linux-qcom-6.18 : update to tag qcom-6.18.y-20260812 v6.18.37 by sgaud-quic · Pull Request #2872 · qualcomm-linux/meta-qcom

Salendarsingh Gaud (sgaud-quic) · 2026-08-04T09:40:43Z

Move to the latest linux-qcom-6.18 release tag qcom-6.18.y-20260812

Changelog:
QCLINUX: Revert "WORKAROUND: power: sequencing: qcom-wcn: skip BT devices without bt-enable GPIO" (5a472e184be9)
QCLINUX: Revert "WORKAROUND: power: sequencing: qcom-wcn: skip BT devices without bt-enable GPIO" (06f2b9c60834)
FROMLIST: arm64: dts: qcom: purwa-iot-evk: Describe the PCIe M.2 Key E connector
FROMLIST: arm64: dts: qcom: hamoa-iot-evk: Describe the PCIe M.2 Key E connector
QCLINUX: Revert "WORKAROUND: arm64: dts: qcom: purwa-iot-evk: support Bluetooth over both USB and UART"
QCLINUX: Revert "WORKAROUND: arm64: dts: qcom: hamoa-iot-evk: support Bluetooth over both USB and UART"
FROMLIST: arm64: dts: qcom: hamoa: Add compatible to the PCIe Root Port
FROMLIST: arm64: dts: qcom: hamoa: Add graph port/endpoint anchors to pcie4_port0 and uart14
FROMLIST: power: sequencing: pcie-m2: Deassert W_DISABLE2# when no UART serdev is created
FROMGIT: power: sequencing: pcie-m2: Match WCN6855 and WCN7851 UART BT variants by subdevice ID
UPSTREAM: pinctrl: qcom: Replace open coded eoi call with irq_chip_eoi_parent()
UPSTREAM: pinctrl: qcom: Register functions before enabling pinctrl
UPSTREAM: pinctrl: qcom: Drop redundant intr_target_reg on modern SoCs
FROMLIST: wifi: ath11k: unregister PM notifier on QMI init failure path
FROMLIST: wifi: ath11k: fix NULL dereference in ahb remove when QMI init incomplete
FROMLIST: wifi: ath11k: fix sporadic WLAN initialization failures
UPSTREAM: interconnect: qcom: qcs8300: fix the num_links for nsp icc node
FROMLIST: arm64: dts: qcom: shikra: Enable CDSP cooling
FROMLIST: coresight: tnoc: Bind Aggregator TNOC on the platform bus
FROMLIST: dt-bindings: arm: coresight-tnoc: Bind on platform bus instead of AMBA
BACKPORT: coresight-tnoc: Add runtime PM support for Interconnect TNOC
BACKPORT: coresight-tnoc: add platform driver to support Interconnect TNOC
BACKPORT: dt-bindings: arm: qcom: Add Coresight Interconnect TNOC
BACKPORT: arm64: dts: qcom: hamoa: Add label properties to CoreSight devices
BACKPORT: arm64: dts: qcom: talos: Add label properties to CoreSight devices
BACKPORT: arm64: dts: qcom: kodiak: Add label properties to CoreSight devices
BACKPORT: arm64: dts: qcom: monaco: Add label properties to CoreSight devices
BACKPORT: arm64: dts: qcom: lemans: Add label properties to CoreSight devices
BACKPORT: arm64: dts: qcom: lemans: enable static TPDM
FROMLIST: arm64: dts: qcom: purwa-evk: add DP0/DP1 audio playback support
FROMGIT: arm64: dts: qcom: lemans-evk: Describe the PCIe M.2 Key E connector
FROMGIT: arm64: dts: qcom: lemans: Add compatible to the PCIe Root Port
FROMGIT: power: sequencing: pwrseq-pcie-m2: Add QCC2072 BT PCI device ID
UPSTREAM: power: sequencing: pcie-m2: Sort PCI device IDs in ascending order
UPSTREAM: power: sequencing: pcie-m2: Add PCI ID 0x1103 for WCN6855 Bluetooth
UPSTREAM: wifi: ath12k: fix EHT TX MCS limitation due to wrong 20 MHz-only parsing
WORKAROUND: power: sequencing: qcom-wcn: skip BT devices without bt-enable GPIO
UPSTREAM: Bluetooth: qca: enable pwrseq support for WCN39xx devices
UPSTREAM: power: sequencing: qcom-wcn: add support for WCN39xx
UPSTREAM: regulator: dt-bindings: qcom,wcn3990-pmu: describe PMUs on WCN39xx
FROMLIST: arm64: dts: qcom: shikra: Add WCN3988 PMU and fix WiFi/BT supply routing
BACKPORT: arm64: dts: qcom: sa8775p: Add reg and clocks for QoS configuration
BACKPORT: interconnect: qcom: sa8775p: enable QoS configuration
UPSTREAM: dt-bindings: interconnect: add reg and clocks properties to enable QoS on sa8775p
UPSTREAM: arm64: dts: qcom: qcs8300: Add clocks for QoS configuration
UPSTREAM: interconnect: qcom: qcs8300: enable QoS configuration
UPSTREAM: dt-bindings: interconnect: qcom,qcs8300-rpmh: add clocks property to enable QoS
UPSTREAM: interconnect: qcom: kaanapali: Drop redundant link_nodes casts
UPSTREAM: arm64: dts: qcom: talos: Add clocks for QoS configuration
UPSTREAM: interconnect: qcom: qcs615: enable QoS configuration
UPSTREAM: dt-bindings: interconnect: qcom,qcs615-rpmh: add clocks property to enable QoS
UPSTREAM: interconnect: qcom: icc-rpmh: drop support for non-dynamic IDS
UPSTREAM: interconnect: qcom: sm8750: convert to dynamic IDs
UPSTREAM: interconnect: qcom: sm8650: convert to dynamic IDs
UPSTREAM: interconnect: qcom: sm8550: convert to dynamic IDs
UPSTREAM: interconnect: qcom: sm8450: convert to dynamic IDs
UPSTREAM: interconnect: qcom: sm8350: convert to dynamic IDs
UPSTREAM: interconnect: qcom: sm8150: convert to dynamic IDs
UPSTREAM: interconnect: qcom: sm7150: convert to dynamic IDs
UPSTREAM: interconnect: qcom: sm6350: convert to dynamic IDs
BACKPORT: interconnect: qcom: sdx75: convert to dynamic IDs
UPSTREAM: interconnect: qcom: sdx65: convert to dynamic IDs
UPSTREAM: interconnect: qcom: sdx55: convert to dynamic IDs
UPSTREAM: interconnect: qcom: sdm670: convert to dynamic IDs
UPSTREAM: interconnect: qcom: sc7180: convert to dynamic IDs
UPSTREAM: interconnect: qcom: sar2130p: convert to dynamic IDs
UPSTREAM: interconnect: qcom: qdu1000: convert to dynamic IDs
UPSTREAM: interconnect: qcom: qcs8300: convert to dynamic IDs
UPSTREAM: interconnect: qcom: qcs615: convert to dynamic IDs
UPSTREAM: interconnect: qcom: x1e80100: convert to dynamic IDs
UPSTREAM: interconnect: qcom: sm8250: convert to dynamic IDs
UPSTREAM: interconnect: qcom: sdm845: convert to dynamic IDs
UPSTREAM: interconnect: qcom: sc8280xp: convert to dynamic IDs
UPSTREAM: interconnect: qcom: sc8180x: convert to dynamic IDs
UPSTREAM: interconnect: qcom: sc7280: convert to dynamic IDs
UPSTREAM: interconnect: qcom: icc-rpmh: convert link_nodes to dynamic array
FROMLIST: wifi: ath12k: Fix low MLO RX throughput on WCN7850
FROMLIST: wifi: ath12k: change MAC buffer ring size to 4096

