Liftr Commvault PowerShell cmdlets for stable version 2026-09-30

src/Commvault/Commvault.Autorest/.gitattributes

@@ -0,0 +1 @@
+* text=auto

src/Commvault/Commvault.Autorest/.gitignore

@@ -0,0 +1,16 @@
+bin
+obj
+.vs
+generated
+internal
+exports
+tools
+test/*-TestResults.xml
+license.txt
+/*.ps1
+/*.psd1
+/*.ps1xml
+/*.psm1
+/*.snk
+/*.csproj
+/*.nuspec

src/Commvault/Commvault.Autorest/Properties/AssemblyInfo.cs

@@ -0,0 +1,28 @@
+// Copyright (c) Microsoft Corporation. All rights reserved.
+// Licensed under the Apache License, Version 2.0 (the ""License"");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+// http://www.apache.org/licenses/LICENSE-2.0
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an ""AS IS"" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// Code generated by Microsoft (R) AutoRest Code Generator.Changes may cause incorrect behavior and will be lost if the code
+// is regenerated.
+
+using System;
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+[assembly: System.Reflection.AssemblyCompanyAttribute("Microsoft")]
+[assembly: System.Reflection.AssemblyCopyrightAttribute("Copyright © Microsoft")]
+[assembly: System.Reflection.AssemblyProductAttribute("Microsoft Azure PowerShell")]
+[assembly: System.Reflection.AssemblyTitleAttribute("Microsoft Azure PowerShell - Commvault")]
+[assembly: System.Reflection.AssemblyFileVersionAttribute("0.1.0")]
+[assembly: System.Reflection.AssemblyVersionAttribute("0.1.0")]
+[assembly: System.Runtime.InteropServices.ComVisibleAttribute(false)]
+[assembly: System.CLSCompliantAttribute(false)]
+
+

src/Commvault/Commvault.Autorest/README.md

@@ -0,0 +1,162 @@
+<!-- region Generated -->
+# Az.Commvault
+This directory contains the PowerShell module for the Commvault service.
+
+---
+## Info
+- Modifiable: yes
+- Generated: all
+- Committed: yes
+- Packaged: yes
+
+---
+## Detail
+This module was primarily generated via [AutoRest](https://github.com/Azure/autorest) using the [PowerShell](https://github.com/Azure/autorest.powershell) extension.
+
+## Module Requirements
+- [Az.Accounts module](https://www.powershellgallery.com/packages/Az.Accounts/), version 2.7.5 or greater
+
+## Authentication
+AutoRest does not generate authentication code for the module. Authentication is handled via Az.Accounts by altering the HTTP payload before it is sent.
+
+## Development
+For information on how to develop for `Az.Commvault`, see [how-to.md](how-to.md).
+<!-- endregion -->
+
+### AutoRest Configuration
+
+> see https://aka.ms/autorest
+
+```yaml
+# pin the swagger version by using the commit id instead of branch name
+commit: e91f0b95c03a435a7d745e8c70930aadce552d39
+require:
+# readme.azure.noprofile.md is the common configuration file
+  - $(this-folder)/../../readme.azure.noprofile.md
+  - $(repo)/specification/liftrcommvault/resource-manager/readme.md
+# If the swagger has not been put in the repo, you may uncomment the following line and refer to it locally
+# - (this-folder)/relative-path-to-your-local-readme.md
+
+try-require:
+  - $(repo)/specification/liftrcommvault/resource-manager/readme.powershell.md
+
+# generate from the stable API version
+tag: package-2026-09-30
+
+# For new RP, the version is 0.1.0
+module-version: 0.1.0
+# Normally, title is the service name
+title: Commvault
+service-name: Commvault
+subject-prefix: Commvault
+
+directive:
+  # Following are common directives which are normally required in all the RPs
+  # 1. Remove the unexpanded parameter set
+  # 2. For New-* cmdlets, ViaIdentity is not required
+
+  # Keep only the expanded, JsonFilePath and JsonString parameter sets of the create and update cmdlets.
+  - where:
+      variant: ^(Create|Update)(?!.*?(Expanded|JsonFilePath|JsonString))
+    remove: true
+  # New-* cmdlets create a resource by name, so the ViaIdentity parameter sets are not needed.
+  - where:
+      variant: ^CreateViaIdentity$|^CreateViaIdentityExpanded$
+    remove: true
+
+  # Remove the set-* cmdlet. New-* and Update-* cover the same operations.
+  - where:
+      verb: Set
+    remove: true
+
+  # The operationIds Plans_CreateOrupdate and ProtectionGroups_CreateOrupdate contain a typo in the swagger
+  # (lower-case "u"), which leaks into the cmdlet noun. Rename the nouns instead of changing the released API.
+  - where:
+      verb: New
+      subject: PlanOrupdate
+    set:
+      subject: Plan
+  # Same typo as above, for the protection group.
+  - where:
+      verb: New
+      subject: ProtectionGroupOrupdate
+    set:
+      subject: ProtectionGroup
+
+  # The operation group name SaaSOperationGroup leaks into the cmdlet noun. Use a readable name.
+  - where:
+      verb: Initialize
+      subject: SaaSOperationGroupResource
+    set:
+      subject: SaaS
+  # The operation group name ProtectedItemsOperationGroup leaks into the cmdlet noun, and the count is a read-only POST.
+  - where:
+      verb: Invoke
+      subject: CountProtectedItemsOperationGroup
+    set:
+      verb: Get
+      subject: ProtectedItemCount
+  # The body parameter set of this action is named exactly "Count". The test coverage analysis of the Azure PowerShell
+  # pipeline reads ParameterSets.Count of every parameter, which returns that parameter set instead of a number and
+  # fails every Test job. Remove the unexpanded set, as for the other cmdlets; -ResourceId, -JsonString and
+  # -JsonFilePath remain.
+  - where:
+      verb: Get
+      subject: ProtectedItemCount
+      variant: ^Count$
+    remove: true
+
+  # POST actions without a mapped verb are generated as Invoke-*. Use approved verbs that describe the action.
+  - where:
+      verb: Invoke
+      subject: LatestCloudAccountLinkedSaaS
+    set:
+      verb: Get
+      subject: CloudAccountLatestLinkedSaaS
+  # Linking a SaaS resource to the cloud account is a connect operation.
+  - where:
+      verb: Invoke
+      subject: LinkCloudAccountSaaS
+    set:
+      verb: Connect
+      subject: CloudAccountSaaS
+
+  # The Refresh action maps to the Update verb and would share Update-AzCommvaultStorage with the PUT-based update.
+  - where:
+      verb: Update
+      subject: Storage
+      variant: ^Refresh
+    set:
+      verb: Sync
+
+  # The parameter name Class ends with "s", which static analysis (rule 8410) reports as a plural noun.
+  # Use the name of the swagger enum type instead.
+  - where:
+      verb: New|Update
+      subject: Storage
+      parameter-name: Class
+    set:
+      parameter-name: StorageClassType
+
+  # These cmdlets are POST operations that only read data. Hide -WhatIf and -Confirm because they have no side effects.
+  - where:
+      verb: Get
+      subject: CloudAccountLatestLinkedSaaS|ProtectedItemCount|ProtectedItemRestorePoint
+    set:
+      suppress-should-process: true
+
+  # A cloud account has exactly one role mapping, named "default". The List parameter set has the same parameters as
+  # Get, so PowerShell can never select it. Remove it to keep the help unambiguous.
+  - where:
+      verb: Get
+      subject: RoleMapping
+      variant: ^List$
+    remove: true
+
+  # The swagger description of ProtectedItems_GetRestorePoints ("Limits used for creation of resources.") belongs to an
+  # unrelated operation and would become the cmdlet synopsis. Replace it with an accurate description.
+  - from: swagger-document
+    where: $.paths["/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Commvault.ContentStore/cloudAccounts/{cloudAccountName}/protectionGroups/{protectionGroupName}/protectedItems/{protectedItemName}/getRestorePoints"].post.description
+    transform: >-
+      return "Gets the restore points that are available for a protected item."
+```

