diff --git a/UnrealFolder/ProjectMobius/Source/MobiusCore/Private/Components/FlowCounterSpawnerComponent.cpp b/UnrealFolder/ProjectMobius/Source/MobiusCore/Private/Components/FlowCounterSpawnerComponent.cpp index 3ea99599c..f00e15156 100644 --- a/UnrealFolder/ProjectMobius/Source/MobiusCore/Private/Components/FlowCounterSpawnerComponent.cpp +++ b/UnrealFolder/ProjectMobius/Source/MobiusCore/Private/Components/FlowCounterSpawnerComponent.cpp @@ -142,18 +142,11 @@ void UFlowCounterSpawnerComponent::TickComponent(float DeltaTime, ELevelTick Tic if (!bSpawning || PendingDoorMeshes.Num() == 0) return; - - // Check frame time throttle to avoid spawning when the game is struggling - float FrameTime = DeltaTime * 1000.0f; // ms - if (FrameTime > 25.0f) - { - // Skip this batch - system under load - LogToCustomLogger(FString::Printf(TEXT("TickComponent skipped spawning due to frame time %.2fms; pending doors: %d"), - FrameTime, PendingDoorMeshes.Num())); - return; - } - // Check TIME throttle (not frame throttle) + // Pace by wall-clock time only, never by frame time. This used to skip every frame slower than 25 ms, + // but ARuntimeMeshBuilder::DecideAndExecuteSpawnStrategy picks this batched path precisely when FPS is + // at or below 40, so on a slow (or thermally throttled) machine the queue could stop draining for good + // and leave the loading card up. A slow frame now only shortens the batch, via BatchTimeBudgetMs. const double Now = FPlatformTime::Seconds(); if (Now - LastSpawnTime < SpawnInterval) return; @@ -161,9 +154,16 @@ void UFlowCounterSpawnerComponent::TickComponent(float DeltaTime, ELevelTick Tic LastSpawnTime = Now; int32 SpawnedThisBatch = 0; + const double BatchDeadline = Now + BatchTimeBudgetMs / 1000.0; while (PendingDoorMeshes.Num() > 0 && SpawnedThisBatch < MaxPerBatch) { + // At least one per batch, however long it takes, so progress is guaranteed at any frame rate. + if (SpawnedThisBatch > 0 && FPlatformTime::Seconds() > BatchDeadline) + { + break; + } + const FPendingDoorEntry PendingDoor = PendingDoorMeshes[0]; PendingDoorMeshes.RemoveAtSwap(0); diff --git a/UnrealFolder/ProjectMobius/Source/MobiusCore/Private/Subsystems/PerformanceUtilSubsystem.cpp b/UnrealFolder/ProjectMobius/Source/MobiusCore/Private/Subsystems/PerformanceUtilSubsystem.cpp index 716e74c6f..7d983dedc 100644 --- a/UnrealFolder/ProjectMobius/Source/MobiusCore/Private/Subsystems/PerformanceUtilSubsystem.cpp +++ b/UnrealFolder/ProjectMobius/Source/MobiusCore/Private/Subsystems/PerformanceUtilSubsystem.cpp @@ -11,8 +11,33 @@ #include "RHI.h" #include "Subsystems/MobiusCustomLoggerSubsystem.h" #include "Engine/Engine.h" +#include "Engine/GameViewportClient.h" #include "Engine/World.h" +#include "HAL/IConsoleManager.h" #include "UserConfig/UserProjectSettings.h" +#include "Widgets/SWindow.h" + +static TAutoConsoleVariable CVarMobiusMinimisedMaxFPS( + TEXT("Mobius.Perf.MinimisedMaxFPS"), + 5.0f, + TEXT("Frame-rate cap while the packaged / -game window is minimised; t.MaxFPS is restored when it is restored.\n") + TEXT("0 disables the cap. The editor and PIE are never capped."), + ECVF_Default); + +namespace +{ + bool IsGameWindowMinimised() + { + if (GEngine && GEngine->GameViewport) + { + if (const TSharedPtr Window = GEngine->GameViewport->GetWindow()) + { + return Window->IsWindowMinimized(); + } + } + return false; + } +} // Heavy render-feature cvar tables per render tier (task C1). Each entry documents what it gates and // the per-tier value. Returned as "name=value" strings for ApplyConsoleCommands (-> ECVF_SetByCode). @@ -135,6 +160,13 @@ void UPerformanceUtilSubsystem::Deinitialize() CurrentRenderTier = ERpt_High; } + // t.MaxFPS is process-wide, so never leave the minimised cap behind on a world teardown. + if (bMinimisedFrameCapActive && GEngine) + { + GEngine->SetMaxFPS(FPSBeforeMinimise); + bMinimisedFrameCapActive = false; + } + // Clean up any resources or delegates here if needed if (ProjectSettings) { @@ -159,11 +191,48 @@ void UPerformanceUtilSubsystem::Tick(float DeltaTime) { Super::Tick(DeltaTime); + UpdateMinimisedFrameCap(); + // Calculate the current FPS based on DeltaTime CalculateCurrentFPS(DeltaTime); CheckCurrentFPS(); } +void UPerformanceUtilSubsystem::UpdateMinimisedFrameCap() +{ + // Packaged and -game only. The editor deliberately keeps full rate when it is not in front + // (Config/DefaultEditorSettings.ini), and PIE shares the editor process. + if (GIsEditor || !GEngine) + { + return; + } + + const float CapFPS = CVarMobiusMinimisedMaxFPS.GetValueOnGameThread(); + const bool bWantCap = CapFPS > 0.0f && IsGameWindowMinimised(); + if (bWantCap == bMinimisedFrameCapActive) + { + return; + } + + if (bWantCap) + { + FPSBeforeMinimise = GEngine->GetMaxFPS(); + GEngine->SetMaxFPS(CapFPS); + } + else + { + GEngine->SetMaxFPS(FPSBeforeMinimise); + } + bMinimisedFrameCapActive = bWantCap; + + if (UMobiusCustomLoggerSubsystem* StartupLogger = GEngine->GetEngineSubsystem()) + { + StartupLogger->EnqueueLogMessage(bWantCap + ? FString::Printf(TEXT("Window minimised: frame rate capped at %.0f FPS (was %.0f)"), CapFPS, FPSBeforeMinimise) + : FString::Printf(TEXT("Window restored: frame-rate limit back to %.0f FPS"), FPSBeforeMinimise)); + } +} + static bool ParseCVarString(const FString& InString, FString& OutName, FString& OutValue) { // Split only on the first �=� @@ -228,7 +297,13 @@ void UPerformanceUtilSubsystem::CalculateCurrentFPS(float DeltaTime) if (DeltaTime > 0.0f) { CurrentFPS = 1.0f / DeltaTime; - SmoothedFPS = FMath::Lerp(SmoothedFPS, CurrentFPS, 0.1f); + + // Minimised frames run under the minimised frame cap and say nothing about real performance; keep + // them out of the average so restoring the window does not read as a sudden low-FPS spell. + if (!IsGameWindowMinimised()) + { + SmoothedFPS = FMath::Lerp(SmoothedFPS, CurrentFPS, 0.1f); + } } } @@ -615,6 +690,10 @@ void UPerformanceUtilSubsystem::ApplyOptimizationsBasedOnFPS() // set the avatar model type to low spec CurrentAvatarModelType = EPss_Low; + // Latch until FPS recovers (see CheckCurrentFPS). The user can still switch the avatar model back + // by hand (UAdjustAvatarModel), and this will not immediately undo that. + bLowFPSOptimisationApplied = true; + // Notify listeners that auto scalability has changed OnAutoScalabilityChanged.Broadcast(); @@ -628,9 +707,24 @@ void UPerformanceUtilSubsystem::ApplyOptimizationsBasedOnFPS() //TODO: Our check for FPS is simplistic and only checks if the FPS is below a threshold. - we may want a range tolerance as well void UPerformanceUtilSubsystem::CheckCurrentFPS() { - if (CurrentFPS <= LowFPSThreshold) + // A minimised window renders nothing worth judging, and runs under the minimised frame cap, so it + // must neither arm the watchdog nor let an armed one fire. + if (IsGameWindowMinimised()) + { + if (AutoScalabilityTimerHandle.IsValid()) + { + GetWorld()->GetTimerManager().ClearTimer(AutoScalabilityTimerHandle); + AutoScalabilityTimerHandle.Invalidate(); + } + return; + } + + // Smoothed, not instantaneous: one long frame (a load hitch) is not a sustained drop. + if (SmoothedFPS <= LowFPSThreshold) { - if (!AutoScalabilityTimerHandle.IsValid()) + // Once per low-FPS episode. This used to re-arm straight after firing, so a machine