github-actions · 2026-08-04T15:28:00Z

Test run workflow

Test jobs for commit `99cbd8c`

qcom-distro
Pass: 296 | Fail: 0 | Total: 342

nodistro
Pass: 10 | Fail: 0 | Total: 10

qcom-distro_linux-qcom-6.18
Pass: 238 | Fail: 0 | Total: 259

test-reporting-app · 2026-08-04T15:28:43Z

Test Results

117 files 698 suites 8h 0m 54s ⏱️
157 tests 157 ✅ 0 💤 0 ❌
4 499 runs 4 432 ✅ 67 💤 0 ❌

Results for commit 99cbd8c.

♻️ This comment has been updated with latest results.

Dmitry Baryshkov (lumag) · 2026-08-04T21:35:08Z

WORKAROUND: power: sequencing: qcom-wcn: skip BT devices without bt-enable GPIO

Why can't we pick up the upstream solution?

qcomlnxci · 2026-08-05T00:58:31Z

Test Coral run workflow

Test jobs for commit `dee324c`

qcomdistro: multimedia image-prop
Pass: 34 | Fail: 0 | Total: 34
qcomdistro: multimedia image
Pass: 9 | Fail: 0 | Total: 9

Cheng Jiang (che-jiang) · 2026-08-05T06:45:40Z

Hi Dmitry Baryshkov (@lumag),

This workaround is currently used on Hamoa and Purwa platforms. At present, neither platform has migrated to the M.2 solution yet, although the transition is ongoing on QLI 0.0.

On Hamoa and Purwa, both UART and USB Bluetooth interfaces are required, so BT_EN must remain permanently asserted (pulled high). Without this workaround, the UART Bluetooth driver may enter the code path that toggles BT_EN during Bluetooth on/off operations, which can lead to a state mismatch between the host and the controller.

Once Hamoa and Purwa fully transition to the M.2 solution, this workaround will no longer be required and can be removed.

Dmitry Baryshkov (lumag) · 2026-08-05T15:00:37Z

Cheng Jiang (@che-jiang) this is being committed to QLI 0.0, the master branch of meta-qcom.

Dmitry Baryshkov (lumag) · 2026-08-05T15:03:44Z

Also... Is it the same workaround that broke wcn39xx BT devices?

