor/Chart.yaml index 68a0dfd323..ff77e690f0 100644 --- a/charts/supervisorappscodecom-maintenancewindow-editor/Chart.yaml +++ b/charts/supervisorappscodecom-maintenancewindow-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"supervisor.appscode.com","version":"v1alpha1","resource":"maintenancewindows"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MaintenanceWindow Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: supervisorappscodecom-maintenancewindow-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/supervisorappscodecom-maintenancewindow-editor/README.md b/charts/supervisorappscodecom-maintenancewindow-editor/README.md index 62e16103c2..b3a719e02d 100644 --- a/charts/supervisorappscodecom-maintenancewindow-editor/README.md +++ b/charts/supervisorappscodecom-maintenancewindow-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/supervisorappscodecom-maintenancewindow-editor --version=v0.38.0 -$ helm upgrade -i supervisorappscodecom-maintenancewindow-editor appscode/supervisorappscodecom-maintenancewindow-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/supervisorappscodecom-maintenancewindow-editor --version=v0.39.0 +$ helm upgrade -i supervisorappscodecom-maintenancewindow-editor appscode/supervisorappscodecom-maintenancewindow-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MaintenanceWindow Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `supervisorappscodecom-maintenancewindow-editor`: ```bash -$ helm upgrade -i supervisorappscodecom-maintenancewindow-editor appscode/supervisorappscodecom-maintenancewindow-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i supervisorappscodecom-maintenancewindow-editor appscode/supervisorappscodecom-maintenancewindow-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MaintenanceWindow Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `supervisorappscode Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i supervisorappscodecom-maintenancewindow-editor appscode/supervisorappscodecom-maintenancewindow-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=supervisor.appscode.com/v1alpha1 +$ helm upgrade -i supervisorappscodecom-maintenancewindow-editor appscode/supervisorappscodecom-maintenancewindow-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=supervisor.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i supervisorappscodecom-maintenancewindow-editor appscode/supervisorappscodecom-maintenancewindow-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i supervisorappscodecom-maintenancewindow-editor appscode/supervisorappscodecom-maintenancewindow-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/supervisorappscodecom-recommendation-editor/Chart.yaml b/charts/supervisorappscodecom-recommendation-editor/Chart.yaml index 73d6a483b5..0c270b54f1 100644 --- a/charts/supervisorappscodecom-recommendation-editor/Chart.yaml +++ b/charts/supervisorappscodecom-recommendation-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"supervisor.appscode.com","version":"v1alpha1","resource":"recommendations"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Recommendation Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: supervisorappscodecom-recommendation-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/supervisorappscodecom-recommendation-editor/README.md b/charts/supervisorappscodecom-recommendation-editor/README.md index 7869fb9282..9b99dec61a 100644 --- a/charts/supervisorappscodecom-recommendation-editor/README.md +++ b/charts/supervisorappscodecom-recommendation-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/supervisorappscodecom-recommendation-editor --version=v0.38.0 -$ helm upgrade -i supervisorappscodecom-recommendation-editor appscode/supervisorappscodecom-recommendation-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/supervisorappscodecom-recommendation-editor --version=v0.39.0 +$ helm upgrade -i supervisorappscodecom-recommendation-editor appscode/supervisorappscodecom-recommendation-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Recommendation Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `supervisorappscodecom-recommendation-editor`: ```bash -$ helm upgrade -i supervisorappscodecom-recommendation-editor appscode/supervisorappscodecom-recommendation-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i supervisorappscodecom-recommendation-editor appscode/supervisorappscodecom-recommendation-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Recommendation Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `supervisorappscode Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i supervisorappscodecom-recommendation-editor appscode/supervisorappscodecom-recommendation-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=supervisor.appscode.com/v1alpha1 +$ helm upgrade -i supervisorappscodecom-recommendation-editor appscode/supervisorappscodecom-recommendation-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=supervisor.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i supervisorappscodecom-recommendation-editor appscode/supervisorappscodecom-recommendation-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i supervisorappscodecom-recommendation-editor appscode/supervisorappscodecom-recommendation-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uibytebuildersdev-component-alert/Chart.yaml b/charts/uibytebuildersdev-component-alert/Chart.yaml index 9506d1c5ad..ff488f1e9f 100644 --- a/charts/uibytebuildersdev-component-alert/Chart.yaml +++ b/charts/uibytebuildersdev-component-alert/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-alert description: Alert Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uibytebuildersdev-component-backup-option/Chart.yaml b/charts/uibytebuildersdev-component-backup-option/Chart.yaml index 8f5b3ee812..4089943cb7 100644 --- a/charts/uibytebuildersdev-component-backup-option/Chart.yaml +++ b/charts/uibytebuildersdev-component-backup-option/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-backup-option description: Backup Option Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uibytebuildersdev-component-backupconfiguration/Chart.yaml b/charts/uibytebuildersdev-component-backupconfiguration/Chart.yaml index 7f65ec02cf..360481ed8d 100644 --- a/charts/uibytebuildersdev-component-backupconfiguration/Chart.yaml +++ b/charts/uibytebuildersdev-component-backupconfiguration/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-backupconfiguration description: BackupConfiguration Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uibytebuildersdev-component-certificates/Chart.yaml b/charts/uibytebuildersdev-component-certificates/Chart.yaml index 8a19d6591f..197564347b 100644 --- a/charts/uibytebuildersdev-component-certificates/Chart.yaml +++ b/charts/uibytebuildersdev-component-certificates/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-certificates description: Certificates Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uibytebuildersdev-component-data-sources-items/Chart.yaml b/charts/uibytebuildersdev-component-data-sources-items/Chart.yaml index 39cc7dd91c..1bf86bfafa 100644 --- a/charts/uibytebuildersdev-component-data-sources-items/Chart.yaml +++ b/charts/uibytebuildersdev-component-data-sources-items/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-data-sources-items description: Data Source Items Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uibytebuildersdev-component-database-runtime-settings/Chart.yaml b/charts/uibytebuildersdev-component-database-runtime-settings/Chart.yaml index de7d3b62da..03fe13c5e4 100644 --- a/charts/uibytebuildersdev-component-database-runtime-settings/Chart.yaml +++ b/charts/uibytebuildersdev-component-database-runtime-settings/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-database-runtime-settings description: DatabaseRuntimeSettings Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uibytebuildersdev-component-env-from/Chart.yaml b/charts/uibytebuildersdev-component-env-from/Chart.yaml index c0e2cadb92..8bb10a371e 100644 --- a/charts/uibytebuildersdev-component-env-from/Chart.yaml +++ b/charts/uibytebuildersdev-component-env-from/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-env-from description: EnvFrom Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uibytebuildersdev-component-env/Chart.yaml b/charts/uibytebuildersdev-component-env/Chart.yaml index eb5dc2ef20..9d2bcbddf4 100644 --- a/charts/uibytebuildersdev-component-env/Chart.yaml +++ b/charts/uibytebuildersdev-component-env/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-env description: Env Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uibytebuildersdev-component-health-checker/Chart.yaml b/charts/uibytebuildersdev-component-health-checker/Chart.yaml index bbb3170e3a..cb36d0b9ca 100644 --- a/charts/uibytebuildersdev-component-health-checker/Chart.yaml +++ b/charts/uibytebuildersdev-component-health-checker/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-health-checker description: Health Checker Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uibytebuildersdev-component-initialization/Chart.yaml b/charts/uibytebuildersdev-component-initialization/Chart.yaml index fb0d54b1bd..4183189ae2 100644 --- a/charts/uibytebuildersdev-component-initialization/Chart.yaml +++ b/charts/uibytebuildersdev-component-initialization/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-initialization description: Initialization Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uibytebuildersdev-component-jwtoidc-config/Chart.yaml b/charts/uibytebuildersdev-component-jwtoidc-config/Chart.yaml index fdbf3e8ee2..e0a49851e5 100644 --- a/charts/uibytebuildersdev-component-jwtoidc-config/Chart.yaml +++ b/charts/uibytebuildersdev-component-jwtoidc-config/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-jwtoidc-config description: JwtOidc Config Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uibytebuildersdev-component-kubedb-ui-presets/Chart.yaml b/charts/uibytebuildersdev-component-kubedb-ui-presets/Chart.yaml index 70eaa6e42b..81243c3d56 100644 --- a/charts/uibytebuildersdev-component-kubedb-ui-presets/Chart.yaml +++ b/charts/uibytebuildersdev-component-kubedb-ui-presets/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: uibytebuildersdev-component-kubedb-ui-presets description: kubedb-ui preset reusable preset chart type: library -version: v0.38.0 -appVersion: v0.38.0 +version: v0.39.0 +appVersion: v0.39.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/uibytebuildersdev-component-match-expressions/Chart.yaml b/charts/uibytebuildersdev-component-match-expressions/Chart.yaml index 13ff71cb20..af3b73ae45 100644 --- a/charts/uibytebuildersdev-component-match-expressions/Chart.yaml +++ b/charts/uibytebuildersdev-component-match-expressions/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-match-expressions description: MatchExpressions Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uibytebuildersdev-component-match-fields/Chart.yaml b/charts/uibytebuildersdev-component-match-fields/Chart.yaml index 0c5088840b..af32162595 100644 --- a/charts/uibytebuildersdev-component-match-fields/Chart.yaml +++ b/charts/uibytebuildersdev-component-match-fields/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-match-fields description: MatchFields Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uibytebuildersdev-component-monitoring-option/Chart.yaml b/charts/uibytebuildersdev-component-monitoring-option/Chart.yaml index 9363f2f82a..b7f913ae86 100644 --- a/charts/uibytebuildersdev-component-monitoring-option/Chart.yaml +++ b/charts/uibytebuildersdev-component-monitoring-option/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-monitoring-option description: Monitoring Option Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uibytebuildersdev-component-pod-template/Chart.yaml b/charts/uibytebuildersdev-component-pod-template/Chart.yaml index e05e1e5052..578b06d2d5 100644 --- a/charts/uibytebuildersdev-component-pod-template/Chart.yaml +++ b/charts/uibytebuildersdev-component-pod-template/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-pod-template description: PodTemplate Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uibytebuildersdev-component-repository-create/Chart.yaml b/charts/uibytebuildersdev-component-repository-create/Chart.yaml index 28394a113c..b1baf4e062 100644 --- a/charts/uibytebuildersdev-component-repository-create/Chart.yaml +++ b/charts/uibytebuildersdev-component-repository-create/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-repository-create description: RepositoryCreate Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uibytebuildersdev-component-resources/Chart.yaml b/charts/uibytebuildersdev-component-resources/Chart.yaml index d2618d44e5..225244b5ef 100644 --- a/charts/uibytebuildersdev-component-resources/Chart.yaml +++ b/charts/uibytebuildersdev-component-resources/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-resources description: Resources Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uibytebuildersdev-component-runtime-settings/Chart.yaml b/charts/uibytebuildersdev-component-runtime-settings/Chart.yaml index 7a6b0ea182..193074dcec 100644 --- a/charts/uibytebuildersdev-component-runtime-settings/Chart.yaml +++ b/charts/uibytebuildersdev-component-runtime-settings/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-runtime-settings description: RuntimeSettings Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uibytebuildersdev-component-se-linux-options/Chart.yaml b/charts/uibytebuildersdev-component-se-linux-options/Chart.yaml index e5e2901531..42934175c2 100644 --- a/charts/uibytebuildersdev-component-se-linux-options/Chart.yaml +++ b/charts/uibytebuildersdev-component-se-linux-options/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-se-linux-options description: SELinuxOptions Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uibytebuildersdev-component-selector/Chart.yaml b/charts/uibytebuildersdev-component-selector/Chart.yaml index 9b6d77e4c4..3be13e4f27 100644 --- a/charts/uibytebuildersdev-component-selector/Chart.yaml +++ b/charts/uibytebuildersdev-component-selector/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-selector description: Selector Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uibytebuildersdev-component-service-templates/Chart.yaml b/charts/uibytebuildersdev-component-service-templates/Chart.yaml index 1fab90c476..bfa7286261 100644 --- a/charts/uibytebuildersdev-component-service-templates/Chart.yaml +++ b/charts/uibytebuildersdev-component-service-templates/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-service-templates description: Service Templates Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uibytebuildersdev-component-stash-presets/Chart.yaml b/charts/uibytebuildersdev-component-stash-presets/Chart.yaml index d1ddee9bc1..fd1033dc69 100644 --- a/charts/uibytebuildersdev-component-stash-presets/Chart.yaml +++ b/charts/uibytebuildersdev-component-stash-presets/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-stash-presets description: Backup Option Component Library type: library -appVersion: v0.38.0 +appVersion: v0.39.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-clusterprofile-editor/Chart.yaml b/charts/uik8sappscodecom-clusterprofile-editor/Chart.yaml index b3b4b7a3f6..0fae9ef89c 100644 --- a/charts/uik8sappscodecom-clusterprofile-editor/Chart.yaml +++ b/charts/uik8sappscodecom-clusterprofile-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.k8s.appscode.com","version":"v1alpha1","resource":"clusterprofiles"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ClusterProfile Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uik8sappscodecom-clusterprofile-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-clusterprofile-editor/README.md b/charts/uik8sappscodecom-clusterprofile-editor/README.md index 7037149113..d8419a6a39 100644 --- a/charts/uik8sappscodecom-clusterprofile-editor/README.md +++ b/charts/uik8sappscodecom-clusterprofile-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-clusterprofile-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-clusterprofile-editor appscode/uik8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-clusterprofile-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-clusterprofile-editor appscode/uik8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterProfile Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `uik8sappscodecom-clusterprofile-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-clusterprofile-editor appscode/uik8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-clusterprofile-editor appscode/uik8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ClusterProfile Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-c Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-clusterprofile-editor appscode/uik8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.k8s.appscode.com/v1alpha1 +$ helm upgrade -i uik8sappscodecom-clusterprofile-editor appscode/uik8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-clusterprofile-editor appscode/uik8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-clusterprofile-editor appscode/uik8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-capi-capa-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-capi-capa-editor/Chart.yaml index 7ed6434c10..8c4057f3f1 100644 --- a/charts/uik8sappscodecom-featureset-capi-capa-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-capi-capa-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-capi-capa-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-featureset-capi-capa-editor/README.md b/charts/uik8sappscodecom-featureset-capi-capa-editor/README.md index d9ca7979af..cc9627f5d3 100644 --- a/charts/uik8sappscodecom-featureset-capi-capa-editor/README.md +++ b/charts/uik8sappscodecom-featureset-capi-capa-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-capi-capa-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-featureset-capi-capa-editor appscode/uik8sappscodecom-featureset-capi-capa-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-featureset-capi-capa-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-featureset-capi-capa-editor