that stayed + // slow re-applied the optimisation and logged two lines every 10 s indefinitely. + if (!bLowFPSOptimisationApplied && !AutoScalabilityTimerHandle.IsValid()) { // Start the timer to trigger auto scalability adjustments GetWorld()->GetTimerManager().SetTimer(AutoScalabilityTimerHandle, this, @@ -642,10 +736,12 @@ void UPerformanceUtilSubsystem::CheckCurrentFPS() } } } - else + else if (SmoothedFPS > LowFPSThreshold + 5.0f) // 5 FPS of hysteresis { - // if we have hit the low FPS threshold and the timer is valid, we clear it, provided the FPS has improved by our tolerance - if (AutoScalabilityTimerHandle.IsValid() && CurrentFPS > LowFPSThreshold + 5.0f)// Adding a tolerance of 5 FPS + // Recovered: a later sustained drop may fire again. + bLowFPSOptimisationApplied = false; + + if (AutoScalabilityTimerHandle.IsValid()) { GetWorld()->GetTimerManager().ClearTimer(AutoScalabilityTimerHandle); AutoScalabilityTimerHandle.Invalidate(); diff --git a/UnrealFolder/ProjectMobius/Source/MobiusCore/Public/Components/FlowCounterSpawnerComponent.h b/UnrealFolder/ProjectMobius/Source/MobiusCore/Public/Components/FlowCounterSpawnerComponent.h index ad0d392b3..2b47ced36 100644 --- a/UnrealFolder/ProjectMobius/Source/MobiusCore/Public/Components/FlowCounterSpawnerComponent.h +++ b/UnrealFolder/ProjectMobius/Source/MobiusCore/Public/Components/FlowCounterSpawnerComponent.h @@ -36,7 +36,7 @@ class MOBIUSCORE_API UFlowCounterSpawnerComponent : public UActorComponent // called by owner when all doors discovered void BeginSpawning(); - // bypass frame-budget throttle — call after load spikes to finish remaining spawns immediately + // bypass the batch pacing — call after load spikes to finish remaining spawns immediately void FlushRemainingSpawns(); // cancel in-progress spawning and discard all queued doors — call before a new load replaces the mesh @@ -47,7 +47,14 @@ class MOBIUSCORE_API UFlowCounterSpawnerComponent : public UActorComponent UPROPERTY(EditAnywhere) float SpawnInterval = 0.25f; - + + /** + * Wall-clock budget for one batch, in milliseconds. A batch stops early once it has used this much, + * but always spawns at least one door, so the queue drains at any frame rate. + */ + UPROPERTY(EditAnywhere) + float BatchTimeBudgetMs = 4.0f; + UPROPERTY(EditAnywhere, BlueprintAssignable, Category = "MeshGenerator|Delegates") FOnFlowCounterSpawned OnFlowCounterAutoSpawned; diff --git a/UnrealFolder/ProjectMobius/Source/MobiusCore/Public/Subsystems/PerformanceUtilSubsystem.h b/UnrealFolder/ProjectMobius/Source/MobiusCore/Public/Subsystems/PerformanceUtilSubsystem.h index 49906d8e4..fd2fc5d09 100644 --- a/UnrealFolder/ProjectMobius/Source/MobiusCore/Public/Subsystems/PerformanceUtilSubsystem.h +++ b/UnrealFolder/ProjectMobius/Source/MobiusCore/Public/Subsystems/PerformanceUtilSubsystem.h @@ -198,6 +198,20 @@ class MOBIUSCORE_API UPerformanceUtilSubsystem : public UTickableWorldSubsystem */ void CheckCurrentFPS(); + /** + * Packaged / -game only: cap the frame rate while the window is minimised (Mobius.Perf.MinimisedMaxFPS) + * and restore the previous t.MaxFPS when it is restored. Nothing on screen needs 120 FPS while + * minimised, and an hour of full-rate rendering behind a minimised window heats the machine for nothing. + */ + void UpdateMinimisedFrameCap(); + + /** Set once the low-FPS watchdog has fired; it stays quiet until FPS recovers instead of re-firing every 10 s. */ + bool bLowFPSOptimisationApplied = false; + + /** True while the minimised frame cap is in force; FPSBeforeMinimise is what t.MaxFPS returns to afterwards. */ + bool bMinimisedFrameCapActive = false; + float FPSBeforeMinimise = 0.0f; + /** * Called from the low-FPS watchdog (ApplyOptimizationsBasedOnFPS). Intentionally a no-op for the * render tier: C1 is startup hardware-detect + the C2 override only, NOT FPS-driven runtime diff --git a/docs/TECH-DEBT.md b/docs/TECH-DEBT.md index 1d1a0ad6e..23cf38992 100644 --- a/docs/TECH-DEBT.md +++ b/docs/TECH-DEBT.md @@ -2,7 +2,7 @@ > Auto-generated by [todo-tracker.yml](../.github/workflows/todo-tracker.yml) — updated weekly and on source changes. -**Generated:** 2026-10-21 23:31 UTC +**Generated:** 2026-10-22 02:47 UTC ## Summary @@ -43,39 +43,61 @@ - Line 54: `// TODO (owner ruling 2026-08-03, deferred for deadline): this drives the SUBSYSTEM directly -- it sets` **ProjectMobiusTests/Private/Tests/TrajectoryHeatmapInGameTest.cpp** - Line 51: `// TODO (owner ruling 2026-08-03, carried over from the pre-rewrite file, still true): every scenario here` -**MobiusWidgets/Private/Slate/Components/SFieldAndTitleText.cpp** -- Line 260: `// TODO: add in padding if needed` -**MobiusWidgets/Private/Slate/Components/SAgentFollowIndicator.cpp** -- Line 68: `//TODO: need to do this once, likely store a variable and check for nullptr` -- Line 138: `// TODO: we can improve this to be the only SMeshWidget, we just need to figure out how to handle the different textures for each instance` -**MobiusWidgets/Private/Slate/Components/SWindowTitleBarWidget.cpp** -- Line 123: `// TODO: Investigate further why calling the parent implementation here seems to cause issues.` -**MobiusWidgets/Private/Slate/Components/SPedestrianAgentHoverMeshWidget.cpp** -- Line 158: `// TODO: we should add small white placeholder text like ---` -**MobiusWidgets/Private/UI/MobiusSettingPanel.cpp** -- Line 40: `// TODO:` -**MobiusWidgets/Private/UI/Components/FloorStatsWidget.cpp** -- Line 629: `// TODO: currently we have a limitation for updates that are sent to the overlay,` +**Visualization/Private/DynamicPixelRenderingTexture.cpp** +- Line 72: `// Level of Service Colors for each band - in linear color format TODO: this needs to be a parameter` +- Line 106: `//TODO: add extra parameters for mip settings, compression settings, and srgb settings to give more control` +- Line 169: `if (!bIsBlurRequired && *(PixelPtrToUpdate + 2) > COLOR_TO_BYTE(BlurTriggerThreshold))// TODO: this value needs to either be a parameter or passed in - this is the lower band` +- Line 683: `* TODO: This needs to be fixed in the future, but for now we will use the Mat class. Potential fixes include OpenCV stream handling` +- Line 726: `std::vector points;// TODO: need to test this with a vector of points` +- Line 891: `// TODO: future work may want to add a bool to save texture as grayscale` +- Line 1100: `//TODO: ADD VARIABLES TO STORE ALREADY CALCULATED CVD COLOURS -- MAYBE BUT BLUR Could mess this up` +- Line 1134: `//TODO: ADD VARIABLES TO STORE ALREADY CALCULATED CVD COLOURS -- MAYBE BUT BLUR Could mess this up` +**Visualization/Private/QuadTreeSubsystem.cpp** +- Line 102: `// check tree not null -TODO: Add bool if we using a quad or oct tree(eventually all be oct)` +**Visualization/Private/HeatmapVisualizer.cpp** +- Line 232: `//TODO FIX THIS SIZE ISSUE` +- Line 332: `//TODO: covert to parallel for loop` +**Visualization/Public/QuadTreeSubsystem.h** +- Line 71: `void RemoveEntityFromTree(FVector EntityLocation);//TODO: this needs to be a hash` +- Line 86: `//TODO: work out the columns and rows for the quadtree for spline graph to use` +**Visualization/Public/HeatmapVisualizer.h** +- Line 63: `// TODO: This method is likely going to need to be async so that we can update the render target in real time