Cheng Jiang (che-jiang) · 2026-08-06T01:48:15Z

Yes, it's also the workaround for wcn39xx BT devices

Dmitry Baryshkov (lumag) · 2026-08-06T08:14:51Z

Yes, it's also the workaround for wcn39xx BT devices

WCN39xx doesn't need workarounds. One of the versions of the patch broke wcn39xx, that's why I'm asking.

Cheng Jiang (che-jiang) · 2026-08-06T09:54:48Z

Hi Dmitry Baryshkov (@lumag),

There is misunderstanding here. WCN39xx doesn't need workaround. But Hamoa needs. This workaround for Hamoa is qualcomm-linux/kernel@24d48e0. But it breaks the wcn39xx. The WORKAROUND: power: sequencing: qcom-wcn: skip BT devices without bt-enable GPIO is used to fix it.

Dmitry Baryshkov (lumag) · 2026-08-06T22:55:34Z

Hi Dmitry Baryshkov (Dmitry Baryshkov (@lumag)),

There is misunderstanding here. WCN39xx doesn't need workaround. But Hamoa needs. This workaround for Hamoa is qualcomm-linux/kernel@24d48e0. But it breaks the wcn39xx. The WORKAROUND: power: sequencing: qcom-wcn: skip BT devices without bt-enable GPIO is used to fix it.

So, you have a workaround for the workaround? And it's not even annotated with Fixes tags, how one would identify it as a fix for the earlier buggy commit? Please stop this, revert the previous buggy workaround and apply the upstream solution.

Cheng Jiang (che-jiang) · 2026-08-07T01:38:31Z

Hi Dmitry Baryshkov (Dmitry Baryshkov (Dmitry Baryshkov (@lumag))),
There is misunderstanding here. WCN39xx doesn't need workaround. But Hamoa needs. This workaround for Hamoa is qualcomm-linux/kernel@24d48e0. But it breaks the wcn39xx. The WORKAROUND: power: sequencing: qcom-wcn: skip BT devices without bt-enable GPIO is used to fix it.

So, you have a workaround for the workaround? And it's not even annotated with Fixes tags, how one would identify it as a fix for the earlier buggy commit? Please stop this, revert the previous buggy workaround and apply the upstream solution.

The first workaround doesn't cover the wcn39xx case, so after merging, it causes the wcn39xx doesn't work with pwrseq. Then we update the workaround. This is the history.

For upstream solution, the changes for Haoma/Purwa are under review on QLI 0.0, we will create PR on QLI2.0 once it's merged on 0.0

Dmitry Baryshkov (lumag) · 2026-08-07T06:23:23Z

The first workaround doesn't cover the wcn39xx case, so after merging, it causes the wcn39xx doesn't work with pwrseq. Then we update the workaround. This is the history.

Then fix the history. The second commit doesn't have any notion that it fixes a previous mistake. Fix it.

For upstream solution, the changes for Haoma/Purwa are under review on QLI 0.0, we will create PR on QLI2.0 once it's merged on 0.0

I don't see any PR here, for QLI 0.0 aka meta-qcom/master. Are you sure what you are talking about?

Dmitry Baryshkov (lumag) · 2026-08-07T06:24:38Z

Also, could you please clarify, what is the difference between UPSTREAM: and FROMGIT:?

Cheng Jiang (che-jiang) · 2026-08-10T03:18:54Z

The first workaround doesn't cover the wcn39xx case, so after merging, it causes the wcn39xx doesn't work with pwrseq. Then we update the workaround. This is the history.

Then fix the history. The second commit doesn't have any notion that it fixes a previous mistake. Fix it.

Sure, we will try to add the info in the commit message.

For upstream solution, the changes for Haoma/Purwa are under review on QLI 0.0, we will create PR on QLI2.0 once it's merged on 0.0

I don't see any PR here, for QLI 0.0 aka meta-qcom/master. Are you sure what you are talking about?

Hi Dmitry Baryshkov (@lumag) ,

As mentioned, the workarounds are used to enable BT on Hamoa and Purwa. These are the new changes for it. They are still on kernel topic and under reivew.
qualcomm-linux/kernel-topics#1627
qualcomm-linux/kernel-topics#1628
qualcomm-linux/kernel-topics#1629

Cheng Jiang (che-jiang) · 2026-08-10T03:27:50Z

Also, could you please clarify, what is the difference between UPSTREAM: and FROMGIT:?

FROMGIT: Patch merged upstream on a (sub)-maintainer tree
UPSTREAM: Patch is part of upstream branches, applies cleanly

Dmitry Baryshkov (lumag) · 2026-08-10T08:23:05Z

The guideline is from here https://qualcomm-confluence.atlassian.net/wiki/spaces/LK/pages/1715176918/Linux+Developer+First

Don't post excerpts from the internal docs or links to them. Also I asked for an explanation not a quote from the docs.

Cheng Jiang (che-jiang) · 2026-08-10T09:57:17Z

Don't post excerpts from the internal docs or links to them. Also I asked for an explanation not a quote from the docs.

Hi Dmitry Baryshkov (@lumag),

Update the comment. Some changes are only on a (sub)-maintainer tree when we add to QLI, so the FROMGIT is used.