appscode/uik8sappscodecom-featureset-capi-capa-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-capi-capa-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-capa-editor appscode/uik8sappscodecom-featureset-capi-capa-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-featureset-capi-capa-editor appscode/uik8sappscodecom-featureset-capi-capa-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -64,12 +64,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-capa-editor appscode/uik8sappscodecom-featureset-capi-capa-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-capi-capa-editor appscode/uik8sappscodecom-featureset-capi-capa-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-capa-editor appscode/uik8sappscodecom-featureset-capi-capa-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-capi-capa-editor appscode/uik8sappscodecom-featureset-capi-capa-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-capi-capg-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-capi-capg-editor/Chart.yaml index a24ed1e706..1c13dc6b3b 100644 --- a/charts/uik8sappscodecom-featureset-capi-capg-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-capi-capg-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-capi-capg-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-featureset-capi-capg-editor/README.md b/charts/uik8sappscodecom-featureset-capi-capg-editor/README.md index b329744279..4377a34065 100644 --- a/charts/uik8sappscodecom-featureset-capi-capg-editor/README.md +++ b/charts/uik8sappscodecom-featureset-capi-capg-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-capi-capg-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-featureset-capi-capg-editor appscode/uik8sappscodecom-featureset-capi-capg-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-featureset-capi-capg-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-featureset-capi-capg-editor appscode/uik8sappscodecom-featureset-capi-capg-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-capi-capg-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-capg-editor appscode/uik8sappscodecom-featureset-capi-capg-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-featureset-capi-capg-editor appscode/uik8sappscodecom-featureset-capi-capg-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -60,12 +60,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-capg-editor appscode/uik8sappscodecom-featureset-capi-capg-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-capi-capg-editor appscode/uik8sappscodecom-featureset-capi-capg-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-capg-editor appscode/uik8sappscodecom-featureset-capi-capg-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-capi-capg-editor appscode/uik8sappscodecom-featureset-capi-capg-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-capi-capz-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-capi-capz-editor/Chart.yaml index 7fbdaf08ac..7ce0a94990 100644 --- a/charts/uik8sappscodecom-featureset-capi-capz-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-capi-capz-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: ' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-capi-capz-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-featureset-capi-capz-editor/README.md b/charts/uik8sappscodecom-featureset-capi-capz-editor/README.md index 1e223f7b1b..a53e084deb 100644 --- a/charts/uik8sappscodecom-featureset-capi-capz-editor/README.md +++ b/charts/uik8sappscodecom-featureset-capi-capz-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-capi-capz-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-featureset-capi-capz-editor appscode/uik8sappscodecom-featureset-capi-capz-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-featureset-capi-capz-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-featureset-capi-capz-editor appscode/uik8sappscodecom-featureset-capi-capz-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-capi-capz-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-capz-editor appscode/uik8sappscodecom-featureset-capi-capz-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-featureset-capi-capz-editor appscode/uik8sappscodecom-featureset-capi-capz-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -60,12 +60,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-capz-editor appscode/uik8sappscodecom-featureset-capi-capz-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-capi-capz-editor appscode/uik8sappscodecom-featureset-capi-capz-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-capz-editor appscode/uik8sappscodecom-featureset-capi-capz-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-capi-capz-editor appscode/uik8sappscodecom-featureset-capi-capz-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-capi-core-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-capi-core-editor/Chart.yaml index baf37704c6..d9bbec5285 100644 --- a/charts/uik8sappscodecom-featureset-capi-core-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-capi-core-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-capi-core-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-featureset-capi-core-editor/README.md b/charts/uik8sappscodecom-featureset-capi-core-editor/README.md index c1a4828c40..8fef490f38 100644 --- a/charts/uik8sappscodecom-featureset-capi-core-editor/README.md +++ b/charts/uik8sappscodecom-featureset-capi-core-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-capi-core-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-featureset-capi-core-editor appscode/uik8sappscodecom-featureset-capi-core-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-featureset-capi-core-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-featureset-capi-core-editor appscode/uik8sappscodecom-featureset-capi-core-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-capi-core-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-core-editor appscode/uik8sappscodecom-featureset-capi-core-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-featureset-capi-core-editor appscode/uik8sappscodecom-featureset-capi-core-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -62,12 +62,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-core-editor appscode/uik8sappscodecom-featureset-capi-core-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-capi-core-editor appscode/uik8sappscodecom-featureset-capi-core-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-core-editor appscode/uik8sappscodecom-featureset-capi-core-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-capi-core-editor appscode/uik8sappscodecom-featureset-capi-core-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-crossplane-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-crossplane-editor/Chart.yaml index fd223a661f..01cc3cc98c 100644 --- a/charts/uik8sappscodecom-featureset-crossplane-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-crossplane-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-crossplane-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-featureset-crossplane-editor/README.md b/charts/uik8sappscodecom-featureset-crossplane-editor/README.md index 46b8b6f941..c7277daedc 100644 --- a/charts/uik8sappscodecom-featureset-crossplane-editor/README.md +++ b/charts/uik8sappscodecom-featureset-crossplane-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-crossplane-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-featureset-crossplane-editor appscode/uik8sappscodecom-featureset-crossplane-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-featureset-crossplane-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-featureset-crossplane-editor appscode/uik8sappscodecom-featureset-crossplane-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-crossplane-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-crossplane-editor appscode/uik8sappscodecom-featureset-crossplane-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-featureset-crossplane-editor appscode/uik8sappscodecom-featureset-crossplane-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -63,12 +63,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-crossplane-editor appscode/uik8sappscodecom-featureset-crossplane-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-crossplane-editor appscode/uik8sappscodecom-featureset-crossplane-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-crossplane-editor appscode/uik8sappscodecom-featureset-crossplane-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-crossplane-editor appscode/uik8sappscodecom-featureset-crossplane-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-ocm-hub-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-ocm-hub-editor/Chart.yaml index 15e612d580..cca4b9318f 100644 --- a/charts/uik8sappscodecom-featureset-ocm-hub-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-ocm-hub-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-ocm-hub-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-featureset-ocm-hub-editor/README.md b/charts/uik8sappscodecom-featureset-ocm-hub-editor/README.md index 71b49b433f..fa409313aa 100644 --- a/charts/uik8sappscodecom-featureset-ocm-hub-editor/README.md +++ b/charts/uik8sappscodecom-featureset-ocm-hub-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-ocm-hub-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-featureset-ocm-hub-editor appscode/uik8sappscodecom-featureset-ocm-hub-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-featureset-ocm-hub-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-featureset-ocm-hub-editor appscode/uik8sappscodecom-featureset-ocm-hub-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-ocm-hub-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-ocm-hub-editor appscode/uik8sappscodecom-featureset-ocm-hub-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-featureset-ocm-hub-editor appscode/uik8sappscodecom-featureset-ocm-hub-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -70,12 +70,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-ocm-hub-editor appscode/uik8sappscodecom-featureset-ocm-hub-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-ocm-hub-editor appscode/uik8sappscodecom-featureset-ocm-hub-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-ocm-hub-editor appscode/uik8sappscodecom-featureset-ocm-hub-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-ocm-hub-editor appscode/uik8sappscodecom-featureset-ocm-hub-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-ocm-spoke-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-ocm-spoke-editor/Chart.yaml index 440eed6271..eab1d21a2a 100644 --- a/charts/uik8sappscodecom-featureset-ocm-spoke-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-ocm-spoke-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-ocm-spoke-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-featureset-ocm-spoke-editor/README.md b/charts/uik8sappscodecom-featureset-ocm-spoke-editor/README.md index 94ee107dab..0026f16793 100644 --- a/charts/uik8sappscodecom-featureset-ocm-spoke-editor/README.md +++ b/charts/uik8sappscodecom-featureset-ocm-spoke-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-ocm-spoke-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-featureset-ocm-spoke-editor appscode/uik8sappscodecom-featureset-ocm-spoke-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-featureset-ocm-spoke-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-featureset-ocm-spoke-editor appscode/uik8sappscodecom-featureset-ocm-spoke-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-ocm-spoke-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-ocm-spoke-editor appscode/uik8sappscodecom-featureset-ocm-spoke-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-featureset-ocm-spoke-editor appscode/uik8sappscodecom-featureset-ocm-spoke-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -60,12 +60,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-ocm-spoke-editor appscode/uik8sappscodecom-featureset-ocm-spoke-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-ocm-spoke-editor appscode/uik8sappscodecom-featureset-ocm-spoke-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-ocm-spoke-editor appscode/uik8sappscodecom-featureset-ocm-spoke-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-ocm-spoke-editor appscode/uik8sappscodecom-featureset-ocm-spoke-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-backup-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-backup-editor/Chart.yaml index 5676769ef0..ee9b116937 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-backup-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-backup-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-backup-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-backup-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-backup-editor/README.md index b35758671c..4ba2253df7 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-backup-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-backup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-backup-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-backup-editor appscode/uik8sappscodecom-featureset-opscenter-backup-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-backup-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-backup-editor appscode/uik8sappscodecom-featureset-opscenter-backup-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-backup-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-backup-editor appscode/uik8sappscodecom-featureset-opscenter-backup-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-backup-editor appscode/uik8sappscodecom-featureset-opscenter-backup-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -63,12 +63,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-backup-editor appscode/uik8sappscodecom-featureset-opscenter-backup-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-backup-editor appscode/uik8sappscodecom-featureset-opscenter-backup-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-backup-editor appscode/uik8sappscodecom-featureset-opscenter-backup-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-backup-editor appscode/uik8sappscodecom-featureset-opscenter-backup-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-core-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-core-editor/Chart.yaml index 9217fd1167..6df8ca2f2b 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-core-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-core-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-core-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-core-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-core-editor/README.md index 4f04d118ad..e96ca8d4ac 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-core-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-core-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-core-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-core-editor appscode/uik8sappscodecom-featureset-opscenter-core-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-core-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-core-editor appscode/uik8sappscodecom-featureset-opscenter-core-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-core-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-core-editor appscode/uik8sappscodecom-featureset-opscenter-core-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-core-editor appscode/uik8sappscodecom-featureset-opscenter-core-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -65,12 +65,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-core-editor appscode/uik8sappscodecom-featureset-opscenter-core-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-core-editor appscode/uik8sappscodecom-featureset-opscenter-core-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-core-editor appscode/uik8sappscodecom-featureset-opscenter-core-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-core-editor appscode/uik8sappscodecom-featureset-opscenter-core-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-cost-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-cost-editor/Chart.yaml index fb4793478c..81d56e6e88 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-cost-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-cost-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-cost-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-cost-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-cost-editor/README.md index 96a878c56f..48022da34b 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-cost-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-cost-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-cost-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-cost-editor appscode/uik8sappscodecom-featureset-opscenter-cost-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-cost-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-cost-editor appscode/uik8sappscodecom-featureset-opscenter-cost-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-cost-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-cost-editor appscode/uik8sappscodecom-featureset-opscenter-cost-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-cost-editor appscode/uik8sappscodecom-featureset-opscenter-cost-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -63,12 +63,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-cost-editor appscode/uik8sappscodecom-featureset-opscenter-cost-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-cost-editor appscode/uik8sappscodecom-featureset-opscenter-cost-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-cost-editor appscode/uik8sappscodecom-featureset-opscenter-cost-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-cost-editor appscode/uik8sappscodecom-featureset-opscenter-cost-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-datastore-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-datastore-editor/Chart.yaml index 1fc6dc2c38..f4b5515e57 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-datastore-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-datastore-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-datastore-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-datastore-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-datastore-editor/README.md