and not block the main thread` +**Visualization/Public/QuadTreeDataMap.h** +- Line 90: `//TODO: If a hash can be made to work out the tree location this would be a lot faster` +- Line 105: `* TODO: Add ID hashing to remove entities - this way we don't have to recursively search for the entity and can remove it in O(TreeDepth) time` **MobiusWidgets/Private/UI/Components/Scalability/AdjustAvatarModel.cpp** - Line 43: `//TODO: we have method duplicates that we need to rename and call where appropriate` -**MobiusWidgets/Private/UI/Components/BaseLoadingWidget.cpp** -- Line 156: `// TODO: Future will customize this image to do more effects like change colour` -**MobiusWidgets/Private/UI/Components/FlowSectionCounter.cpp** -- Line 63: `// TODO: backgrounds adjust padding/colors here` -- Line 107: `// TODO: determine if center/align inside our root grid cell here if needed` +**MobiusWidgets/Private/UI/Components/FloorStatsWidget.cpp** +- Line 629: `// TODO: currently we have a limitation for updates that are sent to the overlay,` +**MobiusWidgets/Private/UI/Components/PedestrianDataDisplay.cpp** +- Line 142: `// TODO: for now widget field 6 will be collapsed and not used as the gait speed is not yet implemented` +- Line 227: `WidgetHeadGridPanel->SetVisibility(ESlateVisibility::Visible);// should change to visible but self not hit testable -> TODO: update BP logic to handle this` +- Line 358: `// Check if the the required width and height are not the same as the current coefficients -> TODO: add a tolerance check here so we don't resize if the values are very close` **MobiusWidgets/Private/UI/Components/BaseChangePedestrianMaterial.cpp** - Line 133: `// TODO: this check need to be better and handled differently` - Line 270: `// Does the MaterialInst match the starting material of the pedestrian? // TODO` - Line 436: `// TODO: we may want to display a value to a user` - Line 487: `//PropertySliderText->SetText(FText::FromString("Current " + CurrentMaterialProperty + ": " + FString::SanitizeFloat(CurrentVal))); //TODO this needs to be done in slider changed too` - Line 517: `// TODO: until i figure the best way to handle resizing and scaling of the widget, we will hide the slider and text this way the widget will not be resized` -**MobiusWidgets/Private/UI/Components/PedestrianDataDisplay.cpp** -- Line 142: `// TODO: for now widget field 6 will be collapsed and not used as the gait speed is not yet implemented` -- Line 227: `WidgetHeadGridPanel->SetVisibility(ESlateVisibility::Visible);// should change to visible but self not hit testable -> TODO: update BP logic to handle this` -- Line 358: `// Check if the the required width and height are not the same as the current coefficients -> TODO: add a tolerance check here so we don't resize if the values are very close` +**MobiusWidgets/Private/UI/Components/BaseLoadingWidget.cpp** +- Line 156: `// TODO: Future will customize this image to do more effects like change colour` +**MobiusWidgets/Private/UI/Components/FlowSectionCounter.cpp** +- Line 63: `// TODO: backgrounds adjust padding/colors here` +- Line 107: `// TODO: determine if center/align inside our root grid cell here if needed` +**MobiusWidgets/Private/UI/MobiusSettingPanel.cpp** +- Line 40: `// TODO:` **MobiusWidgets/Private/UI/InWorld/FlowCounterWidget.cpp** - Line 154: `// TODO: may need to assess if the ptr array count matches the uniform grid children count` - Line 195: `// TODO: implement scroll logic` +**MobiusWidgets/Private/Slate/Components/SAgentFollowIndicator.cpp** +- Line 68: `//TODO: need to do this once, likely store a variable and check for nullptr` +- Line 138: `// TODO: we can improve this to be the only SMeshWidget, we just need to figure out how to handle the different textures for each instance` +**MobiusWidgets/Private/Slate/Components/SPedestrianAgentHoverMeshWidget.cpp** +- Line 158: `// TODO: we should add small white placeholder text like ---` +**MobiusWidgets/Private/Slate/Components/SFieldAndTitleText.cpp** +- Line 260: `// TODO: add in padding if needed` +**MobiusWidgets/Private/Slate/Components/SWindowTitleBarWidget.cpp** +- Line 123: `// TODO: Investigate further why calling the parent implementation here seems to cause issues.` **MobiusWidgets/Private/Util/WidgetUtilHelpers.cpp** - Line 196: `//TODO: FIX THIS METHOD` - Line 208: `// TODO: this calculation is wrong` @@ -90,217 +112,195 @@ - Line 67: `// TODO: add methods for updating specific section counter values` **MobiusWidgets/Public/UI/InWorld/AgentInfoDisplay.h** - Line 52: `// TODO: should remove storing data from the widget and instead use a subsystem to manage this data` -**Visualization/Private/HeatmapVisualizer.cpp** -- Line 232: `//TODO FIX THIS SIZE ISSUE` -- Line 332: `//TODO: covert to parallel for loop` -**Visualization/Private/DynamicPixelRenderingTexture.cpp** -- Line 72: `// Level of Service Colors for each band - in linear color format TODO: this needs to be a parameter` -- Line 106: `//TODO: add extra parameters for mip settings, compression settings, and srgb settings to give more control` -- Line 169: `if (!bIsBlurRequired && *(PixelPtrToUpdate + 2) > COLOR_TO_BYTE(BlurTriggerThreshold))// TODO: this value needs to either be a parameter or passed in - this is the lower band` -- Line 683: `* TODO: This needs to be fixed in the future, but for now we will use the Mat class. Potential fixes include OpenCV stream handling` -- Line 726: `std::vector points;// TODO: need to test this with a vector of points` -- Line 891: `// TODO: future work may want to add a bool to save texture as grayscale` -- Line 1100: `//TODO: ADD VARIABLES TO STORE ALREADY CALCULATED CVD COLOURS -- MAYBE BUT BLUR Could mess this up` -- Line 1134: `//TODO: ADD VARIABLES TO STORE ALREADY CALCULATED CVD COLOURS -- MAYBE BUT BLUR Could mess this up` -**Visualization/Private/QuadTreeSubsystem.cpp** -- Line 102: `// check tree not null -TODO: Add bool if we using a quad or oct tree(eventually all be oct)` -**Visualization/Public/QuadTreeDataMap.h** -- Line 90: `//TODO: If a hash can be made to work out the tree location this would be a lot faster` -- Line 105: `* TODO: Add ID hashing to remove entities - this way we don't have to recursively search for the entity and can remove it in O(TreeDepth) time` -**Visualization/Public/QuadTreeSubsystem.h** -- Line 71: `void RemoveEntityFromTree(FVector EntityLocation);//TODO: this needs to be a hash` -- Line 86: `//TODO: work out the columns and rows for the quadtree for spline graph to use` -**Visualization/Public/HeatmapVisualizer.h** -- Line 63: `// TODO: This method is likely going to need to be async so that we can update the render target in real time and not block the main thread` -**ProjectMobius/Private/BRisk/BRiskDataSubsystem.cpp** -- Line 596: `// TODO(b-risk geometry toggle / mobius builder): the OFF path below reloads the imported building` -**ProjectMobius/Private/Widgets/Simulation/TimeDilationWidget.cpp** -- Line 59: `//TODO: change to FTEXT so we can format the text better and have it localized` -**ProjectMobius/Private/Widgets/Simulation/SimulationPlayBar.cpp** -- Line 352: `//TODO: THIS NEEDS TO BE FIXED - currently only works when sim is paused first then dragged and unpaused not live adjust(somewhere is updating to