WORKAROUND: power: sequencing: qcom-wcn: skip BT devices without bt-enable GPIO is already merged in this PR
qualcomm-linux/kernel#817. How can we update the commit message in the change? Can we add some comment in the PR? Thanks!

Dmitry Baryshkov (lumag) · 2026-08-10T10:00:26Z

Also, could you please clarify, what is the difference between UPSTREAM: and FROMGIT:?

FROMGIT: Patch merged upstream on a (sub)-maintainer tree UPSTREAM: Patch is part of upstream branches, applies cleanly

And what does that mean? What is "upstream branch"? The branch in qcom-next? Then this tag tells us nothing.

Dmitry Baryshkov (lumag) · 2026-08-10T10:00:52Z

WORKAROUND: power: sequencing: qcom-wcn: skip BT devices without bt-enable GPIO is already merged in this PR
qualcomm-linux/kernel#817. How can we update the commit message in the change? Can we add some comment in the PR? Thanks!

Rewrite Git history, be more careful next time.

Cheng Jiang (che-jiang) · 2026-08-10T11:54:45Z

Also, could you please clarify, what is the difference between UPSTREAM: and FROMGIT:?

FROMGIT: Patch merged upstream on a (sub)-maintainer tree UPSTREAM: Patch is part of upstream branches, applies cleanly

And what does that mean? What is "upstream branch"? The branch in qcom-next? Then this tag tells us nothing.

No, it's not qcom-next. It's a subsystem maintainer tree (or a maintainer's staging tree). FROMGIT means the patch has been picked up by a subsystem maintainer tree (e.g. qcom DTS tree) but has not yet landed in Linux mainline. UPSTREAM means it is already in mainline.

Cheng Jiang (che-jiang) · 2026-08-10T11:55:02Z

WORKAROUND: power: sequencing: qcom-wcn: skip BT devices without bt-enable GPIO is already merged in this PR
qualcomm-linux/kernel#817. How can we update the commit message in the change? Can we add some comment in the PR? Thanks!

Rewrite Git history, be more careful next time.

Thank you! We will take care next time.

Cheng Jiang (che-jiang) · 2026-08-11T02:55:03Z

Hi Dmitry Baryshkov (@lumag),

Update the commit message to the following, could you please help to review? Thanks!

WORKAROUND: power: sequencing: qcom-wcn: skip BT devices without bt-enable GPIO only when required

The workaround introduced in commit 24d48e096b0a ("WORKAROUND: Bluetooth:
support Bluetooth over both USB and UART") added a check in
pwrseq-qcom-wcn to skip matching a "bluetooth" consumer node when no
bt-enable GPIO is configured. This was intended to handle Hamoa boards
where BT_EN is absent from the WCN7850 sequencer node in the USB-BT
path.

However, the check was applied unconditionally to all platforms. This
breaks WCN39xx series chips (e.g. WCN3990) that have no separate
BT/WLAN enable pins by design: when bt-enable GPIO is legitimately
absent from the DT, the sequencer refuses to match the "bluetooth"
consumer and the driver falls back to the legacy Bluetooth path instead
of going through pwrseq.

Add a bt_gpio_required flag to the per-platform data to indicate that a
chip's BT enable path requires a dedicated GPIO. Only skip matching the
"bluetooth" device node when this flag is set and bt_gpio is absent.

Set bt_gpio_required for WCN6855 and WCN7850 which do require a
dedicated BT enable GPIO, leaving WCN3990 and other WCN39xx chips
unaffected.

Fixes: 24d48e096b0a ("WORKAROUND: Bluetooth: support Bluetooth over both USB and UART")

Salendarsingh Gaud (sgaud-quic) · 2026-08-11T09:44:40Z

WORKAROUND: power: sequencing: qcom-wcn: skip BT devices without bt-enable GPIO is already merged in this PR
qualcomm-linux/kernel#817. How can we update the commit message in the change? Can we add some comment in the PR? Thanks!

Rewrite Git history, be more careful next time.

Dmitry Baryshkov (@lumag) to avoid rewriting Git history, can we revert this commit and bring back commit with proper commit message ?

Cheng Jiang (che-jiang) · 2026-08-12T02:26:28Z

Hi @sgaud-quic/ Dmitry Baryshkov (@lumag),

As two of the following PR are merged on QLI0.0. Shall we switch to the M.2 solution and revert all the workarounds?

qualcomm-linux/kernel-topics#1627 -- revert the workaround, wait for merge
qualcomm-linux/kernel-topics#1628 -- merged
qualcomm-linux/kernel-topics#1629 -- merged

Salendarsingh Gaud (sgaud-quic) · 2026-08-12T17:11:43Z

Hi @sgaud-quic/ Dmitry Baryshkov (Dmitry Baryshkov (@lumag)),

As two of the following PR are merged on QLI0.0. Shall we switch to the M.2 solution and revert all the workarounds?

qualcomm-linux/kernel-topics#1627 -- revert the workaround, wait for merge qualcomm-linux/kernel-topics#1628 -- merged qualcomm-linux/kernel-topics#1629 -- merged

Dmitry Baryshkov (@lumag) New tag has all the workaround changes reverted, please help review.

weiden (WeiDeng-weiden) · 2026-08-13T10:12:34Z

BT_FW_KMD_Service test case is currently failing on Hamoa and Purwa IoT EVK due to this kernel update.

