Report: MAS BDB Apollo parts have some blockages

[JonnyOThan]

I'm having a bit of trouble using the MAS iva with the BDB Apollo CM.
As shown in the above photo, when using the KSA IVA on both the CM and LM sides, I have a clear path through from the CM to LM
However, when using the MAS IVA on the CM with the KSA (or any other iva, including stock) on the LM, there is a block in the tunnel.
I'm assuming that there is some offset in the placement of the MAS IVA relative to the LM iva since it's physically closer to me when Im using the MAS iva, but I'm not really sure where to look. Any ideas? Thanks in advance.

Parts in standard configuration (stacked in this order):
Apollo CM - bluedog_apollo_CrewPod
Apollo CM Main parachute - bluedog_Apollo_MainChute
Apollo CM Drogue parachute - bluedog_Apollo_DrogueChute
Apollo CM parachute cover - bluedog_Apollo_ParachuteCover
Apollo Active docking mechanism - bluedog_Apollo_ProbeDockingPort
Apollo passive docking mechanism - bluedog_Apollo_ConeDockingPort
Apollo LM ascent cockpit - bluedog_LM_Ascent_Cockpit

KSP - 2025-05-19T103756.753.log.zip

[JonnyOThan]

The MAS IVAs in question here are for the stock mk1-3 pod, which has different dimensions than the Kane. Reviva offers this as an option just because it "kind of" works.

Specifically, the problem here seems to be that the mk1-3 IVA is placed too far forwards relative to the part so the crew tunnel in its nose doesn't align with where the Kane's attachnode is:

The mk1-3 is also taller than the Kane, so simply pushing it backwards would result in the bottom of the IVA sticking out the bottom of the part - but at least that would likely be better than the current situation.

However, fixing this would probably need to be done in reviva, and it doesn't currently (I think) support providing offsets to the internals per subtype.