previous value after new value)` -- Line 396: `// Round current step to the nearest step size - TODO: this ` -- Line 519: `// TODO: look into UWidgetUtilHelpers for this functionality and see if its better or useable` -**ProjectMobius/Private/Controller/MobiusController.cpp** -- Line 515: `// TODO: Current implementation is a placeholder and will load the file each time and then pick a random transform` -**ProjectMobius/Private/MassAI/MassProcessor/Collisions/PedestrianCollisionProcessor.cpp** -- Line 47: `//TODO: add tag for when we do toggle logic if we want to toggle the collision processor on and off` -- Line 74: `//TODO: We have two methods that rely on the agent subsystem we should assign it to a variable and use it` -- Line 101: `//TODO: below the query needs to be optimized so its scalable - current implementation is not scalable and is a hack together prototype` -- Line 120: `//TODO: We have two methods that rely on the agent subsystem we should assign it to a variable and use it` -- Line 252: `if (EntityCollision.Capsule.Get() == HoveredCapsuleComponent)//TODO: DOUBLE CLICK ` -**ProjectMobius/Private/MassAI/MassProcessor/PedestrianMovementProcessor.cpp** -- Line 171: `// TODO: This processor needs breaking up into smaller processors as it is doing too much at once` -- Line 196: `//TODO: Move data to subsystem and get it from there so not constantly getting large data sets` -- Line 413: `//TODO: ****** when destroying respawning back this should only be called when needed not every execute ******` -- Line 494: `// TODO: This one should be at the start to only check once per call not per loop iteration per call` -**ProjectMobius/Private/MassAI/MassProcessor/Representation/AgentHeatmapProcessor.cpp** -- Line 151: `// TODO: Getting mallocs and realloc collisions with parallel -> maybe need to look at null check or something` -- Line 448: `// TODO: this loop is not parallelized, implement ParallelFor for performance and a threadsafe container for HeatmapLocations for simplicity` -**ProjectMobius/Private/MassAI/MassProcessor/Representation/NiagaraAgentRepProcessor.cpp** -- Line 122: `//TODO: Make flag for this so no constant gets etc` -- Line 127: `// Get the agent representation actor //TODO: this works but it could be better` -- Line 150: `//TODO: need to look at mass ai signals and how to use them -> this should be the equivalent to delegates and events -> and the reloading the shared fragments should only occur then` -- Line 158: `//TODO: this check does not work at all, it never returns true despite data changes!!` -- Line 347: `// Half of the former TODO here is now done: a failed agent's mesh is hidden (bHiddenByTenabilityFailure` -- Line 548: `//TODO: FIX THIS - when going low spec to high the animations remain paused and only resume when we pause and unpause` -**ProjectMobius/Private/MassAI/MassProcessor/Representation/DisplayAgentUIStatsProcessor.cpp** -- Line 207: `//TODO: Moving away from the agent mesh viewer, we will need to update this to use the new system ->once we have collisions` -**ProjectMobius/Private/MassAI/MassProcessor/Analytics/FlowCounterProcessor.cpp** -- Line 63: `//TODO: check if paused -> don't want to keep executing if not needed` -**ProjectMobius/Private/MassAI/SubSystems/MassEntitySpawnSubsystem.cpp** -- Line 120: `//TODO: add a bool to check if the archetype has been created and if so, don't create it again` -- Line 179: `//TODO: We dont want to simulate time till this is done, also we need a better way to build shared fragment and update the archetype on data changes` -**ProjectMobius/Private/MassAI/SubSystems/MassRepresentation/MRS_RepresentationSubsystem.cpp** -- Line 260: `// TODO: no separate gender logic yet` -- Line 578: `// TODO: refactor this method` -- Line 599: `//TODO: at the moment this method will be fine` -**ProjectMobius/Private/MassAI/SubSystems/AgentDataSubsystem.cpp** -- Line 115: `//TODO: optimize this so that the file path is not hardcoded and we only perform this operation once` -- Line 173: `//TODO: this is a temp fix but we need to find a better way to update loading text from this subsystems` -- Line 296: `else // no valid age demographic found -> TODO: for now just set it to adult but need to think on how we want to handle this` -- Line 900: `* @note TODO: Some agents appear to be moving but have 0 speed calculated. Investigate where` -- Line 957: `Subsys->ProgressQueue.Enqueue(0.0f);// TODO: NEED to broadcast new load text here` -- Line 1149: `// TODO: this has no way to know progress of loading file at the moment so we need to think on how to do this better` -**ProjectMobius/Private/MassAI/MassObserverProcessor/PedestrianInitializeMOP.cpp** -- Line 202: `//TODO: This is a poor assumption and should really be searching and checking` -- Line 347: `//TODO: MOVE INTO OWN OBSERVOR` -**ProjectMobius/Private/MassAI/MassObserverProcessor/Representation/AgentRepresentation_MOP.cpp** -- Line 155: `//TODO: need to do index size and offset check here` -- Line 168: `// TODO: this check will always fail on data swap as the frags are reset so sizes will be 0 like the offset` -- Line 252: `// TODO(§4): confirm this handle name once the chair emitter is actually added to both Niagara` -**ProjectMobius/Private/MassAI/SignalProcessors/EnableCollisionSignalProcessor.cpp** -- Line 34: `//TODO: will want to break this into two different signal processors, one for enabling collisions and one for disabling collisions -> this way the disable logic can be more complex and handle the disa` -**ProjectMobius/Public/Widgets/Simulation/SimulationPlayBar.h** -- Line 108: `* Decrement the current playback by 0.1 seconds - TODO: see whether its better to do by a timestep or by a fixed value` -**ProjectMobius/Public/Widgets/Simulation/TimeDilationWidget.h** -- Line 76: `//TODO: Change UTextblocks to RichTextBlocks for better formatting and styling` -**ProjectMobius/Public/MassAI/MassProcessor/PedestrianMovementProcessor.h** -- Line 109: `* TODO: This will be eventually replaced to be a lookup method but for now simple check` -**ProjectMobius/Public/MassAI/MassProcessor/Representation/AgentHeatmapProcessor.h** -- Line 118: `/** Subsystem for heatmaps -- TODO: move this to its own processor */` -- Line 215: `UE::TConsumeAllMpmcQueue LocationQueue; //TODO: Need to handle garbage collection of this queue` -**ProjectMobius/Public/MassAI/Fragments/SharedFragments/SimulationFragment.h** -- Line 121: `// TODO: Add buffer method and not store all data in this struct` -- Line 122: `// TODO: This Map logic needs improving as it is not efficient with large data sets and looping over all data is poor` -**ProjectMobius/Public/MassAI/Fragments/SharedFragments/RepresentationFragments/AgentRepresentationFragment.h** -- Line 90: `int32 NumberOfChildren = 0;// TODO: Maybe do different genders` -- Line 99: `//TODO: currently use bool to switch between low spec static effect and med VAT effect -> when we use enum we will use it here too` -- Line 142: `int32 NumberOfChildren = 0;// TODO: Maybe do different genders` -- Line 154: `//TODO: currently use bool to switch between low spec static effect and med VAT effect -> when we use enum we will use it here too` -**ProjectMobius/Public/MassAI/Fragments/SharedFragments/RepresentationFragments/AgentNiagaraDataFrag.h** -- Line 53: `TArray MaleAdultAnimationStates; // TODO: likely when we bring dif age brackets we want all of them to be in one array` -- Line 77: `TArray FemaleAdultAnimationStates; // TODO: likely when we bring dif age brackets we want all of them to be in one array` -**ProjectMobius/Public/MassAI/Fragments/EntityInfoFragment.h** -- Line 218: `uint8 showPedestrianStats = 0;// 0 = don't show, 1 = show, TODO: 2 = show and highlight` -- Line 288: `struct PROJECTMOBIUS_API FEntityCollisionFragment: public FMassFragment //TODO: this may want to be a FObjectWrapperFragment ?? TBD` -**ProjectMobius/Public/MassAI/SubSystems/MassRepresentation/MRS_RepresentationSubsystem.h** -- Line 63: `static const FVatMovementFrames AvatarGaitSpeedBands[] = { // TODO: need more, narrower bands: fastShuffle, VerySlowWalk etc.