index 9cc991b1e0..9c7b191403 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-datastore-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-datastore-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-datastore-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-datastore-editor appscode/uik8sappscodecom-featureset-opscenter-datastore-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-datastore-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-datastore-editor appscode/uik8sappscodecom-featureset-opscenter-datastore-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-datastore-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-datastore-editor appscode/uik8sappscodecom-featureset-opscenter-datastore-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-datastore-editor appscode/uik8sappscodecom-featureset-opscenter-datastore-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -63,12 +63,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-datastore-editor appscode/uik8sappscodecom-featureset-opscenter-datastore-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-datastore-editor appscode/uik8sappscodecom-featureset-opscenter-datastore-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-datastore-editor appscode/uik8sappscodecom-featureset-opscenter-datastore-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-datastore-editor appscode/uik8sappscodecom-featureset-opscenter-datastore-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-monitoring-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-monitoring-editor/Chart.yaml index b6032838d3..5f172f2ea8 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-monitoring-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-monitoring-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2beta2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FeatureSet Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-monitoring-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-monitoring-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-monitoring-editor/README.md index 094f9b3094..06b6607328 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-monitoring-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-monitoring-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-monitoring-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-monitoring-editor appscode/uik8sappscodecom-featureset-opscenter-monitoring-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-monitoring-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-monitoring-editor appscode/uik8sappscodecom-featureset-opscenter-monitoring-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-monitoring-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-monitoring-editor appscode/uik8sappscodecom-featureset-opscenter-monitoring-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-monitoring-editor appscode/uik8sappscodecom-featureset-opscenter-monitoring-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -66,12 +66,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-monitoring-editor appscode/uik8sappscodecom-featureset-opscenter-monitoring-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-monitoring-editor appscode/uik8sappscodecom-featureset-opscenter-monitoring-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-monitoring-editor appscode/uik8sappscodecom-featureset-opscenter-monitoring-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-monitoring-editor appscode/uik8sappscodecom-featureset-opscenter-monitoring-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-networking-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-networking-editor/Chart.yaml index 28f3fbf990..ccbdf32b57 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-networking-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-networking-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-networking-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-networking-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-networking-editor/README.md index 37658597b5..d75c438e39 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-networking-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-networking-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-networking-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-networking-editor appscode/uik8sappscodecom-featureset-opscenter-networking-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-networking-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-networking-editor appscode/uik8sappscodecom-featureset-opscenter-networking-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-networking-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-networking-editor appscode/uik8sappscodecom-featureset-opscenter-networking-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-networking-editor appscode/uik8sappscodecom-featureset-opscenter-networking-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -63,12 +63,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-networking-editor appscode/uik8sappscodecom-featureset-opscenter-networking-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-networking-editor appscode/uik8sappscodecom-featureset-opscenter-networking-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-networking-editor appscode/uik8sappscodecom-featureset-opscenter-networking-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-networking-editor appscode/uik8sappscodecom-featureset-opscenter-networking-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-observability-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-observability-editor/Chart.yaml index 7afb64eee0..bab1b4300f 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-observability-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-observability-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-observability-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-observability-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-observability-editor/README.md index ae9297cacb..d87f395af3 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-observability-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-observability-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-observability-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-observability-editor appscode/uik8sappscodecom-featureset-opscenter-observability-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-observability-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-observability-editor appscode/uik8sappscodecom-featureset-opscenter-observability-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-observability-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-observability-editor appscode/uik8sappscodecom-featureset-opscenter-observability-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-observability-editor appscode/uik8sappscodecom-featureset-opscenter-observability-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -76,12 +76,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-observability-editor appscode/uik8sappscodecom-featureset-opscenter-observability-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-observability-editor appscode/uik8sappscodecom-featureset-opscenter-observability-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-observability-editor appscode/uik8sappscodecom-featureset-opscenter-observability-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-observability-editor appscode/uik8sappscodecom-featureset-opscenter-observability-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-policy-management-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-policy-management-editor/Chart.yaml index 3f4ed9f6f8..d2d5825997 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-policy-management-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-policy-management-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-policy-management-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-policy-management-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-policy-management-editor/README.md index f235161466..b6877ceaa9 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-policy-management-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-policy-management-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-policy-management-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-policy-management-editor appscode/uik8sappscodecom-featureset-opscenter-policy-management-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-policy-management-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-policy-management-editor appscode/uik8sappscodecom-featureset-opscenter-policy-management-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-policy-management-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-policy-management-editor appscode/uik8sappscodecom-featureset-opscenter-policy-management-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-policy-management-editor appscode/uik8sappscodecom-featureset-opscenter-policy-management-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -65,12 +65,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-policy-management-editor appscode/uik8sappscodecom-featureset-opscenter-policy-management-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-policy-management-editor appscode/uik8sappscodecom-featureset-opscenter-policy-management-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-policy-management-editor appscode/uik8sappscodecom-featureset-opscenter-policy-management-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-policy-management-editor appscode/uik8sappscodecom-featureset-opscenter-policy-management-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-secret-management-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-secret-management-editor/Chart.yaml index 7e02a1ca79..efbf7690e8 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-secret-management-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-secret-management-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-secret-management-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-secret-management-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-secret-management-editor/README.md index 100042deff..93e96027c8 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-secret-management-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-secret-management-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-secret-management-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-secret-management-editor appscode/uik8sappscodecom-featureset-opscenter-secret-management-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-secret-management-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-secret-management-editor appscode/uik8sappscodecom-featureset-opscenter-secret-management-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-secret-management-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-secret-management-editor appscode/uik8sappscodecom-featureset-opscenter-secret-management-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-secret-management-editor appscode/uik8sappscodecom-featureset-opscenter-secret-management-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -73,12 +73,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-secret-management-editor appscode/uik8sappscodecom-featureset-opscenter-secret-management-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-secret-management-editor appscode/uik8sappscodecom-featureset-opscenter-secret-management-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-secret-management-editor appscode/uik8sappscodecom-featureset-opscenter-secret-management-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-secret-management-editor appscode/uik8sappscodecom-featureset-opscenter-secret-management-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-security-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-security-editor/Chart.yaml index c2137f4878..aa00dce813 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-security-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-security-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-security-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-security-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-security-editor/README.md index 897c77d938..2be99f1490 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-security-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-security-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-security-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-security-editor appscode/uik8sappscodecom-featureset-opscenter-security-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-security-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-security-editor appscode/uik8sappscodecom-featureset-opscenter-security-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-security-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-security-editor appscode/uik8sappscodecom-featureset-opscenter-security-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-security-editor appscode/uik8sappscodecom-featureset-opscenter-security-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -64,12 +64,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-security-editor appscode/uik8sappscodecom-featureset-opscenter-security-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-security-editor appscode/uik8sappscodecom-featureset-opscenter-security-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-security-editor appscode/uik8sappscodecom-featureset-opscenter-security-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-security-editor appscode/uik8sappscodecom-featureset-opscenter-security-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-storage-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-storage-editor/Chart.yaml index 73a056ac3e..ae98c9c7e4 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-storage-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-storage-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-storage-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-storage-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-storage-editor/README.md index 3ecea0d8f6..606b0967dd 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-storage-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-storage-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-storage-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-storage-editor appscode/uik8sappscodecom-featureset-opscenter-storage-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-storage-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-storage-editor appscode/uik8sappscodecom-featureset-opscenter-storage-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-storage-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-storage-editor appscode/uik8sappscodecom-featureset-opscenter-storage-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-storage-editor appscode/uik8sappscodecom-featureset-opscenter-storage-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -63,12 +63,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-storage-editor appscode/uik8sappscodecom-featureset-opscenter-storage-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-storage-editor appscode/uik8sappscodecom-featureset-opscenter-storage-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-storage-editor appscode/uik8sappscodecom-featureset-opscenter-storage-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-storage-editor appscode/uik8sappscodecom-featureset-opscenter-storage-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-tools-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-tools-editor/Chart.yaml index 3a2335f6b3..7a2f39473f 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-tools-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-tools-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-tools-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-tools-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-tools-editor/README.md index 491ad2e98f..8c9fd0bfe0 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-tools-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-tools-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-tools-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-tools-editor appscode/uik8sappscodecom-featureset-opscenter-tools-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-tools-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-tools-editor appscode/uik8sappscodecom-featureset-opscenter-tools-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-tools-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-tools-editor appscode/uik8sappscodecom-featureset-opscenter-tools-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-tools-editor appscode/uik8sappscodecom-featureset-opscenter-tools-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -62,12 +62,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-tools-editor appscode/uik8sappscodecom-featureset-opscenter-tools-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-tools-editor appscode/uik8sappscodecom-featureset-opscenter-tools-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-tools-editor appscode/uik8sappscodecom-featureset-opscenter-tools-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-tools-editor appscode/uik8sappscodecom-featureset-opscenter-tools-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-saas-core-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-saas-core-editor/Chart.yaml index acc49f310c..32273a0fe4 100644 --- a/charts/uik8sappscodecom-featureset-saas-core-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-saas-core-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-saas-core-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-featureset-saas-core-editor/README.md b/charts/uik8sappscodecom-featureset-saas-core-editor/README.md index 491813c15a..a75c68c00b 100644 --- a/charts/uik8sappscodecom-featureset-saas-core-editor/README.md +++ b/charts/uik8sappscodecom-featureset-saas-core-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-saas-core-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-featureset-saas-core-editor appscode/uik8sappscodecom-featureset-saas-core-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-featureset-saas-core-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-featureset-saas-core-editor appscode/uik8sappscodecom-featureset-saas-core-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-saas-core-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-saas-core-editor appscode/uik8sappscodecom-featureset-saas-core-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-featureset-saas-core-editor appscode/uik8sappscodecom-featureset-saas-core-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -63,12 +63,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-saas-core-editor appscode/uik8sappscodecom-featureset-saas-core-editor -n default --create-namespace --version=v0.38.