Topic/my feature branch - #72
Open
Deepak kumar (deepaknasir) wants to merge 15 commits into
Open
Deepak kumar (deepaknasir) wants to merge 15 commits into
Deepak kumar (deepaknasir) wants to merge 15 commits into
Conversation
…files Nord was the only Wildcat chip in the tree, so its GIC base addresses and DARE-TZ TZDRAM region settings were placed in the shared Wildcat architecture layer. Adding a second Wildcat chip with different addresses makes the architecture layer the wrong home for them. Move GICD_BASE and GICR_BASE from arch_config.h to nord/target_config.h, and move the DARE-TZ TZDRAM region configuration from qcom-arch.mk to nord/target.mk, so the shared Wildcat layer stays chip-agnostic. Add SPDX licence identifier to qcom-arch.mk while there. Signed-off-by: Pawan Rai <pawarai@qti.qualcomm.com> Reviewed-by: Harshal Dev <harshal.dev@oss.qualcomm.com> Tested-by: Harshal Dev <harshal.dev@oss.qualcomm.com> Reviewed-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com>
Cacao is a Qualcomm XR chipset in the Wildcat architecture family, featuring an octa-core Oryon CPU, a GICv4 interrupt controller, and DARE-TZ in-line memory encryption managed by the TME root-of-trust. OP-TEE runs in a DARE-TZ protected DRAM region and does not need a separate DARE driver. Testing: Tested on Rumi. Signed-off-by: Pawan Rai <pawarai@qti.qualcomm.com> Reviewed-by: Harshal Dev <harshal.dev@oss.qualcomm.com> Tested-by: Harshal Dev <harshal.dev@oss.qualcomm.com> Reviewed-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com>
Add PLATFORM=qcom-cacao build to the CI. Reviewed-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com> Signed-off-by: Pawan Rai <pawarai@qti.qualcomm.com>
Shikra is a Qualcomm IoT chipset in the Bruin architecture family, featuring a quad-core Cortex-A55 CPU and a GICv3 interrupt controller. Tested optee boot-up on Shikra board. Signed-off-by: Pawan Rai <pawarai@qti.qualcomm.com> Reviewed-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com> Reviewed-by: Harshal Dev <harshal.dev@oss.qualcomm.com> Tested-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Add PLATFORM=qcom-shikra build to the CI. Signed-off-by: Pawan Rai <pawarai@qti.qualcomm.com> Reviewed-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com>
Fix the address mappings for DRAM on Nord IQ-10. DRAM0 has a size of 0x8000 0000 while DRAM1 starts at 0x8 8000 0000 with a size of 0x7 8000 0000. Also, there exists a DRAM2 region which the Linux kernel maps as HIGHMEM for allocating memory for userspace applications. Since this region starting at 0x88 0000 0000 is not mapped by OP-TEE, TEE_IOC_SHM_REGISTER ioctl fails because OP-TEE doesn't recognize it as Non-secure memory. Validated by running xtest 1002 after building OP-TEE with CFG_TEE_CORE_EMBED_INTERNAL_TESTS=y which was failing otherwise. Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Add a pseudo-TA for the Qualcomm Inline Crypto Engine (ICE) that lets the
kernel dm-crypt/inline-crypt path program raw software keys into ICE key
slots for inline storage encryption.
Two commands are exposed:
- PTA_CMD_ICE_INVALIDATE_KEY: wipe a key slot with random data.
- PTA_CMD_ICE_SET_CONFIG_KEY: program key/salt, cipher mode and
data-unit size for AES-XTS-128/256 and AES-CBC-128/256.
Only the REE kernel may open a session on this PTA. The PTA is gated by
CFG_ICE_FS_ENC_PTA and is not built unless a platform enables it.