` -- Line 169: `* @param[float] AgentMaxSpeed The agents max speed TODO: this is a quick fix to create variations in agent movement speeds` -- Line 213: `//TODO: while still using bool on avatar choice in frag use this method to convert current setting to a bool` -**ProjectMobius/Public/MassAI/SubSystems/MassEntitySpawnSubsystem.h** -- Line 134: `void BuildPedestrianRepresentationFragmentData(); // TODO: add inputs to allow for customisation of the pedestrian representation currently hardcoded values` -**ProjectMobius/Public/MassAI/SubSystems/AgentDataSubsystem.h** -- Line 349: `* @warning TODO: Some agents appear to be moving but have 0 speed calculated.` -**HIT_ThesisWork/Private/ExperimentScorer.cpp** -- Line 209: `Result = FFileHelper::SaveStringToFile(FString("Test Data"), *CSVFilePath);//TODO: Replace "Test Data" with the actual data and look at my other code for how to format the data and add more complexity` -- Line 345: `bColourDeficiencyOverrided = false; // TODO: change to true once images for thesis done` -**HIT_ThesisWork/Public/ExperimentScorer.h** -- Line 285: `const int32 SimulationLimit = 5;// TODO: change this if recruitment increases` **MobiusCore/Private/GameInstances/ProjectMobiusGameInstance.cpp** - Line 38: `// TODO: Set default values for these variables -- talk to peter if particular values are needed that` -**MobiusCore/Private/Actors/FlowCounter.cpp** -- Line 50: `// TODO: Move these helpers to a utility class - likely will be useful elsewhere` -- Line 277: `// TODO: Need to clean up the line offset so we are consistent about ground vs line height as this is confusing` -- Line 357: `// TODO: setup alternative for VR` -- Line 533: `//TODO: likely need to communicate pillars location changing wait for changes to mass ai so we don't get data corruption/mismatches` -- Line 583: `// TODO: depending on mass ai logic we may want to reset the agents passed through counter as well` -- Line 680: `//TODO: Our z limits shouldn't be based on the trigger box extents as if the pillars are at different z locations, the trigger box will be rotated` -- Line 785: `// TODO: this is a temporary fix to account for the Z search limits being in world space and the line intersection check being in local space` -- Line 851: `else if (FlowCounter->PreviousTrackedAgentLocations.Contains(Data.AgentID)) // TODO: check if we actually want to check if intersected or disregard ` -- Line 870: `// TODO: this is a temporary fix to account for the Z search limits being in world space and the line intersection check being in local space -> also minz may not be correctly set` -- Line 1029: `// TODO: until we handle new sim time for large amounts of actors then we should only ` -- Line 1154: `// TODO: Review this logic with Pete to ensure this is how we should be checking` -- Line 1221: `//TODO: If we store in multiple buckets in the case when start and end locations are the same we may want to remove from all buckets` -**MobiusCore/Private/Actors/HeatmapPixelTextureVisualizer.cpp** -- Line 262: `GenerateMeshVerticesUVsAndTriangles(MeshSize, FIntPoint(TextureWidth, TextureHeight), bIs3DHeatmap); // TODO work out a resolution for the mesh to be generated` -- Line 1035: `//TODO: for now hardcode the radius as 11 - this is to be changed to a variable and be a float over integer for more precise locations` -- Line 1080: `//TODO:OPTIMIZE` -- Line 1105: `DynamicTexture->ClearTexture(); // TODO: create a buffer that represents clear so no need to keep doing loops` -- Line 1135: `// TODO: this convert not needed as was part of user study test -> it should be converted into a material logic not cpu logic` -- Line 1262: `//TODO:OPTIMIZE` -- Line 1281: `DynamicTexture->ClearTexture(); // TODO: create a buffer that represents clear so no need to keep doing loops` -- Line 1308: `// TODO: this convert not needed as was part of user study test -> it should be converted into a material logic not cpu logic` -- Line 1894: `NumTriangles.X = FMath::CeilToInt32(MeshSize.X / 25); // TODO: working in meters so 100 is 1 meter so divide by 25 to get 4 triangles per meter` -- Line 1896: `//TODO: this is a fix triangle size based on being to a 10 tenth of the mesh size - this is as resolution goes up so does the number of triangles required` -- Line 2502: `float StepSize = 650.0f; // TODO: This is a hardcoded value for now for demo 500 ensures the building is covered - its too large for the mesh and has overflow around the edges ` **MobiusCore/Private/BuildingGenerator/RuntimeMeshBuilder.cpp** - Line 784: `FDatasmithRuntimeImportOptions ImportOptions;// TODO: set the import options` - Line 935: `// TODO:check valid data` - Line 940: `/** TODO: if we get here and the runnable is not valid or the async loader is not valid we need to handle this` -**MobiusCore/Private/Subsystems/StatisticSubsystem.cpp** -- Line 128: `// TODO: switch to delta add/remove instead of full-array rebroadcast.` -- Line 133: `//TODO: we are going to need to expand this functionality when we increase the number of flow counters and their Z bounds` -- Line 185: `//TODO: this should be private method that we call after filtered in to correspond flowcounter groups - but prototype only using one so direct call to this is fine` -- Line 276: `// TODO: Instantaneous flow rate is the important one need to add` +**MobiusCore/Private/Interfaces/AssimpInterface.cpp** +- Line 37: `// May need to use rotate instead of unrotate -- TODO: See the difference between the two` **MobiusCore/Private/Subsystems/PerformanceUtilSubsystem.cpp** -- Line 149: `//TODO: investigate the best way to clear the delegate` -- Line 223: `//TODO: This method is simplistic and only calculates FPS based on DeltaTime.` -- Line 296: `// TODO: Extract private update method so we can update settings automatically or by users` -- Line 322: `// TODO: check if we can optimize this and reduce` -- Line 339: `// TODO: Extract private update method so we can update settings automatically or by users` -- Line 423: `// Using RHI we can get the available resolutions - TODO: we may want to look at refresh rate as well` -- Line 454: `// TODO: Extract private update method so we can update settings automatically or by users` -- Line 505: `// TODO: Extract private update method so we can update settings automatically or by users` -- Line 526: `//TODO: Below can be optimized with a lambda` -- Line 609: `CheckHardwareUsageAndApplyOptimizations();// TODO: current method is a stub, we need to implement it` -- Line 628: `//TODO: Our check for FPS is simplistic and only checks if the FPS is below a threshold. - we may want a range tolerance as well` +- Line 181: `//TODO: investigate the best way to clear the delegate` +- Line 292: `//TODO: This method is simplistic and only calculates FPS based on DeltaTime.