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-saas-core-editor appscode/uik8sappscodecom-featureset-saas-core-editor -n default --create-namespace --version=v0.39.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-saas-core-editor appscode/uik8sappscodecom-featureset-saas-core-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-saas-core-editor appscode/uik8sappscodecom-featureset-saas-core-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-resourcedashboard-editor/Chart.yaml b/charts/uik8sappscodecom-resourcedashboard-editor/Chart.yaml index 23f7c1745c..32b749532b 100644 --- a/charts/uik8sappscodecom-resourcedashboard-editor/Chart.yaml +++ b/charts/uik8sappscodecom-resourcedashboard-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.k8s.appscode.com","version":"v1alpha1","resource":"resourcedashboards"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ResourceDashboard Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uik8sappscodecom-resourcedashboard-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-resourcedashboard-editor/README.md b/charts/uik8sappscodecom-resourcedashboard-editor/README.md index 462231e397..69ac0d048c 100644 --- a/charts/uik8sappscodecom-resourcedashboard-editor/README.md +++ b/charts/uik8sappscodecom-resourcedashboard-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-resourcedashboard-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-resourcedashboard-editor appscode/uik8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-resourcedashboard-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-resourcedashboard-editor appscode/uik8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceDashboard Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `uik8sappscodecom-resourcedashboard-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-resourcedashboard-editor appscode/uik8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-resourcedashboard-editor appscode/uik8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ResourceDashboard Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-resourcedashboard-editor appscode/uik8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.k8s.appscode.com/v1alpha1 +$ helm upgrade -i uik8sappscodecom-resourcedashboard-editor appscode/uik8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-resourcedashboard-editor appscode/uik8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-resourcedashboard-editor appscode/uik8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-resourceeditor-editor/Chart.yaml b/charts/uik8sappscodecom-resourceeditor-editor/Chart.yaml index f7a2252851..146f9be5c4 100644 --- a/charts/uik8sappscodecom-resourceeditor-editor/Chart.yaml +++ b/charts/uik8sappscodecom-resourceeditor-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.k8s.appscode.com","version":"v1alpha1","resource":"resourceeditors"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ResourceEditor Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uik8sappscodecom-resourceeditor-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-resourceeditor-editor/README.md b/charts/uik8sappscodecom-resourceeditor-editor/README.md index 57e9c269fb..48f4cef299 100644 --- a/charts/uik8sappscodecom-resourceeditor-editor/README.md +++ b/charts/uik8sappscodecom-resourceeditor-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-resourceeditor-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-resourceeditor-editor appscode/uik8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-resourceeditor-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-resourceeditor-editor appscode/uik8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceEditor Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `uik8sappscodecom-resourceeditor-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-resourceeditor-editor appscode/uik8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-resourceeditor-editor appscode/uik8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ResourceEditor Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-resourceeditor-editor appscode/uik8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.k8s.appscode.com/v1alpha1 +$ helm upgrade -i uik8sappscodecom-resourceeditor-editor appscode/uik8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-resourceeditor-editor appscode/uik8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-resourceeditor-editor appscode/uik8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-resourceoutlinefilter-editor/Chart.yaml b/charts/uik8sappscodecom-resourceoutlinefilter-editor/Chart.yaml index 55714eb84d..b405b1fcce 100644 --- a/charts/uik8sappscodecom-resourceoutlinefilter-editor/Chart.yaml +++ b/charts/uik8sappscodecom-resourceoutlinefilter-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.k8s.appscode.com","version":"v1alpha1","resource":"resourceoutlinefilters"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ResourceOutlineFilter Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uik8sappscodecom-resourceoutlinefilter-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uik8sappscodecom-resourceoutlinefilter-editor/README.md b/charts/uik8sappscodecom-resourceoutlinefilter-editor/README.md index 182a4ec0f0..1d0426180f 100644 --- a/charts/uik8sappscodecom-resourceoutlinefilter-editor/README.md +++ b/charts/uik8sappscodecom-resourceoutlinefilter-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-resourceoutlinefilter-editor --version=v0.38.0 -$ helm upgrade -i uik8sappscodecom-resourceoutlinefilter-editor appscode/uik8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uik8sappscodecom-resourceoutlinefilter-editor --version=v0.39.0 +$ helm upgrade -i uik8sappscodecom-resourceoutlinefilter-editor appscode/uik8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceOutlineFilter Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `uik8sappscodecom-resourceoutlinefilter-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-resourceoutlinefilter-editor appscode/uik8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uik8sappscodecom-resourceoutlinefilter-editor appscode/uik8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ResourceOutlineFilter Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-resourceoutlinefilter-editor appscode/uik8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.k8s.appscode.com/v1alpha1 +$ helm upgrade -i uik8sappscodecom-resourceoutlinefilter-editor appscode/uik8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-resourceoutlinefilter-editor appscode/uik8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-resourceoutlinefilter-editor appscode/uik8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-databaseconnection-editor/Chart.yaml b/charts/uikubedbcom-databaseconnection-editor/Chart.yaml index c039376cf7..5cbd6fda88 100644 --- a/charts/uikubedbcom-databaseconnection-editor/Chart.yaml +++ b/charts/uikubedbcom-databaseconnection-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"databaseconnections"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DatabaseConnection Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-databaseconnection-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-databaseconnection-editor/README.md b/charts/uikubedbcom-databaseconnection-editor/README.md index 8a768583ca..61dc791a7d 100644 --- a/charts/uikubedbcom-databaseconnection-editor/README.md +++ b/charts/uikubedbcom-databaseconnection-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-databaseconnection-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-databaseconnection-editor appscode/uikubedbcom-databaseconnection-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-databaseconnection-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-databaseconnection-editor appscode/uikubedbcom-databaseconnection-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DatabaseConnection Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `uikubedbcom-databaseconnection-editor`: ```bash -$ helm upgrade -i uikubedbcom-databaseconnection-editor appscode/uikubedbcom-databaseconnection-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-databaseconnection-editor appscode/uikubedbcom-databaseconnection-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DatabaseConnection Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-databa Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-databaseconnection-editor appscode/uikubedbcom-databaseconnection-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-databaseconnection-editor appscode/uikubedbcom-databaseconnection-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-databaseconnection-editor appscode/uikubedbcom-databaseconnection-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-databaseconnection-editor appscode/uikubedbcom-databaseconnection-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-databaseinfo-editor/Chart.yaml b/charts/uikubedbcom-databaseinfo-editor/Chart.yaml index b98115a350..fa59afd05f 100644 --- a/charts/uikubedbcom-databaseinfo-editor/Chart.yaml +++ b/charts/uikubedbcom-databaseinfo-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"databaseinfoes"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: DatabaseInfo Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-databaseinfo-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-databaseinfo-editor/README.md b/charts/uikubedbcom-databaseinfo-editor/README.md index d4cd907a8a..e2916c99c2 100644 --- a/charts/uikubedbcom-databaseinfo-editor/README.md +++ b/charts/uikubedbcom-databaseinfo-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-databaseinfo-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-databaseinfo-editor appscode/uikubedbcom-databaseinfo-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-databaseinfo-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-databaseinfo-editor appscode/uikubedbcom-databaseinfo-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DatabaseInfo Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `uikubedbcom-databaseinfo-editor`: ```bash -$ helm upgrade -i uikubedbcom-databaseinfo-editor appscode/uikubedbcom-databaseinfo-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-databaseinfo-editor appscode/uikubedbcom-databaseinfo-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a DatabaseInfo Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-databa Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-databaseinfo-editor appscode/uikubedbcom-databaseinfo-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-databaseinfo-editor appscode/uikubedbcom-databaseinfo-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-databaseinfo-editor appscode/uikubedbcom-databaseinfo-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-databaseinfo-editor appscode/uikubedbcom-databaseinfo-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-elasticsearchinsight-editor/Chart.yaml b/charts/uikubedbcom-elasticsearchinsight-editor/Chart.yaml index 643676d835..633f569d87 100644 --- a/charts/uikubedbcom-elasticsearchinsight-editor/Chart.yaml +++ b/charts/uikubedbcom-elasticsearchinsight-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"elasticsearchinsights"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ElasticsearchInsight Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-elasticsearchinsight-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-elasticsearchinsight-editor/README.md b/charts/uikubedbcom-elasticsearchinsight-editor/README.md index 5476a7551a..e631bb2353 100644 --- a/charts/uikubedbcom-elasticsearchinsight-editor/README.md +++ b/charts/uikubedbcom-elasticsearchinsight-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-elasticsearchinsight-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-elasticsearchinsight-editor appscode/uikubedbcom-elasticsearchinsight-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-elasticsearchinsight-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-elasticsearchinsight-editor appscode/uikubedbcom-elasticsearchinsight-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ElasticsearchInsight Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `uikubedbcom-elasticsearchinsight-editor`: ```bash -$ helm upgrade -i uikubedbcom-elasticsearchinsight-editor appscode/uikubedbcom-elasticsearchinsight-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-elasticsearchinsight-editor appscode/uikubedbcom-elasticsearchinsight-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ElasticsearchInsight Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-elasti Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-elasticsearchinsight-editor appscode/uikubedbcom-elasticsearchinsight-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-elasticsearchinsight-editor appscode/uikubedbcom-elasticsearchinsight-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-elasticsearchinsight-editor appscode/uikubedbcom-elasticsearchinsight-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-elasticsearchinsight-editor appscode/uikubedbcom-elasticsearchinsight-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-elasticsearchnodesstats-editor/Chart.yaml b/charts/uikubedbcom-elasticsearchnodesstats-editor/Chart.yaml index a7d13e6c46..668d70df70 100644 --- a/charts/uikubedbcom-elasticsearchnodesstats-editor/Chart.yaml +++ b/charts/uikubedbcom-elasticsearchnodesstats-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"elasticsearchnodesstats"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ElasticsearchNodesStats Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-elasticsearchnodesstats-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-elasticsearchnodesstats-editor/README.md b/charts/uikubedbcom-elasticsearchnodesstats-editor/README.md index c8030a975e..17e81a0850 100644 --- a/charts/uikubedbcom-elasticsearchnodesstats-editor/README.md +++ b/charts/uikubedbcom-elasticsearchnodesstats-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-elasticsearchnodesstats-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-elasticsearchnodesstats-editor appscode/uikubedbcom-elasticsearchnodesstats-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-elasticsearchnodesstats-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-elasticsearchnodesstats-editor appscode/uikubedbcom-elasticsearchnodesstats-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ElasticsearchNodesStats Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `uikubedbcom-elasticsearchnodesstats-editor`: ```bash -$ helm upgrade -i uikubedbcom-elasticsearchnodesstats-editor appscode/uikubedbcom-elasticsearchnodesstats-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-elasticsearchnodesstats-editor appscode/uikubedbcom-elasticsearchnodesstats-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ElasticsearchNodesStats Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-elasti Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-elasticsearchnodesstats-editor appscode/uikubedbcom-elasticsearchnodesstats-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-elasticsearchnodesstats-editor appscode/uikubedbcom-elasticsearchnodesstats-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-elasticsearchnodesstats-editor appscode/uikubedbcom-elasticsearchnodesstats-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-elasticsearchnodesstats-editor appscode/uikubedbcom-elasticsearchnodesstats-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-elasticsearchschemaoverview-editor/Chart.yaml b/charts/uikubedbcom-elasticsearchschemaoverview-editor/Chart.yaml index 7e5092c4fb..bff0710d80 100644 --- a/charts/uikubedbcom-elasticsearchschemaoverview-editor/Chart.yaml +++ b/charts/uikubedbcom-elasticsearchschemaoverview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"elasticsearchschemaoverviews"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ElasticsearchSchemaOverview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-elasticsearchschemaoverview-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-elasticsearchschemaoverview-editor/README.md b/charts/uikubedbcom-elasticsearchschemaoverview-editor/README.md index bcbe80e19f..753bd06b83 100644 --- a/charts/uikubedbcom-elasticsearchschemaoverview-editor/README.md +++ b/charts/uikubedbcom-elasticsearchschemaoverview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-elasticsearchschemaoverview-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-elasticsearchschemaoverview-editor appscode/uikubedbcom-elasticsearchschemaoverview-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-elasticsearchschemaoverview-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-elasticsearchschemaoverview-editor appscode/uikubedbcom-elasticsearchschemaoverview-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ElasticsearchSchemaOverview Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `uikubedbcom-elasticsearchschemaoverview-editor`: ```bash -$ helm upgrade -i uikubedbcom-elasticsearchschemaoverview-editor appscode/uikubedbcom-elasticsearchschemaoverview-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-elasticsearchschemaoverview-editor