Root cause: The test script checks for static DT compatible strings (qcom,wcn7850-bt, qcom,wcn6855-bt, etc.) to confirm BT presence. With the M.2 Key E connector support (kernel#940), the BT device is dynamically created at runtime by pwrseq-pcie-m2 — no static BT DT node exists. BT itself is fully functional (hci0 UP RUNNING, firmware loaded).

Failing check in BT_FW_KMD_Service/run.sh:

[FAIL] DT node/compatible for BT NOT found.

Raised testkit issue for the fix: qualcomm-linux/qcom-linux-testkit#533

BT_SCAN passes as it relies on HCI presence rather than DT node lookup.

qcomlnxci · 2026-08-13T12:26:30Z

Test Coral run workflow

Test jobs for commit `43dd4c1`

qcomdistro: multimedia image-prop
Pass: 52 | Fail: 0 | Total: 52
qcomdistro: multimedia image
Pass: 9 | Fail: 0 | Total: 9

Salendarsingh Gaud (sgaud-quic) · 2026-08-13T12:31:06Z

Dmitry Baryshkov (@lumag) / Ricardo Salveti (@ricardosalveti) / Viswanath Kraleti (@vkraleti) / Anuj Mittal (@anujm1) can you please help review the PR.

Dmitry Baryshkov (lumag) · 2026-08-15T04:13:02Z

Dmitry Baryshkov (Dmitry Baryshkov (@lumag)) / Ricardo Salveti (Ricardo Salveti (@ricardosalveti)) / Viswanath Kraleti (Viswanath Kraleti (@vkraleti)) / Anuj Mittal (Anuj Mittal (@anujm1)) can you please help review the PR.

You didn't respond to the error analysis:

BT_FW_KMD_Service test case is currently failing on Hamoa and Purwa IoT EVK due to this kernel update.

Salendarsingh Gaud (sgaud-quic) · 2026-08-15T06:00:10Z

Dmitry Baryshkov (Dmitry Baryshkov (Dmitry Baryshkov (@lumag))) / Ricardo Salveti (Ricardo Salveti (Ricardo Salveti (@ricardosalveti))) / Viswanath Kraleti (Viswanath Kraleti (Viswanath Kraleti (@vkraleti))) / Anuj Mittal (Anuj Mittal (Anuj Mittal (@anujm1))) can you please help review the PR.

You didn't respond to the error analysis:

BT_FW_KMD_Service test case is currently failing on Hamoa and Purwa IoT EVK due to this kernel update.

This needs to be fixed from test side, below PR would fix this :
#2913

Salendarsingh Gaud (sgaud-quic) · 2026-08-17T06:08:44Z

Dmitry Baryshkov (Dmitry Baryshkov (Dmitry Baryshkov (Dmitry Baryshkov (@lumag)))) / Ricardo Salveti (Ricardo Salveti (Ricardo Salveti (Ricardo Salveti (@ricardosalveti)))) / Viswanath Kraleti (Viswanath Kraleti (Viswanath Kraleti (Viswanath Kraleti (@vkraleti)))) / Anuj Mittal (Anuj Mittal (Anuj Mittal (Anuj Mittal (@anujm1)))) can you please help review the PR.

You didn't respond to the error analysis:

BT_FW_KMD_Service test case is currently failing on Hamoa and Purwa IoT EVK due to this kernel update.

This needs to be fixed from test side, below PR would fix this : #2913

Dmitry Baryshkov (@lumag) any further inputs needed here ?

weiden (WeiDeng-weiden) · 2026-08-17T07:53:30Z

Dmitry Baryshkov (Dmitry Baryshkov (Dmitry Baryshkov (@lumag))) / Ricardo Salveti (Ricardo Salveti (Ricardo Salveti (@ricardosalveti))) / Viswanath Kraleti (Viswanath Kraleti (Viswanath Kraleti (@vkraleti))) / Anuj Mittal (Anuj Mittal (Anuj Mittal (@anujm1))) can you please help review the PR.

You didn't respond to the error analysis:

BT_FW_KMD_Service test case is currently failing on Hamoa and Purwa IoT EVK due to this kernel update.

Hi Dmitry Baryshkov (@lumag) ,
Root cause of this issue is: The test script checks for static DT compatible strings (qcom,wcn7850-bt, qcom,wcn6855-bt, etc.) to confirm BT presence. With the M.2 Key E connector support (kernel#940), the BT device is dynamically created at runtime by pwrseq-pcie-m2. BT itself is fully functional (hci0 UP RUNNING, firmware loaded).
Below PR would fix this: qualcomm-linux/qcom-linux-testkit#534 and been included in #2913, I think it is not a issue now.

Dmitry Baryshkov (lumag) · 2026-08-18T11:20:35Z

I think it is not a issue now.

We can't merge the kernel which breaks on some of the tests.