src/Commvault/Commvault.Autorest/UX/Commvault.ContentStore/cloudAccounts-plans.json

@@ -0,0 +1,95 @@
+{
+  "resourceType": "cloudAccounts/plans",
+  "apiVersion": "2026-09-30",
+  "learnMore": {
+    "url": "https://learn.microsoft.com/powershell/module/az.commvault"
+  },
+  "commands": [
+    {
+      "name": "Get-AzCommvaultPlan",
+      "description": "Get a CommvaultPlan",
+      "path": "/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Commvault.ContentStore/cloudAccounts/{cloudAccountName}/plans/{planName}",
+      "help": {
+        "learnMore": {
+          "url": "https://learn.microsoft.com/powershell/module/az.commvault/get-azcommvaultplan"
+        },
+        "parameterSets": [
+          {
+            "parameters": [
+              "-CloudAccountName <String>",
+              "-Name <String>",
+              "-ResourceGroupName <String>",
+              "[-SubscriptionId <String[]>]"
+            ]
+          }
+        ]
+      },
+      "examples": [
+        {
+          "description": "Get a CommvaultPlan",
+          "parameters": [
+            {
+              "name": "-CloudAccountName",
+              "value": "[Path.cloudAccountName]"
+            },
+            {
+              "name": "-Name",
+              "value": "[Path.planName]"
+            },
+            {
+              "name": "-ResourceGroupName",
+              "value": "[Path.resourceGroupName]"
+            },
+            {
+              "name": "-SubscriptionId",
+              "value": "[Path.subscriptionId]"
+            }
+          ]
+        }
+      ]
+    },
+    {
+      "name": "Remove-AzCommvaultPlan",
+      "description": "Delete a CommvaultPlan",
+      "path": "/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Commvault.ContentStore/cloudAccounts/{cloudAccountName}/plans/{planName}",
+      "help": {
+        "learnMore": {
+          "url": "https://learn.microsoft.com/powershell/module/az.commvault/remove-azcommvaultplan"
+        },
+        "parameterSets": [
+          {
+            "parameters": [
+              "-CloudAccountName <String>",
+              "-Name <String>",
+              "-ResourceGroupName <String>",
+              "[-SubscriptionId <String>]"
+            ]
+          }
+        ]
+      },
+      "examples": [
+        {
+          "description": "Delete a CommvaultPlan",
+          "parameters": [
+            {
+              "name": "-CloudAccountName",
+              "value": "[Path.cloudAccountName]"
+            },
+            {
+              "name": "-Name",
+              "value": "[Path.planName]"
+            },
+            {
+              "name": "-ResourceGroupName",
+              "value": "[Path.resourceGroupName]"
+            },
+            {
+              "name": "-SubscriptionId",
+              "value": "[Path.subscriptionId]"
+            }
+          ]
+        }
+      ]
+    }
+  ]
+}