` +- Line 371: `// TODO: Extract private update method so we can update settings automatically or by users` +- Line 397: `// TODO: check if we can optimize this and reduce` +- Line 414: `// TODO: Extract private update method so we can update settings automatically or by users` +- Line 498: `// Using RHI we can get the available resolutions - TODO: we may want to look at refresh rate as well` +- Line 529: `// TODO: Extract private update method so we can update settings automatically or by users` +- Line 580: `// TODO: Extract private update method so we can update settings automatically or by users` +- Line 601: `//TODO: Below can be optimized with a lambda` +- Line 684: `CheckHardwareUsageAndApplyOptimizations();// TODO: current method is a stub, we need to implement it` +- Line 707: `//TODO: Our check for FPS is simplistic and only checks if the FPS is below a threshold. - we may want a range tolerance as well` **MobiusCore/Private/Subsystems/TimeDilationSubSystem.cpp** - Line 53: `UpdateMaxTimeSteps(FMath::CeilToInt(TotalTime / TimeBetweenSteps)); //TODO: TimeBetweenSteps should be read from file or a setting for the user` - Line 203: `UpdateMaxTimeSteps(FMath::CeilToInt32(TotalTime / TimeBetweenSteps)); //TODO: TimeBetweenSteps should be read from file or a setting for the user` - Line 318: `// TODO make this better` +**MobiusCore/Private/Subsystems/StatisticSubsystem.cpp** +- Line 128: `// TODO: switch to delta add/remove instead of full-array rebroadcast.` +- Line 133: `//TODO: we are going to need to expand this functionality when we increase the number of flow counters and their Z bounds` +- Line 185: `//TODO: this should be private method that we call after filtered in to correspond flowcounter groups - but prototype only using one so direct call to this is fine` +- Line 276: `// TODO: Instantaneous flow rate is the important one need to add` **MobiusCore/Private/Subsystems/HeatmapSubsystem.cpp** - Line 125: `//TODO: we just want to update the heatmap if the location is the same and values are different` - Line 140: `FString HeatmapName = FString::Printf(TEXT("Heatmap_%i"), HeatmapIndex);// TODO: create a floor classification method based on array size` - Line 510: `// TODO: this sort of works for now but likely will cause problems later on` - Line 779: `// TODO: THis method causing a small performance hit, need to investigate, likely due to the way task is executed and requiring game thread for some operations` -**MobiusCore/Private/Components/FlowCounterSpawnerComponent.cpp** -- Line 261: `// TODO: Manipulate the rotation, size etc to fit door` -**MobiusCore/Private/Interfaces/AssimpInterface.cpp** -- Line 37: `// May need to use rotate instead of unrotate -- TODO: See the difference between the two` +**MobiusCore/Private/Actors/HeatmapPixelTextureVisualizer.cpp** +- Line 262: `GenerateMeshVerticesUVsAndTriangles(MeshSize, FIntPoint(TextureWidth, TextureHeight), bIs3DHeatmap); // TODO work out a resolution for the mesh to be generated` +- Line 1035: `//TODO: for now hardcode the radius as 11 - this is to be changed to a variable and be a float over integer for more precise locations` +- Line 1080: `//TODO:OPTIMIZE` +- Line 1105: `DynamicTexture->ClearTexture(); // TODO: create a buffer that represents clear so no need to keep doing loops` +- Line 1135: `// TODO: this convert not needed as was part of user study test -> it should be converted into a material logic not cpu logic` +- Line 1262: `//TODO:OPTIMIZE` +- Line 1281: `DynamicTexture->ClearTexture(); // TODO: create a buffer that represents clear so no need to keep doing loops` +- Line 1308: `// TODO: this convert not needed as was part of user study test -> it should be converted into a material logic not cpu logic` +- Line 1894: `NumTriangles.X = FMath::CeilToInt32(MeshSize.X / 25); // TODO: working in meters so 100 is 1 meter so divide by 25 to get 4 triangles per meter` +- Line 1896: `//TODO: this is a fix triangle size based on being to a 10 tenth of the mesh size - this is as resolution goes up so does the number of triangles required` +- Line 2502: `float StepSize = 650.0f; // TODO: This is a hardcoded value for now for demo 500 ensures the building is covered - its too large for the mesh and has overflow around the edges ` +**MobiusCore/Private/Actors/FlowCounter.cpp** +- Line 50: `// TODO: Move these helpers to a utility class - likely will be useful elsewhere` +- Line 277: `// TODO: Need to clean up the line offset so we are consistent about ground vs line height as this is confusing` +- Line 357: `// TODO: setup alternative for VR` +- Line 533: `//TODO: likely need to communicate pillars location changing wait for changes to mass ai so we don't get data corruption/mismatches` +- Line 583: `// TODO: depending on mass ai logic we may want to reset the agents passed through counter as well` +- Line 680: `//TODO: Our z limits shouldn't be based on the trigger box extents as if the pillars are at different z locations, the trigger box will be rotated` +- Line 785: `// TODO: this is a temporary fix to account for the Z search limits being in world space and the line intersection check being in local space` +- Line 851: `else if (FlowCounter->PreviousTrackedAgentLocations.Contains(Data.AgentID)) // TODO: check if we actually want to check if intersected or disregard ` +- Line 870: `// TODO: this is a temporary fix to account for the Z search limits being in world space and the line intersection check being in local space -> also minz may not be correctly set` +- Line 1029: `// TODO: until we handle new sim time for large amounts of actors then we should only ` +- Line 1154: `// TODO: Review this logic with Pete to ensure this is how we should be checking` +- Line 1221: `//TODO: If we store in multiple buckets in the case when start and end locations are the same we may want to remove from all buckets` **MobiusCore/Private/AsyncAssimpMeshLoader.cpp** - Line 334: `//TODO: Need to workout a way to handle normals for WKT data -> filters just don't work for this` - Line 905: `//TODO: this method needs to be refactored to use matrix transformations as it doesn't work when it comes to normals and this is where the issue is for translucent materials` +**MobiusCore/Private/Components/FlowCounterSpawnerComponent.cpp** +- Line 261: `// TODO: Manipulate the rotation, size etc to fit door` **MobiusCore/Public/GameInstances/ProjectMobiusGameInstance.h** - Line 113: `//TODO: convert methods below so we can broadcast events when the data is changed` - Line 288: `//TODO: we will bring datatables back as it makes it to manage and requires less memory allocation` - Line 371: `//TODO: we will bring datatables back as it makes it to manage and requires less memory allocation` -**MobiusCore/Public/Actors/FlowCounter.h** -- Line 19: `// Structs used internally for bucketing agents -> TODO: Move it to the FlowCounterStructs.h file as we may