Move to the latest linux-qcom-6.18 release tag qcom-6.18.y-20260812 Changelog: QCLINUX: Revert "WORKAROUND: power: sequencing: qcom-wcn: skip BT devices without bt-enable GPIO" (5a472e184be9) QCLINUX: Revert "WORKAROUND: power: sequencing: qcom-wcn: skip BT devices without bt-enable GPIO" (06f2b9c60834) FROMLIST: arm64: dts: qcom: purwa-iot-evk: Describe the PCIe M.2 Key E connector FROMLIST: arm64: dts: qcom: hamoa-iot-evk: Describe the PCIe M.2 Key E connector QCLINUX: Revert "WORKAROUND: arm64: dts: qcom: purwa-iot-evk: support Bluetooth over both USB and UART" QCLINUX: Revert "WORKAROUND: arm64: dts: qcom: hamoa-iot-evk: support Bluetooth over both USB and UART" FROMLIST: arm64: dts: qcom: hamoa: Add compatible to the PCIe Root Port FROMLIST: arm64: dts: qcom: hamoa: Add graph port/endpoint anchors to pcie4_port0 and uart14 FROMLIST: power: sequencing: pcie-m2: Deassert W_DISABLE2# when no UART serdev is created FROMGIT: power: sequencing: pcie-m2: Match WCN6855 and WCN7851 UART BT variants by subdevice ID UPSTREAM: pinctrl: qcom: Replace open coded eoi call with irq_chip_eoi_parent() UPSTREAM: pinctrl: qcom: Register functions before enabling pinctrl UPSTREAM: pinctrl: qcom: Drop redundant intr_target_reg on modern SoCs FROMLIST: wifi: ath11k: unregister PM notifier on QMI init failure path FROMLIST: wifi: ath11k: fix NULL dereference in ahb remove when QMI init incomplete FROMLIST: wifi: ath11k: fix sporadic WLAN initialization failures UPSTREAM: interconnect: qcom: qcs8300: fix the num_links for nsp icc node FROMLIST: arm64: dts: qcom: shikra: Enable CDSP cooling FROMLIST: coresight: tnoc: Bind Aggregator TNOC on the platform bus FROMLIST: dt-bindings: arm: coresight-tnoc: Bind on platform bus instead of AMBA BACKPORT: coresight-tnoc: Add runtime PM support for Interconnect TNOC BACKPORT: coresight-tnoc: add platform driver to support Interconnect TNOC BACKPORT: dt-bindings: arm: qcom: Add Coresight Interconnect TNOC BACKPORT: arm64: dts: qcom: hamoa: Add label properties to CoreSight devices BACKPORT: arm64: dts: qcom: talos: Add label properties to CoreSight devices BACKPORT: arm64: dts: qcom: kodiak: Add label properties to CoreSight devices BACKPORT: arm64: dts: qcom: monaco: Add label properties to CoreSight devices BACKPORT: arm64: dts: qcom: lemans: Add label properties to CoreSight devices BACKPORT: arm64: dts: qcom: lemans: enable static TPDM FROMLIST: arm64: dts: qcom: purwa-evk: add DP0/DP1 audio playback support FROMGIT: arm64: dts: qcom: lemans-evk: Describe the PCIe M.2 Key E connector FROMGIT: arm64: dts: qcom: lemans: Add compatible to the PCIe Root Port FROMGIT: power: sequencing: pwrseq-pcie-m2: Add QCC2072 BT PCI device ID UPSTREAM: power: sequencing: pcie-m2: Sort PCI device IDs in ascending order UPSTREAM: power: sequencing: pcie-m2: Add PCI ID 0x1103 for WCN6855 Bluetooth UPSTREAM: wifi: ath12k: fix EHT TX MCS limitation due to wrong 20 MHz-only parsing WORKAROUND: power: sequencing: qcom-wcn: skip BT devices without bt-enable GPIO UPSTREAM: Bluetooth: qca: enable pwrseq support for WCN39xx devices UPSTREAM: power: sequencing: qcom-wcn: add support for WCN39xx UPSTREAM: regulator: dt-bindings: qcom,wcn3990-pmu: describe PMUs on WCN39xx FROMLIST: arm64: dts: qcom: shikra: Add WCN3988 PMU and fix WiFi/BT supply routing BACKPORT: arm64: dts: qcom: sa8775p: Add reg and clocks for QoS configuration BACKPORT: interconnect: qcom: sa8775p: enable QoS configuration UPSTREAM: dt-bindings: interconnect: add reg and clocks properties to enable QoS on sa8775p UPSTREAM: arm64: dts: qcom: qcs8300: Add clocks for QoS configuration UPSTREAM: interconnect: qcom: qcs8300: enable QoS configuration UPSTREAM: dt-bindings: interconnect: qcom,qcs8300-rpmh: add clocks property to enable QoS UPSTREAM: interconnect: qcom: kaanapali: Drop redundant link_nodes casts UPSTREAM: arm64: dts: qcom: talos: Add clocks for QoS configuration UPSTREAM: interconnect: qcom: qcs615: enable QoS configuration UPSTREAM: dt-bindings: interconnect: qcom,qcs615-rpmh: add clocks property to enable QoS UPSTREAM: interconnect: qcom: icc-rpmh: drop support for non-dynamic IDS UPSTREAM: interconnect: qcom: sm8750: convert to dynamic IDs UPSTREAM: interconnect: qcom: sm8650: convert to dynamic IDs UPSTREAM: interconnect: qcom: sm8550: convert to dynamic IDs UPSTREAM: interconnect: qcom: sm8450: convert to dynamic IDs UPSTREAM: interconnect: qcom: sm8350: convert to dynamic IDs UPSTREAM: interconnect: qcom: sm8150: convert to dynamic IDs UPSTREAM: interconnect: qcom: sm7150: convert to dynamic IDs UPSTREAM: interconnect: qcom: sm6350: convert to dynamic IDs BACKPORT: interconnect: qcom: sdx75: convert to dynamic IDs UPSTREAM: interconnect: qcom: sdx65: convert to dynamic IDs UPSTREAM: interconnect: qcom: sdx55: convert to dynamic IDs UPSTREAM: interconnect: qcom: sdm670: convert to dynamic IDs UPSTREAM: interconnect: qcom: sc7180: convert to dynamic IDs UPSTREAM: interconnect: qcom: sar2130p: convert to dynamic IDs UPSTREAM: interconnect: qcom: qdu1000: convert to dynamic IDs UPSTREAM: interconnect: qcom: qcs8300: convert to dynamic IDs UPSTREAM: interconnect: qcom: qcs615: convert to dynamic IDs UPSTREAM: interconnect: qcom: x1e80100: convert to dynamic IDs UPSTREAM: interconnect: qcom: sm8250: convert to dynamic IDs UPSTREAM: interconnect: qcom: sdm845: convert to dynamic IDs UPSTREAM: interconnect: qcom: sc8280xp: convert to dynamic IDs UPSTREAM: interconnect: qcom: sc8180x: convert to dynamic IDs UPSTREAM: interconnect: qcom: sc7280: convert to dynamic IDs UPSTREAM: interconnect: qcom: icc-rpmh: convert link_nodes to dynamic array FROMLIST: wifi: ath12k: Fix low MLO RX throughput on WCN7850 FROMLIST: wifi: ath12k: change MAC buffer ring size to 4096 Signed-off-by: Salendarsingh Gaud <sgaud@qti.qualcomm.com>

