Rol-la · Oct 14, 2026 · Oct 5, 2026
diff --git a/.github/workflows/build-and-publish.yml b/.github/workflows/build-and-publish.yml
@@ -8,6 +8,4 @@ on:
 jobs:
   build_and_deploy:
       uses: sensirion/.github/.github/workflows/driver.python.pypi_publish.yml@main
-      secrets:
-        PYPI_API_TOKEN: ${{ secrets.PYPI_API_TOKEN }}
-
+      secrets: inherit
diff --git a/.github/workflows/build-docs.yml b/.github/workflows/build-docs.yml
@@ -8,3 +8,5 @@ on:
 jobs:
   documentation:
       uses: sensirion/.github/.github/workflows/driver.python.documentation.yml@main
+      with:
+        use-project-requirements: true
diff --git a/CHANGELOG.md b/CHANGELOG.md
@@ -5,11 +5,17 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 ## [Unreleased] 
 
+## [1.0.1] - 2025-8-28
+
+### Added
+
+- Changed start_measurement example-value to enum
 ## [1.0.0] - 2025-8-25
 
 ### Added
 
 - Inital release of SPS30 driver
 
-[Unreleased]: https://github.com/Sensirion/python-uart-sps30/compare/1.0.0...HEAD
+[Unreleased]: https://github.com/Sensirion/python-uart-sps30/compare/1.0.1...HEAD
+[1.0.1]: https://github.com/Sensirion/python-uart-sps30/compare/1.0.0...1.0.1
 [1.0.0]: https://github.com/Sensirion/python-uart-sps30/releases/tag/1.0.0
diff --git a/LICENSE b/LICENSE
@@ -1,6 +1,6 @@
 BSD 3-Clause License
 
-Copyright (c) 2025, Sensirion AG
+Copyright (c) 2026, Sensirion AG
 All rights reserved.
 
 Redistribution and use in source and binary forms, with or without

diff --git a/MANIFEST.in b/MANIFEST.in
diff --git a/ci/checkin_doc.sh b/ci/checkin_doc.sh
diff --git a/ci/set_git_config.sh b/ci/set_git_config.sh
diff --git a/docs/build-documentation.rst b/docs/build-documentation.rst
@@ -5,10 +5,5 @@ The documentation is built with `Sphinx <http://www.sphinx-doc.org>`_:
 
 .. code-block:: bash
 
-    python setup.py install                        # Install package
-    pip install -r docs/requirements.txt           # Install requirements
-    cd docs                                        # Change to docs folder
-    make html                                      # Build documentation
-
-
-The generated documentation is located in docs/_build/html.
+    python -m pip install .[docs]           # Install doc requirements
+    sphinx-build -b html docs docs/_build/html     # Build documentation
diff --git a/docs/conf.py b/docs/conf.py
@@ -4,11 +4,14 @@
 # list see the documentation:
 # https://www.sphinx-doc.org/en/master/usage/configuration.html
 
+
 import os
 import sys
 from datetime import datetime
 
-import pkg_resources
+import importlib.metadata as metadata
+import sphinx_tabs.tabs
+
 import sphinx.ext.autodoc
 
 import sensirion_uart_sps30
@@ -17,16 +20,16 @@
 sys.path.insert(0, os.path.abspath(os.path.join(os.path.dirname(__file__), '..')))
 
 # -- Project information -----------------------------------------------------
-distribution = pkg_resources.get_distribution('sensirion_uart_sps30')
+distribution = metadata.distribution("sensirion_uart_sps30")
 
-project = u'sensirion_uart_sps30'
+project = distribution.name
 copyright = u'{} Sensirion AG, Switzerland'.format(datetime.now().year)
 author = 'Sensirion AG'
 
 # The short X.Y version
-version = sensirion_uart_sps30.__version__
+version = distribution.version
 # The full version, including alpha/beta/rc tags
-release = sensirion_uart_sps30.__version__
+release = distribution.version
 
 # -- General configuration ---------------------------------------------------
 
@@ -36,6 +39,7 @@
 extensions = [
     'sphinx.ext.autodoc',
     'sphinx.ext.viewcode',
+    'sphinx_tabs.tabs',
     'sphinx.ext.inheritance_diagram',
     'sphinx.ext.githubpages',
     'sphinx.ext.intersphinx',

diff --git a/docs/dev-setup.rst b/docs/dev-setup.rst
@@ -0,0 +1,45 @@
+To prepare your development environment, check out the repository,
+create a Python virtual environment, and activate it.
+Then install the driver in editable mode using `pip`.
+
+Check out the Git repository to your local machine:
+
+.. code-block:: console
+
+   git clone <url-of-driver-repository>
+   cd <checkout-folder>
+
+Create a Python virtual environment:
+
+.. code-block:: console
+
+   python -m venv .venv
+
+Activate the virtual environment:
+
+.. tabs::
+
+   .. group-tab:: Bash
+
+      .. code-block:: console
+
+         source .venv/bin/activate
+
+   .. group-tab:: PowerShell
+
+      .. code-block:: console
+
+         .venv\Scripts\Activate.ps1
+
+   .. group-tab:: Command Prompt
+
+      .. code-block:: console
+
+         .venv\Scripts\activate.bat
+
+Install the driver in editable mode together with the development dependencies:
+
+.. code-block:: console
+
+   python -m pip install -e .
+
diff --git a/docs/development.rst b/docs/development.rst
@@ -1,6 +1,10 @@
 Development
 ===========
 