want to use it elsewhere` -- Line 255: `// TODO: we will need to also bucket this off as a per segment rolling average as we want that data` -- Line 307: `/* TODO: this property is redundant, we should just update methods to use the line that would be at the base of the pillars` -- Line 314: `/* TODO: we will want a reference to a user widget this way we can create a cpp version in the widget module and` -**MobiusCore/Public/Actors/HeatmapPixelTextureVisualizer.h** -- Line 214: `// TODO: This method is likely going to need to be async so that we can update the render target in real time and not block the main thread` -- Line 305: `/**TODO: look over this as it is late when you wrote it` -- Line 569: `* TODO: Currently using integer values, this should be changed to a float value for more precise locations and scale to texture and mesh size` -- Line 572: `int32 CircleRadius = 110; // 110 = 1.1m for our scaled data - TODO: SORT THIS OUT FOR BETTER SCALING` -- Line 698: `// TODO(perf, owner-flagged 2026-08-10): reduce the trajectory field's memory footprint by condensing` -- Line 1032: `int32 ScaledCircleSize; // TODO: This should be a float value for more precise locations and scale to texture and mesh size` -**MobiusCore/Public/EnumsAndStructs/AgentMeshViewer.h** -- Line 28: `//TODO: // Add more properties as needed, such as direction, health, etc.` **MobiusCore/Public/BuildingGenerator/RuntimeMeshBuilder.h** - Line 308: `/** Internal method to set the material on the mesh - TODO: this will need to be converted to be called via a delegate */` - Line 486: `/** TODO: We eventually want to get the mesh material and apply our materials to it as a mask or material function to it` **MobiusCore/Public/Subsystems/PerformanceUtilSubsystem.h** - Line 21: `DECLARE_MULTICAST_DELEGATE(FOnManualScalabilityChanged);//TODO: investigate whether separate param delegates will be better for performance or not` +**MobiusCore/Public/Subsystems/StatisticSubsystem.h** +- Line 57: `/** TODO: this will be used to pull logic from the heatmap subsystem and the floor stats widget so only one subsystem is used` **MobiusCore/Public/Subsystems/HeatmapSubsystem.h** - Line 118: `* TODO: we will in future want to pass more parameters to this function like type of heatmap, size, etc` - Line 249: `//TODO: this method needs to be placed in a more appropriate place as it is not really a heatmap method but we have bound the visualiser chart logic to this system` -**MobiusCore/Public/Subsystems/StatisticSubsystem.h** -- Line 57: `/** TODO: this will be used to pull logic from the heatmap subsystem and the floor stats widget so only one subsystem is used` **MobiusCore/Public/Subsystems/TimeDilationSubSystem.h** - Line 44: `/** Delegate to broadcast the new simulation time when it changes */ //TODO: do we need this delegate? left comment for now` - Line 190: `//TODO: @Peter -- This an assumption to be clarified but I am assuming all timesteps are calculated` **MobiusCore/Public/Subsystems/MobiusControllerSubsystem.h** - Line 87: `/**TODO: TBD if we can or want to use interfaces with mass ai entities, if so then we can use this method to perform a line trace` +**MobiusCore/Public/Actors/HeatmapPixelTextureVisualizer.h** +- Line 214: `// TODO: This method is likely going to need to be async so that we can update the render target in real time and not block the main thread` +- Line 305: `/**TODO: look over this as it is late when you wrote it` +- Line 569: `* TODO: Currently using integer values, this should be changed to a float value for more precise locations and scale to texture and mesh size` +- Line 572: `int32 CircleRadius = 110; // 110 = 1.1m for our scaled data - TODO: SORT THIS OUT FOR BETTER SCALING` +- Line 698: `// TODO(perf, owner-flagged 2026-08-10): reduce the trajectory field's memory footprint by condensing` +- Line 1032: `int32 ScaledCircleSize; // TODO: This should be a float value for more precise locations and scale to texture and mesh size` +**MobiusCore/Public/Actors/FlowCounter.h** +- Line 19: `// Structs used internally for bucketing agents -> TODO: Move it to the FlowCounterStructs.h file as we may want to use it elsewhere` +- Line 255: `// TODO: we will need to also bucket this off as a per segment rolling average as we want that data` +- Line 307: `/* TODO: this property is redundant, we should just update methods to use the line that would be at the base of the pillars` +- Line 314: `/* TODO: we will want a reference to a user widget this way we can create a cpp version in the widget module and` +**MobiusCore/Public/EnumsAndStructs/AgentMeshViewer.h** +- Line 28: `//TODO: // Add more properties as needed, such as direction, health, etc.` +**HIT_ThesisWork/Private/ExperimentScorer.cpp** +- Line 209: `Result = FFileHelper::SaveStringToFile(FString("Test Data"), *CSVFilePath);//TODO: Replace "Test Data" with the actual data and look at my other code for how to format the data and add more complexity` +- Line 345: `bColourDeficiencyOverrided = false; // TODO: change to true once images for thesis done` +**HIT_ThesisWork/Public/ExperimentScorer.h** +- Line 285: `const int32 SimulationLimit = 5;// TODO: change this if recruitment increases` +**ProjectMobius/Private/MassAI/MassObserverProcessor/Representation/AgentRepresentation_MOP.cpp** +- Line 155: `//TODO: need to do index size and offset check here` +- Line 168: `// TODO: this check will always fail on data swap as the frags are reset so sizes will be 0 like the offset` +- Line 252: `// TODO(§4): confirm this handle name once the chair emitter is actually added to both Niagara` +**ProjectMobius/Private/MassAI/MassObserverProcessor/PedestrianInitializeMOP.cpp** +- Line 202: `//TODO: This is a poor assumption and should really be searching and checking` +- Line 347: `//TODO: MOVE INTO OWN OBSERVOR` +**ProjectMobius/Private/MassAI/SignalProcessors/EnableCollisionSignalProcessor.cpp** +- Line 34: `//TODO: will want to break this into two different signal processors, one for enabling collisions and one for disabling collisions -> this way the disable logic can be more complex and handle the disa` +**ProjectMobius/Private/MassAI/SubSystems/AgentDataSubsystem.cpp** +- Line 115: `//TODO: optimize this so that the file path is not hardcoded and we only perform this operation once` +- Line 173: `//TODO: this is a temp fix but we need to find a better way to update loading text from this subsystems` +- Line 296: `else // no valid age demographic found -> TODO: for now just set it to adult but need to think on how we want to handle this` +- Line 900: `* @note TODO: Some agents appear to be moving but have 0 speed calculated. Investigate where` +- Line 957: `Subsys->ProgressQueue.Enqueue(0.0f);// TODO: NEED to broadcast new load text here` +- Line 1149: `// TODO: this has no way to know progress of loading file at the moment so we need to think on how to do this better` +**ProjectMobius/Private/MassAI/SubSystems/MassEntitySpawnSubsystem.cpp** +- Line 120: `//TODO: add a bool to check if the archetype has been created and if so, don't create it again` +- Line 179: `//TODO: We dont want to simulate time till this is done, also we need a better way to build shared fragment and update the archetype on data