appscode/uikubedbcom-elasticsearchschemaoverview-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ElasticsearchSchemaOverview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-elasti Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-elasticsearchschemaoverview-editor appscode/uikubedbcom-elasticsearchschemaoverview-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-elasticsearchschemaoverview-editor appscode/uikubedbcom-elasticsearchschemaoverview-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-elasticsearchschemaoverview-editor appscode/uikubedbcom-elasticsearchschemaoverview-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-elasticsearchschemaoverview-editor appscode/uikubedbcom-elasticsearchschemaoverview-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-mariadbinsight-editor/Chart.yaml b/charts/uikubedbcom-mariadbinsight-editor/Chart.yaml index 653551f229..1a72a38eb7 100644 --- a/charts/uikubedbcom-mariadbinsight-editor/Chart.yaml +++ b/charts/uikubedbcom-mariadbinsight-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"mariadbinsights"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MariaDBInsight Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-mariadbinsight-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-mariadbinsight-editor/README.md b/charts/uikubedbcom-mariadbinsight-editor/README.md index 001ec8f659..de056dbf95 100644 --- a/charts/uikubedbcom-mariadbinsight-editor/README.md +++ b/charts/uikubedbcom-mariadbinsight-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-mariadbinsight-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-mariadbinsight-editor appscode/uikubedbcom-mariadbinsight-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-mariadbinsight-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-mariadbinsight-editor appscode/uikubedbcom-mariadbinsight-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBInsight Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `uikubedbcom-mariadbinsight-editor`: ```bash -$ helm upgrade -i uikubedbcom-mariadbinsight-editor appscode/uikubedbcom-mariadbinsight-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-mariadbinsight-editor appscode/uikubedbcom-mariadbinsight-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MariaDBInsight Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-mariad Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-mariadbinsight-editor appscode/uikubedbcom-mariadbinsight-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-mariadbinsight-editor appscode/uikubedbcom-mariadbinsight-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-mariadbinsight-editor appscode/uikubedbcom-mariadbinsight-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-mariadbinsight-editor appscode/uikubedbcom-mariadbinsight-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-mariadbqueries-editor/Chart.yaml b/charts/uikubedbcom-mariadbqueries-editor/Chart.yaml index 66ea7b807d..b44e95a828 100644 --- a/charts/uikubedbcom-mariadbqueries-editor/Chart.yaml +++ b/charts/uikubedbcom-mariadbqueries-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"mariadbqueries"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MariaDBQueries Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-mariadbqueries-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-mariadbqueries-editor/README.md b/charts/uikubedbcom-mariadbqueries-editor/README.md index fdfa608c29..3b4b7b7305 100644 --- a/charts/uikubedbcom-mariadbqueries-editor/README.md +++ b/charts/uikubedbcom-mariadbqueries-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-mariadbqueries-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-mariadbqueries-editor appscode/uikubedbcom-mariadbqueries-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-mariadbqueries-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-mariadbqueries-editor appscode/uikubedbcom-mariadbqueries-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBQueries Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `uikubedbcom-mariadbqueries-editor`: ```bash -$ helm upgrade -i uikubedbcom-mariadbqueries-editor appscode/uikubedbcom-mariadbqueries-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-mariadbqueries-editor appscode/uikubedbcom-mariadbqueries-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MariaDBQueries Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-mariad Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-mariadbqueries-editor appscode/uikubedbcom-mariadbqueries-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-mariadbqueries-editor appscode/uikubedbcom-mariadbqueries-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-mariadbqueries-editor appscode/uikubedbcom-mariadbqueries-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-mariadbqueries-editor appscode/uikubedbcom-mariadbqueries-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-mariadbschemaoverview-editor/Chart.yaml b/charts/uikubedbcom-mariadbschemaoverview-editor/Chart.yaml index 410dd9f6ce..00f5e0c585 100644 --- a/charts/uikubedbcom-mariadbschemaoverview-editor/Chart.yaml +++ b/charts/uikubedbcom-mariadbschemaoverview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"mariadbschemaoverviews"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MariaDBSchemaOverview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-mariadbschemaoverview-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-mariadbschemaoverview-editor/README.md b/charts/uikubedbcom-mariadbschemaoverview-editor/README.md index 29ec8705ae..524315ad80 100644 --- a/charts/uikubedbcom-mariadbschemaoverview-editor/README.md +++ b/charts/uikubedbcom-mariadbschemaoverview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-mariadbschemaoverview-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-mariadbschemaoverview-editor appscode/uikubedbcom-mariadbschemaoverview-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-mariadbschemaoverview-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-mariadbschemaoverview-editor appscode/uikubedbcom-mariadbschemaoverview-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBSchemaOverview Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `uikubedbcom-mariadbschemaoverview-editor`: ```bash -$ helm upgrade -i uikubedbcom-mariadbschemaoverview-editor appscode/uikubedbcom-mariadbschemaoverview-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-mariadbschemaoverview-editor appscode/uikubedbcom-mariadbschemaoverview-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MariaDBSchemaOverview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-mariad Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-mariadbschemaoverview-editor appscode/uikubedbcom-mariadbschemaoverview-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-mariadbschemaoverview-editor appscode/uikubedbcom-mariadbschemaoverview-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-mariadbschemaoverview-editor appscode/uikubedbcom-mariadbschemaoverview-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-mariadbschemaoverview-editor appscode/uikubedbcom-mariadbschemaoverview-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-mongodbinsight-editor/Chart.yaml b/charts/uikubedbcom-mongodbinsight-editor/Chart.yaml index 304855bb56..a6eb40d7f5 100644 --- a/charts/uikubedbcom-mongodbinsight-editor/Chart.yaml +++ b/charts/uikubedbcom-mongodbinsight-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"mongodbinsights"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MongoDBInsight Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-mongodbinsight-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-mongodbinsight-editor/README.md b/charts/uikubedbcom-mongodbinsight-editor/README.md index a2caf512ce..f443ce1698 100644 --- a/charts/uikubedbcom-mongodbinsight-editor/README.md +++ b/charts/uikubedbcom-mongodbinsight-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-mongodbinsight-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-mongodbinsight-editor appscode/uikubedbcom-mongodbinsight-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-mongodbinsight-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-mongodbinsight-editor appscode/uikubedbcom-mongodbinsight-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBInsight Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `uikubedbcom-mongodbinsight-editor`: ```bash -$ helm upgrade -i uikubedbcom-mongodbinsight-editor appscode/uikubedbcom-mongodbinsight-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-mongodbinsight-editor appscode/uikubedbcom-mongodbinsight-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MongoDBInsight Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-mongod Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-mongodbinsight-editor appscode/uikubedbcom-mongodbinsight-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-mongodbinsight-editor appscode/uikubedbcom-mongodbinsight-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-mongodbinsight-editor appscode/uikubedbcom-mongodbinsight-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-mongodbinsight-editor appscode/uikubedbcom-mongodbinsight-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-mongodbqueries-editor/Chart.yaml b/charts/uikubedbcom-mongodbqueries-editor/Chart.yaml index 4691c5ce13..f393dd39ac 100644 --- a/charts/uikubedbcom-mongodbqueries-editor/Chart.yaml +++ b/charts/uikubedbcom-mongodbqueries-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"mongodbqueries"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MongoDBQueries Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-mongodbqueries-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-mongodbqueries-editor/README.md b/charts/uikubedbcom-mongodbqueries-editor/README.md index 3656623592..754a8d0814 100644 --- a/charts/uikubedbcom-mongodbqueries-editor/README.md +++ b/charts/uikubedbcom-mongodbqueries-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-mongodbqueries-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-mongodbqueries-editor appscode/uikubedbcom-mongodbqueries-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-mongodbqueries-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-mongodbqueries-editor appscode/uikubedbcom-mongodbqueries-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBQueries Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `uikubedbcom-mongodbqueries-editor`: ```bash -$ helm upgrade -i uikubedbcom-mongodbqueries-editor appscode/uikubedbcom-mongodbqueries-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-mongodbqueries-editor appscode/uikubedbcom-mongodbqueries-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MongoDBQueries Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-mongod Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-mongodbqueries-editor appscode/uikubedbcom-mongodbqueries-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-mongodbqueries-editor appscode/uikubedbcom-mongodbqueries-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-mongodbqueries-editor appscode/uikubedbcom-mongodbqueries-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-mongodbqueries-editor appscode/uikubedbcom-mongodbqueries-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-mongodbschemaoverview-editor/Chart.yaml b/charts/uikubedbcom-mongodbschemaoverview-editor/Chart.yaml index f820415d36..229f08f63e 100644 --- a/charts/uikubedbcom-mongodbschemaoverview-editor/Chart.yaml +++ b/charts/uikubedbcom-mongodbschemaoverview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"mongodbschemaoverviews"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MongoDBSchemaOverview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-mongodbschemaoverview-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-mongodbschemaoverview-editor/README.md b/charts/uikubedbcom-mongodbschemaoverview-editor/README.md index d41347f567..677720fcb2 100644 --- a/charts/uikubedbcom-mongodbschemaoverview-editor/README.md +++ b/charts/uikubedbcom-mongodbschemaoverview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-mongodbschemaoverview-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-mongodbschemaoverview-editor appscode/uikubedbcom-mongodbschemaoverview-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-mongodbschemaoverview-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-mongodbschemaoverview-editor appscode/uikubedbcom-mongodbschemaoverview-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBSchemaOverview Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `uikubedbcom-mongodbschemaoverview-editor`: ```bash -$ helm upgrade -i uikubedbcom-mongodbschemaoverview-editor appscode/uikubedbcom-mongodbschemaoverview-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-mongodbschemaoverview-editor appscode/uikubedbcom-mongodbschemaoverview-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MongoDBSchemaOverview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-mongod Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-mongodbschemaoverview-editor appscode/uikubedbcom-mongodbschemaoverview-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-mongodbschemaoverview-editor appscode/uikubedbcom-mongodbschemaoverview-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-mongodbschemaoverview-editor appscode/uikubedbcom-mongodbschemaoverview-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-mongodbschemaoverview-editor appscode/uikubedbcom-mongodbschemaoverview-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-mysqlinsight-editor/Chart.yaml b/charts/uikubedbcom-mysqlinsight-editor/Chart.yaml index 0119382d08..83fee9ccbc 100644 --- a/charts/uikubedbcom-mysqlinsight-editor/Chart.yaml +++ b/charts/uikubedbcom-mysqlinsight-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"mysqlinsights"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MySQLInsight Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-mysqlinsight-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-mysqlinsight-editor/README.md b/charts/uikubedbcom-mysqlinsight-editor/README.md index 019729490f..8f8d4bbe7b 100644 --- a/charts/uikubedbcom-mysqlinsight-editor/README.md +++ b/charts/uikubedbcom-mysqlinsight-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-mysqlinsight-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-mysqlinsight-editor appscode/uikubedbcom-mysqlinsight-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-mysqlinsight-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-mysqlinsight-editor appscode/uikubedbcom-mysqlinsight-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLInsight Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `uikubedbcom-mysqlinsight-editor`: ```bash -$ helm upgrade -i uikubedbcom-mysqlinsight-editor appscode/uikubedbcom-mysqlinsight-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-mysqlinsight-editor appscode/uikubedbcom-mysqlinsight-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MySQLInsight Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-mysqli Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-mysqlinsight-editor appscode/uikubedbcom-mysqlinsight-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-mysqlinsight-editor appscode/uikubedbcom-mysqlinsight-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-mysqlinsight-editor appscode/uikubedbcom-mysqlinsight-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-mysqlinsight-editor appscode/uikubedbcom-mysqlinsight-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-mysqlqueries-editor/Chart.yaml b/charts/uikubedbcom-mysqlqueries-editor/Chart.yaml index 5ca55060bb..b3ae67f7c1 100644 --- a/charts/uikubedbcom-mysqlqueries-editor/Chart.yaml +++ b/charts/uikubedbcom-mysqlqueries-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"mysqlqueries"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MySQLQueries Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-mysqlqueries-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-mysqlqueries-editor/README.md b/charts/uikubedbcom-mysqlqueries-editor/README.md index a68ec4ef60..d11655ca3f 100644 --- a/charts/uikubedbcom-mysqlqueries-editor/README.md +++ b/charts/uikubedbcom-mysqlqueries-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-mysqlqueries-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-mysqlqueries-editor appscode/uikubedbcom-mysqlqueries-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-mysqlqueries-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-mysqlqueries-editor appscode/uikubedbcom-mysqlqueries-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLQueries Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `uikubedbcom-mysqlqueries-editor`: ```bash -$ helm upgrade -i uikubedbcom-mysqlqueries-editor appscode/uikubedbcom-mysqlqueries-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-mysqlqueries-editor appscode/uikubedbcom-mysqlqueries-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MySQLQueries Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-mysqlq Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-mysqlqueries-editor appscode/uikubedbcom-mysqlqueries-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-mysqlqueries-editor appscode/uikubedbcom-mysqlqueries-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-mysqlqueries-editor appscode/uikubedbcom-mysqlqueries-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-mysqlqueries-editor appscode/uikubedbcom-mysqlqueries-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-mysqlschemaoverview-editor/Chart.yaml b/charts/uikubedbcom-mysqlschemaoverview-editor/Chart.yaml index be850adb97..7ed86b852e 100644 --- a/charts/uikubedbcom-mysqlschemaoverview-editor/Chart.yaml +++ b/charts/uikubedbcom-mysqlschemaoverview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"mysqlschemaoverviews"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: MySQLSchemaOverview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-mysqlschemaoverview-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-mysqlschemaoverview-editor/README.md b/charts/uikubedbcom-mysqlschemaoverview-editor/README.md index 3101fe95d0..bba6f6b35e 100644 --- a/charts/uikubedbcom-mysqlschemaoverview-editor/README.md +++ b/charts/uikubedbcom-mysqlschemaoverview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-mysqlschemaoverview-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-mysqlschemaoverview-editor appscode/uikubedbcom-mysqlschemaoverview-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-mysqlschemaoverview-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-mysqlschemaoverview-editor appscode/uikubedbcom-mysqlschemaoverview-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLSchemaOverview Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `uikubedbcom-mysqlschemaoverview-editor`: ```bash -$ helm upgrade -i uikubedbcom-mysqlschemaoverview-editor appscode/uikubedbcom-mysqlschemaoverview-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-mysqlschemaoverview-editor appscode/uikubedbcom-mysqlschemaoverview-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a MySQLSchemaOverview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-mysqls Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-mysqlschemaoverview-editor appscode/uikubedbcom-mysqlschemaoverview-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-mysqlschemaoverview-editor appscode/uikubedbcom-mysqlschemaoverview-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-mysqlschemaoverview-editor appscode/uikubedbcom-mysqlschemaoverview-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-mysqlschemaoverview-editor appscode/uikubedbcom-mysqlschemaoverview-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-pgbouncerinsight-editor/Chart.yaml b/charts/uikubedbcom-pgbouncerinsight-editor/Chart.yaml index 45d99d36e3..6264438e49 100644 --- a/charts/uikubedbcom-pgbouncerinsight-editor/Chart.yaml +++ b/charts/uikubedbcom-pgbouncerinsight-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"pgbouncerinsights"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PgBouncerInsight Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-pgbouncerinsight-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-pgbouncerinsight-editor/README.md b/charts/uikubedbcom-pgbouncerinsight-editor/README.md index 9d1f5b0d42..37ec377aae 100644 --- a/charts/uikubedbcom-pgbouncerinsight-editor/README.md +++ b/charts/uikubedbcom-pgbouncerinsight-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-pgbouncerinsight-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-pgbouncerinsight-editor appscode/uikubedbcom-pgbouncerinsight-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-pgbouncerinsight-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-pgbouncerinsight-editor appscode/uikubedbcom-pgbouncerinsight-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncerInsight Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `uikubedbcom-pgbouncerinsight-editor`: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerinsight-editor appscode/uikubedbcom-pgbouncerinsight-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-pgbouncerinsight-editor appscode/uikubedbcom-pgbouncerinsight-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PgBouncerInsight Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-pgboun Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerinsight-editor appscode/uikubedbcom-pgbouncerinsight-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-pgbouncerinsight-editor appscode/uikubedbcom-pgbouncerinsight-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerinsight-editor appscode/uikubedbcom-pgbouncerinsight-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-pgbouncerinsight-editor appscode/uikubedbcom-pgbouncerinsight-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-pgbouncerpooloverview-editor/Chart.yaml b/charts/uikubedbcom-pgbouncerpooloverview-editor/Chart.yaml index 9d4d114766..e3b4a19481 100644 --- a/charts/uikubedbcom-pgbouncerpooloverview-editor/Chart.yaml +++ b/charts/uikubedbcom-pgbouncerpooloverview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"pgbouncerpooloverviews"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PgBouncerPoolOverview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-pgbouncerpooloverview-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-pgbouncerpooloverview-editor/README.md b/charts/uikubedbcom-pgbouncerpooloverview-editor/README.md index 409221e73e..ed01e9ff99 100644 --- a/charts/uikubedbcom-pgbouncerpooloverview-editor/README.md +++ b/charts/uikubedbcom-pgbouncerpooloverview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-pgbouncerpooloverview-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-pgbouncerpooloverview-editor appscode/uikubedbcom-pgbouncerpooloverview-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-pgbouncerpooloverview-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-pgbouncerpooloverview-editor appscode/uikubedbcom-pgbouncerpooloverview-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncerPoolOverview Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `uikubedbcom-pgbouncerpooloverview-editor`: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerpooloverview-editor appscode/uikubedbcom-pgbouncerpooloverview-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-pgbouncerpooloverview-editor appscode/uikubedbcom-pgbouncerpooloverview-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PgBouncerPoolOverview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-pgboun Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerpooloverview-editor appscode/uikubedbcom-pgbouncerpooloverview-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-pgbouncerpooloverview-editor appscode/uikubedbcom-pgbouncerpooloverview-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerpooloverview-editor appscode/uikubedbcom-pgbouncerpooloverview-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-pgbouncerpooloverview-editor appscode/uikubedbcom-pgbouncerpooloverview-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-pgbouncerpools-editor/Chart.yaml b/charts/uikubedbcom-pgbouncerpools-editor/Chart.yaml index 46d6b61bac..51d45d42f7 100644 --- a/charts/uikubedbcom-pgbouncerpools-editor/Chart.yaml +++ b/charts/uikubedbcom-pgbouncerpools-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"pgbouncerpools"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PgBouncerPools Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-pgbouncerpools-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-pgbouncerpools-editor/README.md b/charts/uikubedbcom-pgbouncerpools-editor/README.md index e5dae5633e..a5431867b8 100644 --- a/charts/uikubedbcom-pgbouncerpools-editor/README.md +++ b/charts/uikubedbcom-pgbouncerpools-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-pgbouncerpools-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-pgbouncerpools-editor appscode/uikubedbcom-pgbouncerpools-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-pgbouncerpools-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-pgbouncerpools-editor appscode/uikubedbcom-pgbouncerpools-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncerPools Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `uikubedbcom-pgbouncerpools-editor`: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerpools-editor appscode/uikubedbcom-pgbouncerpools-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-pgbouncerpools-editor appscode/uikubedbcom-pgbouncerpools-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PgBouncerPools Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-pgboun Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerpools-editor appscode/uikubedbcom-pgbouncerpools-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-pgbouncerpools-editor appscode/uikubedbcom-pgbouncerpools-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerpools-editor appscode/uikubedbcom-pgbouncerpools-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-pgbouncerpools-editor appscode/uikubedbcom-pgbouncerpools-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-pgbouncerserveroverview-editor/Chart.yaml b/charts/uikubedbcom-pgbouncerserveroverview-editor/Chart.yaml index fd08d899c3..734eaf4ae6 100644 --- a/charts/uikubedbcom-pgbouncerserveroverview-editor/Chart.yaml +++ b/charts/uikubedbcom-pgbouncerserveroverview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"pgbouncerserveroverviews"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PgBouncerServerOverview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-pgbouncerserveroverview-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-pgbouncerserveroverview-editor/README.md b/charts/uikubedbcom-pgbouncerserveroverview-editor/README.md index 2d14a4d431..6992498f10 100644 --- a/charts/uikubedbcom-pgbouncerserveroverview-editor/README.md +++ b/charts/uikubedbcom-pgbouncerserveroverview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-pgbouncerserveroverview-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-pgbouncerserveroverview-editor appscode/uikubedbcom-pgbouncerserveroverview-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-pgbouncerserveroverview-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-pgbouncerserveroverview-editor appscode/uikubedbcom-pgbouncerserveroverview-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncerServerOverview Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `uikubedbcom-pgbouncerserveroverview-editor`: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerserveroverview-editor appscode/uikubedbcom-pgbouncerserveroverview-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-pgbouncerserveroverview-editor appscode/uikubedbcom-pgbouncerserveroverview-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PgBouncerServerOverview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-pgboun Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerserveroverview-editor appscode/uikubedbcom-pgbouncerserveroverview-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-pgbouncerserveroverview-editor appscode/uikubedbcom-pgbouncerserveroverview-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerserveroverview-editor appscode/uikubedbcom-pgbouncerserveroverview-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-pgbouncerserveroverview-editor appscode/uikubedbcom-pgbouncerserveroverview-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-pgbouncersettings-editor/Chart.yaml b/charts/uikubedbcom-pgbouncersettings-editor/Chart.yaml index 420e735d10..b6c57727ff 100644 --- a/charts/uikubedbcom-pgbouncersettings-editor/Chart.yaml +++ b/charts/uikubedbcom-pgbouncersettings-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"pgbouncersettings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PgBouncerSettings Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-pgbouncersettings-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-pgbouncersettings-editor/README.md b/charts/uikubedbcom-pgbouncersettings-editor/README.md index 96a6978507..43182c9049 100644 --- a/charts/uikubedbcom-pgbouncersettings-editor/README.md +++ b/charts/uikubedbcom-pgbouncersettings-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-pgbouncersettings-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-pgbouncersettings-editor appscode/uikubedbcom-pgbouncersettings-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-pgbouncersettings-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-pgbouncersettings-editor appscode/uikubedbcom-pgbouncersettings-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncerSettings Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `uikubedbcom-pgbouncersettings-editor`: ```bash -$ helm upgrade -i uikubedbcom-pgbouncersettings-editor appscode/uikubedbcom-pgbouncersettings-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-pgbouncersettings-editor appscode/uikubedbcom-pgbouncersettings-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PgBouncerSettings Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-pgboun Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-pgbouncersettings-editor appscode/uikubedbcom-pgbouncersettings-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-pgbouncersettings-editor appscode/uikubedbcom-pgbouncersettings-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-pgbouncersettings-editor appscode/uikubedbcom-pgbouncersettings-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-pgbouncersettings-editor appscode/uikubedbcom-pgbouncersettings-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-postgresinsight-editor/Chart.yaml b/charts/uikubedbcom-postgresinsight-editor/Chart.yaml index c8cf0840ce..a764812a7a 100644 --- a/charts/uikubedbcom-postgresinsight-editor/Chart.yaml +++ b/charts/uikubedbcom-postgresinsight-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"postgresinsights"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PostgresInsight Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-postgresinsight-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-postgresinsight-editor/README.md b/charts/uikubedbcom-postgresinsight-editor/README.md index 954eba8b92..c2e8a47a8a 100644 --- a/charts/uikubedbcom-postgresinsight-editor/README.md +++ b/charts/uikubedbcom-postgresinsight-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-postgresinsight-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-postgresinsight-editor appscode/uikubedbcom-postgresinsight-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-postgresinsight-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-postgresinsight-editor appscode/uikubedbcom-postgresinsight-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresInsight Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `uikubedbcom-postgresinsight-editor`: ```bash -$ helm upgrade -i uikubedbcom-postgresinsight-editor appscode/uikubedbcom-postgresinsight-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-postgresinsight-editor appscode/uikubedbcom-postgresinsight-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PostgresInsight Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-postgr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-postgresinsight-editor appscode/uikubedbcom-postgresinsight-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-postgresinsight-editor appscode/uikubedbcom-postgresinsight-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-postgresinsight-editor appscode/uikubedbcom-postgresinsight-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-postgresinsight-editor appscode/uikubedbcom-postgresinsight-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-postgresqueries-editor/Chart.yaml b/charts/uikubedbcom-postgresqueries-editor/Chart.yaml index 074c77c58a..3fbd0b8c49 100644 --- a/charts/uikubedbcom-postgresqueries-editor/Chart.yaml +++ b/charts/uikubedbcom-postgresqueries-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"postgresqueries"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PostgresQueries Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-postgresqueries-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-postgresqueries-editor/README.md b/charts/uikubedbcom-postgresqueries-editor/README.md index ea383aa42a..bd7537ff28 100644 --- a/charts/uikubedbcom-postgresqueries-editor/README.md +++ b/charts/uikubedbcom-postgresqueries-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-postgresqueries-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-postgresqueries-editor appscode/uikubedbcom-postgresqueries-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-postgresqueries-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-postgresqueries-editor appscode/uikubedbcom-postgresqueries-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresQueries Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `uikubedbcom-postgresqueries-editor`: ```bash -$ helm upgrade -i uikubedbcom-postgresqueries-editor appscode/uikubedbcom-postgresqueries-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-postgresqueries-editor appscode/uikubedbcom-postgresqueries-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PostgresQueries Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-postgr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-postgresqueries-editor appscode/uikubedbcom-postgresqueries-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-postgresqueries-editor appscode/uikubedbcom-postgresqueries-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-postgresqueries-editor appscode/uikubedbcom-postgresqueries-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-postgresqueries-editor appscode/uikubedbcom-postgresqueries-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-postgresschemaoverview-editor/Chart.yaml b/charts/uikubedbcom-postgresschemaoverview-editor/Chart.yaml index 66c9616764..e8975bca20 100644 --- a/charts/uikubedbcom-postgresschemaoverview-editor/Chart.yaml +++ b/charts/uikubedbcom-postgresschemaoverview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"postgresschemaoverviews"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PostgresSchemaOverview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-postgresschemaoverview-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-postgresschemaoverview-editor/README.md b/charts/uikubedbcom-postgresschemaoverview-editor/README.md index f02cfb46a1..56083f1c3d 100644 --- a/charts/uikubedbcom-postgresschemaoverview-editor/README.md +++ b/charts/uikubedbcom-postgresschemaoverview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-postgresschemaoverview-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-postgresschemaoverview-editor appscode/uikubedbcom-postgresschemaoverview-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-postgresschemaoverview-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-postgresschemaoverview-editor appscode/uikubedbcom-postgresschemaoverview-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresSchemaOverview Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `uikubedbcom-postgresschemaoverview-editor`: ```bash -$ helm upgrade -i uikubedbcom-postgresschemaoverview-editor appscode/uikubedbcom-postgresschemaoverview-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-postgresschemaoverview-editor appscode/uikubedbcom-postgresschemaoverview-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PostgresSchemaOverview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-postgr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-postgresschemaoverview-editor