Signed-off-by: Harikrishna <hart@qti.qualcomm.com>
Reviewed-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com>
Reviewed-by: Selvam Sathappan Periakaruppan <speriaka@qti.qualcomm.com>
Reviewed-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Turn on CFG_ICE_FS_ENC_PTA for ipq52xx and ipq96xx, which carry the SDCC ICE block used for eMMC inline encryption, and point the generic ICE_LUT_KEYS at the SDCC LUT-keys register region. Testing: Booted to the kernel, dispatched an ICE software-key config from the kernel to this PTA, then wrote and read back a file on the encrypted filesystem and confirmed matching md5sums. Tested-on: IPQ52xx, IPQ96xx Signed-off-by: Harikrishna <hart@qti.qualcomm.com> Reviewed-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com> Reviewed-by: Selvam Sathappan Periakaruppan <speriaka@qti.qualcomm.com> Reviewed-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
This file already lives under drivers/clk/qcom/, so repeating qcom in its own name is redundant, and inconsistent with how other vendor subdirectories (sam/, stm32) name their own files. Signed-off-by: Naresh Nunna <nnunna@qti.qualcomm.com> Assisted-by: Claude:opus-5 Reviewed-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com> Reviewed-by: Selvam Sathappan Periakaruppan <speriaka@qti.qualcomm.com> Reviewed-by: Vinod Kumar Amanaganti <vinoda@qti.qualcomm.com>
The QUP SE clock driver's CX/MX voltage vote needs a rail's supported corner ordinals, which for ARC resources live in the auxiliary data blob RPMh commands index into rather than a raw voltage. Add cmd_db_get_aux() to fetch it by resource ID. Signed-off-by: Naresh Nunna <nnunna@qti.qualcomm.com> Assisted-by: Claude:opus-5 Reviewed-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com> Reviewed-by: Selvam Sathappan Periakaruppan <speriaka@qti.qualcomm.com> Reviewed-by: Vinod Kumar Amanaganti <vinoda@qti.qualcomm.com>
Some clock rates need a higher CX/MX voltage corner than others, and a corner may be shared by multiple RCGs; rail_vote() refcounts per corner over RPMh so each rail is only raised for as long as some caller actually needs it, and CX/MX are resolved independently since they don't necessarily share the same hlvl encoding. Signed-off-by: Naresh Nunna <nnunna@qti.qualcomm.com> Assisted-by: Claude:opus-5 Assisted-by: Claude:sonnet-5 Reviewed-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com> Reviewed-by: Selvam Sathappan Periakaruppan <speriaka@qti.qualcomm.com> Reviewed-by: Vinod Kumar Amanaganti <vinoda@qti.qualcomm.com>
Lemans has no secure DT, so register each QUPv3 SE clock as a plain struct clk, modeling the PLL/RCG/branch as separate objects so the generic framework's own refcounting governs each PLL vote. Signed-off-by: Naresh Nunna <nnunna@qti.qualcomm.com> Assisted-by: Claude:opus-5 Assisted-by: Claude:sonnet-5 Reviewed-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com> Reviewed-by: Selvam Sathappan Periakaruppan <speriaka@qti.qualcomm.com> Reviewed-by: Vinod Kumar Amanaganti <vinoda@qti.qualcomm.com>
Update the load address for OP-TEE by shifting it upwards by 3 MB to ensure that Uboot-SPL is loaded below it in the memory map instead of being loaded above it at 0xbc48 0000 since this region is used for loading Trusted Apps. This re-arrangement also opens up memory below OP-TEE which can be used by Uboot-SPL for loading the Secure Partition manifests in the form of an FDT blob, the blob would be read by TF-A/OP-TEE when FF-A is enabled. Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
…ging plat-qcom: wildcat: nord: Update the load address for OPTEE
Add Nord PAS platform support for the HPASS0-2 and NSPSS0-3 remote processors. Register the NSPSS and HPASS subsystem with their PAS IDs, base addresses, clock groups, reset sequencing and enable them for fw_start operations. Signed-off-by: “Deepak <kudee@qti.qualcomm.com>
Author
|
depends on qualcomm-linux#41 |
Contributor
|
Hi Deepak kumar (@deepaknasir), Requesting to mark this PR as "draft" since its dependent on another PR which is already in "draft" state. When the dependent PR is merged/when this PR is ready to be reviewed, you can again mark this as "ready for review". |
Sumit Garg (b49020)
force-pushed
the
qcom-next
branch
from
September 30, 2026 12:25
5fde2c5 to
9b756a1
Compare
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
7 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Enable HPASS/NSPSS for Nord,
Not tested, it is dependent on #41