Salendarsingh Gaud (sgaud-quic) · 2026-08-24T12:36:42Z

Current failure are from mainline kernel not relevant to this PR :

Audio record on Hamoa : https://lava.infra.foundries.io/scheduler/job/376640#results_6401

This is a lava reporting issue, actual test case passed :
https://lava.infra.foundries.io/scheduler/job/376636#results_6283

qcomlnxci · 2026-08-24T15:02:28Z

Test Coral run workflow

Test jobs for commit `99cbd8c`

qcomdistro: multimedia image
Pass: 9 | Fail: 0 | Total: 9
qcomdistro: multimedia image-prop
Pass: 40 | Fail: 2 | Others: 2 | Total: 44

qcomlnxci · 2026-08-24T20:09:24Z

Test Coral run workflow

Test jobs for commit `99cbd8c`

qcomdistro: multimedia image
Pass: 9 | Fail: 0 | Total: 9
qcomdistro: multimedia image-prop
Pass: 44 | Fail: 0 | Total: 44

Salendarsingh Gaud (sgaud-quic) · 2026-08-24T21:40:28Z

@lumag/ Ricardo Salveti (@ricardosalveti) / Anuj Mittal (@anujm1) / Viswanath Kraleti (@vkraleti) / sbanerjeeqc could you please help review this PR.

quic-yocto-ci · 2026-08-25T12:05:19Z

Successfully created backport PR for wrynose:

[Backport wrynose] linux-qcom-6.18 : update to tag qcom-6.18.y-20260812 v6.18.37 #3001

…12 v6.18.37 (#3001) # Description Backport of #2872 to `wrynose`.

Salendarsingh Gaud (sgaud-quic) requested review from Anuj Mittal (anujm1), Koen Kooi (koenkooi), Dmitry Baryshkov (lumag), Nicolas Dechesne (ndechesne), Ricardo Salveti (ricardosalveti) and Viswanath Kraleti (vkraleti) as code owners August 4, 2026 09:40

Ricardo Salveti (ricardosalveti) added the backport wrynose label Aug 4, 2026

Salendarsingh Gaud (sgaud-quic) force-pushed the promote-qcom-6.18.y-20260804 branch from dee324c to 43dd4c1 Compare August 12, 2026 17:10

Salendarsingh Gaud (sgaud-quic) changed the title ~~linux-qcom-6.18 : update to tag qcom-6.18.y-20260804 v6.18.37~~ linux-qcom-6.18 : update to tag qcom-6.18.y-20260812 v6.18.37 Aug 12, 2026

weiden (WeiDeng-weiden) mentioned this pull request Aug 13, 2026

BT_FW_KMD_Service: DT node/compatible check fails for M.2 E-key connector boards (Hamoa, Purwa, lemans-evk) qualcomm-linux/qcom-linux-testkit#533