appscode/uikubedbcom-postgresschemaoverview-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-postgresschemaoverview-editor appscode/uikubedbcom-postgresschemaoverview-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-postgresschemaoverview-editor appscode/uikubedbcom-postgresschemaoverview-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-postgresschemaoverview-editor appscode/uikubedbcom-postgresschemaoverview-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-postgressettings-editor/Chart.yaml b/charts/uikubedbcom-postgressettings-editor/Chart.yaml index b60f675c79..3c686b3cff 100644 --- a/charts/uikubedbcom-postgressettings-editor/Chart.yaml +++ b/charts/uikubedbcom-postgressettings-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"postgressettings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: PostgresSettings Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-postgressettings-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-postgressettings-editor/README.md b/charts/uikubedbcom-postgressettings-editor/README.md index 07c7f4f8a1..9432662adb 100644 --- a/charts/uikubedbcom-postgressettings-editor/README.md +++ b/charts/uikubedbcom-postgressettings-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-postgressettings-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-postgressettings-editor appscode/uikubedbcom-postgressettings-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-postgressettings-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-postgressettings-editor appscode/uikubedbcom-postgressettings-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresSettings Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `uikubedbcom-postgressettings-editor`: ```bash -$ helm upgrade -i uikubedbcom-postgressettings-editor appscode/uikubedbcom-postgressettings-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-postgressettings-editor appscode/uikubedbcom-postgressettings-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a PostgresSettings Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-postgr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-postgressettings-editor appscode/uikubedbcom-postgressettings-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-postgressettings-editor appscode/uikubedbcom-postgressettings-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-postgressettings-editor appscode/uikubedbcom-postgressettings-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-postgressettings-editor appscode/uikubedbcom-postgressettings-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-proxysqlinsight-editor/Chart.yaml b/charts/uikubedbcom-proxysqlinsight-editor/Chart.yaml index 7d6bd40fef..65e57b38b9 100644 --- a/charts/uikubedbcom-proxysqlinsight-editor/Chart.yaml +++ b/charts/uikubedbcom-proxysqlinsight-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"proxysqlinsights"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProxySQLInsight Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-proxysqlinsight-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-proxysqlinsight-editor/README.md b/charts/uikubedbcom-proxysqlinsight-editor/README.md index a7414b141d..52259a7956 100644 --- a/charts/uikubedbcom-proxysqlinsight-editor/README.md +++ b/charts/uikubedbcom-proxysqlinsight-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-proxysqlinsight-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-proxysqlinsight-editor appscode/uikubedbcom-proxysqlinsight-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-proxysqlinsight-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-proxysqlinsight-editor appscode/uikubedbcom-proxysqlinsight-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQLInsight Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `uikubedbcom-proxysqlinsight-editor`: ```bash -$ helm upgrade -i uikubedbcom-proxysqlinsight-editor appscode/uikubedbcom-proxysqlinsight-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-proxysqlinsight-editor appscode/uikubedbcom-proxysqlinsight-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProxySQLInsight Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-proxys Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-proxysqlinsight-editor appscode/uikubedbcom-proxysqlinsight-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-proxysqlinsight-editor appscode/uikubedbcom-proxysqlinsight-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-proxysqlinsight-editor appscode/uikubedbcom-proxysqlinsight-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-proxysqlinsight-editor appscode/uikubedbcom-proxysqlinsight-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-proxysqlqueries-editor/Chart.yaml b/charts/uikubedbcom-proxysqlqueries-editor/Chart.yaml index 746458690b..5de05bc25b 100644 --- a/charts/uikubedbcom-proxysqlqueries-editor/Chart.yaml +++ b/charts/uikubedbcom-proxysqlqueries-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"proxysqlqueries"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProxySQLQueries Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-proxysqlqueries-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-proxysqlqueries-editor/README.md b/charts/uikubedbcom-proxysqlqueries-editor/README.md index 04ff3af213..c083d0c0ea 100644 --- a/charts/uikubedbcom-proxysqlqueries-editor/README.md +++ b/charts/uikubedbcom-proxysqlqueries-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-proxysqlqueries-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-proxysqlqueries-editor appscode/uikubedbcom-proxysqlqueries-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-proxysqlqueries-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-proxysqlqueries-editor appscode/uikubedbcom-proxysqlqueries-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQLQueries Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `uikubedbcom-proxysqlqueries-editor`: ```bash -$ helm upgrade -i uikubedbcom-proxysqlqueries-editor appscode/uikubedbcom-proxysqlqueries-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-proxysqlqueries-editor appscode/uikubedbcom-proxysqlqueries-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProxySQLQueries Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-proxys Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-proxysqlqueries-editor appscode/uikubedbcom-proxysqlqueries-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-proxysqlqueries-editor appscode/uikubedbcom-proxysqlqueries-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-proxysqlqueries-editor appscode/uikubedbcom-proxysqlqueries-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-proxysqlqueries-editor appscode/uikubedbcom-proxysqlqueries-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-proxysqlsettings-editor/Chart.yaml b/charts/uikubedbcom-proxysqlsettings-editor/Chart.yaml index f0169f3e12..f9106edd9e 100644 --- a/charts/uikubedbcom-proxysqlsettings-editor/Chart.yaml +++ b/charts/uikubedbcom-proxysqlsettings-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"proxysqlsettings"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ProxySQLSettings Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-proxysqlsettings-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-proxysqlsettings-editor/README.md b/charts/uikubedbcom-proxysqlsettings-editor/README.md index 3633e07186..ca79708ed8 100644 --- a/charts/uikubedbcom-proxysqlsettings-editor/README.md +++ b/charts/uikubedbcom-proxysqlsettings-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-proxysqlsettings-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-proxysqlsettings-editor appscode/uikubedbcom-proxysqlsettings-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-proxysqlsettings-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-proxysqlsettings-editor appscode/uikubedbcom-proxysqlsettings-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQLSettings Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `uikubedbcom-proxysqlsettings-editor`: ```bash -$ helm upgrade -i uikubedbcom-proxysqlsettings-editor appscode/uikubedbcom-proxysqlsettings-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-proxysqlsettings-editor appscode/uikubedbcom-proxysqlsettings-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ProxySQLSettings Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-proxys Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-proxysqlsettings-editor appscode/uikubedbcom-proxysqlsettings-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-proxysqlsettings-editor appscode/uikubedbcom-proxysqlsettings-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-proxysqlsettings-editor appscode/uikubedbcom-proxysqlsettings-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-proxysqlsettings-editor appscode/uikubedbcom-proxysqlsettings-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-redisinsight-editor/Chart.yaml b/charts/uikubedbcom-redisinsight-editor/Chart.yaml index bf0896ffd4..ab3f073525 100644 --- a/charts/uikubedbcom-redisinsight-editor/Chart.yaml +++ b/charts/uikubedbcom-redisinsight-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"redisinsights"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RedisInsight Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-redisinsight-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-redisinsight-editor/README.md b/charts/uikubedbcom-redisinsight-editor/README.md index 5a5ebf1199..3b4ddf5529 100644 --- a/charts/uikubedbcom-redisinsight-editor/README.md +++ b/charts/uikubedbcom-redisinsight-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-redisinsight-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-redisinsight-editor appscode/uikubedbcom-redisinsight-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-redisinsight-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-redisinsight-editor appscode/uikubedbcom-redisinsight-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisInsight Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `uikubedbcom-redisinsight-editor`: ```bash -$ helm upgrade -i uikubedbcom-redisinsight-editor appscode/uikubedbcom-redisinsight-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-redisinsight-editor appscode/uikubedbcom-redisinsight-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RedisInsight Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-redisi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-redisinsight-editor appscode/uikubedbcom-redisinsight-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-redisinsight-editor appscode/uikubedbcom-redisinsight-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-redisinsight-editor appscode/uikubedbcom-redisinsight-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-redisinsight-editor appscode/uikubedbcom-redisinsight-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-redisqueries-editor/Chart.yaml b/charts/uikubedbcom-redisqueries-editor/Chart.yaml index 696883789a..85ef55a87f 100644 --- a/charts/uikubedbcom-redisqueries-editor/Chart.yaml +++ b/charts/uikubedbcom-redisqueries-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"redisqueries"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RedisQueries Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-redisqueries-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-redisqueries-editor/README.md b/charts/uikubedbcom-redisqueries-editor/README.md index 3c4f9aeab0..b96842cf1a 100644 --- a/charts/uikubedbcom-redisqueries-editor/README.md +++ b/charts/uikubedbcom-redisqueries-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-redisqueries-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-redisqueries-editor appscode/uikubedbcom-redisqueries-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-redisqueries-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-redisqueries-editor appscode/uikubedbcom-redisqueries-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisQueries Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `uikubedbcom-redisqueries-editor`: ```bash -$ helm upgrade -i uikubedbcom-redisqueries-editor appscode/uikubedbcom-redisqueries-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-redisqueries-editor appscode/uikubedbcom-redisqueries-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RedisQueries Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-redisq Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-redisqueries-editor appscode/uikubedbcom-redisqueries-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-redisqueries-editor appscode/uikubedbcom-redisqueries-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-redisqueries-editor appscode/uikubedbcom-redisqueries-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-redisqueries-editor appscode/uikubedbcom-redisqueries-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-redisschemaoverview-editor/Chart.yaml b/charts/uikubedbcom-redisschemaoverview-editor/Chart.yaml index 71b62a72ba..0eea4ef699 100644 --- a/charts/uikubedbcom-redisschemaoverview-editor/Chart.yaml +++ b/charts/uikubedbcom-redisschemaoverview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"redisschemaoverviews"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: RedisSchemaOverview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-redisschemaoverview-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uikubedbcom-redisschemaoverview-editor/README.md b/charts/uikubedbcom-redisschemaoverview-editor/README.md index aa1599ceb7..54d16c7c0f 100644 --- a/charts/uikubedbcom-redisschemaoverview-editor/README.md +++ b/charts/uikubedbcom-redisschemaoverview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-redisschemaoverview-editor --version=v0.38.0 -$ helm upgrade -i uikubedbcom-redisschemaoverview-editor appscode/uikubedbcom-redisschemaoverview-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uikubedbcom-redisschemaoverview-editor --version=v0.39.0 +$ helm upgrade -i uikubedbcom-redisschemaoverview-editor appscode/uikubedbcom-redisschemaoverview-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisSchemaOverview Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `uikubedbcom-redisschemaoverview-editor`: ```bash -$ helm upgrade -i uikubedbcom-redisschemaoverview-editor appscode/uikubedbcom-redisschemaoverview-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uikubedbcom-redisschemaoverview-editor appscode/uikubedbcom-redisschemaoverview-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a RedisSchemaOverview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-rediss Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-redisschemaoverview-editor appscode/uikubedbcom-redisschemaoverview-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-redisschemaoverview-editor appscode/uikubedbcom-redisschemaoverview-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-redisschemaoverview-editor appscode/uikubedbcom-redisschemaoverview-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uikubedbcom-redisschemaoverview-editor appscode/uikubedbcom-redisschemaoverview-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/uistashappscodecom-backupoverview-editor/Chart.yaml b/charts/uistashappscodecom-backupoverview-editor/Chart.yaml index 03e4f3589e..d1d3da4e7c 100644 --- a/charts/uistashappscodecom-backupoverview-editor/Chart.yaml +++ b/charts/uistashappscodecom-backupoverview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.stash.appscode.com","version":"v1alpha1","resource":"backupoverviews"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: BackupOverview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uistashappscodecom-backupoverview-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/uistashappscodecom-backupoverview-editor/README.md b/charts/uistashappscodecom-backupoverview-editor/README.md index 06413bdd01..212c1e2043 100644 --- a/charts/uistashappscodecom-backupoverview-editor/README.md +++ b/charts/uistashappscodecom-backupoverview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uistashappscodecom-backupoverview-editor --version=v0.38.0 -$ helm upgrade -i uistashappscodecom-backupoverview-editor appscode/uistashappscodecom-backupoverview-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/uistashappscodecom-backupoverview-editor --version=v0.39.0 +$ helm upgrade -i uistashappscodecom-backupoverview-editor appscode/uistashappscodecom-backupoverview-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupOverview Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `uistashappscodecom-backupoverview-editor`: ```bash -$ helm upgrade -i uistashappscodecom-backupoverview-editor appscode/uistashappscodecom-backupoverview-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i uistashappscodecom-backupoverview-editor appscode/uistashappscodecom-backupoverview-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a BackupOverview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uistashappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uistashappscodecom-backupoverview-editor appscode/uistashappscodecom-backupoverview-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=ui.stash.appscode.com/v1alpha1 +$ helm upgrade -i uistashappscodecom-backupoverview-editor appscode/uistashappscodecom-backupoverview-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=ui.stash.