cpufreq: apple: Add the T6050 thermal-owned profile

Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml

@@ -84,6 +84,16 @@ required:
   - reg
   - '#performance-domain-cells'
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: apple,t6050-cluster-cpufreq
+    then:
+      required:
+        - apple,firmware-managed-thermal
+
 additionalProperties: false
 
 examples:

drivers/cpufreq/apple-soc-cpufreq.c

@@ -206,6 +206,7 @@ struct apple_soc_cpufreq_info {
 	/* Fail closed when the DT describes no fast die-temperature limit. */
 	bool needs_thermal_policy;
 	bool needs_thermal_owner;
+	bool needs_firmware_thermal_control;
 	u32 transition_timeout_us;
 	/* Highest P-state allowed without a thermal policy; 0 if not capped. */
 	u32 max_unmanaged_pstate;
@@ -340,6 +341,16 @@ static const struct apple_soc_cpufreq_info soc_t8132_info = {
 	.ps1_shift = APPLE_DVFS_CMD_PS1_SHIFT,
 };
 
+/* Command-state readback, not a measurement of the clock frequency. */
+static const struct apple_soc_cpufreq_info soc_t6050_info = {
+	.verify_transition = true,
+	.needs_firmware_thermal_control = true,
+	.transition_timeout_us = 2000,
+	.max_pstate = 31,
+	.ps1_mask = APPLE_DVFS_CMD_PS1,
+	.ps1_shift = APPLE_DVFS_CMD_PS1_SHIFT,
+};
+
 static const struct apple_soc_cpufreq_info soc_default_info = {
 	.has_ps2 = false,
 	.max_pstate = 15,
@@ -373,6 +384,10 @@ static const struct of_device_id apple_soc_cpufreq_of_match[] __maybe_unused = {
 		.compatible = "apple,t8140-cluster-cpufreq",
 		.data = &soc_t8140_info,
 	},
+	{
+		.compatible = "apple,t6050-cluster-cpufreq",
+		.data = &soc_t6050_info,
+	},
 	{
 		.compatible = "apple,t8142-cluster-cpufreq",
 		.data = &soc_t8142_info,
@@ -1355,6 +1370,14 @@ static int apple_soc_cpufreq_init(struct cpufreq_policy *policy)
 		goto out_free_priv;
 	}
 
+	/* The boot producer must retain and qualify firmware thermal control. */
+	if (info->needs_firmware_thermal_control &&
+	    !of_property_read_bool(cluster, "apple,firmware-managed-thermal")) {
+		dev_err(cpu_dev, "firmware thermal ownership is not declared\n");
+		ret = -ENODEV;
+		goto out_iounmap;
+	}
+
 	ret = dev_pm_opp_of_cpumask_add_table(policy->cpus);
 	if (ret < 0) {
 		dev_err(cpu_dev, "%s: failed to add OPP table: %d\n", __func__, ret);