Closed

Salendarsingh Gaud (sgaud-quic) force-pushed the promote-qcom-6.18.y-20260804 branch from 43dd4c1 to 99cbd8c Compare August 24, 2026 06:00

Ricardo Salveti (ricardosalveti) approved these changes Aug 25, 2026

View reviewed changes

Viswanath Kraleti (vkraleti) approved these changes Aug 25, 2026

View reviewed changes

Dmitry Baryshkov (lumag) merged commit 896dff1 into qualcomm-linux:master Aug 25, 2026
275 checks passed

quic-yocto-ci mentioned this pull request Aug 25, 2026

[Backport wrynose] linux-qcom-6.18 : update to tag qcom-6.18.y-20260812 v6.18.37 #3001

Merged

Dmitry Baryshkov (lumag) added a commit that referenced this pull request Aug 25, 2026

[Backport wrynose] linux-qcom-6.18 : update to tag qcom-6.18.y-202608…

3ef3260

…12 v6.18.37 (#3001) # Description Backport of #2872 to `wrynose`.

Shoudi Li (shoudil) mentioned this pull request Aug 27, 2026

Failed to boot to shell with UFS error on purwa core-image-base #2757

Closed

Conversation

Salendarsingh Gaud (sgaud-quic) commented Aug 4, 2026 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

github-actions Bot commented Aug 4, 2026 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Test run workflow

Test jobs for commit 99cbd8c

Uh oh!

test-reporting-app Bot commented Aug 4, 2026 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Test Results

Uh oh!

Dmitry Baryshkov (lumag) commented Aug 4, 2026

Uh oh!

qcomlnxci commented Aug 5, 2026

Test Coral run workflow

Test jobs for commit dee324c

Uh oh!

Cheng Jiang (che-jiang) commented Aug 5, 2026

Uh oh!

Dmitry Baryshkov (lumag) commented Aug 5, 2026

Uh oh!

Dmitry Baryshkov (lumag) commented Aug 5, 2026

Uh oh!

Cheng Jiang (che-jiang) commented Aug 6, 2026

Uh oh!

Dmitry Baryshkov (lumag) commented Aug 6, 2026

Uh oh!

Cheng Jiang (che-jiang) commented Aug 6, 2026

Uh oh!

Dmitry Baryshkov (lumag) commented Aug 6, 2026

Uh oh!

Cheng Jiang (che-jiang) commented Aug 7, 2026

Uh oh!

Dmitry Baryshkov (lumag) commented Aug 7, 2026

Uh oh!

Dmitry Baryshkov (lumag) commented Aug 7, 2026

Uh oh!

Cheng Jiang (che-jiang) commented Aug 10, 2026

Uh oh!

Cheng Jiang (che-jiang) commented Aug 10, 2026 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

Dmitry Baryshkov (lumag) commented Aug 10, 2026

Uh oh!

Cheng Jiang (che-jiang) commented Aug 10, 2026

Uh oh!

Dmitry Baryshkov (lumag) commented Aug 10, 2026

Uh oh!

Dmitry Baryshkov (lumag) commented Aug 10, 2026

Uh oh!

Cheng Jiang (che-jiang) commented Aug 10, 2026

Uh oh!

Cheng Jiang (che-jiang) commented Aug 10, 2026

Uh oh!

Cheng Jiang (che-jiang) commented Aug 11, 2026

Uh oh!

Salendarsingh Gaud (sgaud-quic) commented Aug 11, 2026

Uh oh!

Cheng Jiang (che-jiang) commented Aug 12, 2026

Uh oh!

Salendarsingh Gaud (sgaud-quic) commented Aug 12, 2026 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

weiden (WeiDeng-weiden) commented Aug 13, 2026

Uh oh!

qcomlnxci commented Aug 13, 2026

Test Coral run workflow

Test jobs for commit 43dd4c1

Uh oh!

Salendarsingh Gaud (sgaud-quic) commented Aug 13, 2026

Uh oh!

Dmitry Baryshkov (lumag) commented Aug 15, 2026

Uh oh!

Salendarsingh Gaud (sgaud-quic) commented Aug 15, 2026

Uh oh!

Salendarsingh Gaud (sgaud-quic) commented Aug 17, 2026

Uh oh!

weiden (WeiDeng-weiden) commented Aug 17, 2026 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Salendarsingh Gaud (sgaud-quic) commented Aug 4, 2026 •

edited

Loading

github-actions Bot commented Aug 4, 2026 •

edited

Loading

Test jobs for commit `99cbd8c`

test-reporting-app Bot commented Aug 4, 2026 •

edited

Loading

Test jobs for commit `dee324c`

Cheng Jiang (che-jiang) commented Aug 10, 2026 •

edited

Loading

Salendarsingh Gaud (sgaud-quic) commented Aug 12, 2026 •

edited

Loading

Test jobs for commit `43dd4c1`

weiden (WeiDeng-weiden) commented Aug 17, 2026 •

edited

Loading

Test jobs for commit `99cbd8c`

Test jobs for commit `99cbd8c`