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uistashappscodecom-backupoverview-editor appscode/uistashappscodecom-backupoverview-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i uistashappscodecom-backupoverview-editor appscode/uistashappscodecom-backupoverview-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/virtualsecretsdev-secret-editor/Chart.yaml b/charts/virtualsecretsdev-secret-editor/Chart.yaml index 63e61d2031..9711e8d014 100644 --- a/charts/virtualsecretsdev-secret-editor/Chart.yaml +++ b/charts/virtualsecretsdev-secret-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"virtual-secrets.dev","version":"v1alpha1","resource":"secrets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Secret Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: virtualsecretsdev-secret-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/virtualsecretsdev-secret-editor/README.md b/charts/virtualsecretsdev-secret-editor/README.md index 103aefff68..5d42f41cf3 100644 --- a/charts/virtualsecretsdev-secret-editor/README.md +++ b/charts/virtualsecretsdev-secret-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/virtualsecretsdev-secret-editor --version=v0.38.0 -$ helm upgrade -i virtualsecretsdev-secret-editor appscode/virtualsecretsdev-secret-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/virtualsecretsdev-secret-editor --version=v0.39.0 +$ helm upgrade -i virtualsecretsdev-secret-editor appscode/virtualsecretsdev-secret-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Secret Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `virtualsecretsdev-secret-editor`: ```bash -$ helm upgrade -i virtualsecretsdev-secret-editor appscode/virtualsecretsdev-secret-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i virtualsecretsdev-secret-editor appscode/virtualsecretsdev-secret-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Secret Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `virtualsecretsdev- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i virtualsecretsdev-secret-editor appscode/virtualsecretsdev-secret-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=virtual-secrets.dev/v1alpha1 +$ helm upgrade -i virtualsecretsdev-secret-editor appscode/virtualsecretsdev-secret-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=virtual-secrets.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i virtualsecretsdev-secret-editor appscode/virtualsecretsdev-secret-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i virtualsecretsdev-secret-editor appscode/virtualsecretsdev-secret-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/virtualsecretsdev-secretmount-editor/Chart.yaml b/charts/virtualsecretsdev-secretmount-editor/Chart.yaml index 328c911d43..8ebb9be3b7 100644 --- a/charts/virtualsecretsdev-secretmount-editor/Chart.yaml +++ b/charts/virtualsecretsdev-secretmount-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"virtual-secrets.dev","version":"v1alpha1","resource":"secretmounts"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: SecretMount Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: virtualsecretsdev-secretmount-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/virtualsecretsdev-secretmount-editor/README.md b/charts/virtualsecretsdev-secretmount-editor/README.md index 9fba7308bd..ab02968ae3 100644 --- a/charts/virtualsecretsdev-secretmount-editor/README.md +++ b/charts/virtualsecretsdev-secretmount-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/virtualsecretsdev-secretmount-editor --version=v0.38.0 -$ helm upgrade -i virtualsecretsdev-secretmount-editor appscode/virtualsecretsdev-secretmount-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/virtualsecretsdev-secretmount-editor --version=v0.39.0 +$ helm upgrade -i virtualsecretsdev-secretmount-editor appscode/virtualsecretsdev-secretmount-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecretMount Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `virtualsecretsdev-secretmount-editor`: ```bash -$ helm upgrade -i virtualsecretsdev-secretmount-editor appscode/virtualsecretsdev-secretmount-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i virtualsecretsdev-secretmount-editor appscode/virtualsecretsdev-secretmount-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a SecretMount Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `virtualsecretsdev- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i virtualsecretsdev-secretmount-editor appscode/virtualsecretsdev-secretmount-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=virtual-secrets.dev/v1alpha1 +$ helm upgrade -i virtualsecretsdev-secretmount-editor appscode/virtualsecretsdev-secretmount-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=virtual-secrets.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i virtualsecretsdev-secretmount-editor appscode/virtualsecretsdev-secretmount-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i virtualsecretsdev-secretmount-editor appscode/virtualsecretsdev-secretmount-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/voyagerappscodecom-certificate-editor/Chart.yaml b/charts/voyagerappscodecom-certificate-editor/Chart.yaml index 77aa6ad3d8..1edf898169 100644 --- a/charts/voyagerappscodecom-certificate-editor/Chart.yaml +++ b/charts/voyagerappscodecom-certificate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"voyager.appscode.com","version":"v1beta1","resource":"certificates"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Certificate Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: voyagerappscodecom-certificate-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/voyagerappscodecom-certificate-editor/README.md b/charts/voyagerappscodecom-certificate-editor/README.md index 5003f007a4..92a35685b2 100644 --- a/charts/voyagerappscodecom-certificate-editor/README.md +++ b/charts/voyagerappscodecom-certificate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/voyagerappscodecom-certificate-editor --version=v0.38.0 -$ helm upgrade -i voyagerappscodecom-certificate-editor appscode/voyagerappscodecom-certificate-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/voyagerappscodecom-certificate-editor --version=v0.39.0 +$ helm upgrade -i voyagerappscodecom-certificate-editor appscode/voyagerappscodecom-certificate-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Certificate Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `voyagerappscodecom-certificate-editor`: ```bash -$ helm upgrade -i voyagerappscodecom-certificate-editor appscode/voyagerappscodecom-certificate-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i voyagerappscodecom-certificate-editor appscode/voyagerappscodecom-certificate-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Certificate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `voyagerappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i voyagerappscodecom-certificate-editor appscode/voyagerappscodecom-certificate-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=voyager.appscode.com/v1beta1 +$ helm upgrade -i voyagerappscodecom-certificate-editor appscode/voyagerappscodecom-certificate-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=voyager.appscode.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i voyagerappscodecom-certificate-editor appscode/voyagerappscodecom-certificate-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i voyagerappscodecom-certificate-editor appscode/voyagerappscodecom-certificate-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/voyagerappscodecom-ingress-editor/Chart.yaml b/charts/voyagerappscodecom-ingress-editor/Chart.yaml index 3d6ed05947..3d7f7ac751 100644 --- a/charts/voyagerappscodecom-ingress-editor/Chart.yaml +++ b/charts/voyagerappscodecom-ingress-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"voyager.appscode.com","version":"v1","resource":"ingresses"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: Ingress Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: voyagerappscodecom-ingress-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/voyagerappscodecom-ingress-editor/README.md b/charts/voyagerappscodecom-ingress-editor/README.md index 2afca79cf5..d19ca655de 100644 --- a/charts/voyagerappscodecom-ingress-editor/README.md +++ b/charts/voyagerappscodecom-ingress-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/voyagerappscodecom-ingress-editor --version=v0.38.0 -$ helm upgrade -i voyagerappscodecom-ingress-editor appscode/voyagerappscodecom-ingress-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/voyagerappscodecom-ingress-editor --version=v0.39.0 +$ helm upgrade -i voyagerappscodecom-ingress-editor appscode/voyagerappscodecom-ingress-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Ingress Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `voyagerappscodecom-ingress-editor`: ```bash -$ helm upgrade -i voyagerappscodecom-ingress-editor appscode/voyagerappscodecom-ingress-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i voyagerappscodecom-ingress-editor appscode/voyagerappscodecom-ingress-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a Ingress Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `voyagerappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i voyagerappscodecom-ingress-editor appscode/voyagerappscodecom-ingress-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=voyager.appscode.com/v1 +$ helm upgrade -i voyagerappscodecom-ingress-editor appscode/voyagerappscodecom-ingress-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=voyager.appscode.com/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i voyagerappscodecom-ingress-editor appscode/voyagerappscodecom-ingress-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i voyagerappscodecom-ingress-editor appscode/voyagerappscodecom-ingress-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/workopenclustermanagementio-appliedmanifestwork-editor/Chart.yaml b/charts/workopenclustermanagementio-appliedmanifestwork-editor/Chart.yaml index 1c23a78b47..d5ca12f3c8 100644 --- a/charts/workopenclustermanagementio-appliedmanifestwork-editor/Chart.yaml +++ b/charts/workopenclustermanagementio-appliedmanifestwork-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"work.open-cluster-management.io","version":"v1","resource":"appliedmanifestworks"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: AppliedManifestWork Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: workopenclustermanagementio-appliedmanifestwork-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/workopenclustermanagementio-appliedmanifestwork-editor/README.md b/charts/workopenclustermanagementio-appliedmanifestwork-editor/README.md index fc0688775c..5419a438e3 100644 --- a/charts/workopenclustermanagementio-appliedmanifestwork-editor/README.md +++ b/charts/workopenclustermanagementio-appliedmanifestwork-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/workopenclustermanagementio-appliedmanifestwork-editor --version=v0.38.0 -$ helm upgrade -i workopenclustermanagementio-appliedmanifestwork-editor appscode/workopenclustermanagementio-appliedmanifestwork-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/workopenclustermanagementio-appliedmanifestwork-editor --version=v0.39.0 +$ helm upgrade -i workopenclustermanagementio-appliedmanifestwork-editor appscode/workopenclustermanagementio-appliedmanifestwork-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AppliedManifestWork Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `workopenclustermanagementio-appliedmanifestwork-editor`: ```bash -$ helm upgrade -i workopenclustermanagementio-appliedmanifestwork-editor appscode/workopenclustermanagementio-appliedmanifestwork-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i workopenclustermanagementio-appliedmanifestwork-editor appscode/workopenclustermanagementio-appliedmanifestwork-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a AppliedManifestWork Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `workopenclusterman Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i workopenclustermanagementio-appliedmanifestwork-editor appscode/workopenclustermanagementio-appliedmanifestwork-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=work.open-cluster-management.io/v1 +$ helm upgrade -i workopenclustermanagementio-appliedmanifestwork-editor appscode/workopenclustermanagementio-appliedmanifestwork-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=work.open-cluster-management.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i workopenclustermanagementio-appliedmanifestwork-editor appscode/workopenclustermanagementio-appliedmanifestwork-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i workopenclustermanagementio-appliedmanifestwork-editor appscode/workopenclustermanagementio-appliedmanifestwork-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/workopenclustermanagementio-manifestwork-editor/Chart.yaml b/charts/workopenclustermanagementio-manifestwork-editor/Chart.yaml index 955bd0faca..d2ab752337 100644 --- a/charts/workopenclustermanagementio-manifestwork-editor/Chart.yaml +++ b/charts/workopenclustermanagementio-manifestwork-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"work.open-cluster-management.io","version":"v1","resource":"manifestworks"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ManifestWork Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: workopenclustermanagementio-manifestwork-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/workopenclustermanagementio-manifestwork-editor/README.md b/charts/workopenclustermanagementio-manifestwork-editor/README.md index 1f6e80fb63..cdc5ea8b22 100644 --- a/charts/workopenclustermanagementio-manifestwork-editor/README.md +++ b/charts/workopenclustermanagementio-manifestwork-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/workopenclustermanagementio-manifestwork-editor --version=v0.38.0 -$ helm upgrade -i workopenclustermanagementio-manifestwork-editor appscode/workopenclustermanagementio-manifestwork-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/workopenclustermanagementio-manifestwork-editor --version=v0.39.0 +$ helm upgrade -i workopenclustermanagementio-manifestwork-editor appscode/workopenclustermanagementio-manifestwork-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManifestWork Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `workopenclustermanagementio-manifestwork-editor`: ```bash -$ helm upgrade -i workopenclustermanagementio-manifestwork-editor appscode/workopenclustermanagementio-manifestwork-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i workopenclustermanagementio-manifestwork-editor appscode/workopenclustermanagementio-manifestwork-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ManifestWork Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `workopenclusterman Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i workopenclustermanagementio-manifestwork-editor appscode/workopenclustermanagementio-manifestwork-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=work.open-cluster-management.io/v1 +$ helm upgrade -i workopenclustermanagementio-manifestwork-editor appscode/workopenclustermanagementio-manifestwork-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=work.open-cluster-management.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i workopenclustermanagementio-manifestwork-editor appscode/workopenclustermanagementio-manifestwork-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i workopenclustermanagementio-manifestwork-editor appscode/workopenclustermanagementio-manifestwork-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ``` diff --git a/charts/workopenclustermanagementio-manifestworkreplicaset-editor/Chart.yaml b/charts/workopenclustermanagementio-manifestworkreplicaset-editor/Chart.yaml index c6dc2153bf..82569a854f 100644 --- a/charts/workopenclustermanagementio-manifestworkreplicaset-editor/Chart.yaml +++ b/charts/workopenclustermanagementio-manifestworkreplicaset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"work.open-cluster-management.io","version":"v1alpha1","resource":"manifestworkreplicasets"}' apiVersion: v2 -appVersion: v0.38.0 +appVersion: v0.39.0 description: ManifestWorkReplicaSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: workopenclustermanagementio-manifestworkreplicaset-editor type: application -version: v0.38.0 +version: v0.39.0 diff --git a/charts/workopenclustermanagementio-manifestworkreplicaset-editor/README.md b/charts/workopenclustermanagementio-manifestworkreplicaset-editor/README.md index 3d3609ade1..2f55f6e43f 100644 --- a/charts/workopenclustermanagementio-manifestworkreplicaset-editor/README.md +++ b/charts/workopenclustermanagementio-manifestworkreplicaset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/workopenclustermanagementio-manifestworkreplicaset-editor --version=v0.38.0 -$ helm upgrade -i workopenclustermanagementio-manifestworkreplicaset-editor appscode/workopenclustermanagementio-manifestworkreplicaset-editor -n default --create-namespace --version=v0.38.0 +$ helm search repo appscode/workopenclustermanagementio-manifestworkreplicaset-editor --version=v0.39.0 +$ helm upgrade -i workopenclustermanagementio-manifestworkreplicaset-editor appscode/workopenclustermanagementio-manifestworkreplicaset-editor -n default --create-namespace --version=v0.39.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManifestWorkReplicaSet Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `workopenclustermanagementio-manifestworkreplicaset-editor`: ```bash -$ helm upgrade -i workopenclustermanagementio-manifestworkreplicaset-editor appscode/workopenclustermanagementio-manifestworkreplicaset-editor -n default --create-namespace --version=v0.38.0 +$ helm upgrade -i workopenclustermanagementio-manifestworkreplicaset-editor appscode/workopenclustermanagementio-manifestworkreplicaset-editor -n default --create-namespace --version=v0.39.0 ``` The command deploys a ManifestWorkReplicaSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `workopenclusterman Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i workopenclustermanagementio-manifestworkreplicaset-editor appscode/workopenclustermanagementio-manifestworkreplicaset-editor -n default --create-namespace --version=v0.38.0 --set apiVersion=work.open-cluster-management.io/v1alpha1 +$ helm upgrade -i workopenclustermanagementio-manifestworkreplicaset-editor appscode/workopenclustermanagementio-manifestworkreplicaset-editor -n default --create-namespace --version=v0.39.0 --set apiVersion=work.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i workopenclustermanagementio-manifestworkreplicaset-editor appscode/workopenclustermanagementio-manifestworkreplicaset-editor -n default --create-namespace --version=v0.38.0 --values values.yaml +$ helm upgrade -i workopenclustermanagementio-manifestworkreplicaset-editor appscode/workopenclustermanagementio-manifestworkreplicaset-editor -n default --create-namespace --version=v0.39.0 --values values.yaml ```