+For development, you first need to prepare your setup.
+
+.. include:: dev-setup.rst
+
 .. toctree::
 
    run-tests

diff --git a/docs/driver-installation.rst b/docs/driver-installation.rst
@@ -0,0 +1,37 @@
+The driver installation consists of creating a Python virtual environment,
+activating it, and installing the driver using `pip`. 
+
+Create a Python virtual environment:
+
+.. code-block:: console
+
+   python -m venv .venv
+
+Activate the virtual environment:
+
+.. tabs::
+
+   .. group-tab:: Bash
+
+
+      .. code-block:: console
+
+         source .venv/bin/activate
+
+   .. group-tab:: PowerShell
+
+      .. code-block:: console
+
+         .venv\Scripts\Activate.ps1
+
+   .. group-tab:: Command Prompt
+
+      .. code-block:: console
+
+         .venv\Scripts\activate.bat
+
+Install the driver:
+
+.. code-block:: console
+
+   python -m pip install sensirion_uart_sps30
diff --git a/docs/execute-measurements.rst b/docs/execute-measurements.rst
@@ -1,11 +1,13 @@
-Execute measurements
-====================
+Install the SPS30 Driver
+------------------------
 
-The following steps show how to use this driver to execute a simple measurement on a Windows system.
+.. include:: driver-installation.rst
 
-1. Install the SPS30 sensor driver and all required packages as described in :ref:`Installation`.
-2. Connect the SPS30 sensor to your system with the serial USB cable.
-3. Run the example script from the root of the repository.
+Run Usage-Example
+-----------------
+
+1. Connect the SPS30 sensor to your system with the serial USB cable.
+2. Run the example script from the root of the repository.
 
    By default the script assumes the sensor is connected to COM1 serial port. If this is different on your system,
    pass the port in use with the :code:`--serial-port` parameter as outlined below.
@@ -15,7 +17,7 @@ The following steps show how to use this driver to execute a simple measurement
     python examples/example_usage_uart_sps30.py --serial-port <your COM port>
 
 Example script
---------------
+~~~~~~~~~~~~~~
 
 .. literalinclude:: ../examples/example_usage_uart_sps30.py
     :language: python
diff --git a/docs/installation.rst b/docs/installation.rst
@@ -3,10 +3,7 @@
 Installation
 ============
 
-The package can be installed with pip:
+It is assumed that you have a working Python installation on your system. 
+If not, please install Python first including `pip <https://pip.pypa.io/en/stable/installation/>`_.
 
-.. sourcecode:: bash
-
-    pip install sensirion_uart_sps30
-
-Recommended usage is within a virtualenv.
+.. include:: driver-installation.rst
diff --git a/docs/quickstart.rst b/docs/quickstart.rst
@@ -1,6 +1,10 @@
 Quick Start
 ===========
 
+Learn how to quickly get started with the SPS30 and perform your first measurements using
+the provided usage examples.
+
+
 .. toctree::
 
    execute-measurements

diff --git a/docs/requirements.txt b/docs/requirements.txt
@@ -1,4 +1,5 @@
 click==8.0.4
 jinja2~=3.1.0
 sphinx~=7.1.0
+sphinx-tabs~=3.5.0
 sphinx_rtd_theme~=1.3.0
diff --git a/examples/example_usage_uart_sps30.py b/examples/example_usage_uart_sps30.py
@@ -1,13 +1,13 @@
 #!/usr/bin/env python
 # -*- coding: utf-8 -*-
 #
-# (c) Copyright 2025 Sensirion AG, Switzerland
+# (c) Copyright 2026 Sensirion AG, Switzerland
 #
 #     THIS FILE IS AUTOMATICALLY GENERATED!
 #
-# Generator:     sensirion-driver-generator 1.3.3
+# Generator:     sensirion-driver-generator 1.9.3
 # Product:       sps30
-# Model-Version: 1.0.1
+# Model-Version: 1.0.2
 #
 
 import time
@@ -35,7 +35,7 @@
     product_type = sensor.read_product_type()
     print(f"product_type: {product_type}; "
           )
-    sensor.start_measurement(OutputFormat(261))
+    sensor.start_measurement(OutputFormat.OUTPUT_FORMAT_UINT16)
     for i in range(50):
         try:
             time.sleep(1.0)

diff --git a/metadata.yml b/metadata.yml
@@ -1,7 +1,7 @@
-# driver generation metadata
-generator_version: 1.3.3
-model_version: 1.0.1
-dg_status: released
-is_manually_modified: false
-first_generated: '2025-08-15 14:57'
-last_generated: '2025-08-25 12:22'
+# driver generation metadata
+generator_version: 1.9.3
+model_version: 1.0.2
+dg_status: released
+is_manually_modified: false
+first_generated: '2025-08-15 14:57'
+last_generated: '2026-10-05 08:44'