changes` +**ProjectMobius/Private/MassAI/SubSystems/MassRepresentation/MRS_RepresentationSubsystem.cpp** +- Line 260: `// TODO: no separate gender logic yet` +- Line 578: `// TODO: refactor this method` +- Line 599: `//TODO: at the moment this method will be fine` +**ProjectMobius/Private/MassAI/MassProcessor/PedestrianMovementProcessor.cpp** +- Line 171: `// TODO: This processor needs breaking up into smaller processors as it is doing too much at once` +- Line 196: `//TODO: Move data to subsystem and get it from there so not constantly getting large data sets` +- Line 413: `//TODO: ****** when destroying respawning back this should only be called when needed not every execute ******` +- Line 494: `// TODO: This one should be at the start to only check once per call not per loop iteration per call` +**ProjectMobius/Private/MassAI/MassProcessor/Representation/NiagaraAgentRepProcessor.cpp** +- Line 122: `//TODO: Make flag for this so no constant gets etc` +- Line 127: `// Get the agent representation actor //TODO: this works but it could be better` +- Line 150: `//TODO: need to look at mass ai signals and how to use them -> this should be the equivalent to delegates and events -> and the reloading the shared fragments should only occur then` +- Line 158: `//TODO: this check does not work at all, it never returns true despite data changes!!` +- Line 347: `// Half of the former TODO here is now done: a failed agent's mesh is hidden (bHiddenByTenabilityFailure` +- Line 548: `//TODO: FIX THIS - when going low spec to high the animations remain paused and only resume when we pause and unpause` +**ProjectMobius/Private/MassAI/MassProcessor/Representation/DisplayAgentUIStatsProcessor.cpp** +- Line 207: `//TODO: Moving away from the agent mesh viewer, we will need to update this to use the new system ->once we have collisions` +**ProjectMobius/Private/MassAI/MassProcessor/Representation/AgentHeatmapProcessor.cpp** +- Line 151: `// TODO: Getting mallocs and realloc collisions with parallel -> maybe need to look at null check or something` +- Line 448: `// TODO: this loop is not parallelized, implement ParallelFor for performance and a threadsafe container for HeatmapLocations for simplicity` +**ProjectMobius/Private/MassAI/MassProcessor/Analytics/FlowCounterProcessor.cpp** +- Line 63: `//TODO: check if paused -> don't want to keep executing if not needed` +**ProjectMobius/Private/MassAI/MassProcessor/Collisions/PedestrianCollisionProcessor.cpp** +- Line 47: `//TODO: add tag for when we do toggle logic if we want to toggle the collision processor on and off` +- Line 74: `//TODO: We have two methods that rely on the agent subsystem we should assign it to a variable and use it` +- Line 101: `//TODO: below the query needs to be optimized so its scalable - current implementation is not scalable and is a hack together prototype` +- Line 120: `//TODO: We have two methods that rely on the agent subsystem we should assign it to a variable and use it` +- Line 252: `if (EntityCollision.Capsule.Get() == HoveredCapsuleComponent)//TODO: DOUBLE CLICK ` +**ProjectMobius/Private/Controller/MobiusController.cpp** +- Line 515: `// TODO: Current implementation is a placeholder and will load the file each time and then pick a random transform` +**ProjectMobius/Private/Widgets/Simulation/SimulationPlayBar.cpp** +- Line 352: `//TODO: THIS NEEDS TO BE FIXED - currently only works when sim is paused first then dragged and unpaused not live adjust(somewhere is updating to previous value after new value)` +- Line 396: `// Round current step to the nearest step size - TODO: this ` +- Line 519: `// TODO: look into UWidgetUtilHelpers for this functionality and see if its better or useable` +**ProjectMobius/Private/Widgets/Simulation/TimeDilationWidget.cpp** +- Line 59: `//TODO: change to FTEXT so we can format the text better and have it localized` +**ProjectMobius/Private/BRisk/BRiskDataSubsystem.cpp** +- Line 596: `// TODO(b-risk geometry toggle / mobius builder): the OFF path below reloads the imported building` +**ProjectMobius/Public/MassAI/SubSystems/AgentDataSubsystem.h** +- Line 349: `* @warning TODO: Some agents appear to be moving but have 0 speed calculated.` +**ProjectMobius/Public/MassAI/SubSystems/MassRepresentation/MRS_RepresentationSubsystem.h** +- Line 63: `static const FVatMovementFrames AvatarGaitSpeedBands[] = { // TODO: need more, narrower bands: fastShuffle, VerySlowWalk etc.` +- Line 169: `* @param[float] AgentMaxSpeed The agents max speed TODO: this is a quick fix to create variations in agent movement speeds` +- Line 213: `//TODO: while still using bool on avatar choice in frag use this method to convert current setting to a bool` +**ProjectMobius/Public/MassAI/SubSystems/MassEntitySpawnSubsystem.h** +- Line 134: `void BuildPedestrianRepresentationFragmentData(); // TODO: add inputs to allow for customisation of the pedestrian representation currently hardcoded values` +**ProjectMobius/Public/MassAI/MassProcessor/Representation/AgentHeatmapProcessor.h** +- Line 118: `/** Subsystem for heatmaps -- TODO: move this to its own processor */` +- Line 215: `UE::TConsumeAllMpmcQueue LocationQueue; //TODO: Need to handle garbage collection of this queue` +**ProjectMobius/Public/MassAI/MassProcessor/PedestrianMovementProcessor.h** +- Line 109: `* TODO: This will be eventually replaced to be a lookup method but for now simple check` +**ProjectMobius/Public/MassAI/Fragments/EntityInfoFragment.h** +- Line 218: `uint8 showPedestrianStats = 0;// 0 = don't show, 1 = show, TODO: 2 = show and highlight` +- Line 288: `struct PROJECTMOBIUS_API FEntityCollisionFragment: public FMassFragment //TODO: this may want to be a FObjectWrapperFragment ?? TBD` +**ProjectMobius/Public/MassAI/Fragments/SharedFragments/SimulationFragment.h** +- Line 121: `// TODO: Add buffer method and not store all data in this struct` +- Line 122: `// TODO: This Map logic needs improving as it is not efficient with large data sets and looping over all data is poor` +**ProjectMobius/Public/MassAI/Fragments/SharedFragments/RepresentationFragments/AgentRepresentationFragment.h** +- Line 90: `int32 NumberOfChildren = 0;// TODO: Maybe do different genders` +- Line 99: `//TODO: currently use bool to switch between low spec static effect and med VAT effect -> when we use enum we will use it here too` +- Line 142: `int32 NumberOfChildren = 0;// TODO: Maybe do different genders` +- Line 154: `//TODO: currently use bool to switch between low spec static effect and med VAT effect -> when we use enum we will use it here too` +**ProjectMobius/Public/MassAI/Fragments/SharedFragments/RepresentationFragments/AgentNiagaraDataFrag.h** +- Line 53: `TArray MaleAdultAnimationStates; // TODO: likely when we bring dif age brackets we want all of them to be in one array` +- Line 77: `TArray FemaleAdultAnimationStates; // TODO: likely when we bring dif age brackets we want all of them to be in one array` +**ProjectMobius/Public/Widgets/Simulation/SimulationPlayBar.h** +- Line 108: `* Decrement the current playback by 0.1 seconds - TODO: see whether its better to do by a timestep or by a fixed value` +**ProjectMobius/Public/Widgets/Simulation/TimeDilationWidget.h** +- Line 76: `//TODO: Change UTextblocks to RichTextBlocks for better formatting and styling`