Repository navigation
syslog / net debug - configurable via gui #4646
Description
Hello,
currently using syslog /net debug you need to add
#define WLED_DEBUG
#define WLED_DEBUG_HOST "192.168.1.3"
#define WLED_DEBUG_PORT 514
and than you can enable/disable it in the gui at info.
--
it would be nice if the syslog feature can be:
-
- just added via i.e. #define WLED_NET_DEBUG or #define WLED_SYSLOG, and the options above can be added as optional
-
- in the WLED GUI under /settings/sync it would be nice to
-- Enable Syslog , maybe also under the INFO menu where you can currently enable/disable the normal debug -Button
-- Option to enter IP
-- Option to enter Port
- in the WLED GUI under /settings/sync it would be nice to
-
- It would be nice to either to be able to enable the syslog option AND the normal Serial output, OR be able to select which one to use. Or disable both
Thank you very much.
Activity
KrX3D commentedon Apr 19, 2025
i also noticed that disabling Debug in the gui:
and rebooting the devices, enables it again
blazoncek commentedon Apr 19, 2025
That is intentional. It is enabled by default.
KrX3D commentedon Apr 19, 2025
Hmm ok, for me i like to have it compiled with the option and than have it enabled whenever i want it.
blazoncek commentedon Apr 19, 2025
If debugging is implemented with QuickDebug (enhanced with net debugging) then having an option to permanently disable debugging from UI would make sense, otherwise it doesn't as you normally don't use debug version.
netmindz commentedon Apr 20, 2025
As far as I'm aware, WLED's net debug does not use the syslog protocol
KrX3D commentedon Apr 26, 2025
will be solved with
#4664