BMP280 and BME280 I2C driver for ESP32 boards using the IDF toolchain.
The BME688 Arduino Library is a comprehensive driver for interfacing with the Bosch BME688 environmental sensor. This library provides functionality to measure temperature, pressure, humidity, and gas resistance, supporting various oversampling settings and operation modes.
Bosch Sensortec BMP280 High Level Platform Independent C Driver
custom driver for BMP280
An easy-to-use library for BNO055 9-Axis inertial measurement unit of BOSCH company, for Raspberry pi using Wiring-Pi Library!
BMP280 Digital Pressure Sensor Driver for Python3
In this project, the Bosch BMP280 sensor is integrated with an STM32 microcontroller using bare-metal, low-level register-based firmware. Communication is handled via I2C and SPI protocols. The firmware captures sensor data and outputs it to a 16x2 LCD display, demonstrating effective real-time data acquisition and display.
ESP32 - Board with BME280 - Sensor and "new 3.5.0" Bosch-Library in ESP-IDF
Python I2C driver for the Bosch Sensortec BMP family pressure sensors.
SETLevel: Object based mono camera object model.
Uncertainty estimation of the calibrated output of the Bosch BME680 temperature, pressure, and humidity sensor.
Driver for Bosch BME280 Combined sensor
Communication with Bosch Sensortec Application Board 3.0 / 3.1 from python 3
BNO-055 sensor library for Raspberry Pi Pico.
Smart Air Quality Station based on NodeMCU v1.0 (ESP8266) and Bosch BME680 using BSEC Arduino Library to get IAQ (Indoor Air Quality) and other environmental data. WiFi and MQTT is used to send data to the Home Assistant.
STM32 I2C HAL & LL library for the Bosch BMP180 sensor
Bosch BME280 - pressure, temperature and humidity sensor library for STM32.
Measurement of temperature, pressure and altitude using Bosch BMP280 interfaced with NodeMCU ESP8266. results are displayed on 0.96"oled
To associate your repository with the bosch-sensor topic, visit your repo's landing page and select "manage topics."